diff options
| author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-12-15 14:52:16 -0300 |
|---|---|---|
| committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-12-15 14:52:16 -0300 |
| commit | 8d91c1e411f55d7ea91b1183a2e9f8088fb4d5be (patch) | |
| tree | e9891aa6c295060d065adffd610c4f49ecf884f3 /Documentation/i2c | |
| parent | a71852147516bc1cb5b0b3cbd13639bfd4022dc8 (diff) | |
Linux-libre 4.3.2-gnu
Diffstat (limited to 'Documentation/i2c')
| -rw-r--r-- | Documentation/i2c/busses/i2c-parport | 1 | ||||
| -rw-r--r-- | Documentation/i2c/slave-interface | 9 | ||||
| -rw-r--r-- | Documentation/i2c/ten-bit-addresses | 4 |
3 files changed, 11 insertions, 3 deletions
diff --git a/Documentation/i2c/busses/i2c-parport b/Documentation/i2c/busses/i2c-parport index 0e2d17b46..c3dbb3bfd 100644 --- a/Documentation/i2c/busses/i2c-parport +++ b/Documentation/i2c/busses/i2c-parport @@ -20,6 +20,7 @@ It currently supports the following devices: * (type=5) Analog Devices evaluation boards: ADM1025, ADM1030, ADM1031 * (type=6) Barco LPT->DVI (K5800236) adapter * (type=7) One For All JP1 parallel port adapter + * (type=8) VCT-jig These devices use different pinout configurations, so you have to tell the driver what you have, using the type module parameter. There is no diff --git a/Documentation/i2c/slave-interface b/Documentation/i2c/slave-interface index 2dee4e2d6..61ed05cd9 100644 --- a/Documentation/i2c/slave-interface +++ b/Documentation/i2c/slave-interface @@ -31,10 +31,13 @@ User manual =========== I2C slave backends behave like standard I2C clients. So, you can instantiate -them as described in the document 'instantiating-devices'. A quick example for -instantiating the slave-eeprom driver from userspace at address 0x64 on bus 1: +them as described in the document 'instantiating-devices'. The only difference +is that i2c slave backends have their own address space. So, you have to add +0x1000 to the address you would originally request. An example for +instantiating the slave-eeprom driver from userspace at the 7 bit address 0x64 +on bus 1: - # echo slave-24c02 0x64 > /sys/bus/i2c/devices/i2c-1/new_device + # echo slave-24c02 0x1064 > /sys/bus/i2c/devices/i2c-1/new_device Each backend should come with separate documentation to describe its specific behaviour and setup. diff --git a/Documentation/i2c/ten-bit-addresses b/Documentation/i2c/ten-bit-addresses index cdfe13901..7b2d11e53 100644 --- a/Documentation/i2c/ten-bit-addresses +++ b/Documentation/i2c/ten-bit-addresses @@ -2,6 +2,10 @@ The I2C protocol knows about two kinds of device addresses: normal 7 bit addresses, and an extended set of 10 bit addresses. The sets of addresses do not intersect: the 7 bit address 0x10 is not the same as the 10 bit address 0x10 (though a single device could respond to both of them). +To avoid ambiguity, the user sees 10 bit addresses mapped to a different +address space, namely 0xa000-0xa3ff. The leading 0xa (= 10) represents the +10 bit mode. This is used for creating device names in sysfs. It is also +needed when instantiating 10 bit devices via the new_device file in sysfs. I2C messages to and from 10-bit address devices have a different format. See the I2C specification for the details. |