summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/mfd
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-01-20 14:01:31 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-01-20 14:01:31 -0300
commitb4b7ff4b08e691656c9d77c758fc355833128ac0 (patch)
tree82fcb00e6b918026dc9f2d1f05ed8eee83874cc0 /Documentation/devicetree/bindings/mfd
parent35acfa0fc609f2a2cd95cef4a6a9c3a5c38f1778 (diff)
Linux-libre 4.4-gnupck-4.4-gnu
Diffstat (limited to 'Documentation/devicetree/bindings/mfd')
-rw-r--r--Documentation/devicetree/bindings/mfd/arizona.txt15
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel-flexcom.txt63
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt2
-rw-r--r--Documentation/devicetree/bindings/mfd/axp20x.txt4
-rw-r--r--Documentation/devicetree/bindings/mfd/cros-ec.txt4
-rw-r--r--Documentation/devicetree/bindings/mfd/da9150.txt33
-rw-r--r--Documentation/devicetree/bindings/mfd/s2mps11.txt28
-rw-r--r--Documentation/devicetree/bindings/mfd/sky81452.txt2
-rw-r--r--Documentation/devicetree/bindings/mfd/tc3589x.txt1
9 files changed, 122 insertions, 30 deletions
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index a8fee60dc..18be0cbfb 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -44,7 +44,6 @@ Required properties:
Optional properties:
- wlf,reset : GPIO specifier for the GPIO controlling /RESET
- - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA
- wlf,gpio-defaults : A list of GPIO configuration register values. Defines
for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
@@ -67,21 +66,13 @@ Optional properties:
present, the number of values should be less than or equal to the
number of inputs, unspecified inputs will use the chip default.
- - wlf,hpdet-channel : Headphone detection channel.
- ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL
- ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR
- If this node is not mentioned or if the value is unknown, then
- headphone detection mode is set to HPDETL.
-
- DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
they are being externally supplied. As covered in
Documentation/devicetree/bindings/regulator/regulator.txt
-Optional subnodes:
- - ldo1 : Initial data for the LDO1 regulator, as covered in
- Documentation/devicetree/bindings/regulator/regulator.txt
- - micvdd : Initial data for the MICVDD regulator, as covered in
- Documentation/devicetree/bindings/regulator/regulator.txt
+Also see child specific device properties:
+ Regulator - ../regulator/arizona-regulator.txt
+ Extcon - ../extcon/extcon-arizona.txt
Example:
diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
new file mode 100644
index 000000000..692300117
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
@@ -0,0 +1,63 @@
+* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
+
+The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
+controller and an USART. Only one function can be used at a time and is chosen
+at boot time according to the device tree.
+
+Required properties:
+- compatible: Should be "atmel,sama5d2-flexcom"
+- reg: Should be the offset/length value for Flexcom dedicated
+ I/O registers (without USART, TWI or SPI registers).
+- clocks: Should be the Flexcom peripheral clock from PMC.
+- #address-cells: Should be <1>
+- #size-cells: Should be <1>
+- ranges: Should be one range for the full I/O register region
+ (including USART, TWI and SPI registers).
+- atmel,flexcom-mode: Should be one of the following values:
+ - <1> for USART
+ - <2> for SPI
+ - <3> for I2C
+
+Required child:
+A single available child device of type matching the "atmel,flexcom-mode"
+property.
+
+The phandle provided by the clocks property of the child is the same as one for
+the Flexcom parent.
+
+For other properties, please refer to the documentations of the respective
+device:
+- ../serial/atmel-usart.txt
+- ../spi/spi_atmel.txt
+- ../i2c/i2c-at91.txt
+
+Example:
+
+flexcom@f8034000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xf8034000 0x200>;
+ clocks = <&flx0_clk>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8034000 0x800>;
+ atmel,flexcom-mode = <2>;
+
+ spi@400 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&flx0_clk>;
+ clock-names = "spi_clk";
+ atmel,fifo-size = <32>;
+
+ mtd_dataflash@0 {
+ compatible = "atmel,at25f512b";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
index ad5d90482..670831b29 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
@@ -15,7 +15,7 @@ Required properties:
The HLCDC IP exposes two subdevices:
- a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
- - a Display Controller: see ../drm/atmel-hlcdc-dc.txt
+ - a Display Controller: see ../display/atmel-hlcdc-dc.txt
Example:
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index 41811223e..a474359dd 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -60,8 +60,8 @@ DCDC2 : DC-DC buck : vin2-supply
DCDC3 : DC-DC buck : vin3-supply
DCDC4 : DC-DC buck : vin4-supply
DCDC5 : DC-DC buck : vin5-supply
-DC1SW : On/Off Switch : dcdc1-supply : DCDC1 secondary output
-DC5LDO : LDO : dcdc5-supply : input from DCDC5
+DC1SW : On/Off Switch : : DCDC1 secondary output
+DC5LDO : LDO : : input from DCDC5
ALDO1 : LDO : aldoin-supply : shared supply
ALDO2 : LDO : aldoin-supply : shared supply
ALDO3 : LDO : aldoin-supply : shared supply
diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt
index 1777916e9..136e0c2da 100644
--- a/Documentation/devicetree/bindings/mfd/cros-ec.txt
+++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt
@@ -34,6 +34,10 @@ Required properties (LPC):
- compatible: "google,cros-ec-lpc"
- reg: List of (IO address, size) pairs defining the interface uses
+Optional properties (all):
+- google,has-vbc-nvram: Some implementations of the EC include a small
+ nvram space used to store verified boot context data. This boolean flag
+ is used to specify whether this nvram is present or not.
Example for I2C:
diff --git a/Documentation/devicetree/bindings/mfd/da9150.txt b/Documentation/devicetree/bindings/mfd/da9150.txt
index d0588eaa0..fd4dca7f4 100644
--- a/Documentation/devicetree/bindings/mfd/da9150.txt
+++ b/Documentation/devicetree/bindings/mfd/da9150.txt
@@ -6,6 +6,7 @@ Device Description
------ -----------
da9150-gpadc : General Purpose ADC
da9150-charger : Battery Charger
+da9150-fg : Battery Fuel-Gauge
======
@@ -16,13 +17,13 @@ Required properties:
the IRQs from da9150 are delivered to.
- interrupts: IRQ line info for da9150 chip.
- interrupt-controller: da9150 has internal IRQs (own IRQ domain).
- (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+ (See ../interrupt-controller/interrupts.txt for
further information relating to interrupt properties)
Sub-devices:
-- da9150-gpadc: See Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt
-- da9150-charger: See Documentation/devicetree/bindings/power/da9150-charger.txt
-
+- da9150-gpadc: See ../iio/adc/da9150-gpadc.txt
+- da9150-charger: See ../power/da9150-charger.txt
+- da9150-fg: See ../power/da9150-fg.txt
Example:
@@ -34,10 +35,28 @@ Example:
interrupt-controller;
gpadc: da9150-gpadc {
- ...
+ compatible = "dlg,da9150-gpadc";
+ #io-channel-cells = <1>;
+ };
+
+ charger {
+ compatible = "dlg,da9150-charger";
+
+ io-channels = <&gpadc 0>,
+ <&gpadc 2>,
+ <&gpadc 8>,
+ <&gpadc 5>;
+ io-channel-names = "CHAN_IBUS",
+ "CHAN_VBUS",
+ "CHAN_TJUNC",
+ "CHAN_VBAT";
};
- da9150-charger {
- ...
+ fuel-gauge {
+ compatible = "dlg,da9150-fuel-gauge";
+
+ dlg,update-interval = <10000>;
+ dlg,warn-soc-level = /bits/ 8 <15>;
+ dlg,crit-soc-level = /bits/ 8 <5>
};
};
diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index 57a045016..09b94c97f 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@
-* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator
+* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator
The Samsung S2MPS11 is a multi-function device which includes voltage and
current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,17 +7,28 @@ interfaced to the host controller using an I2C interface. Each sub-block is
addressed by the host system using different I2C slave addresses.
Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic"
- or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic".
+- compatible: Should be one of the following
+ - "samsung,s2mps11-pmic"
+ - "samsung,s2mps13-pmic"
+ - "samsung,s2mps14-pmic"
+ - "samsung,s2mps15-pmic"
+ - "samsung,s2mpu02-pmic".
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
Optional properties:
- interrupt-parent: Specifies the phandle of the interrupt controller to which
the interrupts from s2mps11 are delivered to.
- interrupts: Interrupt specifiers for interrupt sources.
+- samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
+ down. When the system is suspended it will always go down thus triggerring
+ unwanted buck warm reset (setting buck voltages to default values).
+- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
+ connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
+ register to turn off the power. Usually the ACOKB is pulled up to VBATT so
+ when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
Optional nodes:
-- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
+- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768
KHz outputs, so to register these as clocks with common clock framework
instantiate a sub-node named "clocks". It uses the common clock binding
documented in :
@@ -30,12 +41,13 @@ Optional nodes:
the clock which they consume.
Clock ID Devices
----------------------------------------------------------
- 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S5M8767
- 32KhzCP 1 S2MPS11, S2MPS13, S5M8767
- 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S5M8767
+ 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767
+ 32KhzCP 1 S2MPS11, S2MPS13, S2MPS15, S5M8767
+ 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767
- compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
"samsung,s2mps14-clk", "samsung,s5m8767-clk"
+ The s2msp15 uses the same compatible as s2mps13, as both provides similar clocks.
- regulators: The regulators of s2mps11 that have to be instantiated should be
included in a sub-node named 'regulators'. Regulator nodes included in this
@@ -83,6 +95,7 @@ as per the datasheet of s2mps11.
- S2MPS11: 1 to 38
- S2MPS13: 1 to 40
- S2MPS14: 1 to 25
+ - S2MPS15: 1 to 27
- S2MPU02: 1 to 28
- Example: LDO1, LDO2, LDO28
- BUCKn
@@ -90,6 +103,7 @@ as per the datasheet of s2mps11.
- S2MPS11: 1 to 10
- S2MPS13: 1 to 10
- S2MPS14: 1 to 5
+ - S2MPS15: 1 to 10
- S2MPU02: 1 to 7
- Example: BUCK1, BUCK2, BUCK9
diff --git a/Documentation/devicetree/bindings/mfd/sky81452.txt b/Documentation/devicetree/bindings/mfd/sky81452.txt
index 35181794a..511764acd 100644
--- a/Documentation/devicetree/bindings/mfd/sky81452.txt
+++ b/Documentation/devicetree/bindings/mfd/sky81452.txt
@@ -6,7 +6,7 @@ Required properties:
Required child nodes:
- backlight : container node for backlight following the binding
- in video/backlight/sky81452-backlight.txt
+ in leds/backlight/sky81452-backlight.txt
- regulator : container node for regulators following the binding
in regulator/sky81452-regulator.txt
diff --git a/Documentation/devicetree/bindings/mfd/tc3589x.txt b/Documentation/devicetree/bindings/mfd/tc3589x.txt
index 37bf7f1aa..23fc2f21f 100644
--- a/Documentation/devicetree/bindings/mfd/tc3589x.txt
+++ b/Documentation/devicetree/bindings/mfd/tc3589x.txt
@@ -56,6 +56,7 @@ Optional nodes:
bindings/input/matrix-keymap.txt
- linux,no-autorepeat: do no enable autorepeat feature.
- wakeup-source: use any event on keypad as wakeup event.
+ (Legacy property supported: "linux,wakeup")
Example: