Linux-libre 4.6.2-gnu

10 files changed, 115 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/clock/axi-clkgen.txt b/Documentation/devicetree/bindings/clock/axi-clkgen.txt
index 20e1704e7..fb40da303 100644
--- a/Documentation/devicetree/bindings/clock/axi-clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/axi-clkgen.txt
@@ -8,7 +8,10 @@ Required properties:
 - compatible : shall be "adi,axi-clkgen-1.00.a" or "adi,axi-clkgen-2.00.a".
 - #clock-cells : from common clock binding; Should always be set to 0.
 - reg : Address and length of the axi-clkgen register set.
-- clocks : Phandle and clock specifier for the parent clock.
+- clocks : Phandle and clock specifier for the parent clock(s). This must
+	either reference one clock if only the first clock input is connected or two
+	if both clock inputs are connected. For the later case the clock connected
+	to the first input must be specified first.
 
 Optional properties:
 - clock-output-names : From common clock binding.
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
index 0b35e71b3..6f66e9aa3 100644
--- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt
@@ -92,6 +92,7 @@ PLL and leaf clock compatible strings for Cygnus are:
     "brcm,cygnus-lcpll0"
     "brcm,cygnus-mipipll"
     "brcm,cygnus-asiu-clk"
+    "brcm,cygnus-audiopll"
 
 The following table defines the set of PLL/clock index and ID for Cygnus.
 These clock IDs are defined in:
@@ -131,6 +132,11 @@ These clock IDs are defined in:
     ch4_unused mipipll          5       BCM_CYGNUS_MIPIPLL_CH4_UNUSED
     ch5_unused mipipll          6       BCM_CYGNUS_MIPIPLL_CH5_UNUSED
 
+    audiopll   crystal          0       BCM_CYGNUS_AUDIOPLL
+    ch0_audio  audiopll         1       BCM_CYGNUS_AUDIOPLL_CH0
+    ch1_audio  audiopll         2       BCM_CYGNUS_AUDIOPLL_CH1
+    ch2_audio  audiopll         3       BCM_CYGNUS_AUDIOPLL_CH2
+
 Northstar and Northstar Plus
 ------
 PLL and leaf clock compatible strings for Northstar and Northstar Plus are:
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.txt b/Documentation/devicetree/bindings/clock/imx35-clock.txt
index a70356452..f49783213 100644
--- a/Documentation/devicetree/bindings/clock/imx35-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx35-clock.txt
@@ -94,6 +94,7 @@ clocks and IDs.
 	csi_sel			79
 	iim_gate		80
 	gpu2d_gate		81
+	ckli_gate		82
 
 Examples:
 
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt
new file mode 100644
index 000000000..6f1c7b4e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt
@@ -0,0 +1,52 @@
+* NXP LPC1850 CREG clocks
+
+The NXP LPC18xx/43xx CREG (Configuration Registers) block contains
+control registers for two low speed clocks. One of the clocks is a
+32 kHz oscillator driver with power up/down and clock gating. Next
+is a fixed divider that creates a 1 kHz clock from the 32 kHz osc.
+
+These clocks are used by the RTC and the Event Router peripherials.
+The 32 kHz can also be routed to other peripherials to enable low
+power modes.
+
+This binding uses the common clock binding:
+    Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible:
+	Should be "nxp,lpc1850-creg-clk"
+- #clock-cells:
+	Shall have value <1>.
+- clocks:
+	Shall contain a phandle to the fixed 32 kHz crystal.
+
+The creg-clk node must be a child of the creg syscon node.
+
+The following clocks are available from the clock node.
+
+Clock ID	Name
+   0		 1 kHz clock
+   1		32 kHz Oscillator
+
+Example:
+soc {
+	creg: syscon@40043000 {
+		compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
+		reg = <0x40043000 0x1000>;
+
+		creg_clk: clock-controller {
+			compatible = "nxp,lpc1850-creg-clk";
+			clocks = <&xtal32>;
+			#clock-cells = <1>;
+		};
+
+		...
+	};
+
+	rtc: rtc@40046000 {
+		...
+		clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
+		clock-names = "rtc", "reg";
+		...
+	};
+};
diff --git a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
index e0fc2c11d..241fb0545 100644
--- a/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
+++ b/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt
@@ -3,7 +3,7 @@ Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller
 The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB.
 
 Required Properties:
-- compatible: has to be "qca,<soctype>-cpu-intc" and one of the following
+- compatible: has to be "qca,<soctype>-pll" and one of the following
   fallbacks:
   - "qca,ar7100-pll"
   - "qca,ar7240-pll"
@@ -21,8 +21,8 @@ Optional properties:
 
 Example:
 
-	memory-controller@18050000 {
-		compatible = "qca,ar9132-ppl", "qca,ar9130-pll";
+	pll-controller@18050000 {
+		compatible = "qca,ar9132-pll", "qca,ar9130-pll";
 		reg = <0x18050000 0x20>;
 
 		clock-names = "ref";
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 72f82f444..9a60fde32 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -7,6 +7,7 @@ Required properties :
 			"qcom,gcc-apq8064"
 			"qcom,gcc-apq8084"
 			"qcom,gcc-ipq8064"
+			"qcom,gcc-ipq4019"
 			"qcom,gcc-msm8660"
 			"qcom,gcc-msm8916"
 			"qcom,gcc-msm8960"
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
index 59297d34b..fefb80230 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -61,7 +61,7 @@ Examples
 		reg = <0 0xe6e88000 0 64>;
 		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cpg CPG_MOD 310>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac1 0x13>, <&dmac1 0x12>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg>;
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index e59f57b24..834436fbe 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -18,6 +18,7 @@ Required properties:
 	"allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock
 	"allwinner,sun4i-a10-axi-clk" - for the AXI clock
 	"allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23
+	"allwinner,sun4i-a10-gates-clk" - for generic gates on all compatible SoCs
 	"allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates
 	"allwinner,sun4i-a10-ahb-clk" - for the AHB clock
 	"allwinner,sun5i-a13-ahb-clk" - for the AHB clock on A13
@@ -39,12 +40,14 @@ Required properties:
 	"allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
 	"allwinner,sun8i-a23-apb0-clk" - for the APB0 clock on A23
 	"allwinner,sun9i-a80-apb0-clk" - for the APB0 bus clock on A80
+	"allwinner,sun8i-a83t-apb0-gates-clk" - for the APB0 gates on A83T
 	"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
 	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
 	"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
 	"allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31
 	"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
 	"allwinner,sun8i-a23-apb0-gates-clk" - for the APB0 gates on A23
+	"allwinner,sun8i-h3-apb0-gates-clk" - for the APB0 gates on H3
 	"allwinner,sun9i-a80-apb0-gates-clk" - for the APB0 gates on A80
 	"allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
 	"allwinner,sun9i-a80-apb1-clk" - for the APB1 bus clock on A80
@@ -57,6 +60,7 @@ Required properties:
 	"allwinner,sun9i-a80-apb1-gates-clk" - for the APB1 gates on A80
 	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
 	"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
+	"allwinner,sun8i-a83t-bus-gates-clk" - for the bus gates on A83T
 	"allwinner,sun8i-h3-bus-gates-clk" - for the bus gates on H3
 	"allwinner,sun9i-a80-apbs-gates-clk" - for the APBS gates on A80
 	"allwinner,sun4i-a10-dram-gates-clk" - for the DRAM gates on A10
diff --git a/Documentation/devicetree/bindings/clock/ti/adpll.txt b/Documentation/devicetree/bindings/clock/ti/adpll.txt
new file mode 100644
index 000000000..4c8a2ce2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/adpll.txt
@@ -0,0 +1,41 @@
+Binding for Texas Instruments ADPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped ADPLL with two to three selectable input clocks
+and three to four children.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of "ti,dm814-adpll-s-clock" or
+  "ti,dm814-adpll-lj-clock" depending on the type of the ADPLL
+- #clock-cells : from common clock binding; shall be set to 1.
+- clocks : link phandles of parent clocks clkinp and clkinpulow, note
+  that the adpll-s-clock also has an optional clkinphif
+- reg : address and length of the register set for controlling the ADPLL.
+
+Examples:
+	adpll_mpu_ck: adpll@40 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-s-clock";
+		reg = <0x40 0x40>;
+		clocks = <&devosc_ck &devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow", "clkinphif";
+		clock-output-names = "481c5040.adpll.dcoclkldo",
+				     "481c5040.adpll.clkout",
+				     "481c5040.adpll.clkoutx2",
+				     "481c5040.adpll.clkouthif";
+	};
+
+	adpll_dsp_ck: adpll@80 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x80 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5080.adpll.dcoclkldo",
+				     "481c5080.adpll.clkout",
+				     "481c5080.adpll.clkoutldo";
+	};
diff --git a/Documentation/devicetree/bindings/clock/xgene.txt b/Documentation/devicetree/bindings/clock/xgene.txt
index 1c4ef773f..82f963812 100644
--- a/Documentation/devicetree/bindings/clock/xgene.txt
+++ b/Documentation/devicetree/bindings/clock/xgene.txt
@@ -9,6 +9,8 @@ Required properties:
 	"apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
 	"apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
 	"apm,xgene-device-clock" - for a X-Gene device clock
+	"apm,xgene-socpll-v2-clock" - for a X-Gene SoC PLL v2 clock
+	"apm,xgene-pcppll-v2-clock" - for a X-Gene PCP PLL v2 clock
 
 Required properties for SoC or PCP PLL clocks:
 - reg : shall be the physical PLL register address for the pll clock.