From 3d328e4bfc34a90c8ce14bcaee1120c5840dd925 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Wed, 2 Mar 2016 03:57:21 -0300 Subject: uboot-chiliboard: add new package to [libre] --- ...x-compiler-gcc5.h-to-fix-builds-with-gcc5.patch | 93 ++ .../0002-ARM-asm-io.h-use-static-inline.patch | 76 + ...mon-main.c-make-show_boot_progress-__weak.patch | 31 + ...mmon-board_f-cosmetic-use-__weak-for-leds.patch | 109 ++ .../uboot-chiliboard/0005-chiliboard-support.patch | 1685 ++++++++++++++++++++ .../0006-parabola-arm-modifications.patch | 177 ++ .../0006-parabola-arm-modifications.patch.new | 174 ++ libre/uboot-chiliboard/PKGBUILD | 59 + libre/uboot-chiliboard/uEnv.txt | 1 + libre/uboot-chiliboard/uboot-chiliboard.install | 32 + 10 files changed, 2437 insertions(+) create mode 100644 libre/uboot-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch create mode 100644 libre/uboot-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch create mode 100644 libre/uboot-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch create mode 100644 libre/uboot-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch create mode 100644 libre/uboot-chiliboard/0005-chiliboard-support.patch create mode 100644 libre/uboot-chiliboard/0006-parabola-arm-modifications.patch create mode 100644 libre/uboot-chiliboard/0006-parabola-arm-modifications.patch.new create mode 100644 libre/uboot-chiliboard/PKGBUILD create mode 100644 libre/uboot-chiliboard/uEnv.txt create mode 100644 libre/uboot-chiliboard/uboot-chiliboard.install diff --git a/libre/uboot-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch b/libre/uboot-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch new file mode 100644 index 000000000..bdb6699e6 --- /dev/null +++ b/libre/uboot-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch @@ -0,0 +1,93 @@ +From 0a3f119b5221e16feb1cbe4036cc16d1dc4c194c Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Sat, 7 Feb 2015 22:52:40 +0100 +Subject: [PATCH 1/6] Add linux/compiler-gcc5.h to fix builds with gcc5 + +Add linux/compiler-gcc5/h from the kernel sources at: + +commit 5631b8fba640a4ab2f8a954f63a603fa34eda96b +Author: Steven Noonan +Date: Sat Oct 25 15:09:42 2014 -0700 + + compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles + +Signed-off-by: Hans de Goede +--- + include/linux/compiler-gcc5.h | 65 +++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 65 insertions(+) + create mode 100644 include/linux/compiler-gcc5.h + +diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h +new file mode 100644 +index 0000000..c8c5659 +--- /dev/null ++++ b/include/linux/compiler-gcc5.h +@@ -0,0 +1,65 @@ ++#ifndef __LINUX_COMPILER_H ++#error "Please don't include directly, include instead." ++#endif ++ ++#define __used __attribute__((__used__)) ++#define __must_check __attribute__((warn_unused_result)) ++#define __compiler_offsetof(a, b) __builtin_offsetof(a, b) ++ ++/* Mark functions as cold. gcc will assume any path leading to a call ++ to them will be unlikely. This means a lot of manual unlikely()s ++ are unnecessary now for any paths leading to the usual suspects ++ like BUG(), printk(), panic() etc. [but let's keep them for now for ++ older compilers] ++ ++ Early snapshots of gcc 4.3 don't support this and we can't detect this ++ in the preprocessor, but we can live with this because they're unreleased. ++ Maketime probing would be overkill here. ++ ++ gcc also has a __attribute__((__hot__)) to move hot functions into ++ a special section, but I don't see any sense in this right now in ++ the kernel context */ ++#define __cold __attribute__((__cold__)) ++ ++#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) ++ ++#ifndef __CHECKER__ ++# define __compiletime_warning(message) __attribute__((warning(message))) ++# define __compiletime_error(message) __attribute__((error(message))) ++#endif /* __CHECKER__ */ ++ ++/* ++ * Mark a position in code as unreachable. This can be used to ++ * suppress control flow warnings after asm blocks that transfer ++ * control elsewhere. ++ * ++ * Early snapshots of gcc 4.5 don't support this and we can't detect ++ * this in the preprocessor, but we can live with this because they're ++ * unreleased. Really, we need to have autoconf for the kernel. ++ */ ++#define unreachable() __builtin_unreachable() ++ ++/* Mark a function definition as prohibited from being cloned. */ ++#define __noclone __attribute__((__noclone__)) ++ ++/* ++ * Tell the optimizer that something else uses this function or variable. ++ */ ++#define __visible __attribute__((externally_visible)) ++ ++/* ++ * GCC 'asm goto' miscompiles certain code sequences: ++ * ++ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 ++ * ++ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. ++ * ++ * (asm goto is automatically volatile - the naming reflects this.) ++ */ ++#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) ++ ++#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP ++#define __HAVE_BUILTIN_BSWAP32__ ++#define __HAVE_BUILTIN_BSWAP64__ ++#define __HAVE_BUILTIN_BSWAP16__ ++#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ +-- +2.5.0 + diff --git a/libre/uboot-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch b/libre/uboot-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch new file mode 100644 index 000000000..6ec3d82fc --- /dev/null +++ b/libre/uboot-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch @@ -0,0 +1,76 @@ +From a29b67a36a2b59acfc9cb7adc6e3bc06c490d4ee Mon Sep 17 00:00:00 2001 +From: Jeroen Hofstee +Date: Sun, 22 Jun 2014 23:10:39 +0200 +Subject: [PATCH 2/6] ARM:asm:io.h use static inline + +When compiling u-boot with W=1 the extern inline void for +read* is likely causing the most noise. gcc / clang will +warn there is never a actual declaration for these functions. +Instead of declaring these extern make them static inline so +it is actually declared. + +cc: Albert ARIBAUD +Signed-off-by: Jeroen Hofstee +--- + arch/arm/include/asm/io.h | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h +index 214f3ea..dc6138a 100644 +--- a/arch/arm/include/asm/io.h ++++ b/arch/arm/include/asm/io.h +@@ -77,7 +77,7 @@ static inline phys_addr_t virt_to_phys(void * vaddr) + #define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v)) + #define __arch_putq(v,a) (*(volatile unsigned long long *)(a) = (v)) + +-extern inline void __raw_writesb(unsigned long addr, const void *data, ++static inline void __raw_writesb(unsigned long addr, const void *data, + int bytelen) + { + uint8_t *buf = (uint8_t *)data; +@@ -85,7 +85,7 @@ extern inline void __raw_writesb(unsigned long addr, const void *data, + __arch_putb(*buf++, addr); + } + +-extern inline void __raw_writesw(unsigned long addr, const void *data, ++static inline void __raw_writesw(unsigned long addr, const void *data, + int wordlen) + { + uint16_t *buf = (uint16_t *)data; +@@ -93,7 +93,7 @@ extern inline void __raw_writesw(unsigned long addr, const void *data, + __arch_putw(*buf++, addr); + } + +-extern inline void __raw_writesl(unsigned long addr, const void *data, ++static inline void __raw_writesl(unsigned long addr, const void *data, + int longlen) + { + uint32_t *buf = (uint32_t *)data; +@@ -101,21 +101,21 @@ extern inline void __raw_writesl(unsigned long addr, const void *data, + __arch_putl(*buf++, addr); + } + +-extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen) ++static inline void __raw_readsb(unsigned long addr, void *data, int bytelen) + { + uint8_t *buf = (uint8_t *)data; + while(bytelen--) + *buf++ = __arch_getb(addr); + } + +-extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen) ++static inline void __raw_readsw(unsigned long addr, void *data, int wordlen) + { + uint16_t *buf = (uint16_t *)data; + while(wordlen--) + *buf++ = __arch_getw(addr); + } + +-extern inline void __raw_readsl(unsigned long addr, void *data, int longlen) ++static inline void __raw_readsl(unsigned long addr, void *data, int longlen) + { + uint32_t *buf = (uint32_t *)data; + while(longlen--) +-- +2.5.0 + diff --git a/libre/uboot-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch b/libre/uboot-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch new file mode 100644 index 000000000..baf1efd5d --- /dev/null +++ b/libre/uboot-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch @@ -0,0 +1,31 @@ +From dc7efb77bbd59224855713a554bb3721568a85c6 Mon Sep 17 00:00:00 2001 +From: Jeroen Hofstee +Date: Thu, 26 Jun 2014 20:18:31 +0200 +Subject: [PATCH 3/6] common: main.c: make show_boot_progress __weak + +This not only looks a bit better it also prevents a +warning with W=1 (no previous prototype). + +Signed-off-by: Jeroen Hofstee +Acked-by: Simon Glass +--- + common/main.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +diff --git a/common/main.c b/common/main.c +index 32618f1..2979fbe 100644 +--- a/common/main.c ++++ b/common/main.c +@@ -17,8 +17,7 @@ DECLARE_GLOBAL_DATA_PTR; + /* + * Board-specific Platform code can reimplement show_boot_progress () if needed + */ +-void inline __show_boot_progress (int val) {} +-void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress"))); ++__weak void show_boot_progress(int val) {} + + static void modem_init(void) + { +-- +2.5.0 + diff --git a/libre/uboot-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch b/libre/uboot-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch new file mode 100644 index 000000000..f2237a229 --- /dev/null +++ b/libre/uboot-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch @@ -0,0 +1,109 @@ +From ea9b2d003712ae2c6158abb5c9f285f593e8fcb0 Mon Sep 17 00:00:00 2001 +From: Jeroen Hofstee +Date: Mon, 23 Jun 2014 23:20:19 +0200 +Subject: [PATCH 4/6] common: board_f: cosmetic use __weak for leds + +First of all this looks a lot better, but it also +prevents a gcc warning (W=1), that the weak function +has no previous prototype. + +cc: Simon Glass +Signed-off-by: Jeroen Hofstee +Acked-by: Simon Glass +--- + common/board_f.c | 29 ++++++++++------------------- + include/status_led.h | 22 +++++++++++----------- + 2 files changed, 21 insertions(+), 30 deletions(-) + +diff --git a/common/board_f.c b/common/board_f.c +index 4ea4cb2..bdab38e 100644 +--- a/common/board_f.c ++++ b/common/board_f.c +@@ -37,6 +37,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -78,25 +79,15 @@ DECLARE_GLOBAL_DATA_PTR; + ************************************************************************ + * May be supplied by boards if desired + */ +-inline void __coloured_LED_init(void) {} +-void coloured_LED_init(void) +- __attribute__((weak, alias("__coloured_LED_init"))); +-inline void __red_led_on(void) {} +-void red_led_on(void) __attribute__((weak, alias("__red_led_on"))); +-inline void __red_led_off(void) {} +-void red_led_off(void) __attribute__((weak, alias("__red_led_off"))); +-inline void __green_led_on(void) {} +-void green_led_on(void) __attribute__((weak, alias("__green_led_on"))); +-inline void __green_led_off(void) {} +-void green_led_off(void) __attribute__((weak, alias("__green_led_off"))); +-inline void __yellow_led_on(void) {} +-void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on"))); +-inline void __yellow_led_off(void) {} +-void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off"))); +-inline void __blue_led_on(void) {} +-void blue_led_on(void) __attribute__((weak, alias("__blue_led_on"))); +-inline void __blue_led_off(void) {} +-void blue_led_off(void) __attribute__((weak, alias("__blue_led_off"))); ++__weak void coloured_LED_init(void) {} ++__weak void red_led_on(void) {} ++__weak void red_led_off(void) {} ++__weak void green_led_on(void) {} ++__weak void green_led_off(void) {} ++__weak void yellow_led_on(void) {} ++__weak void yellow_led_off(void) {} ++__weak void blue_led_on(void) {} ++__weak void blue_led_off(void) {} + + /* + * Why is gd allocated a register? Prior to reloc it might be better to +diff --git a/include/status_led.h b/include/status_led.h +index 0eb91b8..b8aaaf7 100644 +--- a/include/status_led.h ++++ b/include/status_led.h +@@ -272,19 +272,21 @@ extern void __led_set (led_id_t mask, int state); + # include + #endif + ++#endif /* CONFIG_STATUS_LED */ ++ + /* + * Coloured LEDs API + */ + #ifndef __ASSEMBLY__ +-extern void coloured_LED_init (void); +-extern void red_led_on(void); +-extern void red_led_off(void); +-extern void green_led_on(void); +-extern void green_led_off(void); +-extern void yellow_led_on(void); +-extern void yellow_led_off(void); +-extern void blue_led_on(void); +-extern void blue_led_off(void); ++void coloured_LED_init(void); ++void red_led_on(void); ++void red_led_off(void); ++void green_led_on(void); ++void green_led_off(void); ++void yellow_led_on(void); ++void yellow_led_off(void); ++void blue_led_on(void); ++void blue_led_off(void); + #else + .extern LED_init + .extern red_led_on +@@ -297,6 +299,4 @@ extern void blue_led_off(void); + .extern blue_led_off + #endif + +-#endif /* CONFIG_STATUS_LED */ +- + #endif /* _STATUS_LED_H_ */ +-- +2.5.0 + diff --git a/libre/uboot-chiliboard/0005-chiliboard-support.patch b/libre/uboot-chiliboard/0005-chiliboard-support.patch new file mode 100644 index 000000000..cbe029a69 --- /dev/null +++ b/libre/uboot-chiliboard/0005-chiliboard-support.patch @@ -0,0 +1,1685 @@ +From 22efc5d711cf5a91a236b3a54f94cbcad0fc7b5e Mon Sep 17 00:00:00 2001 +From: Kevin Mihelich +Date: Sat, 29 Aug 2015 08:56:32 -0600 +Subject: [PATCH 5/6] chiliboard support + +--- + board/grinn/chiliboard/Makefile | 13 + + board/grinn/chiliboard/board.c | 447 +++++++++++++++++++ + board/grinn/chiliboard/board.h | 20 + + board/grinn/chiliboard/mux.c | 99 +++++ + board/grinn/chiliboard/u-boot.lds | 131 ++++++ + boards.cfg | 5 + + drivers/mtd/nand/omap_gpmc.c | 6 +- + include/configs/chiliboard.h | 878 ++++++++++++++++++++++++++++++++++++++ + 8 files changed, 1597 insertions(+), 2 deletions(-) + create mode 100644 board/grinn/chiliboard/Makefile + create mode 100644 board/grinn/chiliboard/board.c + create mode 100644 board/grinn/chiliboard/board.h + create mode 100644 board/grinn/chiliboard/mux.c + create mode 100644 board/grinn/chiliboard/u-boot.lds + create mode 100644 include/configs/chiliboard.h + +diff --git a/board/grinn/chiliboard/Makefile b/board/grinn/chiliboard/Makefile +new file mode 100644 +index 0000000..804ac37 +--- /dev/null ++++ b/board/grinn/chiliboard/Makefile +@@ -0,0 +1,13 @@ ++# ++# Makefile ++# ++# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),) ++obj-y := mux.o ++endif ++ ++obj-y += board.o +diff --git a/board/grinn/chiliboard/board.c b/board/grinn/chiliboard/board.c +new file mode 100644 +index 0000000..ed8ab63 +--- /dev/null ++++ b/board/grinn/chiliboard/board.c +@@ -0,0 +1,447 @@ ++/* ++ * board.c ++ * ++ * Board functions for Grinn chiliboard, AM335X based boards ++ * ++ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ ++ * ++ * Copyright (C) 2015, Grinn - http://www.grinn-global.com ++ * Grzegorz Glomb, g.glomb@grinn-global.com ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "board.h" ++ ++DECLARE_GLOBAL_DATA_PTR; ++#define HDR_NAME_LEN 8 ++ ++static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; ++ ++#ifndef CONFIG_SKIP_LOWLEVEL_INIT ++static const struct ddr_data ddr2_chilisom_gcs1_data = { ++ .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) | ++ (MT47H128M16RT25E_RD_DQS<<20) | ++ (MT47H128M16RT25E_RD_DQS<<10) | ++ (MT47H128M16RT25E_RD_DQS<<0)), ++ .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) | ++ (MT47H128M16RT25E_WR_DQS<<20) | ++ (MT47H128M16RT25E_WR_DQS<<10) | ++ (MT47H128M16RT25E_WR_DQS<<0)), ++ .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) | ++ (MT47H128M16RT25E_PHY_WRLVL<<20) | ++ (MT47H128M16RT25E_PHY_WRLVL<<10) | ++ (MT47H128M16RT25E_PHY_WRLVL<<0)), ++ .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) | ++ (MT47H128M16RT25E_PHY_GATELVL<<20) | ++ (MT47H128M16RT25E_PHY_GATELVL<<10) | ++ (MT47H128M16RT25E_PHY_GATELVL<<0)), ++ .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) | ++ (MT47H128M16RT25E_PHY_FIFO_WE<<20) | ++ (MT47H128M16RT25E_PHY_FIFO_WE<<10) | ++ (MT47H128M16RT25E_PHY_FIFO_WE<<0)), ++ .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) | ++ (MT47H128M16RT25E_PHY_WR_DATA<<20) | ++ (MT47H128M16RT25E_PHY_WR_DATA<<10) | ++ (MT47H128M16RT25E_PHY_WR_DATA<<0)), ++}; ++ ++static const struct cmd_control ddr2_chilisom_gcs1_cmd_ctrl_data = { ++ .cmd0csratio = MT47H128M16RT25E_RATIO, ++ .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT, ++ ++ .cmd1csratio = MT47H128M16RT25E_RATIO, ++ .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT, ++ ++ .cmd2csratio = MT47H128M16RT25E_RATIO, ++ .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT, ++}; ++ ++static const struct emif_regs ddr2_chilisom_gcs1_emif_reg_data = { ++ .sdram_config = MT47H128M16RT25E_EMIF_SDCFG, ++ .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF, ++ .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1, ++ .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2, ++ .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3, ++ .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY, ++}; ++ ++static const struct ddr_data ddr3_chilisom_gcs2_data = { ++ .datardsratio0 = MT41K256M16HA125E_RD_DQS, ++ .datawdsratio0 = MT41K256M16HA125E_WR_DQS, ++ .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, ++ .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, ++}; ++ ++static const struct cmd_control ddr3_chilisom_gcs2_cmd_ctrl_data = { ++ .cmd0csratio = MT41K256M16HA125E_RATIO, ++ .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, ++ ++ .cmd1csratio = MT41K256M16HA125E_RATIO, ++ .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, ++ ++ .cmd2csratio = MT41K256M16HA125E_RATIO, ++ .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, ++}; ++ ++static struct emif_regs ddr3_chilisom_gcs2_emif_reg_data = { ++ .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, ++ .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, ++ .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, ++ .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, ++ .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, ++ .zq_config = MT41K256M16HA125E_ZQ_CFG, ++ .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY, ++}; ++ ++#ifdef CONFIG_SPL_OS_BOOT ++int spl_start_uboot(void) ++{ ++ /* break into full u-boot on 'c' */ ++ if (serial_tstc() && serial_getc() == 'c') ++ return 1; ++ ++#ifdef CONFIG_SPL_ENV_SUPPORT ++ env_init(); ++ env_relocate_spec(); ++ if (getenv_yesno("boot_os") != 1) ++ return 1; ++#endif ++ ++ return 0; ++} ++#endif ++ ++#define OSC (V_OSCK/1000000) ++const struct dpll_params dpll_ddr_chilisom_gcs1 = { ++ 266, OSC-1, 1, -1, -1, -1, -1}; ++const struct dpll_params dpll_ddr_chilisom_gcs2 = { ++ 400, OSC-1, 1, -1, -1, -1, -1}; ++ ++void am33xx_spl_board_init(void) ++{ ++ int mpu_vdd; ++ ++ dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); ++ ++ int usb_cur_lim; ++ ++ if (i2c_probe(TPS65217_CHIP_PM)) ++ return; ++ ++ uchar pmic_status_reg; ++ if (tps65217_reg_read(TPS65217_STATUS, &pmic_status_reg)) ++ return; ++ if (!(pmic_status_reg & TPS65217_PWR_SRC_AC_BITMASK)) { ++ puts("No AC power, disabling frequency switch\n"); ++ return; ++ } ++ ++ /* ++ * Increase USB current limit to 1300mA or 1800mA and set ++ * the MPU voltage controller as needed. ++ */ ++ if (dpll_mpu_opp100.m == MPUPLL_M_1000) { ++ usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA; ++ mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV; ++ } else { ++ usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA; ++ mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV; ++ } ++ ++ if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, ++ TPS65217_POWER_PATH, ++ usb_cur_lim, ++ TPS65217_USB_INPUT_CUR_LIMIT_MASK)) ++ puts("tps65217_reg_write failure\n"); ++ ++ /* Set DCDC3 (CORE) voltage to 1.125V */ ++ if (tps65217_voltage_update(TPS65217_DEFDCDC3, ++ TPS65217_DCDC_VOLT_SEL_1125MV)) { ++ puts("tps65217_voltage_update failure\n"); ++ return; ++ } ++ ++ do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); ++ if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) { ++ puts("tps65217_voltage_update failure\n"); ++ return; ++ } ++ ++ /* Set LDO3, LDO4 output voltage to 3.3V for GCS1. ++ * Set LDO3 to 1.8V and LDO4 to 3.3V for GCS2. */ ++ ++ #ifdef CONFIG_CHILISOM_GCS2 ++ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, ++ TPS65217_DEFLS1, ++ TPS65217_LDO_VOLTAGE_OUT_1_8, ++ TPS65217_LDO_MASK)) ++ puts("tps65217_reg_write failure\n"); ++ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, ++ TPS65217_DEFLS2, ++ TPS65217_LDO_VOLTAGE_OUT_3_3, ++ TPS65217_LDO_MASK)) ++ puts("tps65217_reg_write failure\n"); ++ #else ++ ++ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, ++ TPS65217_DEFLS1, ++ TPS65217_LDO_VOLTAGE_OUT_3_3, ++ TPS65217_LDO_MASK)) ++ puts("tps65217_reg_write failure\n"); ++ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, ++ TPS65217_DEFLS2, ++ TPS65217_LDO_VOLTAGE_OUT_3_3, ++ TPS65217_LDO_MASK)) ++ puts("tps65217_reg_write failure\n"); ++ #endif ++ ++ do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); ++} ++ ++const struct dpll_params *get_dpll_ddr_params(void) ++{ ++ enable_i2c0_pin_mux(); ++ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); ++ ++#ifndef CONFIG_CHILISOM_GCS2 ++ return &dpll_ddr_chilisom_gcs1; ++#else ++ return &dpll_ddr_chilisom_gcs2; ++#endif ++} ++ ++void set_uart_mux_conf(void) ++{ ++#ifdef CONFIG_SERIAL1 ++ enable_uart0_pin_mux(); ++#endif /* CONFIG_SERIAL1 */ ++} ++ ++void set_mux_conf_regs(void) ++{ ++ enable_board_pin_mux(); ++} ++ ++const struct ctrl_ioregs ioregs_chilisom_gcs1 = { ++ .cm0ioctl = MT47H128M16RT25E_IOCTRL_VALUE, ++ .cm1ioctl = MT47H128M16RT25E_IOCTRL_VALUE, ++ .cm2ioctl = MT47H128M16RT25E_IOCTRL_VALUE, ++ .dt0ioctl = MT47H128M16RT25E_IOCTRL_VALUE, ++ .dt1ioctl = MT47H128M16RT25E_IOCTRL_VALUE, ++}; ++ ++const struct ctrl_ioregs ioregs_chilisom_gcs2 = { ++ .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, ++ .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, ++ .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE, ++ .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, ++ .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, ++}; ++ ++void sdram_init(void) ++{ ++#ifndef CONFIG_CHILISOM_GCS2 ++ config_ddr(266, &ioregs_chilisom_gcs1, ++ &ddr2_chilisom_gcs1_data, ++ &ddr2_chilisom_gcs1_cmd_ctrl_data, ++ &ddr2_chilisom_gcs1_emif_reg_data, 0); ++#else ++ config_ddr(400, &ioregs_chilisom_gcs2, ++ &ddr3_chilisom_gcs2_data, ++ &ddr3_chilisom_gcs2_cmd_ctrl_data, ++ &ddr3_chilisom_gcs2_emif_reg_data, 0); ++#endif ++} ++#endif ++ ++/* ++ * Basic board specific setup. Pinmux has been handled already. ++ */ ++int board_init(void) ++{ ++#if defined(CONFIG_HW_WATCHDOG) ++ hw_watchdog_init(); ++#endif ++ ++ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; ++#if defined(CONFIG_NOR) || defined(CONFIG_NAND) ++ gpmc_init(); ++#endif ++ return 0; ++} ++ ++#ifdef CONFIG_BOARD_LATE_INIT ++int board_late_init(void) ++{ ++#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG ++ char safe_string[HDR_NAME_LEN + 1]; ++ ++ /* Now set variables based on the header. */ ++ strncpy(safe_string, (char *)"CHILISOM", 8); ++ safe_string[8] = 0; ++ setenv("board_name", safe_string); ++ ++#ifndef CONFIG_CHILISOM_GCS2 ++ strncpy(safe_string, (char *)"1.1", 3); ++ safe_string[3] = 0; ++ setenv("board_rev", safe_string); ++#else ++ strncpy(safe_string, (char *)"2.2", 3); ++ safe_string[3] = 0; ++ setenv("board_rev", safe_string); ++#endif ++#endif ++ return 0; ++} ++#endif ++ ++#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ ++ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) ++static void cpsw_control(int enabled) ++{ ++ /* VTP can be added here */ ++ ++ return; ++} ++ ++static struct cpsw_slave_data cpsw_slaves[] = { ++ { ++ .slave_reg_ofs = 0x208, ++ .sliver_reg_ofs = 0xd80, ++ .phy_addr = 0, ++ }, ++ { ++ .slave_reg_ofs = 0x308, ++ .sliver_reg_ofs = 0xdc0, ++ .phy_addr = 1, ++ }, ++}; ++ ++static struct cpsw_platform_data cpsw_data = { ++ .mdio_base = CPSW_MDIO_BASE, ++ .cpsw_base = CPSW_BASE, ++ .mdio_div = 0xff, ++ .channels = 8, ++ .cpdma_reg_ofs = 0x800, ++ .slaves = 1, ++ .slave_data = cpsw_slaves, ++ .ale_reg_ofs = 0xd00, ++ .ale_entries = 1024, ++ .host_port_reg_ofs = 0x108, ++ .hw_stats_reg_ofs = 0x900, ++ .bd_ram_ofs = 0x2000, ++ .mac_control = (1 << 5), ++ .control = cpsw_control, ++ .host_port_num = 0, ++ .version = CPSW_CTRL_VERSION_2, ++}; ++#endif ++ ++/* ++ * This function will: ++ * Read the eFuse for MAC addresses, and set ethaddr/eth1addr/usbnet_devaddr ++ * in the environment ++ * Perform fixups to the PHY present on certain boards. We only need this ++ * function in: ++ * - SPL with either CPSW or USB ethernet support ++ * - Full U-Boot, with either CPSW or USB ethernet ++ * Build in only these cases to avoid warnings about unused variables ++ * when we build an SPL that has neither option but full U-Boot will. ++ */ ++ ++#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT)) \ ++ && defined(CONFIG_SPL_BUILD)) || \ ++ ((defined(CONFIG_DRIVER_TI_CPSW) || \ ++ defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \ ++ !defined(CONFIG_SPL_BUILD)) ++int board_eth_init(bd_t *bis) ++{ ++ int rv, n = 0; ++ uint8_t mac_addr[6]; ++ uint32_t mac_hi, mac_lo; ++ ++ /* try reading mac address from efuse */ ++ mac_lo = readl(&cdev->macid0l); ++ mac_hi = readl(&cdev->macid0h); ++ mac_addr[0] = mac_hi & 0xFF; ++ mac_addr[1] = (mac_hi & 0xFF00) >> 8; ++ mac_addr[2] = (mac_hi & 0xFF0000) >> 16; ++ mac_addr[3] = (mac_hi & 0xFF000000) >> 24; ++ mac_addr[4] = mac_lo & 0xFF; ++ mac_addr[5] = (mac_lo & 0xFF00) >> 8; ++ ++#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ ++ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) ++ if (!getenv("ethaddr")) { ++ printf(" not set. Validating first E-fuse MAC\n"); ++ ++ if (is_valid_ether_addr(mac_addr)) ++ eth_setenv_enetaddr("ethaddr", mac_addr); ++ } ++ ++#ifdef CONFIG_DRIVER_TI_CPSW ++ ++ mac_lo = readl(&cdev->macid1l); ++ mac_hi = readl(&cdev->macid1h); ++ mac_addr[0] = mac_hi & 0xFF; ++ mac_addr[1] = (mac_hi & 0xFF00) >> 8; ++ mac_addr[2] = (mac_hi & 0xFF0000) >> 16; ++ mac_addr[3] = (mac_hi & 0xFF000000) >> 24; ++ mac_addr[4] = mac_lo & 0xFF; ++ mac_addr[5] = (mac_lo & 0xFF00) >> 8; ++ ++ if (!getenv("eth1addr")) { ++ if (is_valid_ether_addr(mac_addr)) ++ eth_setenv_enetaddr("eth1addr", mac_addr); ++ } ++ ++ /* writel(MII_MODE_ENABLE, &cdev->miisel); */ ++ writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel); ++ ++ cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RMII; ++ ++ rv = cpsw_register(&cpsw_data); ++ if (rv < 0) ++ printf("Error %d registering CPSW switch\n", rv); ++ else ++ n += rv; ++#endif ++#endif ++#if defined(CONFIG_USB_ETHER) && \ ++ (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT)) ++ if (is_valid_ether_addr(mac_addr)) ++ eth_setenv_enetaddr("usbnet_devaddr", mac_addr); ++ ++ rv = usb_eth_initialize(bis); ++ if (rv < 0) ++ printf("Error %d registering USB_ETHER\n", rv); ++ else ++ n += rv; ++#endif ++ return n; ++} ++#endif +diff --git a/board/grinn/chiliboard/board.h b/board/grinn/chiliboard/board.h +new file mode 100644 +index 0000000..6753e74 +--- /dev/null ++++ b/board/grinn/chiliboard/board.h +@@ -0,0 +1,20 @@ ++/* ++ * board.h ++ * ++ * Grinn AM335x boards information header ++ * ++ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ ++ * ++ * Copyright (C) 2015, Grinn - http://www.grinn-global.com ++ * Grzegorz Glomb, g.glomb@grinn-global.com ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef _BOARD_H_ ++#define _BOARD_H_ ++ ++void enable_uart0_pin_mux(void); ++void enable_i2c0_pin_mux(void); ++void enable_board_pin_mux(void); ++#endif +diff --git a/board/grinn/chiliboard/mux.c b/board/grinn/chiliboard/mux.c +new file mode 100644 +index 0000000..644f211 +--- /dev/null ++++ b/board/grinn/chiliboard/mux.c +@@ -0,0 +1,99 @@ ++/* ++ * mux.c ++ * ++ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ ++ * ++ * Copyright (C) 2015, Grinn - http://www.grinn-global.com ++ * Grzegorz Glomb, g.glomb@grinn-global.com ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include "board.h" ++ ++static struct module_pin_mux uart0_pin_mux[] = { ++ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ ++ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ ++ {-1}, ++}; ++ ++static struct module_pin_mux mmc0_pin_mux[] = { ++ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ ++ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ ++ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ ++ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ ++ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ ++ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ ++ {-1}, ++}; ++ ++static struct module_pin_mux i2c0_pin_mux[] = { ++ {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | ++ PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ ++ {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | ++ PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ ++ {-1}, ++}; ++ ++static struct module_pin_mux rmii1_pin_mux[] = { ++ {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS */ ++ {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */ ++ {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */ ++ {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */ ++ {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */ ++ {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */ ++ {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */ ++ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ ++ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ ++ {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */ ++ {-1}, ++}; ++ ++static struct module_pin_mux nand_pin_mux[] = { ++ {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ ++ {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ ++ {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ ++ {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ ++ {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ ++ {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ ++ {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ ++ {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ ++ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ ++ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ ++ {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ ++ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ ++ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ ++ {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ ++ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ ++ {-1}, ++}; ++ ++void enable_uart0_pin_mux(void) ++{ ++ configure_module_pin_mux(uart0_pin_mux); ++} ++ ++void enable_i2c0_pin_mux(void) ++{ ++ configure_module_pin_mux(i2c0_pin_mux); ++} ++ ++void enable_board_pin_mux(void) ++{ ++ /* chiliboard pinmux */ ++ configure_module_pin_mux(rmii1_pin_mux); ++ configure_module_pin_mux(nand_pin_mux); ++ configure_module_pin_mux(mmc0_pin_mux); ++ ++#ifndef CONFIG_CHILISOM_GCS2 ++ puts("Configuration for Chilisom GCS1\n"); ++#else ++ puts("Configuration for Chilisom GCS2\n"); ++#endif ++} +diff --git a/board/grinn/chiliboard/u-boot.lds b/board/grinn/chiliboard/u-boot.lds +new file mode 100644 +index 0000000..bf70d88 +--- /dev/null ++++ b/board/grinn/chiliboard/u-boot.lds +@@ -0,0 +1,131 @@ ++/* ++ * Copyright (c) 2004-2008 Texas Instruments ++ * ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, ++ * ++ * Copyright (C) 2015, Grinn - http://www.grinn-global.com ++ * Grzegorz Glomb, g.glomb@grinn-global.com ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ *(.__image_copy_start) ++ *(.vectors) ++ CPUDIR/start.o (.text*) ++ board/grinn/chiliboard/built-in.o (.text*) ++ *(.text*) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } ++ ++ . = ALIGN(4); ++ .data : { ++ *(.data*) ++ } ++ ++ . = ALIGN(4); ++ ++ . = .; ++ ++ . = ALIGN(4); ++ .u_boot_list : { ++ KEEP(*(SORT(.u_boot_list*))); ++ } ++ ++ . = ALIGN(4); ++ ++ .image_copy_end : ++ { ++ *(.__image_copy_end) ++ } ++ ++ .rel_dyn_start : ++ { ++ *(.__rel_dyn_start) ++ } ++ ++ .rel.dyn : { ++ *(.rel*) ++ } ++ ++ .rel_dyn_end : ++ { ++ *(.__rel_dyn_end) ++ } ++ ++ .hash : { *(.hash*) } ++ ++ .end : ++ { ++ *(.__end) ++ } ++ ++ _image_binary_end = .; ++ ++ /* ++ * Deprecated: this MMU section is used by pxa at present but ++ * should not be used by new boards/CPUs. ++ */ ++ . = ALIGN(4096); ++ .mmutable : { ++ *(.mmutable) ++ } ++ ++/* ++ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c ++ * __bss_base and __bss_limit are for linker only (overlay ordering) ++ */ ++ ++ .bss_start __rel_dyn_start (OVERLAY) : { ++ KEEP(*(.__bss_start)); ++ __bss_base = .; ++ } ++ ++ .bss __bss_base (OVERLAY) : { ++ *(.bss*) ++ . = ALIGN(4); ++ __bss_limit = .; ++ } ++ ++ .bss_end __bss_limit (OVERLAY) : { ++ KEEP(*(.__bss_end)); ++ } ++ ++ .dynsym _image_binary_end : { *(.dynsym) } ++ .dynbss : { *(.dynbss) } ++ .dynstr : { *(.dynstr*) } ++ .dynamic : { *(.dynamic*) } ++ .gnu.hash : { *(.gnu.hash) } ++ .plt : { *(.plt*) } ++ .interp : { *(.interp*) } ++ .gnu : { *(.gnu*) } ++ .ARM.exidx : { *(.ARM.exidx*) } ++} +diff --git a/boards.cfg b/boards.cfg +index 1ba2081..b432704 100644 +--- a/boards.cfg ++++ b/boards.cfg +@@ -258,6 +258,11 @@ Active arm armv7 am33xx BuR tseries + Active arm armv7 am33xx BuR tseries tseries_nand tseries:SERIAL1,CONS_INDEX=1,NAND Hannes Petermaier + Active arm armv7 am33xx BuR tseries tseries_spi tseries:SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT Hannes Petermaier + Active arm armv7 am33xx compulab cm_t335 cm_t335 - Igor Grinberg ++Active arm armv7 am33xx grinn chiliboard chiliboard_ram128m chiliboard:CHILISOM_GCS2,NAND,RAM128MB Grzegorz Glomb ++Active arm armv7 am33xx grinn chiliboard chiliboard_nand0m_ram128m chiliboard:CHILISOM_GCS2,RAM128MB Grzegorz Glomb ++Active arm armv7 am33xx grinn chiliboard chiliboard_nand512m chiliboard:CHILISOM_GCS2,NAND,NAND512MB Grzegorz Glomb ++Active arm armv7 am33xx grinn chiliboard chiliboard_nand0m chiliboard:CHILISOM_GCS2 Grzegorz Glomb ++Active arm armv7 am33xx grinn chiliboard chiliboard chiliboard:CHILISOM_GCS2,NAND Grzegorz Glomb + Active arm armv7 am33xx gumstix pepper pepper - Ash Charles + Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra + Active arm armv7 am33xx phytec pcm051 pcm051_rev1 pcm051:REV1 Lars Poeschel +diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c +index 1acf06b..0c9cde3 100644 +--- a/drivers/mtd/nand/omap_gpmc.c ++++ b/drivers/mtd/nand/omap_gpmc.c +@@ -478,11 +478,13 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, + oob += eccbytes) { + chip->ecc.hwctl(mtd, NAND_ECC_READ); + /* read data */ +- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page); ++ /* chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page); */ ++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, -1); + chip->read_buf(mtd, p, eccsize); + + /* read respective ecc from oob area */ +- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page); ++ /* chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page); */ ++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1); + chip->read_buf(mtd, oob, eccbytes); + /* read syndrome */ + chip->ecc.calculate(mtd, p, &ecc_calc[i]); +diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h +new file mode 100644 +index 0000000..eacc9af +--- /dev/null ++++ b/include/configs/chiliboard.h +@@ -0,0 +1,878 @@ ++/* ++ * chiliboard.h ++ * ++ * Grinn chiliboard configuration header ++ * ++ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ ++ * ++ * Copyright (C) 2015, Grinn - http://www.grinn-global.com ++ * Grzegorz Glomb, g.glomb@grinn-global.com ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __CONFIG_CHILIBOARD_H ++#define __CONFIG_CHILIBOARD_H ++ ++#define CONFIG_AM33XX ++#define CONFIG_ARCH_CPU_INIT ++#define CONFIG_SYS_CACHELINE_SIZE 64 ++#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ ++#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ ++#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC ++ ++#include ++ ++/* NS16550 Configuration */ ++#define CONFIG_SYS_NS16550 ++#define CONFIG_SYS_NS16550_SERIAL ++#define CONFIG_SYS_NS16550_REG_SIZE (-4) ++#define CONFIG_SYS_NS16550_CLK 48000000 ++ ++/* Network defines. */ ++#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ ++#define CONFIG_CMD_DHCP ++#define CONFIG_CMD_MII ++#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ ++#define CONFIG_BOOTP_DNS2 ++#define CONFIG_BOOTP_SEND_HOSTNAME ++#define CONFIG_BOOTP_GATEWAY ++#define CONFIG_BOOTP_SUBNETMASK ++#define CONFIG_NET_RETRY_COUNT 10 ++#define CONFIG_CMD_PING ++#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ ++#define CONFIG_MII /* Required in net/eth.c */ ++ ++/* ++ * RTC related defines. To use bootcount you must set bootlimit in the ++ * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT ++ * in the board config. ++ */ ++#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 ++ ++/* Enable the HW watchdog, since we can use this with bootcount */ ++#define CONFIG_HW_WATCHDOG ++#define CONFIG_OMAP_WATCHDOG ++ ++/* ++ * SPL related defines. The Public RAM memory map the ROM defines the ++ * area between 0x402F0400 and 0x4030B800 as a download area and ++ * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also ++ * supports X-MODEM loading via UART, and we leverage this and then use ++ * Y-MODEM to load u-boot.img, when booted over UART. ++ */ ++#define CONFIG_SPL_TEXT_BASE 0x402F0400 ++#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE) ++#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ ++ (128 << 20)) ++ ++/* Enable the watchdog inside of SPL */ ++#define CONFIG_SPL_WATCHDOG_SUPPORT ++ ++/* ++ * Since SPL did pll and ddr initialization for us, ++ * we don't need to do it twice. ++ */ ++#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT) ++#define CONFIG_SKIP_LOWLEVEL_INIT ++#endif ++ ++/* ++ * When building U-Boot such that there is no previous loader ++ * we need to call board_early_init_f. This is taken care of in ++ * s_init when we have SPL used. ++ */ ++#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL) ++#define CONFIG_BOARD_EARLY_INIT_F ++#endif ++ ++#ifdef CONFIG_NAND ++#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ ++#endif ++ ++/* Common define for many platforms. */ ++#define CONFIG_OMAP ++#define CONFIG_OMAP_COMMON ++#define CONFIG_SYS_GENERIC_BOARD ++ ++/* ++ * We typically do not contain NOR flash. In the cases where we do, we ++ * undefine this later. ++ */ ++#define CONFIG_SYS_NO_FLASH ++ ++/* Support both device trees and ATAGs. */ ++#define CONFIG_OF_LIBFDT ++#define CONFIG_CMDLINE_TAG ++#define CONFIG_SETUP_MEMORY_TAGS ++#define CONFIG_INITRD_TAG ++ ++/* ++ * Our DDR memory always starts at 0x80000000 and U-Boot shall have ++ * relocated itself to higher in memory by the time this value is used. ++ * However, set this to a 32MB offset to allow for easier Linux kernel ++ * booting as the default is often used as the kernel load address. ++ */ ++#define CONFIG_SYS_LOAD_ADDR 0x82000000 ++ ++/* ++ * We setup defaults based on constraints from the Linux kernel, which should ++ * also be safe elsewhere. We have the default load at 32MB into DDR (for ++ * the kernel), FDT above 128MB (the maximum location for the end of the ++ * kernel), and the ramdisk 512KB above that (allowing for hopefully never ++ * seen large trees). We say all of this must be within the first 256MB ++ * as that will normally be within the kernel lowmem and thus visible via ++ * bootm_size and we only run on platforms with 256MB or more of memory. ++ */ ++#ifdef CONFIG_RAM128MB ++#define DEFAULT_LINUX_BOOT_ENV \ ++ "loadaddr=0x82000000\0" \ ++ "kernel_addr_r=0x82000000\0" \ ++ "fdtaddr=0x84000000\0" \ ++ "fdt_addr_r=0x84000000\0" \ ++ "rdaddr=0x84080000\0" \ ++ "ramdisk_addr_r=0x84080000\0" \ ++ "bootm_size=0x8000000\0" ++#else ++#define DEFAULT_LINUX_BOOT_ENV \ ++ "loadaddr=0x82000000\0" \ ++ "kernel_addr_r=0x82000000\0" \ ++ "fdtaddr=0x88000000\0" \ ++ "fdt_addr_r=0x88000000\0" \ ++ "rdaddr=0x88080000\0" \ ++ "ramdisk_addr_r=0x88080000\0" \ ++ "bootm_size=0x10000000\0" ++#endif ++ ++/* ++ * Default to a quick boot delay. ++ */ ++#define CONFIG_BOOTDELAY 1 ++ ++/* ++ * DDR information. If the CONFIG_NR_DRAM_BANKS is not defined, ++ * we say (for simplicity) that we have 1 bank, always, even when ++ * we have more. We always start at 0x80000000, and we place the ++ * initial stack pointer in our SRAM. Otherwise, we can define ++ * CONFIG_NR_DRAM_BANKS before including this file. ++ */ ++#ifndef CONFIG_NR_DRAM_BANKS ++#define CONFIG_NR_DRAM_BANKS 1 ++#endif ++#define CONFIG_SYS_SDRAM_BASE 0x80000000 ++#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ ++ GENERATED_GBL_DATA_SIZE) ++ ++/* Timer information. */ ++#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ ++ ++/* I2C IP block */ ++#define CONFIG_I2C ++#define CONFIG_CMD_I2C ++#define CONFIG_SYS_I2C ++#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 ++#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 ++#define CONFIG_SYS_I2C_OMAP24XX ++ ++/* MMC/SD IP block */ ++#define CONFIG_MMC ++#define CONFIG_GENERIC_MMC ++#define CONFIG_OMAP_HSMMC ++#define CONFIG_CMD_MMC ++ ++/* McSPI IP block */ ++#define CONFIG_SPI ++#define CONFIG_OMAP3_SPI ++#define CONFIG_CMD_SPI ++ ++/* GPIO block */ ++#define CONFIG_OMAP_GPIO ++#define CONFIG_CMD_GPIO ++ ++/* ++ * GPMC NAND block. We support 1 device and the physical address to ++ * access CS0 at is 0x8000000. ++ */ ++#ifdef CONFIG_NAND ++#define CONFIG_NAND_OMAP_GPMC ++#ifndef CONFIG_SYS_NAND_BASE ++#define CONFIG_SYS_NAND_BASE 0x8000000 ++#endif ++#define CONFIG_SYS_MAX_NAND_DEVICE 1 ++#define CONFIG_CMD_NAND ++#endif ++ ++/* ++ * The following are general good-enough settings for U-Boot. We set a ++ * large malloc pool as we generally have a lot of DDR, and we opt for ++ * function over binary size in the main portion of U-Boot as this is ++ * generally easily constrained later if needed. We enable the config ++ * options that give us information in the environment about what board ++ * we are on so we do not need to rely on the command prompt. We set a ++ * console baudrate of 115200 and use the default baud rate table. ++ */ ++#define CONFIG_SYS_MALLOC_LEN (16 << 20) ++#define CONFIG_SYS_HUSH_PARSER ++#define CONFIG_SYS_PROMPT "U-Boot# " ++#define CONFIG_SYS_CONSOLE_INFO_QUIET ++#define CONFIG_BAUDRATE 115200 ++#define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */ ++#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */ ++ ++/* As stated above, the following choices are optional. */ ++#define CONFIG_SYS_LONGHELP ++#define CONFIG_AUTO_COMPLETE ++#define CONFIG_CMDLINE_EDITING ++#define CONFIG_VERSION_VARIABLE ++ ++/* We set the max number of command args high to avoid HUSH bugs. */ ++#define CONFIG_SYS_MAXARGS 64 ++ ++/* Console I/O Buffer Size */ ++#define CONFIG_SYS_CBSIZE 512 ++/* Print Buffer Size */ ++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ ++ + sizeof(CONFIG_SYS_PROMPT) + 16) ++/* Boot Argument Buffer Size */ ++#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE ++ ++/* ++ * When we have SPI, NOR or NAND flash we expect to be making use of ++ * mtdparts, both for ease of use in U-Boot and for passing information ++ * on to the Linux kernel. ++ */ ++#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND) ++#define CONFIG_MTD_DEVICE /* Required for mtdparts */ ++#define CONFIG_CMD_MTDPARTS ++#endif ++ ++/* ++ * For commands to use, we take the default list and add a few other ++ * useful commands. Note that we must have set CONFIG_SYS_NO_FLASH ++ * prior to this include, in order to skip a few commands. When we do ++ * have flash, if we expect these commands they must be enabled in that ++ * config. If desired, a specific list of desired commands can be used ++ * instead. ++ */ ++#include ++#define CONFIG_CMD_ASKENV ++#define CONFIG_CMD_ECHO ++#define CONFIG_CMD_BOOTZ ++ ++/* ++ * Common filesystems support. When we have removable storage we ++ * enabled a number of useful commands and support. ++ */ ++#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE) ++#define CONFIG_DOS_PARTITION ++#define CONFIG_CMD_FAT ++#define CONFIG_FAT_WRITE ++#define CONFIG_CMD_EXT2 ++#define CONFIG_CMD_EXT4 ++#define CONFIG_CMD_FS_GENERIC ++#endif ++ ++/* ++ * Our platforms make use of SPL to initalize the hardware (primarily ++ * memory) enough for full U-Boot to be loaded. We also support Falcon ++ * Mode so that the Linux kernel can be booted directly from SPL ++ * instead, if desired. We make use of the general SPL framework found ++ * under common/spl/. Given our generally common memory map, we set a ++ * number of related defaults and sizes here. ++ */ ++#if !defined(CONFIG_NOR_BOOT) && \ ++ !(defined(CONFIG_QSPI_BOOT) && defined(CONFIG_AM43XX)) ++#define CONFIG_SPL ++#define CONFIG_SPL_FRAMEWORK ++#define CONFIG_SPL_OS_BOOT ++ ++/* ++ * Place the image at the start of the ROM defined image space. ++ * We limit our size to the ROM-defined downloaded image area, and use the ++ * rest of the space for stack. We load U-Boot itself into memory at ++ * 0x80800000 for legacy reasons (to not conflict with older SPLs). We ++ * have our BSS be placed 1MiB after this, to allow for the default ++ * Linux kernel address of 0x80008000 to work, in the Falcon Mode case. ++ * We have the SPL malloc pool at the end of the BSS area. ++ */ ++#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR ++#ifndef CONFIG_SYS_TEXT_BASE ++#define CONFIG_SYS_TEXT_BASE 0x80800000 ++#endif ++#ifndef CONFIG_SPL_BSS_START_ADDR ++#define CONFIG_SPL_BSS_START_ADDR 0x80a00000 ++#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ ++#endif ++#ifndef CONFIG_SYS_SPL_MALLOC_START ++#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ ++ CONFIG_SPL_BSS_MAX_SIZE) ++#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN ++#endif ++ ++/* RAW SD card / eMMC locations. */ ++#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ ++#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ ++ ++/* FAT sd card locations. */ ++#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 ++#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" ++ ++#ifdef CONFIG_SPL_OS_BOOT ++/* FAT */ ++#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage" ++#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args" ++ ++/* RAW SD card / eMMC */ ++#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */ ++#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ ++#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ ++ ++/* NAND */ ++#ifdef CONFIG_NAND ++#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */ ++#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 ++#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 ++#endif ++ ++/* spl export command */ ++#define CONFIG_CMD_SPL ++#endif ++ ++#ifdef CONFIG_MMC ++#define CONFIG_SPL_LIBDISK_SUPPORT ++#define CONFIG_SPL_MMC_SUPPORT ++#define CONFIG_SPL_FAT_SUPPORT ++#endif ++ ++/* General parts of the framework, required. */ ++#define CONFIG_SPL_I2C_SUPPORT ++#define CONFIG_SPL_LIBCOMMON_SUPPORT ++#define CONFIG_SPL_LIBGENERIC_SUPPORT ++#define CONFIG_SPL_SERIAL_SUPPORT ++#define CONFIG_SPL_GPIO_SUPPORT ++#define CONFIG_SPL_BOARD_INIT ++ ++#ifdef CONFIG_NAND ++#define CONFIG_SPL_NAND_SUPPORT ++#define CONFIG_SPL_NAND_BASE ++#define CONFIG_SPL_NAND_DRIVERS ++#define CONFIG_SPL_NAND_ECC ++#define CONFIG_SPL_MTD_SUPPORT ++#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE ++/* #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 */ /* Defined later in this configuration */ ++#endif ++#endif /* !CONFIG_NOR_BOOT */ ++ ++#ifndef CONFIG_SPL_BUILD ++# define CONFIG_FIT ++# define CONFIG_TIMESTAMP ++# define CONFIG_LZO ++# ifdef CONFIG_ENABLE_VBOOT ++# define CONFIG_OF_CONTROL ++# define CONFIG_OF_SEPARATE ++# define CONFIG_DEFAULT_DEVICE_TREE am335x-chiliboard ++# define CONFIG_FIT_SIGNATURE ++# define CONFIG_RSA ++# endif ++#endif ++ ++#define CONFIG_SYS_BOOTM_LEN (16 << 20) ++ ++#define CONFIG_BOARD_LATE_INIT ++ ++#define CONFIG_SERIAL1 1 ++#define CONFIG_CONS_INDEX 1 ++ ++/* Clock Defines */ ++#define V_OSCK 24000000 /* Clock output from T2 */ ++#define V_SCLK (V_OSCK) ++ ++/* Custom script for NOR */ ++#define CONFIG_SYS_LDSCRIPT "board/grinn/chiliboard/u-boot.lds" ++ ++/* Always 128 KiB env size */ ++#define CONFIG_ENV_SIZE (128 << 10) ++ ++/* Enhance our eMMC support / experience. */ ++#define CONFIG_CMD_GPT ++#define CONFIG_EFI_PARTITION ++#define CONFIG_PARTITION_UUIDS ++#define CONFIG_CMD_PART ++ ++#ifdef CONFIG_NAND ++#ifndef CONFIG_NAND512MB ++#define NANDARGS \ ++ "mtdids=" MTDIDS_DEFAULT "\0" \ ++ "mtdparts=" MTDPARTS_DEFAULT "\0" \ ++ "nandargs=setenv bootargs console=${console} " \ ++ "${optargs} " \ ++ "root=${nandroot} " \ ++ "rootfstype=${nandrootfstype}\0" \ ++ "nandroot=ubi0:rootfs rw ubi.mtd=8,2048\0" \ ++ "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandboot=echo Booting from nand ...; " \ ++ "run nandargs; " \ ++ "nand read ${fdtaddr} u-boot-spl-os; " \ ++ "nand read ${loadaddr} kernel; " \ ++ "bootz ${loadaddr} - ${fdtaddr}\0" ++#else ++#define NANDARGS \ ++ "mtdids=" MTDIDS_DEFAULT "\0" \ ++ "mtdparts=" MTDPARTS_DEFAULT "\0" \ ++ "nandargs=setenv bootargs console=${console} " \ ++ "${optargs} " \ ++ "root=${nandroot} " \ ++ "rootfstype=${nandrootfstype}\0" \ ++ "nandroot=ubi0:rootfs rw ubi.mtd=8,4096\0" \ ++ "nandrootfstype=ubifs rootwait=1\0" \ ++ "nandboot=echo Booting from nand ...; " \ ++ "run nandargs; " \ ++ "nand read ${fdtaddr} u-boot-spl-os; " \ ++ "nand read ${loadaddr} kernel; " \ ++ "bootz ${loadaddr} - ${fdtaddr}\0" ++#endif ++#else ++#define NANDARGS "" ++#endif ++ ++#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG ++ ++#ifndef CONFIG_SPL_BUILD ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ DEFAULT_LINUX_BOOT_ENV \ ++ "boot_fdt=try\0" \ ++ "bootpart=0:2\0" \ ++ "bootdir=/boot\0" \ ++ "bootfile=zImage\0" \ ++ "fdtfile=undefined\0" \ ++ "console=ttyO0,115200n8\0" \ ++ "partitions=" \ ++ "uuid_disk=${uuid_gpt_disk};" \ ++ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ ++ "optargs=\0" \ ++ "mmcdev=0\0" \ ++ "mmcroot=/dev/mmcblk0p2 rw\0" \ ++ "mmcrootfstype=ext4 rootwait\0" \ ++ "rootpath=/export/rootfs\0" \ ++ "nfsopts=nolock\0" \ ++ "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ ++ "::off\0" \ ++ "ramroot=/dev/ram0 rw\0" \ ++ "ramrootfstype=ext2\0" \ ++ "mmcargs=setenv bootargs console=${console} " \ ++ "${optargs} " \ ++ "root=${mmcroot} " \ ++ "rootfstype=${mmcrootfstype}\0" \ ++ "spiroot=/dev/mtdblock4 rw\0" \ ++ "spirootfstype=jffs2\0" \ ++ "spisrcaddr=0xe0000\0" \ ++ "spiimgsize=0x362000\0" \ ++ "spibusno=0\0" \ ++ "spiargs=setenv bootargs console=${console} " \ ++ "${optargs} " \ ++ "root=${spiroot} " \ ++ "rootfstype=${spirootfstype}\0" \ ++ "netargs=setenv bootargs console=${console} " \ ++ "${optargs} " \ ++ "root=/dev/nfs " \ ++ "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ ++ "ip=dhcp\0" \ ++ "bootenv=uEnv.txt\0" \ ++ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ ++ "importbootenv=echo Importing environment from mmc ...; " \ ++ "env import -t $loadaddr $filesize\0" \ ++ "ramargs=setenv bootargs console=${console} " \ ++ "${optargs} " \ ++ "root=${ramroot} " \ ++ "rootfstype=${ramrootfstype}\0" \ ++ "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ ++ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ ++ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ ++ "mmcloados=run mmcargs; " \ ++ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ ++ "if run loadfdt; then " \ ++ "bootz ${loadaddr} - ${fdtaddr}; " \ ++ "else " \ ++ "if test ${boot_fdt} = try; then " \ ++ "bootz; " \ ++ "else " \ ++ "echo WARN: Cannot load the DT; " \ ++ "fi; " \ ++ "fi; " \ ++ "else " \ ++ "bootz; " \ ++ "fi;\0" \ ++ "mmcboot=mmc dev ${mmcdev}; " \ ++ "if mmc rescan; then " \ ++ "echo SD/MMC found on device ${mmcdev};" \ ++ "if run loadbootenv; then " \ ++ "echo Loaded environment from ${bootenv};" \ ++ "run importbootenv;" \ ++ "fi;" \ ++ "if test -n $uenvcmd; then " \ ++ "echo Running uenvcmd ...;" \ ++ "run uenvcmd;" \ ++ "fi;" \ ++ "if run loadimage; then " \ ++ "run mmcloados;" \ ++ "fi;" \ ++ "fi;\0" \ ++ "spiboot=echo Booting from spi ...; " \ ++ "run spiargs; " \ ++ "sf probe ${spibusno}:0; " \ ++ "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \ ++ "bootz ${loadaddr}\0" \ ++ "netboot=echo Booting from network ...; " \ ++ "setenv autoload no; " \ ++ "dhcp; " \ ++ "tftp ${loadaddr} ${bootfile}; " \ ++ "tftp ${fdtaddr} ${fdtfile}; " \ ++ "run netargs; " \ ++ "bootz ${loadaddr} - ${fdtaddr}\0" \ ++ "ramboot=echo Booting from ramdisk ...; " \ ++ "run ramargs; " \ ++ "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ ++ "findfdt="\ ++ "setenv fdtfile am335x-chiliboard.dtb;\0" \ ++ NANDARGS \ ++ DFUARGS ++#endif ++ ++#define CONFIG_BOOTCOMMAND \ ++ "run findfdt; " \ ++ "run mmcboot;" \ ++ "setenv mmcdev 1; " \ ++ "setenv bootpart 1:2; " \ ++ "run mmcboot;" \ ++ "run nandboot;" ++ ++/* NS16550 Configuration */ ++#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ ++#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ ++#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ ++#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ ++#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ ++#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ ++#define CONFIG_BAUDRATE 115200 ++ ++/* ++#define CONFIG_CMD_EEPROM ++#define CONFIG_ENV_EEPROM_IS_ON_I2C ++#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 ++#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 ++#define CONFIG_SYS_I2C_MULTI_EEPROMS ++*/ ++ ++/* PMIC support */ ++#define CONFIG_POWER_TPS65217 ++/* #define CONFIG_POWER_TPS65910 */ ++ ++/* SPL */ ++#ifndef CONFIG_NOR_BOOT ++#define CONFIG_SPL_POWER_SUPPORT ++#define CONFIG_SPL_YMODEM_SUPPORT ++ ++/* Bootcount using the RTC block */ ++#define CONFIG_BOOTCOUNT_LIMIT ++#define CONFIG_BOOTCOUNT_AM33XX ++ ++/* USB gadget RNDIS */ ++#define CONFIG_SPL_MUSB_NEW_SUPPORT ++ ++/* General network SPL, both CPSW and USB gadget RNDIS */ ++#define CONFIG_SPL_NET_SUPPORT ++#define CONFIG_SPL_ENV_SUPPORT ++#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" ++ ++#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" ++ ++#ifdef CONFIG_NAND ++#define CONFIG_NAND_OMAP_GPMC ++#define CONFIG_NAND_OMAP_ELM ++#define CONFIG_SYS_NAND_5_ADDR_CYCLE ++#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ ++ CONFIG_SYS_NAND_PAGE_SIZE) ++ ++#ifndef CONFIG_NAND512MB ++#define CONFIG_SYS_NAND_PAGE_SIZE 2048 ++#define CONFIG_SYS_NAND_OOBSIZE 64 ++#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) ++#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS ++#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ ++ 10, 11, 12, 13, 14, 15, 16, 17, \ ++ 18, 19, 20, 21, 22, 23, 24, 25, \ ++ 26, 27, 28, 29, 30, 31, 32, 33, \ ++ 34, 35, 36, 37, 38, 39, 40, 41, \ ++ 42, 43, 44, 45, 46, 47, 48, 49, \ ++ 50, 51, 52, 53, 54, 55, 56, 57, } ++ ++#define CONFIG_SYS_NAND_ECCSIZE 512 ++#define CONFIG_SYS_NAND_ECCBYTES 14 ++#define CONFIG_SYS_NAND_ONFI_DETECTION ++#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW ++#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE ++#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 ++#else ++#define CONFIG_SYS_NAND_PAGE_SIZE 4096 ++#define CONFIG_SYS_NAND_OOBSIZE 224 ++#define CONFIG_SYS_NAND_BLOCK_SIZE (256*1024) ++#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS ++#define CONFIG_SYS_NAND_ECCPOS {\ ++ 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\ ++ 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\ ++ 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,\ ++ 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,\ ++ 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,\ ++ 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75,\ ++ 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,\ ++ 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99,\ ++ 100, 101, 102, 103, 104, 105, 106, 107, 108, 109,\ ++ 110, 111, 112, 113, 114, 115, 116, 117, 118, 119,\ ++ 120, 121, 122, 123, 124, 125, 126, 127, 128, 129,\ ++ 130, 131, 132, 133, 134, 135, 136, 137, 138, 139,\ ++ 140, 141, 142, 143, 144, 145, 146, 147, 148, 149,\ ++ 150, 151, 152, 153, 154, 155, 156, 157, 158, 159,\ ++ 160, 161, 162, 163, 164, 165, 166, 167, 168, 169,\ ++ 170, 171, 172, 173, 174, 175, 176, 177, 178, 179,\ ++ 180, 181, 182, 183, 184, 185, 186, 187, 188, 189,\ ++ 190, 191, 192, 193, 194, 195, 196, 197, 198, 199,\ ++ 200, 201, 202, 203, 204, 205, 206, 207, 208, 209} ++ ++#define CONFIG_SYS_NAND_ECCSIZE 512 ++#define CONFIG_SYS_NAND_ECCBYTES 26 ++#define CONFIG_SYS_NAND_ONFI_DETECTION ++#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW ++#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE ++#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x100000 ++#endif ++ ++#endif ++#endif ++ ++/* ++ * For NOR boot, we must set this to the start of where NOR is mapped ++ * in memory. ++ */ ++#ifdef CONFIG_NOR_BOOT ++#define CONFIG_SYS_TEXT_BASE 0x08000000 ++#endif ++ ++/* ++ * USB configuration. We enable MUSB support, both for host and for ++ * gadget. We set USB0 as peripheral and USB1 as host, based on the ++ * board schematic and physical port wired to each. Then for host we ++ * add mass storage support and for gadget we add both RNDIS ethernet ++ * and DFU. ++ */ ++#define CONFIG_USB_MUSB_DSPS ++#define CONFIG_ARCH_MISC_INIT ++#define CONFIG_MUSB_GADGET ++#define CONFIG_MUSB_PIO_ONLY ++#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT ++#define CONFIG_USB_GADGET ++#define CONFIG_USBDOWNLOAD_GADGET ++#define CONFIG_USB_GADGET_DUALSPEED ++#define CONFIG_USB_GADGET_VBUS_DRAW 2 ++#define CONFIG_MUSB_HOST ++#define CONFIG_AM335X_USB0 ++#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL ++#define CONFIG_AM335X_USB1 ++#define CONFIG_AM335X_USB1_MODE MUSB_HOST ++ ++#ifdef CONFIG_MUSB_HOST ++#define CONFIG_CMD_USB ++#define CONFIG_USB_STORAGE ++#endif ++ ++#ifdef CONFIG_MUSB_GADGET ++#define CONFIG_USB_ETHER ++#define CONFIG_USB_ETH_RNDIS ++#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" ++ ++/* USB TI's IDs */ ++#define CONFIG_G_DNL_VENDOR_NUM 0x0403 ++#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 ++#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" ++#endif /* CONFIG_MUSB_GADGET */ ++ ++#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) ++/* disable host part of MUSB in SPL */ ++#undef CONFIG_MUSB_HOST ++/* disable EFI partitions and partition UUID support */ ++#undef CONFIG_PARTITION_UUIDS ++#undef CONFIG_EFI_PARTITION ++/* ++ * Disable CPSW SPL support so we fit within the 101KiB limit. ++ */ ++#undef CONFIG_SPL_ETH_SUPPORT ++#endif ++ ++/* USB Device Firmware Update support */ ++#ifndef CONFIG_SPL_BUILD ++#define CONFIG_DFU_FUNCTION ++#define CONFIG_DFU_MMC ++#define CONFIG_CMD_DFU ++#define DFU_ALT_INFO_MMC \ ++ "dfu_alt_info_mmc=" \ ++ "boot part 0 1;" \ ++ "rootfs part 0 2;" \ ++ "MLO fat 0 1;" \ ++ "MLO.raw mmc 0x100 0x100;" \ ++ "u-boot.img.raw mmc 0x300 0x400;" \ ++ "spl-os-args.raw mmc 0x80 0x80;" \ ++ "spl-os-image.raw mmc 0x900 0x2000;" \ ++ "spl-os-args fat 0 1;" \ ++ "spl-os-image fat 0 1;" \ ++ "u-boot.img fat 0 1;" \ ++ "uEnv.txt fat 0 1\0" ++#ifdef CONFIG_NAND ++#define CONFIG_DFU_NAND ++#define DFU_ALT_INFO_NAND \ ++ "dfu_alt_info_nand=" \ ++ "SPL part 0 1;" \ ++ "SPL.backup1 part 0 2;" \ ++ "SPL.backup2 part 0 3;" \ ++ "SPL.backup3 part 0 4;" \ ++ "u-boot part 0 5;" \ ++ "u-boot-spl-os part 0 6;" \ ++ "kernel part 0 8;" \ ++ "rootfs part 0 9\0" ++#else ++#define DFU_ALT_INFO_NAND "" ++#endif ++#define CONFIG_DFU_RAM ++#define DFU_ALT_INFO_RAM \ ++ "dfu_alt_info_ram=" \ ++ "kernel ram 0x80200000 0xD80000;" \ ++ "fdt ram 0x80F80000 0x80000;" \ ++ "ramdisk ram 0x81000000 0x4000000\0" ++#define DFUARGS \ ++ "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \ ++ DFU_ALT_INFO_MMC \ ++ DFU_ALT_INFO_RAM \ ++ DFU_ALT_INFO_NAND ++#endif ++ ++/* ++ * Default to using SPI for environment, etc. ++ * 0x000000 - 0x020000 : SPL (128KiB) ++ * 0x020000 - 0x0A0000 : U-Boot (512KiB) ++ * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB) ++ * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB) ++ * 0x0E0000 - 0x442000 : Linux Kernel ++ * 0x442000 - 0x800000 : Userland ++ */ ++#if defined(CONFIG_SPI_BOOT) ++/* SPL related */ ++#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */ ++#define CONFIG_SPL_SPI_SUPPORT ++#define CONFIG_SPL_SPI_FLASH_SUPPORT ++#define CONFIG_SPL_SPI_LOAD ++#define CONFIG_SPL_SPI_BUS 0 ++#define CONFIG_SPL_SPI_CS 0 ++#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 ++ ++#define CONFIG_ENV_IS_IN_SPI_FLASH ++#define CONFIG_SYS_REDUNDAND_ENVIRONMENT ++#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED ++#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ ++#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */ ++#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */ ++#define MTDIDS_DEFAULT "nor0=m25p80-flash.0" ++#define MTDPARTS_DEFAULT "mtdparts=m25p80-flash.0:128k(SPL)," \ ++ "512k(u-boot),128k(u-boot-env1)," \ ++ "128k(u-boot-env2),3464k(kernel)," \ ++ "-(rootfs)" ++#elif defined(CONFIG_EMMC_BOOT) ++#undef CONFIG_ENV_IS_NOWHERE ++#define CONFIG_ENV_IS_IN_MMC ++#define CONFIG_SYS_MMC_ENV_DEV 1 ++#define CONFIG_SYS_MMC_ENV_PART 2 ++#define CONFIG_ENV_OFFSET 0x0 ++#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) ++#define CONFIG_SYS_REDUNDAND_ENVIRONMENT ++#endif ++ ++/* SPI flash. */ ++#define CONFIG_CMD_SF ++#define CONFIG_SPI_FLASH ++#define CONFIG_SPI_FLASH_WINBOND ++#define CONFIG_SF_DEFAULT_SPEED 24000000 ++ ++/* Network. */ ++#define CONFIG_PHY_GIGE ++#define CONFIG_PHYLIB ++#define CONFIG_PHY_SMSC ++ ++/* NAND support */ ++#ifdef CONFIG_NAND ++#define CONFIG_CMD_NAND ++#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT) ++#define MTDIDS_DEFAULT "nand0=omap2-nand.0" ++ ++#ifndef CONFIG_NAND512MB ++#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \ ++ "128k(SPL.backup1)," \ ++ "128k(SPL.backup2)," \ ++ "128k(SPL.backup3),1792k(u-boot)," \ ++ "128k(u-boot-spl-os)," \ ++ "128k(u-boot-env),5m(kernel),-(rootfs)" ++#define CONFIG_ENV_IS_IN_NAND ++#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ ++#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ ++#else ++#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:256k(SPL)," \ ++ "256k(SPL.backup1)," \ ++ "256k(SPL.backup2)," \ ++ "256k(SPL.backup3),2048k(u-boot)," \ ++ "256k(u-boot-spl-os)," \ ++ "256k(u-boot-env),5m(kernel),-(rootfs)" ++#define CONFIG_ENV_IS_IN_NAND ++#define CONFIG_ENV_OFFSET 0x340000 /* environment starts here */ ++#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ ++#endif ++ ++#endif ++#endif ++ ++/* ++ * NOR Size = 16 MiB ++ * Number of Sectors/Blocks = 128 ++ * Sector Size = 128 KiB ++ * Word length = 16 bits ++ * Default layout: ++ * 0x000000 - 0x07FFFF : U-Boot (512 KiB) ++ * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB) ++ * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB) ++ * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB) ++ * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB) ++ */ ++#if defined(CONFIG_NOR) ++#undef CONFIG_SYS_NO_FLASH ++#define CONFIG_CMD_FLASH ++#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE ++#define CONFIG_SYS_FLASH_PROTECTION ++#define CONFIG_SYS_FLASH_CFI ++#define CONFIG_FLASH_CFI_DRIVER ++#define CONFIG_FLASH_CFI_MTD ++#define CONFIG_SYS_MAX_FLASH_SECT 128 ++#define CONFIG_SYS_MAX_FLASH_BANKS 1 ++#define CONFIG_SYS_FLASH_BASE (0x08000000) ++#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT ++#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE ++/* Reduce SPL size by removing unlikey targets */ ++#ifdef CONFIG_NOR_BOOT ++#define CONFIG_ENV_IS_IN_FLASH ++#define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ ++#define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */ ++#define CONFIG_ENV_OFFSET_REDUND (768 << 10) /* 768 KiB */ ++#define MTDIDS_DEFAULT "nor0=physmap-flash.0" ++#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \ ++ "512k(u-boot)," \ ++ "128k(u-boot-env1)," \ ++ "128k(u-boot-env2)," \ ++ "4m(kernel),-(rootfs)" ++#endif ++#endif /* NOR support */ ++ ++#endif /* ! __CONFIG_CHILISOM_H */ +-- +2.5.0 + diff --git a/libre/uboot-chiliboard/0006-parabola-arm-modifications.patch b/libre/uboot-chiliboard/0006-parabola-arm-modifications.patch new file mode 100644 index 000000000..81d52444e --- /dev/null +++ b/libre/uboot-chiliboard/0006-parabola-arm-modifications.patch @@ -0,0 +1,177 @@ +diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h +index eacc9af..137ce89 100644 +--- a/include/configs/chiliboard.h ++++ b/include/configs/chiliboard.h +@@ -124,7 +124,6 @@ + * as that will normally be within the kernel lowmem and thus visible via + * bootm_size and we only run on platforms with 256MB or more of memory. + */ +-#ifdef CONFIG_RAM128MB + #define DEFAULT_LINUX_BOOT_ENV \ + "loadaddr=0x82000000\0" \ + "kernel_addr_r=0x82000000\0" \ +@@ -133,16 +132,6 @@ + "rdaddr=0x84080000\0" \ + "ramdisk_addr_r=0x84080000\0" \ + "bootm_size=0x8000000\0" +-#else +-#define DEFAULT_LINUX_BOOT_ENV \ +- "loadaddr=0x82000000\0" \ +- "kernel_addr_r=0x82000000\0" \ +- "fdtaddr=0x88000000\0" \ +- "fdt_addr_r=0x88000000\0" \ +- "rdaddr=0x88080000\0" \ +- "ramdisk_addr_r=0x88080000\0" \ +- "bootm_size=0x10000000\0" +-#endif + + /* + * Default to a quick boot delay. +@@ -258,6 +247,7 @@ + #define CONFIG_CMD_ASKENV + #define CONFIG_CMD_ECHO + #define CONFIG_CMD_BOOTZ ++#define CONFIG_SUPPORT_RAW_INITRD + + /* + * Common filesystems support. When we have removable storage we +@@ -398,6 +388,9 @@ + #define CONFIG_EFI_PARTITION + #define CONFIG_PARTITION_UUIDS + #define CONFIG_CMD_PART ++#define CONFIG_CMD_SETEXPR ++ ++#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre" + + #ifdef CONFIG_NAND + #ifndef CONFIG_NAND512MB +@@ -441,18 +434,16 @@ + #define CONFIG_EXTRA_ENV_SETTINGS \ + DEFAULT_LINUX_BOOT_ENV \ + "boot_fdt=try\0" \ +- "bootpart=0:2\0" \ ++ "bootpart=0:1\0" \ + "bootdir=/boot\0" \ +- "bootfile=zImage\0" \ +- "fdtfile=undefined\0" \ ++ "fdtdir=/boot/dtbs/linux-libre\0" \ ++ "bootfile=vmlinuz-linux-libre\0" \ ++ "fdtfile=\0" \ + "console=ttyO0,115200n8\0" \ + "partitions=" \ + "uuid_disk=${uuid_gpt_disk};" \ + "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ + "optargs=\0" \ +- "mmcdev=0\0" \ +- "mmcroot=/dev/mmcblk0p2 rw\0" \ +- "mmcrootfstype=ext4 rootwait\0" \ + "rootpath=/export/rootfs\0" \ + "nfsopts=nolock\0" \ + "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ +@@ -461,8 +452,7 @@ + "ramrootfstype=ext2\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ +- "root=${mmcroot} " \ +- "rootfstype=${mmcrootfstype}\0" \ ++ "root=${root}\0" \ + "spiroot=/dev/mtdblock4 rw\0" \ + "spirootfstype=jffs2\0" \ + "spisrcaddr=0xe0000\0" \ +@@ -477,46 +467,47 @@ + "root=/dev/nfs " \ + "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ + "ip=dhcp\0" \ +- "bootenv=uEnv.txt\0" \ +- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ +- "importbootenv=echo Importing environment from mmc ...; " \ +- "env import -t $loadaddr $filesize\0" \ + "ramargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${ramroot} " \ + "rootfstype=${ramrootfstype}\0" \ +- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ +- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ +- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ +- "mmcloados=run mmcargs; " \ +- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ +- "if run loadfdt; then " \ +- "bootz ${loadaddr} - ${fdtaddr}; " \ +- "else " \ +- "if test ${boot_fdt} = try; then " \ +- "bootz; " \ +- "else " \ +- "echo WARN: Cannot load the DT; " \ +- "fi; " \ +- "fi; " \ +- "else " \ +- "bootz; " \ +- "fi;\0" \ +- "mmcboot=mmc dev ${mmcdev}; " \ +- "if mmc rescan; then " \ +- "echo SD/MMC found on device ${mmcdev};" \ +- "if run loadbootenv; then " \ +- "echo Loaded environment from ${bootenv};" \ +- "run importbootenv;" \ +- "fi;" \ +- "if test -n $uenvcmd; then " \ +- "echo Running uenvcmd ...;" \ +- "run uenvcmd;" \ +- "fi;" \ +- "if run loadimage; then " \ +- "run mmcloados;" \ +- "fi;" \ +- "fi;\0" \ ++ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ ++ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ ++ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ ++ "mmcboot=for devtype in mmc; do " \ ++ "for devnum in 0 1; do " \ ++ "if ${devtype} dev ${devnum}; then " \ ++ "echo ${devtype} found on device ${devnum};" \ ++ "setenv bootpart ${devnum}:1;" \ ++ "part uuid ${devtype} ${bootpart} uuid;" \ ++ "setenv root PARTUUID=${uuid} rw rootwait;" \ ++ "echo Checking for: ${bootdir}/uEnv.txt ...;" \ ++ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \ ++ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ ++ "env import -t ${loadaddr} ${filesize};" \ ++ "echo Loaded environment from ${bootdir}/uEnv.txt;" \ ++ "echo Checking if uenvcmd is set ...;" \ ++ "if test -n ${uenvcmd}; then " \ ++ "echo Running uenvcmd ...;" \ ++ "run uenvcmd;" \ ++ "fi;" \ ++ "fi;" \ ++ "if run loadimage; then " \ ++ "run mmcargs;" \ ++ "if run loadfdt; then " \ ++ "if run loadrd; then " \ ++ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ ++ "else " \ ++ "bootz ${loadaddr} - ${fdtaddr};" \ ++ "fi;" \ ++ "fi;" \ ++ "else " \ ++ "echo No kernel found;" \ ++ "fi;" \ ++ "setexpr devnum ${devnum} + 1;" \ ++ "fi;" \ ++ "done;" \ ++ "done;\0" \ + "spiboot=echo Booting from spi ...; " \ + "run spiargs; " \ + "sf probe ${spibusno}:0; " \ +@@ -541,9 +532,6 @@ + #define CONFIG_BOOTCOMMAND \ + "run findfdt; " \ + "run mmcboot;" \ +- "setenv mmcdev 1; " \ +- "setenv bootpart 1:2; " \ +- "run mmcboot;" \ + "run nandboot;" + + /* NS16550 Configuration */ +-- +2.5.0 + diff --git a/libre/uboot-chiliboard/0006-parabola-arm-modifications.patch.new b/libre/uboot-chiliboard/0006-parabola-arm-modifications.patch.new new file mode 100644 index 000000000..391fc504a --- /dev/null +++ b/libre/uboot-chiliboard/0006-parabola-arm-modifications.patch.new @@ -0,0 +1,174 @@ +diff --git a/u-boot-2014.07.orig/include/configs/chiliboard.h b/u-boot-2014.07/include/configs/chiliboard.h +index eacc9af..137ce89 100644 +--- a/u-boot-2014.07.orig/include/configs/chiliboard.h ++++ b/u-boot-2014.07/include/configs/chiliboard.h +@@ -124,7 +124,6 @@ + * as that will normally be within the kernel lowmem and thus visible via + * bootm_size and we only run on platforms with 256MB or more of memory. + */ +-#ifdef CONFIG_RAM128MB + #define DEFAULT_LINUX_BOOT_ENV \ + "loadaddr=0x82000000\0" \ + "kernel_addr_r=0x82000000\0" \ +@@ -133,16 +132,6 @@ + "rdaddr=0x84080000\0" \ + "ramdisk_addr_r=0x84080000\0" \ + "bootm_size=0x8000000\0" +-#else +-#define DEFAULT_LINUX_BOOT_ENV \ +- "loadaddr=0x82000000\0" \ +- "kernel_addr_r=0x82000000\0" \ +- "fdtaddr=0x88000000\0" \ +- "fdt_addr_r=0x88000000\0" \ +- "rdaddr=0x88080000\0" \ +- "ramdisk_addr_r=0x88080000\0" \ +- "bootm_size=0x10000000\0" +-#endif + + /* + * Default to a quick boot delay. +@@ -258,6 +247,7 @@ + #define CONFIG_CMD_ASKENV + #define CONFIG_CMD_ECHO + #define CONFIG_CMD_BOOTZ ++#define CONFIG_SUPPORT_RAW_INITRD + + /* + * Common filesystems support. When we have removable storage we +@@ -398,6 +388,9 @@ + #define CONFIG_EFI_PARTITION + #define CONFIG_PARTITION_UUIDS + #define CONFIG_CMD_PART ++#define CONFIG_CMD_SETEXPR ++ ++#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre" + + #ifdef CONFIG_NAND + #ifndef CONFIG_NAND512MB +@@ -441,18 +434,16 @@ + #define CONFIG_EXTRA_ENV_SETTINGS \ + DEFAULT_LINUX_BOOT_ENV \ + "boot_fdt=try\0" \ +- "bootpart=0:2\0" \ ++ "bootpart=0:1\0" \ + "bootdir=/boot\0" \ +- "bootfile=zImage\0" \ +- "fdtfile=undefined\0" \ ++ "fdtdir=/boot/dtbs/linux-libre\0" \ ++ "bootfile=vmlinuz-linux-libre\0" \ ++ "fdtfile=\0" \ + "console=ttyO0,115200n8\0" \ + "partitions=" \ + "uuid_disk=${uuid_gpt_disk};" \ + "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ + "optargs=\0" \ +- "mmcdev=0\0" \ +- "mmcroot=/dev/mmcblk0p2 rw\0" \ +- "mmcrootfstype=ext4 rootwait\0" \ + "rootpath=/export/rootfs\0" \ + "nfsopts=nolock\0" \ + "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ +@@ -461,8 +452,7 @@ + "ramrootfstype=ext2\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ +- "root=${mmcroot} " \ +- "rootfstype=${mmcrootfstype}\0" \ ++ "root=${root}\0" \ + "spiroot=/dev/mtdblock4 rw\0" \ + "spirootfstype=jffs2\0" \ + "spisrcaddr=0xe0000\0" \ +@@ -477,46 +467,47 @@ + "root=/dev/nfs " \ + "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ + "ip=dhcp\0" \ +- "bootenv=uEnv.txt\0" \ +- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ +- "importbootenv=echo Importing environment from mmc ...; " \ +- "env import -t $loadaddr $filesize\0" \ + "ramargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${ramroot} " \ + "rootfstype=${ramrootfstype}\0" \ +- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ +- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ +- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ +- "mmcloados=run mmcargs; " \ +- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ +- "if run loadfdt; then " \ +- "bootz ${loadaddr} - ${fdtaddr}; " \ +- "else " \ +- "if test ${boot_fdt} = try; then " \ +- "bootz; " \ +- "else " \ +- "echo WARN: Cannot load the DT; " \ +- "fi; " \ +- "fi; " \ +- "else " \ +- "bootz; " \ +- "fi;\0" \ +- "mmcboot=mmc dev ${mmcdev}; " \ +- "if mmc rescan; then " \ +- "echo SD/MMC found on device ${mmcdev};" \ +- "if run loadbootenv; then " \ +- "echo Loaded environment from ${bootenv};" \ +- "run importbootenv;" \ +- "fi;" \ +- "if test -n $uenvcmd; then " \ +- "echo Running uenvcmd ...;" \ +- "run uenvcmd;" \ +- "fi;" \ +- "if run loadimage; then " \ +- "run mmcloados;" \ +- "fi;" \ +- "fi;\0" \ ++ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ ++ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ ++ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ ++ "mmcboot=for devtype in mmc; do " \ ++ "for devnum in 0 1; do " \ ++ "if ${devtype} dev ${devnum}; then " \ ++ "echo ${devtype} found on device ${devnum};" \ ++ "setenv bootpart ${devnum}:1;" \ ++ "part uuid ${devtype} ${bootpart} uuid;" \ ++ "setenv root PARTUUID=${uuid} rw rootwait;" \ ++ "echo Checking for: ${bootdir}/uEnv.txt ...;" \ ++ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \ ++ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ ++ "env import -t ${loadaddr} ${filesize};" \ ++ "echo Loaded environment from ${bootdir}/uEnv.txt;" \ ++ "echo Checking if uenvcmd is set ...;" \ ++ "if test -n ${uenvcmd}; then " \ ++ "echo Running uenvcmd ...;" \ ++ "run uenvcmd;" \ ++ "fi;" \ ++ "fi;" \ ++ "if run loadimage; then " \ ++ "run mmcargs;" \ ++ "if run loadfdt; then " \ ++ "if run loadrd; then " \ ++ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ ++ "else " \ ++ "bootz ${loadaddr} - ${fdtaddr};" \ ++ "fi;" \ ++ "fi;" \ ++ "else " \ ++ "echo No kernel found;" \ ++ "fi;" \ ++ "setexpr devnum ${devnum} + 1;" \ ++ "fi;" \ ++ "done;" \ ++ "done;\0" \ + "spiboot=echo Booting from spi ...; " \ + "run spiargs; " \ + "sf probe ${spibusno}:0; " \ +@@ -541,9 +532,6 @@ + #define CONFIG_BOOTCOMMAND \ + "run findfdt; " \ + "run mmcboot;" \ +- "setenv mmcdev 1; " \ +- "setenv bootpart 1:2; " \ +- "run mmcboot;" \ + "run nandboot;" + + /* NS16550 Configuration */ diff --git a/libre/uboot-chiliboard/PKGBUILD b/libre/uboot-chiliboard/PKGBUILD new file mode 100644 index 000000000..4231c9844 --- /dev/null +++ b/libre/uboot-chiliboard/PKGBUILD @@ -0,0 +1,59 @@ +# U-Boot: ChiliBoard +# Maintainer: André Silva + +buildarch=4 + +pkgname=uboot-chiliboard +pkgver=2014.07 +pkgrel=1.parabola1 +pkgdesc="U-Boot for ChiliBoard" +arch=('armv7h') +url="http://git.denx.de/u-boot.git/" +replaces=('uboot-chiliboard-linux-libre') +conflicts=('uboot4extlinux-chiliboard' 'uboot4grub-chiliboard') +makedepends=('bc') +depends=('linux-libre') +license=('GPL') +install=${pkgname}.install +source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2" + '0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch' + '0002-ARM-asm-io.h-use-static-inline.patch' + '0003-common-main.c-make-show_boot_progress-__weak.patch' + '0004-common-board_f-cosmetic-use-__weak-for-leds.patch' + '0005-chiliboard-support.patch' + '0006-parabola-arm-modifications.patch' + 'uEnv.txt') +md5sums=('36d4bad687edcafa396fee607e505d4e' + 'e070e8b5cf8628b6440dfc9dbd87cb65' + '318310de19110167fe15ceac3ae32f7d' + '1792346431786e1442c4059cd3f288ed' + '2a32a77f123391c02935754ced2743c2' + '5951c799b35c526f02edbcb3eb1295fc' + '1bc6fd3299a42e15c5f14741aac15052' + '0afad1f6f3f8609db6e1f5bb322b2a1a') + +prepare() { + cd u-boot-${pkgver} + patch -Np1 -i ../0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch + patch -Np1 -i ../0002-ARM-asm-io.h-use-static-inline.patch + patch -Np1 -i ../0003-common-main.c-make-show_boot_progress-__weak.patch + patch -Np1 -i ../0004-common-board_f-cosmetic-use-__weak-for-leds.patch + patch -Np1 -i ../0005-chiliboard-support.patch + patch -Np1 -i ../0006-parabola-arm-modifications.patch +} + +build() { + cd u-boot-${pkgver} + + unset CFLAGS CXXFLAGS LDFLAGS + + make distclean + make chiliboard_config + make +} + +package() { + cd u-boot-${pkgver} + mkdir -p "${pkgdir}"/boot + cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot +} diff --git a/libre/uboot-chiliboard/uEnv.txt b/libre/uboot-chiliboard/uEnv.txt new file mode 100644 index 000000000..a9f26096d --- /dev/null +++ b/libre/uboot-chiliboard/uEnv.txt @@ -0,0 +1 @@ +optargs= diff --git a/libre/uboot-chiliboard/uboot-chiliboard.install b/libre/uboot-chiliboard/uboot-chiliboard.install new file mode 100644 index 000000000..24ccc1acb --- /dev/null +++ b/libre/uboot-chiliboard/uboot-chiliboard.install @@ -0,0 +1,32 @@ +flash_instructions() { + echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k" + echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k" +} + +flash_uboot() { + root=$(mount | awk '/ on \/ / { print $1; }') + if [[ $root =~ ^/dev/mmcblk.*$ ]]; then + root=${root:0:12} + echo "A new U-Boot version needs to be flashed onto $root." + echo "Do this now? [y|N]" + read -r shouldwe + if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then + dd if=/boot/MLO of=$root count=1 seek=1 conv=notrunc bs=128k + dd if=/boot/u-boot.img of=$root count=2 seek=1 conv=notrunc bs=384k + else + echo "You can do this later by running:" + flash_instructions + fi + else + echo "Flash the new U-Boot version onto your boot device. For example:" + flash_instructions + fi +} + +post_install() { + flash_uboot +} + +post_upgrade() { + flash_uboot +} -- cgit v1.2.3