Linux-libre 4.8.2-gnupck-4.8.2-gnu

4 files changed, 11 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
index caaeb2583..07013fa60 100644
--- a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
+++ b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
@@ -1,7 +1,7 @@
 * Cirrus Logic CLPS711X Universal Asynchronous Receiver/Transmitter (UART)
 
 Required properties:
-- compatible: Should be "cirrus,clps711x-uart".
+- compatible: Should be "cirrus,ep7209-uart".
 - reg: Address and length of the register set for the device.
 - interrupts: Should contain UART TX and RX interrupt.
 - clocks: Should contain UART core clock number.
@@ -20,7 +20,7 @@ Example:
 	};
 
 	uart1: uart@80000480 {
-		compatible = "cirrus,clps711x-uart";
+		compatible = "cirrus,ep7312-uart","cirrus,ep7209-uart";
 		reg = <0x80000480 0x80>;
 		interrupts = <12 13>;
 		clocks = <&clks 11>;
diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index e99e10ab9..0015c722b 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -6,6 +6,7 @@ Required properties:
   * "mediatek,mt6580-uart" for MT6580 compatible UARTS
   * "mediatek,mt6582-uart" for MT6582 compatible UARTS
   * "mediatek,mt6589-uart" for MT6589 compatible UARTS
+  * "mediatek,mt6755-uart" for MT6755 compatible UARTS
   * "mediatek,mt6795-uart" for MT6795 compatible UARTS
   * "mediatek,mt7623-uart" for MT7623 compatible UARTS
   * "mediatek,mt8127-uart" for MT8127 compatible UARTS
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
index 182777fac..d5f73b8f6 100644
--- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
@@ -28,10 +28,10 @@ Optional properties:
 - dma-names: Should contain "tx" for transmit and "rx" for receive channels
 - qcom,tx-crci: Identificator <u32> for Client Rate Control Interface to be
            used with TX DMA channel. Required when using DMA for transmission
-           with UARTDM v1.3 and bellow.
+           with UARTDM v1.3 and below.
 - qcom,rx-crci: Identificator <u32> for Client Rate Control Interface to be
            used with RX DMA channel. Required when using DMA for reception
-           with UARTDM v1.3 and bellow.
+           with UARTDM v1.3 and below.
 
 Note: Aliases may be defined to ensure the correct ordering of the UARTs.
 The alias serialN will result in the UART being assigned port N.  If any
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index 528c3b90f..1e4000d83 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -31,6 +31,8 @@ Required properties:
     - "renesas,hscif-r8a7794" for R8A7794 (R-Car E2) HSCIF compatible UART.
     - "renesas,scif-r8a7795" for R8A7795 (R-Car H3) SCIF compatible UART.
     - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
+    - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
+    - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
     - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
     - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
     - "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART,
@@ -76,6 +78,10 @@ Optional properties:
   - dmas: Must contain a list of two references to DMA specifiers, one for
 	  transmission, and one for reception.
   - dma-names: Must contain a list of two DMA names, "tx" and "rx".
+  - {cts,dsr,dcd,rng,rts,dtr}-gpios: Specify GPIOs for modem lines, cfr. the
+    generic serial DT bindings in serial.txt.
+  - uart-has-rtscts: Indicates dedicated lines for RTS/CTS hardware flow
+    control, cfr. the generic serial DT bindings in serial.txt.
 
 Example:
 	aliases {