summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/soc
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /Documentation/devicetree/bindings/soc
Initial import
Diffstat (limited to 'Documentation/devicetree/bindings/soc')
-rw-r--r--Documentation/devicetree/bindings/soc/fsl/bman-portals.txt56
-rw-r--r--Documentation/devicetree/bindings/soc/fsl/bman.txt135
-rw-r--r--Documentation/devicetree/bindings/soc/fsl/qman-portals.txt154
-rw-r--r--Documentation/devicetree/bindings/soc/fsl/qman.txt175
-rw-r--r--Documentation/devicetree/bindings/soc/mediatek/pwrap.txt58
-rw-r--r--Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt88
-rw-r--r--Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt111
-rw-r--r--Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt232
8 files changed, 1009 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt
new file mode 100644
index 000000000..2a00e14e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt
@@ -0,0 +1,56 @@
+QorIQ DPAA Buffer Manager Portals Device Tree Binding
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+ - BMan Portal
+ - Example
+
+BMan Portal Node
+
+Portals are memory mapped interfaces to BMan that allow low-latency, lock-less
+interaction by software running on processor cores, accelerators and network
+interfaces with the BMan
+
+PROPERTIES
+
+- compatible
+ Usage: Required
+ Value type: <stringlist>
+ Definition: Must include "fsl,bman-portal-<hardware revision>"
+ May include "fsl,<SoC>-bman-portal" or "fsl,bman-portal"
+
+- reg
+ Usage: Required
+ Value type: <prop-encoded-array>
+ Definition: Two regions. The first is the cache-enabled region of
+ the portal. The second is the cache-inhibited region of
+ the portal
+
+- interrupts
+ Usage: Required
+ Value type: <prop-encoded-array>
+ Definition: Standard property
+
+EXAMPLE
+
+The example below shows a (P4080) BMan portals container/bus node with two portals
+
+ bman-portals@ff4000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0xf 0xf4000000 0x200000>;
+
+ bman-portal@0 {
+ compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
+ reg = <0x0 0x4000>, <0x100000 0x1000>;
+ interrupts = <105 2 0 0>;
+ };
+ bman-portal@4000 {
+ compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
+ reg = <0x4000 0x4000>, <0x101000 0x1000>;
+ interrupts = <107 2 0 0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt
new file mode 100644
index 000000000..47ac83441
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/bman.txt
@@ -0,0 +1,135 @@
+QorIQ DPAA Buffer Manager Device Tree Bindings
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+ - BMan Node
+ - BMan Private Memory Node
+ - Example
+
+BMan Node
+
+The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA).
+BMan supports hardware allocation and deallocation of buffers belonging to pools
+originally created by software with configurable depletion thresholds. This
+binding covers the CCSR space programming model
+
+PROPERTIES
+
+- compatible
+ Usage: Required
+ Value type: <stringlist>
+ Definition: Must include "fsl,bman"
+ May include "fsl,<SoC>-bman"
+
+- reg
+ Usage: Required
+ Value type: <prop-encoded-array>
+ Definition: Registers region within the CCSR address space
+
+The BMan revision information is located in the BMAN_IP_REV_1/2 registers which
+are located at offsets 0xbf8 and 0xbfc
+
+- interrupts
+ Usage: Required
+ Value type: <prop-encoded-array>
+ Definition: Standard property. The error interrupt
+
+- fsl,bman-portals
+ Usage: Required
+ Value type: <phandle>
+ Definition: Phandle to this BMan instance's portals
+
+- fsl,liodn
+ Usage: See pamu.txt
+ Value type: <prop-encoded-array>
+ Definition: PAMU property used for static LIODN assignment
+
+- fsl,iommu-parent
+ Usage: See pamu.txt
+ Value type: <phandle>
+ Definition: PAMU property used for dynamic LIODN assignment
+
+ For additional details about the PAMU/LIODN binding(s) see pamu.txt
+
+Devices connected to a BMan instance via Direct Connect Portals (DCP) must link
+to the respective BMan instance
+
+- fsl,bman
+ Usage: Required
+ Value type: <prop-encoded-array>
+ Description: List of phandle and DCP index pairs, to the BMan instance
+ to which this device is connected via the DCP
+
+BMan Private Memory Node
+
+BMan requires a contiguous range of physical memory used for the backing store
+for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as a
+node under the /reserved-memory node
+
+The BMan FBPR memory node must be named "bman-fbpr"
+
+PROPERTIES
+
+- compatible
+ Usage: required
+ Value type: <stringlist>
+ Definition: Must inclide "fsl,bman-fbpr"
+
+The following constraints are relevant to the FBPR private memory:
+ - The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to
+ 16 GiB
+ - The alignment must be a muliptle of the memory size
+
+The size of the FBPR must be chosen by observing the hardware features configured
+via the Reset Configuration Word (RCW) and that are relevant to a specific board
+(e.g. number of MAC(s) pinned-out, number of offline/host command FMan ports,
+etc.). The size configured in the DT must reflect the hardware capabilities and
+not the specific needs of an application
+
+For additional details about reserved memory regions see reserved-memory.txt
+
+EXAMPLE
+
+The example below shows a BMan FBPR dynamic allocation memory node
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ bman_fbpr: bman-fbpr {
+ compatible = "fsl,bman-fbpr";
+ alloc-ranges = <0 0 0x10 0>;
+ size = <0 0x1000000>;
+ alignment = <0 0x1000000>;
+ };
+ };
+
+The example below shows a (P4080) BMan CCSR-space node
+
+ bportals: bman-portals@ff4000000 {
+ ...
+ };
+
+ crypto@300000 {
+ ...
+ fsl,bman = <&bman, 2>;
+ ...
+ };
+
+ bman: bman@31a000 {
+ compatible = "fsl,bman";
+ reg = <0x31a000 0x1000>;
+ interrupts = <16 2 1 2>;
+ fsl,liodn = <0x17>;
+ fsl,bman-portals = <&bportals>;
+ memory-region = <&bman_fbpr>;
+ };
+
+ fman@400000 {
+ ...
+ fsl,bman = <&bman, 0>;
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
new file mode 100644
index 000000000..48c4dae5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
@@ -0,0 +1,154 @@
+QorIQ DPAA Queue Manager Portals Device Tree Binding
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+ - QMan Portal
+ - QMan Pool Channel
+ - Example
+
+QMan Portal Node
+
+Portals are memory mapped interfaces to QMan that allow low-latency, lock-less
+interaction by software running on processor cores, accelerators and network
+interfaces with the QMan
+
+PROPERTIES
+
+- compatible
+ Usage: Required
+ Value type: <stringlist>
+ Definition: Must include "fsl,qman-portal-<hardware revision>"
+ May include "fsl,<SoC>-qman-portal" or "fsl,qman-portal"
+
+- reg
+ Usage: Required
+ Value type: <prop-encoded-array>
+ Definition: Two regions. The first is the cache-enabled region of
+ the portal. The second is the cache-inhibited region of
+ the portal
+
+- interrupts
+ Usage: Required
+ Value type: <prop-encoded-array>
+ Definition: Standard property
+
+- fsl,liodn
+ Usage: See pamu.txt
+ Value type: <prop-encoded-array>
+ Definition: Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN
+ (FLIODN)
+
+- fsl,iommu-parent
+ Usage: See pamu.txt
+ Value type: <phandle>
+ Definition: PAMU property used for dynamic LIODN assignment
+
+ For additional details about the PAMU/LIODN binding(s) see pamu.txt
+
+- fsl,qman-channel-id
+ Usage: Required
+ Value type: <u32>
+ Definition: The hardware index of the channel. This can also be
+ determined by dividing any of the channel's 8 work queue
+ IDs by 8
+
+In addition to these properties the qman-portals should have sub-nodes to
+represent the HW devices/portals that are connected to the software portal
+described here
+
+The currently supported sub-nodes are:
+ * fman0
+ * fman1
+ * pme
+ * crypto
+
+These subnodes should have the following properties:
+
+- fsl,liodn
+ Usage: See pamu.txt
+ Value type: <prop-encoded-array>
+ Definition: PAMU property used for static LIODN assignment
+
+- fsl,iommu-parent
+ Usage: See pamu.txt
+ Value type: <phandle>
+ Definition: PAMU property used for dynamic LIODN assignment
+
+- dev-handle
+ Usage: Required
+ Value type: <phandle>
+ Definition: The phandle to the particular hardware device that this
+ portal is connected to.
+
+DPAA QMan Pool Channel Nodes
+
+Pool Channels are defined with the following properties.
+
+PROPERTIES
+
+- compatible
+ Usage: Required
+ Value type: <stringlist>
+ Definition: Must include "fsl,qman-pool-channel"
+ May include "fsl,<SoC>-qman-pool-channel"
+
+- fsl,qman-channel-id
+ Usage: Required
+ Value type: <u32>
+ Definition: The hardware index of the channel. This can also be
+ determined by dividing any of the channel's 8 work queue
+ IDs by 8
+
+EXAMPLE
+
+The example below shows a (P4080) QMan portals container/bus node with two portals
+
+ qman-portals@ff4200000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0xf 0xf4200000 0x200000>;
+
+ qman-portal@0 {
+ compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
+ reg = <0 0x4000>, <0x100000 0x1000>;
+ interrupts = <104 2 0 0>;
+ fsl,liodn = <1 2>;
+ fsl,qman-channel-id = <0>;
+
+ fman0 {
+ fsl,liodn = <0x21>;
+ dev-handle = <&fman0>;
+ };
+ fman1 {
+ fsl,liodn = <0xa1>;
+ dev-handle = <&fman1>;
+ };
+ crypto {
+ fsl,liodn = <0x41 0x66>;
+ dev-handle = <&crypto>;
+ };
+ };
+ qman-portal@4000 {
+ compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
+ reg = <0x4000 0x4000>, <0x101000 0x1000>;
+ interrupts = <106 2 0 0>;
+ fsl,liodn = <3 4>;
+ fsl,qman-channel-id = <1>;
+
+ fman0 {
+ fsl,liodn = <0x22>;
+ dev-handle = <&fman0>;
+ };
+ fman1 {
+ fsl,liodn = <0xa2>;
+ dev-handle = <&fman1>;
+ };
+ crypto {
+ fsl,liodn = <0x42 0x67>;
+ dev-handle = <&crypto>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt
new file mode 100644
index 000000000..556ebb8be
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/qman.txt
@@ -0,0 +1,175 @@
+QorIQ DPAA Queue Manager Device Tree Binding
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+ - QMan Node
+ - QMan Private Memory Nodes
+ - Example
+
+QMan Node
+
+The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan
+supports queuing and QoS scheduling of frames to CPUs, network interfaces and
+DPAA logic modules, maintains packet ordering within flows. Besides providing
+flow-level queuing, is also responsible for congestion management functions such
+as RED/WRED, congestion notifications and tail discards. This binding covers the
+CCSR space programming model
+
+PROPERTIES
+
+- compatible
+ Usage: Required
+ Value type: <stringlist>
+ Definition: Must include "fsl,qman"
+ May include "fsl,<SoC>-qman"
+
+- reg
+ Usage: Required
+ Value type: <prop-encoded-array>
+ Definition: Registers region within the CCSR address space
+
+The QMan revision information is located in the QMAN_IP_REV_1/2 registers which
+are located at offsets 0xbf8 and 0xbfc
+
+- interrupts
+ Usage: Required
+ Value type: <prop-encoded-array>
+ Definition: Standard property. The error interrupt
+
+- fsl,qman-portals
+ Usage: Required
+ Value type: <phandle>
+ Definition: Phandle to this QMan instance's portals
+
+- fsl,liodn
+ Usage: See pamu.txt
+ Value type: <prop-encoded-array>
+ Definition: PAMU property used for static LIODN assignment
+
+- fsl,iommu-parent
+ Usage: See pamu.txt
+ Value type: <phandle>
+ Definition: PAMU property used for dynamic LIODN assignment
+
+ For additional details about the PAMU/LIODN binding(s) see pamu.txt
+
+- clocks
+ Usage: See clock-bindings.txt and qoriq-clock.txt
+ Value type: <prop-encoded-array>
+ Definition: Reference input clock. Its frequency is half of the
+ platform clock
+
+Devices connected to a QMan instance via Direct Connect Portals (DCP) must link
+to the respective QMan instance
+
+- fsl,qman
+ Usage: Required
+ Value type: <prop-encoded-array>
+ Description: List of phandle and DCP index pairs, to the QMan instance
+ to which this device is connected via the DCP
+
+QMan Private Memory Nodes
+
+QMan requires two contiguous range of physical memory used for the backing store
+for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
+This memory is reserved/allocated as a nodes under the /reserved-memory node
+
+The QMan FQD memory node must be named "qman-fqd"
+
+PROPERTIES
+
+- compatible
+ Usage: required
+ Value type: <stringlist>
+ Definition: Must inclide "fsl,qman-fqd"
+
+The QMan PFDR memory node must be named "qman-pfdr"
+
+PROPERTIES
+
+- compatible
+ Usage: required
+ Value type: <stringlist>
+ Definition: Must inclide "fsl,qman-pfdr"
+
+The following constraints are relevant to the FQD and PFDR private memory:
+ - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
+ 1 GiB
+ - The alignment must be a muliptle of the memory size
+
+The size of the FQD and PFDP must be chosen by observing the hardware features
+configured via the Reset Configuration Word (RCW) and that are relevant to a
+specific board (e.g. number of MAC(s) pinned-out, number of offline/host command
+FMan ports, etc.). The size configured in the DT must reflect the hardware
+capabilities and not the specific needs of an application
+
+For additional details about reserved memory regions see reserved-memory.txt
+
+EXAMPLE
+
+The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ qman_fqd: qman-fqd {
+ compatible = "fsl,qman-fqd";
+ alloc-ranges = <0 0 0x10 0>;
+ size = <0 0x400000>;
+ alignment = <0 0x400000>;
+ };
+ qman_pfdr: qman-pfdr {
+ compatible = "fsl,qman-pfdr";
+ alloc-ranges = <0 0 0x10 0>;
+ size = <0 0x2000000>;
+ alignment = <0 0x2000000>;
+ };
+ };
+
+The example below shows a (P4080) QMan CCSR-space node
+
+ qportals: qman-portals@ff4200000 {
+ ...
+ };
+
+ clockgen: global-utilities@e1000 {
+ ...
+ sysclk: sysclk {
+ ...
+ };
+ ...
+ platform_pll: platform-pll@c00 {
+ #clock-cells = <1>;
+ reg = <0xc00 0x4>;
+ compatible = "fsl,qoriq-platform-pll-1.0";
+ clocks = <&sysclk>;
+ clock-output-names = "platform-pll", "platform-pll-div2";
+ };
+ ...
+ };
+
+ crypto@300000 {
+ ...
+ fsl,qman = <&qman, 2>;
+ ...
+ };
+
+ qman: qman@318000 {
+ compatible = "fsl,qman";
+ reg = <0x318000 0x1000>;
+ interrupts = <16 2 1 3>
+ fsl,liodn = <0x16>;
+ fsl,qman-portals = <&qportals>;
+ memory-region = <&qman_fqd &qman_pfdr>;
+ clocks = <&platform_pll 1>;
+ };
+
+ fman@400000 {
+ ...
+ fsl,qman = <&qman, 0>;
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
new file mode 100644
index 000000000..ddeb5b6a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
@@ -0,0 +1,58 @@
+MediaTek PMIC Wrapper Driver
+
+This document describes the binding for the MediaTek PMIC wrapper.
+
+On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
+is not directly visible to the CPU, but only through the PMIC wrapper
+inside the SoC. The communication between the SoC and the PMIC can
+optionally be encrypted. Also a non standard Dual IO SPI mode can be
+used to increase speed.
+
+IP Pairing
+
+on MT8135 the pins of some SoC internal peripherals can be on the PMIC.
+The signals of these pins are routed over the SPI bus using the pwrap
+bridge. In the binding description below the properties needed for bridging
+are marked with "IP Pairing". These are optional on SoCs which do not support
+IP Pairing
+
+Required properties in pwrap device node.
+- compatible:
+ "mediatek,mt8135-pwrap" for MT8135 SoCs
+ "mediatek,mt8173-pwrap" for MT8173 SoCs
+- interrupts: IRQ for pwrap in SOC
+- reg-names: Must include the following entries:
+ "pwrap": Main registers base
+ "pwrap-bridge": bridge base (IP Pairing)
+- reg: Must contain an entry for each entry in reg-names.
+- reset-names: Must include the following entries:
+ "pwrap"
+ "pwrap-bridge" (IP Pairing)
+- resets: Must contain an entry for each entry in reset-names.
+- clock-names: Must include the following entries:
+ "spi": SPI bus clock
+ "wrap": Main module clock
+- clocks: Must contain an entry for each entry in clock-names.
+
+Optional properities:
+- pmic: Mediatek PMIC MFD is the child device of pwrap
+ See the following for child node definitions:
+ Documentation/devicetree/bindings/mfd/mt6397.txt
+
+Example:
+ pwrap: pwrap@1000f000 {
+ compatible = "mediatek,mt8135-pwrap";
+ reg = <0 0x1000f000 0 0x1000>,
+ <0 0x11017000 0 0x1000>;
+ reg-names = "pwrap", "pwrap-bridge";
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+ <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+ reset-names = "pwrap", "pwrap-bridge";
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "spi", "wrap";
+
+ pmic {
+ compatible = "mediatek,mt6397";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
new file mode 100644
index 000000000..2f5ede39b
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
@@ -0,0 +1,88 @@
+QCOM GSBI (General Serial Bus Interface) Driver
+
+The GSBI controller is modeled as a node with zero or more child nodes, each
+representing a serial sub-node device that is mux'd as part of the GSBI
+configuration settings. The mode setting will govern the input/output mode of
+the 4 GSBI IOs.
+
+Required properties:
+- compatible: Should contain "qcom,gsbi-v1.0.0"
+- cell-index: Should contain the GSBI index
+- reg: Address range for GSBI registers
+- clocks: required clock
+- clock-names: must contain "iface" entry
+- qcom,mode : indicates MUX value for configuration of the serial interface.
+ Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values.
+
+Optional properties:
+- qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference
+ dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
+- syscon-tcsr: indicates phandle of TCSR syscon node. Required if child uses
+ dma.
+
+Required properties if child node exists:
+- #address-cells: Must be 1
+- #size-cells: Must be 1
+- ranges: Must be present
+
+Properties for children:
+
+A GSBI controller node can contain 0 or more child nodes representing serial
+devices. These serial devices can be a QCOM UART, I2C controller, spi
+controller, or some combination of aforementioned devices.
+
+See the following for child node definitions:
+Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
+Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
+
+Example for APQ8064:
+
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+ gsbi4@16300000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <4>;
+ reg = <0x16300000 0x100>;
+ clocks = <&gcc GSBI4_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ qcom,crci = <GSBI_CRCI_QUP>;
+
+ syscon-tcsr = <&tcsr>;
+
+ /* child nodes go under here */
+
+ i2c_qup4: i2c@16380000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16380000 0x1000>;
+ interrupts = <0 153 0>;
+
+ clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
+ clock-names = "core", "iface";
+
+ clock-frequency = <200000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ };
+
+ uart4: serial@16340000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16340000 0x1000>,
+ <0x16300000 0x1000>;
+ interrupts = <0 152 0x0>;
+ clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+ clock-names = "core", "iface";
+ status = "ok";
+ };
+ };
+
+ tcsr: syscon@1a400000 {
+ compatible = "qcom,apq8064-tcsr", "syscon";
+ reg = <0x1a400000 0x100>;
+ };
diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt
new file mode 100644
index 000000000..337c4ea5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt
@@ -0,0 +1,111 @@
+Keystone Navigator DMA Controller
+
+This document explains the device tree bindings for the packet dma
+on keystone devices. The Keystone Navigator DMA driver sets up the dma
+channels and flows for the QMSS(Queue Manager SubSystem) who triggers
+the actual data movements across clients using destination queues. Every
+client modules like NETCP(Network Coprocessor), SRIO(Serial Rapid IO),
+CRYPTO Engines etc has its own instance of dma hardware. QMSS has also
+an internal packet DMA module which is used as an infrastructure DMA
+with zero copy.
+
+Navigator DMA cloud layout:
+ ------------------
+ | Navigator DMAs |
+ ------------------
+ |
+ |-> DMA instance #0
+ |
+ |-> DMA instance #1
+ .
+ .
+ |
+ |-> DMA instance #n
+
+Navigator DMA properties:
+Required properties:
+ - compatible: Should be "ti,keystone-navigator-dma"
+ - clocks: phandle to dma instances clocks. The clock handles can be as
+ many as the dma instances. The order should be maintained as per
+ the dma instances.
+ - ti,navigator-cloud-address: Should contain base address for the multi-core
+ navigator cloud and number of addresses depends on SOC integration
+ configuration.. Navigator cloud global address needs to be programmed
+ into DMA and the DMA uses it as the physical addresses to reach queue
+ managers. Note that these addresses though points to queue managers,
+ they are relevant only from DMA perspective. The QMSS may not choose to
+ use them since it has a different address space view to reach all
+ its components.
+
+DMA instance properties:
+Required properties:
+ - reg: Should contain register location and length of the following dma
+ register regions. Register regions should be specified in the following
+ order.
+ - Global control register region (global).
+ - Tx DMA channel configuration register region (txchan).
+ - Rx DMA channel configuration register region (rxchan).
+ - Tx DMA channel Scheduler configuration register region (txsched).
+ - Rx DMA flow configuration register region (rxflow).
+
+Optional properties:
+ - reg-names: Names for the register regions.
+ - ti,enable-all: Enable all DMA channels vs clients opening specific channels
+ what they need. This property is useful for the userspace fast path
+ case where the linux drivers enables the channels used by userland
+ stack.
+ - ti,loop-back: To loopback Tx streaming I/F to Rx streaming I/F. Used for
+ infrastructure transfers.
+ - ti,rx-retry-timeout: Number of dma cycles to wait before retry on buffer
+ starvation.
+
+Example:
+
+ knav_dmas: knav_dmas@0 {
+ compatible = "ti,keystone-navigator-dma";
+ clocks = <&papllclk>, <&clkxge>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,navigator-cloud-address = <0x23a80000 0x23a90000
+ 0x23aa0000 0x23ab0000>;
+
+ dma_gbe: dma_gbe@0 {
+ reg = <0x2004000 0x100>,
+ <0x2004400 0x120>,
+ <0x2004800 0x300>,
+ <0x2004c00 0x120>,
+ <0x2005000 0x400>;
+ reg-names = "global", "txchan", "rxchan",
+ "txsched", "rxflow";
+ };
+
+ dma_xgbe: dma_xgbe@0 {
+ reg = <0x2fa1000 0x100>,
+ <0x2fa1400 0x200>,
+ <0x2fa1800 0x200>,
+ <0x2fa1c00 0x200>,
+ <0x2fa2000 0x400>;
+ reg-names = "global", "txchan", "rxchan",
+ "txsched", "rxflow";
+ };
+ };
+
+Navigator DMA client:
+Required properties:
+ - ti,navigator-dmas: List of one or more DMA specifiers, each consisting of
+ - A phandle pointing to DMA instance node
+ - A DMA channel number as a phandle arg.
+ - ti,navigator-dma-names: Contains dma channel name for each DMA specifier in
+ the 'ti,navigator-dmas' property.
+
+Example:
+
+ netcp: netcp@2090000 {
+ ..
+ ti,navigator-dmas = <&dma_gbe 22>,
+ <&dma_gbe 23>,
+ <&dma_gbe 8>;
+ ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+ ..
+ };
diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
new file mode 100644
index 000000000..fcf11e036
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
@@ -0,0 +1,232 @@
+* Texas Instruments Keystone Navigator Queue Management SubSystem driver
+
+The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of
+the main hardware sub system which forms the backbone of the Keystone
+multi-core Navigator. QMSS consist of queue managers, packed-data structure
+processors(PDSP), linking RAM, descriptor pools and infrastructure
+Packet DMA.
+The Queue Manager is a hardware module that is responsible for accelerating
+management of the packet queues. Packets are queued/de-queued by writing or
+reading descriptor address to a particular memory mapped location. The PDSPs
+perform QMSS related functions like accumulation, QoS, or event management.
+Linking RAM registers are used to link the descriptors which are stored in
+descriptor RAM. Descriptor RAM is configurable as internal or external memory.
+The QMSS driver manages the PDSP setups, linking RAM regions,
+queue pool management (allocation, push, pop and notify) and descriptor
+pool management.
+
+
+Required properties:
+- compatible : Must be "ti,keystone-navigator-qmss";
+- clocks : phandle to the reference clock for this device.
+- queue-range : <start number> total range of queue numbers for the device.
+- linkram0 : <address size> for internal link ram, where size is the total
+ link ram entries.
+- linkram1 : <address size> for external link ram, where size is the total
+ external link ram entries. If the address is specified as "0"
+ driver will allocate memory.
+- qmgrs : child node describing the individual queue managers on the
+ SoC. On keystone 1 devices there should be only one node.
+ On keystone 2 devices there can be more than 1 node.
+ -- managed-queues : the actual queues managed by each queue manager
+ instance, specified as <"base queue #" "# of queues">.
+ -- reg : Address and size of the register set for the device.
+ Register regions should be specified in the following
+ order
+ - Queue Peek region.
+ - Queue status RAM.
+ - Queue configuration region.
+ - Descriptor memory setup region.
+ - Queue Management/Queue Proxy region for queue Push.
+ - Queue Management/Queue Proxy region for queue Pop.
+- queue-pools : child node classifying the queue ranges into pools.
+ Queue ranges are grouped into 3 type of pools:
+ - qpend : pool of qpend(interruptible) queues
+ - general-purpose : pool of general queues, primarly used
+ as free descriptor queues or the
+ transmit DMA queues.
+ - accumulator : pool of queues on PDSP accumulator channel
+ Each range can have the following properties:
+ -- qrange : number of queues to use per queue range, specified as
+ <"base queue #" "# of queues">.
+ -- interrupts : Optional property to specify the interrupt mapping
+ for interruptible queues. The driver additionaly sets
+ the interrupt affinity hint based on the cpu mask.
+ -- qalloc-by-id : Optional property to specify that the queues in this
+ range can only be allocated by queue id.
+ -- accumulator : Accumulator channel specification. Any of the PDSPs in
+ QMSS can be loaded with the accumulator firmware. The
+ accumulator firmware’s job is to poll a select number of
+ queues looking for descriptors that have been pushed
+ into them. Descriptors are popped from the queue and
+ placed in a buffer provided by the host. When the list
+ becomes full or a programmed time period expires, the
+ accumulator triggers an interrupt to the host to read
+ the buffer for descriptor information. This firmware
+ comes in 16, 32, and 48 channel builds. Each of these
+ channels can be configured to monitor 32 contiguous
+ queues. Accumulator channel property is specified as:
+ <pdsp-id, channel, entries, pacing mode, latency>
+ pdsp-id : QMSS PDSP running accumulator firmware
+ on which the channel has to be
+ configured
+ channel : Accumulator channel number
+ entries : Size of the accumulator descriptor list
+ pacing mode : Interrupt pacing mode
+ 0 : None, i.e interrupt on list full only
+ 1 : Time delay since last interrupt
+ 2 : Time delay since first new packet
+ 3 : Time delay since last new packet
+ latency : time to delay the interrupt, specified
+ in microseconds.
+ -- multi-queue : Optional property to specify that the channel has to
+ monitor upto 32 queues starting at the base queue #.
+- descriptor-regions : child node describing the memory regions for keystone
+ navigator packet DMA descriptors. The memory for
+ descriptors will be allocated by the driver.
+ -- id : region number in QMSS.
+ -- region-spec : specifies the number of descriptors in the
+ region, specified as
+ <"# of descriptors" "descriptor size">.
+ -- link-index : start index, i.e. index of the first
+ descriptor in the region.
+
+Optional properties:
+- dma-coherent : Present if DMA operations are coherent.
+- pdsps : child node describing the PDSP configuration.
+ -- firmware : firmware to be loaded on the PDSP.
+ -- id : the qmss pdsp that will run the firmware.
+ -- reg : Address and size of the register set for the PDSP.
+ Register regions should be specified in the following
+ order
+ - PDSP internal RAM region.
+ - PDSP control/status region registers.
+ - QMSS interrupt distributor registers.
+ - PDSP command interface region.
+
+Example:
+
+qmss: qmss@2a40000 {
+ compatible = "ti,keystone-qmss";
+ dma-coherent;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&chipclk13>;
+ ranges;
+ queue-range = <0 0x4000>;
+ linkram0 = <0x100000 0x8000>;
+ linkram1 = <0x0 0x10000>;
+
+ qmgrs {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ qmgr0 {
+ managed-queues = <0 0x2000>;
+ reg = <0x2a40000 0x20000>,
+ <0x2a06000 0x400>,
+ <0x2a02000 0x1000>,
+ <0x2a03000 0x1000>,
+ <0x23a80000 0x20000>,
+ <0x2a80000 0x20000>;
+ };
+
+ qmgr1 {
+ managed-queues = <0x2000 0x2000>;
+ reg = <0x2a60000 0x20000>,
+ <0x2a06400 0x400>,
+ <0x2a04000 0x1000>,
+ <0x2a05000 0x1000>,
+ <0x23aa0000 0x20000>,
+ <0x2aa0000 0x20000>;
+ };
+ };
+ queue-pools {
+ qpend {
+ qpend-0 {
+ qrange = <658 8>;
+ interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+ 0 43 0xf04 0 44 0xf04 0 45 0xf04
+ 0 46 0xf04 0 47 0xf04>;
+ };
+ qpend-1 {
+ qrange = <8704 16>;
+ interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+ 0 51 0xf04 0 52 0xf04 0 53 0xf04
+ 0 54 0xf04 0 55 0xf04 0 56 0xf04
+ 0 57 0xf04 0 58 0xf04 0 59 0xf04
+ 0 60 0xf04 0 61 0xf04 0 62 0xf04
+ 0 63 0xf04>;
+ qalloc-by-id;
+ };
+ qpend-2 {
+ qrange = <8720 16>;
+ interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+ 0 59 0xf04 0 68 0xf04 0 69 0xf04
+ 0 70 0xf04 0 71 0xf04 0 72 0xf04
+ 0 73 0xf04 0 74 0xf04 0 75 0xf04
+ 0 76 0xf04 0 77 0xf04 0 78 0xf04
+ 0 79 0xf04>;
+ };
+ };
+ general-purpose {
+ gp-0 {
+ qrange = <4000 64>;
+ };
+ netcp-tx {
+ qrange = <640 9>;
+ qalloc-by-id;
+ };
+ };
+ accumulator {
+ acc-0 {
+ qrange = <128 32>;
+ accumulator = <0 36 16 2 50>;
+ interrupts = <0 215 0xf01>;
+ multi-queue;
+ qalloc-by-id;
+ };
+ acc-1 {
+ qrange = <160 32>;
+ accumulator = <0 37 16 2 50>;
+ interrupts = <0 216 0xf01>;
+ multi-queue;
+ };
+ acc-2 {
+ qrange = <192 32>;
+ accumulator = <0 38 16 2 50>;
+ interrupts = <0 217 0xf01>;
+ multi-queue;
+ };
+ acc-3 {
+ qrange = <224 32>;
+ accumulator = <0 39 16 2 50>;
+ interrupts = <0 218 0xf01>;
+ multi-queue;
+ };
+ };
+ };
+ descriptor-regions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ region-12 {
+ id = <12>;
+ region-spec = <8192 128>; /* num_desc desc_size */
+ link-index = <0x4000>;
+ };
+ };
+ pdsps {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ pdsp0@0x2a10000 {
+ firmware = "/*(DEBLOBBED)*/";
+ reg = <0x2a10000 0x1000>,
+ <0x2a0f000 0x100>,
+ <0x2a0c000 0x3c8>,
+ <0x2a20000 0x4000>;
+ id = <0>;
+ };
+ };
+}; /* qmss */