summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
Initial import
Diffstat (limited to 'Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt')
-rw-r--r--Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt57
1 files changed, 57 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
new file mode 100644
index 000000000..53579197e
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
@@ -0,0 +1,57 @@
+* Universal Flash Storage (UFS) Host Controller
+
+UFSHC nodes are defined to describe on-chip UFS host controllers.
+Each UFS controller instance should have its own node.
+
+Required properties:
+- compatible : compatible list, contains "jedec,ufs-1.1"
+- interrupts : <interrupt mapping for UFS host controller IRQ>
+- reg : <registers mapping>
+
+Optional properties:
+- vdd-hba-supply : phandle to UFS host controller supply regulator node
+- vcc-supply : phandle to VCC supply regulator node
+- vccq-supply : phandle to VCCQ supply regulator node
+- vccq2-supply : phandle to VCCQ2 supply regulator node
+- vcc-supply-1p8 : For embedded UFS devices, valid VCC range is 1.7-1.95V
+ or 2.7-3.6V. This boolean property when set, specifies
+ to use low voltage range of 1.7-1.95V. Note for external
+ UFS cards this property is invalid and valid VCC range is
+ always 2.7-3.6V.
+- vcc-max-microamp : specifies max. load that can be drawn from vcc supply
+- vccq-max-microamp : specifies max. load that can be drawn from vccq supply
+- vccq2-max-microamp : specifies max. load that can be drawn from vccq2 supply
+- <name>-fixed-regulator : boolean property specifying that <name>-supply is a fixed regulator
+
+- clocks : List of phandle and clock specifier pairs
+- clock-names : List of clock input name strings sorted in the same
+ order as the clocks property.
+- freq-table-hz : Array of <min max> operating frequencies stored in the same
+ order as the clocks property. If this property is not
+ defined or a value in the array is "0" then it is assumed
+ that the frequency is set by the parent clock or a
+ fixed rate clock source.
+
+Note: If above properties are not defined it can be assumed that the supply
+regulators or clocks are always on.
+
+Example:
+ ufshc@0xfc598000 {
+ compatible = "jedec,ufs-1.1";
+ reg = <0xfc598000 0x800>;
+ interrupts = <0 28 0>;
+
+ vdd-hba-supply = <&xxx_reg0>;
+ vdd-hba-fixed-regulator;
+ vcc-supply = <&xxx_reg1>;
+ vcc-supply-1p8;
+ vccq-supply = <&xxx_reg2>;
+ vccq2-supply = <&xxx_reg3>;
+ vcc-max-microamp = 500000;
+ vccq-max-microamp = 200000;
+ vccq2-max-microamp = 200000;
+
+ clocks = <&core 0>, <&ref 0>, <&iface 0>;
+ clock-names = "core_clk", "ref_clk", "iface_clk";
+ freq-table-hz = <100000000 200000000>, <0 0>, <0 0>;
+ };