Linux-libre 4.3.2-gnu

4 files changed, 99 insertions, 1 deletions

diff --git a/Documentation/arm/Atmel/README b/Documentation/arm/Atmel/README
index c53a19b4a..0931cf7e2 100644
--- a/Documentation/arm/Atmel/README
+++ b/Documentation/arm/Atmel/README
@@ -90,6 +90,11 @@ the Atmel website: http://www.atmel.com.
         + Datasheet
           http://www.atmel.com/Images/Atmel-11238-32-bit-Cortex-A5-Microcontroller-SAMA5D4_Datasheet.pdf
 
+      - sama5d2 family
+        - sama5d27
+        + Datasheet
+          Coming soon
+
 
 Linux kernel information
 ------------------------
diff --git a/Documentation/arm/OMAP/README b/Documentation/arm/OMAP/README
new file mode 100644
index 000000000..75645c45d
--- /dev/null
+++ b/Documentation/arm/OMAP/README
@@ -0,0 +1,7 @@
+This file contains documentation for running mainline
+kernel on omaps.
+
+KERNEL		NEW DEPENDENCIES
+v4.3+		Update is needed for custom .config files to make sure
+		CONFIG_REGULATOR_PBIAS is enabled for MMC1 to work
+		properly.
diff --git a/Documentation/arm/Samsung/Bootloader-interface.txt b/Documentation/arm/Samsung/Bootloader-interface.txt
index b96ead9a6..df8d4fb85 100644
--- a/Documentation/arm/Samsung/Bootloader-interface.txt
+++ b/Documentation/arm/Samsung/Bootloader-interface.txt
@@ -15,6 +15,7 @@ executing kernel.
 
 
 1. Non-Secure mode
+
 Address:      sysram_ns_base_addr
 Offset        Value                                        Purpose
 =============================================================================
@@ -28,6 +29,7 @@ Offset        Value                                        Purpose
 
 
 2. Secure mode
+
 Address:      sysram_base_addr
 Offset        Value                                        Purpose
 =============================================================================
@@ -40,14 +42,25 @@ Offset        Value                                        Purpose
 Address:      pmu_base_addr
 Offset        Value                                        Purpose
 =============================================================================
-0x0800        exynos_cpu_resume                            AFTR
+0x0800        exynos_cpu_resume                            AFTR, suspend
+0x0800        mcpm_entry_point (Exynos542x with MCPM)      AFTR, suspend
+0x0804        0xfcba0d10 (Magic cookie)                    AFTR
+0x0804        0x00000bad (Magic cookie)                    System suspend
 0x0814        exynos4_secondary_startup (Exynos4210 r1.1)  Secondary CPU boot
 0x0818        0xfcba0d10 (Magic cookie, Exynos4210 r1.1)   AFTR
 0x081C        exynos_cpu_resume (Exynos4210 r1.1)          AFTR
 
 
 3. Other (regardless of secure/non-secure mode)
+
 Address:      pmu_base_addr
 Offset        Value                           Purpose
 =============================================================================
 0x0908        Non-zero (only Exynos3250)      Secondary CPU boot up indicator
+
+
+4. Glossary
+
+AFTR - ARM Off Top Running, a low power mode, Cortex cores and many other
+modules are power gated, except the TOP modules
+MCPM - Multi-Cluster Power Management
diff --git a/Documentation/arm/keystone/Overview.txt b/Documentation/arm/keystone/Overview.txt
new file mode 100644
index 000000000..f17bc4c9d
--- /dev/null
+++ b/Documentation/arm/keystone/Overview.txt
@@ -0,0 +1,73 @@
+		TI Keystone Linux Overview
+		--------------------------
+
+Introduction
+------------
+Keystone range of SoCs are based on ARM Cortex-A15 MPCore Processors
+and c66x DSP cores. This document describes essential information required
+for users to run Linux on Keystone based EVMs from Texas Instruments.
+
+Following SoCs  & EVMs are currently supported:-
+
+------------ K2HK SoC and EVM --------------------------------------------------
+
+a.k.a Keystone 2 Hawking/Kepler SoC
+TCI6636K2H & TCI6636K2K: See documentation at
+	http://www.ti.com/product/tci6638k2k
+	http://www.ti.com/product/tci6638k2h
+
+EVM:
+http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
+
+------------ K2E SoC and EVM ---------------------------------------------------
+
+a.k.a Keystone 2 Edison SoC
+K2E  -  66AK2E05: See documentation at
+	http://www.ti.com/product/66AK2E05/technicaldocuments
+
+EVM:
+https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
+
+------------ K2L SoC and EVM ---------------------------------------------------
+
+a.k.a Keystone 2 Lamarr SoC
+K2L  -  TCI6630K2L: See documentation at
+	http://www.ti.com/product/TCI6630K2L/technicaldocuments
+EVM:
+https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html
+
+Configuration
+-------------
+
+All of the K2 SoCs/EVMs share a common defconfig, keystone_defconfig and same
+image is used to boot on individual EVMs. The platform configuration is
+specified through DTS. Following are the DTS used:-
+	K2HK EVM : k2hk-evm.dts
+	K2E EVM  : k2e-evm.dts
+	K2L EVM  : k2l-evm.dts
+
+The device tree documentation for the keystone machines are located at
+        Documentation/devicetree/bindings/arm/keystone/keystone.txt
+
+Known issues & workaround
+-------------------------
+
+Some of the device drivers used on keystone are re-used from that from
+DaVinci and other TI SoCs. These device drivers may use clock APIs directly.
+Some of the keystone specific drivers such as netcp uses run time power
+management API instead to enable clock. As this API has limitations on
+keystone, following workaround is needed to boot Linux.
+
+   Add 'clk_ignore_unused' to the bootargs env variable in u-boot. Otherwise
+   clock frameworks will try to disable clocks that are unused and disable
+   the hardware. This is because netcp related power domain and clock
+   domains are enabled in u-boot as run time power management API currently
+   doesn't enable clocks for netcp due to a limitation. This workaround is
+   expected to be removed in the future when proper API support becomes
+   available. Until then, this work around is needed.
+
+
+Document Author
+---------------
+Murali Karicheri <m-karicheri2@ti.com>
+Copyright 2015 Texas Instruments