From 11467233d8b439275ce1e1db650a4c6f91a9db1f Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 2 Mar 2016 00:23:43 -0300 Subject: move uboot4extlinux packages to [libre-testing] since it aren't stable yet --- .../0001-parabola-arm-modifications.patch | 243 --- libre/uboot4extlinux-am335x_bone/PKGBUILD | 53 - libre/uboot4extlinux-am335x_bone/extlinux.conf | 46 - libre/uboot4extlinux-am335x_bone/uEnv.txt | 1 - .../uboot4extlinux-am335x_bone.install | 37 - ...x-compiler-gcc5.h-to-fix-builds-with-gcc5.patch | 93 -- .../0002-ARM-asm-io.h-use-static-inline.patch | 76 - ...mon-main.c-make-show_boot_progress-__weak.patch | 31 - ...mmon-board_f-cosmetic-use-__weak-for-leds.patch | 109 -- .../0005-chiliboard-support.patch | 1685 -------------------- .../0006-parabola-arm-modifications.patch | 423 ----- libre/uboot4extlinux-chiliboard/PKGBUILD | 62 - libre/uboot4extlinux-chiliboard/extlinux.conf | 46 - libre/uboot4extlinux-chiliboard/uEnv.txt | 1 - .../uboot4extlinux-chiliboard.install | 37 - .../0001-parabola-arm-modifications.patch | 312 ---- libre/uboot4extlinux-omap3_beagle/PKGBUILD | 51 - libre/uboot4extlinux-omap3_beagle/extlinux.conf | 46 - libre/uboot4extlinux-omap3_beagle/uEnv.txt | 0 .../uboot4extlinux-omap3_beagle.install | 11 - .../0001-parabola-arm-modifications.patch | 135 -- libre/uboot4extlinux-omap4_panda/PKGBUILD | 49 - libre/uboot4extlinux-omap4_panda/extlinux.conf | 46 - libre/uboot4extlinux-omap4_panda/uEnv.txt | 2 - .../uboot4extlinux-omap4_panda.install | 26 - .../0001-parabola-arm-modifications.patch | 66 - libre/uboot4extlinux-sunxi/PKGBUILD | 237 --- libre/uboot4extlinux-sunxi/extlinux.conf | 46 - .../uboot4extlinux-sunxi.install | 27 - .../0001-parabola-arm-modifications.patch | 389 ----- .../0002-kernel-add-support-for-gcc-5.patch | 97 -- libre/uboot4extlinux-udoo/PKGBUILD | 69 - libre/uboot4extlinux-udoo/extlinux.conf | 46 - .../uboot4extlinux-udoo.install | 28 - .../0001-parabola-arm-modifications.patch | 153 -- libre/uboot4extlinux-wandboard/PKGBUILD | 46 - libre/uboot4extlinux-wandboard/extlinux.conf | 46 - .../uboot4extlinux-wandboard.install | 29 - 38 files changed, 4900 deletions(-) delete mode 100644 libre/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch delete mode 100644 libre/uboot4extlinux-am335x_bone/PKGBUILD delete mode 100644 libre/uboot4extlinux-am335x_bone/extlinux.conf delete mode 100644 libre/uboot4extlinux-am335x_bone/uEnv.txt delete mode 100644 libre/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install delete mode 100644 libre/uboot4extlinux-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch delete mode 100644 libre/uboot4extlinux-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch delete mode 100644 libre/uboot4extlinux-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch delete mode 100644 libre/uboot4extlinux-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch delete mode 100644 libre/uboot4extlinux-chiliboard/0005-chiliboard-support.patch delete mode 100644 libre/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch delete mode 100644 libre/uboot4extlinux-chiliboard/PKGBUILD delete mode 100644 libre/uboot4extlinux-chiliboard/extlinux.conf delete mode 100644 libre/uboot4extlinux-chiliboard/uEnv.txt delete mode 100644 libre/uboot4extlinux-chiliboard/uboot4extlinux-chiliboard.install delete mode 100644 libre/uboot4extlinux-omap3_beagle/0001-parabola-arm-modifications.patch delete mode 100644 libre/uboot4extlinux-omap3_beagle/PKGBUILD delete mode 100644 libre/uboot4extlinux-omap3_beagle/extlinux.conf delete mode 100644 libre/uboot4extlinux-omap3_beagle/uEnv.txt delete mode 100644 libre/uboot4extlinux-omap3_beagle/uboot4extlinux-omap3_beagle.install delete mode 100644 libre/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch delete mode 100644 libre/uboot4extlinux-omap4_panda/PKGBUILD delete mode 100644 libre/uboot4extlinux-omap4_panda/extlinux.conf delete mode 100644 libre/uboot4extlinux-omap4_panda/uEnv.txt delete mode 100644 libre/uboot4extlinux-omap4_panda/uboot4extlinux-omap4_panda.install delete mode 100644 libre/uboot4extlinux-sunxi/0001-parabola-arm-modifications.patch delete mode 100644 libre/uboot4extlinux-sunxi/PKGBUILD delete mode 100644 libre/uboot4extlinux-sunxi/extlinux.conf delete mode 100644 libre/uboot4extlinux-sunxi/uboot4extlinux-sunxi.install delete mode 100644 libre/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch delete mode 100644 libre/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-5.patch delete mode 100644 libre/uboot4extlinux-udoo/PKGBUILD delete mode 100644 libre/uboot4extlinux-udoo/extlinux.conf delete mode 100644 libre/uboot4extlinux-udoo/uboot4extlinux-udoo.install delete mode 100644 libre/uboot4extlinux-wandboard/0001-parabola-arm-modifications.patch delete mode 100644 libre/uboot4extlinux-wandboard/PKGBUILD delete mode 100644 libre/uboot4extlinux-wandboard/extlinux.conf delete mode 100644 libre/uboot4extlinux-wandboard/uboot4extlinux-wandboard.install (limited to 'libre') diff --git a/libre/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch b/libre/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch deleted file mode 100644 index 0f1c145da..000000000 --- a/libre/uboot4extlinux-am335x_bone/0001-parabola-arm-modifications.patch +++ /dev/null @@ -1,243 +0,0 @@ -diff -Nur u-boot-2015.04.orig/configs/am335x_evm_defconfig u-boot-2015.04/configs/am335x_evm_defconfig ---- u-boot-2015.04.orig/configs/am335x_evm_defconfig 2015-04-13 11:53:03.000000000 -0300 -+++ u-boot-2015.04/configs/am335x_evm_defconfig 2016-02-24 12:05:57.627551576 -0300 -@@ -1,7 +1,6 @@ - CONFIG_SPL=y - CONFIG_SPL_STACK_R=y - CONFIG_SPL_STACK_R_ADDR=0x82000000 --CONFIG_SYS_EXTRA_OPTIONS="NAND" --CONFIG_CONS_INDEX=1 -+CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" - CONFIG_ARM=y - CONFIG_TARGET_AM335X_EVM=y -diff -Nur u-boot-2015.04.orig/include/configs/am335x_evm.h u-boot-2015.04/include/configs/am335x_evm.h ---- u-boot-2015.04.orig/include/configs/am335x_evm.h 2015-04-13 11:53:03.000000000 -0300 -+++ u-boot-2015.04/include/configs/am335x_evm.h 2016-02-24 12:09:41.983016704 -0300 -@@ -17,6 +17,7 @@ - #define __CONFIG_AM335X_EVM_H - - #include -+#define CONFIG_ENV_IS_NOWHERE - - #ifndef CONFIG_SPL_BUILD - #ifndef CONFIG_FIT -@@ -45,6 +46,9 @@ - /* Enhance our eMMC support / experience. */ - #define CONFIG_CMD_GPT - #define CONFIG_EFI_PARTITION -+#define CONFIG_CMD_PART -+#define CONFIG_PARTITION_UUIDS -+#define CONFIG_CMD_SETEXPR - - #ifdef CONFIG_NAND - #define NANDARGS \ -@@ -67,113 +71,90 @@ - - #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - -+/* Enable Extlinux boot support */ -+#define CONFIG_CMD_PXE -+#define CONFIG_MENU -+#define BOOT_TARGET_DEVICES(func) -+#include -+ - #ifndef CONFIG_SPL_BUILD - #define CONFIG_EXTRA_ENV_SETTINGS \ -+ BOOTENV \ - DEFAULT_LINUX_BOOT_ENV \ -- "boot_fdt=try\0" \ -- "bootpart=0:2\0" \ -+ "bootpart=0:1\0" \ - "bootdir=/boot\0" \ -+ "fdtdir=/boot/dtbs\0" \ - "bootfile=zImage\0" \ - "fdtfile=undefined\0" \ -+ "rdfile=initramfs-linux.img\0" \ - "console=ttyO0,115200n8\0" \ - "partitions=" \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ - "optargs=\0" \ -- "mmcdev=0\0" \ -- "mmcroot=/dev/mmcblk0p2 ro\0" \ -- "mmcrootfstype=ext4 rootwait\0" \ -- "rootpath=/export/rootfs\0" \ -- "nfsopts=nolock\0" \ -- "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ -- "::off\0" \ -- "ramroot=/dev/ram0 rw\0" \ -- "ramrootfstype=ext2\0" \ -+ "cape_disable=\0" \ -+ "cape_enable=\0" \ -+ "cmdline=\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ -- "root=${mmcroot} " \ -- "rootfstype=${mmcrootfstype}\0" \ -- "spiroot=/dev/mtdblock4 rw\0" \ -- "spirootfstype=jffs2\0" \ -- "spisrcaddr=0xe0000\0" \ -- "spiimgsize=0x362000\0" \ -- "spibusno=0\0" \ -- "spiargs=setenv bootargs console=${console} " \ -- "${optargs} " \ -- "root=${spiroot} " \ -- "rootfstype=${spirootfstype}\0" \ -- "netargs=setenv bootargs console=${console} " \ -- "${optargs} " \ -- "root=/dev/nfs " \ -- "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ -- "ip=dhcp\0" \ -- "bootenv=uEnv.txt\0" \ -- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ -- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ -- "source ${loadaddr}\0" \ -- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ -- "importbootenv=echo Importing environment from mmc ...; " \ -- "env import -t -r $loadaddr $filesize\0" \ -- "ramargs=setenv bootargs console=${console} " \ -- "${optargs} " \ -- "root=${ramroot} " \ -- "rootfstype=${ramrootfstype}\0" \ -- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ -- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ -- "mmcloados=run mmcargs; " \ -- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -- "if run loadfdt; then " \ -- "bootz ${loadaddr} - ${fdtaddr}; " \ -- "else " \ -- "if test ${boot_fdt} = try; then " \ -- "bootz; " \ -- "else " \ -- "echo WARN: Cannot load the DT; " \ -- "fi; " \ -- "fi; " \ -- "else " \ -- "bootz; " \ -- "fi;\0" \ -- "mmcboot=mmc dev ${mmcdev}; " \ -- "if mmc rescan; then " \ -- "echo SD/MMC found on device ${mmcdev};" \ -- "if run loadbootscript; then " \ -- "run bootscript;" \ -- "else " \ -- "if run loadbootenv; then " \ -- "echo Loaded environment from ${bootenv};" \ -- "run importbootenv;" \ -+ "${cape_disable} " \ -+ "${cape_enable} " \ -+ "root=${root} " \ -+ "${cmdline}\0" \ -+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ -+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ -+ "mmcboot=usb start;" \ -+ "for devtype in mmc usb; do " \ -+ "for devnum in 0 1; do " \ -+ "if ${devtype} dev ${devnum}; then " \ -+ "echo ${devtype} found on device ${devnum};" \ -+ "setenv bootpart ${devnum}:1;" \ -+ "part uuid ${devtype} ${bootpart} uuid;" \ -+ "setenv root PARTUUID=${uuid} rw rootwait fixrtc;" \ -+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \ -+ "gpio set 54;" \ -+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \ -+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \ -+ "if test -n ${cape}; then " \ -+ "if test -e ${devtype} ${bootpart} ${fdtdir}/${fdtbase}-${cape}.dtb; then " \ -+ "setenv fdtfile ${fdtbase}-${cape}.dtb; " \ -+ "fi; " \ -+ "echo using: $fdtfile...; " \ -+ "fi; " \ -+ "echo Checking if uenvcmd is set ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "fi;" \ -+ "gpio set 55;" \ -+ "run scan_dev_for_boot;" \ -+ "if run loadimage; then " \ -+ "run mmcargs;" \ -+ "if run loadfdt; then " \ -+ "gpio set 56;" \ -+ "if run loadrd; then " \ -+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ -+ "else " \ -+ "bootz ${loadaddr} - ${fdtaddr};" \ -+ "fi;" \ -+ "fi;" \ -+ "else " \ -+ "echo No kernel found;" \ -+ "fi;" \ -+ "gpio clear 54; gpio clear 55;" \ -+ "setexpr devnum ${devnum} + 1;" \ - "fi;" \ -- "if test -n $uenvcmd; then " \ -- "echo Running uenvcmd ...;" \ -- "run uenvcmd;" \ -- "fi;" \ -- "if run loadimage; then " \ -- "run mmcloados;" \ -- "fi;" \ -- "fi ;" \ -- "fi;\0" \ -- "spiboot=echo Booting from spi ...; " \ -- "run spiargs; " \ -- "sf probe ${spibusno}:0; " \ -- "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \ -- "bootz ${loadaddr}\0" \ -- "netboot=echo Booting from network ...; " \ -- "setenv autoload no; " \ -- "dhcp; " \ -- "tftp ${loadaddr} ${bootfile}; " \ -- "tftp ${fdtaddr} ${fdtfile}; " \ -- "run netargs; " \ -- "bootz ${loadaddr} - ${fdtaddr}\0" \ -- "ramboot=echo Booting from ramdisk ...; " \ -- "run ramargs; " \ -- "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ -+ "done;" \ -+ "done;\0" \ - "findfdt="\ - "if test $board_name = A335BONE; then " \ -- "setenv fdtfile am335x-bone.dtb; fi; " \ -+ "setenv fdtfile am335x-bone.dtb; setenv fdtbase am335x-bone; fi; " \ - "if test $board_name = A335BNLT; then " \ -- "setenv fdtfile am335x-boneblack.dtb; fi; " \ -+ "setenv fdtfile am335x-boneblack.dtb; setenv fdtbase am335x-boneblack; setenv umsmedia 1; fi; " \ - "if test $board_name = A33515BB; then " \ - "setenv fdtfile am335x-evm.dtb; fi; " \ - "if test $board_name = A335X_SK; then " \ -@@ -185,12 +166,11 @@ - #endif - - #define CONFIG_BOOTCOMMAND \ -- "run findfdt; " \ -- "run mmcboot;" \ -- "setenv mmcdev 1; " \ -- "setenv bootpart 1:2; " \ -+ "gpio set 53;" \ -+ "run findfdt;" \ - "run mmcboot;" \ -- "run nandboot;" -+ "gpio clear 54; gpio clear 55;" \ -+ "gpio set 56" - - /* NS16550 Configuration */ - #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ -@@ -329,9 +309,8 @@ - #endif - - #ifdef CONFIG_MUSB_GADGET --#define CONFIG_USB_ETHER --#define CONFIG_USB_ETH_RNDIS --#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" -+#define CONFIG_CMD_USB_MASS_STORAGE -+#define CONFIG_USB_GADGET_MASS_STORAGE - - /* USB TI's IDs */ - #define CONFIG_G_DNL_VENDOR_NUM 0x0451 diff --git a/libre/uboot4extlinux-am335x_bone/PKGBUILD b/libre/uboot4extlinux-am335x_bone/PKGBUILD deleted file mode 100644 index f1436af02..000000000 --- a/libre/uboot4extlinux-am335x_bone/PKGBUILD +++ /dev/null @@ -1,53 +0,0 @@ -# U-Boot: BeagleBone and BeagleBone Black -# Maintainer: André Silva -# Contributor: Jookia <166291@gmail.com> -# Contributor: Márcio Silva - -buildarch=4 - -pkgname=uboot4extlinux-am335x_bone -pkgver=2015.04 -pkgrel=1 -pkgdesc="U-Boot with Extlinux support for BeagleBone and BeagleBone Black" -arch=('armv7h') -url="http://git.denx.de/u-boot.git/" -replaces=('uboot-beaglebone-linux-libre' 'uboot-beaglebone-linux-libre-lts' - 'uboot-beaglebone-linux-libre-grsec' 'uboot-beaglebone-linux-libre-pck' - 'uboot-beaglebone' 'uboot-am335x_bone') -conflicts=('uboot-beaglebone-linux-libre' 'uboot-beaglebone-linux-libre-lts' - 'uboot-beaglebone-linux-libre-grsec' 'uboot-beaglebone-linux-libre-pck' - 'uboot-beaglebone' 'uboot-am335x_bone' 'uboot4grub-am335x_bone') -makedepends=('bc') -license=('GPL') -backup=(boot/extlinux/extlinux.conf) -install=${pkgname}.install -source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2" - '0001-parabola-arm-modifications.patch' - 'extlinux.conf' - 'uEnv.txt') -md5sums=('570bdc2c47270c2a98ca60ff6c5c74cd' - '37784c8f8f52a615d65e775018d237fb' - '068f6b4e8047115e73f29af5f384889b' - 'ccb79775b81654e16fca18825c7f2506') - -prepare() { - cd u-boot-${pkgver} - patch -Np1 -i ../0001-parabola-arm-modifications.patch -} - -build() { - cd u-boot-${pkgver} - - unset CFLAGS CXXFLAGS LDFLAGS - - make distclean - make am335x_evm_config - make -} - -package() { - cd u-boot-${pkgver} - mkdir -p "${pkgdir}"/boot/extlinux - cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot - cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux -} diff --git a/libre/uboot4extlinux-am335x_bone/extlinux.conf b/libre/uboot4extlinux-am335x_bone/extlinux.conf deleted file mode 100644 index 52de94d49..000000000 --- a/libre/uboot4extlinux-am335x_bone/extlinux.conf +++ /dev/null @@ -1,46 +0,0 @@ -menu title Welcome to U-Boot with Extlinux support! - -label Parabola GNU/Linux-libre, linux-libre kernel - kernel /boot/vmlinuz-linux-libre - append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 - fdtdir /boot/dtbs/linux-libre - -#label Parabola GNU/Linux-libre, linux-libre-lts kernel -# kernel /boot/vmlinuz-linux-libre-lts -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-lts - -#label Parabola GNU/Linux-libre, linux-libre-knock kernel -# kernel /boot/vmlinuz-linux-libre-knock -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-knock - -#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel -# kernel /boot/vmlinuz-linux-libre-lts-knock -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-lts-knock - -#label Parabola GNU/Linux-libre, linux-libre-grsec kernel -# kernel /boot/vmlinuz-linux-libre-grsec -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-grsec - -#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel -# kernel /boot/vmlinuz-linux-libre-grsec-knock -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-grsec-knock - -#label Parabola GNU/Linux-libre, linux-libre-audit kernel -# kernel /boot/vmlinuz-linux-libre-audit -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-audit - -#label Parabola GNU/Linux-libre, linux-libre-pck kernel -# kernel /boot/vmlinuz-linux-libre-pck -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-pck - -#label Parabola GNU/Linux-libre, linux-libre-rt kernel -# kernel /boot/vmlinuz-linux-libre-rt -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-rt diff --git a/libre/uboot4extlinux-am335x_bone/uEnv.txt b/libre/uboot4extlinux-am335x_bone/uEnv.txt deleted file mode 100644 index f432efc6b..000000000 --- a/libre/uboot4extlinux-am335x_bone/uEnv.txt +++ /dev/null @@ -1 +0,0 @@ -optargs=coherent_pool=1M diff --git a/libre/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install b/libre/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install deleted file mode 100644 index 4467c694e..000000000 --- a/libre/uboot4extlinux-am335x_bone/uboot4extlinux-am335x_bone.install +++ /dev/null @@ -1,37 +0,0 @@ -flash_instructions() { - echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k" - echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k" -} - -extlinux_warning() { - echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf" -} - -flash_uboot() { - root=$(mount | awk '/ on \/ / { print $1; }') - if [[ $root =~ ^/dev/mmcblk.*$ ]]; then - root=${root:0:12} - echo "A new U-Boot version needs to be flashed onto $root." - echo "Do this now? [y|N]" - read -r shouldwe - if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then - dd if=/boot/MLO of=$root count=1 seek=1 conv=notrunc bs=128k - dd if=/boot/u-boot.img of=$root count=2 seek=1 conv=notrunc bs=384k - else - echo "You can do this later by running:" - flash_instructions - fi - else - echo "Flash the new U-Boot version onto your boot device. For example:" - flash_instructions - fi - extlinux_warning -} - -post_install() { - flash_uboot -} - -post_upgrade() { - flash_uboot -} diff --git a/libre/uboot4extlinux-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch b/libre/uboot4extlinux-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch deleted file mode 100644 index bdb6699e6..000000000 --- a/libre/uboot4extlinux-chiliboard/0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch +++ /dev/null @@ -1,93 +0,0 @@ -From 0a3f119b5221e16feb1cbe4036cc16d1dc4c194c Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Sat, 7 Feb 2015 22:52:40 +0100 -Subject: [PATCH 1/6] Add linux/compiler-gcc5.h to fix builds with gcc5 - -Add linux/compiler-gcc5/h from the kernel sources at: - -commit 5631b8fba640a4ab2f8a954f63a603fa34eda96b -Author: Steven Noonan -Date: Sat Oct 25 15:09:42 2014 -0700 - - compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles - -Signed-off-by: Hans de Goede ---- - include/linux/compiler-gcc5.h | 65 +++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 65 insertions(+) - create mode 100644 include/linux/compiler-gcc5.h - -diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h -new file mode 100644 -index 0000000..c8c5659 ---- /dev/null -+++ b/include/linux/compiler-gcc5.h -@@ -0,0 +1,65 @@ -+#ifndef __LINUX_COMPILER_H -+#error "Please don't include directly, include instead." -+#endif -+ -+#define __used __attribute__((__used__)) -+#define __must_check __attribute__((warn_unused_result)) -+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b) -+ -+/* Mark functions as cold. gcc will assume any path leading to a call -+ to them will be unlikely. This means a lot of manual unlikely()s -+ are unnecessary now for any paths leading to the usual suspects -+ like BUG(), printk(), panic() etc. [but let's keep them for now for -+ older compilers] -+ -+ Early snapshots of gcc 4.3 don't support this and we can't detect this -+ in the preprocessor, but we can live with this because they're unreleased. -+ Maketime probing would be overkill here. -+ -+ gcc also has a __attribute__((__hot__)) to move hot functions into -+ a special section, but I don't see any sense in this right now in -+ the kernel context */ -+#define __cold __attribute__((__cold__)) -+ -+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) -+ -+#ifndef __CHECKER__ -+# define __compiletime_warning(message) __attribute__((warning(message))) -+# define __compiletime_error(message) __attribute__((error(message))) -+#endif /* __CHECKER__ */ -+ -+/* -+ * Mark a position in code as unreachable. This can be used to -+ * suppress control flow warnings after asm blocks that transfer -+ * control elsewhere. -+ * -+ * Early snapshots of gcc 4.5 don't support this and we can't detect -+ * this in the preprocessor, but we can live with this because they're -+ * unreleased. Really, we need to have autoconf for the kernel. -+ */ -+#define unreachable() __builtin_unreachable() -+ -+/* Mark a function definition as prohibited from being cloned. */ -+#define __noclone __attribute__((__noclone__)) -+ -+/* -+ * Tell the optimizer that something else uses this function or variable. -+ */ -+#define __visible __attribute__((externally_visible)) -+ -+/* -+ * GCC 'asm goto' miscompiles certain code sequences: -+ * -+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 -+ * -+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. -+ * -+ * (asm goto is automatically volatile - the naming reflects this.) -+ */ -+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) -+ -+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP -+#define __HAVE_BUILTIN_BSWAP32__ -+#define __HAVE_BUILTIN_BSWAP64__ -+#define __HAVE_BUILTIN_BSWAP16__ -+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ --- -2.5.0 - diff --git a/libre/uboot4extlinux-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch b/libre/uboot4extlinux-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch deleted file mode 100644 index 6ec3d82fc..000000000 --- a/libre/uboot4extlinux-chiliboard/0002-ARM-asm-io.h-use-static-inline.patch +++ /dev/null @@ -1,76 +0,0 @@ -From a29b67a36a2b59acfc9cb7adc6e3bc06c490d4ee Mon Sep 17 00:00:00 2001 -From: Jeroen Hofstee -Date: Sun, 22 Jun 2014 23:10:39 +0200 -Subject: [PATCH 2/6] ARM:asm:io.h use static inline - -When compiling u-boot with W=1 the extern inline void for -read* is likely causing the most noise. gcc / clang will -warn there is never a actual declaration for these functions. -Instead of declaring these extern make them static inline so -it is actually declared. - -cc: Albert ARIBAUD -Signed-off-by: Jeroen Hofstee ---- - arch/arm/include/asm/io.h | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - -diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h -index 214f3ea..dc6138a 100644 ---- a/arch/arm/include/asm/io.h -+++ b/arch/arm/include/asm/io.h -@@ -77,7 +77,7 @@ static inline phys_addr_t virt_to_phys(void * vaddr) - #define __arch_putl(v,a) (*(volatile unsigned int *)(a) = (v)) - #define __arch_putq(v,a) (*(volatile unsigned long long *)(a) = (v)) - --extern inline void __raw_writesb(unsigned long addr, const void *data, -+static inline void __raw_writesb(unsigned long addr, const void *data, - int bytelen) - { - uint8_t *buf = (uint8_t *)data; -@@ -85,7 +85,7 @@ extern inline void __raw_writesb(unsigned long addr, const void *data, - __arch_putb(*buf++, addr); - } - --extern inline void __raw_writesw(unsigned long addr, const void *data, -+static inline void __raw_writesw(unsigned long addr, const void *data, - int wordlen) - { - uint16_t *buf = (uint16_t *)data; -@@ -93,7 +93,7 @@ extern inline void __raw_writesw(unsigned long addr, const void *data, - __arch_putw(*buf++, addr); - } - --extern inline void __raw_writesl(unsigned long addr, const void *data, -+static inline void __raw_writesl(unsigned long addr, const void *data, - int longlen) - { - uint32_t *buf = (uint32_t *)data; -@@ -101,21 +101,21 @@ extern inline void __raw_writesl(unsigned long addr, const void *data, - __arch_putl(*buf++, addr); - } - --extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen) -+static inline void __raw_readsb(unsigned long addr, void *data, int bytelen) - { - uint8_t *buf = (uint8_t *)data; - while(bytelen--) - *buf++ = __arch_getb(addr); - } - --extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen) -+static inline void __raw_readsw(unsigned long addr, void *data, int wordlen) - { - uint16_t *buf = (uint16_t *)data; - while(wordlen--) - *buf++ = __arch_getw(addr); - } - --extern inline void __raw_readsl(unsigned long addr, void *data, int longlen) -+static inline void __raw_readsl(unsigned long addr, void *data, int longlen) - { - uint32_t *buf = (uint32_t *)data; - while(longlen--) --- -2.5.0 - diff --git a/libre/uboot4extlinux-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch b/libre/uboot4extlinux-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch deleted file mode 100644 index baf1efd5d..000000000 --- a/libre/uboot4extlinux-chiliboard/0003-common-main.c-make-show_boot_progress-__weak.patch +++ /dev/null @@ -1,31 +0,0 @@ -From dc7efb77bbd59224855713a554bb3721568a85c6 Mon Sep 17 00:00:00 2001 -From: Jeroen Hofstee -Date: Thu, 26 Jun 2014 20:18:31 +0200 -Subject: [PATCH 3/6] common: main.c: make show_boot_progress __weak - -This not only looks a bit better it also prevents a -warning with W=1 (no previous prototype). - -Signed-off-by: Jeroen Hofstee -Acked-by: Simon Glass ---- - common/main.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - -diff --git a/common/main.c b/common/main.c -index 32618f1..2979fbe 100644 ---- a/common/main.c -+++ b/common/main.c -@@ -17,8 +17,7 @@ DECLARE_GLOBAL_DATA_PTR; - /* - * Board-specific Platform code can reimplement show_boot_progress () if needed - */ --void inline __show_boot_progress (int val) {} --void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress"))); -+__weak void show_boot_progress(int val) {} - - static void modem_init(void) - { --- -2.5.0 - diff --git a/libre/uboot4extlinux-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch b/libre/uboot4extlinux-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch deleted file mode 100644 index f2237a229..000000000 --- a/libre/uboot4extlinux-chiliboard/0004-common-board_f-cosmetic-use-__weak-for-leds.patch +++ /dev/null @@ -1,109 +0,0 @@ -From ea9b2d003712ae2c6158abb5c9f285f593e8fcb0 Mon Sep 17 00:00:00 2001 -From: Jeroen Hofstee -Date: Mon, 23 Jun 2014 23:20:19 +0200 -Subject: [PATCH 4/6] common: board_f: cosmetic use __weak for leds - -First of all this looks a lot better, but it also -prevents a gcc warning (W=1), that the weak function -has no previous prototype. - -cc: Simon Glass -Signed-off-by: Jeroen Hofstee -Acked-by: Simon Glass ---- - common/board_f.c | 29 ++++++++++------------------- - include/status_led.h | 22 +++++++++++----------- - 2 files changed, 21 insertions(+), 30 deletions(-) - -diff --git a/common/board_f.c b/common/board_f.c -index 4ea4cb2..bdab38e 100644 ---- a/common/board_f.c -+++ b/common/board_f.c -@@ -37,6 +37,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -78,25 +79,15 @@ DECLARE_GLOBAL_DATA_PTR; - ************************************************************************ - * May be supplied by boards if desired - */ --inline void __coloured_LED_init(void) {} --void coloured_LED_init(void) -- __attribute__((weak, alias("__coloured_LED_init"))); --inline void __red_led_on(void) {} --void red_led_on(void) __attribute__((weak, alias("__red_led_on"))); --inline void __red_led_off(void) {} --void red_led_off(void) __attribute__((weak, alias("__red_led_off"))); --inline void __green_led_on(void) {} --void green_led_on(void) __attribute__((weak, alias("__green_led_on"))); --inline void __green_led_off(void) {} --void green_led_off(void) __attribute__((weak, alias("__green_led_off"))); --inline void __yellow_led_on(void) {} --void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on"))); --inline void __yellow_led_off(void) {} --void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off"))); --inline void __blue_led_on(void) {} --void blue_led_on(void) __attribute__((weak, alias("__blue_led_on"))); --inline void __blue_led_off(void) {} --void blue_led_off(void) __attribute__((weak, alias("__blue_led_off"))); -+__weak void coloured_LED_init(void) {} -+__weak void red_led_on(void) {} -+__weak void red_led_off(void) {} -+__weak void green_led_on(void) {} -+__weak void green_led_off(void) {} -+__weak void yellow_led_on(void) {} -+__weak void yellow_led_off(void) {} -+__weak void blue_led_on(void) {} -+__weak void blue_led_off(void) {} - - /* - * Why is gd allocated a register? Prior to reloc it might be better to -diff --git a/include/status_led.h b/include/status_led.h -index 0eb91b8..b8aaaf7 100644 ---- a/include/status_led.h -+++ b/include/status_led.h -@@ -272,19 +272,21 @@ extern void __led_set (led_id_t mask, int state); - # include - #endif - -+#endif /* CONFIG_STATUS_LED */ -+ - /* - * Coloured LEDs API - */ - #ifndef __ASSEMBLY__ --extern void coloured_LED_init (void); --extern void red_led_on(void); --extern void red_led_off(void); --extern void green_led_on(void); --extern void green_led_off(void); --extern void yellow_led_on(void); --extern void yellow_led_off(void); --extern void blue_led_on(void); --extern void blue_led_off(void); -+void coloured_LED_init(void); -+void red_led_on(void); -+void red_led_off(void); -+void green_led_on(void); -+void green_led_off(void); -+void yellow_led_on(void); -+void yellow_led_off(void); -+void blue_led_on(void); -+void blue_led_off(void); - #else - .extern LED_init - .extern red_led_on -@@ -297,6 +299,4 @@ extern void blue_led_off(void); - .extern blue_led_off - #endif - --#endif /* CONFIG_STATUS_LED */ -- - #endif /* _STATUS_LED_H_ */ --- -2.5.0 - diff --git a/libre/uboot4extlinux-chiliboard/0005-chiliboard-support.patch b/libre/uboot4extlinux-chiliboard/0005-chiliboard-support.patch deleted file mode 100644 index cbe029a69..000000000 --- a/libre/uboot4extlinux-chiliboard/0005-chiliboard-support.patch +++ /dev/null @@ -1,1685 +0,0 @@ -From 22efc5d711cf5a91a236b3a54f94cbcad0fc7b5e Mon Sep 17 00:00:00 2001 -From: Kevin Mihelich -Date: Sat, 29 Aug 2015 08:56:32 -0600 -Subject: [PATCH 5/6] chiliboard support - ---- - board/grinn/chiliboard/Makefile | 13 + - board/grinn/chiliboard/board.c | 447 +++++++++++++++++++ - board/grinn/chiliboard/board.h | 20 + - board/grinn/chiliboard/mux.c | 99 +++++ - board/grinn/chiliboard/u-boot.lds | 131 ++++++ - boards.cfg | 5 + - drivers/mtd/nand/omap_gpmc.c | 6 +- - include/configs/chiliboard.h | 878 ++++++++++++++++++++++++++++++++++++++ - 8 files changed, 1597 insertions(+), 2 deletions(-) - create mode 100644 board/grinn/chiliboard/Makefile - create mode 100644 board/grinn/chiliboard/board.c - create mode 100644 board/grinn/chiliboard/board.h - create mode 100644 board/grinn/chiliboard/mux.c - create mode 100644 board/grinn/chiliboard/u-boot.lds - create mode 100644 include/configs/chiliboard.h - -diff --git a/board/grinn/chiliboard/Makefile b/board/grinn/chiliboard/Makefile -new file mode 100644 -index 0000000..804ac37 ---- /dev/null -+++ b/board/grinn/chiliboard/Makefile -@@ -0,0 +1,13 @@ -+# -+# Makefile -+# -+# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ -+# -+# SPDX-License-Identifier: GPL-2.0+ -+# -+ -+ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),) -+obj-y := mux.o -+endif -+ -+obj-y += board.o -diff --git a/board/grinn/chiliboard/board.c b/board/grinn/chiliboard/board.c -new file mode 100644 -index 0000000..ed8ab63 ---- /dev/null -+++ b/board/grinn/chiliboard/board.c -@@ -0,0 +1,447 @@ -+/* -+ * board.c -+ * -+ * Board functions for Grinn chiliboard, AM335X based boards -+ * -+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ -+ * -+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com -+ * Grzegorz Glomb, g.glomb@grinn-global.com -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include "board.h" -+ -+DECLARE_GLOBAL_DATA_PTR; -+#define HDR_NAME_LEN 8 -+ -+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; -+ -+#ifndef CONFIG_SKIP_LOWLEVEL_INIT -+static const struct ddr_data ddr2_chilisom_gcs1_data = { -+ .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) | -+ (MT47H128M16RT25E_RD_DQS<<20) | -+ (MT47H128M16RT25E_RD_DQS<<10) | -+ (MT47H128M16RT25E_RD_DQS<<0)), -+ .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) | -+ (MT47H128M16RT25E_WR_DQS<<20) | -+ (MT47H128M16RT25E_WR_DQS<<10) | -+ (MT47H128M16RT25E_WR_DQS<<0)), -+ .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) | -+ (MT47H128M16RT25E_PHY_WRLVL<<20) | -+ (MT47H128M16RT25E_PHY_WRLVL<<10) | -+ (MT47H128M16RT25E_PHY_WRLVL<<0)), -+ .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) | -+ (MT47H128M16RT25E_PHY_GATELVL<<20) | -+ (MT47H128M16RT25E_PHY_GATELVL<<10) | -+ (MT47H128M16RT25E_PHY_GATELVL<<0)), -+ .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) | -+ (MT47H128M16RT25E_PHY_FIFO_WE<<20) | -+ (MT47H128M16RT25E_PHY_FIFO_WE<<10) | -+ (MT47H128M16RT25E_PHY_FIFO_WE<<0)), -+ .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) | -+ (MT47H128M16RT25E_PHY_WR_DATA<<20) | -+ (MT47H128M16RT25E_PHY_WR_DATA<<10) | -+ (MT47H128M16RT25E_PHY_WR_DATA<<0)), -+}; -+ -+static const struct cmd_control ddr2_chilisom_gcs1_cmd_ctrl_data = { -+ .cmd0csratio = MT47H128M16RT25E_RATIO, -+ .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT, -+ -+ .cmd1csratio = MT47H128M16RT25E_RATIO, -+ .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT, -+ -+ .cmd2csratio = MT47H128M16RT25E_RATIO, -+ .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT, -+}; -+ -+static const struct emif_regs ddr2_chilisom_gcs1_emif_reg_data = { -+ .sdram_config = MT47H128M16RT25E_EMIF_SDCFG, -+ .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF, -+ .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1, -+ .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2, -+ .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3, -+ .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY, -+}; -+ -+static const struct ddr_data ddr3_chilisom_gcs2_data = { -+ .datardsratio0 = MT41K256M16HA125E_RD_DQS, -+ .datawdsratio0 = MT41K256M16HA125E_WR_DQS, -+ .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, -+ .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, -+}; -+ -+static const struct cmd_control ddr3_chilisom_gcs2_cmd_ctrl_data = { -+ .cmd0csratio = MT41K256M16HA125E_RATIO, -+ .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, -+ -+ .cmd1csratio = MT41K256M16HA125E_RATIO, -+ .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, -+ -+ .cmd2csratio = MT41K256M16HA125E_RATIO, -+ .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, -+}; -+ -+static struct emif_regs ddr3_chilisom_gcs2_emif_reg_data = { -+ .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, -+ .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, -+ .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, -+ .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, -+ .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, -+ .zq_config = MT41K256M16HA125E_ZQ_CFG, -+ .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY, -+}; -+ -+#ifdef CONFIG_SPL_OS_BOOT -+int spl_start_uboot(void) -+{ -+ /* break into full u-boot on 'c' */ -+ if (serial_tstc() && serial_getc() == 'c') -+ return 1; -+ -+#ifdef CONFIG_SPL_ENV_SUPPORT -+ env_init(); -+ env_relocate_spec(); -+ if (getenv_yesno("boot_os") != 1) -+ return 1; -+#endif -+ -+ return 0; -+} -+#endif -+ -+#define OSC (V_OSCK/1000000) -+const struct dpll_params dpll_ddr_chilisom_gcs1 = { -+ 266, OSC-1, 1, -1, -1, -1, -1}; -+const struct dpll_params dpll_ddr_chilisom_gcs2 = { -+ 400, OSC-1, 1, -1, -1, -1, -1}; -+ -+void am33xx_spl_board_init(void) -+{ -+ int mpu_vdd; -+ -+ dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); -+ -+ int usb_cur_lim; -+ -+ if (i2c_probe(TPS65217_CHIP_PM)) -+ return; -+ -+ uchar pmic_status_reg; -+ if (tps65217_reg_read(TPS65217_STATUS, &pmic_status_reg)) -+ return; -+ if (!(pmic_status_reg & TPS65217_PWR_SRC_AC_BITMASK)) { -+ puts("No AC power, disabling frequency switch\n"); -+ return; -+ } -+ -+ /* -+ * Increase USB current limit to 1300mA or 1800mA and set -+ * the MPU voltage controller as needed. -+ */ -+ if (dpll_mpu_opp100.m == MPUPLL_M_1000) { -+ usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA; -+ mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV; -+ } else { -+ usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA; -+ mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV; -+ } -+ -+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, -+ TPS65217_POWER_PATH, -+ usb_cur_lim, -+ TPS65217_USB_INPUT_CUR_LIMIT_MASK)) -+ puts("tps65217_reg_write failure\n"); -+ -+ /* Set DCDC3 (CORE) voltage to 1.125V */ -+ if (tps65217_voltage_update(TPS65217_DEFDCDC3, -+ TPS65217_DCDC_VOLT_SEL_1125MV)) { -+ puts("tps65217_voltage_update failure\n"); -+ return; -+ } -+ -+ do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); -+ if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) { -+ puts("tps65217_voltage_update failure\n"); -+ return; -+ } -+ -+ /* Set LDO3, LDO4 output voltage to 3.3V for GCS1. -+ * Set LDO3 to 1.8V and LDO4 to 3.3V for GCS2. */ -+ -+ #ifdef CONFIG_CHILISOM_GCS2 -+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, -+ TPS65217_DEFLS1, -+ TPS65217_LDO_VOLTAGE_OUT_1_8, -+ TPS65217_LDO_MASK)) -+ puts("tps65217_reg_write failure\n"); -+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, -+ TPS65217_DEFLS2, -+ TPS65217_LDO_VOLTAGE_OUT_3_3, -+ TPS65217_LDO_MASK)) -+ puts("tps65217_reg_write failure\n"); -+ #else -+ -+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, -+ TPS65217_DEFLS1, -+ TPS65217_LDO_VOLTAGE_OUT_3_3, -+ TPS65217_LDO_MASK)) -+ puts("tps65217_reg_write failure\n"); -+ if (tps65217_reg_write(TPS65217_PROT_LEVEL_2, -+ TPS65217_DEFLS2, -+ TPS65217_LDO_VOLTAGE_OUT_3_3, -+ TPS65217_LDO_MASK)) -+ puts("tps65217_reg_write failure\n"); -+ #endif -+ -+ do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); -+} -+ -+const struct dpll_params *get_dpll_ddr_params(void) -+{ -+ enable_i2c0_pin_mux(); -+ i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); -+ -+#ifndef CONFIG_CHILISOM_GCS2 -+ return &dpll_ddr_chilisom_gcs1; -+#else -+ return &dpll_ddr_chilisom_gcs2; -+#endif -+} -+ -+void set_uart_mux_conf(void) -+{ -+#ifdef CONFIG_SERIAL1 -+ enable_uart0_pin_mux(); -+#endif /* CONFIG_SERIAL1 */ -+} -+ -+void set_mux_conf_regs(void) -+{ -+ enable_board_pin_mux(); -+} -+ -+const struct ctrl_ioregs ioregs_chilisom_gcs1 = { -+ .cm0ioctl = MT47H128M16RT25E_IOCTRL_VALUE, -+ .cm1ioctl = MT47H128M16RT25E_IOCTRL_VALUE, -+ .cm2ioctl = MT47H128M16RT25E_IOCTRL_VALUE, -+ .dt0ioctl = MT47H128M16RT25E_IOCTRL_VALUE, -+ .dt1ioctl = MT47H128M16RT25E_IOCTRL_VALUE, -+}; -+ -+const struct ctrl_ioregs ioregs_chilisom_gcs2 = { -+ .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, -+ .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, -+ .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE, -+ .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, -+ .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, -+}; -+ -+void sdram_init(void) -+{ -+#ifndef CONFIG_CHILISOM_GCS2 -+ config_ddr(266, &ioregs_chilisom_gcs1, -+ &ddr2_chilisom_gcs1_data, -+ &ddr2_chilisom_gcs1_cmd_ctrl_data, -+ &ddr2_chilisom_gcs1_emif_reg_data, 0); -+#else -+ config_ddr(400, &ioregs_chilisom_gcs2, -+ &ddr3_chilisom_gcs2_data, -+ &ddr3_chilisom_gcs2_cmd_ctrl_data, -+ &ddr3_chilisom_gcs2_emif_reg_data, 0); -+#endif -+} -+#endif -+ -+/* -+ * Basic board specific setup. Pinmux has been handled already. -+ */ -+int board_init(void) -+{ -+#if defined(CONFIG_HW_WATCHDOG) -+ hw_watchdog_init(); -+#endif -+ -+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; -+#if defined(CONFIG_NOR) || defined(CONFIG_NAND) -+ gpmc_init(); -+#endif -+ return 0; -+} -+ -+#ifdef CONFIG_BOARD_LATE_INIT -+int board_late_init(void) -+{ -+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG -+ char safe_string[HDR_NAME_LEN + 1]; -+ -+ /* Now set variables based on the header. */ -+ strncpy(safe_string, (char *)"CHILISOM", 8); -+ safe_string[8] = 0; -+ setenv("board_name", safe_string); -+ -+#ifndef CONFIG_CHILISOM_GCS2 -+ strncpy(safe_string, (char *)"1.1", 3); -+ safe_string[3] = 0; -+ setenv("board_rev", safe_string); -+#else -+ strncpy(safe_string, (char *)"2.2", 3); -+ safe_string[3] = 0; -+ setenv("board_rev", safe_string); -+#endif -+#endif -+ return 0; -+} -+#endif -+ -+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ -+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) -+static void cpsw_control(int enabled) -+{ -+ /* VTP can be added here */ -+ -+ return; -+} -+ -+static struct cpsw_slave_data cpsw_slaves[] = { -+ { -+ .slave_reg_ofs = 0x208, -+ .sliver_reg_ofs = 0xd80, -+ .phy_addr = 0, -+ }, -+ { -+ .slave_reg_ofs = 0x308, -+ .sliver_reg_ofs = 0xdc0, -+ .phy_addr = 1, -+ }, -+}; -+ -+static struct cpsw_platform_data cpsw_data = { -+ .mdio_base = CPSW_MDIO_BASE, -+ .cpsw_base = CPSW_BASE, -+ .mdio_div = 0xff, -+ .channels = 8, -+ .cpdma_reg_ofs = 0x800, -+ .slaves = 1, -+ .slave_data = cpsw_slaves, -+ .ale_reg_ofs = 0xd00, -+ .ale_entries = 1024, -+ .host_port_reg_ofs = 0x108, -+ .hw_stats_reg_ofs = 0x900, -+ .bd_ram_ofs = 0x2000, -+ .mac_control = (1 << 5), -+ .control = cpsw_control, -+ .host_port_num = 0, -+ .version = CPSW_CTRL_VERSION_2, -+}; -+#endif -+ -+/* -+ * This function will: -+ * Read the eFuse for MAC addresses, and set ethaddr/eth1addr/usbnet_devaddr -+ * in the environment -+ * Perform fixups to the PHY present on certain boards. We only need this -+ * function in: -+ * - SPL with either CPSW or USB ethernet support -+ * - Full U-Boot, with either CPSW or USB ethernet -+ * Build in only these cases to avoid warnings about unused variables -+ * when we build an SPL that has neither option but full U-Boot will. -+ */ -+ -+#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT)) \ -+ && defined(CONFIG_SPL_BUILD)) || \ -+ ((defined(CONFIG_DRIVER_TI_CPSW) || \ -+ defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \ -+ !defined(CONFIG_SPL_BUILD)) -+int board_eth_init(bd_t *bis) -+{ -+ int rv, n = 0; -+ uint8_t mac_addr[6]; -+ uint32_t mac_hi, mac_lo; -+ -+ /* try reading mac address from efuse */ -+ mac_lo = readl(&cdev->macid0l); -+ mac_hi = readl(&cdev->macid0h); -+ mac_addr[0] = mac_hi & 0xFF; -+ mac_addr[1] = (mac_hi & 0xFF00) >> 8; -+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16; -+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24; -+ mac_addr[4] = mac_lo & 0xFF; -+ mac_addr[5] = (mac_lo & 0xFF00) >> 8; -+ -+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ -+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) -+ if (!getenv("ethaddr")) { -+ printf(" not set. Validating first E-fuse MAC\n"); -+ -+ if (is_valid_ether_addr(mac_addr)) -+ eth_setenv_enetaddr("ethaddr", mac_addr); -+ } -+ -+#ifdef CONFIG_DRIVER_TI_CPSW -+ -+ mac_lo = readl(&cdev->macid1l); -+ mac_hi = readl(&cdev->macid1h); -+ mac_addr[0] = mac_hi & 0xFF; -+ mac_addr[1] = (mac_hi & 0xFF00) >> 8; -+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16; -+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24; -+ mac_addr[4] = mac_lo & 0xFF; -+ mac_addr[5] = (mac_lo & 0xFF00) >> 8; -+ -+ if (!getenv("eth1addr")) { -+ if (is_valid_ether_addr(mac_addr)) -+ eth_setenv_enetaddr("eth1addr", mac_addr); -+ } -+ -+ /* writel(MII_MODE_ENABLE, &cdev->miisel); */ -+ writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel); -+ -+ cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RMII; -+ -+ rv = cpsw_register(&cpsw_data); -+ if (rv < 0) -+ printf("Error %d registering CPSW switch\n", rv); -+ else -+ n += rv; -+#endif -+#endif -+#if defined(CONFIG_USB_ETHER) && \ -+ (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT)) -+ if (is_valid_ether_addr(mac_addr)) -+ eth_setenv_enetaddr("usbnet_devaddr", mac_addr); -+ -+ rv = usb_eth_initialize(bis); -+ if (rv < 0) -+ printf("Error %d registering USB_ETHER\n", rv); -+ else -+ n += rv; -+#endif -+ return n; -+} -+#endif -diff --git a/board/grinn/chiliboard/board.h b/board/grinn/chiliboard/board.h -new file mode 100644 -index 0000000..6753e74 ---- /dev/null -+++ b/board/grinn/chiliboard/board.h -@@ -0,0 +1,20 @@ -+/* -+ * board.h -+ * -+ * Grinn AM335x boards information header -+ * -+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ -+ * -+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com -+ * Grzegorz Glomb, g.glomb@grinn-global.com -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _BOARD_H_ -+#define _BOARD_H_ -+ -+void enable_uart0_pin_mux(void); -+void enable_i2c0_pin_mux(void); -+void enable_board_pin_mux(void); -+#endif -diff --git a/board/grinn/chiliboard/mux.c b/board/grinn/chiliboard/mux.c -new file mode 100644 -index 0000000..644f211 ---- /dev/null -+++ b/board/grinn/chiliboard/mux.c -@@ -0,0 +1,99 @@ -+/* -+ * mux.c -+ * -+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ -+ * -+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com -+ * Grzegorz Glomb, g.glomb@grinn-global.com -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include "board.h" -+ -+static struct module_pin_mux uart0_pin_mux[] = { -+ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ -+ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ -+ {-1}, -+}; -+ -+static struct module_pin_mux mmc0_pin_mux[] = { -+ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ -+ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ -+ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ -+ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ -+ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ -+ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ -+ {-1}, -+}; -+ -+static struct module_pin_mux i2c0_pin_mux[] = { -+ {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | -+ PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ -+ {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | -+ PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ -+ {-1}, -+}; -+ -+static struct module_pin_mux rmii1_pin_mux[] = { -+ {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS */ -+ {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */ -+ {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */ -+ {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */ -+ {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */ -+ {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */ -+ {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */ -+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ -+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ -+ {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */ -+ {-1}, -+}; -+ -+static struct module_pin_mux nand_pin_mux[] = { -+ {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ -+ {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ -+ {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ -+ {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ -+ {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ -+ {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ -+ {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ -+ {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ -+ {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ -+ {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ -+ {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ -+ {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ -+ {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ -+ {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ -+ {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ -+ {-1}, -+}; -+ -+void enable_uart0_pin_mux(void) -+{ -+ configure_module_pin_mux(uart0_pin_mux); -+} -+ -+void enable_i2c0_pin_mux(void) -+{ -+ configure_module_pin_mux(i2c0_pin_mux); -+} -+ -+void enable_board_pin_mux(void) -+{ -+ /* chiliboard pinmux */ -+ configure_module_pin_mux(rmii1_pin_mux); -+ configure_module_pin_mux(nand_pin_mux); -+ configure_module_pin_mux(mmc0_pin_mux); -+ -+#ifndef CONFIG_CHILISOM_GCS2 -+ puts("Configuration for Chilisom GCS1\n"); -+#else -+ puts("Configuration for Chilisom GCS2\n"); -+#endif -+} -diff --git a/board/grinn/chiliboard/u-boot.lds b/board/grinn/chiliboard/u-boot.lds -new file mode 100644 -index 0000000..bf70d88 ---- /dev/null -+++ b/board/grinn/chiliboard/u-boot.lds -@@ -0,0 +1,131 @@ -+/* -+ * Copyright (c) 2004-2008 Texas Instruments -+ * -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, -+ * -+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com -+ * Grzegorz Glomb, g.glomb@grinn-global.com -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ *(.__image_copy_start) -+ *(.vectors) -+ CPUDIR/start.o (.text*) -+ board/grinn/chiliboard/built-in.o (.text*) -+ *(.text*) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } -+ -+ . = ALIGN(4); -+ .data : { -+ *(.data*) -+ } -+ -+ . = ALIGN(4); -+ -+ . = .; -+ -+ . = ALIGN(4); -+ .u_boot_list : { -+ KEEP(*(SORT(.u_boot_list*))); -+ } -+ -+ . = ALIGN(4); -+ -+ .image_copy_end : -+ { -+ *(.__image_copy_end) -+ } -+ -+ .rel_dyn_start : -+ { -+ *(.__rel_dyn_start) -+ } -+ -+ .rel.dyn : { -+ *(.rel*) -+ } -+ -+ .rel_dyn_end : -+ { -+ *(.__rel_dyn_end) -+ } -+ -+ .hash : { *(.hash*) } -+ -+ .end : -+ { -+ *(.__end) -+ } -+ -+ _image_binary_end = .; -+ -+ /* -+ * Deprecated: this MMU section is used by pxa at present but -+ * should not be used by new boards/CPUs. -+ */ -+ . = ALIGN(4096); -+ .mmutable : { -+ *(.mmutable) -+ } -+ -+/* -+ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c -+ * __bss_base and __bss_limit are for linker only (overlay ordering) -+ */ -+ -+ .bss_start __rel_dyn_start (OVERLAY) : { -+ KEEP(*(.__bss_start)); -+ __bss_base = .; -+ } -+ -+ .bss __bss_base (OVERLAY) : { -+ *(.bss*) -+ . = ALIGN(4); -+ __bss_limit = .; -+ } -+ -+ .bss_end __bss_limit (OVERLAY) : { -+ KEEP(*(.__bss_end)); -+ } -+ -+ .dynsym _image_binary_end : { *(.dynsym) } -+ .dynbss : { *(.dynbss) } -+ .dynstr : { *(.dynstr*) } -+ .dynamic : { *(.dynamic*) } -+ .gnu.hash : { *(.gnu.hash) } -+ .plt : { *(.plt*) } -+ .interp : { *(.interp*) } -+ .gnu : { *(.gnu*) } -+ .ARM.exidx : { *(.ARM.exidx*) } -+} -diff --git a/boards.cfg b/boards.cfg -index 1ba2081..b432704 100644 ---- a/boards.cfg -+++ b/boards.cfg -@@ -258,6 +258,11 @@ Active arm armv7 am33xx BuR tseries - Active arm armv7 am33xx BuR tseries tseries_nand tseries:SERIAL1,CONS_INDEX=1,NAND Hannes Petermaier - Active arm armv7 am33xx BuR tseries tseries_spi tseries:SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT Hannes Petermaier - Active arm armv7 am33xx compulab cm_t335 cm_t335 - Igor Grinberg -+Active arm armv7 am33xx grinn chiliboard chiliboard_ram128m chiliboard:CHILISOM_GCS2,NAND,RAM128MB Grzegorz Glomb -+Active arm armv7 am33xx grinn chiliboard chiliboard_nand0m_ram128m chiliboard:CHILISOM_GCS2,RAM128MB Grzegorz Glomb -+Active arm armv7 am33xx grinn chiliboard chiliboard_nand512m chiliboard:CHILISOM_GCS2,NAND,NAND512MB Grzegorz Glomb -+Active arm armv7 am33xx grinn chiliboard chiliboard_nand0m chiliboard:CHILISOM_GCS2 Grzegorz Glomb -+Active arm armv7 am33xx grinn chiliboard chiliboard chiliboard:CHILISOM_GCS2,NAND Grzegorz Glomb - Active arm armv7 am33xx gumstix pepper pepper - Ash Charles - Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra - Active arm armv7 am33xx phytec pcm051 pcm051_rev1 pcm051:REV1 Lars Poeschel -diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c -index 1acf06b..0c9cde3 100644 ---- a/drivers/mtd/nand/omap_gpmc.c -+++ b/drivers/mtd/nand/omap_gpmc.c -@@ -478,11 +478,13 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, - oob += eccbytes) { - chip->ecc.hwctl(mtd, NAND_ECC_READ); - /* read data */ -- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page); -+ /* chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page); */ -+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, -1); - chip->read_buf(mtd, p, eccsize); - - /* read respective ecc from oob area */ -- chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page); -+ /* chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page); */ -+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1); - chip->read_buf(mtd, oob, eccbytes); - /* read syndrome */ - chip->ecc.calculate(mtd, p, &ecc_calc[i]); -diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h -new file mode 100644 -index 0000000..eacc9af ---- /dev/null -+++ b/include/configs/chiliboard.h -@@ -0,0 +1,878 @@ -+/* -+ * chiliboard.h -+ * -+ * Grinn chiliboard configuration header -+ * -+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ -+ * -+ * Copyright (C) 2015, Grinn - http://www.grinn-global.com -+ * Grzegorz Glomb, g.glomb@grinn-global.com -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef __CONFIG_CHILIBOARD_H -+#define __CONFIG_CHILIBOARD_H -+ -+#define CONFIG_AM33XX -+#define CONFIG_ARCH_CPU_INIT -+#define CONFIG_SYS_CACHELINE_SIZE 64 -+#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ -+#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ -+#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC -+ -+#include -+ -+/* NS16550 Configuration */ -+#define CONFIG_SYS_NS16550 -+#define CONFIG_SYS_NS16550_SERIAL -+#define CONFIG_SYS_NS16550_REG_SIZE (-4) -+#define CONFIG_SYS_NS16550_CLK 48000000 -+ -+/* Network defines. */ -+#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ -+#define CONFIG_CMD_DHCP -+#define CONFIG_CMD_MII -+#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ -+#define CONFIG_BOOTP_DNS2 -+#define CONFIG_BOOTP_SEND_HOSTNAME -+#define CONFIG_BOOTP_GATEWAY -+#define CONFIG_BOOTP_SUBNETMASK -+#define CONFIG_NET_RETRY_COUNT 10 -+#define CONFIG_CMD_PING -+#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ -+#define CONFIG_MII /* Required in net/eth.c */ -+ -+/* -+ * RTC related defines. To use bootcount you must set bootlimit in the -+ * environment to a non-zero value and enable CONFIG_BOOTCOUNT_LIMIT -+ * in the board config. -+ */ -+#define CONFIG_SYS_BOOTCOUNT_ADDR 0x44E3E000 -+ -+/* Enable the HW watchdog, since we can use this with bootcount */ -+#define CONFIG_HW_WATCHDOG -+#define CONFIG_OMAP_WATCHDOG -+ -+/* -+ * SPL related defines. The Public RAM memory map the ROM defines the -+ * area between 0x402F0400 and 0x4030B800 as a download area and -+ * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also -+ * supports X-MODEM loading via UART, and we leverage this and then use -+ * Y-MODEM to load u-boot.img, when booted over UART. -+ */ -+#define CONFIG_SPL_TEXT_BASE 0x402F0400 -+#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE) -+#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ -+ (128 << 20)) -+ -+/* Enable the watchdog inside of SPL */ -+#define CONFIG_SPL_WATCHDOG_SUPPORT -+ -+/* -+ * Since SPL did pll and ddr initialization for us, -+ * we don't need to do it twice. -+ */ -+#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT) -+#define CONFIG_SKIP_LOWLEVEL_INIT -+#endif -+ -+/* -+ * When building U-Boot such that there is no previous loader -+ * we need to call board_early_init_f. This is taken care of in -+ * s_init when we have SPL used. -+ */ -+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL) -+#define CONFIG_BOARD_EARLY_INIT_F -+#endif -+ -+#ifdef CONFIG_NAND -+#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ -+#endif -+ -+/* Common define for many platforms. */ -+#define CONFIG_OMAP -+#define CONFIG_OMAP_COMMON -+#define CONFIG_SYS_GENERIC_BOARD -+ -+/* -+ * We typically do not contain NOR flash. In the cases where we do, we -+ * undefine this later. -+ */ -+#define CONFIG_SYS_NO_FLASH -+ -+/* Support both device trees and ATAGs. */ -+#define CONFIG_OF_LIBFDT -+#define CONFIG_CMDLINE_TAG -+#define CONFIG_SETUP_MEMORY_TAGS -+#define CONFIG_INITRD_TAG -+ -+/* -+ * Our DDR memory always starts at 0x80000000 and U-Boot shall have -+ * relocated itself to higher in memory by the time this value is used. -+ * However, set this to a 32MB offset to allow for easier Linux kernel -+ * booting as the default is often used as the kernel load address. -+ */ -+#define CONFIG_SYS_LOAD_ADDR 0x82000000 -+ -+/* -+ * We setup defaults based on constraints from the Linux kernel, which should -+ * also be safe elsewhere. We have the default load at 32MB into DDR (for -+ * the kernel), FDT above 128MB (the maximum location for the end of the -+ * kernel), and the ramdisk 512KB above that (allowing for hopefully never -+ * seen large trees). We say all of this must be within the first 256MB -+ * as that will normally be within the kernel lowmem and thus visible via -+ * bootm_size and we only run on platforms with 256MB or more of memory. -+ */ -+#ifdef CONFIG_RAM128MB -+#define DEFAULT_LINUX_BOOT_ENV \ -+ "loadaddr=0x82000000\0" \ -+ "kernel_addr_r=0x82000000\0" \ -+ "fdtaddr=0x84000000\0" \ -+ "fdt_addr_r=0x84000000\0" \ -+ "rdaddr=0x84080000\0" \ -+ "ramdisk_addr_r=0x84080000\0" \ -+ "bootm_size=0x8000000\0" -+#else -+#define DEFAULT_LINUX_BOOT_ENV \ -+ "loadaddr=0x82000000\0" \ -+ "kernel_addr_r=0x82000000\0" \ -+ "fdtaddr=0x88000000\0" \ -+ "fdt_addr_r=0x88000000\0" \ -+ "rdaddr=0x88080000\0" \ -+ "ramdisk_addr_r=0x88080000\0" \ -+ "bootm_size=0x10000000\0" -+#endif -+ -+/* -+ * Default to a quick boot delay. -+ */ -+#define CONFIG_BOOTDELAY 1 -+ -+/* -+ * DDR information. If the CONFIG_NR_DRAM_BANKS is not defined, -+ * we say (for simplicity) that we have 1 bank, always, even when -+ * we have more. We always start at 0x80000000, and we place the -+ * initial stack pointer in our SRAM. Otherwise, we can define -+ * CONFIG_NR_DRAM_BANKS before including this file. -+ */ -+#ifndef CONFIG_NR_DRAM_BANKS -+#define CONFIG_NR_DRAM_BANKS 1 -+#endif -+#define CONFIG_SYS_SDRAM_BASE 0x80000000 -+#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ -+ GENERATED_GBL_DATA_SIZE) -+ -+/* Timer information. */ -+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -+ -+/* I2C IP block */ -+#define CONFIG_I2C -+#define CONFIG_CMD_I2C -+#define CONFIG_SYS_I2C -+#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -+#define CONFIG_SYS_I2C_OMAP24XX -+ -+/* MMC/SD IP block */ -+#define CONFIG_MMC -+#define CONFIG_GENERIC_MMC -+#define CONFIG_OMAP_HSMMC -+#define CONFIG_CMD_MMC -+ -+/* McSPI IP block */ -+#define CONFIG_SPI -+#define CONFIG_OMAP3_SPI -+#define CONFIG_CMD_SPI -+ -+/* GPIO block */ -+#define CONFIG_OMAP_GPIO -+#define CONFIG_CMD_GPIO -+ -+/* -+ * GPMC NAND block. We support 1 device and the physical address to -+ * access CS0 at is 0x8000000. -+ */ -+#ifdef CONFIG_NAND -+#define CONFIG_NAND_OMAP_GPMC -+#ifndef CONFIG_SYS_NAND_BASE -+#define CONFIG_SYS_NAND_BASE 0x8000000 -+#endif -+#define CONFIG_SYS_MAX_NAND_DEVICE 1 -+#define CONFIG_CMD_NAND -+#endif -+ -+/* -+ * The following are general good-enough settings for U-Boot. We set a -+ * large malloc pool as we generally have a lot of DDR, and we opt for -+ * function over binary size in the main portion of U-Boot as this is -+ * generally easily constrained later if needed. We enable the config -+ * options that give us information in the environment about what board -+ * we are on so we do not need to rely on the command prompt. We set a -+ * console baudrate of 115200 and use the default baud rate table. -+ */ -+#define CONFIG_SYS_MALLOC_LEN (16 << 20) -+#define CONFIG_SYS_HUSH_PARSER -+#define CONFIG_SYS_PROMPT "U-Boot# " -+#define CONFIG_SYS_CONSOLE_INFO_QUIET -+#define CONFIG_BAUDRATE 115200 -+#define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */ -+#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */ -+ -+/* As stated above, the following choices are optional. */ -+#define CONFIG_SYS_LONGHELP -+#define CONFIG_AUTO_COMPLETE -+#define CONFIG_CMDLINE_EDITING -+#define CONFIG_VERSION_VARIABLE -+ -+/* We set the max number of command args high to avoid HUSH bugs. */ -+#define CONFIG_SYS_MAXARGS 64 -+ -+/* Console I/O Buffer Size */ -+#define CONFIG_SYS_CBSIZE 512 -+/* Print Buffer Size */ -+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ -+ + sizeof(CONFIG_SYS_PROMPT) + 16) -+/* Boot Argument Buffer Size */ -+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -+ -+/* -+ * When we have SPI, NOR or NAND flash we expect to be making use of -+ * mtdparts, both for ease of use in U-Boot and for passing information -+ * on to the Linux kernel. -+ */ -+#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND) -+#define CONFIG_MTD_DEVICE /* Required for mtdparts */ -+#define CONFIG_CMD_MTDPARTS -+#endif -+ -+/* -+ * For commands to use, we take the default list and add a few other -+ * useful commands. Note that we must have set CONFIG_SYS_NO_FLASH -+ * prior to this include, in order to skip a few commands. When we do -+ * have flash, if we expect these commands they must be enabled in that -+ * config. If desired, a specific list of desired commands can be used -+ * instead. -+ */ -+#include -+#define CONFIG_CMD_ASKENV -+#define CONFIG_CMD_ECHO -+#define CONFIG_CMD_BOOTZ -+ -+/* -+ * Common filesystems support. When we have removable storage we -+ * enabled a number of useful commands and support. -+ */ -+#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE) -+#define CONFIG_DOS_PARTITION -+#define CONFIG_CMD_FAT -+#define CONFIG_FAT_WRITE -+#define CONFIG_CMD_EXT2 -+#define CONFIG_CMD_EXT4 -+#define CONFIG_CMD_FS_GENERIC -+#endif -+ -+/* -+ * Our platforms make use of SPL to initalize the hardware (primarily -+ * memory) enough for full U-Boot to be loaded. We also support Falcon -+ * Mode so that the Linux kernel can be booted directly from SPL -+ * instead, if desired. We make use of the general SPL framework found -+ * under common/spl/. Given our generally common memory map, we set a -+ * number of related defaults and sizes here. -+ */ -+#if !defined(CONFIG_NOR_BOOT) && \ -+ !(defined(CONFIG_QSPI_BOOT) && defined(CONFIG_AM43XX)) -+#define CONFIG_SPL -+#define CONFIG_SPL_FRAMEWORK -+#define CONFIG_SPL_OS_BOOT -+ -+/* -+ * Place the image at the start of the ROM defined image space. -+ * We limit our size to the ROM-defined downloaded image area, and use the -+ * rest of the space for stack. We load U-Boot itself into memory at -+ * 0x80800000 for legacy reasons (to not conflict with older SPLs). We -+ * have our BSS be placed 1MiB after this, to allow for the default -+ * Linux kernel address of 0x80008000 to work, in the Falcon Mode case. -+ * We have the SPL malloc pool at the end of the BSS area. -+ */ -+#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR -+#ifndef CONFIG_SYS_TEXT_BASE -+#define CONFIG_SYS_TEXT_BASE 0x80800000 -+#endif -+#ifndef CONFIG_SPL_BSS_START_ADDR -+#define CONFIG_SPL_BSS_START_ADDR 0x80a00000 -+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ -+#endif -+#ifndef CONFIG_SYS_SPL_MALLOC_START -+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ -+ CONFIG_SPL_BSS_MAX_SIZE) -+#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN -+#endif -+ -+/* RAW SD card / eMMC locations. */ -+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -+ -+/* FAT sd card locations. */ -+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" -+ -+#ifdef CONFIG_SPL_OS_BOOT -+/* FAT */ -+#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage" -+#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args" -+ -+/* RAW SD card / eMMC */ -+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */ -+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ -+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ -+ -+/* NAND */ -+#ifdef CONFIG_NAND -+#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */ -+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -+#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 -+#endif -+ -+/* spl export command */ -+#define CONFIG_CMD_SPL -+#endif -+ -+#ifdef CONFIG_MMC -+#define CONFIG_SPL_LIBDISK_SUPPORT -+#define CONFIG_SPL_MMC_SUPPORT -+#define CONFIG_SPL_FAT_SUPPORT -+#endif -+ -+/* General parts of the framework, required. */ -+#define CONFIG_SPL_I2C_SUPPORT -+#define CONFIG_SPL_LIBCOMMON_SUPPORT -+#define CONFIG_SPL_LIBGENERIC_SUPPORT -+#define CONFIG_SPL_SERIAL_SUPPORT -+#define CONFIG_SPL_GPIO_SUPPORT -+#define CONFIG_SPL_BOARD_INIT -+ -+#ifdef CONFIG_NAND -+#define CONFIG_SPL_NAND_SUPPORT -+#define CONFIG_SPL_NAND_BASE -+#define CONFIG_SPL_NAND_DRIVERS -+#define CONFIG_SPL_NAND_ECC -+#define CONFIG_SPL_MTD_SUPPORT -+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -+/* #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 */ /* Defined later in this configuration */ -+#endif -+#endif /* !CONFIG_NOR_BOOT */ -+ -+#ifndef CONFIG_SPL_BUILD -+# define CONFIG_FIT -+# define CONFIG_TIMESTAMP -+# define CONFIG_LZO -+# ifdef CONFIG_ENABLE_VBOOT -+# define CONFIG_OF_CONTROL -+# define CONFIG_OF_SEPARATE -+# define CONFIG_DEFAULT_DEVICE_TREE am335x-chiliboard -+# define CONFIG_FIT_SIGNATURE -+# define CONFIG_RSA -+# endif -+#endif -+ -+#define CONFIG_SYS_BOOTM_LEN (16 << 20) -+ -+#define CONFIG_BOARD_LATE_INIT -+ -+#define CONFIG_SERIAL1 1 -+#define CONFIG_CONS_INDEX 1 -+ -+/* Clock Defines */ -+#define V_OSCK 24000000 /* Clock output from T2 */ -+#define V_SCLK (V_OSCK) -+ -+/* Custom script for NOR */ -+#define CONFIG_SYS_LDSCRIPT "board/grinn/chiliboard/u-boot.lds" -+ -+/* Always 128 KiB env size */ -+#define CONFIG_ENV_SIZE (128 << 10) -+ -+/* Enhance our eMMC support / experience. */ -+#define CONFIG_CMD_GPT -+#define CONFIG_EFI_PARTITION -+#define CONFIG_PARTITION_UUIDS -+#define CONFIG_CMD_PART -+ -+#ifdef CONFIG_NAND -+#ifndef CONFIG_NAND512MB -+#define NANDARGS \ -+ "mtdids=" MTDIDS_DEFAULT "\0" \ -+ "mtdparts=" MTDPARTS_DEFAULT "\0" \ -+ "nandargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${nandroot} " \ -+ "rootfstype=${nandrootfstype}\0" \ -+ "nandroot=ubi0:rootfs rw ubi.mtd=8,2048\0" \ -+ "nandrootfstype=ubifs rootwait=1\0" \ -+ "nandboot=echo Booting from nand ...; " \ -+ "run nandargs; " \ -+ "nand read ${fdtaddr} u-boot-spl-os; " \ -+ "nand read ${loadaddr} kernel; " \ -+ "bootz ${loadaddr} - ${fdtaddr}\0" -+#else -+#define NANDARGS \ -+ "mtdids=" MTDIDS_DEFAULT "\0" \ -+ "mtdparts=" MTDPARTS_DEFAULT "\0" \ -+ "nandargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${nandroot} " \ -+ "rootfstype=${nandrootfstype}\0" \ -+ "nandroot=ubi0:rootfs rw ubi.mtd=8,4096\0" \ -+ "nandrootfstype=ubifs rootwait=1\0" \ -+ "nandboot=echo Booting from nand ...; " \ -+ "run nandargs; " \ -+ "nand read ${fdtaddr} u-boot-spl-os; " \ -+ "nand read ${loadaddr} kernel; " \ -+ "bootz ${loadaddr} - ${fdtaddr}\0" -+#endif -+#else -+#define NANDARGS "" -+#endif -+ -+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG -+ -+#ifndef CONFIG_SPL_BUILD -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ DEFAULT_LINUX_BOOT_ENV \ -+ "boot_fdt=try\0" \ -+ "bootpart=0:2\0" \ -+ "bootdir=/boot\0" \ -+ "bootfile=zImage\0" \ -+ "fdtfile=undefined\0" \ -+ "console=ttyO0,115200n8\0" \ -+ "partitions=" \ -+ "uuid_disk=${uuid_gpt_disk};" \ -+ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ -+ "optargs=\0" \ -+ "mmcdev=0\0" \ -+ "mmcroot=/dev/mmcblk0p2 rw\0" \ -+ "mmcrootfstype=ext4 rootwait\0" \ -+ "rootpath=/export/rootfs\0" \ -+ "nfsopts=nolock\0" \ -+ "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ -+ "::off\0" \ -+ "ramroot=/dev/ram0 rw\0" \ -+ "ramrootfstype=ext2\0" \ -+ "mmcargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${mmcroot} " \ -+ "rootfstype=${mmcrootfstype}\0" \ -+ "spiroot=/dev/mtdblock4 rw\0" \ -+ "spirootfstype=jffs2\0" \ -+ "spisrcaddr=0xe0000\0" \ -+ "spiimgsize=0x362000\0" \ -+ "spibusno=0\0" \ -+ "spiargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${spiroot} " \ -+ "rootfstype=${spirootfstype}\0" \ -+ "netargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=/dev/nfs " \ -+ "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ -+ "ip=dhcp\0" \ -+ "bootenv=uEnv.txt\0" \ -+ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ -+ "importbootenv=echo Importing environment from mmc ...; " \ -+ "env import -t $loadaddr $filesize\0" \ -+ "ramargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${ramroot} " \ -+ "rootfstype=${ramrootfstype}\0" \ -+ "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ -+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -+ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ -+ "mmcloados=run mmcargs; " \ -+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -+ "if run loadfdt; then " \ -+ "bootz ${loadaddr} - ${fdtaddr}; " \ -+ "else " \ -+ "if test ${boot_fdt} = try; then " \ -+ "bootz; " \ -+ "else " \ -+ "echo WARN: Cannot load the DT; " \ -+ "fi; " \ -+ "fi; " \ -+ "else " \ -+ "bootz; " \ -+ "fi;\0" \ -+ "mmcboot=mmc dev ${mmcdev}; " \ -+ "if mmc rescan; then " \ -+ "echo SD/MMC found on device ${mmcdev};" \ -+ "if run loadbootenv; then " \ -+ "echo Loaded environment from ${bootenv};" \ -+ "run importbootenv;" \ -+ "fi;" \ -+ "if test -n $uenvcmd; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "if run loadimage; then " \ -+ "run mmcloados;" \ -+ "fi;" \ -+ "fi;\0" \ -+ "spiboot=echo Booting from spi ...; " \ -+ "run spiargs; " \ -+ "sf probe ${spibusno}:0; " \ -+ "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \ -+ "bootz ${loadaddr}\0" \ -+ "netboot=echo Booting from network ...; " \ -+ "setenv autoload no; " \ -+ "dhcp; " \ -+ "tftp ${loadaddr} ${bootfile}; " \ -+ "tftp ${fdtaddr} ${fdtfile}; " \ -+ "run netargs; " \ -+ "bootz ${loadaddr} - ${fdtaddr}\0" \ -+ "ramboot=echo Booting from ramdisk ...; " \ -+ "run ramargs; " \ -+ "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ -+ "findfdt="\ -+ "setenv fdtfile am335x-chiliboard.dtb;\0" \ -+ NANDARGS \ -+ DFUARGS -+#endif -+ -+#define CONFIG_BOOTCOMMAND \ -+ "run findfdt; " \ -+ "run mmcboot;" \ -+ "setenv mmcdev 1; " \ -+ "setenv bootpart 1:2; " \ -+ "run mmcboot;" \ -+ "run nandboot;" -+ -+/* NS16550 Configuration */ -+#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ -+#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ -+#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ -+#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ -+#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ -+#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ -+#define CONFIG_BAUDRATE 115200 -+ -+/* -+#define CONFIG_CMD_EEPROM -+#define CONFIG_ENV_EEPROM_IS_ON_I2C -+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -+#define CONFIG_SYS_I2C_MULTI_EEPROMS -+*/ -+ -+/* PMIC support */ -+#define CONFIG_POWER_TPS65217 -+/* #define CONFIG_POWER_TPS65910 */ -+ -+/* SPL */ -+#ifndef CONFIG_NOR_BOOT -+#define CONFIG_SPL_POWER_SUPPORT -+#define CONFIG_SPL_YMODEM_SUPPORT -+ -+/* Bootcount using the RTC block */ -+#define CONFIG_BOOTCOUNT_LIMIT -+#define CONFIG_BOOTCOUNT_AM33XX -+ -+/* USB gadget RNDIS */ -+#define CONFIG_SPL_MUSB_NEW_SUPPORT -+ -+/* General network SPL, both CPSW and USB gadget RNDIS */ -+#define CONFIG_SPL_NET_SUPPORT -+#define CONFIG_SPL_ENV_SUPPORT -+#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" -+ -+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" -+ -+#ifdef CONFIG_NAND -+#define CONFIG_NAND_OMAP_GPMC -+#define CONFIG_NAND_OMAP_ELM -+#define CONFIG_SYS_NAND_5_ADDR_CYCLE -+#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ -+ CONFIG_SYS_NAND_PAGE_SIZE) -+ -+#ifndef CONFIG_NAND512MB -+#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -+#define CONFIG_SYS_NAND_OOBSIZE 64 -+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -+#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ -+ 10, 11, 12, 13, 14, 15, 16, 17, \ -+ 18, 19, 20, 21, 22, 23, 24, 25, \ -+ 26, 27, 28, 29, 30, 31, 32, 33, \ -+ 34, 35, 36, 37, 38, 39, 40, 41, \ -+ 42, 43, 44, 45, 46, 47, 48, 49, \ -+ 50, 51, 52, 53, 54, 55, 56, 57, } -+ -+#define CONFIG_SYS_NAND_ECCSIZE 512 -+#define CONFIG_SYS_NAND_ECCBYTES 14 -+#define CONFIG_SYS_NAND_ONFI_DETECTION -+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW -+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -+#else -+#define CONFIG_SYS_NAND_PAGE_SIZE 4096 -+#define CONFIG_SYS_NAND_OOBSIZE 224 -+#define CONFIG_SYS_NAND_BLOCK_SIZE (256*1024) -+#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -+#define CONFIG_SYS_NAND_ECCPOS {\ -+ 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\ -+ 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\ -+ 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,\ -+ 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,\ -+ 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,\ -+ 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75,\ -+ 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,\ -+ 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99,\ -+ 100, 101, 102, 103, 104, 105, 106, 107, 108, 109,\ -+ 110, 111, 112, 113, 114, 115, 116, 117, 118, 119,\ -+ 120, 121, 122, 123, 124, 125, 126, 127, 128, 129,\ -+ 130, 131, 132, 133, 134, 135, 136, 137, 138, 139,\ -+ 140, 141, 142, 143, 144, 145, 146, 147, 148, 149,\ -+ 150, 151, 152, 153, 154, 155, 156, 157, 158, 159,\ -+ 160, 161, 162, 163, 164, 165, 166, 167, 168, 169,\ -+ 170, 171, 172, 173, 174, 175, 176, 177, 178, 179,\ -+ 180, 181, 182, 183, 184, 185, 186, 187, 188, 189,\ -+ 190, 191, 192, 193, 194, 195, 196, 197, 198, 199,\ -+ 200, 201, 202, 203, 204, 205, 206, 207, 208, 209} -+ -+#define CONFIG_SYS_NAND_ECCSIZE 512 -+#define CONFIG_SYS_NAND_ECCBYTES 26 -+#define CONFIG_SYS_NAND_ONFI_DETECTION -+#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW -+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x100000 -+#endif -+ -+#endif -+#endif -+ -+/* -+ * For NOR boot, we must set this to the start of where NOR is mapped -+ * in memory. -+ */ -+#ifdef CONFIG_NOR_BOOT -+#define CONFIG_SYS_TEXT_BASE 0x08000000 -+#endif -+ -+/* -+ * USB configuration. We enable MUSB support, both for host and for -+ * gadget. We set USB0 as peripheral and USB1 as host, based on the -+ * board schematic and physical port wired to each. Then for host we -+ * add mass storage support and for gadget we add both RNDIS ethernet -+ * and DFU. -+ */ -+#define CONFIG_USB_MUSB_DSPS -+#define CONFIG_ARCH_MISC_INIT -+#define CONFIG_MUSB_GADGET -+#define CONFIG_MUSB_PIO_ONLY -+#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT -+#define CONFIG_USB_GADGET -+#define CONFIG_USBDOWNLOAD_GADGET -+#define CONFIG_USB_GADGET_DUALSPEED -+#define CONFIG_USB_GADGET_VBUS_DRAW 2 -+#define CONFIG_MUSB_HOST -+#define CONFIG_AM335X_USB0 -+#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -+#define CONFIG_AM335X_USB1 -+#define CONFIG_AM335X_USB1_MODE MUSB_HOST -+ -+#ifdef CONFIG_MUSB_HOST -+#define CONFIG_CMD_USB -+#define CONFIG_USB_STORAGE -+#endif -+ -+#ifdef CONFIG_MUSB_GADGET -+#define CONFIG_USB_ETHER -+#define CONFIG_USB_ETH_RNDIS -+#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" -+ -+/* USB TI's IDs */ -+#define CONFIG_G_DNL_VENDOR_NUM 0x0403 -+#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 -+#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" -+#endif /* CONFIG_MUSB_GADGET */ -+ -+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) -+/* disable host part of MUSB in SPL */ -+#undef CONFIG_MUSB_HOST -+/* disable EFI partitions and partition UUID support */ -+#undef CONFIG_PARTITION_UUIDS -+#undef CONFIG_EFI_PARTITION -+/* -+ * Disable CPSW SPL support so we fit within the 101KiB limit. -+ */ -+#undef CONFIG_SPL_ETH_SUPPORT -+#endif -+ -+/* USB Device Firmware Update support */ -+#ifndef CONFIG_SPL_BUILD -+#define CONFIG_DFU_FUNCTION -+#define CONFIG_DFU_MMC -+#define CONFIG_CMD_DFU -+#define DFU_ALT_INFO_MMC \ -+ "dfu_alt_info_mmc=" \ -+ "boot part 0 1;" \ -+ "rootfs part 0 2;" \ -+ "MLO fat 0 1;" \ -+ "MLO.raw mmc 0x100 0x100;" \ -+ "u-boot.img.raw mmc 0x300 0x400;" \ -+ "spl-os-args.raw mmc 0x80 0x80;" \ -+ "spl-os-image.raw mmc 0x900 0x2000;" \ -+ "spl-os-args fat 0 1;" \ -+ "spl-os-image fat 0 1;" \ -+ "u-boot.img fat 0 1;" \ -+ "uEnv.txt fat 0 1\0" -+#ifdef CONFIG_NAND -+#define CONFIG_DFU_NAND -+#define DFU_ALT_INFO_NAND \ -+ "dfu_alt_info_nand=" \ -+ "SPL part 0 1;" \ -+ "SPL.backup1 part 0 2;" \ -+ "SPL.backup2 part 0 3;" \ -+ "SPL.backup3 part 0 4;" \ -+ "u-boot part 0 5;" \ -+ "u-boot-spl-os part 0 6;" \ -+ "kernel part 0 8;" \ -+ "rootfs part 0 9\0" -+#else -+#define DFU_ALT_INFO_NAND "" -+#endif -+#define CONFIG_DFU_RAM -+#define DFU_ALT_INFO_RAM \ -+ "dfu_alt_info_ram=" \ -+ "kernel ram 0x80200000 0xD80000;" \ -+ "fdt ram 0x80F80000 0x80000;" \ -+ "ramdisk ram 0x81000000 0x4000000\0" -+#define DFUARGS \ -+ "dfu_alt_info_emmc=rawemmc mmc 0 3751936\0" \ -+ DFU_ALT_INFO_MMC \ -+ DFU_ALT_INFO_RAM \ -+ DFU_ALT_INFO_NAND -+#endif -+ -+/* -+ * Default to using SPI for environment, etc. -+ * 0x000000 - 0x020000 : SPL (128KiB) -+ * 0x020000 - 0x0A0000 : U-Boot (512KiB) -+ * 0x0A0000 - 0x0BFFFF : First copy of U-Boot Environment (128KiB) -+ * 0x0C0000 - 0x0DFFFF : Second copy of U-Boot Environment (128KiB) -+ * 0x0E0000 - 0x442000 : Linux Kernel -+ * 0x442000 - 0x800000 : Userland -+ */ -+#if defined(CONFIG_SPI_BOOT) -+/* SPL related */ -+#undef CONFIG_SPL_OS_BOOT /* Not supported by existing map */ -+#define CONFIG_SPL_SPI_SUPPORT -+#define CONFIG_SPL_SPI_FLASH_SUPPORT -+#define CONFIG_SPL_SPI_LOAD -+#define CONFIG_SPL_SPI_BUS 0 -+#define CONFIG_SPL_SPI_CS 0 -+#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 -+ -+#define CONFIG_ENV_IS_IN_SPI_FLASH -+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT -+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED -+#define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ -+#define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */ -+#define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */ -+#define MTDIDS_DEFAULT "nor0=m25p80-flash.0" -+#define MTDPARTS_DEFAULT "mtdparts=m25p80-flash.0:128k(SPL)," \ -+ "512k(u-boot),128k(u-boot-env1)," \ -+ "128k(u-boot-env2),3464k(kernel)," \ -+ "-(rootfs)" -+#elif defined(CONFIG_EMMC_BOOT) -+#undef CONFIG_ENV_IS_NOWHERE -+#define CONFIG_ENV_IS_IN_MMC -+#define CONFIG_SYS_MMC_ENV_DEV 1 -+#define CONFIG_SYS_MMC_ENV_PART 2 -+#define CONFIG_ENV_OFFSET 0x0 -+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT -+#endif -+ -+/* SPI flash. */ -+#define CONFIG_CMD_SF -+#define CONFIG_SPI_FLASH -+#define CONFIG_SPI_FLASH_WINBOND -+#define CONFIG_SF_DEFAULT_SPEED 24000000 -+ -+/* Network. */ -+#define CONFIG_PHY_GIGE -+#define CONFIG_PHYLIB -+#define CONFIG_PHY_SMSC -+ -+/* NAND support */ -+#ifdef CONFIG_NAND -+#define CONFIG_CMD_NAND -+#if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT) -+#define MTDIDS_DEFAULT "nand0=omap2-nand.0" -+ -+#ifndef CONFIG_NAND512MB -+#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \ -+ "128k(SPL.backup1)," \ -+ "128k(SPL.backup2)," \ -+ "128k(SPL.backup3),1792k(u-boot)," \ -+ "128k(u-boot-spl-os)," \ -+ "128k(u-boot-env),5m(kernel),-(rootfs)" -+#define CONFIG_ENV_IS_IN_NAND -+#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ -+#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -+#else -+#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:256k(SPL)," \ -+ "256k(SPL.backup1)," \ -+ "256k(SPL.backup2)," \ -+ "256k(SPL.backup3),2048k(u-boot)," \ -+ "256k(u-boot-spl-os)," \ -+ "256k(u-boot-env),5m(kernel),-(rootfs)" -+#define CONFIG_ENV_IS_IN_NAND -+#define CONFIG_ENV_OFFSET 0x340000 /* environment starts here */ -+#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -+#endif -+ -+#endif -+#endif -+ -+/* -+ * NOR Size = 16 MiB -+ * Number of Sectors/Blocks = 128 -+ * Sector Size = 128 KiB -+ * Word length = 16 bits -+ * Default layout: -+ * 0x000000 - 0x07FFFF : U-Boot (512 KiB) -+ * 0x080000 - 0x09FFFF : First copy of U-Boot Environment (128 KiB) -+ * 0x0A0000 - 0x0BFFFF : Second copy of U-Boot Environment (128 KiB) -+ * 0x0C0000 - 0x4BFFFF : Linux Kernel (4 MiB) -+ * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB) -+ */ -+#if defined(CONFIG_NOR) -+#undef CONFIG_SYS_NO_FLASH -+#define CONFIG_CMD_FLASH -+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -+#define CONFIG_SYS_FLASH_PROTECTION -+#define CONFIG_SYS_FLASH_CFI -+#define CONFIG_FLASH_CFI_DRIVER -+#define CONFIG_FLASH_CFI_MTD -+#define CONFIG_SYS_MAX_FLASH_SECT 128 -+#define CONFIG_SYS_MAX_FLASH_BANKS 1 -+#define CONFIG_SYS_FLASH_BASE (0x08000000) -+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -+/* Reduce SPL size by removing unlikey targets */ -+#ifdef CONFIG_NOR_BOOT -+#define CONFIG_ENV_IS_IN_FLASH -+#define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -+#define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */ -+#define CONFIG_ENV_OFFSET_REDUND (768 << 10) /* 768 KiB */ -+#define MTDIDS_DEFAULT "nor0=physmap-flash.0" -+#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \ -+ "512k(u-boot)," \ -+ "128k(u-boot-env1)," \ -+ "128k(u-boot-env2)," \ -+ "4m(kernel),-(rootfs)" -+#endif -+#endif /* NOR support */ -+ -+#endif /* ! __CONFIG_CHILISOM_H */ --- -2.5.0 - diff --git a/libre/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch b/libre/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch deleted file mode 100644 index fc41962ef..000000000 --- a/libre/uboot4extlinux-chiliboard/0006-parabola-arm-modifications.patch +++ /dev/null @@ -1,423 +0,0 @@ -diff -Nur u-boot-2014.07.orig/include/config_distro_bootcmd.h u-boot-2014.07/include/config_distro_bootcmd.h ---- u-boot-2014.07.orig/include/config_distro_bootcmd.h 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2014.07/include/config_distro_bootcmd.h 2015-04-13 11:53:03.000000000 -0300 -@@ -0,0 +1,236 @@ -+/* -+ * (C) Copyright 2014 -+ * NVIDIA Corporation -+ * -+ * Copyright 2014 Red Hat, Inc. -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+#ifndef _CONFIG_CMD_DISTRO_BOOTCMD_H -+#define _CONFIG_CMD_DISTRO_BOOTCMD_H -+ -+/* -+ * A note on error handling: It is possible for BOOT_TARGET_DEVICES to -+ * reference a device that is not enabled in the U-Boot configuration, e.g. -+ * it may include MMC in the list without CONFIG_CMD_MMC being enabled. Given -+ * that BOOT_TARGET_DEVICES is a macro that's expanded by the C pre-processor -+ * at compile time, it's not possible to detect and report such problems via -+ * a simple #ifdef/#error combination. Still, the code needs to report errors. -+ * The best way I've found to do this is to make BOOT_TARGET_DEVICES expand to -+ * reference a non-existent symbol, and have the name of that symbol encode -+ * the error message. Consequently, this file contains references to e.g. -+ * BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC. Given the -+ * prevalence of capitals here, this looks like a pre-processor macro and -+ * hence seems like it should be all capitals, but it's really an error -+ * message that includes some other pre-processor symbols in the text. -+ */ -+ -+/* We need the part command */ -+#define CONFIG_PARTITION_UUIDS -+#define CONFIG_CMD_PART -+ -+#define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \ -+ "if " #devtypel " dev ${devnum}; then " \ -+ "setenv devtype " #devtypel "; " \ -+ "run scan_dev_for_boot_part; " \ -+ "fi\0" -+ -+#define BOOTENV_SHARED_BLKDEV(devtypel) \ -+ #devtypel "_boot=" \ -+ BOOTENV_SHARED_BLKDEV_BODY(devtypel) -+ -+#define BOOTENV_DEV_BLKDEV(devtypeu, devtypel, instance) \ -+ "bootcmd_" #devtypel #instance "=" \ -+ "setenv devnum " #instance "; " \ -+ "run " #devtypel "_boot\0" -+ -+#define BOOTENV_DEV_NAME_BLKDEV(devtypeu, devtypel, instance) \ -+ #devtypel #instance " " -+ -+#ifdef CONFIG_CMD_MMC -+#define BOOTENV_SHARED_MMC BOOTENV_SHARED_BLKDEV(mmc) -+#define BOOTENV_DEV_MMC BOOTENV_DEV_BLKDEV -+#define BOOTENV_DEV_NAME_MMC BOOTENV_DEV_NAME_BLKDEV -+#else -+#define BOOTENV_SHARED_MMC -+#define BOOTENV_DEV_MMC \ -+ BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC -+#define BOOTENV_DEV_NAME_MMC \ -+ BOOT_TARGET_DEVICES_references_MMC_without_CONFIG_CMD_MMC -+#endif -+ -+#ifdef CONFIG_CMD_SATA -+#define BOOTENV_SHARED_SATA BOOTENV_SHARED_BLKDEV(sata) -+#define BOOTENV_DEV_SATA BOOTENV_DEV_BLKDEV -+#define BOOTENV_DEV_NAME_SATA BOOTENV_DEV_NAME_BLKDEV -+#else -+#define BOOTENV_SHARED_SATA -+#define BOOTENV_DEV_SATA \ -+ BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA -+#define BOOTENV_DEV_NAME_SATA \ -+ BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA -+#endif -+ -+#ifdef CONFIG_CMD_SCSI -+#define BOOTENV_RUN_SCSI_INIT "run scsi_init; " -+#define BOOTENV_SET_SCSI_NEED_INIT "setenv scsi_need_init; " -+#define BOOTENV_SHARED_SCSI \ -+ "scsi_init=" \ -+ "if ${scsi_need_init}; then " \ -+ "setenv scsi_need_init false; " \ -+ "scsi scan; " \ -+ "fi\0" \ -+ \ -+ "scsi_boot=" \ -+ BOOTENV_RUN_SCSI_INIT \ -+ BOOTENV_SHARED_BLKDEV_BODY(scsi) -+#define BOOTENV_DEV_SCSI BOOTENV_DEV_BLKDEV -+#define BOOTENV_DEV_NAME_SCSI BOOTENV_DEV_NAME_BLKDEV -+#else -+#define BOOTENV_RUN_SCSI_INIT -+#define BOOTENV_SET_SCSI_NEED_INIT -+#define BOOTENV_SHARED_SCSI -+#define BOOTENV_DEV_SCSI \ -+ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI -+#define BOOTENV_DEV_NAME_SCSI \ -+ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI -+#endif -+ -+#ifdef CONFIG_CMD_IDE -+#define BOOTENV_SHARED_IDE BOOTENV_SHARED_BLKDEV(ide) -+#define BOOTENV_DEV_IDE BOOTENV_DEV_BLKDEV -+#define BOOTENV_DEV_NAME_IDE BOOTENV_DEV_NAME_BLKDEV -+#else -+#define BOOTENV_SHARED_IDE -+#define BOOTENV_DEV_IDE \ -+ BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE -+#define BOOTENV_DEV_NAME_IDE \ -+ BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE -+#endif -+ -+#ifdef CONFIG_CMD_USB -+#define BOOTENV_RUN_USB_INIT "usb start; " -+#define BOOTENV_SHARED_USB \ -+ "usb_boot=" \ -+ BOOTENV_RUN_USB_INIT \ -+ BOOTENV_SHARED_BLKDEV_BODY(usb) -+#define BOOTENV_DEV_USB BOOTENV_DEV_BLKDEV -+#define BOOTENV_DEV_NAME_USB BOOTENV_DEV_NAME_BLKDEV -+#else -+#define BOOTENV_RUN_USB_INIT -+#define BOOTENV_SHARED_USB -+#define BOOTENV_DEV_USB \ -+ BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB -+#define BOOTENV_DEV_NAME_USB \ -+ BOOT_TARGET_DEVICES_references_USB_without_CONFIG_CMD_USB -+#endif -+ -+#if defined(CONFIG_CMD_DHCP) -+#define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \ -+ "bootcmd_dhcp=" \ -+ BOOTENV_RUN_USB_INIT \ -+ "if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \ -+ "source ${scriptaddr}; " \ -+ "fi\0" -+#define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \ -+ "dhcp " -+#else -+#define BOOTENV_DEV_DHCP \ -+ BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP -+#define BOOTENV_DEV_NAME_DHCP \ -+ BOOT_TARGET_DEVICES_references_DHCP_without_CONFIG_CMD_DHCP -+#endif -+ -+#if defined(CONFIG_CMD_DHCP) && defined(CONFIG_CMD_PXE) -+#define BOOTENV_DEV_PXE(devtypeu, devtypel, instance) \ -+ "bootcmd_pxe=" \ -+ BOOTENV_RUN_USB_INIT \ -+ "dhcp; " \ -+ "if pxe get; then " \ -+ "pxe boot; " \ -+ "fi\0" -+#define BOOTENV_DEV_NAME_PXE(devtypeu, devtypel, instance) \ -+ "pxe " -+#else -+#define BOOTENV_DEV_PXE \ -+ BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE -+#define BOOTENV_DEV_NAME_PXE \ -+ BOOT_TARGET_DEVICES_references_PXE_without_CONFIG_CMD_DHCP_or_PXE -+#endif -+ -+#define BOOTENV_DEV_NAME(devtypeu, devtypel, instance) \ -+ BOOTENV_DEV_NAME_##devtypeu(devtypeu, devtypel, instance) -+#define BOOTENV_BOOT_TARGETS \ -+ "boot_targets=" BOOT_TARGET_DEVICES(BOOTENV_DEV_NAME) "\0" -+ -+#define BOOTENV_DEV(devtypeu, devtypel, instance) \ -+ BOOTENV_DEV_##devtypeu(devtypeu, devtypel, instance) -+#define BOOTENV \ -+ BOOTENV_SHARED_MMC \ -+ BOOTENV_SHARED_USB \ -+ BOOTENV_SHARED_SATA \ -+ BOOTENV_SHARED_SCSI \ -+ BOOTENV_SHARED_IDE \ -+ "boot_prefixes=/ /boot/\0" \ -+ "boot_scripts=boot.scr.uimg boot.scr\0" \ -+ "boot_script_dhcp=boot.scr.uimg\0" \ -+ BOOTENV_BOOT_TARGETS \ -+ \ -+ "boot_extlinux=" \ -+ "sysboot ${devtype} ${devnum}:${bootpart} any " \ -+ "${scriptaddr} ${prefix}extlinux/extlinux.conf\0" \ -+ \ -+ "scan_dev_for_extlinux=" \ -+ "if test -e ${devtype} ${devnum}:${bootpart} " \ -+ "${prefix}extlinux/extlinux.conf; then " \ -+ "echo Found ${prefix}extlinux/extlinux.conf; " \ -+ "run boot_extlinux; " \ -+ "echo SCRIPT FAILED: continuing...; " \ -+ "fi\0" \ -+ \ -+ "boot_a_script=" \ -+ "load ${devtype} ${devnum}:${bootpart} " \ -+ "${scriptaddr} ${prefix}${script}; " \ -+ "source ${scriptaddr}\0" \ -+ \ -+ "scan_dev_for_scripts=" \ -+ "for script in ${boot_scripts}; do " \ -+ "if test -e ${devtype} ${devnum}:${bootpart} " \ -+ "${prefix}${script}; then " \ -+ "echo Found U-Boot script " \ -+ "${prefix}${script}; " \ -+ "run boot_a_script; " \ -+ "echo SCRIPT FAILED: continuing...; " \ -+ "fi; " \ -+ "done\0" \ -+ \ -+ "scan_dev_for_boot=" \ -+ "echo Scanning ${devtype} ${devnum}:${bootpart}...; " \ -+ "for prefix in ${boot_prefixes}; do " \ -+ "run scan_dev_for_extlinux; " \ -+ "run scan_dev_for_scripts; " \ -+ "done\0" \ -+ \ -+ "scan_dev_for_boot_part=" \ -+ "part list ${devtype} ${devnum} -bootable devplist; " \ -+ "env exists devplist || setenv devplist 1; " \ -+ "for bootpart in ${devplist}; do " \ -+ "if fstype ${devtype} ${devnum}:${bootpart} " \ -+ "bootfstype; then " \ -+ "run scan_dev_for_boot; " \ -+ "fi; " \ -+ "done\0" \ -+ \ -+ BOOT_TARGET_DEVICES(BOOTENV_DEV) \ -+ \ -+ "distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT \ -+ "for target in ${boot_targets}; do " \ -+ "run bootcmd_${target}; " \ -+ "done\0" -+ -+#ifndef CONFIG_BOOTCOMMAND -+#define CONFIG_BOOTCOMMAND "run distro_bootcmd" -+#endif -+ -+#endif /* _CONFIG_CMD_DISTRO_BOOTCMD_H */ -diff -Nur u-boot-2014.07.orig/include/configs/chiliboard.h u-boot-2014.07/include/configs/chiliboard.h ---- u-boot-2014.07.orig/include/configs/chiliboard.h 2016-02-25 00:53:19.766846991 -0300 -+++ u-boot-2014.07/include/configs/chiliboard.h 2016-02-25 00:57:01.436205462 -0300 -@@ -124,7 +124,6 @@ - * as that will normally be within the kernel lowmem and thus visible via - * bootm_size and we only run on platforms with 256MB or more of memory. - */ --#ifdef CONFIG_RAM128MB - #define DEFAULT_LINUX_BOOT_ENV \ - "loadaddr=0x82000000\0" \ - "kernel_addr_r=0x82000000\0" \ -@@ -133,16 +132,6 @@ - "rdaddr=0x84080000\0" \ - "ramdisk_addr_r=0x84080000\0" \ - "bootm_size=0x8000000\0" --#else --#define DEFAULT_LINUX_BOOT_ENV \ -- "loadaddr=0x82000000\0" \ -- "kernel_addr_r=0x82000000\0" \ -- "fdtaddr=0x88000000\0" \ -- "fdt_addr_r=0x88000000\0" \ -- "rdaddr=0x88080000\0" \ -- "ramdisk_addr_r=0x88080000\0" \ -- "bootm_size=0x10000000\0" --#endif - - /* - * Default to a quick boot delay. -@@ -258,6 +247,7 @@ - #define CONFIG_CMD_ASKENV - #define CONFIG_CMD_ECHO - #define CONFIG_CMD_BOOTZ -+#define CONFIG_SUPPORT_RAW_INITRD - - /* - * Common filesystems support. When we have removable storage we -@@ -398,6 +388,9 @@ - #define CONFIG_EFI_PARTITION - #define CONFIG_PARTITION_UUIDS - #define CONFIG_CMD_PART -+#define CONFIG_CMD_SETEXPR -+ -+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre" - - #ifdef CONFIG_NAND - #ifndef CONFIG_NAND512MB -@@ -437,12 +430,20 @@ - - #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - -+/* Enable Extlinux boot support */ -+#define CONFIG_CMD_PXE -+#define CONFIG_MENU -+#define BOOT_TARGET_DEVICES(func) -+#include -+ - #ifndef CONFIG_SPL_BUILD - #define CONFIG_EXTRA_ENV_SETTINGS \ -+ BOOTENV \ - DEFAULT_LINUX_BOOT_ENV \ - "boot_fdt=try\0" \ -- "bootpart=0:2\0" \ -+ "bootpart=0:1\0" \ - "bootdir=/boot\0" \ -+ "fdtdir=/boot/dtbs\0" \ - "bootfile=zImage\0" \ - "fdtfile=undefined\0" \ - "console=ttyO0,115200n8\0" \ -@@ -450,9 +451,6 @@ - "uuid_disk=${uuid_gpt_disk};" \ - "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ - "optargs=\0" \ -- "mmcdev=0\0" \ -- "mmcroot=/dev/mmcblk0p2 rw\0" \ -- "mmcrootfstype=ext4 rootwait\0" \ - "rootpath=/export/rootfs\0" \ - "nfsopts=nolock\0" \ - "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ -@@ -461,8 +459,7 @@ - "ramrootfstype=ext2\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ -- "root=${mmcroot} " \ -- "rootfstype=${mmcrootfstype}\0" \ -+ "root=${root}\0" \ - "spiroot=/dev/mtdblock4 rw\0" \ - "spirootfstype=jffs2\0" \ - "spisrcaddr=0xe0000\0" \ -@@ -477,46 +474,48 @@ - "root=/dev/nfs " \ - "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ - "ip=dhcp\0" \ -- "bootenv=uEnv.txt\0" \ -- "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ -- "importbootenv=echo Importing environment from mmc ...; " \ -- "env import -t $loadaddr $filesize\0" \ - "ramargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${ramroot} " \ - "rootfstype=${ramrootfstype}\0" \ -- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ -- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ -- "mmcloados=run mmcargs; " \ -- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -- "if run loadfdt; then " \ -- "bootz ${loadaddr} - ${fdtaddr}; " \ -- "else " \ -- "if test ${boot_fdt} = try; then " \ -- "bootz; " \ -- "else " \ -- "echo WARN: Cannot load the DT; " \ -- "fi; " \ -- "fi; " \ -- "else " \ -- "bootz; " \ -- "fi;\0" \ -- "mmcboot=mmc dev ${mmcdev}; " \ -- "if mmc rescan; then " \ -- "echo SD/MMC found on device ${mmcdev};" \ -- "if run loadbootenv; then " \ -- "echo Loaded environment from ${bootenv};" \ -- "run importbootenv;" \ -- "fi;" \ -- "if test -n $uenvcmd; then " \ -- "echo Running uenvcmd ...;" \ -- "run uenvcmd;" \ -- "fi;" \ -- "if run loadimage; then " \ -- "run mmcloados;" \ -- "fi;" \ -- "fi;\0" \ -+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ -+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ -+ "mmcboot=for devtype in mmc; do " \ -+ "for devnum in 0 1; do " \ -+ "if ${devtype} dev ${devnum}; then " \ -+ "echo ${devtype} found on device ${devnum};" \ -+ "setenv bootpart ${devnum}:1;" \ -+ "part uuid ${devtype} ${bootpart} uuid;" \ -+ "setenv root PARTUUID=${uuid} rw rootwait;" \ -+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \ -+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \ -+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \ -+ "echo Checking if uenvcmd is set ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "fi;" \ -+ "run scan_dev_for_boot;" \ -+ "if run loadimage; then " \ -+ "run mmcargs;" \ -+ "if run loadfdt; then " \ -+ "if run loadrd; then " \ -+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ -+ "else " \ -+ "bootz ${loadaddr} - ${fdtaddr};" \ -+ "fi;" \ -+ "fi;" \ -+ "else " \ -+ "echo No kernel found;" \ -+ "fi;" \ -+ "setexpr devnum ${devnum} + 1;" \ -+ "fi;" \ -+ "done;" \ -+ "done;\0" \ - "spiboot=echo Booting from spi ...; " \ - "run spiargs; " \ - "sf probe ${spibusno}:0; " \ -@@ -541,9 +540,6 @@ - #define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "run mmcboot;" \ -- "setenv mmcdev 1; " \ -- "setenv bootpart 1:2; " \ -- "run mmcboot;" \ - "run nandboot;" - - /* NS16550 Configuration */ diff --git a/libre/uboot4extlinux-chiliboard/PKGBUILD b/libre/uboot4extlinux-chiliboard/PKGBUILD deleted file mode 100644 index 0a2f97131..000000000 --- a/libre/uboot4extlinux-chiliboard/PKGBUILD +++ /dev/null @@ -1,62 +0,0 @@ -# U-Boot: ChiliBoard -# Maintainer: André Silva - -buildarch=4 - -pkgname=uboot4extlinux-chiliboard -pkgver=2014.07 -pkgrel=1 -pkgdesc="U-Boot with Extlinux support for ChiliBoard" -arch=('armv7h') -url="http://git.denx.de/u-boot.git/" -replaces=('uboot-chiliboard-linux-libre' 'uboot-chiliboard') -conflicts=('uboot-chiliboard-linux-libre' 'uboot-chiliboard' 'uboot4grub-chiliboard') -makedepends=('bc') -license=('GPL') -backup=(boot/extlinux/extlinux.conf) -install=${pkgname}.install -source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2" - '0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch' - '0002-ARM-asm-io.h-use-static-inline.patch' - '0003-common-main.c-make-show_boot_progress-__weak.patch' - '0004-common-board_f-cosmetic-use-__weak-for-leds.patch' - '0005-chiliboard-support.patch' - '0006-parabola-arm-modifications.patch' - 'extlinux.conf' - 'uEnv.txt') -md5sums=('36d4bad687edcafa396fee607e505d4e' - 'e070e8b5cf8628b6440dfc9dbd87cb65' - '318310de19110167fe15ceac3ae32f7d' - '1792346431786e1442c4059cd3f288ed' - '2a32a77f123391c02935754ced2743c2' - '5951c799b35c526f02edbcb3eb1295fc' - '35147d090738dd0c8104a565de0f404e' - '068f6b4e8047115e73f29af5f384889b' - '0afad1f6f3f8609db6e1f5bb322b2a1a') - -prepare() { - cd u-boot-${pkgver} - patch -Np1 -i ../0001-Add-linux-compiler-gcc5.h-to-fix-builds-with-gcc5.patch - patch -Np1 -i ../0002-ARM-asm-io.h-use-static-inline.patch - patch -Np1 -i ../0003-common-main.c-make-show_boot_progress-__weak.patch - patch -Np1 -i ../0004-common-board_f-cosmetic-use-__weak-for-leds.patch - patch -Np1 -i ../0005-chiliboard-support.patch - patch -Np1 -i ../0006-parabola-arm-modifications.patch -} - -build() { - cd u-boot-${pkgver} - - unset CFLAGS CXXFLAGS LDFLAGS - - make distclean - make chiliboard_config - make -} - -package() { - cd u-boot-${pkgver} - mkdir -p "${pkgdir}"/boot/extlinux - cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot - cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux -} diff --git a/libre/uboot4extlinux-chiliboard/extlinux.conf b/libre/uboot4extlinux-chiliboard/extlinux.conf deleted file mode 100644 index 52de94d49..000000000 --- a/libre/uboot4extlinux-chiliboard/extlinux.conf +++ /dev/null @@ -1,46 +0,0 @@ -menu title Welcome to U-Boot with Extlinux support! - -label Parabola GNU/Linux-libre, linux-libre kernel - kernel /boot/vmlinuz-linux-libre - append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 - fdtdir /boot/dtbs/linux-libre - -#label Parabola GNU/Linux-libre, linux-libre-lts kernel -# kernel /boot/vmlinuz-linux-libre-lts -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-lts - -#label Parabola GNU/Linux-libre, linux-libre-knock kernel -# kernel /boot/vmlinuz-linux-libre-knock -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-knock - -#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel -# kernel /boot/vmlinuz-linux-libre-lts-knock -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-lts-knock - -#label Parabola GNU/Linux-libre, linux-libre-grsec kernel -# kernel /boot/vmlinuz-linux-libre-grsec -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-grsec - -#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel -# kernel /boot/vmlinuz-linux-libre-grsec-knock -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-grsec-knock - -#label Parabola GNU/Linux-libre, linux-libre-audit kernel -# kernel /boot/vmlinuz-linux-libre-audit -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-audit - -#label Parabola GNU/Linux-libre, linux-libre-pck kernel -# kernel /boot/vmlinuz-linux-libre-pck -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-pck - -#label Parabola GNU/Linux-libre, linux-libre-rt kernel -# kernel /boot/vmlinuz-linux-libre-rt -# append root=/dev/mmcblk0p1 rw console=ttyO0,115200n8 -# fdtdir /boot/dtbs/linux-libre-rt diff --git a/libre/uboot4extlinux-chiliboard/uEnv.txt b/libre/uboot4extlinux-chiliboard/uEnv.txt deleted file mode 100644 index a9f26096d..000000000 --- a/libre/uboot4extlinux-chiliboard/uEnv.txt +++ /dev/null @@ -1 +0,0 @@ -optargs= diff --git a/libre/uboot4extlinux-chiliboard/uboot4extlinux-chiliboard.install b/libre/uboot4extlinux-chiliboard/uboot4extlinux-chiliboard.install deleted file mode 100644 index 4467c694e..000000000 --- a/libre/uboot4extlinux-chiliboard/uboot4extlinux-chiliboard.install +++ /dev/null @@ -1,37 +0,0 @@ -flash_instructions() { - echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k" - echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k" -} - -extlinux_warning() { - echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf" -} - -flash_uboot() { - root=$(mount | awk '/ on \/ / { print $1; }') - if [[ $root =~ ^/dev/mmcblk.*$ ]]; then - root=${root:0:12} - echo "A new U-Boot version needs to be flashed onto $root." - echo "Do this now? [y|N]" - read -r shouldwe - if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then - dd if=/boot/MLO of=$root count=1 seek=1 conv=notrunc bs=128k - dd if=/boot/u-boot.img of=$root count=2 seek=1 conv=notrunc bs=384k - else - echo "You can do this later by running:" - flash_instructions - fi - else - echo "Flash the new U-Boot version onto your boot device. For example:" - flash_instructions - fi - extlinux_warning -} - -post_install() { - flash_uboot -} - -post_upgrade() { - flash_uboot -} diff --git a/libre/uboot4extlinux-omap3_beagle/0001-parabola-arm-modifications.patch b/libre/uboot4extlinux-omap3_beagle/0001-parabola-arm-modifications.patch deleted file mode 100644 index c99cd89b8..000000000 --- a/libre/uboot4extlinux-omap3_beagle/0001-parabola-arm-modifications.patch +++ /dev/null @@ -1,312 +0,0 @@ -diff -Nur u-boot-2016.01.orig/board/ti/beagle/beagle.c u-boot-2016.01/board/ti/beagle/beagle.c ---- u-boot-2016.01.orig/board/ti/beagle/beagle.c 2016-01-12 11:06:54.000000000 -0300 -+++ u-boot-2016.01/board/ti/beagle/beagle.c 2016-02-24 19:45:05.779336247 -0300 -@@ -56,6 +56,7 @@ - #define BBTOYS_WIFI 0x01000B00 - #define BBTOYS_VGA 0x02000B00 - #define BBTOYS_LCD 0x03000B00 -+#define BBTOYS_ULCD 0x04000B00 - #define BCT_BRETTL3 0x01000F00 - #define BCT_BRETTL4 0x02000F00 - #define LSR_COM6L_ADPT 0x01001300 -@@ -211,25 +212,25 @@ - * bus 1 for the availability of an AT24C01B serial EEPROM. - * returns the device_vendor field from the EEPROM - */ --static unsigned int get_expansion_id(void) -+static unsigned int get_expansion_id(int eeprom_address) - { - i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS); - - /* return BEAGLE_NO_EEPROM if eeprom doesn't respond */ -- if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) { -+ if (i2c_probe(eeprom_address) == 1) { - i2c_set_bus_num(TWL4030_I2C_BUS); - return BEAGLE_NO_EEPROM; - } - - /* read configuration data */ -- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config, -+ i2c_read(eeprom_address, 0, 1, (u8 *)&expansion_config, - sizeof(expansion_config)); - - /* retry reading configuration data with 16bit addressing */ - if ((expansion_config.device_vendor == 0xFFFFFF00) || - (expansion_config.device_vendor == 0xFFFFFFFF)) { - printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n"); -- i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config, -+ i2c_read(eeprom_address, 0, 2, (u8 *)&expansion_config, - sizeof(expansion_config)); - } - -@@ -341,15 +342,18 @@ - case REVISION_AXBX: - printf("Beagle Rev Ax/Bx\n"); - setenv("beaglerev", "AxBx"); -+ setenv("musb", "musb_hdrc.fifo_mode=5"); - break; - case REVISION_CX: - printf("Beagle Rev C1/C2/C3\n"); - setenv("beaglerev", "Cx"); -+ setenv("musb", "musb_hdrc.fifo_mode=5"); - MUX_BEAGLE_C(); - break; - case REVISION_C4: - printf("Beagle Rev C4\n"); - setenv("beaglerev", "C4"); -+ setenv("musb", "musb_hdrc.fifo_mode=5"); - MUX_BEAGLE_C(); - /* Set VAUX2 to 1.8V for EHCI PHY */ - twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, -@@ -390,7 +394,7 @@ - generate_fake_mac = true; - } - -- switch (get_expansion_id()) { -+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS)) { - case TINCANTOOLS_ZIPPY: - printf("Recognized Tincantools Zippy board (rev %d %s)\n", - expansion_config.revision, -@@ -471,6 +475,30 @@ - } - - if (expansion_config.content == 1) -+ setenv(expansion_config.env_var, expansion_config.env_setting); -+ -+ /* Scan 0x51 as well for loop-thru boards */ -+ switch (get_expansion_id(EXPANSION_EEPROM_I2C_ADDRESS + 1)) { -+ case BBTOYS_ULCD: -+ printf("Recognized BeagleBoardToys uLCD-lite board\n"); -+ setenv("buddy2", "bbtoys-ulcd"); -+ setenv("defaultdisplay", "dvi"); -+ setenv("dvimode", "800x480MR-16@60"); -+ setenv("lcd1", "i2c mw 40 00 00; i2c mw 40 04 80; i2c mw 40 0d 05"); -+ setenv("lcdcmd", "i2c dev 1 ; run lcd1; i2c dev 0"); -+ setenv("kmsmode", "video=DVI-D-1:800x480"); -+ break; -+ case BEAGLE_NO_EEPROM: -+ printf("No EEPROM on expansion board\n"); -+ setenv("buddy2", "none"); -+ break; -+ default: -+ printf("Unrecognized expansion board: %x\n", -+ expansion_config.device_vendor); -+ setenv("buddy2", "unknown"); -+ } -+ -+ if (expansion_config.content == 1) - setenv(expansion_config.env_var, expansion_config.env_setting); - - twl4030_power_init(); -diff -Nur u-boot-2016.01.orig/include/configs/omap3_beagle.h u-boot-2016.01/include/configs/omap3_beagle.h ---- u-boot-2016.01.orig/include/configs/omap3_beagle.h 2016-01-12 11:06:54.000000000 -0300 -+++ u-boot-2016.01/include/configs/omap3_beagle.h 2016-02-24 19:50:25.959802093 -0300 -@@ -91,6 +91,12 @@ - #define CONFIG_USB_ETHER_MCS7830 - #define CONFIG_USB_ETHER_SMSC95XX - -+/* Parabola GNU/Linux-libre extras */ -+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre" -+#define CONFIG_SUPPORT_RAW_INITRD -+#define CONFIG_CMD_PART -+#define CONFIG_PARTITION_UUIDS -+ - /* GPIO banks */ - #define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ - #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ -@@ -124,51 +130,71 @@ - #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ - /* devices */ - -+/* Enable Extlinux boot support */ -+#define CONFIG_CMD_PXE -+#define CONFIG_MENU -+#define BOOT_TARGET_DEVICES(func) -+#include -+ - #define CONFIG_EXTRA_ENV_SETTINGS \ -- "loadaddr=0x80200000\0" \ -- "rdaddr=0x81000000\0" \ -+ BOOTENV \ -+ "loadaddr=0x82000000\0" \ -+ "rdaddr=0x88080000\0" \ - "fdt_high=0xffffffff\0" \ -- "fdtaddr=0x80f80000\0" \ -- "usbtty=cdc_acm\0" \ -- "bootfile=uImage\0" \ -- "ramdisk=ramdisk.gz\0" \ -- "bootdir=/boot\0" \ -- "bootpart=0:2\0" \ -+ "fdtaddr=0x88000000\0" \ - "console=ttyO2,115200n8\0" \ -- "mpurate=auto\0" \ -- "buddy=none\0" \ -- "optargs=\0" \ -- "camera=none\0" \ -- "vram=12M\0" \ -- "dvimode=640x480MR-16@60\0" \ -- "defaultdisplay=dvi\0" \ -+ "fdtfile=undefined\0" \ -+ "bootpart=0:1\0" \ -+ "bootdir=\0" \ -+ "fdtdir=/dtbs\0" \ -+ "bootfile=zImage\0" \ -+ "rdfile=initramfs-linux.img\0" \ - "mmcdev=0\0" \ -- "mmcroot=/dev/mmcblk0p2 rw\0" \ -- "mmcrootfstype=ext3 rootwait\0" \ -- "nandroot=ubi0:rootfs ubi.mtd=4\0" \ -- "nandrootfstype=ubifs\0" \ -- "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \ -- "ramrootfstype=ext2\0" \ -+ "optargs=\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ -- "mpurate=${mpurate} " \ -- "buddy=${buddy} "\ -- "camera=${camera} "\ -- "vram=${vram} " \ -- "omapfb.mode=dvi:${dvimode} " \ -- "omapdss.def_disp=${defaultdisplay} " \ -- "root=${mmcroot} " \ -- "rootfstype=${mmcrootfstype}\0" \ -- "nandargs=setenv bootargs console=${console} " \ -- "${optargs} " \ -- "mpurate=${mpurate} " \ -- "buddy=${buddy} "\ -- "camera=${camera} "\ -- "vram=${vram} " \ -- "omapfb.mode=dvi:${dvimode} " \ -- "omapdss.def_disp=${defaultdisplay} " \ -- "root=${nandroot} " \ -- "rootfstype=${nandrootfstype}\0" \ -+ "root=${root} " \ -+ "${musb} " \ -+ "${cmdline}\0" \ -+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ -+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ -+ "mmcboot=usb start;" \ -+ "for devtype in mmc usb; do " \ -+ "setenv devnum 0;" \ -+ "while ${devtype} dev ${devnum}; do " \ -+ "echo ${devtype} found on device ${devnum};" \ -+ "setenv bootpart ${devnum}:1;" \ -+ "if test ${devtype} = mmc; then part uuid mmc ${devnum}:2 uuid; else part uuid ${devtype} ${devnum}:1 uuid; fi;" \ -+ "part uuid ${devtype} ${rootpart} uuid;" \ -+ "setenv root PARTUUID=${uuid} rw rootwait;" \ -+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \ -+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \ -+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \ -+ "echo Checking if uenvcmd is set ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "fi;" \ -+ "run scan_dev_for_boot;" \ -+ "if run loadimage; then " \ -+ "run mmcargs;" \ -+ "if run loadfdt; then " \ -+ "if run loadrd; then " \ -+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ -+ "else " \ -+ "bootz ${loadaddr} - ${fdtaddr};" \ -+ "fi;" \ -+ "fi;" \ -+ "else " \ -+ "echo No kernel found;" \ -+ "fi;" \ -+ "setexpr devnum ${devnum} + 1;" \ -+ "done;" \ -+ "done;\0" \ - "findfdt=" \ - "if test $beaglerev = AxBx; then " \ - "setenv fdtfile omap3-beagle.dtb; fi; " \ -@@ -181,81 +207,11 @@ - "if test $beaglerev = xMC; then " \ - "setenv fdtfile omap3-beagle-xm.dtb; fi; " \ - "if test $fdtfile = undefined; then " \ -- "echo WARNING: Could not determine device tree to use; fi; \0" \ -- "validatefdt=" \ -- "if test $beaglerev = xMAB; then " \ -- "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \ -- "setenv fdtfile omap3-beagle-xm.dtb; " \ -- "fi; " \ -- "fi; \0" \ -- "bootenv=uEnv.txt\0" \ -- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ -- "importbootenv=echo Importing environment from mmc ...; " \ -- "env import -t -r $loadaddr $filesize\0" \ -- "ramargs=setenv bootargs console=${console} " \ -- "${optargs} " \ -- "mpurate=${mpurate} " \ -- "buddy=${buddy} "\ -- "vram=${vram} " \ -- "omapfb.mode=dvi:${dvimode} " \ -- "omapdss.def_disp=${defaultdisplay} " \ -- "root=${ramroot} " \ -- "rootfstype=${ramrootfstype}\0" \ -- "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \ -- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ -- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ -- "source ${loadaddr}\0" \ -- "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ -- "mmcboot=echo Booting from mmc ...; " \ -- "run mmcargs; " \ -- "bootm ${loadaddr}\0" \ -- "mmcbootz=echo Booting with DT from mmc${mmcdev} ...; " \ -- "run mmcargs; " \ -- "bootz ${loadaddr} - ${fdtaddr}\0" \ -- "nandboot=echo Booting from nand ...; " \ -- "run nandargs; " \ -- "nand read ${loadaddr} 280000 400000; " \ -- "bootm ${loadaddr}\0" \ -- "ramboot=echo Booting from ramdisk ...; " \ -- "run ramargs; " \ -- "bootm ${loadaddr}\0" \ -- "userbutton=if gpio input 173; then run userbutton_xm; " \ -- "else run userbutton_nonxm; fi;\0" \ -- "userbutton_xm=gpio input 4;\0" \ -- "userbutton_nonxm=gpio input 7;\0" --/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */ -+ "echo WARNING: Could not determine device tree to use; fi; \0" -+ - #define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ -- "mmc dev ${mmcdev}; if mmc rescan; then " \ -- "if run userbutton; then " \ -- "setenv bootenv uEnv.txt;" \ -- "else " \ -- "setenv bootenv user.txt;" \ -- "fi;" \ -- "echo SD/MMC found on device ${mmcdev};" \ -- "if run loadbootenv; then " \ -- "echo Loaded environment from ${bootenv};" \ -- "run importbootenv;" \ -- "fi;" \ -- "if test -n $uenvcmd; then " \ -- "echo Running uenvcmd ...;" \ -- "run uenvcmd;" \ -- "fi;" \ -- "if run loadbootscript; then " \ -- "run bootscript; " \ -- "else " \ -- "if run loadimage; then " \ -- "run mmcboot;" \ -- "fi;" \ -- "fi; " \ -- "fi;" \ -- "run nandboot;" \ -- "setenv bootfile zImage;" \ -- "if run loadimage; then " \ -- "run loadfdt;" \ -- "run mmcbootz; " \ -- "fi; " \ -+ "run mmcboot" - - /* - * OMAP3 has 12 GP timers, they can be driven by the system clock diff --git a/libre/uboot4extlinux-omap3_beagle/PKGBUILD b/libre/uboot4extlinux-omap3_beagle/PKGBUILD deleted file mode 100644 index a3c16f7cc..000000000 --- a/libre/uboot4extlinux-omap3_beagle/PKGBUILD +++ /dev/null @@ -1,51 +0,0 @@ -# U-Boot: BeagleBoard and BeagleBoard-xM -# Maintainer: André Silva - -buildarch=4 - -pkgname=uboot4extlinux-omap3_beagle -pkgver=2016.01 -pkgrel=1 -pkgdesc="U-Boot with Extlinux support for BeagleBoard and BeagleBoard-xM" -arch=('armv7h') -url="http://git.denx.de/u-boot.git/" -license=('GPL') -replaces=('uboot-beagleboard-linux-libre' 'uboot-beagleboard-linux-libre-lts' - 'uboot-beagleboard-linux-libre-grsec' 'uboot-beagleboard-linux-libre-pck' - 'uboot-beagleboard' 'uboot-omap3_beagle') -conflicts=('uboot-beagleboard-linux-libre' 'uboot-beagleboard-linux-libre-lts' - 'uboot-beagleboard-linux-libre-grsec' 'uboot-beagleboard-linux-libre-pck' - 'uboot-beagleboard' 'uboot-omap3_beagle' 'uboot4grub-omap3_beagle') -makedepends=('bc') -backup=(boot/extlinux/extlinux.conf) -install=${pkgname}.install -source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2" - '0001-parabola-arm-modifications.patch' - 'extlinux.conf' - 'uEnv.txt') -md5sums=('7d4f65fd43d4d706f5c5650e020d899d' - 'da3d52f785bce02602f88fb85f74de2f' - '5172c86fd491728aad8109ebb8a997f8' - 'd41d8cd98f00b204e9800998ecf8427e') - -prepare() { - cd u-boot-${pkgver} - patch -Np1 -i ../0001-parabola-arm-modifications.patch -} - -build() { - cd u-boot-${pkgver} - - unset LDFLAGS CFLAGS CXXFLAGS - - make distclean - make omap3_beagle_config - make -} - -package() { - cd u-boot-${pkgver} - mkdir -p "${pkgdir}"/boot/extlinux - cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot - cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux -} diff --git a/libre/uboot4extlinux-omap3_beagle/extlinux.conf b/libre/uboot4extlinux-omap3_beagle/extlinux.conf deleted file mode 100644 index 708bfcddb..000000000 --- a/libre/uboot4extlinux-omap3_beagle/extlinux.conf +++ /dev/null @@ -1,46 +0,0 @@ -menu title Welcome to U-Boot with Extlinux support! - -label Parabola GNU/Linux-libre, linux-libre kernel - kernel /vmlinuz-linux-libre - append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 - fdtdir /dtbs/linux-libre - -#label Parabola GNU/Linux-libre, linux-libre-lts kernel -# kernel /vmlinuz-linux-libre-lts -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /dtbs/linux-libre-lts - -#label Parabola GNU/Linux-libre, linux-libre-knock kernel -# kernel /vmlinuz-linux-libre-knock -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /dtbs/linux-libre-knock - -#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel -# kernel /vmlinuz-linux-libre-lts-knock -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /dtbs/linux-libre-lts-knock - -#label Parabola GNU/Linux-libre, linux-libre-grsec kernel -# kernel /vmlinuz-linux-libre-grsec -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /dtbs/linux-libre-grsec - -#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel -# kernel /vmlinuz-linux-libre-grsec-knock -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /dtbs/linux-libre-grsec-knock - -#label Parabola GNU/Linux-libre, linux-libre-audit kernel -# kernel /vmlinuz-linux-libre-audit -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /dtbs/linux-libre-audit - -#label Parabola GNU/Linux-libre, linux-libre-pck kernel -# kernel /vmlinuz-linux-libre-pck -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /dtbs/linux-libre-pck - -#label Parabola GNU/Linux-libre, linux-libre-rt kernel -# kernel /vmlinuz-linux-libre-rt -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /dtbs/linux-libre-rt diff --git a/libre/uboot4extlinux-omap3_beagle/uEnv.txt b/libre/uboot4extlinux-omap3_beagle/uEnv.txt deleted file mode 100644 index e69de29bb..000000000 diff --git a/libre/uboot4extlinux-omap3_beagle/uboot4extlinux-omap3_beagle.install b/libre/uboot4extlinux-omap3_beagle/uboot4extlinux-omap3_beagle.install deleted file mode 100644 index 8aff26699..000000000 --- a/libre/uboot4extlinux-omap3_beagle/uboot4extlinux-omap3_beagle.install +++ /dev/null @@ -1,11 +0,0 @@ -extlinux_warning() { - echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf" -} - -post_install() { - extlinux_warning -} - -post_upgrade() { - extlinux_warning -} diff --git a/libre/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch b/libre/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch deleted file mode 100644 index 09aee7ce0..000000000 --- a/libre/uboot4extlinux-omap4_panda/0001-parabola-arm-modifications.patch +++ /dev/null @@ -1,135 +0,0 @@ -diff -Nur u-boot-2016.01.orig/include/configs/ti_omap4_common.h u-boot-2016.01/include/configs/ti_omap4_common.h ---- u-boot-2016.01.orig/include/configs/ti_omap4_common.h 2016-01-12 11:06:54.000000000 -0300 -+++ u-boot-2016.01/include/configs/ti_omap4_common.h 2016-02-24 23:19:09.761629260 -0300 -@@ -46,7 +46,6 @@ - * the timings to use or use pre-determined timings (based on using the - * dynamic method. Default to the static timing infomation. - */ --#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - #define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION - #define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -@@ -79,33 +78,74 @@ - #define CONFIG_USB_TTY 1 - #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 - -+/* Parabola GNU/Linux-libre extras */ -+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre" -+ -+/* Enable Extlinux boot support */ -+#define CONFIG_CMD_PXE -+#define CONFIG_MENU -+#define BOOT_TARGET_DEVICES(func) -+#include -+ - /* - * Environment setup - */ - #define CONFIG_EXTRA_ENV_SETTINGS \ -+ BOOTENV \ - DEFAULT_LINUX_BOOT_ENV \ - DEFAULT_MMC_TI_ARGS \ - "console=ttyO2,115200n8\0" \ - "fdtfile=undefined\0" \ - "bootpart=0:2\0" \ - "bootdir=/boot\0" \ -+ "fdtdir=/boot/dtbs\0" \ - "bootfile=zImage\0" \ -+ "rdfile=initramfs-linux.img\0" \ - "usbtty=cdc_acm\0" \ - "vram=16M\0" \ -- "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ -- "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ -- "source ${loadaddr}\0" \ -- "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ -- "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ -- "env import -t ${loadaddr} ${filesize}\0" \ -- "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -- "loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \ -- "mmcboot=echo Booting from mmc${mmcdev} ...; " \ -- "run args_mmc; " \ -- "bootz ${loadaddr} - ${fdtaddr}\0" \ -- "uimageboot=echo Booting from mmc${mmcdev} ...; " \ -- "run args_mmc; " \ -- "bootm ${loadaddr}\0" \ -+ "optargs=\0" \ -+ "mmcargs=setenv bootargs console=${console} " \ -+ "vram=${vram} " \ -+ "root=${root} " \ -+ "${optargs}\0" \ -+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ -+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ -+ "mmcboot=usb start;" \ -+ "for devtype in mmc usb; do " \ -+ "setenv devnum 0;" \ -+ "while ${devtype} dev ${devnum}; do " \ -+ "echo ${devtype} found on device ${devnum};" \ -+ "setenv bootpart ${devnum}:1;" \ -+ "part uuid ${devtype} ${bootpart} uuid;" \ -+ "setenv root PARTUUID=${uuid} rw rootwait;" \ -+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \ -+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \ -+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \ -+ "echo Checking if uenvcmd is set ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "fi;" \ -+ "run scan_dev_for_boot;" \ -+ "if run loadimage; then " \ -+ "run mmcargs;" \ -+ "if run loadfdt; then " \ -+ "if run loadrd; then " \ -+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ -+ "else " \ -+ "bootz ${loadaddr} - ${fdtaddr};" \ -+ "fi;" \ -+ "fi;" \ -+ "else " \ -+ "echo No kernel found;" \ -+ "fi;" \ -+ "setexpr devnum ${devnum} + 1;" \ -+ "done;" \ -+ "done;\0" \ - "findfdt="\ - "if test $board_name = sdp4430; then " \ - "setenv fdtfile omap4-sdp.dtb; fi; " \ -@@ -118,32 +158,11 @@ - "if test $board_name = duovero; then " \ - "setenv fdtfile omap4-duovero-parlor.dtb; fi;" \ - "if test $fdtfile = undefined; then " \ -- "echo WARNING: Could not determine device tree to use; fi; \0" \ -- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ -+ "echo WARNING: Could not determine device tree to use; fi; \0" - - #define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ -- "mmc dev ${mmcdev}; if mmc rescan; then " \ -- "echo SD/MMC found on device ${mmcdev};" \ -- "if run loadbootscript; then " \ -- "run bootscript; " \ -- "else " \ -- "if run loadbootenv; then " \ -- "run importbootenv; " \ -- "fi;" \ -- "if test -n ${uenvcmd}; then " \ -- "echo Running uenvcmd ...;" \ -- "run uenvcmd;" \ -- "fi;" \ -- "fi;" \ -- "if run loadimage; then " \ -- "run loadfdt;" \ -- "run mmcboot; " \ -- "fi; " \ -- "if run loaduimage; then " \ -- "run uimageboot;" \ -- "fi; " \ -- "fi" -+ "run mmcboot" - - /* - * Defines for SPL diff --git a/libre/uboot4extlinux-omap4_panda/PKGBUILD b/libre/uboot4extlinux-omap4_panda/PKGBUILD deleted file mode 100644 index cf9132074..000000000 --- a/libre/uboot4extlinux-omap4_panda/PKGBUILD +++ /dev/null @@ -1,49 +0,0 @@ -# U-Boot: PandaBoard and PandaBoard ES -# Maintainer: André Silva - -buildarch=4 - -pkgname=uboot4extlinux-omap4_panda -pkgver=2016.01 -pkgrel=1 -pkgdesc="U-Boot with Extlinux support for PandaBoard and PandaBoard ES" -arch=('armv7h') -url="http://git.denx.de/u-boot.git/" -replaces=('uboot-pandaboard-linux-libre' 'uboot-pandaboard' 'uboot-omap4_panda') -conflicts=('uboot-pandaboard-linux-libre' 'uboot-pandaboard' 'uboot-omap4_panda' 'uboot4grub-omap4_panda') -makedepends=('bc') -license=('GPL') -install=${pkgname}.install -backup=('boot/extlinux/extlinux.conf' 'boot/uEnv.txt') -source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2" - '0001-parabola-arm-modifications.patch' - 'extlinux.conf' - 'uEnv.txt') -md5sums=('7d4f65fd43d4d706f5c5650e020d899d' - 'b74e858feeed48acaba5ac0548d675ca' - '12c61073bb860f4c8d8ec59145c267ed' - '86004660f2912861a040e335c9c0e85b') - -prepare() { - cd u-boot-${pkgver} - - patch -Np1 -i ../0001-parabola-arm-modifications.patch -} - -build() { - cd u-boot-${pkgver} - - unset LDFLAGS - - make distclean - make omap4_panda_config - make -} - -package() { - cd u-boot-${pkgver} - - mkdir -p "${pkgdir}"/boot/extlinux - cp MLO u-boot.img "${srcdir}"/uEnv.txt "${pkgdir}"/boot - cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux -} diff --git a/libre/uboot4extlinux-omap4_panda/extlinux.conf b/libre/uboot4extlinux-omap4_panda/extlinux.conf deleted file mode 100644 index 725121811..000000000 --- a/libre/uboot4extlinux-omap4_panda/extlinux.conf +++ /dev/null @@ -1,46 +0,0 @@ -menu title Welcome to U-Boot with Extlinux support! - -label Parabola GNU/Linux-libre, linux-libre kernel - kernel /boot/vmlinuz-linux-libre - append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 - fdtdir /boot/dtbs/linux-libre - -#label Parabola GNU/Linux-libre, linux-libre-lts kernel -# kernel /boot/vmlinuz-linux-libre-lts -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /boot/dtbs/linux-libre-lts - -#label Parabola GNU/Linux-libre, linux-libre-knock kernel -# kernel /boot/vmlinuz-linux-libre-knock -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /boot/dtbs/linux-libre-knock - -#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel -# kernel /boot/vmlinuz-linux-libre-lts-knock -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /boot/dtbs/linux-libre-lts-knock - -#label Parabola GNU/Linux-libre, linux-libre-grsec kernel -# kernel /boot/vmlinuz-linux-libre-grsec -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /boot/dtbs/linux-libre-grsec - -#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel -# kernel /boot/vmlinuz-linux-libre-grsec-knock -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /boot/dtbs/linux-libre-grsec-knock - -#label Parabola GNU/Linux-libre, linux-libre-audit kernel -# kernel /boot/vmlinuz-linux-libre-audit -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /boot/dtbs/linux-libre-audit - -#label Parabola GNU/Linux-libre, linux-libre-pck kernel -# kernel /boot/vmlinuz-linux-libre-pck -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /boot/dtbs/linux-libre-pck - -#label Parabola GNU/Linux-libre, linux-libre-rt kernel -# kernel /boot/vmlinuz-linux-libre-rt -# append root=/dev/mmcblk0p1 rw console=ttyO2,115200n8 -# fdtdir /boot/dtbs/linux-libre-rt diff --git a/libre/uboot4extlinux-omap4_panda/uEnv.txt b/libre/uboot4extlinux-omap4_panda/uEnv.txt deleted file mode 100644 index 55298e1a9..000000000 --- a/libre/uboot4extlinux-omap4_panda/uEnv.txt +++ /dev/null @@ -1,2 +0,0 @@ -# Uncomment and add any additional kernel parameters to optargs -#optargs= diff --git a/libre/uboot4extlinux-omap4_panda/uboot4extlinux-omap4_panda.install b/libre/uboot4extlinux-omap4_panda/uboot4extlinux-omap4_panda.install deleted file mode 100644 index 771f1f0b3..000000000 --- a/libre/uboot4extlinux-omap4_panda/uboot4extlinux-omap4_panda.install +++ /dev/null @@ -1,26 +0,0 @@ -extlinux_warning() { - echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf" -} - -flash_uboot() { - echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0." - echo "Do this now? [y|N]" - read -r shouldwe - if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then - dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k - dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k - else - echo "You can do this later by running:" - echo "# dd if=/boot/MLO of=/dev/mmcblk0 count=1 seek=1 conv=notrunc bs=128k" - echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 count=2 seek=1 conv=notrunc bs=384k" - fi - extlinux_warning -} - -post_install() { - flash_uboot -} - -post_upgrade() { - flash_uboot -} diff --git a/libre/uboot4extlinux-sunxi/0001-parabola-arm-modifications.patch b/libre/uboot4extlinux-sunxi/0001-parabola-arm-modifications.patch deleted file mode 100644 index 5b59f18af..000000000 --- a/libre/uboot4extlinux-sunxi/0001-parabola-arm-modifications.patch +++ /dev/null @@ -1,66 +0,0 @@ -diff -Nur u-boot-2016.01.orig/include/config_distro_defaults.h u-boot-2016.01/include/config_distro_defaults.h ---- u-boot-2016.01.orig/include/config_distro_defaults.h 2016-01-12 11:06:54.000000000 -0300 -+++ u-boot-2016.01/include/config_distro_defaults.h 2016-02-26 13:23:28.880315683 -0300 -@@ -67,4 +67,7 @@ - #define CONFIG_SUPPORT_RAW_INITRD - #define CONFIG_SYS_HUSH_PARSER - -+#define CONFIG_CMD_PART -+#define CONFIG_PARTITION_UUIDS -+ - #endif /* _CONFIG_CMD_DISTRO_DEFAULTS_H */ -diff -Nur u-boot-2016.01.orig/include/configs/sunxi-common.h u-boot-2016.01/include/configs/sunxi-common.h ---- u-boot-2016.01.orig/include/configs/sunxi-common.h 2016-01-12 11:06:54.000000000 -0300 -+++ u-boot-2016.01/include/configs/sunxi-common.h 2016-02-26 14:37:41.077919620 -0300 -@@ -173,7 +173,7 @@ - #define CONFIG_SYS_NO_FLASH - - #define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */ --#define CONFIG_IDENT_STRING " Allwinner Technology" -+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre" - - #define CONFIG_ENV_OFFSET (544 << 10) /* (8 + 24 + 512) KiB */ - #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -@@ -449,6 +449,9 @@ - #define BOOTENV_DEV_NAME_FEL(devtypeu, devtypel, instance) \ - "fel " - -+/* Enable Extlinux boot support */ -+#define CONFIG_CMD_PXE -+#define CONFIG_MENU - #define BOOT_TARGET_DEVICES(func) \ - func(FEL, fel, na) \ - BOOT_TARGET_DEVICES_MMC(func) \ -@@ -457,6 +460,7 @@ - BOOT_TARGET_DEVICES_USB(func) \ - func(PXE, pxe, na) \ - func(DHCP, dhcp, na) -+#include - - #ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT - #define BOOTCMD_SUNXI_COMPAT \ -@@ -474,8 +478,6 @@ - #define BOOTCMD_SUNXI_COMPAT - #endif - --#include -- - #ifdef CONFIG_USB_KEYBOARD - #define CONSOLE_STDIN_SETTINGS \ - "preboot=usb start\0" \ -@@ -500,13 +502,13 @@ - CONSOLE_STDOUT_SETTINGS - - #define CONFIG_EXTRA_ENV_SETTINGS \ -+ BOOTENV \ - CONSOLE_ENV_SETTINGS \ - MEM_LAYOUT_ENV_SETTINGS \ - DFU_ALT_INFO_RAM \ - "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ - "console=ttyS0,115200\0" \ -- BOOTCMD_SUNXI_COMPAT \ -- BOOTENV -+ BOOTCMD_SUNXI_COMPAT - - #else /* ifndef CONFIG_SPL_BUILD */ - #define CONFIG_EXTRA_ENV_SETTINGS diff --git a/libre/uboot4extlinux-sunxi/PKGBUILD b/libre/uboot4extlinux-sunxi/PKGBUILD deleted file mode 100644 index 7c82f57e8..000000000 --- a/libre/uboot4extlinux-sunxi/PKGBUILD +++ /dev/null @@ -1,237 +0,0 @@ -# U-Boot: sunXi -# Maintainer: André Silva - -buildarch=4 - -pkgbase=uboot4extlinux-sunxi -pkgname=('uboot4extlinux-a10-olinuxino-lime' - 'uboot4extlinux-a10s-olinuxino-micro' - 'uboot4extlinux-a13-olinuxino' - 'uboot4extlinux-a13-olinuxino-micro' - 'uboot4extlinux-a20-olinuxino-lime' - 'uboot4extlinux-a20-olinuxino-lime2' - 'uboot4extlinux-a20-olinuxino-micro' - 'uboot4extlinux-cubieboard' - 'uboot4extlinux-cubieboard2' - 'uboot4extlinux-cubietruck' - 'uboot4extlinux-pcduino' - 'uboot4extlinux-pcduino3' - 'uboot4extlinux-pcduino3-nano') -pkgver=2016.01 -pkgrel=1 -arch=('armv7h') -url="http://git.denx.de/u-boot.git/" -license=('GPL') -makedepends=('bc' 'dtc') -backup=(boot/extlinux/extlinux.conf) -source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2" - '0001-parabola-arm-modifications.patch' - 'extlinux.conf') -md5sums=('7d4f65fd43d4d706f5c5650e020d899d' - '8cac8444bd1d229063a150d212cc360a' - 'acd3e7b3c45c2801c2435f4a5de3f58c') - -boards=('A10-OLinuXino-Lime' - 'A10s-OLinuXino-M' - 'A13-OLinuXino' - 'A13-OLinuXinoM' - 'A20-OLinuXino-Lime' - 'A20-OLinuXino-Lime2' - 'A20-OLinuXino_MICRO' - 'Cubieboard' - 'Cubieboard2' - 'Cubietruck' - 'Linksprite_pcDuino' - 'Linksprite_pcDuino3' - 'Linksprite_pcDuino3_Nano') - -prepare() { - cd u-boot-${pkgver} - - patch -Np1 -i ../0001-parabola-arm-modifications.patch -} - -build() { - cd u-boot-${pkgver} - - unset CFLAGS - unset CXXFLAGS - unset LDFLAGS - - for i in ${boards[@]}; do - mkdir ../bin_${i} - make distclean - make ${i}_config - make EXTRAVERSION=-${pkgrel} - mv u-boot-sunxi-with-spl.bin ../bin_${i} - done -} - -package_uboot4extlinux-a10-olinuxino-lime() { - pkgdesc="U-Boot with Extlinux support for A10 OLinuXino Lime" - install=${pkgbase}.install - provides=('uboot-sunxi') - conflicts=('uboot-sunxi' 'uboot-a10-olinuxino-lime' 'uboot-a10-olinuxino-lime-linux-libre') - replaces=('uboot-a10-olinuxino-lime' 'uboot-a10-olinuxino-lime-linux-libre' 'uboot4grub-a10-olinuxino-lime') - - install -d "${pkgdir}"/boot/extlinux - install -Dm644 bin_A10-OLinuXino-Lime/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot - - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux -} - -package_uboot4extlinux-a10s-olinuxino-micro() { - pkgdesc="U-Boot with Extlinux support for A10s OLinuXino Micro" - install=${pkgbase}.install - provides=('uboot-sunxi') - conflicts=('uboot-sunxi' 'uboot-a10s-olinuxino-micro' 'uboot-a10s-olinuxino-micro-linux-libre') - replaces=('uboot-a10s-olinuxino-micro' 'uboot-a10s-olinuxino-micro-linux-libre' 'uboot4grub-a10s-olinuxino-micro') - - install -d "${pkgdir}"/boot/extlinux - install -Dm644 bin_A10s-OLinuXino-M/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot - - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux -} - -package_uboot4extlinux-a13-olinuxino() { - pkgdesc="U-Boot with Extlinux support for A13 OLinuXino" - install=${pkgbase}.install - provides=('uboot-sunxi') - conflicts=('uboot-sunxi' 'uboot-a13-olinuxino' 'uboot-a13-olinuxino-linux-libre') - replaces=('uboot-a13-olinuxino' 'uboot-a13-olinuxino-linux-libre' 'uboot4grub-a13-olinuxino') - - install -d "${pkgdir}"/boot/extlinux - install -Dm644 bin_A13-OLinuXino/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot - - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux -} - -package_uboot4extlinux-a13-olinuxino-micro() { - pkgdesc="U-Boot with Extlinux support for A13 OLinuXino Micro" - install=${pkgbase}.install - provides=('uboot-sunxi') - conflicts=('uboot-sunxi' 'uboot-a13-olinuxino-micro' 'uboot-a13-olinuxino-micro-linux-libre') - replaces=('uboot-a13-olinuxino-micro' 'uboot-a13-olinuxino-micro-linux-libre' 'uboot4grub-a13-olinuxino-micro') - - install -d "${pkgdir}"/boot/extlinux - install -Dm644 bin_A13-OLinuXinoM/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot - - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux -} - -package_uboot4extlinux-a20-olinuxino-lime() { - pkgdesc="U-Boot with Extlinux support for A20 OLinuXino Lime" - install=${pkgbase}.install - provides=('uboot-sunxi') - conflicts=('uboot-sunxi' 'uboot-a20-olinuxino-lime' 'uboot-a20-olinuxino-lime-linux-libre') - replaces=('uboot-a20-olinuxino-lime' 'uboot-a20-olinuxino-lime-linux-libre' 'uboot4grub-a20-olinuxino-lime') - - install -d "${pkgdir}"/boot/extlinux - install -Dm644 bin_A20-OLinuXino-Lime/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot - - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux -} - -package_uboot4extlinux-a20-olinuxino-lime2() { - pkgdesc="U-Boot with Extlinux support for A20 OLinuXino Lime2" - install=${pkgbase}.install - provides=('uboot-sunxi') - conflicts=('uboot-sunxi' 'uboot-a20-olinuxino-lime2' 'uboot-a20-olinuxino-lime2-linux-libre') - replaces=('uboot-a20-olinuxino-lime2' 'uboot-a20-olinuxino-lime2-linux-libre' 'uboot4grub-a20-olinuxino-lime2') - - install -d "${pkgdir}"/boot/extlinux - install -Dm644 bin_A20-OLinuXino-Lime2/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot - - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux -} - -package_uboot4extlinux-a20-olinuxino-micro() { - pkgdesc="U-Boot with Extlinux support for A20 OLinuXino Micro" - install=${pkgbase}.install - provides=('uboot-sunxi') - conflicts=('uboot-sunxi' 'uboot-a20-olinuxino-micro' 'uboot-a20-olinuxino-micro-linux-libre') - replaces=('uboot-a20-olinuxino-micro' 'uboot-a20-olinuxino-micro-linux-libre' 'uboot4grub-a20-olinuxino-micro') - - install -d "${pkgdir}"/boot/extlinux - install -Dm644 bin_A20-OLinuXino_MICRO/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot - - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux -} - -package_uboot4extlinux-cubieboard() { - pkgdesc="U-Boot with Extlinux support for Cubieboard" - install=${pkgbase}.install - provides=('uboot-sunxi') - conflicts=('uboot-sunxi' 'uboot-cubieboard' 'uboot-cubieboard-linux-libre') - replaces=('uboot-cubieboard' 'uboot-cubieboard-linux-libre' 'uboot4grub-cubieboard') - - install -d "${pkgdir}"/boot/extlinux - install -Dm644 bin_Cubieboard/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot-sunxi-with-spl.bin - - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux -} - -package_uboot4extlinux-cubieboard2() { - pkgdesc="U-Boot with Extlinux support for Cubieboard 2" - install=${pkgbase}.install - provides=('uboot-sunxi') - conflicts=('uboot-sunxi' 'uboot-cubieboard2' 'uboot-cubieboard2-linux-libre') - replaces=('uboot-cubieboard2' 'uboot-cubieboard2-linux-libre' 'uboot4grub-cubieboard2') - - install -d "${pkgdir}"/boot/extlinux - install -Dm644 bin_Cubieboard2/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot-sunxi-with-spl.bin - - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux -} - -package_uboot4extlinux-cubietruck() { - pkgdesc="U-Boot with Extlinux support for Cubietruck" - install=${pkgbase}.install - provides=('uboot-sunxi') - conflicts=('uboot-sunxi' 'uboot-cubietruck' 'uboot-cubietruck-linux-libre') - replaces=('uboot-cubietruck' 'uboot-cubietruck-linux-libre' 'uboot4grub-cubietruck') - - install -d "${pkgdir}"/boot/extlinux - install -Dm644 bin_Cubietruck/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot/u-boot-sunxi-with-spl.bin - - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux -} - -package_uboot4extlinux-pcduino() { - pkgdesc="U-Boot with Extlinux support for pcDuino" - install=${pkgbase}.install - provides=('uboot-sunxi') - conflicts=('uboot-sunxi' 'uboot-pcduino' 'uboot-pcduino-linux-libre') - replaces=('uboot-pcduino' 'uboot-pcduino-linux-libre' 'uboot4grub-pcduino') - - install -d "${pkgdir}"/boot/extlinux - install -Dm644 bin_Linksprite_pcDuino/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot - - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux -} - -package_uboot4extlinux-pcduino3() { - pkgdesc="U-Boot with Extlinux support for pcDuino3" - install=${pkgbase}.install - provides=('uboot-sunxi') - conflicts=('uboot-sunxi' 'uboot-pcduino3' 'uboot-pcduino3-linux-libre') - replaces=('uboot-pcduino3' 'uboot-pcduino3-linux-libre' 'uboot4grub-pcduino3') - - install -d "${pkgdir}"/boot/extlinux - install -Dm644 bin_Linksprite_pcDuino3/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot - - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux -} - -package_uboot4extlinux-pcduino3-nano() { - pkgdesc="U-Boot with Extlinux support for pcDuino3 Nano" - install=${pkgbase}.install - provides=('uboot-sunxi') - conflicts=('uboot-sunxi' 'uboot-pcduino3-nano' 'uboot-pcduino3-nano-linux-libre') - replaces=('uboot-pcduino3-nano' 'uboot-pcduino3-nano-linux-libre' 'uboot4grub-pcduino3-nano') - - install -d "${pkgdir}"/boot/extlinux - install -Dm644 bin_Linksprite_pcDuino3_Nano/u-boot-sunxi-with-spl.bin "${pkgdir}"/boot - - install -Dm644 extlinux.conf "${pkgdir}"/boot/extlinux -} diff --git a/libre/uboot4extlinux-sunxi/extlinux.conf b/libre/uboot4extlinux-sunxi/extlinux.conf deleted file mode 100644 index 66f6b30d5..000000000 --- a/libre/uboot4extlinux-sunxi/extlinux.conf +++ /dev/null @@ -1,46 +0,0 @@ -menu title Welcome to U-Boot with Extlinux support! - -label Parabola GNU/Linux-libre, linux-libre kernel - kernel /boot/vmlinuz-linux-libre - append root=/dev/mmcblk0p1 rw console=ttyS0,115200 - fdtdir /boot/dtbs/linux-libre - -#label Parabola GNU/Linux-libre, linux-libre-lts kernel -# kernel /boot/vmlinuz-linux-libre-lts -# append root=/dev/mmcblk0p1 rw console=ttyS0,115200 -# fdtdir /boot/dtbs/linux-libre-lts - -#label Parabola GNU/Linux-libre, linux-libre-knock kernel -# kernel /boot/vmlinuz-linux-libre-knock -# append root=/dev/mmcblk0p1 rw console=ttyS0,115200 -# fdtdir /boot/dtbs/linux-libre-knock - -#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel -# kernel /boot/vmlinuz-linux-libre-lts-knock -# append root=/dev/mmcblk0p1 rw console=ttyS0,115200 -# fdtdir /boot/dtbs/linux-libre-lts-knock - -#label Parabola GNU/Linux-libre, linux-libre-grsec kernel -# kernel /boot/vmlinuz-linux-libre-grsec -# append root=/dev/mmcblk0p1 rw console=ttyS0,115200 -# fdtdir /boot/dtbs/linux-libre-grsec - -#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel -# kernel /boot/vmlinuz-linux-libre-grsec-knock -# append root=/dev/mmcblk0p1 rw console=ttyS0,115200 -# fdtdir /boot/dtbs/linux-libre-grsec-knock - -#label Parabola GNU/Linux-libre, linux-libre-audit kernel -# kernel /boot/vmlinuz-linux-libre-audit -# append root=/dev/mmcblk0p1 rw console=ttyS0,115200 -# fdtdir /boot/dtbs/linux-libre-audit - -#label Parabola GNU/Linux-libre, linux-libre-pck kernel -# kernel /boot/vmlinuz-linux-libre-pck -# append root=/dev/mmcblk0p1 rw console=ttyS0,115200 -# fdtdir /boot/dtbs/linux-libre-pck - -#label Parabola GNU/Linux-libre, linux-libre-rt kernel -# kernel /boot/vmlinuz-linux-libre-rt -# append root=/dev/mmcblk0p1 rw console=ttyS0,115200 -# fdtdir /boot/dtbs/linux-libre-rt diff --git a/libre/uboot4extlinux-sunxi/uboot4extlinux-sunxi.install b/libre/uboot4extlinux-sunxi/uboot4extlinux-sunxi.install deleted file mode 100644 index e39c2cd2e..000000000 --- a/libre/uboot4extlinux-sunxi/uboot4extlinux-sunxi.install +++ /dev/null @@ -1,27 +0,0 @@ -extlinux_warning() { - echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf" -} - -flash_uboot() { - echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0." - echo "Do you want to do this now? [y|N]" - read -r shouldwe - if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then - dd if=/boot/u-boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8 - else - echo "You can do this later by running:" - echo "# dd if=/boot/u-boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8" - fi - extlinux_warning -} - -## arg 1: the new package version -post_install() { - flash_uboot -} - -## arg 1: the new package version -## arg 2: the old package version -post_upgrade() { - flash_uboot -} diff --git a/libre/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch b/libre/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch deleted file mode 100644 index 7328d1ad7..000000000 --- a/libre/uboot4extlinux-udoo/0001-parabola-arm-modifications.patch +++ /dev/null @@ -1,389 +0,0 @@ -diff -Nur u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg ---- u-boot-2015.01.orig/board/udoo/1066mhz_4x256mx16_dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/1066mhz_4x256mx16_dl.cfg 2016-02-23 18:15:32.854611743 -0300 -@@ -0,0 +1,58 @@ -+/* -+ * Copyright (C) 2013 Seco USA Inc -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ */ -+ -+ -+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D -+DATA 4, MX6_MMDC_P0_MDOTC, 0x00333040 -+ -+DATA 4, MX6_MMDC_P0_MDCFG0, 0x3F4352F3 -+DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66D8B63 -+DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB -+ -+DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 -+DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 -+ -+ -+DATA 4, MX6_MMDC_P0_MDOR, 0x00431023 -+DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 -+DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000 -+ -+DATA 4, MX6_MMDC_P0_MDSCR, 0x02008032 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 -+ -+DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 -+DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003 -+ -+DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 -+ -+DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 -+DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 -+ -+DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x425C0251 -+DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021B021E -+DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x021B021E -+DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x01730200 -+ -+DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45474C45 -+DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x44464744 -+DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3336 -+DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x32383630 -+ -+DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x002F0038 -+DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F -+DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F001F -+DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F -+ -+DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000000 -+DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000000 -+ -+DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D -+DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 -+DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 -diff -Nur u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg u-boot-2015.01/board/udoo/ddr-setup_dl.cfg ---- u-boot-2015.01.orig/board/udoo/ddr-setup_dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/ddr-setup_dl.cfg 2016-02-23 18:15:32.854611743 -0300 -@@ -0,0 +1,84 @@ -+/* -+ * Copyright (C) 2013 Seco USA Inc -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ * -+ * Device Configuration Data (DCD) -+ * -+ * Each entry must have the format: -+ * Addr-type Address Value -+ * -+ * where: -+ * Addr-type register length (1,2 or 4 bytes) -+ * Address absolute address of the register -+ * value value to be stored in the register -+ */ -+ -+/* -+ * DDR3 settings -+ * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), -+ * memory bus width: 64 bits x16/x32/x64 -+ * MX6DL ddr is limited to 800 MHz(400 MHz clock) -+ * memory bus width: 64 bits x16/x32/x64 -+ * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) -+ * memory bus width: 32 bits x16/x32 -+ */ -+DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028 -+ -+DATA 4, MX6_IOM_GRP_B0DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B1DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B2DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B3DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B4DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B5DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B6DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_B7DS, 0x00000028 -+DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028 -+ -+DATA 4, MX6_IOM_GRP_CTLDS, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028 -+DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_CAS, 0x00000028 -+DATA 4, MX6_IOM_DRAM_RAS, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_RESET, 0x00000028 -+ -+DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028 -+DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028 -+ -+/* (differential input) */ -+DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 -+/* (differential input) */ -+DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 -+/* disable ddr pullups */ -+DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 -+DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 -+/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ -+DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 -+ -+/* Read data DQ Byte0-3 delay */ -+DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 -+DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 -+DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 -diff -Nur u-boot-2015.01.orig/board/udoo/udoo-dl.cfg u-boot-2015.01/board/udoo/udoo-dl.cfg ---- u-boot-2015.01.orig/board/udoo/udoo-dl.cfg 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/board/udoo/udoo-dl.cfg 2016-02-23 18:15:32.854611743 -0300 -@@ -0,0 +1,29 @@ -+/* -+ * Copyright (C) 2013 Boundary Devices -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ * -+ * Refer doc/README.imximage for more details about how-to configure -+ * and create imximage boot image -+ * -+ * The syntax is taken as close as possible with the kwbimage -+ */ -+ -+/* image version */ -+IMAGE_VERSION 2 -+ -+/* -+ * Boot Device : one of -+ * spi, sd (the board has no nand neither onenand) -+ */ -+BOOT_FROM sd -+ -+#define __ASSEMBLY__ -+#include -+#include "asm/arch/mx6-ddr.h" -+#include "asm/arch/iomux.h" -+#include "asm/arch/crm_regs.h" -+ -+#include "ddr-setup_dl.cfg" -+#include "1066mhz_4x256mx16_dl.cfg" -+#include "clocks.cfg" -diff -Nur u-boot-2015.01.orig/configs/udoo_dl_defconfig u-boot-2015.01/configs/udoo_dl_defconfig ---- u-boot-2015.01.orig/configs/udoo_dl_defconfig 1969-12-31 21:00:00.000000000 -0300 -+++ u-boot-2015.01/configs/udoo_dl_defconfig 2016-02-23 18:15:32.854611743 -0300 -@@ -0,0 +1,3 @@ -+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/udoo/udoo-dl.cfg,MX6DL,DDR_MB=1024" -+CONFIG_ARM=y -+CONFIG_TARGET_UDOO=y -diff -Nur u-boot-2015.01.orig/include/configs/udoo.h u-boot-2015.01/include/configs/udoo.h ---- u-boot-2015.01.orig/include/configs/udoo.h 2015-01-12 12:39:08.000000000 -0200 -+++ u-boot-2015.01/include/configs/udoo.h 2016-02-23 18:24:17.779054304 -0300 -@@ -78,7 +78,7 @@ - #define CONFIG_CMD_BMODE - #define CONFIG_CMD_SETEXPR - --#define CONFIG_BOOTDELAY 3 -+#define CONFIG_BOOTDELAY 1 - - #define CONFIG_SYS_MEMTEST_START 0x10000000 - #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) -@@ -96,60 +96,107 @@ - #define CONFIG_BOUNCE_BUFFER - #define CONFIG_CMD_EXT2 - #define CONFIG_CMD_FAT -+#define CONFIG_CMD_EXT4 -+#define CONFIG_CMD_FS_GENERIC - #define CONFIG_DOS_PARTITION - -+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre" -+ -+#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) -+#define CONFIG_DEFAULT_FDT_FILE "imx6dl-udoo.dtb" -+#elif defined(CONFIG_MX6Q) - #define CONFIG_DEFAULT_FDT_FILE "imx6q-udoo.dtb" -+#endif -+ -+/* Enable Extlinux boot support */ -+#define CONFIG_CMD_PXE -+#define CONFIG_MENU -+#define BOOT_TARGET_DEVICES(func) -+#include - - #define CONFIG_EXTRA_ENV_SETTINGS \ -- "script=boot.scr\0" \ -- "image=zImage\0" \ -- "console=ttymxc1\0" \ -+ BOOTENV \ -+ "bootfile=zImage\0" \ -+ "bootdir=/boot\0" \ -+ "console=ttymxc1,115200\0" \ - "splashpos=m,m\0" \ - "fdt_high=0xffffffff\0" \ -+ "rdaddr=0x12A00000\0" \ -+ "rdfile=initramfs-linux.img\0" \ - "initrd_high=0xffffffff\0" \ -- "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ -- "fdt_addr=0x18000000\0" \ -- "boot_fdt=try\0" \ -+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ -+ "fdtdir=/boot/dtbs\0" \ -+ "fdtaddr=0x18000000\0" \ - "ip_dyn=yes\0" \ -+ "optargs=\0" \ -+ "video=\0" \ -+ "devtype=mmc\0" \ -+ "devnum=0\0" \ - "mmcdev=0\0" \ -- "mmcpart=1\0" \ -- "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ -- "update_sd_firmware_filename=u-boot.imx\0" \ -- "update_sd_firmware=" \ -- "if test ${ip_dyn} = yes; then " \ -- "setenv get_cmd dhcp; " \ -+ "mmcroot=/dev/mmcblk0p1 rw rootwait\0" \ -+ "mmcargs=setenv bootargs console=${console} " \ -+ "${optargs} " \ -+ "root=${mmcroot} " \ -+ "video=${video}\0" \ -+ "videoargs=" \ -+ "setenv nextcon 0; " \ -+ "if hdmidet; then " \ -+ "setenv bootargs ${bootargs} " \ -+ "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \ -+ "if=RGB24; " \ -+ "setenv fbmem fbmem=28M; " \ -+ "setexpr nextcon ${nextcon} + 1; " \ - "else " \ -- "setenv get_cmd tftp; " \ -+ "echo - no HDMI monitor;" \ - "fi; " \ -- "if mmc dev ${mmcdev}; then " \ -- "if ${get_cmd} ${update_sd_firmware_filename}; then " \ -- "setexpr fw_sz ${filesize} / 0x200; " \ -- "setexpr fw_sz ${fw_sz} + 1; " \ -- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ -- "fi; " \ -- "fi\0" \ -- "mmcargs=setenv bootargs console=${console},${baudrate} " \ -- "root=${mmcroot}\0" \ -- "loadbootscript=" \ -- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ -- "bootscript=echo Running bootscript from mmc ...; " \ -- "source\0" \ -- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ -- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ -- "mmcboot=echo Booting from mmc ...; " \ -- "run mmcargs; " \ -- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -- "if run loadfdt; then " \ -- "bootz ${loadaddr} - ${fdt_addr}; " \ -+ "i2c dev 1; " \ -+ "if i2c probe 0x10; then " \ -+ "setenv bootargs ${bootargs} " \ -+ "video=mxcfb${nextcon}:dev=lcd,800x480@60," \ -+ "if=RGB666; " \ -+ "if test 0 -eq ${nextcon}; then " \ -+ "setenv fbmem fbmem=10M; " \ - "else " \ -- "if test ${boot_fdt} = try; then " \ -- "bootz; " \ -- "else " \ -- "echo WARN: Cannot load the DT; " \ -- "fi; " \ -+ "setenv fbmem ${fbmem},10M; " \ - "fi; " \ -+ "setexpr nextcon ${nextcon} + 1; " \ - "else " \ -- "bootz; " \ -+ "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \ -+ "fi; " \ -+ "setenv bootargs ${bootargs} ${fbmem}\0" \ -+ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ -+ "loadrd=load mmc ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ -+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load mmc ${bootpart} ${fdtaddr} ${fdtdir}/${fdtfile}\0" \ -+ "mmcboot=mmc dev ${mmcdev}; " \ -+ "if mmc rescan; then " \ -+ "echo SD/MMC found on device ${mmcdev};" \ -+ "setenv bootpart ${mmcdev}:1; " \ -+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \ -+ "if test -e mmc ${bootpart} ${bootdir}/uEnv.txt; then " \ -+ "load mmc ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \ -+ "echo Checking if uenvcmd is set ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "fi; " \ -+ "run scan_dev_for_boot;" \ -+ "if run loadimage; then " \ -+ "if run loadfdt; then " \ -+ "run mmcargs;" \ -+ "if run loadrd; then " \ -+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdtaddr};" \ -+ "else " \ -+ "bootz ${loadaddr} - ${fdtaddr};" \ -+ "fi;" \ -+ "else " \ -+ "echo Kernel found, but no device tree found;" \ -+ "fi;" \ -+ "else " \ -+ "echo No kernel found;" \ -+ "fi;" \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ -@@ -161,10 +208,10 @@ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ -- "${get_cmd} ${image}; " \ -+ "${get_cmd} ${bootfile}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ -- "bootz ${loadaddr} - ${fdt_addr}; " \ -+ "if ${get_cmd} ${fdtaddr} ${fdtfile}; then " \ -+ "bootz ${loadaddr} - ${fdtaddr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ -@@ -177,16 +224,7 @@ - "fi;\0" - - #define CONFIG_BOOTCOMMAND \ -- "mmc dev ${mmcdev}; if mmc rescan; then " \ -- "if run loadbootscript; then " \ -- "run bootscript; " \ -- "else " \ -- "if run loadimage; then " \ -- "run mmcboot; " \ -- "else run netboot; " \ -- "fi; " \ -- "fi; " \ -- "else run netboot; fi" -+ "run mmcboot;" - - /* Miscellaneous configurable options */ - #define CONFIG_SYS_LONGHELP -@@ -227,6 +265,7 @@ - - #define CONFIG_OF_LIBFDT - #define CONFIG_CMD_BOOTZ -+#define CONFIG_SUPPORT_RAW_INITRD - - #ifndef CONFIG_SYS_DCACHE_OFF - #define CONFIG_CMD_CACHE diff --git a/libre/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-5.patch b/libre/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-5.patch deleted file mode 100644 index 30718c561..000000000 --- a/libre/uboot4extlinux-udoo/0002-kernel-add-support-for-gcc-5.patch +++ /dev/null @@ -1,97 +0,0 @@ -From 5b07fc2c680ad4279a45d863108544020b4d74cd Mon Sep 17 00:00:00 2001 -From: Sasha Levin -Date: Mon, 13 Oct 2014 15:51:05 -0700 -Subject: [PATCH 2/6] kernel: add support for gcc 5 - -We're missing include/linux/compiler-gcc5.h which is required now -because gcc branched off to v5 in trunk. - -Just copy the relevant bits out of include/linux/compiler-gcc4.h, -no new code is added as of now. - -This fixes a build error when using gcc 5. - -Signed-off-by: Sasha Levin -Cc: -Signed-off-by: Andrew Morton -Signed-off-by: Linus Torvalds ---- - include/linux/compiler-gcc5.h | 66 +++++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 66 insertions(+) - create mode 100644 include/linux/compiler-gcc5.h - -diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h -new file mode 100644 -index 0000000..cdd1cc2 ---- /dev/null -+++ b/include/linux/compiler-gcc5.h -@@ -0,0 +1,66 @@ -+#ifndef __LINUX_COMPILER_H -+#error "Please don't include directly, include instead." -+#endif -+ -+#define __used __attribute__((__used__)) -+#define __must_check __attribute__((warn_unused_result)) -+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b) -+ -+/* Mark functions as cold. gcc will assume any path leading to a call -+ to them will be unlikely. This means a lot of manual unlikely()s -+ are unnecessary now for any paths leading to the usual suspects -+ like BUG(), printk(), panic() etc. [but let's keep them for now for -+ older compilers] -+ -+ Early snapshots of gcc 4.3 don't support this and we can't detect this -+ in the preprocessor, but we can live with this because they're unreleased. -+ Maketime probing would be overkill here. -+ -+ gcc also has a __attribute__((__hot__)) to move hot functions into -+ a special section, but I don't see any sense in this right now in -+ the kernel context */ -+#define __cold __attribute__((__cold__)) -+ -+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) -+ -+#ifndef __CHECKER__ -+# define __compiletime_warning(message) __attribute__((warning(message))) -+# define __compiletime_error(message) __attribute__((error(message))) -+#endif /* __CHECKER__ */ -+ -+/* -+ * Mark a position in code as unreachable. This can be used to -+ * suppress control flow warnings after asm blocks that transfer -+ * control elsewhere. -+ * -+ * Early snapshots of gcc 4.5 don't support this and we can't detect -+ * this in the preprocessor, but we can live with this because they're -+ * unreleased. Really, we need to have autoconf for the kernel. -+ */ -+#define unreachable() __builtin_unreachable() -+ -+/* Mark a function definition as prohibited from being cloned. */ -+#define __noclone __attribute__((__noclone__)) -+ -+/* -+ * Tell the optimizer that something else uses this function or variable. -+ */ -+#define __visible __attribute__((externally_visible)) -+ -+/* -+ * GCC 'asm goto' miscompiles certain code sequences: -+ * -+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 -+ * -+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. -+ * Fixed in GCC 4.8.2 and later versions. -+ * -+ * (asm goto is automatically volatile - the naming reflects this.) -+ */ -+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) -+ -+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP -+#define __HAVE_BUILTIN_BSWAP32__ -+#define __HAVE_BUILTIN_BSWAP64__ -+#define __HAVE_BUILTIN_BSWAP16__ -+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ --- -2.4.4 - diff --git a/libre/uboot4extlinux-udoo/PKGBUILD b/libre/uboot4extlinux-udoo/PKGBUILD deleted file mode 100644 index 41f6960a4..000000000 --- a/libre/uboot4extlinux-udoo/PKGBUILD +++ /dev/null @@ -1,69 +0,0 @@ -# U-Boot: UDOO -# Maintainer: André Silva - -buildarch=4 - -pkgbase=uboot4extlinux-udoo -pkgname=('uboot4extlinux-udoo_dl' 'uboot4extlinux-udoo_quad') -pkgver=2015.01 -pkgrel=1 -arch=('armv7h') -url="http://git.denx.de/u-boot.git/" -license=('GPL') -makedepends=('bc') -backup=(boot/extlinux/extlinux.conf) -source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2" - '0001-parabola-arm-modifications.patch' - '0002-kernel-add-support-for-gcc-5.patch' - 'extlinux.conf') -md5sums=('7f08dc9e98a71652bd6968888ed6ec95' - 'f90125a266a2cd80980464f949d03d88' - '721a46867e189d8dedc6b6f86a536a34' - 'e05d2d41a1bdbbd5d6fec02534784dcd') - -prepare() { - cd u-boot-${pkgver} - - patch -Np1 -i ../0001-parabola-arm-modifications.patch - patch -Np1 -i ../0002-kernel-add-support-for-gcc-5.patch -} - -build() { - cd u-boot-${pkgver} - - unset CFLAGS CXXFLAGS LDFLAGS - - mkdir bins - for i in dl quad; do - make distclean - make udoo_${i}_config - make - mv u-boot.imx bins/u-boot-${i}.imx - done -} - -package_uboot4extlinux-udoo_dl() { - pkgdesc="U-Boot with Extlinux support for UDOO Dual" - replaces=('uboot-udoo-dual-linux-libre' 'uboot-udoo-dual-linux-libre-grsec' - 'uboot-udoo-dual' 'uboot-udoo_dl') - conflicts=('uboot-udoo-dual-linux-libre' 'uboot-udoo-dual-linux-libre-grsec' - 'uboot-udoo-dual' 'uboot-udoo_dl' 'uboot4extlinux-udoo_quad' 'uboot4grub-udoo_dl' 'uboot4grub-udoo_quad') - install=${pkgbase}.install - - mkdir -p "${pkgdir}"/boot/extlinux - cp u-boot-${pkgver}/bins/u-boot-dl.imx "${pkgdir}"/boot/u-boot.imx - cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux -} - -package_uboot4extlinux-udoo_quad() { - pkgdesc="U-Boot with Extlinux support for UDOO Quad" - replaces=('uboot-udoo-quad-linux-libre' 'uboot-udoo-quad-linux-libre-grsec' - 'uboot-udoo-quad' 'uboot-udoo_quad') - conflicts=('uboot-udoo-quad-linux-libre' 'uboot-udoo-quad-linux-libre-grsec' - 'uboot-udoo-quad' 'uboot-udoo_quad' 'uboot4extlinux-udoo_dl' 'uboot4grub-udoo_dl' 'uboot4grub-udoo_quad') - install=${pkgbase}.install - - mkdir -p "${pkgdir}"/boot/extlinux - cp u-boot-${pkgver}/bins/u-boot-quad.imx "${pkgdir}"/boot/u-boot.imx - cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux -} diff --git a/libre/uboot4extlinux-udoo/extlinux.conf b/libre/uboot4extlinux-udoo/extlinux.conf deleted file mode 100644 index 45d603094..000000000 --- a/libre/uboot4extlinux-udoo/extlinux.conf +++ /dev/null @@ -1,46 +0,0 @@ -menu title Welcome to U-Boot with Extlinux support! - -label Parabola GNU/Linux-libre, linux-libre kernel - kernel /boot/vmlinuz-linux-libre - append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 - fdtdir /boot/dtbs/linux-libre - -#label Parabola GNU/Linux-libre, linux-libre-lts kernel -# kernel /boot/vmlinuz-linux-libre-lts -# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 -# fdtdir /boot/dtbs/linux-libre-lts - -#label Parabola GNU/Linux-libre, linux-libre-knock kernel -# kernel /boot/vmlinuz-linux-libre-knock -# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 -# fdtdir /boot/dtbs/linux-libre-knock - -#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel -# kernel /boot/vmlinuz-linux-libre-lts-knock -# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 -# fdtdir /boot/dtbs/linux-libre-lts-knock - -#label Parabola GNU/Linux-libre, linux-libre-grsec kernel -# kernel /boot/vmlinuz-linux-libre-grsec -# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 -# fdtdir /boot/dtbs/linux-libre-grsec - -#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel -# kernel /boot/vmlinuz-linux-libre-grsec-knock -# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 -# fdtdir /boot/dtbs/linux-libre-grsec-knock - -#label Parabola GNU/Linux-libre, linux-libre-audit kernel -# kernel /boot/vmlinuz-linux-libre-audit -# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 -# fdtdir /boot/dtbs/linux-libre-audit - -#label Parabola GNU/Linux-libre, linux-libre-pck kernel -# kernel /boot/vmlinuz-linux-libre-pck -# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 -# fdtdir /boot/dtbs/linux-libre-pck - -#label Parabola GNU/Linux-libre, linux-libre-rt kernel -# kernel /boot/vmlinuz-linux-libre-rt -# append root=/dev/mmcblk0p1 rw console=ttymxc1,115200 -# fdtdir /boot/dtbs/linux-libre-rt diff --git a/libre/uboot4extlinux-udoo/uboot4extlinux-udoo.install b/libre/uboot4extlinux-udoo/uboot4extlinux-udoo.install deleted file mode 100644 index 8a45c3b16..000000000 --- a/libre/uboot4extlinux-udoo/uboot4extlinux-udoo.install +++ /dev/null @@ -1,28 +0,0 @@ -extlinux_warning() { - echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf" -} - -flash_uboot() { - echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0." - echo "Do you want to do this now? [y|N]" - read -r shouldwe - if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then - dd if=/boot/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2 - sync - else - echo "You can do this later by running:" - echo "# dd if=/boot/u-boot.imx of=/dev/mmcblk0 bs=512 seek=2" - fi - extlinux_warning -} - -## arg 1: the new package version -post_install() { - flash_uboot -} - -## arg 1: the new package version -## arg 2: the old package version -post_upgrade() { - flash_uboot -} diff --git a/libre/uboot4extlinux-wandboard/0001-parabola-arm-modifications.patch b/libre/uboot4extlinux-wandboard/0001-parabola-arm-modifications.patch deleted file mode 100644 index c50ca9e00..000000000 --- a/libre/uboot4extlinux-wandboard/0001-parabola-arm-modifications.patch +++ /dev/null @@ -1,153 +0,0 @@ -diff -Nur u-boot-2015.10.orig/include/configs/mx6_common.h u-boot-2015.10/include/configs/mx6_common.h ---- u-boot-2015.10.orig/include/configs/mx6_common.h 2015-10-19 20:59:38.000000000 -0300 -+++ u-boot-2015.10/include/configs/mx6_common.h 2016-02-26 20:52:16.196805960 -0300 -@@ -68,7 +68,7 @@ - #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - - #ifndef CONFIG_BOOTDELAY --#define CONFIG_BOOTDELAY 3 -+#define CONFIG_BOOTDELAY 1 - #endif - - /* allow to overwrite serial and ethaddr */ -@@ -82,6 +82,8 @@ - #define CONFIG_SUPPORT_RAW_INITRD - #define CONFIG_CMD_FS_GENERIC - #define CONFIG_DOS_PARTITION -+#define CONFIG_CMD_PART -+#define CONFIG_PARTITION_UUIDS - #define CONFIG_CMD_EXT2 - #define CONFIG_CMD_EXT4 - #define CONFIG_CMD_EXT4_WRITE -diff -Nur u-boot-2015.10.orig/include/configs/wandboard.h u-boot-2015.10/include/configs/wandboard.h ---- u-boot-2015.10.orig/include/configs/wandboard.h 2015-10-19 20:59:38.000000000 -0300 -+++ u-boot-2015.10/include/configs/wandboard.h 2016-02-26 20:55:20.041265918 -0300 -@@ -86,19 +86,33 @@ - #define CONFIG_IMX_HDMI - #define CONFIG_IMX_VIDEO_SKIP - -+#define CONFIG_IDENT_STRING " Parabola GNU/Linux-libre" -+ -+/* Enable Extlinux boot support */ -+#define CONFIG_CMD_PXE -+#define CONFIG_MENU -+#define BOOT_TARGET_DEVICES(func) -+#include -+ - #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - #define CONFIG_EXTRA_ENV_SETTINGS \ -+ BOOTENV \ - "script=boot.scr\0" \ - "image=zImage\0" \ -+ "bootdir=/boot\0" \ - "console=ttymxc0\0" \ - "splashpos=m,m\0" \ - "fdtfile=undefined\0" \ -+ "fdtdir=/boot/dtbs\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "fdt_addr=0x18000000\0" \ -+ "rdaddr=0x12A00000\0" \ -+ "rdfile=initramfs-linux.img\0" \ - "boot_fdt=try\0" \ -+ "optargs=\0" \ - "ip_dyn=yes\0" \ -- "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ -+ "mmcdev=0\0" \ - "mmcpart=1\0" \ - "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ - "update_sd_firmware_filename=u-boot.imx\0" \ -@@ -116,7 +130,9 @@ - "fi; " \ - "fi\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ -- "root=${mmcroot}; run videoargs\0" \ -+ "${optargs} " \ -+ "root=${root} " \ -+ "video=${video}\0" \ - "videoargs=" \ - "setenv nextcon 0; " \ - "if hdmidet; then " \ -@@ -143,27 +159,44 @@ - "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \ - "fi; " \ - "setenv bootargs ${bootargs} ${fbmem}\0" \ -- "loadbootscript=" \ -- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ -- "bootscript=echo Running bootscript from mmc ...; " \ -- "source\0" \ -- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ -- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \ -- "mmcboot=echo Booting from mmc ...; " \ -- "run mmcargs; " \ -- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ -- "if run loadfdt; then " \ -- "bootz ${loadaddr} - ${fdt_addr}; " \ -- "else " \ -- "if test ${boot_fdt} = try; then " \ -- "bootz; " \ -+ "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${image}\0" \ -+ "loadrd=load ${devtype} ${bootpart} ${rdaddr} ${bootdir}/${rdfile}\0" \ -+ "loadfdt=echo loading ${fdtdir}/${fdtfile} ...; load ${devtype} ${bootpart} ${fdt_addr} ${fdtdir}/${fdtfile}\0" \ -+ "mmcboot=usb start;" \ -+ "for devtype in mmc usb; do " \ -+ "setenv devnum 0;" \ -+ "while ${devtype} dev ${devnum}; do " \ -+ "echo ${devtype} found on device ${devnum};" \ -+ "setenv bootpart ${devnum}:1;" \ -+ "part uuid ${devtype} ${bootpart} uuid;" \ -+ "setenv root PARTUUID=${uuid} rw rootwait;" \ -+ "echo Checking for: ${bootdir}/uEnv.txt ...;" \ -+ "if test -e ${devtype} ${bootpart} ${bootdir}/uEnv.txt; then " \ -+ "load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/uEnv.txt;" \ -+ "env import -t ${loadaddr} ${filesize};" \ -+ "echo Loaded environment from ${bootdir}/uEnv.txt;" \ -+ "echo Checking if uenvcmd is set ...;" \ -+ "if test -n ${uenvcmd}; then " \ -+ "echo Running uenvcmd ...;" \ -+ "run uenvcmd;" \ -+ "fi;" \ -+ "fi;" \ -+ "run scan_dev_for_boot;" \ -+ "if run loadimage; then " \ -+ "run mmcargs;" \ -+ "if run loadfdt; then " \ -+ "if run loadrd; then " \ -+ "bootz ${loadaddr} ${rdaddr}:${filesize} ${fdt_addr};" \ -+ "else " \ -+ "bootz ${loadaddr} - ${fdt_addr};" \ -+ "fi;" \ -+ "fi;" \ - "else " \ -- "echo WARN: Cannot load the DT; " \ -- "fi; " \ -- "fi; " \ -- "else " \ -- "bootz; " \ -- "fi;\0" \ -+ "echo No kernel found;" \ -+ "fi;" \ -+ "setexpr devnum ${devnum} + 1;" \ -+ "done;" \ -+ "done;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ -@@ -202,16 +235,7 @@ - - #define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ -- "mmc dev ${mmcdev}; if mmc rescan; then " \ -- "if run loadbootscript; then " \ -- "run bootscript; " \ -- "else " \ -- "if run loadimage; then " \ -- "run mmcboot; " \ -- "else run netboot; " \ -- "fi; " \ -- "fi; " \ -- "else run netboot; fi" -+ "run mmcboot;" - - /* Physical Memory Map */ - #define CONFIG_NR_DRAM_BANKS 1 diff --git a/libre/uboot4extlinux-wandboard/PKGBUILD b/libre/uboot4extlinux-wandboard/PKGBUILD deleted file mode 100644 index b97e0b1df..000000000 --- a/libre/uboot4extlinux-wandboard/PKGBUILD +++ /dev/null @@ -1,46 +0,0 @@ -# U-Boot: Wandboard -# Maintainer: André Silva - -buildarch=4 - -pkgname=uboot4extlinux-wandboard -pkgver=2015.10 -pkgrel=1 -pkgdesc="U-Boot with Extlinux support for Wandboard" -arch=('armv7h') -url="http://git.denx.de/u-boot.git/" -license=('GPL') -makedepends=('bc') -replaces=('uboot-wandboard-solo' 'uboot-wandboard-dual' 'uboot-wandboard-quad' 'uboot-wandboard' 'uboot-wandboard-linux-libre') -conflicts=('uboot-wandboard' 'uboot-wandboard-linux-libre' 'uboot4grub-wandboard') -install=${pkgname}.install -source=("ftp://ftp.denx.de/pub/u-boot/u-boot-${pkgver}.tar.bz2" - '0001-parabola-arm-modifications.patch' - 'extlinux.conf') -md5sums=('7c203b0fc3390a122d8e8b75f147eac5' - 'b456e16c44508868ce6d265da625d768' - '3367c0142a98a62fed243be74f5c465d') - -prepare() { - cd u-boot-${pkgver} - patch -Np1 -i ../0001-parabola-arm-modifications.patch -} - -build() { - cd u-boot-${pkgver} - - unset LDFLAGS - - make distclean - make wandboard_defconfig - make -} - -package() { - cd u-boot-${pkgver} - mkdir -p "${pkgdir}"/boot/extlinux - - mkdir -p "${pkgdir}"/boot - cp SPL u-boot.img "${pkgdir}"/boot - cp "${srcdir}"/extlinux.conf "${pkgdir}"/boot/extlinux -} diff --git a/libre/uboot4extlinux-wandboard/extlinux.conf b/libre/uboot4extlinux-wandboard/extlinux.conf deleted file mode 100644 index 16cc3a38f..000000000 --- a/libre/uboot4extlinux-wandboard/extlinux.conf +++ /dev/null @@ -1,46 +0,0 @@ -menu title Welcome to U-Boot with Extlinux support! - -label Parabola GNU/Linux-libre, linux-libre kernel - kernel /boot/vmlinuz-linux-libre - append root=/dev/mmcblk0p2 rw console=ttymxc0 - fdtdir /boot/dtbs/linux-libre - -#label Parabola GNU/Linux-libre, linux-libre-lts kernel -# kernel /boot/vmlinuz-linux-libre-lts -# append root=/dev/mmcblk0p2 rw console=ttymxc0 -# fdtdir /boot/dtbs/linux-libre-lts - -#label Parabola GNU/Linux-libre, linux-libre-knock kernel -# kernel /boot/vmlinuz-linux-libre-knock -# append root=/dev/mmcblk0p2 rw console=ttymxc0 -# fdtdir /boot/dtbs/linux-libre-knock - -#label Parabola GNU/Linux-libre, linux-libre-lts-knock kernel -# kernel /boot/vmlinuz-linux-libre-lts-knock -# append root=/dev/mmcblk0p2 rw console=ttymxc0 -# fdtdir /boot/dtbs/linux-libre-lts-knock - -#label Parabola GNU/Linux-libre, linux-libre-grsec kernel -# kernel /boot/vmlinuz-linux-libre-grsec -# append root=/dev/mmcblk0p2 rw console=ttymxc0 -# fdtdir /boot/dtbs/linux-libre-grsec - -#label Parabola GNU/Linux-libre, linux-libre-grsec-knock kernel -# kernel /boot/vmlinuz-linux-libre-grsec-knock -# append root=/dev/mmcblk0p2 rw console=ttymxc0 -# fdtdir /boot/dtbs/linux-libre-grsec-knock - -#label Parabola GNU/Linux-libre, linux-libre-audit kernel -# kernel /boot/vmlinuz-linux-libre-audit -# append root=/dev/mmcblk0p2 rw console=ttymxc0 -# fdtdir /boot/dtbs/linux-libre-audit - -#label Parabola GNU/Linux-libre, linux-libre-pck kernel -# kernel /boot/vmlinuz-linux-libre-pck -# append root=/dev/mmcblk0p2 rw console=ttymxc0 -# fdtdir /boot/dtbs/linux-libre-pck - -#label Parabola GNU/Linux-libre, linux-libre-rt kernel -# kernel /boot/vmlinuz-linux-libre-rt -# append root=/dev/mmcblk0p2 rw console=ttymxc0 -# fdtdir /boot/dtbs/linux-libre-rt diff --git a/libre/uboot4extlinux-wandboard/uboot4extlinux-wandboard.install b/libre/uboot4extlinux-wandboard/uboot4extlinux-wandboard.install deleted file mode 100644 index ddfb5c83f..000000000 --- a/libre/uboot4extlinux-wandboard/uboot4extlinux-wandboard.install +++ /dev/null @@ -1,29 +0,0 @@ -extlinux_warning() { - echo "==> WARNING: U-Boot uses Extlinux support to boot up. For setting it up, edit /boot/extlinux/extlinux.conf" -} - -flash_uboot() { - echo "A new U-Boot version needs to be flashed onto /dev/mmcblk0." - echo "Do this now? [y|N]" - read -r shouldwe - if [[ $shouldwe =~ ^([yY][eE][sS]|[yY])$ ]]; then - dd if=/boot/SPL of=/dev/mmcblk0 seek=1 bs=1k - dd if=/boot/u-boot.img of=/dev/mmcblk0 seek=69 bs=1k - else - echo "You can do this later by running:" - echo "# dd if=/boot/SPL of=/dev/mmcblk0 seek=1 bs=1k" - echo "# dd if=/boot/u-boot.img of=/dev/mmcblk0 seek=69 bs=1k" - fi - extlinux_warning -} - -## arg 1: the new package version -post_install() { - flash_uboot -} - -## arg 1: the new package version -## arg 2: the old package version -post_upgrade() { - flash_uboot -} -- cgit v1.2.3-54-g00ecf