diff options
author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2016-01-20 14:01:31 -0300 |
---|---|---|
committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2016-01-20 14:01:31 -0300 |
commit | b4b7ff4b08e691656c9d77c758fc355833128ac0 (patch) | |
tree | 82fcb00e6b918026dc9f2d1f05ed8eee83874cc0 /Documentation/devicetree/bindings/video/adi,adv7511.txt | |
parent | 35acfa0fc609f2a2cd95cef4a6a9c3a5c38f1778 (diff) |
Linux-libre 4.4-gnupck-4.4-gnu
Diffstat (limited to 'Documentation/devicetree/bindings/video/adi,adv7511.txt')
-rw-r--r-- | Documentation/devicetree/bindings/video/adi,adv7511.txt | 88 |
1 files changed, 0 insertions, 88 deletions
diff --git a/Documentation/devicetree/bindings/video/adi,adv7511.txt b/Documentation/devicetree/bindings/video/adi,adv7511.txt deleted file mode 100644 index 96c25ee01..000000000 --- a/Documentation/devicetree/bindings/video/adi,adv7511.txt +++ /dev/null @@ -1,88 +0,0 @@ -Analog Device ADV7511(W)/13 HDMI Encoders ------------------------------------------ - -The ADV7511, ADV7511W and ADV7513 are HDMI audio and video transmitters -compatible with HDMI 1.4 and DVI 1.0. They support color space conversion, -S/PDIF, CEC and HDCP. - -Required properties: - -- compatible: Should be one of "adi,adv7511", "adi,adv7511w" or "adi,adv7513" -- reg: I2C slave address - -The ADV7511 supports a large number of input data formats that differ by their -color depth, color format, clock mode, bit justification and random -arrangement of components on the data bus. The combination of the following -properties describe the input and map directly to the video input tables of the -ADV7511 datasheet that document all the supported combinations. - -- adi,input-depth: Number of bits per color component at the input (8, 10 or - 12). -- adi,input-colorspace: The input color space, one of "rgb", "yuv422" or - "yuv444". -- adi,input-clock: The input clock type, one of "1x" (one clock cycle per - pixel), "2x" (two clock cycles per pixel), "ddr" (one clock cycle per pixel, - data driven on both edges). - -The following input format properties are required except in "rgb 1x" and -"yuv444 1x" modes, in which case they must not be specified. - -- adi,input-style: The input components arrangement variant (1, 2 or 3), as - listed in the input format tables in the datasheet. -- adi,input-justification: The input bit justification ("left", "evenly", - "right"). - -Optional properties: - -- interrupts: Specifier for the ADV7511 interrupt -- pd-gpios: Specifier for the GPIO connected to the power down signal - -- adi,clock-delay: Video data clock delay relative to the pixel clock, in ps - (-1200 ps .. 1600 ps). Defaults to no delay. -- adi,embedded-sync: The input uses synchronization signals embedded in the - data stream (similar to BT.656). Defaults to separate H/V synchronization - signals. - -Required nodes: - -The ADV7511 has two video ports. Their connections are modelled using the OF -graph bindings specified in Documentation/devicetree/bindings/graph.txt. - -- Video port 0 for the RGB or YUV input -- Video port 1 for the HDMI output - - -Example -------- - - adv7511w: hdmi@39 { - compatible = "adi,adv7511w"; - reg = <39>; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_EDGE_FALLING>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - adi,input-style = <1>; - adi,input-justification = "evenly"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511w_in: endpoint { - remote-endpoint = <&dpi_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; |