Initial import

1 files changed, 204 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
new file mode 100644
index 000000000..4fa11af3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -0,0 +1,204 @@
+Device Tree Clock bindings for arch-sunxi
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"allwinner,sun4i-a10-osc-clk" - for a gatable oscillator
+	"allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4
+	"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
+	"allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23
+	"allwinner,sun9i-a80-pll4-clk" - for the peripheral PLLs on A80
+	"allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
+	"allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
+	"allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
+	"allwinner,sun9i-a80-gt-clk" - for the GT bus clock on A80
+	"allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock
+	"allwinner,sun4i-a10-axi-clk" - for the AXI clock
+	"allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23
+	"allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates
+	"allwinner,sun4i-a10-ahb-clk" - for the AHB clock
+	"allwinner,sun5i-a13-ahb-clk" - for the AHB clock on A13
+	"allwinner,sun9i-a80-ahb-clk" - for the AHB bus clocks on A80
+	"allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10
+	"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
+	"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
+	"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
+	"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
+	"allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31
+	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
+	"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
+	"allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80
+	"allwinner,sun9i-a80-ahb1-gates-clk" - for the AHB1 gates on A80
+	"allwinner,sun9i-a80-ahb2-gates-clk" - for the AHB2 gates on A80
+	"allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
+	"allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
+	"allwinner,sun8i-a23-apb0-clk" - for the APB0 clock on A23
+	"allwinner,sun9i-a80-apb0-clk" - for the APB0 bus clock on A80
+	"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
+	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
+	"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
+	"allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31
+	"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
+	"allwinner,sun8i-a23-apb0-gates-clk" - for the APB0 gates on A23
+	"allwinner,sun9i-a80-apb0-gates-clk" - for the APB0 gates on A80
+	"allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
+	"allwinner,sun9i-a80-apb1-clk" - for the APB1 bus clock on A80
+	"allwinner,sun4i-a10-apb1-gates-clk" - for the APB1 gates on A10
+	"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
+	"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
+	"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
+	"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
+	"allwinner,sun8i-a23-apb1-gates-clk" - for the APB1 gates on A23
+	"allwinner,sun9i-a80-apb1-gates-clk" - for the APB1 gates on A80
+	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
+	"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
+	"allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13
+	"allwinner,sun4i-a10-mmc-clk" - for the MMC clock
+	"allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80
+	"allwinner,sun9i-a80-mmc-config-clk" - for mmc gates + resets on A80
+	"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
+	"allwinner,sun9i-a80-mod0-clk" - for module 0 (storage) clocks on A80
+	"allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23
+	"allwinner,sun7i-a20-out-clk" - for the external output clocks
+	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
+	"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
+	"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
+	"allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
+	"allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
+	"allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
+
+Required properties for all clocks:
+- reg : shall be the control register address for the clock.
+- clocks : shall be the input parent clock(s) phandle for the clock. For
+	multiplexed clocks, the list order must match the hardware
+	programming order.
+- #clock-cells : from common clock binding; shall be set to 0 except for
+	the following compatibles where it shall be set to 1:
+	"allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk",
+	"allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk",
+	"allwinner,*-usb-clk", "allwinner,*-mmc-clk",
+	"allwinner,*-mmc-config-clk"
+- clock-output-names : shall be the corresponding names of the outputs.
+	If the clock module only has one output, the name shall be the
+	module name.
+
+And "allwinner,*-usb-clk" clocks also require:
+- reset-cells : shall be set to 1
+
+The "allwinner,sun9i-a80-mmc-config-clk" clock also requires:
+- #reset-cells : shall be set to 1
+- resets : shall be the reset control phandle for the mmc block.
+
+For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate
+dummy clocks at 25 MHz and 125 MHz, respectively. See example.
+
+Clock consumers should specify the desired clocks they use with a
+"clocks" phandle cell. Consumers that are using a gated clock should
+provide an additional ID in their clock property. This ID is the
+offset of the bit controlling this particular gate in the register.
+For the other clocks with "#clock-cells" = 1, the additional ID shall
+refer to the index of the output.
+
+For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output
+is the normal PLL6 output, or "pll6". The second output is rate doubled
+PLL6, or "pll6x2".
+
+The "allwinner,*-mmc-clk" clocks have three different outputs: the
+main clock, with the ID 0, and the output and sample clocks, with the
+IDs 1 and 2, respectively.
+
+The "allwinner,sun9i-a80-mmc-config-clk" clock has one clock/reset output
+per mmc controller. The number of outputs is determined by the size of
+the address block, which is related to the overall mmc block.
+
+For example:
+
+osc24M: clk@01c20050 {
+	#clock-cells = <0>;
+	compatible = "allwinner,sun4i-a10-osc-clk";
+	reg = <0x01c20050 0x4>;
+	clocks = <&osc24M_fixed>;
+	clock-output-names = "osc24M";
+};
+
+pll1: clk@01c20000 {
+	#clock-cells = <0>;
+	compatible = "allwinner,sun4i-a10-pll1-clk";
+	reg = <0x01c20000 0x4>;
+	clocks = <&osc24M>;
+	clock-output-names = "pll1";
+};
+
+pll5: clk@01c20020 {
+	#clock-cells = <1>;
+	compatible = "allwinner,sun4i-pll5-clk";
+	reg = <0x01c20020 0x4>;
+	clocks = <&osc24M>;
+	clock-output-names = "pll5_ddr", "pll5_other";
+};
+
+pll6: clk@01c20028 {
+	#clock-cells = <1>;
+	compatible = "allwinner,sun6i-a31-pll6-clk";
+	reg = <0x01c20028 0x4>;
+	clocks = <&osc24M>;
+	clock-output-names = "pll6", "pll6x2";
+};
+
+cpu: cpu@01c20054 {
+	#clock-cells = <0>;
+	compatible = "allwinner,sun4i-a10-cpu-clk";
+	reg = <0x01c20054 0x4>;
+	clocks = <&osc32k>, <&osc24M>, <&pll1>;
+	clock-output-names = "cpu";
+};
+
+mmc0_clk: clk@01c20088 {
+	#clock-cells = <1>;
+	compatible = "allwinner,sun4i-a10-mmc-clk";
+	reg = <0x01c20088 0x4>;
+	clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+	clock-output-names = "mmc0", "mmc0_output", "mmc0_sample";
+};
+
+mii_phy_tx_clk: clk@2 {
+	#clock-cells = <0>;
+	compatible = "fixed-clock";
+	clock-frequency = <25000000>;
+	clock-output-names = "mii_phy_tx";
+};
+
+gmac_int_tx_clk: clk@3 {
+	#clock-cells = <0>;
+	compatible = "fixed-clock";
+	clock-frequency = <125000000>;
+	clock-output-names = "gmac_int_tx";
+};
+
+gmac_clk: clk@01c20164 {
+	#clock-cells = <0>;
+	compatible = "allwinner,sun7i-a20-gmac-clk";
+	reg = <0x01c20164 0x4>;
+	/*
+	 * The first clock must be fixed at 25MHz;
+	 * the second clock must be fixed at 125MHz
+	 */
+	clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+	clock-output-names = "gmac";
+};
+
+mmc_config_clk: clk@01c13000 {
+	compatible = "allwinner,sun9i-a80-mmc-config-clk";
+	reg = <0x01c13000 0x10>;
+	clocks = <&ahb0_gates 8>;
+	clock-names = "ahb";
+	resets = <&ahb0_resets 8>;
+	reset-names = "ahb";
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+	clock-output-names = "mmc0_config", "mmc1_config",
+			     "mmc2_config", "mmc3_config";
+};