Initial import

19 files changed, 685 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
new file mode 100644
index 000000000..f40f21c64
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
@@ -0,0 +1,30 @@
+* AUO in-cell touchscreen controller using Pixcir sensors
+
+Required properties:
+- compatible: must be "auo,auo_pixcir_ts"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- gpios: gpios the chip is connected to
+  first one is the interrupt gpio and second one the reset gpio
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		auo_pixcir_ts@5c {
+			compatible = "auo,auo_pixcir_ts";
+			reg = <0x5c>;
+			interrupts = <2 0>;
+
+			gpios = <&gpf 2 0 2>, /* INT */
+				<&gpf 5 1 0>; /* RST */
+
+			x-size = <800>;
+			y-size = <600>;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
new file mode 100644
index 000000000..34e3382a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
@@ -0,0 +1,76 @@
+* Broadcom's IPROC Touchscreen Controller
+
+Required properties:
+- compatible: must be "brcm,iproc-touchscreen"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- clocks:  The clock provided by the SOC to driver the tsc
+- clock-name:  name for the clock
+- interrupts: The touchscreen controller's interrupt
+
+Optional properties:
+- scanning_period: Time between scans. Each step is 1024 us.  Valid 1-256.
+- debounce_timeout: Each step is 512 us.  Valid 0-255
+- settling_timeout: The settling duration (in ms) is the amount of time
+                    the tsc waits to allow the voltage to settle after
+                    turning on the drivers in detection mode.
+                    Valid values: 0-11
+                    0 =  0.008 ms
+                    1 =  0.01 ms
+                    2 =  0.02 ms
+                    3 =  0.04 ms
+                    4 =  0.08 ms
+                    5 =  0.16 ms
+                    6 =  0.32 ms
+                    7 =  0.64 ms
+                    8 =  1.28 ms
+                    9 =  2.56 ms
+                   10 =  5.12 ms
+                   11 = 10.24 ms
+- touch_timeout: The continuous number of scan periods in which touch is
+                not detected before the controller returns to idle state.
+                Valid values 0-255.
+- average_data: Number of data samples which are averaged before a final
+                data point is placed into the FIFO
+                Valid values 0-7
+                0 =   1 sample
+                1 =   2 samples
+                2 =   4 samples
+                3 =   8 samples
+                4 =  16 samples
+                5 =  32 samples
+                6 =  64 samples
+                7 = 128 samples
+- fifo_threshold: Interrupt is generated whenever the number of fifo
+                entries exceeds this value
+                Valid values 0-31
+- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
+- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
+- touchscreen-fuzz-x: horizontal noise value of the absolute input
+                      device (in pixels)
+- touchscreen-fuzz-y: vertical noise value of the absolute input
+                      device (in pixels)
+- touchscreen-inverted-x: X axis is inverted (boolean)
+- touchscreen-inverted-y: Y axis is inverted (boolean)
+
+Example:
+
+	touchscreen: tsc@0x180A6000 {
+		compatible = "brcm,iproc-touchscreen";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x180A6000 0x40>;
+		clocks = <&adc_clk>;
+		clock-names = "tsc_clk";
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+		scanning_period = <5>;
+		debounce_timeout = <40>;
+		settling_timeout = <7>;
+		touch_timeout = <10>;
+		average_data = <5>;
+		fifo_threshold = <1>;
+		/* Touchscreen is rotated 180 degrees. */
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
new file mode 100644
index 000000000..ca5a2c864
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
@@ -0,0 +1,28 @@
+* Rohm BU21013 Touch Screen
+
+Required properties:
+ - compatible              : "rohm,bu21013_tp"
+ - reg                     :  I2C device address
+
+Optional properties:
+ - touch-gpio              : GPIO pin registering a touch event
+ - <supply_name>-supply    : Phandle to a regulator supply
+ - rohm,touch-max-x        : Maximum outward permitted limit in the X axis
+ - rohm,touch-max-y        : Maximum outward permitted limit in the Y axis
+ - rohm,flip-x             : Flip touch coordinates on the X axis
+ - rohm,flip-y             : Flip touch coordinates on the Y axis
+
+Example:
+
+	i2c@80110000 {
+		bu21013_tp@0x5c {
+			compatible = "rohm,bu21013_tp";
+			reg = <0x5c>;
+			touch-gpio = <&gpio2 20 0x4>;
+			avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+			rohm,touch-max-x = <384>;
+			rohm,touch-max-y = <704>;
+			rohm,flip-y;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
new file mode 100644
index 000000000..d11f8d615
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
@@ -0,0 +1,46 @@
+* ChipOne icn8318 I2C touchscreen controller
+
+Required properties:
+ - compatible		  : "chipone,icn8318"
+ - reg			  : I2C slave address of the chip (0x40)
+ - interrupt-parent	  : a phandle pointing to the interrupt controller
+			    serving the interrupt for this chip
+ - interrupts		  : interrupt specification for the icn8318 interrupt
+ - wake-gpios		  : GPIO specification for the WAKE input
+ - touchscreen-size-x	  : horizontal resolution of touchscreen (in pixels)
+ - touchscreen-size-y	  : vertical resolution of touchscreen (in pixels)
+
+Optional properties:
+ - pinctrl-names	  : should be "default"
+ - pinctrl-0:		  : a phandle pointing to the pin settings for the
+			    control gpios
+ - touchscreen-fuzz-x	  : horizontal noise value of the absolute input
+			    device (in pixels)
+ - touchscreen-fuzz-y	  : vertical noise value of the absolute input
+			    device (in pixels)
+ - touchscreen-inverted-x : X axis is inverted (boolean)
+ - touchscreen-inverted-y : Y axis is inverted (boolean)
+ - touchscreen-swapped-x-y	  : X and Y axis are swapped (boolean)
+			    Swapping is done after inverting the axis
+
+Example:
+
+i2c@00000000 {
+	/* ... */
+
+	chipone_icn8318@40 {
+		compatible = "chipone,icn8318";
+		reg = <0x40>;
+		interrupt-parent = <&pio>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_wake_pin_p66>;
+		wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+	};
+
+	/* ... */
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
new file mode 100644
index 000000000..76db96704
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
@@ -0,0 +1,55 @@
+FocalTech EDT-FT5x06 Polytouch driver
+=====================================
+
+There are 3 variants of the chip for various touch panel sizes
+FT5206GE1  2.8" .. 3.8"
+FT5306DE4  4.3" .. 7"
+FT5406EE8  7"   .. 8.9"
+
+The software interface is identical for all those chips, so that
+currently there is no need for the driver to distinguish between the
+different chips. Nevertheless distinct compatible strings are used so
+that a distinction can be added if necessary without changing the DT
+bindings.
+
+
+Required properties:
+ - compatible:  "edt,edt-ft5206"
+           or:  "edt,edt-ft5306"
+           or:  "edt,edt-ft5406"
+
+ - reg:         I2C slave address of the chip (0x38)
+ - interrupt-parent: a phandle pointing to the interrupt controller
+                     serving the interrupt for this chip
+ - interrupts:       interrupt specification for the touchdetect
+                     interrupt
+
+Optional properties:
+ - reset-gpios: GPIO specification for the RESET input
+ - wake-gpios:  GPIO specification for the WAKE input
+
+ - pinctrl-names: should be "default"
+ - pinctrl-0:   a phandle pointing to the pin settings for the
+                control gpios
+
+ - threshold:   allows setting the "click"-threshold in the range
+                from 20 to 80.
+
+ - gain:        allows setting the sensitivity in the range from 0 to
+                31. Note that lower values indicate higher
+                sensitivity.
+
+ - offset:      allows setting the edge compensation in the range from
+                0 to 31.
+
+Example:
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&edt_ft5x06_pins>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <5 0>;
+		reset-gpios = <&gpio2 6 1>;
+		wake-gpios = <&gpio4 9 0>;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
new file mode 100644
index 000000000..49fa14ed1
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
@@ -0,0 +1,19 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+- wakeup-gpios: the gpio pin to be used for waking up the controller
+  and also used as irq pin
+
+Example:
+
+	egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 2>;
+		wakeup-gpios = <&gpio1 9 0>;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
new file mode 100644
index 000000000..8ba98eec7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
@@ -0,0 +1,29 @@
+Device tree bindings for Goodix GT9xx series touchscreen controller
+
+Required properties:
+
+ - compatible		: Should be "goodix,gt911"
+				 or "goodix,gt9110"
+				 or "goodix,gt912"
+				 or "goodix,gt927"
+				 or "goodix,gt9271"
+				 or "goodix,gt928"
+				 or "goodix,gt967"
+ - reg			: I2C address of the chip. Should be 0x5d or 0x14
+ - interrupt-parent	: Interrupt controller to which the chip is connected
+ - interrupts		: Interrupt to which the chip is connected
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		gt928@5d {
+			compatible = "goodix,gt928";
+			reg = <0x5d>;
+			interrupt-parent = <&gpio>;
+			interrupts = <0 0>;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt
new file mode 100644
index 000000000..41cbf4b7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt
@@ -0,0 +1,16 @@
+* NXP LPC32xx SoC Touchscreen Controller (TSC)
+
+Required properties:
+- compatible: must be "nxp,lpc3220-tsc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: The TSC/ADC interrupt
+
+Example:
+
+	tsc@40048000 {
+		compatible = "nxp,lpc3220-tsc";
+		reg = <0x40048000 0x1000>;
+		interrupt-parent = <&mic>;
+		interrupts = <39 0>;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt b/Documentation/devicetree/bindings/input/touchscreen/mms114.txt
new file mode 100644
index 000000000..89d4c56c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/mms114.txt
@@ -0,0 +1,34 @@
+* MELFAS MMS114 touchscreen controller
+
+Required properties:
+- compatible: must be "melfas,mms114"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Optional properties:
+- contact-threshold:
+- moving-threshold:
+- x-invert: invert X axis
+- y-invert: invert Y axis
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		touchscreen@48 {
+			compatible = "melfas,mms114";
+			reg = <0x48>;
+			interrupts = <39 0>;
+			x-size = <720>;
+			y-size = <1280>;
+			contact-threshold = <10>;
+			moving-threshold = <10>;
+			x-invert;
+			y-invert;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
new file mode 100644
index 000000000..6e551090f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
@@ -0,0 +1,26 @@
+* Pixcir I2C touchscreen controllers
+
+Required properties:
+- compatible: must be "pixcir,pixcir_ts" or "pixcir,pixcir_tangoc"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- attb-gpio: GPIO connected to the ATTB line of the chip
+- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
+- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		pixcir_ts@5c {
+			compatible = "pixcir,pixcir_ts";
+			reg = <0x5c>;
+			interrupts = <2 0>;
+			attb-gpio = <&gpf 2 0 2>;
+			touchscreen-size-x = <800>;
+			touchscreen-size-y = <600>;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
new file mode 100644
index 000000000..64ad48b82
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
@@ -0,0 +1,24 @@
+* Sitronix st1232 touchscreen controller
+
+Required properties:
+- compatible: must be "sitronix,st1232"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+
+Optional properties:
+- gpios: a phandle to the reset GPIO
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		touchscreen@55 {
+			compatible = "sitronix,st1232";
+			reg = <0x55>;
+			interrupts = <2 0>;
+			gpios = <&gpio1 166 0>;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
new file mode 100644
index 000000000..127baa31a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
@@ -0,0 +1,43 @@
+STMPE Touchscreen
+----------------
+
+Required properties:
+ - compatible: "st,stmpe-ts"
+
+Optional properties:
+- st,sample-time: ADC converstion time in number of clock.  (0 -> 36 clocks, 1 ->
+  44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6
+  -> 144 clocks), recommended is 4.
+- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
+- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external
+  reference)
+- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
+- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4
+  samples, 3 -> 8 samples)
+- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 ->
+  100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended
+  is 3
+- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3
+  -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2
+- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of
+  the fractional part) recommended is 7
+- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35
+  mA max, 1 -> 50 mA typical 80 mA max)
+
+Node name must be stmpe_touchscreen and should be child node of stmpe node to
+which it belongs.
+
+Example:
+
+	stmpe_touchscreen {
+		compatible = "st,stmpe-ts";
+		st,sample-time = <4>;
+		st,mod-12b = <1>;
+		st,ref-sel = <0>;
+		st,adc-freq = <1>;
+		st,ave-ctrl = <1>;
+		st,touch-det-delay = <2>;
+		st,settling = <2>;
+		st,fraction-z = <7>;
+		st,i-drive = <1>;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
new file mode 100644
index 000000000..89abecd93
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
@@ -0,0 +1,38 @@
+sun4i resistive touchscreen controller
+--------------------------------------
+
+Required properties:
+ - compatible: "allwinner,sun4i-a10-ts", "allwinner,sun5i-a13-ts" or
+   "allwinner,sun6i-a31-ts"
+ - reg: mmio address range of the chip
+ - interrupts: interrupt to which the chip is connected
+ - #thermal-sensor-cells: shall be 0
+
+Optional properties:
+ - allwinner,ts-attached	 : boolean indicating that an actual touchscreen
+				   is attached to the controller
+ - allwinner,tp-sensitive-adjust : integer (4 bits)
+				   adjust sensitivity of pen down detection
+				   between 0 (least sensitive) and 15
+				   (defaults to 15)
+ - allwinner,filter-type	 : integer (2 bits)
+				   select median and averaging filter
+				   samples used for median / averaging filter
+				   0: 4/2
+				   1: 5/3
+				   2: 8/4
+				   3: 16/8
+				   (defaults to 1)
+
+Example:
+
+	rtp: rtp@01c25000 {
+		compatible = "allwinner,sun4i-a10-ts";
+		reg = <0x01c25000 0x100>;
+		interrupts = <29>;
+		allwinner,ts-attached;
+		#thermal-sensor-cells = <0>;
+		/* sensitive/noisy touch panel */
+		allwinner,tp-sensitive-adjust = <0>;
+		allwinner,filter-type = <3>;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
new file mode 100644
index 000000000..5aaa6b3aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
@@ -0,0 +1,16 @@
+* Semtech SX8654 I2C Touchscreen Controller
+
+Required properties:
+- compatible: must be "semtech,sx8654"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+
+Example:
+
+	sx8654@48 {
+		compatible = "semtech,sx8654";
+		reg = <0x48>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
new file mode 100644
index 000000000..6c4fb3482
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
@@ -0,0 +1,59 @@
+* TI - TSC ADC (Touschscreen and analog digital converter)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Required properties:
+- child "tsc"
+	ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
+		  support on the platform.
+	ti,x-plate-resistance: X plate resistance
+	ti,coordinate-readouts: The sequencer supports a total of 16
+				programmable steps each step is used to
+				read a single coordinate. A single
+                                readout is enough but multiple reads can
+				increase the quality.
+				A value of 5 means, 5 reads for X, 5 for
+				Y and 2 for Z (always). This utilises 12
+				of the 16 software steps available. The
+				remaining 4 can be used by the ADC.
+	ti,wire-config: Different boards could have a different order for
+			connecting wires on touchscreen. We need to provide an
+			8 bit number where in the 1st four bits represent the
+			analog lines and the next 4 bits represent positive/
+			negative terminal on that input line. Notations to
+			represent the input lines and terminals resoectively
+			is as follows:
+			AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
+			XP  = 0, XN = 1, YP = 2, YN = 3.
+- child "adc"
+	ti,adc-channels: List of analog inputs available for ADC.
+			 AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
+
+Optional properties:
+- child "tsc"
+	ti,charge-delay: Length of touch screen charge delay step in terms of
+			 ADC clock cycles. Charge delay value should be large
+			 in order to avoid false pen-up events. This value
+			 effects the overall sampling speed, hence need to be
+			 kept as low as possible, while avoiding false pen-up
+			 event. Start from a lower value, say 0x400, and
+			 increase value until false pen-up events are avoided.
+			 The pen-up detection happens immediately after the
+			 charge step, so this does in fact function as a
+			 hardware knob for adjusting the amount of "settling
+			 time".
+
+Example:
+	tscadc: tscadc@44e0d000 {
+		compatible = "ti,am3359-tscadc";
+		tsc {
+			ti,wires = <4>;
+			ti,x-plate-resistance = <200>;
+			ti,coordiante-readouts = <5>;
+			ti,wire-config = <0x00 0x11 0x22 0x33>;
+			ti,charge-delay = <0x400>;
+		};
+
+		adc {
+			ti,adc-channels = <4 5 6 7>;
+		};
+	}
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
new file mode 100644
index 000000000..ac23caf51
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
@@ -0,0 +1,29 @@
+General Touchscreen Properties:
+
+Optional properties for Touchscreens:
+ - touchscreen-size-x		: horizontal resolution of touchscreen
+				  (in pixels)
+ - touchscreen-size-y		: vertical resolution of touchscreen
+				  (in pixels)
+ - touchscreen-max-pressure	: maximum reported pressure (arbitrary range
+				  dependent on the controller)
+ - touchscreen-fuzz-x		: horizontal noise value of the absolute input
+				  device (in pixels)
+ - touchscreen-fuzz-y		: vertical noise value of the absolute input
+				  device (in pixels)
+ - touchscreen-fuzz-pressure	: pressure noise value of the absolute input
+				  device (arbitrary range dependent on the
+				  controller)
+ - touchscreen-inverted-x	: X axis is inverted (boolean)
+ - touchscreen-inverted-y	: Y axis is inverted (boolean)
+ - touchscreen-swapped-x-y	: X and Y axis are swapped (boolean)
+				  Swapping is done after inverting the axis
+
+Deprecated properties for Touchscreens:
+ - x-size			: deprecated name for touchscreen-size-x
+ - y-size			: deprecated name for touchscreen-size-y
+ - moving-threshold		: deprecated name for a combination of
+				  touchscreen-fuzz-x and touchscreen-fuzz-y
+ - contact-threshold		: deprecated name for touchscreen-fuzz-pressure
+ - x-invert			: deprecated name for touchscreen-inverted-x
+ - y-invert			: deprecated name for touchscreen-inverted-y
diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
new file mode 100644
index 000000000..09089a6d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
@@ -0,0 +1,42 @@
+* Texas Instruments tsc2005 touchscreen controller
+
+Required properties:
+ - compatible		      : "ti,tsc2005"
+ - reg			      : SPI device address
+ - spi-max-frequency	      : Maximal SPI speed
+ - interrupts		      : IRQ specifier
+ - reset-gpios		      : GPIO specifier
+ - vio-supply                 : Regulator specifier
+
+Optional properties:
+ - ti,x-plate-ohms	      : integer, resistance of the touchscreen's X plates
+				in ohm (defaults to 280)
+ - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after
+				the configured time (in milli seconds), the driver
+				will reset it. This is disabled by default.
+ - properties defined in touchscreen.txt
+
+Example:
+
+&mcspi1 {
+	tsc2005@0 {
+		compatible = "ti,tsc2005";
+		spi-max-frequency = <6000000>;
+		reg = <0>;
+
+		vio-supply = <&vio>;
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+}
diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
new file mode 100644
index 000000000..ec365e172
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
@@ -0,0 +1,41 @@
+* Texas Instruments tsc2007 touchscreen controller
+
+Required properties:
+- compatible: must be "ti,tsc2007".
+- reg: I2C address of the chip.
+- ti,x-plate-ohms: X-plate resistance in ohms.
+
+Optional properties:
+- gpios: the interrupt gpio the chip is connected to (trough the penirq pin).
+  The penirq pin goes to low when the panel is touched.
+  (see GPIO binding[1] for more details).
+- interrupt-parent: the phandle for the gpio controller
+  (see interrupt binding[0]).
+- interrupts: (gpio) interrupt to which the chip is connected
+  (see interrupt binding[0]).
+- ti,max-rt: maximum pressure.
+- ti,fuzzx: specifies the absolute input fuzz x value.
+  If set, it will permit noise in the data up to +- the value given to the fuzz
+  parameter, that is used to filter noise from the event stream.
+- ti,fuzzy: specifies the absolute input fuzz y value.
+- ti,fuzzz: specifies the absolute input fuzz z value.
+- ti,poll-period: how much time to wait (in milliseconds) before reading again the
+  values from the tsc2007.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+	&i2c1 {
+		/* ... */
+		tsc2007@49 {
+			compatible = "ti,tsc2007";
+			reg = <0x49>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <0x0 0x8>;
+			gpios = <&gpio4 0 0>;
+			ti,x-plate-ohms = <180>;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
new file mode 100644
index 000000000..80c37df94
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
@@ -0,0 +1,34 @@
+* Neonode infrared touchscreen controller
+
+Required properties:
+- compatible: must be "neonode,zforce"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- gpios: gpios the chip is connected to
+  first one is the interrupt gpio and second one the reset gpio
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Optional properties:
+- vdd-supply: Regulator controlling the controller supply
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		zforce_ts@50 {
+			compatible = "neonode,zforce";
+			reg = <0x50>;
+			interrupts = <2 0>;
+			vdd-supply = <&reg_zforce_vdd>;
+
+			gpios = <&gpio5 6 0>, /* INT */
+				<&gpio5 9 0>; /* RST */
+
+			x-size = <800>;
+			y-size = <600>;
+		};
+
+		/* ... */
+	};