Linux-libre 4.4-gnupck-4.4-gnu

1 files changed, 0 insertions, 65 deletions

diff --git a/Documentation/devicetree/bindings/video/exynos5433-decon.txt b/Documentation/devicetree/bindings/video/exynos5433-decon.txt
deleted file mode 100644
index 377afbf51..000000000
--- a/Documentation/devicetree/bindings/video/exynos5433-decon.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Device-Tree bindings for Samsung Exynos SoC display controller (DECON)
-
-DECON (Display and Enhancement Controller) is the Display Controller for the
-Exynos series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be "samsung,exynos5433-decon";
-- reg: physical base address and length of the DECON registers set.
-- interrupts: should contain a list of all DECON IP block interrupts in the
-	      order: VSYNC, LCD_SYSTEM. The interrupt specifier format
-	      depends on the interrupt controller used.
-- interrupt-names: should contain the interrupt names: "vsync", "lcd_sys"
-		   in the same order as they were listed in the interrupts
-		   property.
-- clocks: must include clock specifiers corresponding to entries in the
-	  clock-names property.
-- clock-names: list of clock names sorted in the same order as the clocks
-	       property. Must contain "aclk_decon", "aclk_smmu_decon0x",
-	       "aclk_xiu_decon0x", "pclk_smmu_decon0x", clk_decon_vclk",
-	       "sclk_decon_eclk"
-- ports: contains a port which is connected to mic node. address-cells and
-	 size-cells must 1 and 0, respectively.
-- port: contains an endpoint node which is connected to the endpoint in the mic
-	node. The reg value muset be 0.
-- i80-if-timings: specify whether the panel which is connected to decon uses
-		  i80 lcd interface or mipi video interface. This node contains
-		  no timing information as that of fimd does. Because there is
-		  no register in decon to specify i80 interface timing value,
-		  it is not needed, but make it remain to use same kind of node
-		  in fimd and exynos7 decon.
-
-Example:
-SoC specific DT entry:
-decon: decon@13800000 {
-	compatible = "samsung,exynos5433-decon";
-	reg = <0x13800000 0x2104>;
-	clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
-		<&cmu_disp CLK_ACLK_XIU_DECON0X>,
-		<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
-		<&cmu_disp CLK_SCLK_DECON_VCLK>,
-		<&cmu_disp CLK_SCLK_DECON_ECLK>;
-	clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x",
-		"pclk_smmu_decon0x", "sclk_decon_vclk", "sclk_decon_eclk";
-	interrupt-names = "vsync", "lcd_sys";
-	interrupts = <0 202 0>, <0 203 0>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			decon_to_mic: endpoint {
-				remote-endpoint = <&mic_to_decon>;
-			};
-		};
-	};
-};
-
-Board specific DT entry:
-&decon {
-	i80-if-timings {
-	};
-};