diff options
author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-12-15 14:52:16 -0300 |
---|---|---|
committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-12-15 14:52:16 -0300 |
commit | 8d91c1e411f55d7ea91b1183a2e9f8088fb4d5be (patch) | |
tree | e9891aa6c295060d065adffd610c4f49ecf884f3 /Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt | |
parent | a71852147516bc1cb5b0b3cbd13639bfd4022dc8 (diff) |
Linux-libre 4.3.2-gnu
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 37 |
1 files changed, 36 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index 9462ab7dd..3c821cda1 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -48,7 +48,7 @@ Optional subnode-properties: Examples: -pinctrl@01c20800 { +pio: pinctrl@01c20800 { compatible = "allwinner,sun5i-a13-pinctrl"; reg = <0x01c20800 0x400>; #address-cells = <1>; @@ -68,3 +68,38 @@ pinctrl@01c20800 { allwinner,pull = <0>; }; }; + + +GPIO and interrupt controller +----------------------------- + +This hardware also acts as a GPIO controller and an interrupt +controller. + +Consumers that would want to refer to one or the other (or both) +should provide through the usual *-gpios and interrupts properties a +cell with 3 arguments, first the number of the bank, then the pin +inside that bank, and finally the flags for the GPIO/interrupts. + +Example: + +xio: gpio@38 { + compatible = "nxp,pcf8574a"; + reg = <0x38>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&pio>; + interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; +}; + +reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; +}; |