Linux-libre 4.5-gnu

2 files changed, 26 insertions, 12 deletions

diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index f344b9e49..e7423bea1 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -14,17 +14,20 @@ Required properties:
 - clocks: device clocks
   See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
 - clock-names: the following clocks are required:
+  * "mdp_core_clk"
+  * "iface_clk"
   * "bus_clk"
-  * "byte_clk"
-  * "core_clk"
   * "core_mmss_clk"
-  * "iface_clk"
-  * "mdp_core_clk"
+  * "byte_clk"
   * "pixel_clk"
+  * "core_clk"
+  For DSIv2, we need an additional clock:
+   * "src_clk"
 - vdd-supply: phandle to vdd regulator device node
 - vddio-supply: phandle to vdd-io regulator device node
 - vdda-supply: phandle to vdda regulator device node
 - qcom,dsi-phy: phandle to DSI PHY device node
+- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
 
 Optional properties:
 - panel@0: Node of panel connected to this DSI controller.
@@ -51,6 +54,7 @@ Required properties:
   * "qcom,dsi-phy-28nm-hpm"
   * "qcom,dsi-phy-28nm-lp"
   * "qcom,dsi-phy-20nm"
+  * "qcom,dsi-phy-28nm-8960"
 - reg: Physical base address and length of the registers of PLL, PHY and PHY
   regulator
 - reg-names: The names of register regions. The following regions are required:
diff --git a/Documentation/devicetree/bindings/display/msm/mdp.txt b/Documentation/devicetree/bindings/display/msm/mdp.txt
index 0833edaba..a214f6cd0 100644
--- a/Documentation/devicetree/bindings/display/msm/mdp.txt
+++ b/Documentation/devicetree/bindings/display/msm/mdp.txt
@@ -2,18 +2,28 @@ Qualcomm adreno/snapdragon display controller
 
 Required properties:
 - compatible:
-  * "qcom,mdp" - mdp4
+  * "qcom,mdp4" - mdp4
+  * "qcom,mdp5" - mdp5
 - reg: Physical base address and length of the controller's registers.
 - interrupts: The interrupt signal from the display controller.
 - connectors: array of phandles for output device(s)
 - clocks: device clocks
   See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required:
-  * "core_clk"
-  * "iface_clk"
-  * "src_clk"
-  * "hdmi_clk"
-  * "mpd_clk"
+- clock-names: the following clocks are required.
+  For MDP4:
+   * "core_clk"
+   * "iface_clk"
+   * "lut_clk"
+   * "src_clk"
+   * "hdmi_clk"
+   * "mdp_clk"
+  For MDP5:
+   * "bus_clk"
+   * "iface_clk"
+   * "core_clk_src"
+   * "core_clk"
+   * "lut_clk" (some MDP5 versions may not need this)
+   * "vsync_clk"
 
 Optional properties:
 - gpus: phandle for gpu device
@@ -26,7 +36,7 @@ Example:
 	...
 
 	mdp: qcom,mdp@5100000 {
-		compatible = "qcom,mdp";
+		compatible = "qcom,mdp4";
 		reg = <0x05100000 0xf0000>;
 		interrupts = <GIC_SPI 75 0>;
 		connectors = <&hdmi>;