Linux-libre 4.5-gnu

2 files changed, 0 insertions, 46 deletions

diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt b/Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt
deleted file mode 100644
index 6b42fda30..000000000
--- a/Documentation/devicetree/bindings/arm/rockchip/pmu-sram.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Rockchip SRAM for pmu:
-------------------------------
-
-The sram of pmu is used to store the function of resume from maskrom(the 1st
-level loader). This is a common use of the "pmu-sram" because it keeps power
-even in low power states in the system.
-
-Required node properties:
-- compatible : should be "rockchip,rk3288-pmu-sram"
-- reg : physical base address and the size of the registers window
-
-Example:
-	sram@ff720000 {
-		compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
-		reg = <0xff720000 0x1000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt b/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
deleted file mode 100644
index d9416fb8d..000000000
--- a/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Rockchip SRAM for smp bringup:
-------------------------------
-
-Rockchip's smp-capable SoCs use the first part of the sram for the bringup
-of the cores. Once the core gets powered up it executes the code that is
-residing at the very beginning of the sram.
-
-Therefore a reserved section sub-node has to be added to the mmio-sram
-declaration.
-
-Required sub-node properties:
-- compatible : should be "rockchip,rk3066-smp-sram"
-
-The rest of the properties should follow the generic mmio-sram discription
-found in ../../misc/sram.txt
-
-Example:
-
-	sram: sram@10080000 {
-		compatible = "mmio-sram";
-		reg = <0x10080000 0x10000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		smp-sram@10080000 {
-			compatible = "rockchip,rk3066-smp-sram";
-			reg = <0x10080000 0x50>;
-		};
-	};