summaryrefslogtreecommitdiff
path: root/Documentation/fmc/API.txt
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /Documentation/fmc/API.txt
Initial import
Diffstat (limited to 'Documentation/fmc/API.txt')
-rw-r--r--Documentation/fmc/API.txt47
1 files changed, 47 insertions, 0 deletions
diff --git a/Documentation/fmc/API.txt b/Documentation/fmc/API.txt
new file mode 100644
index 000000000..06b06b92c
--- /dev/null
+++ b/Documentation/fmc/API.txt
@@ -0,0 +1,47 @@
+Functions Exported by fmc.ko
+****************************
+
+The FMC core exports the usual 4 functions that are needed for a bus to
+work, and a few more:
+
+ int fmc_driver_register(struct fmc_driver *drv);
+ void fmc_driver_unregister(struct fmc_driver *drv);
+ int fmc_device_register(struct fmc_device *fmc);
+ void fmc_device_unregister(struct fmc_device *fmc);
+
+ int fmc_device_register_n(struct fmc_device **fmc, int n);
+ void fmc_device_unregister_n(struct fmc_device **fmc, int n);
+
+ uint32_t fmc_readl(struct fmc_device *fmc, int offset);
+ void fmc_writel(struct fmc_device *fmc, uint32_t val, int off);
+ void *fmc_get_drvdata(struct fmc_device *fmc);
+ void fmc_set_drvdata(struct fmc_device *fmc, void *data);
+
+ int fmc_reprogram(struct fmc_device *f, struct fmc_driver *d, char *gw,
+ int sdb_entry);
+
+The data structure that describe a device is detailed in *note FMC
+Device::, the one that describes a driver is detailed in *note FMC
+Driver::. Please note that structures of type fmc_device must be
+allocated by the caller, but must not be released after unregistering.
+The fmc-bus itself takes care of releasing the structure when their use
+count reaches zero - actually, the device model does that in lieu of us.
+
+The functions to register and unregister n devices are meant to be used
+by carriers that host more than one mezzanine. The devices must all be
+registered at the same time because if the FPGA is reprogrammed, all
+devices in the array are affected. Usually, the driver matching the
+first device will reprogram the FPGA, so other devices must know they
+are already driven by a reprogrammed FPGA.
+
+If a carrier hosts slots that are driven by different FPGA devices, it
+should register as a group only mezzanines that are driven by the same
+FPGA, for the reason outlined above.
+
+Finally, the fmc_reprogram function calls the reprogram method (see
+*note The API Offered by Carriers:: and also scans the memory area for
+an SDB tree. You can pass -1 as sdb_entry to disable such scan.
+Otherwise, the function fails if no tree is found at the specified
+entry point. The function is meant to factorize common code, and by
+the time you read this it is already used by the spec-sw and fine-delay
+modules.