Linux-libre 4.2-gnu

7 files changed, 81 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
index 98ee2abbe..7e9490313 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
@@ -8,7 +8,8 @@ Device Tree Bindings for the Arasan SDHCI Controller
   [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 
 Required Properties:
-  - compatible: Compatibility string. Must be 'arasan,sdhci-8.9a'
+  - compatible: Compatibility string. Must be 'arasan,sdhci-8.9a' or
+                'arasan,sdhci-4.9a'
   - reg: From mmc bindings: Register location and length.
   - clocks: From clock bindings: Handles to clock inputs.
   - clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb"
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
index 415c5575c..211e7785f 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt
@@ -7,10 +7,16 @@ This file documents differences between the core properties described
 by mmc.txt and the properties used by the sdhci-esdhc-imx driver.
 
 Required properties:
-- compatible : Should be "fsl,<chip>-esdhc"
+- compatible : Should be "fsl,<chip>-esdhc", the supported chips include
+	       "fsl,imx25-esdhc"
+	       "fsl,imx35-esdhc"
+	       "fsl,imx51-esdhc"
+	       "fsl,imx53-esdhc"
+	       "fsl,imx6q-usdhc"
+	       "fsl,imx6sl-usdhc"
+	       "fsl,imx6sx-usdhc"
 
 Optional properties:
-- fsl,cd-controller : Indicate to use controller internal card detection
 - fsl,wp-controller : Indicate to use controller internal write protection
 - fsl,delay-line : Specify the number of delay cells for override mode.
   This is used to set the clock delay for DLL(Delay Line) on override mode
@@ -28,7 +34,6 @@ esdhc@70004000 {
 	compatible = "fsl,imx51-esdhc";
 	reg = <0x70004000 0x4000>;
 	interrupts = <1>;
-	fsl,cd-controller;
 	fsl,wp-controller;
 };
 
diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
index 3b3544931..df370585c 100644
--- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
@@ -13,6 +13,10 @@ Required Properties:
 
 * compatible: should be one of the following.
   - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions.
+  - "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions.
+
+Optional Properties:
+- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral.
 
 Example:
 
@@ -42,3 +46,27 @@ Example:
 		cap-mmc-highspeed;
 		cap-sd-highspeed;
 	};
+
+	/* for Hi6220 */
+
+	dwmmc_1: dwmmc1@f723e000 {
+		compatible = "hisilicon,hi6220-dw-mshc";
+		num-slots = <0x1>;
+		bus-width = <0x4>;
+		disable-wp;
+		cap-sd-highspeed;
+		sd-uhs-sdr12;
+		sd-uhs-sdr25;
+		card-detect-delay = <200>;
+		hisilicon,peripheral-syscon = <&ao_ctrl>;
+		reg = <0x0 0xf723e000 0x0 0x1000>;
+		interrupts = <0x0 0x49 0x4>;
+		clocks = <&clock_sys HI6220_MMC1_CIUCLK>, <&clock_sys HI6220_MMC1_CLK>;
+		clock-names = "ciu", "biu";
+		cd-gpios = <&gpio1 0 1>;
+		pinctrl-names = "default", "idle";
+		pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>;
+		pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>;
+		vqmmc-supply = <&ldo7>;
+		vmmc-supply = <&ldo10>;
+	};
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
index a462c50f1..ce0e76749 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
@@ -21,5 +21,7 @@ Example:
 
 	sdhci0_pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio1 12 0>;
+		reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_32768_ck>;
+		clock-names = "ext_clock";
 	}
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 438899e88..0384fc3f6 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -21,6 +21,11 @@ Optional properties:
   below for the case, when a GPIO is used for the CD line
 - wp-inverted: when present, polarity on the WP line is inverted. See the note
   below for the case, when a GPIO is used for the WP line
+- disable-wp: When set no physical WP line is present. This property should
+  only be specified when the controller has a dedicated write-protect
+  detection logic. If a GPIO is always used for the write-protect detection
+  logic it is sufficient to not specify wp-gpios property in the absence of a WP
+  line.
 - max-frequency: maximum operating clock frequency
 - no-1-8-v: when present, denotes that 1.8v card voltage is not supported on
   this system, even if the controller claims it is.
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
new file mode 100644
index 000000000..a1adfa495
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -0,0 +1,32 @@
+* MTK MMC controller
+
+The MTK  MSDC can act as a MMC controller
+to support MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the msdc driver.
+
+Required properties:
+- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
+- interrupts: Should contain MSDC interrupt number
+- clocks: MSDC source clock, HCLK
+- clock-names: "source", "hclk"
+- pinctrl-names: should be "default", "state_uhs"
+- pinctrl-0: should contain default/high speed pin ctrl
+- pinctrl-1: should contain uhs mode pin ctrl
+- vmmc-supply: power to the Core
+- vqmmc-supply: power to the IO
+
+Examples:
+mmc0: mmc@11230000 {
+	compatible = "mediatek,mt8173-mmc", "mediatek,mt8135-mmc";
+	reg = <0 0x11230000 0 0x108>;
+	interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
+	vmmc-supply = <&mt6397_vemc_3v3_reg>;
+	vqmmc-supply = <&mt6397_vio18_reg>;
+	clocks = <&pericfg CLK_PERI_MSDC30_0>, <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
+	clock-names = "source", "hclk";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
index 299081f94..d38942f6c 100644
--- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
+++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
@@ -18,6 +18,8 @@ Required properties:
   dma-names property.
 - dma-names: must contain "tx" for the transmit DMA channel and "rx" for the
   receive DMA channel.
+- max-frequency: Maximum operating clock frequency, driver uses default clock
+  frequency if it is not set.
 
 
 Example: R8A7790 (R-Car H2) MMCIF0
@@ -29,4 +31,5 @@ Example: R8A7790 (R-Car H2) MMCIF0
 		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
 		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
 		dma-names = "tx", "rx";
+		max-frequency = <97500000>;
 	};