Linux-libre 4.3.2-gnu

15 files changed, 175 insertions, 12 deletions

diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 424ac8cbf..7fd64ec9e 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -27,6 +27,8 @@ compatible: must be one of:
     o "atmel,at91sam9xe"
  * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
    SoC family:
+    o "atmel,sama5d2" shall be extended with the specific SoC compatible:
+       - "atmel,sama5d27"
     o "atmel,sama5d3" shall be extended with the specific SoC compatible:
        - "atmel,sama5d31"
        - "atmel,sama5d33"
@@ -50,6 +52,7 @@ System Timer (ST) required properties:
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt for the ST which is the IRQ line
   shared across all System Controller members.
+- clocks: phandle to input clock.
 Its subnodes can be:
 - watchdog: compatible should be "atmel,at91rm9200-wdt"
 
@@ -61,7 +64,7 @@ TC/TCLIB Timer required properties:
   Note that you can specify several interrupt cells if the TC
   block has one interrupt per channel.
 - clock-names: tuple listing input clock names.
-	Required elements: "t0_clk"
+	Required elements: "t0_clk", "slow_clk"
 	Optional elements: "t1_clk", "t2_clk"
 - clocks: phandles to input clocks.
 
@@ -87,14 +90,16 @@ One interrupt per TC channel in a TC block:
 
 RSTC Reset Controller required properties:
 - compatible: Should be "atmel,<chip>-rstc".
-  <chip> can be "at91sam9260" or "at91sam9g45"
+  <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
 - reg: Should contain registers location and length
+- clocks: phandle to input clock.
 
 Example:
 
 	rstc@fffffd00 {
 		compatible = "atmel,at91sam9260-rstc";
 		reg = <0xfffffd00 0x10>;
+		clocks = <&clk32k>;
 	};
 
 RAMC SDRAM/DDR Controller required properties:
@@ -117,6 +122,7 @@ required properties:
 - compatible: Should be "atmel,<chip>-shdwc".
   <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
 - reg: Should contain registers location and length
+- clocks: phandle to input clock.
 
 optional properties:
 - atmel,wakeup-mode: String, operation mode of the wakeup mode.
@@ -135,9 +141,10 @@ optional at91sam9x5 properties:
 
 Example:
 
-	rstc@fffffd00 {
-		compatible = "atmel,at91sam9260-rstc";
-		reg = <0xfffffd00 0x10>;
+	shdwc@fffffd10 {
+		compatible = "atmel,at91sam9260-shdwc";
+		reg = <0xfffffd10 0x10>;
+		clocks = <&clk32k>;
 	};
 
 Special Function Registers (SFR)
diff --git a/Documentation/devicetree/bindings/arm/bcm/ns2.txt b/Documentation/devicetree/bindings/arm/bcm/ns2.txt
new file mode 100644
index 000000000..35f056f4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/ns2.txt
@@ -0,0 +1,9 @@
+Broadcom North Star 2 (NS2) device tree bindings
+------------------------------------------------
+
+Boards with NS2 shall have the following properties:
+
+Required root node property:
+
+NS2 SVK board
+compatible = "brcm,ns2-svk", "brcm,ns2";
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
new file mode 100644
index 000000000..6824b3180
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
@@ -0,0 +1,14 @@
+Raspberry Pi VideoCore firmware driver
+
+Required properties:
+
+- compatible:		Should be "raspberrypi,bcm2835-firmware"
+- mboxes:		Phandle to the firmware device's Mailbox.
+			  (See: ../mailbox/mailbox.txt for more information)
+
+Example:
+
+firmware {
+	compatible = "raspberrypi,bcm2835-firmware";
+	mboxes = <&mailbox>;
+};
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index 65a6db227..62938eb96 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -17,6 +17,7 @@ its hardware characteristcs.
 		- "arm,coresight-tmc", "arm,primecell";
 		- "arm,coresight-funnel", "arm,primecell";
 		- "arm,coresight-etm3x", "arm,primecell";
+		- "arm,coresight-etm4x", "arm,primecell";
 		- "qcom,coresight-replicator1x", "arm,primecell";
 
 	* reg: physical base address and length of the register
diff --git a/Documentation/devicetree/bindings/arm/gic-v3.txt b/Documentation/devicetree/bindings/arm/gic-v3.txt
index ddfade40a..7803e77d8 100644
--- a/Documentation/devicetree/bindings/arm/gic-v3.txt
+++ b/Documentation/devicetree/bindings/arm/gic-v3.txt
@@ -57,6 +57,8 @@ used to route Message Signalled Interrupts (MSI) to the CPUs.
 These nodes must have the following properties:
 - compatible : Should at least contain  "arm,gic-v3-its".
 - msi-controller : Boolean property. Identifies the node as an MSI controller
+- #msi-cells: Must be <1>. The single msi-cell is the DeviceID of the device
+  which will generate the MSI.
 - reg: Specifies the base physical address and size of the ITS
   registers.
 
@@ -83,6 +85,7 @@ Examples:
 		gic-its@2c200000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
+			#msi-cells = <1>;
 			reg = <0x0 0x2c200000 0 0x200000>;
 		};
 	};
@@ -107,12 +110,14 @@ Examples:
 		gic-its@2c200000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
+			#msi-cells = <1>;
 			reg = <0x0 0x2c200000 0 0x200000>;
 		};
 
 		gic-its@2c400000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;
+			#msi-cells = <1>;
 			reg = <0x0 0x2c400000 0 0x200000>;
 		};
 	};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index c431c6752..c733e28e1 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -127,6 +127,24 @@ Example:
 		#clock-cells = <1>;
 	};
 
+
+Hisilicon Hi6220 SRAM controller
+
+Required properties:
+- compatible : "hisilicon,hi6220-sramctrl", "syscon"
+- reg : Register address and size
+
+Hisilicon's SoCs use sram for multiple purpose; on Hi6220 there have several
+SRAM banks for power management, modem, security, etc. Further, use "syscon"
+managing the common sram which can be shared by multiple modules.
+
+Example:
+	/*for Hi6220*/
+	sram: sram@fff80000 {
+		compatible = "hisilicon,hi6220-sramctrl", "syscon";
+		reg = <0x0 0xfff80000 0x0 0x12000>;
+	};
+
 -----------------------------------------------------------------------
 Hisilicon HiP01 system controller
 
diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt
index a8274eaba..b8e41c148 100644
--- a/Documentation/devicetree/bindings/arm/idle-states.txt
+++ b/Documentation/devicetree/bindings/arm/idle-states.txt
@@ -497,7 +497,7 @@ cpus {
 	};
 
 	idle-states {
-		entry-method = "arm,psci";
+		entry-method = "psci";
 
 		CPU_RETENTION_0_0: cpu-retention-0-0 {
 			compatible = "arm,idle-state";
diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
index 2251dccb1..06c88a4d2 100644
--- a/Documentation/devicetree/bindings/arm/l2cc.txt
+++ b/Documentation/devicetree/bindings/arm/l2cc.txt
@@ -67,6 +67,12 @@ Optional properties:
   disable if zero.
 - arm,prefetch-offset : Override prefetch offset value. Valid values are
   0-7, 15, 23, and 31.
+- arm,shared-override : The default behavior of the pl310 cache controller with
+  respect to the shareable attribute is to transform "normal memory
+  non-cacheable transactions" into "cacheable no allocate" (for reads) or
+  "write through no write allocate" (for writes).
+  On systems where this may cause DMA buffer corruption, this property must be
+  specified to indicate that such transforms are precluded.
 - prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1>
   (forcibly enable), property absent (retain settings set by firmware)
 - prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable),
diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
index 4f40ff3fe..5171ad8f4 100644
--- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt
@@ -20,6 +20,8 @@ And in addition, the compatible shall be extended with the specific
 board. Currently known boards are:
 
 "buffalo,lschlv2"
+"buffalo,lswvl"
+"buffalo,lswxl"
 "buffalo,lsxhl"
 "buffalo,lsxl"
 "dlink,dns-320"
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index dd7550a29..618a91994 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -1,12 +1,15 @@
-MediaTek mt65xx & mt81xx Platforms Device Tree Bindings
+MediaTek mt65xx, mt67xx & mt81xx Platforms Device Tree Bindings
 
-Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property:
+Boards with a MediaTek mt65xx/mt67xx/mt81xx SoC shall have the
+following property:
 
 Required root node property:
 
 compatible: Must contain one of
+   "mediatek,mt6580"
    "mediatek,mt6589"
    "mediatek,mt6592"
+   "mediatek,mt6795"
    "mediatek,mt8127"
    "mediatek,mt8135"
    "mediatek,mt8173"
@@ -14,12 +17,18 @@ compatible: Must contain one of
 
 Supported boards:
 
+- Evaluation board for MT6580:
+    Required root node properties:
+      - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
 - bq Aquaris5 smart phone:
     Required root node properties:
       - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
 - Evaluation board for MT6592:
     Required root node properties:
       - compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
+- Evaluation board for MT6795(Helio X10):
+    Required root node properties:
+      - compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
 - MTK mt8127 tablet moose EVB:
     Required root node properties:
       - compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
index 4f5a5352c..afef6a85a 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt
@@ -1,4 +1,4 @@
-Mediatek 65xx/81xx sysirq
++Mediatek 65xx/67xx/81xx sysirq
 
 Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI
 interrupt.
@@ -8,9 +8,11 @@ Required properties:
 	"mediatek,mt8173-sysirq"
 	"mediatek,mt8135-sysirq"
 	"mediatek,mt8127-sysirq"
+	"mediatek,mt6795-sysirq"
 	"mediatek,mt6592-sysirq"
 	"mediatek,mt6589-sysirq"
 	"mediatek,mt6582-sysirq"
+	"mediatek,mt6580-sysirq"
 	"mediatek,mt6577-sysirq"
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Use the same format as specified by GIC in
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 4f6a82cef..9f4e5136e 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -135,6 +135,9 @@ Boards:
 - AM335X OrionLXm : Substation Automation Platform
   compatible = "novatech,am335x-lxm", "ti,am33xx"
 
+- AM335X phyBOARD-WEGA: Single Board Computer dev kit
+  compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"
+
 - OMAP5 EVM : Evaluation Module
   compatible = "ti,omap5-evm", "ti,omap5"
 
diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt
index 3b5f5d108..435251fa9 100644
--- a/Documentation/devicetree/bindings/arm/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/pmu.txt
@@ -26,13 +26,19 @@ Required properties:
 
 Optional properties:
 
-- interrupt-affinity : Valid only when using SPIs, specifies a list of phandles
-                       to CPU nodes corresponding directly to the affinity of
+- interrupt-affinity : When using SPIs, specifies a list of phandles to CPU
+                       nodes corresponding directly to the affinity of
 		       the SPIs listed in the interrupts property.
 
-		       This property should be present when there is more than
+                       When using a PPI, specifies a list of phandles to CPU
+		       nodes corresponding to the set of CPUs which have
+		       a PMU of this type signalling the PPI listed in the
+		       interrupts property.
+
+                       This property should be present when there is more than
 		       a single SPI.
 
+
 - qcom,no-pc-write : Indicates that this PMU doesn't support the 0xc and 0xd
                      events.
 
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 60d4a1e0a..af58cd74a 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -26,3 +26,38 @@ Rockchip platforms device tree bindings
 - ChipSPARK PopMetal-RK3288 board:
     Required root node properties:
       - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
+
+- Netxeon R89 board:
+    Required root node properties:
+      - compatible = "netxeon,r89", "rockchip,rk3288";
+
+- Google Jerry (Hisense Chromebook C11 and more):
+    Required root node properties:
+      - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
+		     "google,veyron-jerry-rev5", "google,veyron-jerry-rev4",
+		     "google,veyron-jerry-rev3", "google,veyron-jerry",
+		     "google,veyron", "rockchip,rk3288";
+
+- Google Minnie (Asus Chromebook Flip C100P):
+    Required root node properties:
+      - compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
+		     "google,veyron-minnie-rev2", "google,veyron-minnie-rev1",
+		     "google,veyron-minnie-rev0", "google,veyron-minnie",
+		     "google,veyron", "rockchip,rk3288";
+
+- Google Pinky (dev-board):
+    Required root node properties:
+      - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky",
+		     "google,veyron", "rockchip,rk3288";
+
+- Google Speedy (Asus C201 Chromebook):
+    Required root node properties:
+      - compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8",
+		     "google,veyron-speedy-rev7", "google,veyron-speedy-rev6",
+		     "google,veyron-speedy-rev5", "google,veyron-speedy-rev4",
+		     "google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
+		     "google,veyron-speedy", "google,veyron", "rockchip,rk3288";
+
+- Rockchip R88 board:
+    Required root node properties:
+      - compatible = "rockchip,r88", "rockchip,rk3368";
diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt
new file mode 100644
index 000000000..6808fb5de
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sp810.txt
@@ -0,0 +1,46 @@
+SP810 System Controller
+-----------------------
+
+Required properties:
+
+- compatible:	standard compatible string for a Primecell peripheral,
+		see Documentation/devicetree/bindings/arm/primecell.txt
+		for more details
+		should be: "arm,sp810", "arm,primecell"
+
+- reg:		standard registers property, physical address and size
+		of the control registers
+
+- clock-names:	from the common clock bindings, for more details see
+		Documentation/devicetree/bindings/clock/clock-bindings.txt;
+		should be: "refclk", "timclk", "apb_pclk"
+
+- clocks:	from the common clock bindings, phandle and clock
+		specifier pairs for the entries of clock-names property
+
+- #clock-cells: from the common clock bindings;
+		should be: <1>
+
+- clock-output-names: from the common clock bindings;
+		should be: "timerclken0", "timerclken1", "timerclken2", "timerclken3"
+
+- assigned-clocks: from the common clock binding;
+		should be: clock specifier for each output clock of this
+		provider node
+
+- assigned-clock-parents: from the common clock binding;
+		should be: phandle of input clock listed in clocks
+		property with the highest frequency
+
+Example:
+	v2m_sysctl: sysctl@020000 {
+		compatible = "arm,sp810", "arm,primecell";
+		reg = <0x020000 0x1000>;
+		clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+		clock-names = "refclk", "timclk", "apb_pclk";
+		#clock-cells = <1>;
+		clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+		assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+		assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+
+	};