From 7385c6143c1b587bca68deade6e5989d11879767 Mon Sep 17 00:00:00 2001
From: freaj <freaj@riseup.net>
Date: Mon, 30 Mar 2015 10:36:00 +0200
Subject: openrc-net-20150330-1: updating version

---
 pcr/openrc-net/PKGBUILD                    |  16 +--
 pcr/openrc-net/autofs5.initd               |  70 +++++++++++++
 pcr/openrc-net/hostapd-init.d              |  39 +++++++
 pcr/openrc-net/ip6tables-1.4.13.confd      |  19 ++++
 pcr/openrc-net/iptables-1.4.13-r1.init     | 130 +++++++++++++++++++++++
 pcr/openrc-net/iptables-1.4.13.confd       |  19 ++++
 pcr/openrc-net/lighttpd.confd              |  12 +++
 pcr/openrc-net/lighttpd.initd              |  73 +++++++++++++
 pcr/openrc-net/mit-krb5kadmind.initd-r1    |  25 +++++
 pcr/openrc-net/mit-krb5kdc.initd-r1        |  24 +++++
 pcr/openrc-net/mit-krb5kpropd.initd-r1     |  24 +++++
 pcr/openrc-net/nfs.confd                   |  38 +++++++
 pcr/openrc-net/nfs.initd                   | 163 +++++++++++++++++++++++++++++
 pcr/openrc-net/nfsclient.confd             |  18 ++++
 pcr/openrc-net/nfsclient.initd             |  34 ++++++
 pcr/openrc-net/nginx.initd-r2              |  89 ++++++++++++++++
 pcr/openrc-net/openntpd.conf.d-20080406-r6 |   7 ++
 pcr/openrc-net/openntpd.init.d-20080406-r6 |  15 +++
 pcr/openrc-net/openvpn-2.1.conf            |  18 ++++
 pcr/openrc-net/openvpn-2.1.init            | 133 +++++++++++++++++++++++
 pcr/openrc-net/polipo.initd                |  54 ++++++++++
 pcr/openrc-net/postfix.rc6.2.7             |  86 +++++++++++++++
 pcr/openrc-net/privoxy.initd               |  29 +++++
 pcr/openrc-net/quota.confd                 |  20 ++++
 pcr/openrc-net/quota.rc7                   |  38 +++++++
 pcr/openrc-net/rpc.gssd.initd              |  24 +++++
 pcr/openrc-net/rpc.idmapd.initd            |  26 +++++
 pcr/openrc-net/rpc.pipefs.initd            |  33 ++++++
 pcr/openrc-net/rpc.rquotad.initd           |  26 +++++
 pcr/openrc-net/rpc.statd.initd             |  33 ++++++
 pcr/openrc-net/rpc.svcgssd.initd           |  24 +++++
 pcr/openrc-net/rpc.yppasswdd-r1            |  22 ++++
 pcr/openrc-net/rpc.yppasswdd.confd         |   7 ++
 pcr/openrc-net/rpc.ypxfrd-2.23             |  22 ++++
 pcr/openrc-net/rpc.ypxfrd.confd            |   3 +
 pcr/openrc-net/rpcbind.initd               |  22 ++++
 pcr/openrc-net/rsyncd.conf.d               |   5 +
 pcr/openrc-net/rsyncd.init.d-r1            |  12 +++
 pcr/openrc-net/samba4.confd                |  38 +++++++
 pcr/openrc-net/samba4.initd-r1             |  56 ++++++++++
 pcr/openrc-net/slapd-confd-2.4.28-r1       |  26 +++++
 pcr/openrc-net/slapd-initd-2.4.28-r1       |  36 +++++++
 pcr/openrc-net/slpd-init                   |  89 ++++++++++++++++
 pcr/openrc-net/squid.confd-r1              |  13 +++
 pcr/openrc-net/squid.initd-r4              | 118 +++++++++++++++++++++
 pcr/openrc-net/sshd.confd                  |  21 ++++
 pcr/openrc-net/sshd.rc6.4                  |  87 +++++++++++++++
 pcr/openrc-net/tor.confd                   |   3 +
 pcr/openrc-net/tor.initd-r6                |  60 +++++++++++
 pcr/openrc-net/transmission-daemon.confd.4 |  14 +++
 pcr/openrc-net/transmission-daemon.initd.9 |  73 +++++++++++++
 pcr/openrc-net/ufw-2.initd                 | 137 ++++++++++++++++++++++++
 pcr/openrc-net/ufw.confd                   |   5 +
 pcr/openrc-net/vsftpd-checkconfig.sh       |  29 +++++
 pcr/openrc-net/vsftpd.init                 |  51 +++++++++
 pcr/openrc-net/xinetd.confd                |   3 +
 pcr/openrc-net/xinetd.rc6                  |  33 ++++++
 pcr/openrc-net/ypbind.confd-r1             |   4 +
 pcr/openrc-net/ypbind.initd                |  41 ++++++++
 pcr/openrc-net/ypserv                      |  23 ++++
 pcr/openrc-net/ypserv.confd                |   4 +
 61 files changed, 2408 insertions(+), 8 deletions(-)
 create mode 100644 pcr/openrc-net/autofs5.initd
 create mode 100644 pcr/openrc-net/hostapd-init.d
 create mode 100644 pcr/openrc-net/ip6tables-1.4.13.confd
 create mode 100644 pcr/openrc-net/iptables-1.4.13-r1.init
 create mode 100644 pcr/openrc-net/iptables-1.4.13.confd
 create mode 100644 pcr/openrc-net/lighttpd.confd
 create mode 100644 pcr/openrc-net/lighttpd.initd
 create mode 100644 pcr/openrc-net/mit-krb5kadmind.initd-r1
 create mode 100644 pcr/openrc-net/mit-krb5kdc.initd-r1
 create mode 100644 pcr/openrc-net/mit-krb5kpropd.initd-r1
 create mode 100644 pcr/openrc-net/nfs.confd
 create mode 100644 pcr/openrc-net/nfs.initd
 create mode 100644 pcr/openrc-net/nfsclient.confd
 create mode 100644 pcr/openrc-net/nfsclient.initd
 create mode 100644 pcr/openrc-net/nginx.initd-r2
 create mode 100644 pcr/openrc-net/openntpd.conf.d-20080406-r6
 create mode 100644 pcr/openrc-net/openntpd.init.d-20080406-r6
 create mode 100644 pcr/openrc-net/openvpn-2.1.conf
 create mode 100644 pcr/openrc-net/openvpn-2.1.init
 create mode 100644 pcr/openrc-net/polipo.initd
 create mode 100644 pcr/openrc-net/postfix.rc6.2.7
 create mode 100644 pcr/openrc-net/privoxy.initd
 create mode 100644 pcr/openrc-net/quota.confd
 create mode 100644 pcr/openrc-net/quota.rc7
 create mode 100644 pcr/openrc-net/rpc.gssd.initd
 create mode 100644 pcr/openrc-net/rpc.idmapd.initd
 create mode 100644 pcr/openrc-net/rpc.pipefs.initd
 create mode 100644 pcr/openrc-net/rpc.rquotad.initd
 create mode 100644 pcr/openrc-net/rpc.statd.initd
 create mode 100644 pcr/openrc-net/rpc.svcgssd.initd
 create mode 100644 pcr/openrc-net/rpc.yppasswdd-r1
 create mode 100644 pcr/openrc-net/rpc.yppasswdd.confd
 create mode 100644 pcr/openrc-net/rpc.ypxfrd-2.23
 create mode 100644 pcr/openrc-net/rpc.ypxfrd.confd
 create mode 100644 pcr/openrc-net/rpcbind.initd
 create mode 100644 pcr/openrc-net/rsyncd.conf.d
 create mode 100644 pcr/openrc-net/rsyncd.init.d-r1
 create mode 100644 pcr/openrc-net/samba4.confd
 create mode 100644 pcr/openrc-net/samba4.initd-r1
 create mode 100644 pcr/openrc-net/slapd-confd-2.4.28-r1
 create mode 100644 pcr/openrc-net/slapd-initd-2.4.28-r1
 create mode 100644 pcr/openrc-net/slpd-init
 create mode 100644 pcr/openrc-net/squid.confd-r1
 create mode 100644 pcr/openrc-net/squid.initd-r4
 create mode 100644 pcr/openrc-net/sshd.confd
 create mode 100644 pcr/openrc-net/sshd.rc6.4
 create mode 100644 pcr/openrc-net/tor.confd
 create mode 100644 pcr/openrc-net/tor.initd-r6
 create mode 100644 pcr/openrc-net/transmission-daemon.confd.4
 create mode 100644 pcr/openrc-net/transmission-daemon.initd.9
 create mode 100644 pcr/openrc-net/ufw-2.initd
 create mode 100644 pcr/openrc-net/ufw.confd
 create mode 100644 pcr/openrc-net/vsftpd-checkconfig.sh
 create mode 100644 pcr/openrc-net/vsftpd.init
 create mode 100644 pcr/openrc-net/xinetd.confd
 create mode 100644 pcr/openrc-net/xinetd.rc6
 create mode 100644 pcr/openrc-net/ypbind.confd-r1
 create mode 100644 pcr/openrc-net/ypbind.initd
 create mode 100644 pcr/openrc-net/ypserv
 create mode 100644 pcr/openrc-net/ypserv.confd

diff --git a/pcr/openrc-net/PKGBUILD b/pcr/openrc-net/PKGBUILD
index a0f5bf1a5..ed3450d63 100644
--- a/pcr/openrc-net/PKGBUILD
+++ b/pcr/openrc-net/PKGBUILD
@@ -116,7 +116,7 @@ pkgname=('autofs-openrc'
 	'wicd-openrc'
 	'syncthing-openrc'
 	'nginx-openrc')
-pkgver=20150119
+pkgver=20150330
 pkgrel=1
 pkgdesc="OpenRC init scripts"
 arch=('any')
@@ -685,7 +685,7 @@ sha256sums=('8e093a18582c3a20283ed1c09de9acc6832a80b1d5a02962599db0535d38af19'
             'e8a413e9102948b336f60041fc3cade33125faf56d8319ee65d9f3c63199a8e7'
             'a157630c3bdc9565cca8240ee1e6539fc9cbc1e4642c40e0965e3609d1021bac'
             '099f668e1ad42ed9446b15675032a1186715d1fe9e4a1b24dfb787e68495d2b6'
-            '049a231908dc2c5f82446712d71d5e75d430bd043b53eead1529f2d81e1595ab'
+            'b5811c6adf10d6210e5685b4e999f0449ac492379d055226eeb140f00d9b8702'
             '204aaf81d51dc119cee1d1ff3ae3dd50af666af2f8b2a363fd1bf442d4dcee00'
             '916f4b14095ee4ec8a510391c883e9f01868e18d79a3d5cbeb13a104a793d45d'
             'b9701b9ea509638ee1ed74bec38a22e6bd7358763497ce53c146d2faf9e97a61'
@@ -697,15 +697,15 @@ sha256sums=('8e093a18582c3a20283ed1c09de9acc6832a80b1d5a02962599db0535d38af19'
             'c374ea05d7e9f15e10c8f9dbd0cad6548e0f92aef7de33e5dbc27222e9407e7b'
             'bb6e6721f33e6582a91025f3500e159a599fb856d699e9394093e1018c7925e0'
             'b1515472c32927039b38f6c3a797cbc54a5a300b5d6fa54df9550174afa2b7f8'
-            '22bba4ee5d58bae422650875c7c8a797a52fc121ddd02d48297c075b8a35401e'
+            'c652a4fe8a43dc68a818345db2b3acc560663b5b6c969324d4f23afb0fb96a94'
             '1e77bc6fb2ceb266f724818898bd42bec47512a5a7ede6660e0565ea1c58d619'
-            'a1ecfb9441052d374b6bc2b77554a3253a4e4c231c76114b3313d2cc68e561b8'
-            '426996fc12758565d4c827762df76634f40cc8915988ab89ba5e81aeb561cf46'
+            'e8842fca856eae598fb8fe15ed8d3cef13e61851217be66b8cc4087af8cee8ad'
+            '122ade9931af8f64696375c9c66d00f64a90949616e00e9a00a7264c50c2e8a7'
             '3ce65326859c43983dad25ad2d4731488c488037796e39b6b5eda336e8bf81ef'
             'ebee63e81fb952474c34b745913e8774b29c9cc65180d363a33d991e478aea2d'
             '00d9c29280a83e8458c33139d04a9b38c6fdba9d7cb9b420ca83bf6b10e6435d'
             'f1c460d8b0e91e54a551397d755135d05a3728d81de596535bf8bda074455677'
-            '0c7bd35a14da6c0c2577f09ae82a41ddb693a88157eeaf80684616f79be6c304'
+            'a5731b8f681111421277c6c1c43b3e1d303790d9f8aebd977a895b0ed7a73bc3'
             '5bca003ec3b67c7c78519aede1d82002579006ccfecce8f87b559df719f82e92'
             '1fc515a6816b8a750db513df0b3b9bf8dd8bd4c4e9051205521acadfdebeae0f'
             '7f228796e020c0779c52683f684197d50662ae890b1ae193ffa9acf157ccd143'
@@ -729,7 +729,7 @@ sha256sums=('8e093a18582c3a20283ed1c09de9acc6832a80b1d5a02962599db0535d38af19'
             '069aa7382b40aecebf26ef53f3f4c49890314e0357925c84b3c15f1d0b913be0'
             '657b5305923b2a5de9eb96931aaaa28d6e997ace6c40793d905887798094258c'
             '2de7c7c1edfe3ae0480e22d988a564db3bb873050929ebb6e8361d7a1288ddda'
-            'e6cf3df546aae57bb10e2b4282a9ccd79741473ef9dbdbd7628a16c84622da06'
+            '4297952eeeb02b5c4f2f750742614513fa6a0c8d291a9a0adcec1ec0098fcd78'
             'e401e2cf7c0180a170d3dc3e91d7e98002bae7b013df72813b7bcf89b864fb3a'
             '6aeb4ec9b8ccc062b5ee8c609830c05cee3ed790fa90d7b2d8cf82a09e317c5c'
             '79f6c6ed4875f00fe702f69e9a6180a032d5a47f3e58e892e6ba0e2746b6fec8'
@@ -746,7 +746,7 @@ sha256sums=('8e093a18582c3a20283ed1c09de9acc6832a80b1d5a02962599db0535d38af19'
             '91fb1497b3a6ef0bb3a3d5baefdff801d8ff1cba27aaf742303415550814a09b'
             'fca7183a7676f0f471878925c8fbec20b7a0bff01551c0ad2b34d4d8a826c876'
             '41d780f291847e19f632428bbf27c3f289414afd237546d2974da1b75384c25c'
-            '49da1b5f267927023bc092adcf89d406ec294584039d6bca6b7aea0a9e7c4c4f'
+            '17cfda4d50a3d3fd74f36c79dec78b5f89fe6b45712729d8bbdbddd7e8ea9a10'
             '66b2b53b077ddc2d5eb1d81faa99fa0f4f0db01520900ba948001e539bfe02d8'
             'eb4a4315916fe3f8688c1da5bb5c249a1f402e61617452288d5b0668078c955c'
             '63708b1a7b61ae791df64bb4cefa01dc12236f96bb67fe6d0b2c513e11c81f3e'
diff --git a/pcr/openrc-net/autofs5.initd b/pcr/openrc-net/autofs5.initd
new file mode 100644
index 000000000..939444e02
--- /dev/null
+++ b/pcr/openrc-net/autofs5.initd
@@ -0,0 +1,70 @@
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/autofs/files/autofs5.initd,v 1.4 2013/11/10 15:53:29 tomwij Exp $
+
+DAEMON=/usr/sbin/automount
+PIDFILE=/var/run/autofs.pid
+DEVICE=autofs
+
+depend() {
+	need localmount	
+	use ypbind nfs slapd portmap net
+}
+
+extra_started_commands="reload"
+
+start() {
+	ebegin "Starting automounter"
+
+	# Ensure autofs support is loaded
+	grep -q autofs /proc/filesystems || modprobe -q autofs4
+	if [ $? -ne 0 ]; then
+		eend 1 "No autofs support available in kernel"
+		return 1
+	fi
+
+	# Check misc device
+	if [ -n "${USE_MISC_DEVICE}" -a "${USE_MISC_DEVICE}" = "yes" ]; then
+		sleep 1
+		if [ -e "/proc/misc" ]; then
+			MINOR=$(awk "/${DEVICE}/ {print \$1}" /proc/misc)
+			if [ -n "${MINOR}" -a ! -c "/dev/${DEVICE}" ]; then
+				mknod -m 0600 "/dev/${DEVICE}" c 10 ${MINOR}
+				if [ $? -ne 0 ]; then
+					eend 1 "Could not create '/dev/${DEVICE}'"
+					return 1
+				fi
+			fi
+		fi
+		if [ -x /sbin/restorecon -a -c "/dev/${DEVICE}" ]; then
+			/sbin/restorecon "/dev/${DEVICE}"
+			if [ $? -ne 0 ]; then
+				eend 1 "Failed to execute '/sbin/restorecon \"/dev/${DEVICE}\"'"
+				return 1
+			fi
+		fi
+	else
+		[ -c "/dev/${DEVICE}" ] && rm -rf "/dev/${DEVICE}"
+	fi
+
+	start-stop-daemon --start --exec ${DAEMON} -- -p ${PIDFILE} ${OPTIONS}
+
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping automounter"
+	start-stop-daemon --stop --quiet -R TERM/45 -p ${PIDFILE}
+	eend $?
+}
+
+reload() {
+	ebegin "Reloading automounter"
+	if [ ! -r "${PIDFILE}" ]; then
+		eend 1 "automount not running"
+	else
+		kill -s HUP $(cat "${PIDFILE}") 2> /dev/null
+		eend $?
+	fi
+}
diff --git a/pcr/openrc-net/hostapd-init.d b/pcr/openrc-net/hostapd-init.d
new file mode 100644
index 000000000..d09002b66
--- /dev/null
+++ b/pcr/openrc-net/hostapd-init.d
@@ -0,0 +1,39 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-wireless/hostapd/files/hostapd-init.d,v 1.4 2014/03/21 19:47:14 gurligebis Exp $
+
+pidfile="/run/${SVCNAME}.pid"
+command="/usr/sbin/hostapd"
+command_args="-P ${pidfile} -B ${OPTIONS} ${CONFIGS}"
+
+extra_started_commands="reload"
+
+depend() {
+	local myneeds=
+	for iface in ${INTERFACES}; do
+		myneeds="${myneeds} net.${iface}"
+	done
+
+	[ -n "${myneeds}" ] && need ${myneeds}
+	use logger
+}
+
+start_pre() {
+	local file
+
+	for file in ${CONFIGS}; do
+		if [ ! -r "${file}" ]; then
+			eerror "hostapd configuration file (${CONFIG}) not found"
+			return 1
+		fi
+	done
+}
+
+reload() {
+	start_pre || return 1
+
+	ebegin "Reloading ${SVCNAME} configuration"
+	kill -HUP $(cat ${pidfile}) > /dev/null 2>&1
+	eend $?
+}
diff --git a/pcr/openrc-net/ip6tables-1.4.13.confd b/pcr/openrc-net/ip6tables-1.4.13.confd
new file mode 100644
index 000000000..3bb36989d
--- /dev/null
+++ b/pcr/openrc-net/ip6tables-1.4.13.confd
@@ -0,0 +1,19 @@
+# /etc/conf.d/ip6tables
+
+# Location in which iptables initscript will save set rules on 
+# service shutdown
+IP6TABLES_SAVE="/var/lib/ip6tables/rules-save"
+
+# Options to pass to iptables-save and iptables-restore 
+SAVE_RESTORE_OPTIONS="-c"
+
+# Save state on stopping iptables
+SAVE_ON_STOP="yes"
+
+# If you need to log iptables messages as soon as iptables starts,
+# AND your logger does NOT depend on the network, then you may wish
+# to uncomment the next line.
+# If your logger depends on the network, and you uncomment this line
+# you will create an unresolvable circular dependency during startup.
+# After commenting or uncommenting this line, you must run 'rc-update -u'.
+#rc_use="logger"
diff --git a/pcr/openrc-net/iptables-1.4.13-r1.init b/pcr/openrc-net/iptables-1.4.13-r1.init
new file mode 100644
index 000000000..a63d07688
--- /dev/null
+++ b/pcr/openrc-net/iptables-1.4.13-r1.init
@@ -0,0 +1,130 @@
+#!/sbin/runscript
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-firewall/iptables/files/iptables-1.4.13-r1.init,v 1.3 2013/04/27 17:29:09 vapier Exp $
+
+extra_commands="check save panic"
+extra_started_commands="reload"
+
+iptables_name=${SVCNAME}
+case ${iptables_name} in
+iptables|ip6tables) ;;
+*) iptables_name="iptables" ;;
+esac
+
+iptables_bin="/sbin/${iptables_name}"
+case ${iptables_name} in
+	iptables)  iptables_proc="/proc/net/ip_tables_names"
+	           iptables_save=${IPTABLES_SAVE};;
+	ip6tables) iptables_proc="/proc/net/ip6_tables_names"
+	           iptables_save=${IP6TABLES_SAVE};;
+esac
+
+depend() {
+	need localmount #434774
+	before net
+}
+
+set_table_policy() {
+	local chains table=$1 policy=$2
+	case ${table} in
+		nat)    chains="PREROUTING POSTROUTING OUTPUT";;
+		mangle) chains="PREROUTING INPUT FORWARD OUTPUT POSTROUTING";;
+		filter) chains="INPUT FORWARD OUTPUT";;
+		*)      chains="";;
+	esac
+	local chain
+	for chain in ${chains} ; do
+		${iptables_bin} -t ${table} -P ${chain} ${policy}
+	done
+}
+
+checkkernel() {
+	if [ ! -e ${iptables_proc} ] ; then
+		eerror "Your kernel lacks ${iptables_name} support, please load"
+		eerror "appropriate modules and try again."
+		return 1
+	fi
+	return 0
+}
+checkconfig() {
+	if [ ! -f ${iptables_save} ] ; then
+		eerror "Not starting ${iptables_name}.  First create some rules then run:"
+		eerror "/etc/init.d/${iptables_name} save"
+		return 1
+	fi
+	return 0
+}
+
+start() {
+	checkconfig || return 1
+	ebegin "Loading ${iptables_name} state and starting firewall"
+	${iptables_bin}-restore ${SAVE_RESTORE_OPTIONS} < "${iptables_save}"
+	eend $?
+}
+
+stop() {
+	if [ "${SAVE_ON_STOP}" = "yes" ] ; then
+		save || return 1
+	fi
+	checkkernel || return 1
+	ebegin "Stopping firewall"
+	local a
+	for a in $(cat ${iptables_proc}) ; do
+		set_table_policy $a ACCEPT
+
+		${iptables_bin} -F -t $a
+		${iptables_bin} -X -t $a
+	done
+	eend $?
+}
+
+reload() {
+	checkkernel || return 1
+	checkrules || return 1
+	ebegin "Flushing firewall"
+	local a
+	for a in $(cat ${iptables_proc}) ; do
+		${iptables_bin} -F -t $a
+		${iptables_bin} -X -t $a
+	done
+	eend $?
+
+	start
+}
+
+checkrules() {
+	ebegin "Checking rules"
+	${iptables_bin}-restore --test ${SAVE_RESTORE_OPTIONS} < "${iptables_save}"
+	eend $?
+}
+
+check() {
+	# Short name for users of init.d script.
+	checkrules
+}
+
+save() {
+	ebegin "Saving ${iptables_name} state"
+	checkpath -q -d "$(dirname "${iptables_save}")"
+	checkpath -q -m 0600 -f "${iptables_save}"
+	${iptables_bin}-save ${SAVE_RESTORE_OPTIONS} > "${iptables_save}"
+	eend $?
+}
+
+panic() {
+	checkkernel || return 1
+	if service_started ${iptables_name}; then
+		rc-service ${iptables_name} stop
+	fi
+
+	local a
+	ebegin "Dropping all packets"
+	for a in $(cat ${iptables_proc}) ; do
+		${iptables_bin} -F -t $a
+		${iptables_bin} -X -t $a
+
+		set_table_policy $a DROP
+	done
+	eend $?
+}
diff --git a/pcr/openrc-net/iptables-1.4.13.confd b/pcr/openrc-net/iptables-1.4.13.confd
new file mode 100644
index 000000000..7225374c3
--- /dev/null
+++ b/pcr/openrc-net/iptables-1.4.13.confd
@@ -0,0 +1,19 @@
+# /etc/conf.d/iptables
+
+# Location in which iptables initscript will save set rules on 
+# service shutdown
+IPTABLES_SAVE="/var/lib/iptables/rules-save"
+
+# Options to pass to iptables-save and iptables-restore 
+SAVE_RESTORE_OPTIONS="-c"
+
+# Save state on stopping iptables
+SAVE_ON_STOP="yes"
+
+# If you need to log iptables messages as soon as iptables starts,
+# AND your logger does NOT depend on the network, then you may wish
+# to uncomment the next line.
+# If your logger depends on the network, and you uncomment this line
+# you will create an unresolvable circular dependency during startup.
+# After commenting or uncommenting this line, you must run 'rc-update -u'.
+#rc_use="logger"
diff --git a/pcr/openrc-net/lighttpd.confd b/pcr/openrc-net/lighttpd.confd
new file mode 100644
index 000000000..f3afb07a5
--- /dev/null
+++ b/pcr/openrc-net/lighttpd.confd
@@ -0,0 +1,12 @@
+# /etc/conf.d/lighttpd
+
+# Location of a shell used by the 'include_shell' directive
+# in the lighttpd's configuration file
+#export SHELL="/bin/bash"
+
+# Location of the lighttpd configuration file
+LIGHTTPD_CONF="/etc/lighttpd/lighttpd.conf"
+
+# Location of the lighttpd pid file
+LIGHTTPD_PID="$(/usr/bin/awk '/^server.pid-file/{s=$3};{sub("\"","",s)};END{print s}' ${LIGHTTPD_CONF})"
+
diff --git a/pcr/openrc-net/lighttpd.initd b/pcr/openrc-net/lighttpd.initd
new file mode 100644
index 000000000..43626c026
--- /dev/null
+++ b/pcr/openrc-net/lighttpd.initd
@@ -0,0 +1,73 @@
+#!/sbin/runscript
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/www-servers/lighttpd/files/lighttpd.initd,v 1.22 2013/02/06 19:36:51 hwoarang Exp $
+
+extra_started_commands="reload graceful"
+
+depend() {
+	need net
+	use mysql logger spawn-fcgi ldap slapd netmount dns
+	after famd
+	after sshd
+}
+
+checkconfig() {
+	if [ ! -f "${LIGHTTPD_CONF}" ] ; then
+		ewarn "${LIGHTTPD_CONF} does not exist."
+		return 1
+	fi
+
+	if [ -z "${LIGHTTPD_PID}" ] ; then
+		ewarn "server.pid-file variable in ${LIGHTTPD_CONF}"
+		ewarn "is not set. Falling back to lighttpd.pid"
+		LIGHTTPD_PID="/run/lighttpd.pid"
+	fi
+	/usr/sbin/lighttpd -t -f ${LIGHTTPD_CONF} >/dev/null
+}
+
+start() {
+	checkconfig || return 1
+	checkpath -d -q -m 0750 -o lighttpd:lighttpd /run/lighttpd/
+
+	ebegin "Starting lighttpd"
+	start-stop-daemon --start --quiet --exec /usr/sbin/lighttpd \
+		--pidfile "${LIGHTTPD_PID}" -- -f "${LIGHTTPD_CONF}"
+	eend $?
+}
+
+stop() {
+	local rv=0
+	ebegin "Stopping lighttpd"
+	start-stop-daemon --stop --quiet --pidfile "${LIGHTTPD_PID}"
+	eend $?
+}
+
+reload() {
+	if ! service_started "${SVCNAME}" ; then
+		eerror "${SVCNAME} isn't running"
+		return 1
+	fi
+	checkconfig || return 1
+
+	ebegin "Re-opening lighttpd log files"
+	start-stop-daemon --quiet --pidfile "${LIGHTTPD_PID}" \
+		--signal HUP
+	eend $?
+}
+
+graceful() {
+	if ! service_started "${SVCNAME}" ; then
+		eerror "${SVCNAME} isn't running"
+		return 1
+	fi
+	checkconfig || return 1
+
+	ebegin "Gracefully stopping lighttpd"
+	start-stop-daemon --quiet --pidfile "${LIGHTTPD_PID}" \
+		--signal INT
+	if eend $? ; then
+		rm -f "${LIGHTTPD_PID}"
+		start
+	fi
+}
diff --git a/pcr/openrc-net/mit-krb5kadmind.initd-r1 b/pcr/openrc-net/mit-krb5kadmind.initd-r1
new file mode 100644
index 000000000..7b28fb2ae
--- /dev/null
+++ b/pcr/openrc-net/mit-krb5kadmind.initd-r1
@@ -0,0 +1,25 @@
+#!/sbin/runscript
+
+#---------------------------------------------------------------------------
+# This script starts/stops the MIT Kerberos 5 Admin daemon
+#---------------------------------------------------------------------------
+
+daemon="MIT Kerberos 5 Admin daemon"
+exec="/usr/sbin/kadmind"
+
+depend() {
+	need mit-krb5kdc
+	use net
+}
+
+start() {
+	ebegin "Starting $daemon"
+	start-stop-daemon --start --quiet --exec ${exec} 1>&2
+	eend $? "Error starting $daemon"
+}
+
+stop() {
+	ebegin "Stopping $daemon"
+	start-stop-daemon --stop --quiet --exec ${exec} 1>&2
+	eend $? "Error stopping $daemon"
+}
diff --git a/pcr/openrc-net/mit-krb5kdc.initd-r1 b/pcr/openrc-net/mit-krb5kdc.initd-r1
new file mode 100644
index 000000000..94f1f7937
--- /dev/null
+++ b/pcr/openrc-net/mit-krb5kdc.initd-r1
@@ -0,0 +1,24 @@
+#!/sbin/runscript
+
+#---------------------------------------------------------------------------
+# This script starts/stops the MIT Kerberos 5 KDC
+#---------------------------------------------------------------------------
+
+daemon="MIT Kerberos 5 KDC"
+exec="/usr/sbin/krb5kdc"
+
+depend() {
+	use net
+}
+
+start() {
+	ebegin "Starting $daemon"
+	start-stop-daemon --start --quiet --exec ${exec} 1>&2
+	eend $? "Error starting $daemon"
+}
+
+stop() {
+	ebegin "Stopping $daemon"
+	start-stop-daemon --stop --quiet --exec ${exec} 1>&2
+	eend $? "Error stopping $daemon"
+}
diff --git a/pcr/openrc-net/mit-krb5kpropd.initd-r1 b/pcr/openrc-net/mit-krb5kpropd.initd-r1
new file mode 100644
index 000000000..d800d666a
--- /dev/null
+++ b/pcr/openrc-net/mit-krb5kpropd.initd-r1
@@ -0,0 +1,24 @@
+#!/sbin/runscript
+
+#---------------------------------------------------------------------------
+# This script starts/stops the MIT Kerberos 5 kpropd
+#---------------------------------------------------------------------------
+
+daemon="MIT Kerberos 5 kpropd"
+exec="/usr/sbin/kpropd"
+
+depend() {
+	use net mit-krb5kdc mit-krb5kadmind
+}
+
+start() {
+	ebegin "Starting $daemon"
+	start-stop-daemon --start --quiet --exec ${exec} -- -S 1>&2
+	eend $? "Error starting $daemon"
+}
+
+stop() {
+	ebegin "Stopping $daemon"
+	start-stop-daemon --stop --quiet --exec ${exec} 1>&2
+	eend $? "Error stopping $daemon"
+}
diff --git a/pcr/openrc-net/nfs.confd b/pcr/openrc-net/nfs.confd
new file mode 100644
index 000000000..9dc14058c
--- /dev/null
+++ b/pcr/openrc-net/nfs.confd
@@ -0,0 +1,38 @@
+# /etc/conf.d/nfs
+
+# If you wish to set the port numbers for lockd,
+# please see /etc/sysctl.conf
+
+# Optional services to include in default `/etc/init.d/nfs start`
+# For NFSv4 users, you'll want to add "rpc.idmapd" here.
+NFS_NEEDED_SERVICES=""
+
+# Options to pass to rpc.nfsd
+OPTS_RPC_NFSD="8"
+
+# Options to pass to rpc.mountd
+# ex. OPTS_RPC_MOUNTD="-p 32767"
+OPTS_RPC_MOUNTD=""
+
+# Options to pass to rpc.statd
+# ex. OPTS_RPC_STATD="-p 32765 -o 32766"
+OPTS_RPC_STATD=""
+
+# Options to pass to rpc.idmapd
+OPTS_RPC_IDMAPD=""
+
+# Options to pass to rpc.gssd
+OPTS_RPC_GSSD=""
+
+# Options to pass to rpc.svcgssd
+OPTS_RPC_SVCGSSD=""
+
+# Options to pass to rpc.rquotad (requires sys-fs/quota)
+OPTS_RPC_RQUOTAD=""
+
+# Timeout (in seconds) for exportfs
+EXPORTFS_TIMEOUT=30
+
+# Options to set in the nfsd filesystem (/proc/fs/nfsd/).
+# Format is <option>=<value>.  Multiple options are allowed.
+#OPTS_NFSD="nfsv4leasetime=30 max_block_size=4096"
diff --git a/pcr/openrc-net/nfs.initd b/pcr/openrc-net/nfs.initd
new file mode 100644
index 000000000..e4239b70c
--- /dev/null
+++ b/pcr/openrc-net/nfs.initd
@@ -0,0 +1,163 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/nfs-utils/files/nfs.initd,v 1.28 2014/06/20 06:21:22 vapier Exp $
+
+extra_started_commands="reload"
+
+# This variable is used for controlling whether or not to run exportfs -ua;
+# see stop() for more information
+restarting=no
+
+# The binary locations
+exportfs=/usr/sbin/exportfs
+  mountd=/usr/sbin/rpc.mountd
+    nfsd=/usr/sbin/rpc.nfsd
+smnotify=/usr/sbin/sm-notify
+
+depend() {
+	local myneed=""
+	# XXX: no way to detect NFSv4 is desired and so need rpc.idmapd
+	myneed="${myneed} $(
+		awk '!/^[[:space:]]*#/ {
+			# clear the path to avoid spurious matches
+			$1 = "";
+			if ($0 ~ /[(][^)]*sec=(krb|spkm)[^)]*[)]/) {
+				print "rpc.svcgssd"
+				exit 0
+			}
+		}' /etc/exports /etc/exports.d/*.exports 2>/dev/null
+	)"
+	config /etc/exports /etc/exports.d/*.exports
+	need portmap rpc.statd ${myneed} ${NFS_NEEDED_SERVICES}
+	use ypbind net dns rpc.rquotad rpc.idmapd rpc.svcgssd
+	after quota
+}
+
+mkdir_nfsdirs() {
+	local d
+	for d in v4recovery v4root ; do
+		d="/var/lib/nfs/${d}"
+		[ ! -d "${d}" ] && mkdir -p "${d}"
+	done
+}
+
+waitfor_exportfs() {
+	local pid=$1
+	( sleep ${EXPORTFS_TIMEOUT:-30}; kill -9 ${pid} 2>/dev/null ) &
+	wait $1
+}
+
+mount_nfsd() {
+	if [ -e /proc/modules ] ; then
+		# Make sure nfs support is loaded in the kernel #64709
+		if ! grep -qs nfsd /proc/filesystems ; then
+			modprobe -q nfsd
+		fi
+		# Restart idmapd if needed #220747
+		if grep -qs nfsd /proc/modules ; then
+			killall -q -HUP rpc.idmapd
+		fi
+	fi
+
+	# This is the new "kernel 2.6 way" to handle the exports file
+	if grep -qs nfsd /proc/filesystems ; then
+		if ! mountinfo -q /proc/fs/nfsd ; then
+			ebegin "Mounting nfsd filesystem in /proc"
+			mount -t nfsd -o nodev,noexec,nosuid nfsd /proc/fs/nfsd
+			eend $?
+		fi
+
+		local o
+		for o in ${OPTS_NFSD} ; do
+			echo "${o#*=}" > "/proc/fs/nfsd/${o%%=*}"
+		done
+	fi
+}
+
+start_it() {
+	ebegin "Starting NFS $1"
+	shift
+	"$@"
+	eend $?
+	ret=$((ret + $?))
+}
+start() {
+	mount_nfsd
+	mkdir_nfsdirs
+
+	# Exportfs likes to hang if networking isn't working.
+	# If that's the case, then try to kill it so the
+	# bootup process can continue.
+	if grep -qs '^[[:space:]]*/' /etc/exports /etc/exports.d/*.exports ; then
+		ebegin "Exporting NFS directories"
+		${exportfs} -r &
+		waitfor_exportfs $!
+		eend $?
+	fi
+
+	local ret=0
+	start_it mountd ${mountd} ${OPTS_RPC_MOUNTD}
+	start_it daemon ${nfsd} ${OPTS_RPC_NFSD}
+	[ -x "${smnotify}" ] && start_it smnotify ${smnotify} ${OPTS_SMNOTIFY}
+	return ${ret}
+}
+
+stop() {
+	local ret=0
+
+	ebegin "Stopping NFS mountd"
+	start-stop-daemon --stop --exec ${mountd}
+	eend $?
+	ret=$((ret + $?))
+
+	# nfsd sets its process name to [nfsd] so don't look for $nfsd
+	ebegin "Stopping NFS daemon"
+	start-stop-daemon --stop --name nfsd --user root --signal 2
+	eend $?
+	ret=$((ret + $?))
+	# in case things don't work out ... #228127
+	rpc.nfsd 0
+
+	# When restarting the NFS server, running "exportfs -ua" probably
+	# isn't what the user wants.  Running it causes all entries listed
+	# in xtab to be removed from the kernel export tables, and the
+	# xtab file is cleared. This effectively shuts down all NFS
+	# activity, leaving all clients holding stale NFS filehandles,
+	# *even* when the NFS server has restarted.
+	#
+	# That's what you would want if you were shutting down the NFS
+	# server for good, or for a long period of time, but not when the
+	# NFS server will be running again in short order.  In this case,
+	# then "exportfs -r" will reread the xtab, and all the current
+	# clients will be able to resume NFS activity, *without* needing
+	# to umount/(re)mount the filesystem.
+	if [ "${restarting}" = no -o "${RC_CMD}" = "restart" ] ; then
+		ebegin "Unexporting NFS directories"
+		# Exportfs likes to hang if networking isn't working.
+		# If that's the case, then try to kill it so the
+		# shutdown process can continue.
+		${exportfs} -ua &
+		waitfor_exportfs $!
+		eend $?
+	fi
+
+	return ${ret}
+}
+
+reload() {
+	# Exportfs likes to hang if networking isn't working.
+	# If that's the case, then try to kill it so the
+	# bootup process can continue.
+	ebegin "Reloading /etc/exports"
+	${exportfs} -r 1>&2 &
+	waitfor_exportfs $!
+	eend $?
+}
+
+restart() {
+	# See long comment in stop() regarding "restarting" and exportfs -ua
+	restarting=yes
+	svc_stop
+	svc_start
+}
diff --git a/pcr/openrc-net/nfsclient.confd b/pcr/openrc-net/nfsclient.confd
new file mode 100644
index 000000000..8a995571e
--- /dev/null
+++ b/pcr/openrc-net/nfsclient.confd
@@ -0,0 +1,18 @@
+# You need to decide which nfs protocol version you want to use.
+# If you are unsure, leave these alone.
+#
+# If you are using only nfsv4, uncomment this line:
+#
+#rc_need="!rpc.statd"
+#
+# If you are using only nfsv3, uncomment this line:
+#
+#rc_need="!rpc.idmapd"
+# 
+# You will need to set the dependencies in the nfsclient script to match
+# the network configuration tools you are using. This should be done in
+# this file by following the examples below, and not by changing the
+# service script itself.  See /etc/conf.d/netmount for more examples.
+#
+# This is a safe default.
+rc_after="net"
diff --git a/pcr/openrc-net/nfsclient.initd b/pcr/openrc-net/nfsclient.initd
new file mode 100644
index 000000000..72ba9a963
--- /dev/null
+++ b/pcr/openrc-net/nfsclient.initd
@@ -0,0 +1,34 @@
+#!/sbin/runscript
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/nfs-utils/files/nfsclient.initd,v 1.5 2015/02/05 04:32:41 williamh Exp $
+
+[ -e /etc/conf.d/nfs ] && . /etc/conf.d/nfs
+
+depend() {
+	local opts myneed=""
+	if [ -e /etc/fstab ] ; then
+		for opts in $(fstabinfo -o -t nfs,nfs4) ; do
+			case $opts in
+				*sec=krb*|*sec=spkm*) myneed="$myneed rpc.gssd" ;;
+			esac
+		done
+	fi
+	config /etc/fstab
+	need portmap rpc.statd rpc.idmapd ${myneed}
+	use ypbind dns
+}
+
+start() {
+	if [ -x /usr/sbin/sm-notify ] ; then
+		ebegin "Starting NFS sm-notify"
+		/usr/sbin/sm-notify ${OPTS_SMNOTIFY}
+		eend $?
+	fi
+
+	# Make sure nfs support is loaded in the kernel #64709
+	if [ -e /proc/modules ] && ! grep -qs 'nfs$' /proc/filesystems ; then
+		modprobe -q nfs
+	fi
+	return 0
+}
diff --git a/pcr/openrc-net/nginx.initd-r2 b/pcr/openrc-net/nginx.initd-r2
new file mode 100644
index 000000000..903670955
--- /dev/null
+++ b/pcr/openrc-net/nginx.initd-r2
@@ -0,0 +1,89 @@
+#!/sbin/runscript
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/www-servers/nginx/files/nginx.initd-r2,v 1.1 2013/05/13 12:18:11 dev-zero Exp $
+
+extra_commands="configtest"
+extra_started_commands="upgrade reload"
+
+description="Robust, small and high performance http and reverse proxy server"
+description_configtest="Run nginx' internal config check."
+description_upgrade="Upgrade the nginx binary without losing connections."
+description_reload="Reload the nginx configuration without losing connections."
+
+nginx_config=${nginx_config:-/etc/nginx/nginx.conf}
+
+command="/usr/sbin/nginx"
+command_args="-c ${nginx_config}"
+pidfile=${pidfile:-/run/nginx.pid}
+user=${user:-nginx}
+group=${group:-nginx}
+
+depend() {
+	need net
+	use dns logger netmount
+}
+
+start_pre() {
+	if [ "${RC_CMD}" != "restart" ]; then
+		configtest || return 1
+	fi
+}
+
+stop_pre() {
+	if [ "${RC_CMD}" = "restart" ]; then
+		configtest || return 1
+	fi
+}
+
+stop_post() {
+	rm -f ${pidfile}
+}
+
+reload() {
+	configtest || return 1
+	ebegin "Refreshing nginx' configuration"
+	kill -HUP `cat ${pidfile}` &>/dev/null
+	eend $? "Failed to reload nginx"
+}
+
+upgrade() {
+	configtest || return 1
+	ebegin "Upgrading nginx"
+
+	einfo "Sending USR2 to old binary"
+	kill -USR2 `cat ${pidfile}` &>/dev/null
+
+	einfo "Sleeping 3 seconds before pid-files checking"
+	sleep 3
+
+	if [ ! -f ${pidfile}.oldbin ]; then
+		eerror "File with old pid not found"
+		return 1
+	fi
+
+	if [ ! -f ${pidfile} ]; then
+		eerror "New binary failed to start"
+		return 1
+	fi
+
+	einfo "Sleeping 3 seconds before WINCH"
+	sleep 3 ; kill -WINCH `cat ${pidfile}.oldbin`
+
+	einfo "Sending QUIT to old binary"
+	kill -QUIT `cat ${pidfile}.oldbin`
+
+	einfo "Upgrade completed"
+	eend $? "Upgrade failed"
+}
+
+configtest() {
+	ebegin "Checking nginx' configuration"
+	${command} -c ${nginx_config} -t -q
+
+	if [ $? -ne 0 ]; then
+		${command} -c ${nginx_config} -t
+	fi
+
+	eend $? "failed, please correct errors above"
+}
diff --git a/pcr/openrc-net/openntpd.conf.d-20080406-r6 b/pcr/openrc-net/openntpd.conf.d-20080406-r6
new file mode 100644
index 000000000..ccd454596
--- /dev/null
+++ b/pcr/openrc-net/openntpd.conf.d-20080406-r6
@@ -0,0 +1,7 @@
+# /etc/conf.d/ntpd: config file for openntpd's ntpd
+
+# See ntpd(8) man page ... some popular options:
+#  -s   Set the time immediately at startup
+#       (Note: may cause up to a 15 second startup delay
+#        if ntp servers not reachable)
+NTPD_OPTS=""
diff --git a/pcr/openrc-net/openntpd.init.d-20080406-r6 b/pcr/openrc-net/openntpd.init.d-20080406-r6
new file mode 100644
index 000000000..2f452e0fd
--- /dev/null
+++ b/pcr/openrc-net/openntpd.init.d-20080406-r6
@@ -0,0 +1,15 @@
+#!/sbin/runscript
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-misc/openntpd/files/openntpd.init.d-20080406-r6,v 1.1 2013/12/02 13:32:12 ottxor Exp $
+
+name="OpenNTPD"
+command="/usr/sbin/ntpd"
+pidfile="/run/ntpd.pid"
+command_args="-p ${pidfile} ${NTPD_OPTS}"
+
+depend() {
+	need net
+	after ntp-client
+	use dns logger
+}
diff --git a/pcr/openrc-net/openvpn-2.1.conf b/pcr/openrc-net/openvpn-2.1.conf
new file mode 100644
index 000000000..72510c34a
--- /dev/null
+++ b/pcr/openrc-net/openvpn-2.1.conf
@@ -0,0 +1,18 @@
+# OpenVPN automatically creates an /etc/resolv.conf (or sends it to
+# resolvconf) if given DNS information by the OpenVPN server.
+# Set PEER_DNS="no" to stop this.
+PEER_DNS="yes"
+
+# OpenVPN can run in many modes. Most people will want the init script
+# to automatically detect the mode and try and apply a good default
+# configuration and setup scripts. However, there are cases where the
+# OpenVPN configuration looks like a client, but it's really a peer or
+# something else. DETECT_CLIENT controls this behaviour.
+DETECT_CLIENT="yes"
+
+# If DETECT_CLIENT is no and you have your own scripts to re-enter the openvpn
+# init script (ie, it first becomes "inactive" and the script then starts the
+# script again to make it "started") then you can state this below.
+# In other words, unless you understand service dependencies and are a
+# competent shell scripter, don't set this.
+RE_ENTER="no"
diff --git a/pcr/openrc-net/openvpn-2.1.init b/pcr/openrc-net/openvpn-2.1.init
new file mode 100644
index 000000000..d65e6f8bd
--- /dev/null
+++ b/pcr/openrc-net/openvpn-2.1.init
@@ -0,0 +1,133 @@
+#!/sbin/runscript
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+VPNDIR=${VPNDIR:-/etc/openvpn}
+VPN=${SVCNAME#*.}
+if [ -n "${VPN}" ] && [ ${SVCNAME} != "openvpn" ]; then
+	VPNPID="/var/run/openvpn.${VPN}.pid"
+else
+	VPNPID="/var/run/openvpn.pid"
+fi
+VPNCONF="${VPNDIR}/${VPN}.conf"
+
+depend() {
+	need localmount net
+	use dns
+	after bootmisc
+}
+
+checkconfig() {
+	# Linux has good dynamic tun/tap creation
+	if [ $(uname -s) = "Linux" ] ; then
+		if [ ! -e /dev/net/tun ]; then
+			if ! modprobe tun ; then
+				eerror "TUN/TAP support is not available" \
+					"in this kernel"
+				return 1
+			fi
+		fi
+		if [ -h /dev/net/tun ] && [ -c /dev/misc/net/tun ]; then
+			ebegin "Detected broken /dev/net/tun symlink, fixing..."
+			rm -f /dev/net/tun
+			ln -s /dev/misc/net/tun /dev/net/tun
+			eend $?
+		fi
+		return 0
+	fi
+
+	# Other OS's don't, so we rely on a pre-configured interface
+	# per vpn instance
+	local ifname=$(sed -n -e 's/[[:space:]]*dev[[:space:]][[:space:]]*\([^[:space:]]*\).*/\1/p' "${VPNCONF}")
+	if [ -z ${ifname} ] ; then
+		eerror "You need to specify the interface that this openvpn" \
+			"instance should use" \
+			"by using the dev option in ${VPNCONF}"
+		return 1
+	fi
+
+	if ! ifconfig "${ifname}" >/dev/null 2>/dev/null ; then
+		# Try and create it
+		echo > /dev/"${ifname}" >/dev/null
+	fi
+	if ! ifconfig "${ifname}" >/dev/null 2>/dev/null ; then
+		eerror "${VPNCONF} requires interface ${ifname}" \
+			"but that does not exist"
+		return 1
+	fi
+}
+
+start() {
+	# If we are re-called by the openvpn gentoo-up.sh script
+	# then we don't actually want to start openvpn
+	[ "${IN_BACKGROUND}" = "true" ] && return 0
+	
+	ebegin "Starting ${SVCNAME}"
+
+	checkconfig || return 1
+
+	local args="" reenter=${RE_ENTER:-no}
+	# If the config file does not specify the cd option, we do
+	# But if we specify it, we override the config option which we do not want
+	if ! grep -q "^[ 	]*cd[ 	].*" "${VPNCONF}" ; then
+		args="${args} --cd ${VPNDIR}"
+	fi
+	
+	# We mark the service as inactive and then start it.
+	# When we get an authenticated packet from the peer then we run our script
+	# which configures our DNS if any and marks us as up.
+	if [ "${DETECT_CLIENT:-yes}" = "yes" ] && \
+	grep -q "^[ 	]*remote[ 	].*" "${VPNCONF}" ; then
+		reenter="yes"
+		args="${args} --up-delay --up-restart"
+		args="${args} --script-security 2"
+		args="${args} --up /etc/openvpn/up.sh"
+		args="${args} --down-pre --down /etc/openvpn/down.sh"
+
+		# Warn about setting scripts as we override them
+		if grep -Eq "^[ 	]*(up|down)[ 	].*" "${VPNCONF}" ; then
+			ewarn "WARNING: You have defined your own up/down scripts"
+			ewarn "As you're running as a client, we now force Gentoo specific"
+			ewarn "scripts to be run for up and down events."
+			ewarn "These scripts will call /etc/openvpn/${SVCNAME}-{up,down}.sh"
+			ewarn "where you can put your own code."
+		fi
+
+		# Warn about the inability to change ip/route/dns information when
+		# dropping privs
+		if grep -q "^[ 	]*user[ 	].*" "${VPNCONF}" ; then
+			ewarn "WARNING: You are dropping root privileges!"
+			ewarn "As such openvpn may not be able to change ip, routing"
+			ewarn "or DNS configuration."
+		fi
+	else
+		# So we're a server. Run as openvpn unless otherwise specified
+		grep -q "^[ 	]*user[ 	].*" "${VPNCONF}" || args="${args} --user openvpn"
+		grep -q "^[ 	]*group[ 	].*" "${VPNCONF}" || args="${args} --group openvpn"
+	fi
+
+	# Ensure that our scripts get the PEER_DNS variable
+	[ -n "${PEER_DNS}" ] && args="${args} --setenv PEER_DNS ${PEER_DNS}"
+
+	[ "${reenter}" = "yes" ] && mark_service_inactive "${SVCNAME}"
+	start-stop-daemon --start --exec /usr/sbin/openvpn --pidfile "${VPNPID}" \
+		-- --config "${VPNCONF}" --writepid "${VPNPID}" --daemon \
+		--setenv SVCNAME "${SVCNAME}" ${args}
+	eend $? "Check your logs to see why startup failed"
+}
+
+stop() {
+	# If we are re-called by the openvpn gentoo-down.sh script
+	# then we don't actually want to stop openvpn
+	if [ "${IN_BACKGROUND}" = "true" ] ; then
+		mark_service_inactive "${SVCNAME}"
+		return 0
+	fi
+
+	ebegin "Stopping ${SVCNAME}"
+	start-stop-daemon --stop --quiet \
+		--exec /usr/sbin/openvpn --pidfile "${VPNPID}"
+	eend $?
+}
+
+# vim: set ts=4 :
diff --git a/pcr/openrc-net/polipo.initd b/pcr/openrc-net/polipo.initd
new file mode 100644
index 000000000..9074050c2
--- /dev/null
+++ b/pcr/openrc-net/polipo.initd
@@ -0,0 +1,54 @@
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-proxy/polipo/files/Attic/polipo.initd,v 1.7 2015/01/12 16:16:12 bircoph dead $
+
+depend() {
+	need net
+}
+
+checkconfig() {
+	{ polipo -v || return 1 ; } | {
+		local retvalue=0
+		local name type value desc
+		while read name type value desc ; do
+			case ${name} in
+				configFile)
+					if [ "${value}" = "(none)" ] ; then
+						eerror "Unable to read configuration file /etc/polipo/config"
+						retvalue=1
+					fi
+					;;
+				daemonise)
+					if [ "${value}" != "false" ] ; then
+						eerror "Configuration option not supported by this init script: ${name}=${value}"
+						retvalue=1
+					fi
+					;;
+				pidFile)
+					if [ "${value}" != "(none)" ] ; then
+						eerror "Configuration option not supported by this init script: ${name}=${value}"
+						retvalue=1
+					fi
+					;;
+			esac
+		done
+		return ${retvalue}
+	}
+}
+
+start() {
+	checkconfig || return 1
+
+	ebegin "Starting Polipo HTTP proxy"
+	start-stop-daemon --start --user polipo \
+		--background --pidfile /var/run/polipo.pid --make-pidfile \
+			--exec /usr/bin/polipo
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping Polipo HTTP proxy"
+	start-stop-daemon --stop --pidfile /var/run/polipo.pid
+	eend $?
+}
diff --git a/pcr/openrc-net/postfix.rc6.2.7 b/pcr/openrc-net/postfix.rc6.2.7
new file mode 100644
index 000000000..aecd8e71f
--- /dev/null
+++ b/pcr/openrc-net/postfix.rc6.2.7
@@ -0,0 +1,86 @@
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/mail-mta/postfix/files/postfix.rc6.2.7,v 1.2 2012/03/07 10:27:37 eras Exp $
+
+extra_started_commands="reload abort flush"
+
+description_reload="Re-read configuration files. Running processes terminate at their earliest convenience."
+description_abort="Stop the Postfix mail system abruptly. Running processes are signaled to stop immediately."
+description_flush="Force delivery: attempt to deliver every message in the deferred mail queue."
+
+# Please read http://www.postfix.org/MULTI_INSTANCE_README.html for multi instance support
+CONF_DIR="/etc/postfix"
+CONF_OPT="${SVCNAME##*.}"
+if [ -n ${CONF_OPT} -a ${SVCNAME} != "postfix" ]; then
+	CONF_DIR="${CONF_DIR}.${CONF_OPT}"
+fi
+if [ "${CONF_DIR}" = "/etc/postfix" ]; then
+	CONF_PARAM=""
+	CONF_MESSAGE=""
+else
+	CONF_PARAM="-c ${CONF_DIR}"
+	CONF_MESSAGE="(${CONF_DIR})"
+fi
+
+depend() {
+	use logger dns ypbind amavisd antivirus postfix_greylist net saslauthd
+	if [ "${SVCNAME}" = "postfix" ]; then
+		provide mta
+	fi
+}
+
+start() {
+	if [ ! -z "${CONF_PARAM}" ]; then
+		einfo "Please consider updating your config for postmulti support."
+	fi
+	ebegin "Starting postfix ${CONF_MESSAGE}"
+	if [ ! -d ${CONF_DIR} ]; then
+		eend 1 "${CONF_DIR} does not exist"
+		return 1
+	fi
+	/usr/sbin/postfix ${CONF_PARAM} start >/dev/null 2>&1
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping postfix ${CONF_MESSAGE}"
+	/usr/sbin/postfix ${CONF_PARAM} stop >/dev/null 2>&1
+	eend
+}
+
+status() {
+	local _retval
+	einfon ""
+	/usr/sbin/postfix ${CONF_PARAM} status
+	_retval=$?
+	if [ x${_retval} = 'x0' ]; then
+		mark_service_started "${SVCNAME}"
+		eend 0
+	else
+		mark_service_stopped "${SVCNAME}"
+		eend 3
+	fi
+}
+
+reload() {
+	ebegin "Reloading postfix ${CONF_MESSAGE}"
+	/usr/sbin/postfix ${CONF_PARAM} reload >/dev/null 2>&1
+	eend $?
+}
+
+abort() {
+	ebegin "Aborting postfix ${CONF_MESSAGE}"
+
+	if service_started "${SVCNAME}"; then
+		mark_service_stopped "${SVCNAME}"
+	fi
+	/usr/sbin/postfix ${CONF_PARAM} abort >/dev/null 2>&1
+	eend $?
+}
+
+flush() {
+	ebegin "Flushing postfix ${CONF_MESSAGE}"
+	/usr/sbin/postfix ${CONF_PARAM} flush >/dev/null 2>&1
+	eend $?
+}
diff --git a/pcr/openrc-net/privoxy.initd b/pcr/openrc-net/privoxy.initd
new file mode 100644
index 000000000..84d6186d9
--- /dev/null
+++ b/pcr/openrc-net/privoxy.initd
@@ -0,0 +1,29 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-proxy/privoxy/files/privoxy.initd,v 1.2 2007/11/14 05:14:56 mrness Exp $
+
+CONFFILE=/etc/${SVCNAME}/config
+PIDFILE=/var/run/${SVCNAME}.pid
+
+depend() {
+	need net
+}
+
+start() {
+	if [ ! -f "${CONFFILE}" ]; then
+		eerror "Configuration file ${CONFFILE} not found!"
+		return 1
+	fi
+
+	ebegin "Starting privoxy"
+	start-stop-daemon --start --quiet --exec /usr/sbin/privoxy --pidfile "${PIDFILE}" \
+		-- --pidfile "${PIDFILE}" --user privoxy.privoxy "${CONFFILE}" #2>/dev/null
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping privoxy"
+	start-stop-daemon --stop --quiet --pidfile "${PIDFILE}"
+	eend $?
+}
diff --git a/pcr/openrc-net/quota.confd b/pcr/openrc-net/quota.confd
new file mode 100644
index 000000000..6e66c88dd
--- /dev/null
+++ b/pcr/openrc-net/quota.confd
@@ -0,0 +1,20 @@
+# /etc/conf.d/quota: config file for /etc/init.d/quota
+
+# Note: if your console is hooked up to a serial terminal,
+# you prob want to drop the '-v' from the OPTS vars below.
+
+
+# Run quotacheck ?
+RUN_QUOTACHECK="yes"
+
+
+# Options for quotacheck
+QUOTACHECK_OPTS="-avug"
+
+
+# Options for quotaon
+QUOTAON_OPTS="-avug"
+
+
+# Options for quotaoff
+QUOTAOFF_OPTS="-avug"
diff --git a/pcr/openrc-net/quota.rc7 b/pcr/openrc-net/quota.rc7
new file mode 100644
index 000000000..23f8c1536
--- /dev/null
+++ b/pcr/openrc-net/quota.rc7
@@ -0,0 +1,38 @@
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License, v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/quota/files/quota.rc7,v 1.2 2012/12/08 19:50:27 vapier Exp $
+
+extra_started_commands="check"
+description_check="Running quotacheck with quota being offline"
+
+depend() {
+	need localmount
+	use portmap
+}
+
+start() {
+	if [ "${RUN_QUOTACHECK}" = "yes" ] ; then
+		ebegin "Checking quotas (may take a while)"
+		quotacheck ${QUOTACHECK_OPTS}
+		eend $?
+	fi
+
+	ebegin "Starting quota"
+	quotaon ${QUOTAON_OPTS}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping quota"
+	quotaoff ${QUOTAOFF_OPTS}
+	eend $?
+}
+
+check() {
+	ebegin "Checking quota"
+	quotaoff ${QUOTAOFF_OPTS} && \
+	quotacheck ${QUOTACHECK_OPTS} && \
+	quotaon ${QUOTAON_OPTS}
+	eend $?
+}
diff --git a/pcr/openrc-net/rpc.gssd.initd b/pcr/openrc-net/rpc.gssd.initd
new file mode 100644
index 000000000..f1b8f8774
--- /dev/null
+++ b/pcr/openrc-net/rpc.gssd.initd
@@ -0,0 +1,24 @@
+#!/sbin/runscript
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/nfs-utils/files/rpc.gssd.initd,v 1.11 2008/10/26 09:02:47 vapier Exp $
+
+[ -e /etc/conf.d/nfs ] && . /etc/conf.d/nfs
+
+depend() {
+	use ypbind net
+	need portmap rpc.pipefs
+	after quota
+}
+
+start() {
+	ebegin "Starting gssd"
+	start-stop-daemon --start --exec /usr/sbin/rpc.gssd -- ${OPTS_RPC_GSSD}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping gssd"
+	start-stop-daemon --stop --exec /usr/sbin/rpc.gssd
+	eend $?
+}
diff --git a/pcr/openrc-net/rpc.idmapd.initd b/pcr/openrc-net/rpc.idmapd.initd
new file mode 100644
index 000000000..52838b5da
--- /dev/null
+++ b/pcr/openrc-net/rpc.idmapd.initd
@@ -0,0 +1,26 @@
+#!/sbin/runscript
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/nfs-utils/files/rpc.idmapd.initd,v 1.8 2009/03/14 18:43:18 vapier Exp $
+
+[ -e /etc/conf.d/nfs ] && . /etc/conf.d/nfs
+
+rpc_bin=/usr/sbin/rpc.idmapd
+
+depend() {
+	use ypbind net
+	need portmap rpc.pipefs
+	after quota
+}
+
+start() {
+	ebegin "Starting idmapd"
+	${rpc_bin} ${OPTS_RPC_IDMAPD}
+	eend $? "make sure DNOTIFY support is enabled ..."
+}
+
+stop() {
+	ebegin "Stopping idmapd"
+	start-stop-daemon --stop --exec ${rpc_bin}
+	eend $?
+}
diff --git a/pcr/openrc-net/rpc.pipefs.initd b/pcr/openrc-net/rpc.pipefs.initd
new file mode 100644
index 000000000..ebae3b915
--- /dev/null
+++ b/pcr/openrc-net/rpc.pipefs.initd
@@ -0,0 +1,33 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/nfs-utils/files/rpc.pipefs.initd,v 1.3 2014/06/20 04:33:57 vapier Exp $
+
+MNT="/var/lib/nfs/rpc_pipefs"
+
+mount_pipefs() {
+	local fstype=rpc_pipefs
+
+	# if things are already mounted, nothing to do
+	mountinfo -q ${MNT} && return 0
+
+	# if rpc_pipefs is not available, try to load sunrpc for it #219566
+	grep -qs ${fstype} /proc/filesystems || modprobe -q sunrpc
+	# if still not available, the `mount` will issue an error for the user
+
+	# now just do it for kicks
+	mkdir -p ${MNT}
+	mount -t ${fstype} ${fstype} ${MNT}
+}
+
+start() {
+	ebegin "Setting up RPC pipefs"
+	mount_pipefs
+	eend $? "make sure you have NFS/SUNRPC enabled in your kernel"
+}
+
+stop() {
+	ebegin "Unmounting RPC pipefs"
+	umount ${MNT}
+	eend $?
+}
diff --git a/pcr/openrc-net/rpc.rquotad.initd b/pcr/openrc-net/rpc.rquotad.initd
new file mode 100644
index 000000000..f657fc469
--- /dev/null
+++ b/pcr/openrc-net/rpc.rquotad.initd
@@ -0,0 +1,26 @@
+#!/sbin/runscript
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/quota/files/rpc.rquotad.initd,v 1.1 2007/03/25 12:09:39 vapier Exp $
+
+[ -e /etc/conf.d/nfs ] && source /etc/conf.d/nfs
+
+rpc_bin=/usr/sbin/rpc.rquotad
+
+depend() {
+	use ypbind net
+	need portmap
+	after quota
+}
+
+start() {
+	ebegin "Starting rpc.rquotad"
+	${rpc_bin} ${OPTS_RPC_RQUOTAD}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping rpc.rquotad"
+	start-stop-daemon --stop --quiet --exec ${rpc_bin}
+	eend $?
+}
diff --git a/pcr/openrc-net/rpc.statd.initd b/pcr/openrc-net/rpc.statd.initd
new file mode 100644
index 000000000..c82041a4d
--- /dev/null
+++ b/pcr/openrc-net/rpc.statd.initd
@@ -0,0 +1,33 @@
+#!/sbin/runscript
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/nfs-utils/files/rpc.statd.initd,v 1.9 2015/02/02 13:47:41 radhermit Exp $
+
+[ -e /etc/conf.d/nfs ] && . /etc/conf.d/nfs
+
+rpc_bin=/sbin/rpc.statd
+rpc_pid=/var/run/rpc.statd.pid
+
+depend() {
+	use ypbind net
+	need portmap
+	after quota
+}
+
+start() {
+	# Don't start rpc.statd if already started by someone else ...
+	# Don't try and kill it if it's already dead ...
+	if killall -q -0 ${rpc_bin} ; then
+		return 0
+	fi
+
+	ebegin "Starting NFS statd"
+	start-stop-daemon --start --exec ${rpc_bin} -- --no-notify ${OPTS_RPC_STATD}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping NFS statd"
+	start-stop-daemon --stop --exec ${rpc_bin} --pidfile /var/run/rpc.statd.pid
+	eend $?
+}
diff --git a/pcr/openrc-net/rpc.svcgssd.initd b/pcr/openrc-net/rpc.svcgssd.initd
new file mode 100644
index 000000000..74383e24d
--- /dev/null
+++ b/pcr/openrc-net/rpc.svcgssd.initd
@@ -0,0 +1,24 @@
+#!/sbin/runscript
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-fs/nfs-utils/files/rpc.svcgssd.initd,v 1.5 2008/10/26 09:02:47 vapier Exp $
+
+[ -e /etc/conf.d/nfs ] && . /etc/conf.d/nfs
+
+depend() {
+	use ypbind net
+	need portmap rpc.pipefs
+	after quota
+}
+
+start() {
+	ebegin "Starting svcgssd"
+	start-stop-daemon --start --exec /usr/sbin/rpc.svcgssd -- ${OPTS_RPC_SVCGSSD}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping svcgssd"
+	start-stop-daemon --stop --exec /usr/sbin/rpc.svcgssd
+	eend $?
+}
diff --git a/pcr/openrc-net/rpc.yppasswdd-r1 b/pcr/openrc-net/rpc.yppasswdd-r1
new file mode 100644
index 000000000..a14762516
--- /dev/null
+++ b/pcr/openrc-net/rpc.yppasswdd-r1
@@ -0,0 +1,22 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-nds/ypserv/files/rpc.yppasswdd-r1,v 1.4 2004/07/24 06:26:28 eradicator Exp $
+
+depend() {
+	need net portmap ypserv
+}
+
+start() {
+	ebegin "Starting rpc.yppasswdd"
+	YOPTS=""
+	if [ -n "${YPPASSWDD_OPTS}" ]; then YOPTS="-- ${YPPASSWDD_OPTS}"; fi
+	start-stop-daemon --start --quiet --exec /usr/sbin/rpc.yppasswdd ${YOPTS}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping rpc.yppasswdd"
+	start-stop-daemon --stop --quiet --exec /usr/sbin/rpc.yppasswdd
+	eend $?
+}
diff --git a/pcr/openrc-net/rpc.yppasswdd.confd b/pcr/openrc-net/rpc.yppasswdd.confd
new file mode 100644
index 000000000..0d6673630
--- /dev/null
+++ b/pcr/openrc-net/rpc.yppasswdd.confd
@@ -0,0 +1,7 @@
+# -e chsh allows changing shell through ypchsh,
+# -e chfn allows changing GECOS ("finger") information through ypchfn,
+# -D <dir> allows specification of directory with yp/NIS sources
+# if other than /etc.
+#YPPASSWDD_OPTS="-e chsh -e chfn -D /var/yp/source"
+
+
diff --git a/pcr/openrc-net/rpc.ypxfrd-2.23 b/pcr/openrc-net/rpc.ypxfrd-2.23
new file mode 100644
index 000000000..b1526aa69
--- /dev/null
+++ b/pcr/openrc-net/rpc.ypxfrd-2.23
@@ -0,0 +1,22 @@
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-nds/ypserv/files/rpc.ypxfrd-2.23,v 1.1 2011/04/21 14:18:40 jer Exp $
+
+depend() {
+	need net portmap ypserv
+}
+
+start() {
+	ebegin "Starting rpc.ypxfrd"
+	YOPTS=""
+	if [ -n "${YPXFRD_OPTS}" ]; then YOPTS="-- ${YPXFRD_OPTS}"; fi
+ 	start-stop-daemon --start --quiet --pidfile /var/run/ypxfrd.pid --exec /usr/sbin/rpc.ypxfrd ${YOPTS}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping rpc.ypxfrd"
+	start-stop-daemon --stop --quiet --pidfile /var/run/ypxfrd.pid --exec /usr/sbin/rpc.ypxfrd
+	eend $?
+}
diff --git a/pcr/openrc-net/rpc.ypxfrd.confd b/pcr/openrc-net/rpc.ypxfrd.confd
new file mode 100644
index 000000000..73cfc47e7
--- /dev/null
+++ b/pcr/openrc-net/rpc.ypxfrd.confd
@@ -0,0 +1,3 @@
+# Command line options to pass to rpc.ypxfrd
+# eg: you can pass --port <number> to use a non-standard port
+YPXFRD_OPTS=""
diff --git a/pcr/openrc-net/rpcbind.initd b/pcr/openrc-net/rpcbind.initd
new file mode 100644
index 000000000..995ca71d0
--- /dev/null
+++ b/pcr/openrc-net/rpcbind.initd
@@ -0,0 +1,22 @@
+#!/sbin/runscript
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-nds/rpcbind/files/rpcbind.initd,v 1.1 2007/12/29 09:13:55 vapier Exp $
+
+depend() {
+	use net
+	before inetd xinetd
+	provide portmap
+}
+
+start() {
+	ebegin "Starting rpcbind"
+	start-stop-daemon --start --quiet --exec /sbin/rpcbind -- ${RPCBIND_OPTS}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping rpcbind"
+	start-stop-daemon --stop --quiet --exec /sbin/rpcbind
+	eend $?
+}
diff --git a/pcr/openrc-net/rsyncd.conf.d b/pcr/openrc-net/rsyncd.conf.d
new file mode 100644
index 000000000..c3d897ed2
--- /dev/null
+++ b/pcr/openrc-net/rsyncd.conf.d
@@ -0,0 +1,5 @@
+# /etc/conf.d/rsyncd: config file for /etc/init.d/rsyncd
+
+# see man pages for rsync or run `rsync --help`
+# for valid cmdline options
+#RSYNC_OPTS=""
diff --git a/pcr/openrc-net/rsyncd.init.d-r1 b/pcr/openrc-net/rsyncd.init.d-r1
new file mode 100644
index 000000000..d2e608e49
--- /dev/null
+++ b/pcr/openrc-net/rsyncd.init.d-r1
@@ -0,0 +1,12 @@
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-misc/rsync/files/rsyncd.init.d-r1,v 1.1 2012/03/22 22:01:21 idl0r Exp $
+
+command="/usr/bin/rsync"
+command_args="--daemon ${RSYNC_OPTS}"
+pidfile="/var/run/${SVCNAME}.pid"
+
+depend() {
+	use net
+}
diff --git a/pcr/openrc-net/samba4.confd b/pcr/openrc-net/samba4.confd
new file mode 100644
index 000000000..58b2c7827
--- /dev/null
+++ b/pcr/openrc-net/samba4.confd
@@ -0,0 +1,38 @@
+# Add "winbind" to the daemon_list if you also want winbind to start.
+# Replace "smbd nmbd" by "samba4" if you want the active directory domain controller part or the ntvfs
+# file server part or the rpc proxy to start.
+# Note that samba4 controls 'smbd' by itself, thus it can't be started manually. You can, however,
+# tweak the behaviour of a samba4-controlled smbd by modifying your '/etc/samba/smb.conf' file
+# accordingly.
+daemon_list="smbd nmbd"
+
+#----------------------------------------------------------------------------
+# Daemons calls: <daemon_name>_<command_option>
+#----------------------------------------------------------------------------
+my_service_name="samba"
+my_service_PRE="unset TMP TMPDIR"
+my_service_POST=""
+
+#----------------------------------------------------------------------------
+# Daemons calls: <daemon_name>_<command_option>
+#----------------------------------------------------------------------------
+smbd_start_options="-D"
+smbd_start="start-stop-daemon --start --exec /usr/sbin/smbd -- ${smbd_start_options}"
+smbd_stop="start-stop-daemon --stop --exec /usr/sbin/smbd"
+smbd_reload="killall -HUP smbd"
+
+nmbd_start_options="-D"
+nmbd_start="start-stop-daemon --start --exec /usr/sbin/nmbd -- ${nmbd_start_options}"
+nmbd_stop="start-stop-daemon --stop --exec /usr/sbin/nmbd"
+nmbd_reload="killall -HUP nmbd"
+
+samba4_start_options=""
+samba4_start="start-stop-daemon --start --exec /usr/sbin/samba -- ${samba4_start_options}"
+samba4_stop="start-stop-daemon --stop --exec /usr/sbin/samba"
+samba4_reload="killall -HUP samba"
+
+winbind_start_options=""
+winbind_start="start-stop-daemon --start --exec /usr/sbin/winbindd -- ${winbind_start_options}"
+winbind_stop="start-stop-daemon --stop --exec /usr/sbin/winbindd"
+winbind_reload="killall -HUP winbindd"
+
diff --git a/pcr/openrc-net/samba4.initd-r1 b/pcr/openrc-net/samba4.initd-r1
new file mode 100644
index 000000000..6401dfbe0
--- /dev/null
+++ b/pcr/openrc-net/samba4.initd-r1
@@ -0,0 +1,56 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License, v2 or later
+# $Header: /var/cvsroot/gentoo-x86/net-fs/samba/files/4.1/samba4.initd-r1,v 1.3 2014/03/13 15:35:07 polynomial-c Exp $
+
+extra_started_commands="reload"
+piddir="/var/run/samba"
+
+depend() {
+	after slapd
+	need net
+	use cupsd
+}
+
+DAEMONNAME="${SVCNAME##samba.}"
+[ "${DAEMONNAME}" != "samba" ] && daemon_list=${DAEMONNAME}
+
+signal_do() {
+	local signal="$1"
+	[ -z "${signal}" ] && return 0
+
+	local result=0 last_result=0 daemon= cmd_exec=
+	for daemon in ${daemon_list} ; do
+		eval cmd_exec=\$${daemon}_${signal}
+		if [ -n "${cmd_exec}" ]; then
+			ebegin "${my_service_name} -> ${signal}: ${daemon}"
+			#echo ${cmd} '->' ${!cmd}
+			${cmd_exec} > /dev/null
+			last_result=$?
+			eend ${last_result}
+		fi
+		result=$(( ${result} + ${last_result} ))
+	done
+	return ${result}
+}
+
+start() {
+	${my_service_PRE}
+	[ -d "${piddir}" ] || mkdir -p "${piddir}"
+	signal_do start && return 0
+
+	eerror "Error: starting services (see system logs)"
+	signal_do stop
+	return 1
+}
+stop() {
+	${my_service_PRE}
+	if signal_do stop ; then
+		${my_service_POST}
+		return 0
+	fi
+}
+reload() {
+	${my_service_PRE}
+	signal_do reload
+}
diff --git a/pcr/openrc-net/slapd-confd-2.4.28-r1 b/pcr/openrc-net/slapd-confd-2.4.28-r1
new file mode 100644
index 000000000..ef19899a3
--- /dev/null
+++ b/pcr/openrc-net/slapd-confd-2.4.28-r1
@@ -0,0 +1,26 @@
+# conf.d file for openldap
+#
+# To enable both the standard unciphered server and the ssl encrypted
+# one uncomment this line or set any other server starting options
+# you may desire.
+
+# If you have multiple slapd instances per #376699, this will provide a default config
+INSTANCE="openldap${SVCNAME#slapd}"
+
+# If you use the classical configuration file:
+OPTS_CONF="-f /etc/${INSTANCE}/slapd.conf"
+# Uncomment this instead to use the new slapd.d configuration directory for openldap 2.3
+#OPTS_CONF="-F /etc/${INSTANCE}/slapd.d"
+# (the OPTS_CONF variable is also passed to slaptest during startup)
+
+OPTS="${OPTS_CONF} -h 'ldaps:// ldap:// ldapi://%2fvar%2frun%2fopenldap%2fslapd.sock'"
+# Optional connectionless LDAP:
+#OPTS="${OPTS_CONF} -h 'ldaps:// ldap:// ldapi://%2fvar%2frun%2fopenldap%2fslapd.sock cldap://'"
+
+# If you change the above listen statement to bind on a specific IP for
+# listening, you should ensure that interface is up here (change eth0 as
+# needed).
+#rc_need="net.eth0"
+
+# Specify the kerberos keytab file
+#KRB5_KTNAME=/etc/openldap/krb5-ldap.keytab
diff --git a/pcr/openrc-net/slapd-initd-2.4.28-r1 b/pcr/openrc-net/slapd-initd-2.4.28-r1
new file mode 100644
index 000000000..48946d6ef
--- /dev/null
+++ b/pcr/openrc-net/slapd-initd-2.4.28-r1
@@ -0,0 +1,36 @@
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-nds/openldap/files/slapd-initd-2.4.28-r1,v 1.4 2012/05/27 07:22:43 robbat2 Exp $
+
+extra_commands="checkconfig"
+
+[ -z "$INSTANCE" ] && INSTANCE="openldap${SVCNAME#slapd}"
+
+depend() {
+	need net
+	before dbus hald avahi-daemon
+	provide ldap
+}
+
+start() {
+	checkpath -q -d /var/run/openldap/ -o ldap:ldap 
+	if ! checkconfig -Q ; then
+		eerror "There is a problem with your slapd.conf!"
+		return 1
+	fi
+	ebegin "Starting ldap-server"
+	[ -n "$KRB5_KTNAME" ] && export KRB5_KTNAME
+	eval start-stop-daemon --start --pidfile /var/run/openldap/${SVCNAME}.pid --exec /usr/lib/openldap/slapd -- -u ldap -g ldap "${OPTS}"
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping ldap-server"
+	start-stop-daemon --stop --signal 2 --quiet --pidfile /var/run/openldap/${SVCNAME}.pid
+	eend $?
+}
+
+checkconfig() {
+	/usr/sbin/slaptest -u "$@" ${OPTS_CONF}
+}
diff --git a/pcr/openrc-net/slpd-init b/pcr/openrc-net/slpd-init
new file mode 100644
index 000000000..bbc0eac1a
--- /dev/null
+++ b/pcr/openrc-net/slpd-init
@@ -0,0 +1,89 @@
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-libs/openslp/files/slpd-init,v 1.5 2012/02/09 08:19:35 robbat2 Exp $
+
+depend() {
+	need net
+}
+
+#
+# Does nothing if a route exists that supports multicast traffic.
+# If no routes supporting multicast traffic exists, the function
+# tries to add one.  A 0 is returned on success and a 1 on failure.
+# One parameter must be passed in.  This variable determins verbosity.
+# If parameter is non-zero debugging will appear.
+#
+multicast_route_set() {
+	PING_OPTIONS_1='-c1 -w1'
+	PING_OPTIONS_2='-c1 -i1'
+	MULTICAST_ADDRESS='239.255.255.253'
+	TMP_FILE=/tmp/route.check
+	PING_ERROR_NO_ROUTE='unreachable'
+
+	MSG_FAILED_TO_FIND='Failed to Detect Multicast Route'
+	MSG_SUCCESS_ON_FIND='Multicast Route Enabled'
+	MSG_ADDING_ROUTE='Attempting to Add Multicast Route ...'
+	MSG_FAILED_TO_ADD=' FAILED - Route NOT Added.'
+	MSG_SUCCES_ON_ADD=' SUCCESS - Route Added.'
+
+	CMD_GET_INTERFACE="netstat -i | awk 'BEGIN{}(NR>2)&&(!/^lo*/){print \$1;exit}'"
+	CMD_ADD_ROUTE="route add -net 224.0.0.0 netmask 240.0.0.0"
+
+	ping $PING_OPTIONS_1 $MULTICAST_ADDRESS 2> $TMP_FILE 1> /dev/null
+	if [ $? = 2 ]; then
+		ping $PING_OPTIONS_2 $MULTICAST_ADDRESS 2> $TMP_FILE 1> /dev/null
+	fi
+
+	grep $PING_ERROR_NO_ROUTE $TMP_FILE > /dev/null 2>&1
+	err_unreachable_found=$?
+
+	#If errors, add route. Otherwise, do nothing
+	if [ -s $TMP_FILE ] && [ $err_unreachable_found = 0 ]; then 
+
+		if [ $1 != 0 ]; then
+			echo $MSG_FAILED_TO_FIND 
+			echo $MSG_ADDING_ROUTE 
+		fi
+
+		$CMD_ADD_ROUTE `eval $CMD_GET_INTERFACE` > /dev/null 2>&1
+		retval=$?
+		if [ $1 != 0 ]; then
+
+			if [ $retval = 0 ]; then
+				echo $MSG_SUCCES_ON_ADD
+			else
+				echo $MSG_FAILED_TO_ADD
+			fi
+		fi
+	else
+		if [ $1 != 0 ]; then
+			echo -n $MSG_SUCCESS_ON_FIND
+		fi
+		retval=0
+	fi
+
+	rm -f $TMP_FILE # Clean up
+	return $retval
+}
+
+checkconfig() {
+	multicast_route_set 0
+	if [ $? -ne 0 ]; then
+		eerror "No route available for multicast traffic!"
+		return 1
+	fi
+}
+
+start() {
+	checkconfig || return 1
+	ebegin "Starting slpd"
+	start-stop-daemon --start --quiet --exec /usr/sbin/slpd --pidfile /var/run/slpd.pid
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping slpd"
+	start-stop-daemon --stop --quiet --pidfile /var/run/slpd.pid
+	eend $?
+}
diff --git a/pcr/openrc-net/squid.confd-r1 b/pcr/openrc-net/squid.confd-r1
new file mode 100644
index 000000000..f17bfe06f
--- /dev/null
+++ b/pcr/openrc-net/squid.confd-r1
@@ -0,0 +1,13 @@
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-proxy/squid/files/squid.confd-r1,v 1.1 2013/01/11 15:25:49 eras Exp $
+
+# Config file for /etc/init.d/squid
+
+SQUID_OPTS="-YC"
+
+# Kerberos keytab file to use. This is required if you enable kerberos authentication.
+SQUID_KEYTAB=""
+
+# Use max_filedescriptors setting in squid.conf to determine the maximum number
+# of filedescriptors squid can open.
diff --git a/pcr/openrc-net/squid.initd-r4 b/pcr/openrc-net/squid.initd-r4
new file mode 100644
index 000000000..0b5741955
--- /dev/null
+++ b/pcr/openrc-net/squid.initd-r4
@@ -0,0 +1,118 @@
+#!/sbin/runscript
+# Copyright 1999-2014 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-proxy/squid/files/squid.initd-r4,v 1.1 2014/01/18 22:16:27 eras Exp $
+
+extra_started_commands="reload rotate"
+
+depend() {
+	use dns net
+}
+
+checkconfig() {
+	if [ ! -f /etc/squid/${SVCNAME}.conf ]; then
+		eerror "You need to create /etc/squid/${SVCNAME}.conf first."
+		eerror "An example can be found in /etc/squid/squid.conf.default"
+		return 1
+	fi
+
+	local PIDFILE=$(awk '/^[ \t]*pid_filename[ \t]+/ { print $2 }' < /etc/squid/${SVCNAME}.conf)
+	[ -z ${PIDFILE} ] && PIDFILE=/run/squid.pid
+	if [ /run/${SVCNAME}.pid != ${PIDFILE} ]; then
+		eerror "/etc/squid/${SVCNAME}.conf must set pid_filename to"
+		eerror "   /run/${SVCNAME}.pid"
+		eerror "CAUTION: http_port, cache_dir and *_log parameters must be different than"
+		eerror "         in any other instance of squid."
+		return 1
+	fi
+
+	# Maximum file descriptors squid can open is determined by:
+	# a basic default of N=1024
+	#  ... altered by ./configure --with-filedescriptors=N
+	#  ... overridden on production by squid.conf max_filedescriptors (if,
+	#  and only if, setrlimit() RLIMIT_NOFILE is able to be built+used).
+	# Since we do not configure hard coded # of filedescriptors anymore,
+	# there is no need for ulimit calls in the init script.
+	# Use max_filedescriptors in squid.conf instead.
+
+	local CACHE_SWAP=$(awk '/^[ \t]*cache_dir[ \t]+/ { if ( $2 == "rock" ) printf "%s/rock ", $3; else if ( $2 == "coss" ) printf "%s/stripe ", $3; else printf "%s/00 ", $3; }' < /etc/squid/${SVCNAME}.conf)
+	[ -z "$CACHE_SWAP" ] && CACHE_SWAP="/var/cache/squid/00"
+	
+	local x
+	for x in $CACHE_SWAP ; do
+		if [ ! -e $x ] ; then
+			ebegin "Initializing cache directory ${x%/*}"
+			local ORIG_UMASK=$(umask)
+			umask 027
+
+			if ! (mkdir -p ${x%/*} && chown squid ${x%/*}) ; then
+				eend 1
+				return 1
+			fi
+
+			local INIT_CACHE_RESPONSE="$(/usr/sbin/squid -z -N -f /etc/squid/${SVCNAME}.conf 2>&1)"
+			if [ $? != 0 ] || echo "$INIT_CACHE_RESPONSE" | grep -q "erminated abnormally" ; then
+				umask $ORIG_UMASK
+				eend 1
+				echo "$INIT_CACHE_RESPONSE"
+				return 1
+			fi
+
+			umask $ORIG_UMASK
+			eend 0
+			break
+		fi
+	done
+	
+	return 0
+}
+
+start() {
+	checkconfig || return 1
+	checkpath -d -q -m 0750 -o squid:squid /run/${SVCNAME}
+
+	ebegin "Starting ${SVCNAME}"
+	KRB5_KTNAME="${SQUID_KEYTAB}" /usr/sbin/squid ${SQUID_OPTS} -f /etc/squid/${SVCNAME}.conf
+	eend $? && sleep 1
+}
+
+stop() {
+	ebegin "Stopping ${SVCNAME}"
+	if /usr/sbin/squid -k shutdown -f /etc/squid/${SVCNAME}.conf ; then
+		# Now we have to wait until squid has _really_ stopped.
+		sleep 1
+		if [ -f /run/${SVCNAME}.pid ] ; then
+			einfon "Waiting for squid to shutdown ."
+			cnt=0
+			while [ -f /run/${SVCNAME}.pid ] ; do
+				cnt=$(expr $cnt + 1)
+				if [ $cnt -gt 60 ] ; then
+					# Waited 120 seconds now. Fail.
+					echo
+					eend 1 "Failed."
+					break
+				fi
+				sleep 2
+				echo -n "."
+			done
+			echo
+		fi
+	else
+		eerror "Squid shutdown failed, probably service is already down."
+	fi
+	eend 0
+}
+
+reload() {
+	checkconfig || return 1
+	ebegin "Reloading ${SVCNAME}"
+	/usr/sbin/squid -k reconfigure -f /etc/squid/${SVCNAME}.conf
+	eend $?
+}
+
+rotate() {
+	service_started ${SVCNAME} || return 1
+	ebegin "Rotating ${SVCNAME} logs"
+	/usr/sbin/squid -k rotate -f /etc/squid/${SVCNAME}.conf
+	eend $?
+}
diff --git a/pcr/openrc-net/sshd.confd b/pcr/openrc-net/sshd.confd
new file mode 100644
index 000000000..28952b4a2
--- /dev/null
+++ b/pcr/openrc-net/sshd.confd
@@ -0,0 +1,21 @@
+# /etc/conf.d/sshd: config file for /etc/init.d/sshd
+
+# Where is your sshd_config file stored?
+
+SSHD_CONFDIR="/etc/ssh"
+
+
+# Any random options you want to pass to sshd.
+# See the sshd(8) manpage for more info.
+
+SSHD_OPTS=""
+
+
+# Pid file to use (needs to be absolute path).
+
+#SSHD_PIDFILE="/var/run/sshd.pid"
+
+
+# Path to the sshd binary (needs to be absolute path).
+
+#SSHD_BINARY="/usr/sbin/sshd"
diff --git a/pcr/openrc-net/sshd.rc6.4 b/pcr/openrc-net/sshd.rc6.4
new file mode 100644
index 000000000..1b872bc87
--- /dev/null
+++ b/pcr/openrc-net/sshd.rc6.4
@@ -0,0 +1,87 @@
+#!/sbin/runscript
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-misc/openssh/files/sshd.rc6.4,v 1.3 2013/04/24 03:13:03 vapier Exp $
+
+extra_commands="checkconfig"
+extra_started_commands="reload"
+
+SSHD_CONFDIR=${SSHD_CONFDIR:-/etc/ssh}
+SSHD_CONFIG=${SSHD_CONFIG:-${SSHD_CONFDIR}/sshd_config}
+SSHD_PIDFILE=${SSHD_PIDFILE:-/var/run/${SVCNAME}.pid}
+SSHD_BINARY=${SSHD_BINARY:-/usr/sbin/sshd}
+
+depend() {
+	use logger dns
+	if [ "${rc_need+set}" = "set" ]; then
+		: # Do nothing, the user has explicitly set rc_need
+	else
+		warn_addr=''
+		for x in $(awk '/^ListenAddress/{ print $2 }' "$SSHD_CONFIG" 2>/dev/null) ; do
+			case "$x" in
+				0.0.0.0|0.0.0.0:*) ;;
+				::|\[::\]*) ;;
+				*) warn_addr="${warn_addr} $x" ;;
+			esac
+		done
+		unset x
+		if [ "${warn_addr:+set}" = "set" ]; then
+			need net 
+			ewarn "You are binding an interface in ListenAddress statement in your sshd_config!"
+			ewarn "You must add rc_need=\"net.FOO\" to your /etc/conf.d/sshd"
+			ewarn "where FOO is the interface(s) providing the following address(es):"
+			ewarn "${warn_addr}"
+		fi
+		unset warn_addr
+	fi
+}
+
+checkconfig() {
+	if [ ! -d /var/empty ] ; then
+		mkdir -p /var/empty || return 1
+	fi
+
+	if [ ! -e "${SSHD_CONFDIR}"/sshd_config ] ; then
+		eerror "You need an ${SSHD_CONFDIR}/sshd_config file to run sshd"
+		eerror "There is a sample file in /usr/share/doc/openssh"
+		return 1
+	fi
+
+	ssh-keygen -A || return 1
+
+	[ "${SSHD_PIDFILE}" != "/var/run/sshd.pid" ] \
+		&& SSHD_OPTS="${SSHD_OPTS} -o PidFile=${SSHD_PIDFILE}"
+	[ "${SSHD_CONFDIR}" != "/etc/ssh" ] \
+		&& SSHD_OPTS="${SSHD_OPTS} -f ${SSHD_CONFDIR}/sshd_config"
+
+	"${SSHD_BINARY}" -t ${SSHD_OPTS} || return 1
+}
+
+start() {
+	checkconfig || return 1
+
+	ebegin "Starting ${SVCNAME}"
+	start-stop-daemon --start --exec "${SSHD_BINARY}" \
+	    --pidfile "${SSHD_PIDFILE}" \
+	    -- ${SSHD_OPTS}
+	eend $?
+}
+
+stop() {
+	if [ "${RC_CMD}" = "restart" ] ; then
+		checkconfig || return 1
+	fi
+
+	ebegin "Stopping ${SVCNAME}"
+	start-stop-daemon --stop --exec "${SSHD_BINARY}" \
+	    --pidfile "${SSHD_PIDFILE}" --quiet
+	eend $?
+}
+
+reload() {
+	checkconfig || return 1
+	ebegin "Reloading ${SVCNAME}"
+	start-stop-daemon --signal HUP \
+	    --exec "${SSHD_BINARY}" --pidfile "${SSHD_PIDFILE}"
+	eend $?
+}
diff --git a/pcr/openrc-net/tor.confd b/pcr/openrc-net/tor.confd
new file mode 100644
index 000000000..4195bf323
--- /dev/null
+++ b/pcr/openrc-net/tor.confd
@@ -0,0 +1,3 @@
+#
+# Set the file limit
+rc_ulimit="-n 30000"
diff --git a/pcr/openrc-net/tor.initd-r6 b/pcr/openrc-net/tor.initd-r6
new file mode 100644
index 000000000..c31eac12f
--- /dev/null
+++ b/pcr/openrc-net/tor.initd-r6
@@ -0,0 +1,60 @@
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-misc/tor/files/Attic/tor.initd-r6,v 1.7 2015/03/20 12:46:13 blueness dead $
+
+extra_commands="checkconfig"
+extra_started_commands="reload"
+
+PIDFILE=/var/run/tor/tor.pid
+CONFFILE=/etc/tor/torrc
+
+depend() {
+        need net
+}
+
+checkconfig() {
+        # first check that it exists
+        if [ ! -f ${CONFFILE} ] ; then
+                eerror "You need to setup ${CONFFILE} first"
+                eerror "Example is in ${CONFFILE}.sample"
+                return 1
+	fi
+
+	# now verify whether the configuration is valid
+	/usr/bin/tor --verify-config -f ${CONFFILE} > /dev/null 2>&1
+	if [ $? -eq 0 ] ; then
+		einfo "Tor configuration (${CONFFILE}) is valid."
+		return 0
+	else
+		eerror "Tor configuration (${CONFFILE}) not valid."
+		/usr/bin/tor --verify-config -f ${CONFFILE}
+		return 1
+	fi
+}
+
+start() {
+	checkconfig || return 1
+	checkpath -d -m 0755 -o tor:tor /var/run/tor
+        ebegin "Starting Tor"
+        HOME=/var/lib/tor
+	start-stop-daemon --start --pidfile "${PIDFILE}" --quiet --exec /usr/bin/tor  -- -f "${CONFFILE}" --runasdaemon 1 --PidFile "${PIDFILE}" > /dev/null 2>&1
+        eend $?
+}
+
+stop() {
+        ebegin "Stopping Tor"
+	start-stop-daemon --stop --pidfile "${PIDFILE}" --exec /usr/bin/tor -- --PidFile "${PIDFILE}"
+        eend $?
+}
+
+reload() {
+	if [ ! -f ${PIDFILE} ]; then
+		eerror "${SVCNAME} isn't running"
+		return 1
+	fi
+	checkconfig || return 1
+	ebegin "Reloading Tor configuration"
+	start-stop-daemon --signal HUP --pidfile ${PIDFILE}
+	eend $?
+}
diff --git a/pcr/openrc-net/transmission-daemon.confd.4 b/pcr/openrc-net/transmission-daemon.confd.4
new file mode 100644
index 000000000..8f3b1317a
--- /dev/null
+++ b/pcr/openrc-net/transmission-daemon.confd.4
@@ -0,0 +1,14 @@
+# This is the transmission-daemon configuration file. For other options and
+# better explanation, take a look at transmission-daemon manual page Note: it's
+# better to configure some settings (like username/password) in
+# /var/lib/transmission/config/settings.json to avoid other users see it with `ps`
+
+TRANSMISSION_OPTIONS="--encryption-preferred"
+
+# Run daemon as another user (username or username:groupname)
+# If you change this setting, chown -R /var/lib/transmission/config <and download directory, check web settings>
+#runas_user=transmission
+
+# Location of logfile (should be writeable for runas_user user)
+# Set logfile=syslog to use syslog for logging
+#logfile=/var/log/transmission/transmission.log
diff --git a/pcr/openrc-net/transmission-daemon.initd.9 b/pcr/openrc-net/transmission-daemon.initd.9
new file mode 100644
index 000000000..3c4914c58
--- /dev/null
+++ b/pcr/openrc-net/transmission-daemon.initd.9
@@ -0,0 +1,73 @@
+#!/sbin/runscript
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-p2p/transmission/files/transmission-daemon.initd.9,v 1.1 2013/09/07 12:10:01 ssuominen Exp $
+
+extra_started_commands="reload"
+description="Transmission is a fast, easy and free bittorrent client"
+description_start="Start transmission-daemon server and web interface"
+description_stop="Stop transmission-daemon server and web interface"
+description_reload="Reload transmission-daemon settings"
+
+rundir=${rundir:-/var/run/transmission}
+pidfile=${pidfile:-${rundir}/transmission.pid}
+config_dir=${config_dir:-/var/lib/transmission/config}
+download_dir=${download_dir:-/var/lib/transmission/downloads}
+logfile=${logfile:-/var/log/transmission/transmission.log}
+runas_user=${runas_user:-transmission:transmission}
+
+SSD_OPTIONS=""
+
+depend() {
+	need net
+}
+
+check_config() {
+	if [ ! -d "${rundir}" ]; then
+		mkdir "${rundir}"
+		if [ -n "${runas_user}" ]; then
+			chown -R ${runas_user} "${rundir}"
+		fi
+	fi
+
+	# In case no config directory option passed use default
+	if ! $(echo ${TRANSMISSION_OPTIONS} | grep -q -e '\B-g' -e '\B--config-dir'); then
+		TRANSMISSION_OPTIONS="${TRANSMISSION_OPTIONS} --config-dir ${config_dir}"
+		# put download dir location on first run (and take it from config later)
+		if [ ! -f ${config_dir}/settings.json ]; then
+			TRANSMISSION_OPTIONS="${TRANSMISSION_OPTIONS} --download-dir ${download_dir}"
+		fi
+	fi
+
+	if [ -n "${runas_user}" ]; then
+		if [ -f /etc/init.d/sysfs ]; then
+			SSD_OPTIONS="${SSD_OPTIONS} --user ${runas_user}"
+		else
+			SSD_OPTIONS="${SSD_OPTIONS} --chuid ${runas_user}"
+		fi
+	fi
+}
+
+start() {
+	check_config
+
+	ebegin "Starting transmission daemon"
+	start-stop-daemon --start --quiet --pidfile ${pidfile} ${SSD_OPTIONS} \
+		--exec /usr/bin/transmission-daemon -- --pid-file ${pidfile} \
+		$(test ${logfile} != "syslog" && echo --logfile ${logfile}) \
+		${TRANSMISSION_OPTIONS}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping transmission daemon"
+	start-stop-daemon --stop --quiet --retry TERM/45/QUIT/15 --pidfile ${pidfile}
+	eend $?
+}
+
+reload() {
+	ebegin "Reloading transmission configuration"
+	start-stop-daemon --signal HUP --pidfile ${pidfile}
+	eend $?
+}
+
diff --git a/pcr/openrc-net/ufw-2.initd b/pcr/openrc-net/ufw-2.initd
new file mode 100644
index 000000000..1ffd1c596
--- /dev/null
+++ b/pcr/openrc-net/ufw-2.initd
@@ -0,0 +1,137 @@
+#!/sbin/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-firewall/ufw/files/ufw-2.initd,v 1.2 2012/06/13 21:14:52 thev00d00 Exp $
+
+depend() {
+	before net
+	provide firewall
+}
+
+start() {
+	ebegin "Starting ufw"
+	_source_file || { eend $?; return $?; }
+
+	local enabled_in_cfg ret
+	_check_if_enabled_in_cfg
+	enabled_in_cfg=$?
+
+	# Avoid "Firewall already started, use 'force-reload'" message that
+	# appears if `ufw enable' had been run before start().
+	if _status_quiet; then
+		eend 0
+		return
+	fi
+
+	# The ufw_start function does the same: if ufw is disabled using `ufw disable',
+	# ufw_start would not start ufw and return 0, so let's handle this case.
+	case $enabled_in_cfg in
+	0)
+		ufw_start
+		ret=$?
+		eend $ret "Failed to start ufw."
+		;;
+	1)
+		# see /etc/conf.d/<name>
+		if [ "${ufw_nonfatal_if_disabled:-no}" != "yes" ]; then
+			ret=1
+			eend $ret "Not starting firewall (not enabled), use \"ufw enable\" first."
+		else
+			ret=0
+			eend 0
+		fi
+		;;
+	2)
+		ret=1
+		eend $ret "Failed to start ufw."
+		;;
+	esac
+
+	return $ret
+}
+
+stop() {
+	ebegin "Stopping ufw"
+	_source_file || { eend $?; return $?; }
+	local enabled_in_cfg ret
+	_check_if_enabled_in_cfg
+	enabled_in_cfg=$?
+
+	# Same as above (unless --force is passed to ufw_stop).
+	case $enabled_in_cfg in
+	0)
+		ufw_stop
+		ret=$?
+		;;
+	1)
+		einfo "INFO: ufw is configured to be disabled"
+		ufw_stop --force
+		ret=$?
+		;;
+	2)
+		ret=1
+		;;
+	esac
+
+	eend $ret "Failed to stop ufw."
+	return $ret
+}
+
+_status_quiet() {
+	# return values: 0 - started, 1 - stopped, 2 - error
+	# Does not execute _source_file.
+	local ret
+	ufw_status > /dev/null
+	ret=$?
+	# Return values for ufw_status come from /usr/share/ufw/ufw-init-functions.
+	case $ret in
+	0) return 0 ;;
+	3) return 1 ;;
+	*) return 2 ;;
+	esac
+}
+
+_source_file() {
+	local sourced_f="/usr/share/ufw/ufw-init-functions"
+	if [ ! -f "$sourced_f" ]; then
+		eerror "Cannot find file $sourced_f!"
+		return 1
+	fi
+
+	local _path=$PATH
+	if ! . "$sourced_f"; then
+		# PATH can be broken here, fix it...
+		PATH=$_path
+		eerror "Error sourcing file $sourced_f"
+		return 1
+	fi
+
+	if [ -z "$PATH" ]; then
+		PATH=$_path
+	else
+		PATH="${PATH}:${_path}"
+	fi
+	return 0
+}
+
+_check_if_enabled_in_cfg() {
+	# Check if user has enabled the firewall with "ufw enable".
+	# Return 0 if firewall enabled in configuration file, 1 otherwise, 2 on error.
+
+	local sourced_f="/etc/ufw/ufw.conf"
+	if [ ! -f "$sourced_f" ]; then
+		eerror "Cannot find file $sourced_f!"
+		return 2
+	fi
+
+	if ! . "$sourced_f"; then
+		eerror "Error sourcing file $sourced_f"
+		return 2
+	fi
+
+	if [ "$ENABLED" = "yes" ] || [ "$ENABLED" = "YES" ]; then
+		return 0
+	else
+		return 1
+	fi
+}
diff --git a/pcr/openrc-net/ufw.confd b/pcr/openrc-net/ufw.confd
new file mode 100644
index 000000000..900d3bf67
--- /dev/null
+++ b/pcr/openrc-net/ufw.confd
@@ -0,0 +1,5 @@
+# If equals to "yes", warnings that firewall is disabled
+# (using `ufw disable') will be suppressed and the service
+# will be considered started.
+# Default if unset or another value is "no".
+ufw_nonfatal_if_disabled=no
diff --git a/pcr/openrc-net/vsftpd-checkconfig.sh b/pcr/openrc-net/vsftpd-checkconfig.sh
new file mode 100644
index 000000000..e1d1e5231
--- /dev/null
+++ b/pcr/openrc-net/vsftpd-checkconfig.sh
@@ -0,0 +1,29 @@
+#!/bin/sh
+
+VSFTPD_CONF="${VSFTPD_CONF:-/etc/vsftpd/vsftpd.conf}"
+
+if [ ! -e ${VSFTPD_CONF} ] ; then
+	echo "Please setup ${VSFTPD_CONF} before starting vsftpd" >&2
+	echo "There are sample configurations in /usr/share/doc/vsftpd" >&2
+	exit 1
+fi
+
+if egrep -iq "^ *background *= *yes" "${VSFTPD_CONF}" ; then
+	echo "${VSFTPD_CONF} must not set background=YES" >&2
+	exit 1
+fi
+
+has_ip=false has_ipv6=false ip_error=true
+egrep -iq "^ *listen *= *yes" "${VSFTPD_CONF}" && has_ip=true
+egrep -iq "^ *listen_ipv6 *= *yes" "${VSFTPD_CONF}" && has_ipv6=true
+if ${has_ip} && ! ${has_ipv6} ; then
+	ip_error=false
+elif ! ${has_ip} && ${has_ipv6} ; then
+	ip_error=false
+fi
+if ${ip_error} ; then
+	echo "${VSFTPD_CONF} must contain listen=YES or listen_ipv6=YES" >&2
+	echo "but not both" >&2
+	exit 1
+fi
+
diff --git a/pcr/openrc-net/vsftpd.init b/pcr/openrc-net/vsftpd.init
new file mode 100644
index 000000000..e1c26c7d8
--- /dev/null
+++ b/pcr/openrc-net/vsftpd.init
@@ -0,0 +1,51 @@
+#!/sbin/runscript
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License, v2
+# $Header: /var/cvsroot/gentoo-x86/net-ftp/vsftpd/files/vsftpd.init,v 1.9 2015/01/31 13:07:47 hwoarang Exp $
+
+VSFTPD_NAME=${SVCNAME##*.}
+if [ -n "${VSFTPD_NAME}" -a "${SVCNAME}" != "vsftpd" ]; then
+    VSFTPD_PID="/var/run/vsftpd.${VSFTPD_NAME}.pid"
+    VSFTPD_CONF_DEFAULT="/etc/vsftpd/${VSFTPD_NAME}.conf"
+else
+    VSFTPD_PID="/var/run/vsftpd.pid"
+    VSFTPD_CONF_DEFAULT="/etc/vsftpd/vsftpd.conf"
+fi
+VSFTPD_CONF=${VSFTPD_CONF:-${VSFTPD_CONF_DEFAULT}}
+VSFTPD_EXEC=${VSFTPD_EXEC:-/usr/sbin/vsftpd}
+
+depend() {
+	need net
+	use dns logger
+}
+
+checkconfig() {
+	VSFTPD_CONF="${VSFTPD_CONF}" \
+		/usr/libexec/vsftpd-checkconfig.sh || return 1
+}
+
+start() {
+	checkconfig || return 1
+	ebegin "Starting ${SVCNAME}"
+	start-stop-daemon --start --exec ${VSFTPD_EXEC} \
+		--background --make-pidfile --pidfile "${VSFTPD_PID}" \
+		-- "${VSFTPD_CONF}"
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping ${SVCNAME}"
+	local retval=0
+	if [ -f ${VSFTPD_PID} ]; then
+		start-stop-daemon --stop --pidfile ${VSFTPD_PID} || retval=1
+		pkill --full ${VSFTPD_CONF}
+	else
+		ewarn "Couldn't find ${VSFTPD_PID} trying to stop using the config filename ${VSFTPD_CONF}"
+		pgrep --full ${VSFTPD_CONF} > ${VSFTPD_PID}
+		start-stop-daemon --stop --pidfile ${VSFTPD_PID} || retval=1
+		pkill --full ${VSFTPD_CONF}
+	fi
+	eend ${retval}
+}
+
+# vim: ts=4
diff --git a/pcr/openrc-net/xinetd.confd b/pcr/openrc-net/xinetd.confd
new file mode 100644
index 000000000..ae211f3d8
--- /dev/null
+++ b/pcr/openrc-net/xinetd.confd
@@ -0,0 +1,3 @@
+# /etc/conf.d/xinetd: config file for /etc/init.d/xinetd
+
+XINETD_OPTS="-stayalive -reuse"
diff --git a/pcr/openrc-net/xinetd.rc6 b/pcr/openrc-net/xinetd.rc6
new file mode 100644
index 000000000..2f90775c0
--- /dev/null
+++ b/pcr/openrc-net/xinetd.rc6
@@ -0,0 +1,33 @@
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-apps/xinetd/files/xinetd.rc6,v 1.24 2011/10/11 01:26:08 vapier Exp $
+
+extra_started_commands="reload dump check"
+
+depend() {
+	use net
+}
+
+start() {
+	ebegin "Starting xinetd"
+	start-stop-daemon --start --exec /usr/sbin/xinetd -- \
+		-pidfile /var/run/xinetd.pid ${XINETD_OPTS}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping xinetd"
+	start-stop-daemon --stop --quiet --pidfile /var/run/xinetd.pid
+	eend $?
+}
+
+do_sig() {
+	local sig=$1 ; shift
+	ebegin "$*"
+	start-stop-daemon --signal ${sig} --pidfile /var/run/xinetd.pid
+	eend $?
+}
+reload() { do_sig HUP  "Reloading configuration" ; }
+dump()   { do_sig USR1 "Dumping configuration" ; }
+check()  { do_sig IOT  "Performing Consistency Check" ; }
diff --git a/pcr/openrc-net/ypbind.confd-r1 b/pcr/openrc-net/ypbind.confd-r1
new file mode 100644
index 000000000..91cdc60c1
--- /dev/null
+++ b/pcr/openrc-net/ypbind.confd-r1
@@ -0,0 +1,4 @@
+# Config file for /etc/init.d/ypbind
+
+# Set any command line options you want to pass to ypbind.
+YPBIND_OPTS=""
diff --git a/pcr/openrc-net/ypbind.initd b/pcr/openrc-net/ypbind.initd
new file mode 100644
index 000000000..f227a4172
--- /dev/null
+++ b/pcr/openrc-net/ypbind.initd
@@ -0,0 +1,41 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-nds/ypbind/files/ypbind.initd,v 1.6 2009/02/24 17:25:01 drizzt Exp $
+
+depend() {
+	need net portmap
+	use ypserv domainname
+}
+
+start() {
+	ebegin "Starting ypbind"
+	if [ -n "${YPBIND_OPTS}" ]; then
+		YOPTS="-- ${YPBIND_OPTS}"
+	fi
+	start-stop-daemon --start --quiet --exec /usr/sbin/ypbind ${YOPTS}
+	local ret=$?
+	if [ $ret -eq 0 ] ; then
+		notfound=1
+		for i in 0 1 2 3 4 5 6 7 8 9
+		do
+			ypwhich >/dev/null 2>&1 && { notfound=0; break; }
+			sleep 1
+		done
+		if [ $notfound -eq 1 ] ; then
+			eend 1 "No NIS server found"
+		else
+			eend 0
+		fi
+	else
+		eend $ret
+	fi
+}
+
+stop() {
+	ebegin "Stopping ypbind"
+	start-stop-daemon --stop --quiet --exec /usr/sbin/ypbind
+	eend $?
+	# Remove binding files, if ypbind "forgets" it
+	rm -f /var/yp/binding/*
+}
diff --git a/pcr/openrc-net/ypserv b/pcr/openrc-net/ypserv
new file mode 100644
index 000000000..be1dc42e1
--- /dev/null
+++ b/pcr/openrc-net/ypserv
@@ -0,0 +1,23 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/net-nds/ypserv/files/ypserv,v 1.4 2006/04/10 20:00:18 eradicator Exp $
+
+depend() {
+	need net portmap
+	use domainname
+}
+
+start() {
+	ebegin "Starting NIS Server"
+	YOPTS=""
+	if [ -n "${YPSERV_OPTS}" ]; then YOPTS="-- ${YPSERV_OPTS}"; fi
+	start-stop-daemon --start --quiet --exec /usr/sbin/ypserv ${YOPTS}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping NIS Server"
+	start-stop-daemon --stop --quiet --exec /usr/sbin/ypserv
+	eend $?
+}
diff --git a/pcr/openrc-net/ypserv.confd b/pcr/openrc-net/ypserv.confd
new file mode 100644
index 000000000..0ae9756dc
--- /dev/null
+++ b/pcr/openrc-net/ypserv.confd
@@ -0,0 +1,4 @@
+# Config file for /etc/init.d/ypserv
+
+# Command line options to pass to ypserv:
+YPSERV_OPTS=""
-- 
cgit v1.2.3-54-g00ecf