Linux-libre 4.8.2-gnupck-4.8.2-gnu

8 files changed, 118 insertions, 49 deletions

diff --git a/Documentation/ABI/stable/sysfs-devices b/Documentation/ABI/stable/sysfs-devices
index 43f78b88d..df449d79b 100644
--- a/Documentation/ABI/stable/sysfs-devices
+++ b/Documentation/ABI/stable/sysfs-devices
@@ -1,7 +1,7 @@
 # Note: This documents additional properties of any device beyond what
 # is documented in Documentation/sysfs-rules.txt
 
-What:		/sys/devices/*/of_path
+What:		/sys/devices/*/of_node
 Date:		February 2015
 Contact:	Device Tree mailing list <devicetree@vger.kernel.org>
 Description:
diff --git a/Documentation/ABI/testing/configfs-acpi b/Documentation/ABI/testing/configfs-acpi
new file mode 100644
index 000000000..4ab4e99aa
--- /dev/null
+++ b/Documentation/ABI/testing/configfs-acpi
@@ -0,0 +1,36 @@
+What:		/config/acpi
+Date:		July 2016
+KernelVersion:	4.8
+Contact:	linux-acpi@vger.kernel.org
+Description:
+		This represents the ACPI subsystem entry point directory. It
+		contains sub-groups corresponding to ACPI configurable options.
+
+What:		/config/acpi/table
+Date:		July 2016
+KernelVersion:	4.8
+Description:
+
+		This group contains the configuration for user defined ACPI
+		tables. The attributes of a user define table are:
+
+		aml 		- a binary attribute that the user can use to
+				fill in the ACPI aml definitions. Once the aml
+				data is written to this file and the file is
+				closed the table will be loaded and ACPI devices
+				will be enumerated. To check if the operation is
+				successful the user must check the error code
+				for close(). If the operation is successful,
+				subsequent writes to this attribute will fail.
+
+		The rest of the attributes are read-only and are valid only
+		after the table has been loaded by filling the aml entry:
+
+		signature 	- ASCII table signature
+		length 		- length of table in bytes, including the header
+		revision 	- ACPI Specification minor version number
+		oem_id 		- ASCII OEM identification
+		oem_table_id 	- ASCII OEM table identification
+		oem_revision 	- OEM revision number
+		asl_compiler_id - ASCII ASL compiler vendor ID
+		asl_compiler_revision - ASL compiler version
diff --git a/Documentation/ABI/testing/configfs-iio b/Documentation/ABI/testing/configfs-iio
index 2483756fc..aebda53ec 100644
--- a/Documentation/ABI/testing/configfs-iio
+++ b/Documentation/ABI/testing/configfs-iio
@@ -19,3 +19,16 @@ KernelVersion:	4.4
 Description:
 		High resolution timers directory. Creating a directory here
 		will result in creating a hrtimer trigger in the IIO subsystem.
+
+What:		/config/iio/devices
+Date:		April 2016
+KernelVersion:	4.7
+Description:
+		Industrial IO software devices directory.
+
+What:		/config/iio/devices/dummy
+Date:		April 2016
+KernelVersion:	4.7
+Description:
+		Dummy IIO devices directory. Creating a directory here will result
+		in creating a dummy IIO device in the IIO subystem.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index df44998e7..fee35c00c 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -32,6 +32,13 @@ Description:
 		Description of the physical chip / device for device X.
 		Typically a part number.
 
+What:		/sys/bus/iio/devices/iio:deviceX/timestamp_clock
+KernelVersion:	4.5
+Contact:	linux-iio@vger.kernel.org
+Description:
+		String identifying current posix clock used to timestamp
+		buffered samples and events for device X.
+
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency
 What:		/sys/bus/iio/devices/triggerX/sampling_frequency
@@ -1565,3 +1572,10 @@ Description:
 		* X is in the plane of the propellers, perpendicular to Y axis,
 		  and positive towards the starboard side of the UAV ;
 		* Z is perpendicular to propellers plane and positive upwards.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_electricalconductivity_raw
+KernelVersion:	4.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled no offset etc.) electric conductivity reading that
+		can be processed to siemens per meter.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
index 3740f253d..6adba9058 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
+++ b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x
@@ -1,54 +1,41 @@
-What:		/sys/bus/iio/devices/iio:deviceX/tia_resistanceY
-		/sys/bus/iio/devices/iio:deviceX/tia_capacitanceY
-Date:		December 2015
-KernelVersion:
-Contact:	Andrew F. Davis <afd@ti.com>
-Description:
-		Get and set the resistance and the capacitance settings for the
-		Transimpedance Amplifier. Y is 1 for Rf1 and Cf1, Y is 2 for
-		Rf2 and Cf2 values.
-
-What:		/sys/bus/iio/devices/iio:deviceX/tia_separate_en
-Date:		December 2015
-KernelVersion:
-Contact:	Andrew F. Davis <afd@ti.com>
-Description:
-		Enable or disable separate settings for the TransImpedance
-		Amplifier above, when disabled both values are set by the
-		first channel.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_raw
-		/sys/bus/iio/devices/iio:deviceX/in_intensity_ledY_ambient_raw
-Date:		December 2015
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensityY_raw
+Date:		May 2016
 KernelVersion:
 Contact:	Andrew F. Davis <afd@ti.com>
 Description:
 		Get measured values from the ADC for these stages. Y is the
-		specific LED number. The values are expressed in 24-bit twos
-		complement.
+		specific stage number corresponding to datasheet stage names
+		as follows:
+		1 -> LED2
+		2 -> ALED2/LED3
+		3 -> LED1
+		4 -> ALED1/LED4
+		Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1
+		respectively which simply helper channels containing the
+		calculated difference in the value of stage 1 - 2 and 3 - 4.
+		The values are expressed in 24-bit twos complement.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_ledY-ledY_ambient_raw
-Date:		December 2015
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensityY_offset
+Date:		May 2016
 KernelVersion:
 Contact:	Andrew F. Davis <afd@ti.com>
 Description:
-		Get differential values from the ADC for these stages. Y is the
-		specific LED number. The values are expressed in 24-bit twos
-		complement for the specified LEDs.
+		Get and set the offset cancellation DAC setting for these
+		stages. The values are expressed in 5-bit sign-magnitude.
 
-What:		/sys/bus/iio/devices/iio:deviceX/out_current_ledY_offset
-		/sys/bus/iio/devices/iio:deviceX/out_current_ledY_ambient_offset
-Date:		December 2015
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensityY_resistance
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensityY_capacitance
+Date:		May 2016
 KernelVersion:
 Contact:	Andrew F. Davis <afd@ti.com>
 Description:
-		Get and set the offset cancellation DAC setting for these
-		stages. The values are expressed in 5-bit sign-magnitude.
+		Get and set the resistance and the capacitance settings for the
+		Transimpedance Amplifier during the associated stage.
 
-What:		/sys/bus/iio/devices/iio:deviceX/out_current_ledY_raw
-Date:		December 2015
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_raw
+Date:		May 2016
 KernelVersion:
 Contact:	Andrew F. Davis <afd@ti.com>
 Description:
-		Get and set the LED current for the specified LED. Y is the
-		specific LED number.
+		Get and set the LED current for the specified LED active during
+		this stage. Y is the specific stage number.
diff --git a/Documentation/ABI/testing/sysfs-class-net-batman-adv b/Documentation/ABI/testing/sysfs-class-net-batman-adv
index 518f6a1db..898106849 100644
--- a/Documentation/ABI/testing/sysfs-class-net-batman-adv
+++ b/Documentation/ABI/testing/sysfs-class-net-batman-adv
@@ -1,19 +1,10 @@
 
-What:		/sys/class/net/<iface>/batman-adv/throughput_override
-Date:		Feb 2014
-Contact:	Antonio Quartulli <antonio@meshcoding.com>
-description:
-		Defines the throughput value to be used by B.A.T.M.A.N. V
-		when estimating the link throughput using this interface.
-		If the value is set to 0 then batman-adv will try to
-		estimate the throughput by itself.
-
 What:           /sys/class/net/<iface>/batman-adv/elp_interval
 Date:           Feb 2014
 Contact:        Linus Lüssing <linus.luessing@web.de>
 Description:
                 Defines the interval in milliseconds in which batman
-                sends its probing packets for link quality measurements.
+                emits probing packets for neighbor sensing (ELP).
 
 What:           /sys/class/net/<iface>/batman-adv/iface_status
 Date:           May 2010
@@ -28,3 +19,12 @@ Description:
                 The /sys/class/net/<iface>/batman-adv/mesh_iface file
                 displays the batman mesh interface this <iface>
                 currently is associated with.
+
+What:           /sys/class/net/<iface>/batman-adv/throughput_override
+Date:           Feb 2014
+Contact:        Antonio Quartulli <a@unstable.cc>
+description:
+                Defines the throughput value to be used by B.A.T.M.A.N. V
+                when estimating the link throughput using this interface.
+                If the value is set to 0 then batman-adv will try to
+                estimate the throughput by itself.
diff --git a/Documentation/ABI/testing/sysfs-class-pwm b/Documentation/ABI/testing/sysfs-class-pwm
index c479d77b6..c20e61354 100644
--- a/Documentation/ABI/testing/sysfs-class-pwm
+++ b/Documentation/ABI/testing/sysfs-class-pwm
@@ -77,3 +77,12 @@ Description:
 		Enable/disable the PWM signal.
 		0 is disabled
 		1 is enabled
+
+What:		/sys/class/pwm/pwmchipN/pwmX/capture
+Date:		June 2016
+KernelVersion:	4.8
+Contact:	Lee Jones <lee.jones@linaro.org>
+Description:
+		Capture information about a PWM signal. The output format is a
+		pair unsigned integers (period and duty cycle), separated by a
+		single space.
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 16501334b..498741737 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -340,3 +340,13 @@ Description:	POWERNV CPUFreq driver's frequency throttle stats directory and
 		'policyX/throttle_stats' directory and all the attributes are same as
 		the /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats directory and
 		attributes which give the frequency throttle information of the chip.
+
+What:		/sys/devices/system/cpu/cpuX/regs/
+		/sys/devices/system/cpu/cpuX/regs/identification/
+		/sys/devices/system/cpu/cpuX/regs/identification/midr_el1
+		/sys/devices/system/cpu/cpuX/regs/identification/revidr_el1
+Date:		June 2016
+Contact:	Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org>
+Description:	AArch64 CPU registers
+		'identification' directory exposes the CPU ID registers for
+		 identifying model and revision of the CPU.