diff options
author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2016-06-10 05:30:17 -0300 |
---|---|---|
committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2016-06-10 05:30:17 -0300 |
commit | d635711daa98be86d4c7fd01499c34f566b54ccb (patch) | |
tree | aa5cc3760a27c3d57146498cb82fa549547de06c /Documentation/devicetree/bindings/reset | |
parent | c91265cd0efb83778f015b4d4b1129bd2cfd075e (diff) |
Linux-libre 4.6.2-gnu
Diffstat (limited to 'Documentation/devicetree/bindings/reset')
-rw-r--r-- | Documentation/devicetree/bindings/reset/img,pistachio-reset.txt | 55 |
1 files changed, 55 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/reset/img,pistachio-reset.txt b/Documentation/devicetree/bindings/reset/img,pistachio-reset.txt new file mode 100644 index 000000000..8c05d1636 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/img,pistachio-reset.txt @@ -0,0 +1,55 @@ +Pistachio Reset Controller +============================================================================= + +This binding describes a reset controller device that is used to enable and +disable individual IP blocks within the Pistachio SoC using "soft reset" +control bits found in the Pistachio SoC top level registers. + +The actual action taken when soft reset is asserted is hardware dependent. +However, when asserted it may not be possible to access the hardware's +registers, and following an assert/deassert sequence the hardware's previous +state may no longer be valid. + +Please refer to Documentation/devicetree/bindings/reset/reset.txt +for common reset controller binding usage. + +Required properties: + +- compatible: Contains "img,pistachio-reset" + +- #reset-cells: Contains 1 + +Example: + + cr_periph: clk@18148000 { + compatible = "img,pistachio-cr-periph", "syscon", "simple-mfd"; + reg = <0x18148000 0x1000>; + clocks = <&clk_periph PERIPH_CLK_SYS>; + clock-names = "sys"; + #clock-cells = <1>; + + pistachio_reset: reset-controller { + compatible = "img,pistachio-reset"; + #reset-cells = <1>; + }; + }; + +Specifying reset control of devices +======================================= + +Device nodes should specify the reset channel required in their "resets" +property, containing a phandle to the pistachio reset device node and an +index specifying which reset to use, as described in +Documentation/devicetree/bindings/reset/reset.txt. + +Example: + + spdif_out: spdif-out@18100d00 { + ... + resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>; + reset-names = "rst"; + ... + }; + +Macro definitions for the supported resets can be found in: +include/dt-bindings/reset/pistachio-resets.h |