summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/rtc
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-09-11 04:34:46 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-09-11 04:34:46 -0300
commit863981e96738983919de841ec669e157e6bdaeb0 (patch)
treed6d89a12e7eb8017837c057935a2271290907f76 /Documentation/devicetree/bindings/rtc
parent8dec7c70575785729a6a9e6719a955e9c545bcab (diff)
Linux-libre 4.7.1-gnupck-4.7.1-gnu
Diffstat (limited to 'Documentation/devicetree/bindings/rtc')
-rw-r--r--Documentation/devicetree/bindings/rtc/maxim-ds1302.txt46
-rw-r--r--Documentation/devicetree/bindings/rtc/rtc-palmas.txt6
-rw-r--r--Documentation/devicetree/bindings/rtc/sa1100-rtc.txt2
3 files changed, 50 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt b/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt
new file mode 100644
index 000000000..ba470c56c
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/maxim-ds1302.txt
@@ -0,0 +1,46 @@
+* Maxim/Dallas Semiconductor DS-1302 RTC
+
+Simple device which could be used to store date/time between reboots.
+
+The device uses the standard MicroWire half-duplex transfer timing.
+Master output is set on low clock and sensed by the RTC on the rising
+edge. Master input is set by the RTC on the trailing edge and is sensed
+by the master on low clock.
+
+Required properties:
+
+- compatible : Should be "maxim,ds1302"
+
+Required SPI properties:
+
+- reg : Should be address of the device chip select within
+ the controller.
+
+- spi-max-frequency : DS-1302 has 500 kHz if powered at 2.2V,
+ and 2MHz if powered at 5V.
+
+- spi-3wire : The device has a shared signal IN/OUT line.
+
+- spi-lsb-first : DS-1302 requires least significant bit first
+ transfers.
+
+- spi-cs-high: DS-1302 has active high chip select line. This is
+ required unless inverted in hardware.
+
+Example:
+
+spi@901c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "icpdas,lp8841-spi-rtc";
+ reg = <0x901c 0x1>;
+
+ rtc@0 {
+ compatible = "maxim,ds1302";
+ reg = <0>;
+ spi-max-frequency = <500000>;
+ spi-3wire;
+ spi-lsb-first;
+ spi-cs-high;
+ };
+};
diff --git a/Documentation/devicetree/bindings/rtc/rtc-palmas.txt b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
index adbccc0a5..eb1c7fdeb 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
@@ -15,9 +15,9 @@ Optional properties:
battery is chargeable or not. If charging battery then driver can
enable the charging.
- ti,backup-battery-charge-high-current: Enable high current charging in
- backup battery. Device supports the < 100mA and > 100mA charging.
- The high current will be > 100mA. Absence of this property will
- charge battery to lower current i.e. < 100mA.
+ backup battery. Device supports the < 100uA and > 100uA charging.
+ The high current will be > 100uA. Absence of this property will
+ charge battery to lower current i.e. < 100uA.
Example:
palmas: tps65913@58 {
diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
index 0cda19ad4..968ac8202 100644
--- a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
@@ -13,5 +13,5 @@ Example:
compatible = "mrvl,mmp-rtc";
reg = <0xd4010000 0x1000>;
interrupts = <5>, <6>;
- interrupt-name = "rtc 1Hz", "rtc alarm";
+ interrupt-names = "rtc 1Hz", "rtc alarm";
};