Initial import

1 files changed, 133 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
new file mode 100644
index 000000000..3da0ebdba
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
@@ -0,0 +1,133 @@
+*** Reserved memory regions ***
+
+Reserved memory is specified as a node under the /reserved-memory node.
+The operating system shall exclude reserved memory from normal usage
+one can create child nodes describing particular reserved (excluded from
+normal use) memory regions. Such memory regions are usually designed for
+the special usage by various device drivers.
+
+Parameters for each memory region can be encoded into the device tree
+with the following nodes:
+
+/reserved-memory node
+---------------------
+#address-cells, #size-cells (required) - standard definition
+    - Should use the same values as the root node
+ranges (required) - standard definition
+    - Should be empty
+
+/reserved-memory/ child nodes
+-----------------------------
+Each child of the reserved-memory node specifies one or more regions of
+reserved memory. Each child node may either use a 'reg' property to
+specify a specific range of reserved memory, or a 'size' property with
+optional constraints to request a dynamically allocated block of memory.
+
+Following the generic-names recommended practice, node names should
+reflect the purpose of the node (ie. "framebuffer" or "dma-pool"). Unit
+address (@<address>) should be appended to the name if the node is a
+static allocation.
+
+Properties:
+Requires either a) or b) below.
+a) static allocation
+   reg (required) - standard definition
+b) dynamic allocation
+   size (required) - length based on parent's #size-cells
+                   - Size in bytes of memory to reserve.
+   alignment (optional) - length based on parent's #size-cells
+                        - Address boundary for alignment of allocation.
+   alloc-ranges (optional) - prop-encoded-array (address, length pairs).
+                           - Specifies regions of memory that are
+                             acceptable to allocate from.
+
+If both reg and size are present, then the reg property takes precedence
+and size is ignored.
+
+Additional properties:
+compatible (optional) - standard definition
+    - may contain the following strings:
+        - shared-dma-pool: This indicates a region of memory meant to be
+          used as a shared pool of DMA buffers for a set of devices. It can
+          be used by an operating system to instanciate the necessary pool
+          management subsystem if necessary.
+        - vendor specific string in the form <vendor>,[<device>-]<usage>
+no-map (optional) - empty property
+    - Indicates the operating system must not create a virtual mapping
+      of the region as part of its standard mapping of system memory,
+      nor permit speculative access to it under any circumstances other
+      than under the control of the device driver using the region.
+reusable (optional) - empty property
+    - The operating system can use the memory in this region with the
+      limitation that the device driver(s) owning the region need to be
+      able to reclaim it back. Typically that means that the operating
+      system can use that region to store volatile or cached data that
+      can be otherwise regenerated or migrated elsewhere.
+
+Linux implementation note:
+- If a "linux,cma-default" property is present, then Linux will use the
+  region for the default pool of the contiguous memory allocator.
+
+Device node references to reserved memory
+-----------------------------------------
+Regions in the /reserved-memory node may be referenced by other device
+nodes by adding a memory-region property to the device node.
+
+memory-region (optional) - phandle, specifier pairs to children of /reserved-memory
+
+Example
+-------
+This example defines 3 contiguous regions are defined for Linux kernel:
+one default of all device drivers (named linux,cma@72000000 and 64MiB in size),
+one dedicated to the framebuffer device (named framebuffer@78000000, 8MiB), and
+one for multimedia processing (named multimedia-memory@77000000, 64MiB).
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x4000000>;
+			alignment = <0x2000>;
+			linux,cma-default;
+		};
+
+		display_reserved: framebuffer@78000000 {
+			reg = <0x78000000 0x800000>;
+		};
+
+		multimedia_reserved: multimedia@77000000 {
+			compatible = "acme,multimedia-memory";
+			reg = <0x77000000 0x4000000>;
+		};
+	};
+
+	/* ... */
+
+	fb0: video@12300000 {
+		memory-region = <&display_reserved>;
+		/* ... */
+	};
+
+	scaler: scaler@12500000 {
+		memory-region = <&multimedia_reserved>;
+		/* ... */
+	};
+
+	codec: codec@12600000 {
+		memory-region = <&multimedia_reserved>;
+		/* ... */
+	};
+};