Linux-libre 4.3.2-gnu

11 files changed, 132 insertions, 35 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
index b4d0b99af..d72ca1736 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
@@ -112,7 +112,7 @@ KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Mask to apply to all the context ID comparator.
 
-What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/ctxid_val
+What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/ctxid_pid
 Date:		November 2014
 KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
index 2fe2e3dae..2355ed8ae 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
@@ -249,7 +249,7 @@ KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(RW) Select which context ID comparator to work with.
 
-What:		/sys/bus/coresight/devices/<memory_map>.etm/ctxid_val
+What:		/sys/bus/coresight/devices/<memory_map>.etm/ctxid_pid
 Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 70c9b1ac6..42d360fe6 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -413,6 +413,11 @@ Description:
 		to compute the calories burnt by the user.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
+What:		/sys/.../iio:deviceX/in_anglvel_scale_available
+What:		/sys/.../iio:deviceX/in_magn_scale_available
+What:		/sys/.../iio:deviceX/in_illuminance_scale_available
+What:		/sys/.../iio:deviceX/in_intensity_scale_available
+What:		/sys/.../iio:deviceX/in_proximity_scale_available
 What:		/sys/.../iio:deviceX/in_voltageX_scale_available
 What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available
 What:		/sys/.../iio:deviceX/out_voltageX_scale_available
@@ -488,7 +493,7 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		Specifies the output powerdown mode.
 		DAC output stage is disconnected from the amplifier and
-		1kohm_to_gnd: connected	to ground via an 1kOhm resistor,
+		1kohm_to_gnd: connected to ground via an 1kOhm resistor,
 		6kohm_to_gnd: connected to ground via a 6kOhm resistor,
 		20kohm_to_gnd: connected to ground via a 20kOhm resistor,
 		100kohm_to_gnd: connected to ground via an 100kOhm resistor,
@@ -498,9 +503,9 @@ Description:
 		outX_powerdown_mode_available. If Y is not present the
 		mode is shared across all outputs.
 
-What:		/sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_voltageY_powerdown_mode_available
 What:		/sys/.../iio:deviceX/out_voltage_powerdown_mode_available
-What:		/sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What:		/sys/.../iio:deviceX/out_altvoltageY_powerdown_mode_available
 What:		/sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
@@ -1035,13 +1040,6 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		Number of scans contained by the buffer.
 
-What:		/sys/bus/iio/devices/iio:deviceX/buffer/bytes_per_datum
-KernelVersion:	2.6.37
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Bytes per scan.  Due to alignment fun, the scan may be larger
-		than implied directly by the scan_element parameters.
-
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/enable
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs b/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs
index 5235e6c74..bbb039237 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs
+++ b/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs
@@ -9,3 +9,12 @@ Description:
 		automated testing or in situations, where other trigger methods
 		are not applicable. For example no RTC or spare GPIOs.
 		X is the IIO index of the trigger.
+
+What:		/sys/bus/iio/devices/triggerX/name
+KernelVersion:	2.6.39
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The name attribute holds a description string for the current
+		trigger. In order to associate the trigger with an IIO device
+		one should write this name string to
+		/sys/bus/iio/devices/iio:deviceY/trigger/current_trigger.
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index e5cc7633d..864637f25 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -114,6 +114,20 @@ Description:
 		enabled for the device. Developer can write y/Y/1 or n/N/0 to
 		the file to enable/disable the feature.
 
+What:		/sys/bus/usb/devices/.../power/usb3_hardware_lpm
+Date:		June 2015
+Contact:	Kevin Strasser <kevin.strasser@linux.intel.com>
+Description:
+		If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged
+		in to a xHCI host which supports link PM, it will check if U1
+		and U2 exit latencies have been set in the BOS descriptor; if
+		the check is is passed and the host supports USB3 hardware LPM,
+		USB3 hardware LPM will be enabled for the device and the USB
+		device directory will contain a file named
+		power/usb3_hardware_lpm. The file holds a string value (enable
+		or disable) indicating whether or not USB3 hardware LPM is
+		enabled for the device.
+
 What:		/sys/bus/usb/devices/.../removable
 Date:		February 2012
 Contact:	Matthew Garrett <mjg@redhat.com>
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index acfe9df83..b07e86d45 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -223,3 +223,13 @@ Description:    write only
                 Writing 1 will issue a PERST to card which may cause the card
                 to reload the FPGA depending on load_image_on_perst.
 Users:		https://github.com/ibm-capi/libcxl
+
+What:		/sys/class/cxl/<card>/perst_reloads_same_image
+Date:		July 2015
+Contact:	linuxppc-dev@lists.ozlabs.org
+Description:	read/write
+		Trust that when an image is reloaded via PERST, it will not
+		have changed.
+		0 = don't trust, the image may be different (default)
+		1 = trust that the image will not change.
+Users:		https://github.com/ibm-capi/libcxl
diff --git a/Documentation/ABI/testing/sysfs-class-power-twl4030 b/Documentation/ABI/testing/sysfs-class-power-twl4030
new file mode 100644
index 000000000..be26af0f1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-power-twl4030
@@ -0,0 +1,45 @@
+What: /sys/class/power_supply/twl4030_ac/max_current
+      /sys/class/power_supply/twl4030_usb/max_current
+Description:
+	Read/Write limit on current which may
+	be drawn from the ac (Accessory Charger) or
+	USB port.
+
+	Value is in micro-Amps.
+
+	Value is set automatically to an appropriate
+	value when a cable is plugged or unplugged.
+
+	Value can the set by writing to the attribute.
+	The change will only persist until the next
+	plug event.  These event are reported via udev.
+
+
+What: /sys/class/power_supply/twl4030_usb/mode
+Description:
+	Changing mode for USB port.
+	Writing to this can disable charging.
+
+	Possible values are:
+		"auto" - draw power as appropriate for detected
+			 power source and battery status.
+		"off"  - do not draw any power.
+		"continuous"
+		       - activate mode described as "linear" in
+		         TWL data sheets.  This uses whatever
+			 current is available and doesn't switch off
+			 when voltage drops.
+
+			 This is useful for unstable power sources
+			 such as bicycle dynamo, but care should
+			 be taken that battery is not over-charged.
+
+What: /sys/class/power_supply/twl4030_ac/mode
+Description:
+	Changing mode for 'ac' port.
+	Writing to this can disable charging.
+
+	Possible values are:
+		"auto" - draw power as appropriate for detected
+			 power source and battery status.
+		"off"  - do not draw any power.
diff --git a/Documentation/ABI/testing/sysfs-driver-sunxi-sid b/Documentation/ABI/testing/sysfs-driver-sunxi-sid
deleted file mode 100644
index ffb9536f6..000000000
--- a/Documentation/ABI/testing/sysfs-driver-sunxi-sid
+++ /dev/null
@@ -1,22 +0,0 @@
-What:		/sys/devices/*/<our-device>/eeprom
-Date:		August 2013
-Contact:	Oliver Schinagl <oliver@schinagl.nl>
-Description:	read-only access to the SID (Security-ID) on current
-		A-series SoC's from Allwinner. Currently supports A10, A10s, A13
-		and A20 CPU's. The earlier A1x series of SoCs exports 16 bytes,
-		whereas the newer A20 SoC exposes 512 bytes split into sections.
-		Besides the 16 bytes of SID, there's also an SJTAG area,
-		HDMI-HDCP key and some custom keys. Below a quick overview, for
-		details see the user manual:
-		0x000  128 bit root-key (sun[457]i)
-		0x010  128 bit boot-key (sun7i)
-		0x020   64 bit security-jtag-key (sun7i)
-		0x028   16 bit key configuration (sun7i)
-		0x02b   16 bit custom-vendor-key (sun7i)
-		0x02c  320 bit low general key (sun7i)
-		0x040   32 bit read-control access (sun7i)
-		0x064  224 bit low general key (sun7i)
-		0x080 2304 bit HDCP-key (sun7i)
-		0x1a0  768 bit high general key (sun7i)
-Users:		any user space application which wants to read the SID on
-		Allwinner's A-series of CPU's.
diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom
index c4f0fed64..dca429340 100644
--- a/Documentation/ABI/testing/sysfs-driver-wacom
+++ b/Documentation/ABI/testing/sysfs-driver-wacom
@@ -77,3 +77,22 @@ Description:
 		The format is also scrambled, like in the USB mode, and it can
 		be summarized by converting 76543210 into GECA6420.
 					    HGFEDCBA      HFDB7531
+
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/unpair_remote
+Date:		July 2015
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing the character sequence '*' followed by a newline to
+		this file will delete all of the current pairings on the
+		device. Other character sequences are reserved. This file is
+		write only.
+
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_remote/<serial_number>/remote_mode
+Date:		July 2015
+Contact:	linux-input@vger.kernel.org
+Description:
+		Reading from this file reports the mode status of the
+		remote as indicated by the LED lights on the device. If no
+		reports have been received from the paired device, reading
+		from this file will report '-1'. The mode is read-only
+		and cannot be set through the driver.
diff --git a/Documentation/ABI/testing/sysfs-gpio b/Documentation/ABI/testing/sysfs-gpio
index 80f4c94c7..55ffa2df1 100644
--- a/Documentation/ABI/testing/sysfs-gpio
+++ b/Documentation/ABI/testing/sysfs-gpio
@@ -16,7 +16,8 @@ Description:
     /sys/class/gpio
 	/export ... asks the kernel to export a GPIO to userspace
 	/unexport ... to return a GPIO to the kernel
-	/gpioN ... for each exported GPIO #N
+	/gpioN ... for each exported GPIO #N OR
+	/<LINE-NAME> ... for a properly named GPIO line
 	    /value ... always readable, writes fail for input GPIOs
 	    /direction ... r/w as: in, out (default low); write: high, low
 	    /edge ... r/w as: none, falling, rising, both
diff --git a/Documentation/ABI/testing/sysfs-hypervisor-pmu b/Documentation/ABI/testing/sysfs-hypervisor-pmu
new file mode 100644
index 000000000..224faa105
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-hypervisor-pmu
@@ -0,0 +1,23 @@
+What:		/sys/hypervisor/pmu/pmu_mode
+Date:		August 2015
+KernelVersion:	4.3
+Contact:	Boris Ostrovsky <boris.ostrovsky@oracle.com>
+Description:
+		Describes mode that Xen's performance-monitoring unit (PMU)
+		uses. Accepted values are
+			"off"  -- PMU is disabled
+			"self" -- The guest can profile itself
+			"hv"   -- The guest can profile itself and, if it is
+				  privileged (e.g. dom0), the hypervisor
+			"all" --  The guest can profile itself, the hypervisor
+				  and all other guests. Only available to
+				  privileged guests.
+
+What:           /sys/hypervisor/pmu/pmu_features
+Date:           August 2015
+KernelVersion:  4.3
+Contact:        Boris Ostrovsky <boris.ostrovsky@oracle.com>
+Description:
+		Describes Xen PMU features (as an integer). A set bit indicates
+		that the corresponding feature is enabled. See
+		include/xen/interface/xenpmu.h for available features