Linux-libre 4.3.2-gnu

1 files changed, 46 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt
new file mode 100644
index 000000000..f1634a27a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/sun4i-dma.txt
@@ -0,0 +1,46 @@
+Allwinner A10 DMA Controller
+
+This driver follows the generic DMA bindings defined in dma.txt.
+
+Required properties:
+
+- compatible:	Must be "allwinner,sun4i-a10-dma"
+- reg:		Should contain the registers base address and length
+- interrupts:	Should contain a reference to the interrupt used by this device
+- clocks:	Should contain a reference to the parent AHB clock
+- #dma-cells :	Should be 2, first cell denoting normal or dedicated dma,
+		second cell holding the request line number.
+
+Example:
+	dma: dma-controller@01c02000 {
+		compatible = "allwinner,sun4i-a10-dma";
+		reg = <0x01c02000 0x1000>;
+		interrupts = <27>;
+		clocks = <&ahb_gates 6>;
+		#dma-cells = <2>;
+	};
+
+Clients:
+
+DMA clients connected to the Allwinner A10 DMA controller must use the
+format described in the dma.txt file, using a three-cell specifier for
+each channel: a phandle plus two integer cells.
+The three cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. Whether it is using normal (0) or dedicated (1) channels
+3. The port ID as specified in the datasheet
+
+Example:
+	spi2: spi@01c17000 {
+		compatible = "allwinner,sun4i-a10-spi";
+		reg = <0x01c17000 0x1000>;
+		interrupts = <0 12 4>;
+		clocks = <&ahb_gates 22>, <&spi2_clk>;
+		clock-names = "ahb", "mod";
+		dmas = <&dma 1 29>, <&dma 1 28>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};