diff options
author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2016-01-20 14:01:31 -0300 |
---|---|---|
committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2016-01-20 14:01:31 -0300 |
commit | b4b7ff4b08e691656c9d77c758fc355833128ac0 (patch) | |
tree | 82fcb00e6b918026dc9f2d1f05ed8eee83874cc0 /Documentation/devicetree/bindings/drm/tilcdc | |
parent | 35acfa0fc609f2a2cd95cef4a6a9c3a5c38f1778 (diff) |
Linux-libre 4.4-gnupck-4.4-gnu
Diffstat (limited to 'Documentation/devicetree/bindings/drm/tilcdc')
3 files changed, 0 insertions, 143 deletions
diff --git a/Documentation/devicetree/bindings/drm/tilcdc/panel.txt b/Documentation/devicetree/bindings/drm/tilcdc/panel.txt deleted file mode 100644 index 4ab9e2300..000000000 --- a/Documentation/devicetree/bindings/drm/tilcdc/panel.txt +++ /dev/null @@ -1,66 +0,0 @@ -Device-Tree bindings for tilcdc DRM generic panel output driver - -Required properties: - - compatible: value should be "ti,tilcdc,panel". - - panel-info: configuration info to configure LCDC correctly for the panel - - ac-bias: AC Bias Pin Frequency - - ac-bias-intrpt: AC Bias Pin Transitions per Interrupt - - dma-burst-sz: DMA burst size - - bpp: Bits per pixel - - fdd: FIFO DMA Request Delay - - sync-edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling - - sync-ctrl: Horizontal and Vertical Sync: Control: 0=ignore - - raster-order: Raster Data Order Select: 1=Most-to-least 0=Least-to-most - - fifo-th: DMA FIFO threshold - - display-timings: typical videomode of lcd panel. Multiple video modes - can be listed if the panel supports multiple timings, but the 'native-mode' - should be the preferred/default resolution. Refer to - Documentation/devicetree/bindings/video/display-timing.txt for display - timing binding details. - -Optional properties: -- backlight: phandle of the backlight device attached to the panel -- enable-gpios: GPIO pin to enable or disable the panel - -Recommended properties: - - pinctrl-names, pinctrl-0: the pincontrol settings to configure - muxing properly for pins that connect to TFP410 device - -Example: - - /* Settings for CDTech_S035Q01 / LCD3 cape: */ - lcd3 { - compatible = "ti,tilcdc,panel"; - pinctrl-names = "default"; - pinctrl-0 = <&bone_lcd3_cape_lcd_pins>; - backlight = <&backlight>; - enable-gpios = <&gpio3 19 0>; - - panel-info { - ac-bias = <255>; - ac-bias-intrpt = <0>; - dma-burst-sz = <16>; - bpp = <16>; - fdd = <0x80>; - sync-edge = <0>; - sync-ctrl = <1>; - raster-order = <0>; - fifo-th = <0>; - }; - display-timings { - native-mode = <&timing0>; - timing0: 320x240 { - hactive = <320>; - vactive = <240>; - hback-porch = <21>; - hfront-porch = <58>; - hsync-len = <47>; - vback-porch = <11>; - vfront-porch = <23>; - vsync-len = <2>; - clock-frequency = <8000000>; - hsync-active = <0>; - vsync-active = <0>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/drm/tilcdc/tfp410.txt b/Documentation/devicetree/bindings/drm/tilcdc/tfp410.txt deleted file mode 100644 index a58ae7756..000000000 --- a/Documentation/devicetree/bindings/drm/tilcdc/tfp410.txt +++ /dev/null @@ -1,21 +0,0 @@ -Device-Tree bindings for tilcdc DRM TFP410 output driver - -Required properties: - - compatible: value should be "ti,tilcdc,tfp410". - - i2c: the phandle for the i2c device to use for DDC - -Recommended properties: - - pinctrl-names, pinctrl-0: the pincontrol settings to configure - muxing properly for pins that connect to TFP410 device - - powerdn-gpio: the powerdown GPIO, pulled low to power down the - TFP410 device (for DPMS_OFF) - -Example: - - dvicape { - compatible = "ti,tilcdc,tfp410"; - i2c = <&i2c2>; - pinctrl-names = "default"; - pinctrl-0 = <&bone_dvi_cape_dvi_00A1_pins>; - powerdn-gpio = <&gpio2 31 0>; - }; diff --git a/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt deleted file mode 100644 index 2136ee81e..000000000 --- a/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt +++ /dev/null @@ -1,56 +0,0 @@ -Device-Tree bindings for tilcdc DRM driver - -Required properties: - - compatible: value should be "ti,am33xx-tilcdc". - - interrupts: the interrupt number - - reg: base address and size of the LCDC device - -Recommended properties: - - interrupt-parent: the phandle for the interrupt controller that - services interrupts for this device. - - ti,hwmods: Name of the hwmod associated to the LCDC - -Optional properties: - - max-bandwidth: The maximum pixels per second that the memory - interface / lcd controller combination can sustain - - max-width: The maximum horizontal pixel width supported by - the lcd controller. - - max-pixelclock: The maximum pixel clock that can be supported - by the lcd controller in KHz. - -Optional nodes: - - - port/ports: to describe a connection to an external encoder. The - binding follows Documentation/devicetree/bindings/graph.txt and - suppors a single port with a single endpoint. - -Example: - - fb: fb@4830e000 { - compatible = "ti,am33xx-tilcdc"; - reg = <0x4830e000 0x1000>; - interrupt-parent = <&intc>; - interrupts = <36>; - ti,hwmods = "lcdc"; - - port { - lcdc_0: endpoint@0 { - remote-endpoint = <&hdmi_0>; - }; - }; - }; - - tda19988: tda19988 { - compatible = "nxp,tda998x"; - reg = <0x70>; - - pinctrl-names = "default", "off"; - pinctrl-0 = <&nxp_hdmi_bonelt_pins>; - pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; - - port { - hdmi_0: endpoint@0 { - remote-endpoint = <&lcdc_0>; - }; - }; - }; |