diff options
| author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-09-08 01:01:14 -0300 |
|---|---|---|
| committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-09-08 01:01:14 -0300 |
| commit | e5fd91f1ef340da553f7a79da9540c3db711c937 (patch) | |
| tree | b11842027dc6641da63f4bcc524f8678263304a3 /Documentation/hwmon/w83792d | |
| parent | 2a9b0348e685a63d97486f6749622b61e9e3292f (diff) | |
Linux-libre 4.2-gnu
Diffstat (limited to 'Documentation/hwmon/w83792d')
| -rw-r--r-- | Documentation/hwmon/w83792d | 18 |
1 files changed, 13 insertions, 5 deletions
diff --git a/Documentation/hwmon/w83792d b/Documentation/hwmon/w83792d index 53f7b6866..f2ffc402e 100644 --- a/Documentation/hwmon/w83792d +++ b/Documentation/hwmon/w83792d @@ -8,6 +8,7 @@ Supported chips: Datasheet: http://www.winbond.com.tw Author: Shane Huang (Winbond) +Updated: Roger Lucas Module Parameters @@ -38,9 +39,16 @@ parameter; this will put it into a more well-behaved state first. The driver implements three temperature sensors, seven fan rotation speed sensors, nine voltage sensors, and two automatic fan regulation strategies called: Smart Fan I (Thermal Cruise mode) and Smart Fan II. -Automatic fan control mode is possible only for fan1-fan3. Fan4-fan7 can run -synchronized with selected fan (fan1-fan3). This functionality and manual PWM -control for fan4-fan7 is not yet implemented. + +The driver also implements up to seven fan control outputs: pwm1-7. Pwm1-7 +can be configured to PWM output or Analogue DC output via their associated +pwmX_mode. Outputs pwm4 through pwm7 may or may not be present depending on +how the W83792AD/D was configured by the BIOS. + +Automatic fan control mode is possible only for fan1-fan3. + +For all pwmX outputs, a value of 0 means minimum fan speed and a value of +255 means maximum fan speed. Temperatures are measured in degrees Celsius and measurement resolution is 1 degC for temp1 and 0.5 degC for temp2 and temp3. An alarm is triggered when @@ -157,14 +165,14 @@ for each fan. /sys files ---------- -pwm[1-3] - this file stores PWM duty cycle or DC value (fan speed) in range: +pwm[1-7] - this file stores PWM duty cycle or DC value (fan speed) in range: 0 (stop) to 255 (full) pwm[1-3]_enable - this file controls mode of fan/temperature control: * 0 Disabled * 1 Manual mode * 2 Smart Fan II * 3 Thermal Cruise -pwm[1-3]_mode - Select PWM of DC mode +pwm[1-7]_mode - Select PWM or DC mode * 0 DC * 1 PWM thermal_cruise[1-3] - Selects the desired temperature for cruise (degC) |