summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/remoteproc
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-09-08 01:01:14 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-09-08 01:01:14 -0300
commite5fd91f1ef340da553f7a79da9540c3db711c937 (patch)
treeb11842027dc6641da63f4bcc524f8678263304a3 /Documentation/devicetree/bindings/remoteproc
parent2a9b0348e685a63d97486f6749622b61e9e3292f (diff)
Linux-libre 4.2-gnu
Diffstat (limited to 'Documentation/devicetree/bindings/remoteproc')
-rw-r--r--Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt52
1 files changed, 52 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt b/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt
new file mode 100644
index 000000000..8aa3a5db5
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt
@@ -0,0 +1,52 @@
+TI Wakeup M3 Remoteproc Driver
+==============================
+
+The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor
+(commonly referred to as Wakeup M3 or CM3) to help with various low power tasks
+that cannot be controlled from the MPU. This CM3 processor requires a firmware
+binary to accomplish this. The wkup_m3 remoteproc driver handles the loading of
+the firmware and booting of the CM3.
+
+Wkup M3 Device Node:
+====================
+A wkup_m3 device node is used to represent the Wakeup M3 processor instance
+within the SoC. It is added as a child node of the parent interconnect bus
+(l4_wkup) through which it is accessible to the MPU.
+
+Required properties:
+--------------------
+- compatible: Should be one of,
+ "ti,am3352-wkup-m3" for AM33xx SoCs
+ "ti,am4372-wkup-m3" for AM43xx SoCs
+- reg: Should contain the address ranges for the two internal
+ memory regions, UMEM and DMEM. The parent node should
+ provide an appropriate ranges property for properly
+ translating these into bus addresses.
+- reg-names: Contains the corresponding names for the two memory
+ regions. These should be named "umem" & "dmem".
+- ti,hwmods: Name of the hwmod associated with the wkupm3 device.
+- ti,pm-firmware: Name of firmware file to be used for loading and
+ booting the wkup_m3 remote processor.
+
+Example:
+--------
+/* AM33xx */
+ocp {
+ l4_wkup: l4_wkup@44c00000 {
+ compatible = "am335-l4-wkup", "simple-bus";
+ ranges = <0 0x44c00000 0x400000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ wkup_m3: wkup_m3@100000 {
+ compatible = "ti,am3352-wkup-m3";
+ reg = <0x100000 0x4000>,
+ <0x180000 0x2000>;
+ reg-names = "umem", "dmem";
+ ti,hwmods = "wkup_m3";
+ ti,pm-firmware = "/*(DEBLOBBED)*/";
+ };
+ };
+
+ ...
+};