summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/drm/imx
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-01-20 14:01:31 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-01-20 14:01:31 -0300
commitb4b7ff4b08e691656c9d77c758fc355833128ac0 (patch)
tree82fcb00e6b918026dc9f2d1f05ed8eee83874cc0 /Documentation/devicetree/bindings/drm/imx
parent35acfa0fc609f2a2cd95cef4a6a9c3a5c38f1778 (diff)
Linux-libre 4.4-gnupck-4.4-gnu
Diffstat (limited to 'Documentation/devicetree/bindings/drm/imx')
-rw-r--r--Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt105
-rw-r--r--Documentation/devicetree/bindings/drm/imx/hdmi.txt58
-rw-r--r--Documentation/devicetree/bindings/drm/imx/ldb.txt146
3 files changed, 0 insertions, 309 deletions
diff --git a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
deleted file mode 100644
index 971c3eedb..000000000
--- a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
+++ /dev/null
@@ -1,105 +0,0 @@
-Freescale i.MX DRM master device
-================================
-
-The freescale i.MX DRM master device is a virtual device needed to list all
-IPU or other display interface nodes that comprise the graphics subsystem.
-
-Required properties:
-- compatible: Should be "fsl,imx-display-subsystem"
-- ports: Should contain a list of phandles pointing to display interface ports
- of IPU devices
-
-example:
-
-display-subsystem {
- compatible = "fsl,display-subsystem";
- ports = <&ipu_di0>;
-};
-
-
-Freescale i.MX IPUv3
-====================
-
-Required properties:
-- compatible: Should be "fsl,<chip>-ipu"
-- reg: should be register base and length as documented in the
- datasheet
-- interrupts: Should contain sync interrupt and error interrupt,
- in this order.
-- resets: phandle pointing to the system reset controller and
- reset line index, see reset/fsl,imx-src.txt for details
-Optional properties:
-- port@[0-3]: Port nodes with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
- Ports 0 and 1 should correspond to CSI0 and CSI1,
- ports 2 and 3 should correspond to DI0 and DI1, respectively.
-
-example:
-
-ipu: ipu@18000000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx53-ipu";
- reg = <0x18000000 0x080000000>;
- interrupts = <11 10>;
- resets = <&src 2>;
-
- ipu_di0: port@2 {
- reg = <2>;
-
- ipu_di0_disp0: endpoint {
- remote-endpoint = <&display_in>;
- };
- };
-};
-
-Parallel display support
-========================
-
-Required properties:
-- compatible: Should be "fsl,imx-parallel-display"
-Optional properties:
-- interface_pix_fmt: How this display is connected to the
- display interface. Currently supported types: "rgb24", "rgb565", "bgr666"
- and "lvds666".
-- edid: verbatim EDID data block describing attached display.
-- ddc: phandle describing the i2c bus handling the display data
- channel
-- port@[0-1]: Port nodes with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
- Port 0 is the input port connected to the IPU display interface,
- port 1 is the output port connected to a panel.
-
-example:
-
-display@di0 {
- compatible = "fsl,imx-parallel-display";
- edid = [edid-data];
- interface-pix-fmt = "rgb24";
-
- port@0 {
- reg = <0>;
-
- display_in: endpoint {
- remote-endpoint = <&ipu_di0_disp0>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- display_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
-};
-
-panel {
- ...
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&display_out>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/drm/imx/hdmi.txt b/Documentation/devicetree/bindings/drm/imx/hdmi.txt
deleted file mode 100644
index 1b756cf9a..000000000
--- a/Documentation/devicetree/bindings/drm/imx/hdmi.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Device-Tree bindings for HDMI Transmitter
-
-HDMI Transmitter
-================
-
-The HDMI Transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
-with accompanying PHY IP.
-
-Required properties:
- - #address-cells : should be <1>
- - #size-cells : should be <0>
- - compatible : should be "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi".
- - gpr : should be <&gpr>.
- The phandle points to the iomuxc-gpr region containing the HDMI
- multiplexer control register.
- - clocks, clock-names : phandles to the HDMI iahb and isrf clocks, as described
- in Documentation/devicetree/bindings/clock/clock-bindings.txt and
- Documentation/devicetree/bindings/clock/imx6q-clock.txt.
- - port@[0-4]: Up to four port nodes with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt,
- corresponding to the four inputs to the HDMI multiplexer.
-
-Optional properties:
- - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-
-example:
-
- gpr: iomuxc-gpr@020e0000 {
- /* ... */
- };
-
- hdmi: hdmi@0120000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx6q-hdmi";
- reg = <0x00120000 0x9000>;
- interrupts = <0 115 0x04>;
- gpr = <&gpr>;
- clocks = <&clks 123>, <&clks 124>;
- clock-names = "iahb", "isfr";
- ddc-i2c-bus = <&i2c2>;
-
- port@0 {
- reg = <0>;
-
- hdmi_mux_0: endpoint {
- remote-endpoint = <&ipu1_di0_hdmi>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- hdmi_mux_1: endpoint {
- remote-endpoint = <&ipu1_di1_hdmi>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/drm/imx/ldb.txt b/Documentation/devicetree/bindings/drm/imx/ldb.txt
deleted file mode 100644
index 9a2136643..000000000
--- a/Documentation/devicetree/bindings/drm/imx/ldb.txt
+++ /dev/null
@@ -1,146 +0,0 @@
-Device-Tree bindings for LVDS Display Bridge (ldb)
-
-LVDS Display Bridge
-===================
-
-The LVDS Display Bridge device tree node contains up to two lvds-channel
-nodes describing each of the two LVDS encoder channels of the bridge.
-
-Required properties:
- - #address-cells : should be <1>
- - #size-cells : should be <0>
- - compatible : should be "fsl,imx53-ldb" or "fsl,imx6q-ldb".
- Both LDB versions are similar, but i.MX6 has an additional
- multiplexer in the front to select any of the four IPU display
- interfaces as input for each LVDS channel.
- - gpr : should be <&gpr> on i.MX53 and i.MX6q.
- The phandle points to the iomuxc-gpr region containing the LVDS
- control register.
-- clocks, clock-names : phandles to the LDB divider and selector clocks and to
- the display interface selector clocks, as described in
- Documentation/devicetree/bindings/clock/clock-bindings.txt
- The following clocks are expected on i.MX53:
- "di0_pll" - LDB LVDS channel 0 mux
- "di1_pll" - LDB LVDS channel 1 mux
- "di0" - LDB LVDS channel 0 gate
- "di1" - LDB LVDS channel 1 gate
- "di0_sel" - IPU1 DI0 mux
- "di1_sel" - IPU1 DI1 mux
- On i.MX6q the following additional clocks are needed:
- "di2_sel" - IPU2 DI0 mux
- "di3_sel" - IPU2 DI1 mux
- The needed clock numbers for each are documented in
- Documentation/devicetree/bindings/clock/imx5-clock.txt, and in
- Documentation/devicetree/bindings/clock/imx6q-clock.txt.
-
-Optional properties:
- - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
- - pinctrl-0 : a phandle pointing to LVDS pin settings on i.MX53,
- not used on i.MX6q
- - fsl,dual-channel : boolean. if it exists, only LVDS channel 0 should
- be configured - one input will be distributed on both outputs in dual
- channel mode
-
-LVDS Channel
-============
-
-Each LVDS Channel has to contain either an of graph link to a panel device node
-or a display-timings node that describes the video timings for the connected
-LVDS display as well as the fsl,data-mapping and fsl,data-width properties.
-
-Required properties:
- - reg : should be <0> or <1>
- - port: Input and output port nodes with endpoint definitions as defined in
- Documentation/devicetree/bindings/graph.txt.
- On i.MX5, the internal two-input-multiplexer is used. Due to hardware
- limitations, only one input port (port@[0,1]) can be used for each channel
- (lvds-channel@[0,1], respectively).
- On i.MX6, there should be four input ports (port@[0-3]) that correspond
- to the four LVDS multiplexer inputs.
- A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected
- to a panel input port. Optionally, the output port can be left out if
- display-timings are used instead.
-
-Optional properties (required if display-timings are used):
- - display-timings : A node that describes the display timings as defined in
- Documentation/devicetree/bindings/video/display-timing.txt.
- - fsl,data-mapping : should be "spwg" or "jeida"
- This describes how the color bits are laid out in the
- serialized LVDS signal.
- - fsl,data-width : should be <18> or <24>
-
-example:
-
-gpr: iomuxc-gpr@53fa8000 {
- /* ... */
-};
-
-ldb: ldb@53fa8008 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx53-ldb";
- gpr = <&gpr>;
- clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
- <&clks IMX5_CLK_LDB_DI1_SEL>,
- <&clks IMX5_CLK_IPU_DI0_SEL>,
- <&clks IMX5_CLK_IPU_DI1_SEL>,
- <&clks IMX5_CLK_LDB_DI0_GATE>,
- <&clks IMX5_CLK_LDB_DI1_GATE>;
- clock-names = "di0_pll", "di1_pll",
- "di0_sel", "di1_sel",
- "di0", "di1";
-
- /* Using an of-graph endpoint link to connect the panel */
- lvds-channel@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- port@0 {
- reg = <0>;
-
- lvds0_in: endpoint {
- remote-endpoint = <&ipu_di0_lvds0>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- lvds0_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
- };
-
- /* Using display-timings and fsl,data-mapping/width instead */
- lvds-channel@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- fsl,data-mapping = "spwg";
- fsl,data-width = <24>;
-
- display-timings {
- /* ... */
- };
-
- port@1 {
- reg = <1>;
-
- lvds1_in: endpoint {
- remote-endpoint = <&ipu_di1_lvds1>;
- };
- };
- };
-};
-
-panel: lvds-panel {
- /* ... */
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&lvds0_out>;
- };
- };
-};