Linux-libre 4.4-gnupck-4.4-gnu

7 files changed, 121 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/rng/atmel-trng.txt b/Documentation/devicetree/bindings/rng/atmel-trng.txt
new file mode 100644
index 000000000..4ac5aaa2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/atmel-trng.txt
@@ -0,0 +1,16 @@
+Atmel TRNG (True Random Number Generator) block
+
+Required properties:
+- compatible : Should be "atmel,at91sam9g45-trng"
+- reg : Offset and length of the register set of this block
+- interrupts : the interrupt number for the TRNG block
+- clocks: should contain the TRNG clk source
+
+Example:
+
+trng@fffcc000 {
+	compatible = "atmel,at91sam9g45-trng";
+	reg = <0xfffcc000 0x4000>;
+	interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+	clocks = <&trng_clk>;
+};
diff --git a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt
new file mode 100644
index 000000000..e25a45666
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt
@@ -0,0 +1,12 @@
+HWRNG support for the iproc-rng200 driver
+
+Required properties:
+- compatible : "brcm,iproc-rng200"
+- reg : base address and size of control register block
+
+Example:
+
+rng {
+        compatible = "brcm,iproc-rng200";
+        reg = <0x18032000 0x28>;
+};
diff --git a/Documentation/devicetree/bindings/rng/omap_rng.txt b/Documentation/devicetree/bindings/rng/omap_rng.txt
new file mode 100644
index 000000000..6a62acd86
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/omap_rng.txt
@@ -0,0 +1,22 @@
+OMAP SoC HWRNG Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+  RNG versions:
+  - "ti,omap2-rng" for OMAP2.
+  - "ti,omap4-rng" for OMAP4, OMAP5 and AM33XX.
+  Note that these two versions are incompatible.
+- ti,hwmods: Name of the hwmod associated with the RNG module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt number for the RNG module.
+		Only used for "ti,omap4-rng".
+
+Example:
+/* AM335x */
+rng: rng@48310000 {
+	compatible = "ti,omap4-rng";
+	ti,hwmods = "rng";
+	reg = <0x48310000 0x2000>;
+	interrupts = <111>;
+};
diff --git a/Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt b/Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt
new file mode 100644
index 000000000..4ca8dd4d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt
@@ -0,0 +1,17 @@
+Exynos Pseudo Random Number Generator
+
+Required properties:
+
+- compatible  : Should be "samsung,exynos4-rng".
+- reg         : Specifies base physical address and size of the registers map.
+- clocks      : Phandle to clock-controller plus clock-specifier pair.
+- clock-names : "secss" as a clock name.
+
+Example:
+
+	rng@10830400 {
+		compatible = "samsung,exynos4-rng";
+		reg = <0x10830400 0x200>;
+		clocks = <&clock CLK_SSS>;
+		clock-names = "secss";
+	};
diff --git a/Documentation/devicetree/bindings/rng/st,rng.txt b/Documentation/devicetree/bindings/rng/st,rng.txt
new file mode 100644
index 000000000..35734bc28
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/st,rng.txt
@@ -0,0 +1,15 @@
+STMicroelectronics HW Random Number Generator
+----------------------------------------------
+
+Required parameters:
+compatible	: Should be "st,rng"
+reg		: Base address and size of IP's register map.
+clocks		: Phandle to device's clock (See: ../clocks/clock-bindings.txt)
+
+Example:
+
+rng@fee80000 {
+	compatible      = "st,rng";
+	reg		= <0xfee80000 0x1000>;
+	clocks          = <&clk_sysin>;
+}
diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.txt b/Documentation/devicetree/bindings/rng/st,stm32-rng.txt
new file mode 100644
index 000000000..47f04176f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.txt
@@ -0,0 +1,21 @@
+STMicroelectronics STM32 HW RNG
+===============================
+
+The STM32 hardware random number generator is a simple fixed purpose IP and
+is fully separated from other crypto functions.
+
+Required properties:
+
+- compatible : Should be "st,stm32-rng"
+- reg : Should be register base and length as documented in the datasheet
+- interrupts : The designated IRQ line for the RNG
+- clocks : The clock needed to enable the RNG
+
+Example:
+
+	rng: rng@50060800 {
+		compatible = "st,stm32-rng";
+		reg = <0x50060800 0x400>;
+		interrupts = <80>;
+		clocks = <&rcc 0 38>;
+	};
diff --git a/Documentation/devicetree/bindings/rng/timeriomem_rng.txt b/Documentation/devicetree/bindings/rng/timeriomem_rng.txt
new file mode 100644
index 000000000..6616d1586
--- /dev/null
+++ b/Documentation/devicetree/bindings/rng/timeriomem_rng.txt
@@ -0,0 +1,18 @@
+HWRNG support for the timeriomem_rng driver
+
+Required properties:
+- compatible : "timeriomem_rng"
+- reg : base address to sample from
+- period : wait time in microseconds to use between samples
+
+N.B. currently 'reg' must be four bytes wide and aligned
+
+Example:
+
+hwrng@44 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "timeriomem_rng";
+	reg = <0x44 0x04>;
+	period = <1000000>;
+};