Initial import

12 files changed, 1700 insertions, 0 deletions

diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt
new file mode 100644
index 000000000..e550c8b98
--- /dev/null
+++ b/Documentation/acpi/apei/einj.txt
@@ -0,0 +1,177 @@
+			APEI Error INJection
+			~~~~~~~~~~~~~~~~~~~~
+
+EINJ provides a hardware error injection mechanism. It is very useful
+for debugging and testing APEI and RAS features in general.
+
+You need to check whether your BIOS supports EINJ first. For that, look
+for early boot messages similar to this one:
+
+ACPI: EINJ 0x000000007370A000 000150 (v01 INTEL           00000001 INTL 00000001)
+
+which shows that the BIOS is exposing an EINJ table - it is the
+mechanism through which the injection is done.
+
+Alternatively, look in /sys/firmware/acpi/tables for an "EINJ" file,
+which is a different representation of the same thing.
+
+It doesn't necessarily mean that EINJ is not supported if those above
+don't exist: before you give up, go into BIOS setup to see if the BIOS
+has an option to enable error injection. Look for something called WHEA
+or similar. Often, you need to enable an ACPI5 support option prior, in
+order to see the APEI,EINJ,... functionality supported and exposed by
+the BIOS menu.
+
+To use EINJ, make sure the following are options enabled in your kernel
+configuration:
+
+CONFIG_DEBUG_FS
+CONFIG_ACPI_APEI
+CONFIG_ACPI_APEI_EINJ
+
+The EINJ user interface is in <debugfs mount point>/apei/einj.
+
+The following files belong to it:
+
+- available_error_type
+
+  This file shows which error types are supported:
+
+  Error Type Value	Error Description
+  ================	=================
+  0x00000001		Processor Correctable
+  0x00000002		Processor Uncorrectable non-fatal
+  0x00000004		Processor Uncorrectable fatal
+  0x00000008		Memory Correctable
+  0x00000010		Memory Uncorrectable non-fatal
+  0x00000020		Memory Uncorrectable fatal
+  0x00000040		PCI Express Correctable
+  0x00000080		PCI Express Uncorrectable fatal
+  0x00000100		PCI Express Uncorrectable non-fatal
+  0x00000200		Platform Correctable
+  0x00000400		Platform Uncorrectable non-fatal
+  0x00000800		Platform Uncorrectable fatal
+
+  The format of the file contents are as above, except present are only
+  the available error types.
+
+- error_type
+
+  Set the value of the error type being injected. Possible error types
+  are defined in the file available_error_type above.
+
+- error_inject
+
+  Write any integer to this file to trigger the error injection. Make
+  sure you have specified all necessary error parameters, i.e. this
+  write should be the last step when injecting errors.
+
+- flags
+
+  Present for kernel versions 3.13 and above. Used to specify which
+  of param{1..4} are valid and should be used by the firmware during
+  injection. Value is a bitmask as specified in ACPI5.0 spec for the
+  SET_ERROR_TYPE_WITH_ADDRESS data structure:
+
+	Bit 0 - Processor APIC field valid (see param3 below).
+	Bit 1 - Memory address and mask valid (param1 and param2).
+	Bit 2 - PCIe (seg,bus,dev,fn) valid (see param4 below).
+
+  If set to zero, legacy behavior is mimicked where the type of
+  injection specifies just one bit set, and param1 is multiplexed.
+
+- param1
+
+  This file is used to set the first error parameter value. Its effect
+  depends on the error type specified in error_type. For example, if
+  error type is memory related type, the param1 should be a valid
+  physical memory address. [Unless "flag" is set - see above]
+
+- param2
+
+  Same use as param1 above. For example, if error type is of memory
+  related type, then param2 should be a physical memory address mask.
+  Linux requires page or narrower granularity, say, 0xfffffffffffff000.
+
+- param3
+
+  Used when the 0x1 bit is set in "flags" to specify the APIC id
+
+- param4
+  Used when the 0x4 bit is set in "flags" to specify target PCIe device
+
+- notrigger
+
+  The error injection mechanism is a two-step process. First inject the
+  error, then perform some actions to trigger it. Setting "notrigger"
+  to 1 skips the trigger phase, which *may* allow the user to cause the
+  error in some other context by a simple access to the CPU, memory
+  location, or device that is the target of the error injection. Whether
+  this actually works depends on what operations the BIOS actually
+  includes in the trigger phase.
+
+BIOS versions based on the ACPI 4.0 specification have limited options
+in controlling where the errors are injected. Your BIOS may support an
+extension (enabled with the param_extension=1 module parameter, or boot
+command line einj.param_extension=1). This allows the address and mask
+for memory injections to be specified by the param1 and param2 files in
+apei/einj.
+
+BIOS versions based on the ACPI 5.0 specification have more control over
+the target of the injection. For processor-related errors (type 0x1, 0x2
+and 0x4), you can set flags to 0x3 (param3 for bit 0, and param1 and
+param2 for bit 1) so that you have more information added to the error
+signature being injected. The actual data passed is this:
+
+	memory_address = param1;
+	memory_address_range = param2;
+	apicid = param3;
+	pcie_sbdf = param4;
+
+For memory errors (type 0x8, 0x10 and 0x20) the address is set using
+param1 with a mask in param2 (0x0 is equivalent to all ones). For PCI
+express errors (type 0x40, 0x80 and 0x100) the segment, bus, device and
+function are specified using param1:
+
+         31     24 23    16 15    11 10      8  7        0
+	+-------------------------------------------------+
+	| segment |   bus  | device | function | reserved |
+	+-------------------------------------------------+
+
+Anyway, you get the idea, if there's doubt just take a look at the code
+in drivers/acpi/apei/einj.c.
+
+An ACPI 5.0 BIOS may also allow vendor-specific errors to be injected.
+In this case a file named vendor will contain identifying information
+from the BIOS that hopefully will allow an application wishing to use
+the vendor-specific extension to tell that they are running on a BIOS
+that supports it. All vendor extensions have the 0x80000000 bit set in
+error_type. A file vendor_flags controls the interpretation of param1
+and param2 (1 = PROCESSOR, 2 = MEMORY, 4 = PCI). See your BIOS vendor
+documentation for details (and expect changes to this API if vendors
+creativity in using this feature expands beyond our expectations).
+
+
+An error injection example:
+
+# cd /sys/kernel/debug/apei/einj
+# cat available_error_type		# See which errors can be injected
+0x00000002	Processor Uncorrectable non-fatal
+0x00000008	Memory Correctable
+0x00000010	Memory Uncorrectable non-fatal
+# echo 0x12345000 > param1		# Set memory address for injection
+# echo $((-1 << 12)) > param2		# Mask 0xfffffffffffff000 - anywhere in this page
+# echo 0x8 > error_type			# Choose correctable memory error
+# echo 1 > error_inject			# Inject now
+
+You should see something like this in dmesg:
+
+[22715.830801] EDAC sbridge MC3: HANDLING MCE MEMORY ERROR
+[22715.834759] EDAC sbridge MC3: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010090
+[22715.834759] EDAC sbridge MC3: TSC 0
+[22715.834759] EDAC sbridge MC3: ADDR 12345000 EDAC sbridge MC3: MISC 144780c86
+[22715.834759] EDAC sbridge MC3: PROCESSOR 0:306e7 TIME 1422553404 SOCKET 0 APIC 0
+[22716.616173] EDAC MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x12345 offset:0x0 grain:32 syndrome:0x0 -  area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0)
+
+For more information about EINJ, please refer to ACPI specification
+version 4.0, section 17.5 and ACPI 5.0, section 18.6.
diff --git a/Documentation/acpi/apei/output_format.txt b/Documentation/acpi/apei/output_format.txt
new file mode 100644
index 000000000..0c49c197c
--- /dev/null
+++ b/Documentation/acpi/apei/output_format.txt
@@ -0,0 +1,147 @@
+                     APEI output format
+                     ~~~~~~~~~~~~~~~~~~
+
+APEI uses printk as hardware error reporting interface, the output
+format is as follow.
+
+<error record> :=
+APEI generic hardware error status
+severity: <integer>, <severity string>
+section: <integer>, severity: <integer>, <severity string>
+flags: <integer>
+<section flags strings>
+fru_id: <uuid string>
+fru_text: <string>
+section_type: <section type string>
+<section data>
+
+<severity string>* := recoverable | fatal | corrected | info
+
+<section flags strings># :=
+[primary][, containment warning][, reset][, threshold exceeded]\
+[, resource not accessible][, latent error]
+
+<section type string> := generic processor error | memory error | \
+PCIe error | unknown, <uuid string>
+
+<section data> :=
+<generic processor section data> | <memory section data> | \
+<pcie section data> | <null>
+
+<generic processor section data> :=
+[processor_type: <integer>, <proc type string>]
+[processor_isa: <integer>, <proc isa string>]
+[error_type: <integer>
+<proc error type strings>]
+[operation: <integer>, <proc operation string>]
+[flags: <integer>
+<proc flags strings>]
+[level: <integer>]
+[version_info: <integer>]
+[processor_id: <integer>]
+[target_address: <integer>]
+[requestor_id: <integer>]
+[responder_id: <integer>]
+[IP: <integer>]
+
+<proc type string>* := IA32/X64 | IA64
+
+<proc isa string>* := IA32 | IA64 | X64
+
+<processor error type strings># :=
+[cache error][, TLB error][, bus error][, micro-architectural error]
+
+<proc operation string>* := unknown or generic | data read | data write | \
+instruction execution
+
+<proc flags strings># :=
+[restartable][, precise IP][, overflow][, corrected]
+
+<memory section data> :=
+[error_status: <integer>]
+[physical_address: <integer>]
+[physical_address_mask: <integer>]
+[node: <integer>]
+[card: <integer>]
+[module: <integer>]
+[bank: <integer>]
+[device: <integer>]
+[row: <integer>]
+[column: <integer>]
+[bit_position: <integer>]
+[requestor_id: <integer>]
+[responder_id: <integer>]
+[target_id: <integer>]
+[error_type: <integer>, <mem error type string>]
+
+<mem error type string>* :=
+unknown | no error | single-bit ECC | multi-bit ECC | \
+single-symbol chipkill ECC | multi-symbol chipkill ECC | master abort | \
+target abort | parity error | watchdog timeout | invalid address | \
+mirror Broken | memory sparing | scrub corrected error | \
+scrub uncorrected error
+
+<pcie section data> :=
+[port_type: <integer>, <pcie port type string>]
+[version: <integer>.<integer>]
+[command: <integer>, status: <integer>]
+[device_id: <integer>:<integer>:<integer>.<integer>
+slot: <integer>
+secondary_bus: <integer>
+vendor_id: <integer>, device_id: <integer>
+class_code: <integer>]
+[serial number: <integer>, <integer>]
+[bridge: secondary_status: <integer>, control: <integer>]
+[aer_status: <integer>, aer_mask: <integer>
+<aer status string>
+[aer_uncor_severity: <integer>]
+aer_layer=<aer layer string>, aer_agent=<aer agent string>
+aer_tlp_header: <integer> <integer> <integer> <integer>]
+
+<pcie port type string>* := PCIe end point | legacy PCI end point | \
+unknown | unknown | root port | upstream switch port | \
+downstream switch port | PCIe to PCI/PCI-X bridge | \
+PCI/PCI-X to PCIe bridge | root complex integrated endpoint device | \
+root complex event collector
+
+if section severity is fatal or recoverable
+<aer status string># :=
+unknown | unknown | unknown | unknown | Data Link Protocol | \
+unknown | unknown | unknown | unknown | unknown | unknown | unknown | \
+Poisoned TLP | Flow Control Protocol | Completion Timeout | \
+Completer Abort | Unexpected Completion | Receiver Overflow | \
+Malformed TLP | ECRC | Unsupported Request
+else
+<aer status string># :=
+Receiver Error | unknown | unknown | unknown | unknown | unknown | \
+Bad TLP | Bad DLLP | RELAY_NUM Rollover | unknown | unknown | unknown | \
+Replay Timer Timeout | Advisory Non-Fatal
+fi
+
+<aer layer string> :=
+Physical Layer | Data Link Layer | Transaction Layer
+
+<aer agent string> :=
+Receiver ID | Requester ID | Completer ID | Transmitter ID
+
+Where, [] designate corresponding content is optional
+
+All <field string> description with * has the following format:
+
+field: <integer>, <field string>
+
+Where value of <integer> should be the position of "string" in <field
+string> description. Otherwise, <field string> will be "unknown".
+
+All <field strings> description with # has the following format:
+
+field: <integer>
+<field strings>
+
+Where each string in <fields strings> corresponding to one set bit of
+<integer>. The bit position is the position of "string" in <field
+strings> description.
+
+For more detailed explanation of every field, please refer to UEFI
+specification version 2.3 or later, section Appendix N: Common
+Platform Error Record.
diff --git a/Documentation/acpi/debug.txt b/Documentation/acpi/debug.txt
new file mode 100644
index 000000000..65bf47c46
--- /dev/null
+++ b/Documentation/acpi/debug.txt
@@ -0,0 +1,148 @@
+			ACPI Debug Output
+
+
+The ACPI CA, the Linux ACPI core, and some ACPI drivers can generate debug
+output.  This document describes how to use this facility.
+
+Compile-time configuration
+--------------------------
+
+ACPI debug output is globally enabled by CONFIG_ACPI_DEBUG.  If this config
+option is turned off, the debug messages are not even built into the
+kernel.
+
+Boot- and run-time configuration
+--------------------------------
+
+When CONFIG_ACPI_DEBUG=y, you can select the component and level of messages
+you're interested in.  At boot-time, use the acpi.debug_layer and
+acpi.debug_level kernel command line options.  After boot, you can use the
+debug_layer and debug_level files in /sys/module/acpi/parameters/ to control
+the debug messages.
+
+debug_layer (component)
+-----------------------
+
+The "debug_layer" is a mask that selects components of interest, e.g., a
+specific driver or part of the ACPI interpreter.  To build the debug_layer
+bitmask, look for the "#define _COMPONENT" in an ACPI source file.
+
+You can set the debug_layer mask at boot-time using the acpi.debug_layer
+command line argument, and you can change it after boot by writing values
+to /sys/module/acpi/parameters/debug_layer.
+
+The possible components are defined in include/acpi/acoutput.h and
+include/acpi/acpi_drivers.h.  Reading /sys/module/acpi/parameters/debug_layer
+shows the supported mask values, currently these:
+
+    ACPI_UTILITIES                  0x00000001
+    ACPI_HARDWARE                   0x00000002
+    ACPI_EVENTS                     0x00000004
+    ACPI_TABLES                     0x00000008
+    ACPI_NAMESPACE                  0x00000010
+    ACPI_PARSER                     0x00000020
+    ACPI_DISPATCHER                 0x00000040
+    ACPI_EXECUTER                   0x00000080
+    ACPI_RESOURCES                  0x00000100
+    ACPI_CA_DEBUGGER                0x00000200
+    ACPI_OS_SERVICES                0x00000400
+    ACPI_CA_DISASSEMBLER            0x00000800
+    ACPI_COMPILER                   0x00001000
+    ACPI_TOOLS                      0x00002000
+    ACPI_BUS_COMPONENT              0x00010000
+    ACPI_AC_COMPONENT               0x00020000
+    ACPI_BATTERY_COMPONENT          0x00040000
+    ACPI_BUTTON_COMPONENT           0x00080000
+    ACPI_SBS_COMPONENT              0x00100000
+    ACPI_FAN_COMPONENT              0x00200000
+    ACPI_PCI_COMPONENT              0x00400000
+    ACPI_POWER_COMPONENT            0x00800000
+    ACPI_CONTAINER_COMPONENT        0x01000000
+    ACPI_SYSTEM_COMPONENT           0x02000000
+    ACPI_THERMAL_COMPONENT          0x04000000
+    ACPI_MEMORY_DEVICE_COMPONENT    0x08000000
+    ACPI_VIDEO_COMPONENT            0x10000000
+    ACPI_PROCESSOR_COMPONENT        0x20000000
+
+debug_level
+-----------
+
+The "debug_level" is a mask that selects different types of messages, e.g.,
+those related to initialization, method execution, informational messages, etc.
+To build debug_level, look at the level specified in an ACPI_DEBUG_PRINT()
+statement.
+
+The ACPI interpreter uses several different levels, but the Linux
+ACPI core and ACPI drivers generally only use ACPI_LV_INFO.
+
+You can set the debug_level mask at boot-time using the acpi.debug_level
+command line argument, and you can change it after boot by writing values
+to /sys/module/acpi/parameters/debug_level.
+
+The possible levels are defined in include/acpi/acoutput.h.  Reading
+/sys/module/acpi/parameters/debug_level shows the supported mask values,
+currently these:
+
+    ACPI_LV_INIT                    0x00000001
+    ACPI_LV_DEBUG_OBJECT            0x00000002
+    ACPI_LV_INFO                    0x00000004
+    ACPI_LV_INIT_NAMES              0x00000020
+    ACPI_LV_PARSE                   0x00000040
+    ACPI_LV_LOAD                    0x00000080
+    ACPI_LV_DISPATCH                0x00000100
+    ACPI_LV_EXEC                    0x00000200
+    ACPI_LV_NAMES                   0x00000400
+    ACPI_LV_OPREGION                0x00000800
+    ACPI_LV_BFIELD                  0x00001000
+    ACPI_LV_TABLES                  0x00002000
+    ACPI_LV_VALUES                  0x00004000
+    ACPI_LV_OBJECTS                 0x00008000
+    ACPI_LV_RESOURCES               0x00010000
+    ACPI_LV_USER_REQUESTS           0x00020000
+    ACPI_LV_PACKAGE                 0x00040000
+    ACPI_LV_ALLOCATIONS             0x00100000
+    ACPI_LV_FUNCTIONS               0x00200000
+    ACPI_LV_OPTIMIZATIONS           0x00400000
+    ACPI_LV_MUTEX                   0x01000000
+    ACPI_LV_THREADS                 0x02000000
+    ACPI_LV_IO                      0x04000000
+    ACPI_LV_INTERRUPTS              0x08000000
+    ACPI_LV_AML_DISASSEMBLE         0x10000000
+    ACPI_LV_VERBOSE_INFO            0x20000000
+    ACPI_LV_FULL_TABLES             0x40000000
+    ACPI_LV_EVENTS                  0x80000000
+
+Examples
+--------
+
+For example, drivers/acpi/bus.c contains this:
+
+    #define _COMPONENT              ACPI_BUS_COMPONENT
+    ...
+    ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device insertion detected\n"));
+
+To turn on this message, set the ACPI_BUS_COMPONENT bit in acpi.debug_layer
+and the ACPI_LV_INFO bit in acpi.debug_level.  (The ACPI_DEBUG_PRINT
+statement uses ACPI_DB_INFO, which is macro based on the ACPI_LV_INFO
+definition.)
+
+Enable all AML "Debug" output (stores to the Debug object while interpreting
+AML) during boot:
+
+    acpi.debug_layer=0xffffffff acpi.debug_level=0x2
+
+Enable PCI and PCI interrupt routing debug messages:
+
+    acpi.debug_layer=0x400000 acpi.debug_level=0x4
+
+Enable all ACPI hardware-related messages:
+
+    acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
+
+Enable all ACPI_DB_INFO messages after boot:
+
+    # echo 0x4 > /sys/module/acpi/parameters/debug_level
+
+Show all valid component values:
+
+    # cat /sys/module/acpi/parameters/debug_layer
diff --git a/Documentation/acpi/dsdt-override.txt b/Documentation/acpi/dsdt-override.txt
new file mode 100644
index 000000000..784841caa
--- /dev/null
+++ b/Documentation/acpi/dsdt-override.txt
@@ -0,0 +1,7 @@
+Linux supports a method of overriding the BIOS DSDT:
+
+CONFIG_ACPI_CUSTOM_DSDT builds the image into the kernel.
+
+When to use this method is described in detail on the
+Linux/ACPI home page:
+https://01.org/linux-acpi/documentation/overriding-dsdt
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
new file mode 100644
index 000000000..15dfce708
--- /dev/null
+++ b/Documentation/acpi/enumeration.txt
@@ -0,0 +1,361 @@
+ACPI based device enumeration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ACPI 5 introduced a set of new resources (UartTSerialBus, I2cSerialBus,
+SpiSerialBus, GpioIo and GpioInt) which can be used in enumerating slave
+devices behind serial bus controllers.
+
+In addition we are starting to see peripherals integrated in the
+SoC/Chipset to appear only in ACPI namespace. These are typically devices
+that are accessed through memory-mapped registers.
+
+In order to support this and re-use the existing drivers as much as
+possible we decided to do following:
+
+	o Devices that have no bus connector resource are represented as
+	  platform devices.
+
+	o Devices behind real busses where there is a connector resource
+	  are represented as struct spi_device or struct i2c_device
+	  (standard UARTs are not busses so there is no struct uart_device).
+
+As both ACPI and Device Tree represent a tree of devices (and their
+resources) this implementation follows the Device Tree way as much as
+possible.
+
+The ACPI implementation enumerates devices behind busses (platform, SPI and
+I2C), creates the physical devices and binds them to their ACPI handle in
+the ACPI namespace.
+
+This means that when ACPI_HANDLE(dev) returns non-NULL the device was
+enumerated from ACPI namespace. This handle can be used to extract other
+device-specific configuration. There is an example of this below.
+
+Platform bus support
+~~~~~~~~~~~~~~~~~~~~
+Since we are using platform devices to represent devices that are not
+connected to any physical bus we only need to implement a platform driver
+for the device and add supported ACPI IDs. If this same IP-block is used on
+some other non-ACPI platform, the driver might work out of the box or needs
+some minor changes.
+
+Adding ACPI support for an existing driver should be pretty
+straightforward. Here is the simplest example:
+
+	#ifdef CONFIG_ACPI
+	static struct acpi_device_id mydrv_acpi_match[] = {
+		/* ACPI IDs here */
+		{ }
+	};
+	MODULE_DEVICE_TABLE(acpi, mydrv_acpi_match);
+	#endif
+
+	static struct platform_driver my_driver = {
+		...
+		.driver = {
+			.acpi_match_table = ACPI_PTR(mydrv_acpi_match),
+		},
+	};
+
+If the driver needs to perform more complex initialization like getting and
+configuring GPIOs it can get its ACPI handle and extract this information
+from ACPI tables.
+
+DMA support
+~~~~~~~~~~~
+DMA controllers enumerated via ACPI should be registered in the system to
+provide generic access to their resources. For example, a driver that would
+like to be accessible to slave devices via generic API call
+dma_request_slave_channel() must register itself at the end of the probe
+function like this:
+
+	err = devm_acpi_dma_controller_register(dev, xlate_func, dw);
+	/* Handle the error if it's not a case of !CONFIG_ACPI */
+
+and implement custom xlate function if needed (usually acpi_dma_simple_xlate()
+is enough) which converts the FixedDMA resource provided by struct
+acpi_dma_spec into the corresponding DMA channel. A piece of code for that case
+could look like:
+
+	#ifdef CONFIG_ACPI
+	struct filter_args {
+		/* Provide necessary information for the filter_func */
+		...
+	};
+
+	static bool filter_func(struct dma_chan *chan, void *param)
+	{
+		/* Choose the proper channel */
+		...
+	}
+
+	static struct dma_chan *xlate_func(struct acpi_dma_spec *dma_spec,
+			struct acpi_dma *adma)
+	{
+		dma_cap_mask_t cap;
+		struct filter_args args;
+
+		/* Prepare arguments for filter_func */
+		...
+		return dma_request_channel(cap, filter_func, &args);
+	}
+	#else
+	static struct dma_chan *xlate_func(struct acpi_dma_spec *dma_spec,
+			struct acpi_dma *adma)
+	{
+		return NULL;
+	}
+	#endif
+
+dma_request_slave_channel() will call xlate_func() for each registered DMA
+controller. In the xlate function the proper channel must be chosen based on
+information in struct acpi_dma_spec and the properties of the controller
+provided by struct acpi_dma.
+
+Clients must call dma_request_slave_channel() with the string parameter that
+corresponds to a specific FixedDMA resource. By default "tx" means the first
+entry of the FixedDMA resource array, "rx" means the second entry. The table
+below shows a layout:
+
+	Device (I2C0)
+	{
+		...
+		Method (_CRS, 0, NotSerialized)
+		{
+			Name (DBUF, ResourceTemplate ()
+			{
+				FixedDMA (0x0018, 0x0004, Width32bit, _Y48)
+				FixedDMA (0x0019, 0x0005, Width32bit, )
+			})
+		...
+		}
+	}
+
+So, the FixedDMA with request line 0x0018 is "tx" and next one is "rx" in
+this example.
+
+In robust cases the client unfortunately needs to call
+acpi_dma_request_slave_chan_by_index() directly and therefore choose the
+specific FixedDMA resource by its index.
+
+SPI serial bus support
+~~~~~~~~~~~~~~~~~~~~~~
+Slave devices behind SPI bus have SpiSerialBus resource attached to them.
+This is extracted automatically by the SPI core and the slave devices are
+enumerated once spi_register_master() is called by the bus driver.
+
+Here is what the ACPI namespace for a SPI slave might look like:
+
+	Device (EEP0)
+	{
+		Name (_ADR, 1)
+		Name (_CID, Package() {
+			"ATML0025",
+			"AT25",
+		})
+		...
+		Method (_CRS, 0, NotSerialized)
+		{
+			SPISerialBus(1, PolarityLow, FourWireMode, 8,
+				ControllerInitiated, 1000000, ClockPolarityLow,
+				ClockPhaseFirst, "\\_SB.PCI0.SPI1",)
+		}
+		...
+
+The SPI device drivers only need to add ACPI IDs in a similar way than with
+the platform device drivers. Below is an example where we add ACPI support
+to at25 SPI eeprom driver (this is meant for the above ACPI snippet):
+
+	#ifdef CONFIG_ACPI
+	static struct acpi_device_id at25_acpi_match[] = {
+		{ "AT25", 0 },
+		{ },
+	};
+	MODULE_DEVICE_TABLE(acpi, at25_acpi_match);
+	#endif
+
+	static struct spi_driver at25_driver = {
+		.driver = {
+			...
+			.acpi_match_table = ACPI_PTR(at25_acpi_match),
+		},
+	};
+
+Note that this driver actually needs more information like page size of the
+eeprom etc. but at the time writing this there is no standard way of
+passing those. One idea is to return this in _DSM method like:
+
+	Device (EEP0)
+	{
+		...
+		Method (_DSM, 4, NotSerialized)
+		{
+			Store (Package (6)
+			{
+				"byte-len", 1024,
+				"addr-mode", 2,
+				"page-size, 32
+			}, Local0)
+
+			// Check UUIDs etc.
+
+			Return (Local0)
+		}
+
+Then the at25 SPI driver can get this configuration by calling _DSM on its
+ACPI handle like:
+
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_object_list input;
+	acpi_status status;
+
+	/* Fill in the input buffer */
+
+	status = acpi_evaluate_object(ACPI_HANDLE(&spi->dev), "_DSM",
+				      &input, &output);
+	if (ACPI_FAILURE(status))
+		/* Handle the error */
+
+	/* Extract the data here */
+
+	kfree(output.pointer);
+
+I2C serial bus support
+~~~~~~~~~~~~~~~~~~~~~~
+The slaves behind I2C bus controller only need to add the ACPI IDs like
+with the platform and SPI drivers. The I2C core automatically enumerates
+any slave devices behind the controller device once the adapter is
+registered.
+
+Below is an example of how to add ACPI support to the existing mpu3050
+input driver:
+
+	#ifdef CONFIG_ACPI
+	static struct acpi_device_id mpu3050_acpi_match[] = {
+		{ "MPU3050", 0 },
+		{ },
+	};
+	MODULE_DEVICE_TABLE(acpi, mpu3050_acpi_match);
+	#endif
+
+	static struct i2c_driver mpu3050_i2c_driver = {
+		.driver	= {
+			.name	= "mpu3050",
+			.owner	= THIS_MODULE,
+			.pm	= &mpu3050_pm,
+			.of_match_table = mpu3050_of_match,
+			.acpi_match_table = ACPI_PTR(mpu3050_acpi_match),
+		},
+		.probe		= mpu3050_probe,
+		.remove		= mpu3050_remove,
+		.id_table	= mpu3050_ids,
+	};
+
+GPIO support
+~~~~~~~~~~~~
+ACPI 5 introduced two new resources to describe GPIO connections: GpioIo
+and GpioInt. These resources can be used to pass GPIO numbers used by
+the device to the driver. ACPI 5.1 extended this with _DSD (Device
+Specific Data) which made it possible to name the GPIOs among other things.
+
+For example:
+
+Device (DEV)
+{
+	Method (_CRS, 0, NotSerialized)
+	{
+		Name (SBUF, ResourceTemplate()
+		{
+			...
+			// Used to power on/off the device
+			GpioIo (Exclusive, PullDefault, 0x0000, 0x0000,
+				IoRestrictionOutputOnly, "\\_SB.PCI0.GPI0",
+				0x00, ResourceConsumer,,)
+			{
+				// Pin List
+				0x0055
+			}
+
+			// Interrupt for the device
+			GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone,
+				 0x0000, "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer,,)
+			{
+				// Pin list
+				0x0058
+			}
+
+			...
+
+		}
+
+		Return (SBUF)
+	}
+
+	// ACPI 5.1 _DSD used for naming the GPIOs
+	Name (_DSD, Package ()
+	{
+		ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+		Package ()
+		{
+			Package () {"power-gpios", Package() {^DEV, 0, 0, 0 }},
+			Package () {"irq-gpios", Package() {^DEV, 1, 0, 0 }},
+		}
+	})
+	...
+
+These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0"
+specifies the path to the controller. In order to use these GPIOs in Linux
+we need to translate them to the corresponding Linux GPIO descriptors.
+
+There is a standard GPIO API for that and is documented in
+Documentation/gpio/.
+
+In the above example we can get the corresponding two GPIO descriptors with
+a code like this:
+
+	#include <linux/gpio/consumer.h>
+	...
+
+	struct gpio_desc *irq_desc, *power_desc;
+
+	irq_desc = gpiod_get(dev, "irq");
+	if (IS_ERR(irq_desc))
+		/* handle error */
+
+	power_desc = gpiod_get(dev, "power");
+	if (IS_ERR(power_desc))
+		/* handle error */
+
+	/* Now we can use the GPIO descriptors */
+
+There are also devm_* versions of these functions which release the
+descriptors once the device is released.
+
+See Documentation/acpi/gpio-properties.txt for more information about the
+_DSD binding related to GPIOs.
+
+MFD devices
+~~~~~~~~~~~
+The MFD devices register their children as platform devices. For the child
+devices there needs to be an ACPI handle that they can use to reference
+parts of the ACPI namespace that relate to them. In the Linux MFD subsystem
+we provide two ways:
+
+	o The children share the parent ACPI handle.
+	o The MFD cell can specify the ACPI id of the device.
+
+For the first case, the MFD drivers do not need to do anything. The
+resulting child platform device will have its ACPI_COMPANION() set to point
+to the parent device.
+
+If the ACPI namespace has a device that we can match using an ACPI id,
+the id should be set like:
+
+	static struct mfd_cell my_subdevice_cell = {
+		.name = "my_subdevice",
+		/* set the resources relative to the parent */
+		.acpi_pnpid = "XYZ0001",
+	};
+
+The ACPI id "XYZ0001" is then used to lookup an ACPI device directly under
+the MFD device and if found, that ACPI companion device is bound to the
+resulting child platform device.
diff --git a/Documentation/acpi/gpio-properties.txt b/Documentation/acpi/gpio-properties.txt
new file mode 100644
index 000000000..f35dad11f
--- /dev/null
+++ b/Documentation/acpi/gpio-properties.txt
@@ -0,0 +1,96 @@
+_DSD Device Properties Related to GPIO
+--------------------------------------
+
+With the release of ACPI 5.1, the _DSD configuration object finally
+allows names to be given to GPIOs (and other things as well) returned
+by _CRS.  Previously, we were only able to use an integer index to find
+the corresponding GPIO, which is pretty error prone (it depends on
+the _CRS output ordering, for example).
+
+With _DSD we can now query GPIOs using a name instead of an integer
+index, like the ASL example below shows:
+
+  // Bluetooth device with reset and shutdown GPIOs
+  Device (BTH)
+  {
+      Name (_HID, ...)
+
+      Name (_CRS, ResourceTemplate ()
+      {
+          GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
+                  "\\_SB.GPO0", 0, ResourceConsumer) {15}
+          GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly,
+                  "\\_SB.GPO0", 0, ResourceConsumer) {27, 31}
+      })
+
+      Name (_DSD, Package ()
+      {
+          ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+          Package ()
+	  {
+              Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }},
+              Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }},
+          }
+      })
+  }
+
+The format of the supported GPIO property is:
+
+  Package () { "name", Package () { ref, index, pin, active_low }}
+
+  ref - The device that has _CRS containing GpioIo()/GpioInt() resources,
+        typically this is the device itself (BTH in our case).
+  index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero.
+  pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero.
+  active_low - If 1 the GPIO is marked as active_low.
+
+Since ACPI GpioIo() resource does not have a field saying whether it is
+active low or high, the "active_low" argument can be used here.  Setting
+it to 1 marks the GPIO as active low.
+
+In our Bluetooth example the "reset-gpio" refers to the second GpioIo()
+resource, second pin in that resource with the GPIO number of 31.
+
+ACPI GPIO Mappings Provided by Drivers
+--------------------------------------
+
+There are systems in which the ACPI tables do not contain _DSD but provide _CRS
+with GpioIo()/GpioInt() resources and device drivers still need to work with
+them.
+
+In those cases ACPI device identification objects, _HID, _CID, _CLS, _SUB, _HRV,
+available to the driver can be used to identify the device and that is supposed
+to be sufficient to determine the meaning and purpose of all of the GPIO lines
+listed by the GpioIo()/GpioInt() resources returned by _CRS.  In other words,
+the driver is supposed to know what to use the GpioIo()/GpioInt() resources for
+once it has identified the device.  Having done that, it can simply assign names
+to the GPIO lines it is going to use and provide the GPIO subsystem with a
+mapping between those names and the ACPI GPIO resources corresponding to them.
+
+To do that, the driver needs to define a mapping table as a NULL-terminated
+array of struct acpi_gpio_mapping objects that each contain a name, a pointer
+to an array of line data (struct acpi_gpio_params) objects and the size of that
+array.  Each struct acpi_gpio_params object consists of three fields,
+crs_entry_index, line_index, active_low, representing the index of the target
+GpioIo()/GpioInt() resource in _CRS starting from zero, the index of the target
+line in that resource starting from zero, and the active-low flag for that line,
+respectively, in analogy with the _DSD GPIO property format specified above.
+
+For the example Bluetooth device discussed previously the data structures in
+question would look like this:
+
+static const struct acpi_gpio_params reset_gpio = { 1, 1, false };
+static const struct acpi_gpio_params shutdown_gpio = { 0, 0, false };
+
+static const struct acpi_gpio_mapping bluetooth_acpi_gpios[] = {
+  { "reset-gpio", &reset_gpio, 1 },
+  { "shutdown-gpio", &shutdown_gpio, 1 },
+  { },
+};
+
+Next, the mapping table needs to be passed as the second argument to
+acpi_dev_add_driver_gpios() that will register it with the ACPI device object
+pointed to by its first argument.  That should be done in the driver's .probe()
+routine.  On removal, the driver should unregister its GPIO mapping table by
+calling acpi_dev_remove_driver_gpios() on the ACPI device object where that
+table was previously registered.
diff --git a/Documentation/acpi/initrd_table_override.txt b/Documentation/acpi/initrd_table_override.txt
new file mode 100644
index 000000000..35c3f5415
--- /dev/null
+++ b/Documentation/acpi/initrd_table_override.txt
@@ -0,0 +1,94 @@
+Overriding ACPI tables via initrd
+=================================
+
+1) Introduction (What is this about)
+2) What is this for
+3) How does it work
+4) References (Where to retrieve userspace tools)
+
+1) What is this about
+---------------------
+
+If the ACPI_INITRD_TABLE_OVERRIDE compile option is true, it is possible to
+override nearly any ACPI table provided by the BIOS with an instrumented,
+modified one.
+
+For a full list of ACPI tables that can be overridden, take a look at
+the char *table_sigs[MAX_ACPI_SIGNATURE]; definition in drivers/acpi/osl.c
+All ACPI tables iasl (Intel's ACPI compiler and disassembler) knows should
+be overridable, except:
+   - ACPI_SIG_RSDP (has a signature of 6 bytes)
+   - ACPI_SIG_FACS (does not have an ordinary ACPI table header)
+Both could get implemented as well.
+
+
+2) What is this for
+-------------------
+
+Please keep in mind that this is a debug option.
+ACPI tables should not get overridden for productive use.
+If BIOS ACPI tables are overridden the kernel will get tainted with the
+TAINT_OVERRIDDEN_ACPI_TABLE flag.
+Complain to your platform/BIOS vendor if you find a bug which is so sever
+that a workaround is not accepted in the Linux kernel.
+
+Still, it can and should be enabled in any kernel, because:
+  - There is no functional change with not instrumented initrds
+  - It provides a powerful feature to easily debug and test ACPI BIOS table
+    compatibility with the Linux kernel.
+
+
+3) How does it work
+-------------------
+
+# Extract the machine's ACPI tables:
+cd /tmp
+acpidump >acpidump
+acpixtract -a acpidump
+# Disassemble, modify and recompile them:
+iasl -d *.dat
+# For example add this statement into a _PRT (PCI Routing Table) function
+# of the DSDT:
+Store("HELLO WORLD", debug)
+iasl -sa dsdt.dsl
+# Add the raw ACPI tables to an uncompressed cpio archive.
+# They must be put into a /kernel/firmware/acpi directory inside the
+# cpio archive.
+# The uncompressed cpio archive must be the first.
+# Other, typically compressed cpio archives, must be
+# concatenated on top of the uncompressed one.
+mkdir -p kernel/firmware/acpi
+cp dsdt.aml kernel/firmware/acpi
+# A maximum of: #define ACPI_OVERRIDE_TABLES 10
+# tables are  currently allowed (see osl.c):
+iasl -sa facp.dsl
+iasl -sa ssdt1.dsl
+cp facp.aml kernel/firmware/acpi
+cp ssdt1.aml kernel/firmware/acpi
+# Create the uncompressed cpio archive and concatenate the original initrd
+# on top:
+find kernel | cpio -H newc --create > /boot/instrumented_initrd
+cat /boot/initrd >>/boot/instrumented_initrd
+# reboot with increased acpi debug level, e.g. boot params:
+acpi.debug_level=0x2 acpi.debug_layer=0xFFFFFFFF
+# and check your syslog:
+[    1.268089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
+[    1.272091] [ACPI Debug]  String [0x0B] "HELLO WORLD"
+
+iasl is able to disassemble and recompile quite a lot different,
+also static ACPI tables.
+
+
+4) Where to retrieve userspace tools
+------------------------------------
+
+iasl and acpixtract are part of Intel's ACPICA project:
+http://acpica.org/
+and should be packaged by distributions (for example in the acpica package
+on SUSE).
+
+acpidump can be found in Len Browns pmtools:
+ftp://kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools/acpidump
+This tool is also part of the acpica package on SUSE.
+Alternatively, used ACPI tables can be retrieved via sysfs in latest kernels:
+/sys/firmware/acpi/tables
diff --git a/Documentation/acpi/method-customizing.txt b/Documentation/acpi/method-customizing.txt
new file mode 100644
index 000000000..5f55373dd
--- /dev/null
+++ b/Documentation/acpi/method-customizing.txt
@@ -0,0 +1,73 @@
+Linux ACPI Custom Control Method How To
+=======================================
+
+Written by Zhang Rui <rui.zhang@intel.com>
+
+
+Linux supports customizing ACPI control methods at runtime.
+
+Users can use this to
+1. override an existing method which may not work correctly,
+   or just for debugging purposes.
+2. insert a completely new method in order to create a missing
+   method such as _OFF, _ON, _STA, _INI, etc.
+For these cases, it is far simpler to dynamically install a single
+control method rather than override the entire DSDT, because kernel
+rebuild/reboot is not needed and test result can be got in minutes.
+
+Note: Only ACPI METHOD can be overridden, any other object types like
+      "Device", "OperationRegion", are not recognized.
+Note: The same ACPI control method can be overridden for many times,
+      and it's always the latest one that used by Linux/kernel.
+Note: To get the ACPI debug object output (Store (AAAA, Debug)),
+      please run "echo 1 > /sys/module/acpi/parameters/aml_debug_output".
+
+1. override an existing method
+   a) get the ACPI table via ACPI sysfs I/F. e.g. to get the DSDT,
+      just run "cat /sys/firmware/acpi/tables/DSDT > /tmp/dsdt.dat"
+   b) disassemble the table by running "iasl -d dsdt.dat".
+   c) rewrite the ASL code of the method and save it in a new file,
+   d) package the new file (psr.asl) to an ACPI table format.
+      Here is an example of a customized \_SB._AC._PSR method,
+
+      DefinitionBlock ("", "SSDT", 1, "", "", 0x20080715)
+      {
+	External (ACON)
+
+	Method (\_SB_.AC._PSR, 0, NotSerialized)
+	{
+		Store ("In AC _PSR", Debug)
+		Return (ACON)
+	}
+      }
+      Note that the full pathname of the method in ACPI namespace
+      should be used.
+      And remember to use "External" to declare external objects.
+   e) assemble the file to generate the AML code of the method.
+      e.g. "iasl psr.asl" (psr.aml is generated as a result)
+   f) mount debugfs by "mount -t debugfs none /sys/kernel/debug"
+   g) override the old method via the debugfs by running
+      "cat /tmp/psr.aml > /sys/kernel/debug/acpi/custom_method"
+
+2. insert a new method
+   This is easier than overriding an existing method.
+   We just need to create the ASL code of the method we want to
+   insert and then follow the step c) ~ g) in section 1.
+
+3. undo your changes
+   The "undo" operation is not supported for a new inserted method
+   right now, i.e. we can not remove a method currently.
+   For an overrided method, in order to undo your changes, please
+   save a copy of the method original ASL code in step c) section 1,
+   and redo step c) ~ g) to override the method with the original one.
+
+
+Note: We can use a kernel with multiple custom ACPI method running,
+      But each individual write to debugfs can implement a SINGLE
+      method override. i.e. if we want to insert/override multiple
+      ACPI methods, we need to redo step c) ~ g) for multiple times.
+
+Note: Be aware that root can mis-use this driver to modify arbitrary
+      memory and gain additional rights, if root's privileges got
+      restricted (for example if root is not allowed to load additional
+      modules after boot).
diff --git a/Documentation/acpi/method-tracing.txt b/Documentation/acpi/method-tracing.txt
new file mode 100644
index 000000000..f6efb1ea5
--- /dev/null
+++ b/Documentation/acpi/method-tracing.txt
@@ -0,0 +1,26 @@
+/sys/module/acpi/parameters/:
+
+trace_method_name
+	The AML method name that the user wants to trace
+
+trace_debug_layer
+	The temporary debug_layer used when tracing the method.
+	Using 0xffffffff by default if it is 0.
+
+trace_debug_level
+	The temporary debug_level used when tracing the method.
+	Using 0x00ffffff by default if it is 0.
+
+trace_state
+	The status of the tracing feature.
+
+	"enabled" means this feature is enabled
+	and the AML method is traced every time it's executed.
+
+	"1" means this feature is enabled and the AML method
+	will only be traced during the next execution.
+
+	"disabled" means this feature is disabled.
+	Users can enable/disable this debug tracing feature by
+	"echo string > /sys/module/acpi/parameters/trace_state".
+	"string" should be one of "enable", "disable" and "1".
diff --git a/Documentation/acpi/namespace.txt b/Documentation/acpi/namespace.txt
new file mode 100644
index 000000000..1860cb386
--- /dev/null
+++ b/Documentation/acpi/namespace.txt
@@ -0,0 +1,388 @@
+ACPI Device Tree - Representation of ACPI Namespace
+
+Copyright (C) 2013, Intel Corporation
+Author: Lv Zheng <lv.zheng@intel.com>
+
+
+Abstract:
+
+The Linux ACPI subsystem converts ACPI namespace objects into a Linux
+device tree under the /sys/devices/LNXSYSTEM:00 and updates it upon
+receiving ACPI hotplug notification events.  For each device object in this
+hierarchy there is a corresponding symbolic link in the
+/sys/bus/acpi/devices.
+This document illustrates the structure of the ACPI device tree.
+
+
+Credit:
+
+Thanks for the help from Zhang Rui <rui.zhang@intel.com> and Rafael J.
+Wysocki <rafael.j.wysocki@intel.com>.
+
+
+1. ACPI Definition Blocks
+
+   The ACPI firmware sets up RSDP (Root System Description Pointer) in the
+   system memory address space pointing to the XSDT (Extended System
+   Description Table).  The XSDT always points to the FADT (Fixed ACPI
+   Description Table) using its first entry, the data within the FADT
+   includes various fixed-length entries that describe fixed ACPI features
+   of the hardware.  The FADT contains a pointer to the DSDT
+   (Differentiated System Descripition Table).  The XSDT also contains
+   entries pointing to possibly multiple SSDTs (Secondary System
+   Description Table).
+
+   The DSDT and SSDT data is organized in data structures called definition
+   blocks that contain definitions of various objects, including ACPI
+   control methods, encoded in AML (ACPI Machine Language).  The data block
+   of the DSDT along with the contents of SSDTs represents a hierarchical
+   data structure called the ACPI namespace whose topology reflects the
+   structure of the underlying hardware platform.
+
+   The relationships between ACPI System Definition Tables described above
+   are illustrated in the following diagram.
+
+     +---------+    +-------+    +--------+    +------------------------+
+     |  RSDP   | +->| XSDT  | +->|  FADT  |    |  +-------------------+ |
+     +---------+ |  +-------+ |  +--------+  +-|->|       DSDT        | |
+     | Pointer | |  | Entry |-+  | ...... |  | |  +-------------------+ |
+     +---------+ |  +-------+    | X_DSDT |--+ |  | Definition Blocks | |
+     | Pointer |-+  | ..... |    | ...... |    |  +-------------------+ |
+     +---------+    +-------+    +--------+    |  +-------------------+ |
+                    | Entry |------------------|->|       SSDT        | |
+                    +- - - -+                  |  +-------------------| |
+                    | Entry | - - - - - - - -+ |  | Definition Blocks | |
+                    +- - - -+                | |  +-------------------+ |
+                                             | |  +- - - - - - - - - -+ |
+                                             +-|->|       SSDT        | |
+                                               |  +-------------------+ |
+                                               |  | Definition Blocks | |
+                                               |  +- - - - - - - - - -+ |
+                                               +------------------------+
+                                                           |
+                                              OSPM Loading |
+                                                          \|/
+                                                    +----------------+
+                                                    | ACPI Namespace |
+                                                    +----------------+
+
+                     Figure 1. ACPI Definition Blocks
+
+   NOTE: RSDP can also contain a pointer to the RSDT (Root System
+         Description Table).  Platforms provide RSDT to enable
+         compatibility with ACPI 1.0 operating systems.  The OS is expected
+         to use XSDT, if present.
+
+
+2. Example ACPI Namespace
+
+   All definition blocks are loaded into a single namespace.  The namespace
+   is a hierarchy of objects identified by names and paths.
+   The following naming conventions apply to object names in the ACPI
+   namespace:
+   1. All names are 32 bits long.
+   2. The first byte of a name must be one of 'A' - 'Z', '_'.
+   3. Each of the remaining bytes of a name must be one of 'A' - 'Z', '0'
+      - '9', '_'.
+   4. Names starting with '_' are reserved by the ACPI specification.
+   5. The '\' symbol represents the root of the namespace (i.e. names
+      prepended with '\' are relative to the namespace root).
+   6. The '^' symbol represents the parent of the current namespace node
+      (i.e. names prepended with '^' are relative to the parent of the
+      current namespace node).
+
+   The figure below shows an example ACPI namespace.
+
+   +------+
+   | \    |                     Root
+   +------+
+     |
+     | +------+
+     +-| _PR  |                 Scope(_PR): the processor namespace
+     | +------+
+     |   |
+     |   | +------+
+     |   +-| CPU0 |             Processor(CPU0): the first processor
+     |     +------+
+     |
+     | +------+
+     +-| _SB  |                 Scope(_SB): the system bus namespace
+     | +------+
+     |   |
+     |   | +------+
+     |   +-| LID0 |             Device(LID0); the lid device
+     |   | +------+
+     |   |   |
+     |   |   | +------+
+     |   |   +-| _HID |         Name(_HID, "PNP0C0D"): the hardware ID
+     |   |   | +------+
+     |   |   |
+     |   |   | +------+
+     |   |   +-| _STA |         Method(_STA): the status control method
+     |   |     +------+
+     |   |
+     |   | +------+
+     |   +-| PCI0 |             Device(PCI0); the PCI root bridge
+     |     +------+
+     |       |
+     |       | +------+
+     |       +-| _HID |         Name(_HID, "PNP0A08"): the hardware ID
+     |       | +------+
+     |       |
+     |       | +------+
+     |       +-| _CID |         Name(_CID, "PNP0A03"): the compatible ID
+     |       | +------+
+     |       |
+     |       | +------+
+     |       +-| RP03 |         Scope(RP03): the PCI0 power scope
+     |       | +------+
+     |       |   |
+     |       |   | +------+
+     |       |   +-| PXP3 |     PowerResource(PXP3): the PCI0 power resource
+     |       |     +------+
+     |       |
+     |       | +------+
+     |       +-| GFX0 |         Device(GFX0): the graphics adapter
+     |         +------+
+     |           |
+     |           | +------+
+     |           +-| _ADR |     Name(_ADR, 0x00020000): the PCI bus address
+     |           | +------+
+     |           |
+     |           | +------+
+     |           +-| DD01 |     Device(DD01): the LCD output device
+     |             +------+
+     |               |
+     |               | +------+
+     |               +-| _BCL | Method(_BCL): the backlight control method
+     |                 +------+
+     |
+     | +------+
+     +-| _TZ  |                 Scope(_TZ): the thermal zone namespace
+     | +------+
+     |   |
+     |   | +------+
+     |   +-| FN00 |             PowerResource(FN00): the FAN0 power resource
+     |   | +------+
+     |   |
+     |   | +------+
+     |   +-| FAN0 |             Device(FAN0): the FAN0 cooling device
+     |   | +------+
+     |   |   |
+     |   |   | +------+
+     |   |   +-| _HID |         Name(_HID, "PNP0A0B"): the hardware ID
+     |   |     +------+
+     |   |
+     |   | +------+
+     |   +-| TZ00 |             ThermalZone(TZ00); the FAN thermal zone
+     |     +------+
+     |
+     | +------+
+     +-| _GPE |                 Scope(_GPE): the GPE namespace
+       +------+
+
+                     Figure 2. Example ACPI Namespace
+
+
+3. Linux ACPI Device Objects
+
+   The Linux kernel's core ACPI subsystem creates struct acpi_device
+   objects for ACPI namespace objects representing devices, power resources
+   processors, thermal zones.  Those objects are exported to user space via
+   sysfs as directories in the subtree under /sys/devices/LNXSYSTM:00.  The
+   format of their names is <bus_id:instance>, where 'bus_id' refers to the
+   ACPI namespace representation of the given object and 'instance' is used
+   for distinguishing different object of the same 'bus_id' (it is
+   two-digit decimal representation of an unsigned integer).
+
+   The value of 'bus_id' depends on the type of the object whose name it is
+   part of as listed in the table below.
+
+                +---+-----------------+-------+----------+
+                |   | Object/Feature  | Table | bus_id   |
+                +---+-----------------+-------+----------+
+                | N | Root            | xSDT  | LNXSYSTM |
+                +---+-----------------+-------+----------+
+                | N | Device          | xSDT  | _HID     |
+                +---+-----------------+-------+----------+
+                | N | Processor       | xSDT  | LNXCPU   |
+                +---+-----------------+-------+----------+
+                | N | ThermalZone     | xSDT  | LNXTHERM |
+                +---+-----------------+-------+----------+
+                | N | PowerResource   | xSDT  | LNXPOWER |
+                +---+-----------------+-------+----------+
+                | N | Other Devices   | xSDT  | device   |
+                +---+-----------------+-------+----------+
+                | F | PWR_BUTTON      | FADT  | LNXPWRBN |
+                +---+-----------------+-------+----------+
+                | F | SLP_BUTTON      | FADT  | LNXSLPBN |
+                +---+-----------------+-------+----------+
+                | M | Video Extension | xSDT  | LNXVIDEO |
+                +---+-----------------+-------+----------+
+                | M | ATA Controller  | xSDT  | LNXIOBAY |
+                +---+-----------------+-------+----------+
+                | M | Docking Station | xSDT  | LNXDOCK  |
+                +---+-----------------+-------+----------+
+
+                 Table 1. ACPI Namespace Objects Mapping
+
+   The following rules apply when creating struct acpi_device objects on
+   the basis of the contents of ACPI System Description Tables (as
+   indicated by the letter in the first column and the notation in the
+   second column of the table above):
+   N:
+      The object's source is an ACPI namespace node (as indicated by the
+      named object's type in the second column).  In that case the object's
+      directory in sysfs will contain the 'path' attribute whose value is
+      the full path to the node from the namespace root.
+   F:
+      The struct acpi_device object is created for a fixed hardware
+      feature (as indicated by the fixed feature flag's name in the second
+      column), so its sysfs directory will not contain the 'path'
+      attribute.
+   M:
+      The struct acpi_device object is created for an ACPI namespace node
+      with specific control methods (as indicated by the ACPI defined
+      device's type in the second column).  The 'path' attribute containing
+      its namespace path will be present in its sysfs directory.  For
+      example, if the _BCL method is present for an ACPI namespace node, a
+      struct acpi_device object with LNXVIDEO 'bus_id' will be created for
+      it.
+
+   The third column of the above table indicates which ACPI System
+   Description Tables contain information used for the creation of the
+   struct acpi_device objects represented by the given row (xSDT means DSDT
+   or SSDT).
+
+   The forth column of the above table indicates the 'bus_id' generation
+   rule of the struct acpi_device object:
+   _HID:
+      _HID in the last column of the table means that the object's bus_id
+      is derived from the _HID/_CID identification objects present under
+      the corresponding ACPI namespace node. The object's sysfs directory
+      will then contain the 'hid' and 'modalias' attributes that can be
+      used to retrieve the _HID and _CIDs of that object.
+   LNXxxxxx:
+      The 'modalias' attribute is also present for struct acpi_device
+      objects having bus_id of the "LNXxxxxx" form (pseudo devices), in
+      which cases it contains the bus_id string itself.
+   device:
+      'device' in the last column of the table indicates that the object's
+      bus_id cannot be determined from _HID/_CID of the corresponding
+      ACPI namespace node, although that object represents a device (for
+      example, it may be a PCI device with _ADR defined and without _HID
+      or _CID).  In that case the string 'device' will be used as the
+      object's bus_id.
+
+
+4. Linux ACPI Physical Device Glue
+
+   ACPI device (i.e. struct acpi_device) objects may be linked to other
+   objects in the Linux' device hierarchy that represent "physical" devices
+   (for example, devices on the PCI bus).  If that happens, it means that
+   the ACPI device object is a "companion" of a device otherwise
+   represented in a different way and is used (1) to provide configuration
+   information on that device which cannot be obtained by other means and
+   (2) to do specific things to the device with the help of its ACPI
+   control methods.  One ACPI device object may be linked this way to
+   multiple "physical" devices.
+
+   If an ACPI device object is linked to a "physical" device, its sysfs
+   directory contains the "physical_node" symbolic link to the sysfs
+   directory of the target device object.  In turn, the target device's
+   sysfs directory will then contain the "firmware_node" symbolic link to
+   the sysfs directory of the companion ACPI device object.
+   The linking mechanism relies on device identification provided by the
+   ACPI namespace.  For example, if there's an ACPI namespace object
+   representing a PCI device (i.e. a device object under an ACPI namespace
+   object representing a PCI bridge) whose _ADR returns 0x00020000 and the
+   bus number of the parent PCI bridge is 0, the sysfs directory
+   representing the struct acpi_device object created for that ACPI
+   namespace object will contain the 'physical_node' symbolic link to the
+   /sys/devices/pci0000:00/0000:00:02:0/ sysfs directory of the
+   corresponding PCI device.
+
+   The linking mechanism is generally bus-specific.  The core of its
+   implementation is located in the drivers/acpi/glue.c file, but there are
+   complementary parts depending on the bus types in question located
+   elsewhere.  For example, the PCI-specific part of it is located in
+   drivers/pci/pci-acpi.c.
+
+
+5. Example Linux ACPI Device Tree
+
+   The sysfs hierarchy of struct acpi_device objects corresponding to the
+   example ACPI namespace illustrated in Figure 2 with the addition of
+   fixed PWR_BUTTON/SLP_BUTTON devices is shown below.
+
+   +--------------+---+-----------------+
+   | LNXSYSTEM:00 | \ | acpi:LNXSYSTEM: |
+   +--------------+---+-----------------+
+     |
+     | +-------------+-----+----------------+
+     +-| LNXPWRBN:00 | N/A | acpi:LNXPWRBN: |
+     | +-------------+-----+----------------+
+     |
+     | +-------------+-----+----------------+
+     +-| LNXSLPBN:00 | N/A | acpi:LNXSLPBN: |
+     | +-------------+-----+----------------+
+     |
+     | +-----------+------------+--------------+
+     +-| LNXCPU:00 | \_PR_.CPU0 | acpi:LNXCPU: |
+     | +-----------+------------+--------------+
+     |
+     | +-------------+-------+----------------+
+     +-| LNXSYBUS:00 | \_SB_ | acpi:LNXSYBUS: |
+     | +-------------+-------+----------------+
+     |   |
+     |   | +- - - - - - - +- - - - - - +- - - - - - - -+
+     |   +-| PNP0C0D:00 | \_SB_.LID0 | acpi:PNP0C0D: |
+     |   | +- - - - - - - +- - - - - - +- - - - - - - -+
+     |   |
+     |   | +------------+------------+-----------------------+
+     |   +-| PNP0A08:00 | \_SB_.PCI0 | acpi:PNP0A08:PNP0A03: |
+     |     +------------+------------+-----------------------+
+     |       |
+     |       | +-----------+-----------------+-----+
+     |       +-| device:00 | \_SB_.PCI0.RP03 | N/A |
+     |       | +-----------+-----------------+-----+
+     |       |   |
+     |       |   | +-------------+----------------------+----------------+
+     |       |   +-| LNXPOWER:00 | \_SB_.PCI0.RP03.PXP3 | acpi:LNXPOWER: |
+     |       |     +-------------+----------------------+----------------+
+     |       |
+     |       | +-------------+-----------------+----------------+
+     |       +-| LNXVIDEO:00 | \_SB_.PCI0.GFX0 | acpi:LNXVIDEO: |
+     |         +-------------+-----------------+----------------+
+     |           |
+     |           | +-----------+-----------------+-----+
+     |           +-| device:01 | \_SB_.PCI0.DD01 | N/A |
+     |             +-----------+-----------------+-----+
+     |
+     | +-------------+-------+----------------+
+     +-| LNXSYBUS:01 | \_TZ_ | acpi:LNXSYBUS: |
+       +-------------+-------+----------------+
+         |
+         | +-------------+------------+----------------+
+         +-| LNXPOWER:0a | \_TZ_.FN00 | acpi:LNXPOWER: |
+         | +-------------+------------+----------------+
+         |
+         | +------------+------------+---------------+
+         +-| PNP0C0B:00 | \_TZ_.FAN0 | acpi:PNP0C0B: |
+         | +------------+------------+---------------+
+         |
+         | +-------------+------------+----------------+
+         +-| LNXTHERM:00 | \_TZ_.TZ00 | acpi:LNXTHERM: |
+           +-------------+------------+----------------+
+
+                  Figure 3. Example Linux ACPI Device Tree
+
+   NOTE: Each node is represented as "object/path/modalias", where:
+         1. 'object' is the name of the object's directory in sysfs.
+         2. 'path' is the ACPI namespace path of the corresponding
+            ACPI namespace object, as returned by the object's 'path'
+            sysfs attribute.
+         3. 'modalias' is the value of the object's 'modalias' sysfs
+            attribute (as described earlier in this document).
+   NOTE: N/A indicates the device object does not have the 'path' or the
+         'modalias' attribute.
diff --git a/Documentation/acpi/scan_handlers.txt b/Documentation/acpi/scan_handlers.txt
new file mode 100644
index 000000000..3246ccf15
--- /dev/null
+++ b/Documentation/acpi/scan_handlers.txt
@@ -0,0 +1,77 @@
+ACPI Scan Handlers
+
+Copyright (C) 2012, Intel Corporation
+Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+
+During system initialization and ACPI-based device hot-add, the ACPI namespace
+is scanned in search of device objects that generally represent various pieces
+of hardware.  This causes a struct acpi_device object to be created and
+registered with the driver core for every device object in the ACPI namespace
+and the hierarchy of those struct acpi_device objects reflects the namespace
+layout (i.e. parent device objects in the namespace are represented by parent
+struct acpi_device objects and analogously for their children).  Those struct
+acpi_device objects are referred to as "device nodes" in what follows, but they
+should not be confused with struct device_node objects used by the Device Trees
+parsing code (although their role is analogous to the role of those objects).
+
+During ACPI-based device hot-remove device nodes representing pieces of hardware
+being removed are unregistered and deleted.
+
+The core ACPI namespace scanning code in drivers/acpi/scan.c carries out basic
+initialization of device nodes, such as retrieving common configuration
+information from the device objects represented by them and populating them with
+appropriate data, but some of them require additional handling after they have
+been registered.  For example, if the given device node represents a PCI host
+bridge, its registration should cause the PCI bus under that bridge to be
+enumerated and PCI devices on that bus to be registered with the driver core.
+Similarly, if the device node represents a PCI interrupt link, it is necessary
+to configure that link so that the kernel can use it.
+
+Those additional configuration tasks usually depend on the type of the hardware
+component represented by the given device node which can be determined on the
+basis of the device node's hardware ID (HID).  They are performed by objects
+called ACPI scan handlers represented by the following structure:
+
+struct acpi_scan_handler {
+	const struct acpi_device_id *ids;
+	struct list_head list_node;
+	int (*attach)(struct acpi_device *dev, const struct acpi_device_id *id);
+	void (*detach)(struct acpi_device *dev);
+};
+
+where ids is the list of IDs of device nodes the given handler is supposed to
+take care of, list_node is the hook to the global list of ACPI scan handlers
+maintained by the ACPI core and the .attach() and .detach() callbacks are
+executed, respectively, after registration of new device nodes and before
+unregistration of device nodes the handler attached to previously.
+
+The namespace scanning function, acpi_bus_scan(), first registers all of the
+device nodes in the given namespace scope with the driver core.  Then, it tries
+to match a scan handler against each of them using the ids arrays of the
+available scan handlers.  If a matching scan handler is found, its .attach()
+callback is executed for the given device node.  If that callback returns 1,
+that means that the handler has claimed the device node and is now responsible
+for carrying out any additional configuration tasks related to it.  It also will
+be responsible for preparing the device node for unregistration in that case.
+The device node's handler field is then populated with the address of the scan
+handler that has claimed it.
+
+If the .attach() callback returns 0, it means that the device node is not
+interesting to the given scan handler and may be matched against the next scan
+handler in the list.  If it returns a (negative) error code, that means that
+the namespace scan should be terminated due to a serious error.  The error code
+returned should then reflect the type of the error.
+
+The namespace trimming function, acpi_bus_trim(), first executes .detach()
+callbacks from the scan handlers of all device nodes in the given namespace
+scope (if they have scan handlers).  Next, it unregisters all of the device
+nodes in that scope.
+
+ACPI scan handlers can be added to the list maintained by the ACPI core with the
+help of the acpi_scan_add_handler() function taking a pointer to the new scan
+handler as an argument.  The order in which scan handlers are added to the list
+is the order in which they are matched against device nodes during namespace
+scans.
+
+All scan handles must be added to the list before acpi_bus_scan() is run for the
+first time and they cannot be removed from it.
diff --git a/Documentation/acpi/video_extension.txt b/Documentation/acpi/video_extension.txt
new file mode 100644
index 000000000..78b32ac02
--- /dev/null
+++ b/Documentation/acpi/video_extension.txt
@@ -0,0 +1,106 @@
+ACPI video extensions
+~~~~~~~~~~~~~~~~~~~~~
+
+This driver implement the ACPI Extensions For Display Adapters for
+integrated graphics devices on motherboard, as specified in ACPI 2.0
+Specification, Appendix B, allowing to perform some basic control like
+defining the video POST device, retrieving EDID information or to
+setup a video output, etc.  Note that this is an ref. implementation
+only.  It may or may not work for your integrated video device.
+
+The ACPI video driver does 3 things regarding backlight control:
+
+1 Export a sysfs interface for user space to control backlight level
+
+If the ACPI table has a video device, and acpi_backlight=vendor kernel
+command line is not present, the driver will register a backlight device
+and set the required backlight operation structure for it for the sysfs
+interface control. For every registered class device, there will be a
+directory named acpi_videoX under /sys/class/backlight.
+
+The backlight sysfs interface has a standard definition here:
+Documentation/ABI/stable/sysfs-class-backlight.
+
+And what ACPI video driver does is:
+actual_brightness: on read, control method _BQC will be evaluated to
+get the brightness level the firmware thinks it is at;
+bl_power: not implemented, will set the current brightness instead;
+brightness: on write, control method _BCM will run to set the requested
+brightness level;
+max_brightness: Derived from the _BCL package(see below);
+type: firmware
+
+Note that ACPI video backlight driver will always use index for
+brightness, actual_brightness and max_brightness. So if we have
+the following _BCL package:
+
+Method (_BCL, 0, NotSerialized)
+{
+	Return (Package (0x0C)
+	{
+		0x64,
+		0x32,
+		0x0A,
+		0x14,
+		0x1E,
+		0x28,
+		0x32,
+		0x3C,
+		0x46,
+		0x50,
+		0x5A,
+		0x64
+	})
+}
+
+The first two levels are for when laptop are on AC or on battery and are
+not used by Linux currently. The remaining 10 levels are supported levels
+that we can choose from. The applicable index values are from 0 (that
+corresponds to the 0x0A brightness value) to 9 (that corresponds to the
+0x64 brightness value) inclusive. Each of those index values is regarded
+as a "brightness level" indicator. Thus from the user space perspective
+the range of available brightness levels is from 0 to 9 (max_brightness)
+inclusive.
+
+2 Notify user space about hotkey event
+
+There are generally two cases for hotkey event reporting:
+i) For some laptops, when user presses the hotkey, a scancode will be
+   generated and sent to user space through the input device created by
+   the keyboard driver as a key type input event, with proper remap, the
+   following key code will appear to user space:
+
+	EV_KEY, KEY_BRIGHTNESSUP
+	EV_KEY, KEY_BRIGHTNESSDOWN
+	etc.
+
+For this case, ACPI video driver does not need to do anything(actually,
+it doesn't even know this happened).
+
+ii) For some laptops, the press of the hotkey will not generate the
+    scancode, instead, firmware will notify the video device ACPI node
+    about the event. The event value is defined in the ACPI spec. ACPI
+    video driver will generate an key type input event according to the
+    notify value it received and send the event to user space through the
+    input device it created:
+
+	event		keycode
+	0x86		KEY_BRIGHTNESSUP
+	0x87		KEY_BRIGHTNESSDOWN
+	etc.
+
+so this would lead to the same effect as case i) now.
+
+Once user space tool receives this event, it can modify the backlight
+level through the sysfs interface.
+
+3 Change backlight level in the kernel
+
+This works for machines covered by case ii) in Section 2. Once the driver
+received a notification, it will set the backlight level accordingly. This does
+not affect the sending of event to user space, they are always sent to user
+space regardless of whether or not the video module controls the backlight level
+directly. This behaviour can be controlled through the brightness_switch_enabled
+module parameter as documented in kernel-parameters.txt. It is recommended to
+disable this behaviour once a GUI environment starts up and wants to have full
+control of the backlight level.