Initial import

2 files changed, 688 insertions, 0 deletions

diff --git a/Documentation/kdump/gdbmacros.txt b/Documentation/kdump/gdbmacros.txt
new file mode 100644
index 000000000..9b9b454b0
--- /dev/null
+++ b/Documentation/kdump/gdbmacros.txt
@@ -0,0 +1,201 @@
+#
+# This file contains a few gdb macros (user defined commands) to extract
+# useful information from kernel crashdump (kdump) like stack traces of
+# all the processes or a particular process and trapinfo.
+#
+# These macros can be used by copying this file in .gdbinit (put in home
+# directory or current directory) or by invoking gdb command with
+# --command=<command-file-name> option
+#
+# Credits:
+# Alexander Nyberg <alexn@telia.com>
+# V Srivatsa <vatsa@in.ibm.com>
+# Maneesh Soni <maneesh@in.ibm.com>
+#
+
+define bttnobp
+	set $tasks_off=((size_t)&((struct task_struct *)0)->tasks)
+	set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next)
+	set $init_t=&init_task
+	set $next_t=(((char *)($init_t->tasks).next) - $tasks_off)
+	while ($next_t != $init_t)
+		set $next_t=(struct task_struct *)$next_t
+		printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm
+		printf "===================\n"
+		set var $stackp = $next_t.thread.esp
+		set var $stack_top = ($stackp & ~4095) + 4096
+
+		while ($stackp < $stack_top)
+			if (*($stackp) > _stext && *($stackp) < _sinittext)
+				info symbol *($stackp)
+			end
+			set $stackp += 4
+		end
+		set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off)
+		while ($next_th != $next_t)
+			set $next_th=(struct task_struct *)$next_th
+			printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm
+			printf "===================\n"
+			set var $stackp = $next_t.thread.esp
+			set var $stack_top = ($stackp & ~4095) + 4096
+
+			while ($stackp < $stack_top)
+				if (*($stackp) > _stext && *($stackp) < _sinittext)
+					info symbol *($stackp)
+				end
+				set $stackp += 4
+			end
+			set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off)
+		end
+		set $next_t=(char *)($next_t->tasks.next) - $tasks_off
+	end
+end
+document bttnobp
+	dump all thread stack traces on a kernel compiled with !CONFIG_FRAME_POINTER
+end
+
+define btt
+	set $tasks_off=((size_t)&((struct task_struct *)0)->tasks)
+	set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next)
+	set $init_t=&init_task
+	set $next_t=(((char *)($init_t->tasks).next) - $tasks_off)
+	while ($next_t != $init_t)
+		set $next_t=(struct task_struct *)$next_t
+		printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm
+		printf "===================\n"
+		set var $stackp = $next_t.thread.esp
+		set var $stack_top = ($stackp & ~4095) + 4096
+		set var $stack_bot = ($stackp & ~4095)
+
+		set $stackp = *($stackp)
+		while (($stackp < $stack_top) && ($stackp > $stack_bot))
+			set var $addr = *($stackp + 4)
+			info symbol $addr
+			set $stackp = *($stackp)
+		end
+
+		set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off)
+		while ($next_th != $next_t)
+			set $next_th=(struct task_struct *)$next_th
+			printf "\npid %d; comm %s:\n", $next_t.pid, $next_t.comm
+			printf "===================\n"
+			set var $stackp = $next_t.thread.esp
+			set var $stack_top = ($stackp & ~4095) + 4096
+			set var $stack_bot = ($stackp & ~4095)
+
+			set $stackp = *($stackp)
+			while (($stackp < $stack_top) && ($stackp > $stack_bot))
+				set var $addr = *($stackp + 4)
+				info symbol $addr
+				set $stackp = *($stackp)
+			end
+			set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off)
+		end
+		set $next_t=(char *)($next_t->tasks.next) - $tasks_off
+	end
+end
+document btt
+	dump all thread stack traces on a kernel compiled with CONFIG_FRAME_POINTER
+end
+
+define btpid
+	set var $pid = $arg0
+	set $tasks_off=((size_t)&((struct task_struct *)0)->tasks)
+	set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next)
+	set $init_t=&init_task
+	set $next_t=(((char *)($init_t->tasks).next) - $tasks_off)
+	set var $pid_task = 0
+
+	while ($next_t != $init_t)
+		set $next_t=(struct task_struct *)$next_t
+
+		if ($next_t.pid == $pid)
+			set $pid_task = $next_t
+		end
+
+		set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off)
+		while ($next_th != $next_t)
+			set $next_th=(struct task_struct *)$next_th
+			if ($next_th.pid == $pid)
+				set $pid_task = $next_th
+			end
+			set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off)
+		end
+		set $next_t=(char *)($next_t->tasks.next) - $tasks_off
+	end
+
+	printf "\npid %d; comm %s:\n", $pid_task.pid, $pid_task.comm
+	printf "===================\n"
+	set var $stackp = $pid_task.thread.esp
+	set var $stack_top = ($stackp & ~4095) + 4096
+	set var $stack_bot = ($stackp & ~4095)
+
+	set $stackp = *($stackp)
+	while (($stackp < $stack_top) && ($stackp > $stack_bot))
+		set var $addr = *($stackp + 4)
+		info symbol $addr
+		set $stackp = *($stackp)
+	end
+end
+document btpid
+	backtrace of pid
+end
+
+
+define trapinfo
+	set var $pid = $arg0
+	set $tasks_off=((size_t)&((struct task_struct *)0)->tasks)
+	set $pid_off=((size_t)&((struct task_struct *)0)->pids[1].pid_list.next)
+	set $init_t=&init_task
+	set $next_t=(((char *)($init_t->tasks).next) - $tasks_off)
+	set var $pid_task = 0
+
+	while ($next_t != $init_t)
+		set $next_t=(struct task_struct *)$next_t
+
+		if ($next_t.pid == $pid)
+			set $pid_task = $next_t
+		end
+
+		set $next_th=(((char *)$next_t->pids[1].pid_list.next) - $pid_off)
+		while ($next_th != $next_t)
+			set $next_th=(struct task_struct *)$next_th
+			if ($next_th.pid == $pid)
+				set $pid_task = $next_th
+			end
+			set $next_th=(((char *)$next_th->pids[1].pid_list.next) - $pid_off)
+		end
+		set $next_t=(char *)($next_t->tasks.next) - $tasks_off
+	end
+
+	printf "Trapno %ld, cr2 0x%lx, error_code %ld\n", $pid_task.thread.trap_no, \
+				$pid_task.thread.cr2, $pid_task.thread.error_code
+
+end
+document trapinfo
+	Run info threads and lookup pid of thread #1
+	'trapinfo <pid>' will tell you by which trap & possibly
+	address the kernel panicked.
+end
+
+
+define dmesg
+	set $i = 0
+	set $end_idx = (log_end - 1) & (log_buf_len - 1)
+
+	while ($i < logged_chars)
+		set $idx = (log_end - 1 - logged_chars + $i) & (log_buf_len - 1)
+
+		if ($idx + 100 <= $end_idx) || \
+		   ($end_idx <= $idx && $idx + 100 < log_buf_len)
+			printf "%.100s", &log_buf[$idx]
+			set $i = $i + 100
+		else
+			printf "%c", log_buf[$idx]
+			set $i = $i + 1
+		end
+	end
+end
+document dmesg
+	print the kernel ring buffer
+end
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
new file mode 100644
index 000000000..bc4bd5a44
--- /dev/null
+++ b/Documentation/kdump/kdump.txt
@@ -0,0 +1,487 @@
+================================================================
+Documentation for Kdump - The kexec-based Crash Dumping Solution
+================================================================
+
+This document includes overview, setup and installation, and analysis
+information.
+
+Overview
+========
+
+Kdump uses kexec to quickly boot to a dump-capture kernel whenever a
+dump of the system kernel's memory needs to be taken (for example, when
+the system panics). The system kernel's memory image is preserved across
+the reboot and is accessible to the dump-capture kernel.
+
+You can use common commands, such as cp and scp, to copy the
+memory image to a dump file on the local disk, or across the network to
+a remote system.
+
+Kdump and kexec are currently supported on the x86, x86_64, ppc64, ia64,
+s390x and arm architectures.
+
+When the system kernel boots, it reserves a small section of memory for
+the dump-capture kernel. This ensures that ongoing Direct Memory Access
+(DMA) from the system kernel does not corrupt the dump-capture kernel.
+The kexec -p command loads the dump-capture kernel into this reserved
+memory.
+
+On x86 machines, the first 640 KB of physical memory is needed to boot,
+regardless of where the kernel loads. Therefore, kexec backs up this
+region just before rebooting into the dump-capture kernel.
+
+Similarly on PPC64 machines first 32KB of physical memory is needed for
+booting regardless of where the kernel is loaded and to support 64K page
+size kexec backs up the first 64KB memory.
+
+For s390x, when kdump is triggered, the crashkernel region is exchanged
+with the region [0, crashkernel region size] and then the kdump kernel
+runs in [0, crashkernel region size]. Therefore no relocatable kernel is
+needed for s390x.
+
+All of the necessary information about the system kernel's core image is
+encoded in the ELF format, and stored in a reserved area of memory
+before a crash. The physical address of the start of the ELF header is
+passed to the dump-capture kernel through the elfcorehdr= boot
+parameter. Optionally the size of the ELF header can also be passed
+when using the elfcorehdr=[size[KMG]@]offset[KMG] syntax.
+
+
+With the dump-capture kernel, you can access the memory image through
+/proc/vmcore. This exports the dump as an ELF-format file that you can
+write out using file copy commands such as cp or scp. Further, you can
+use analysis tools such as the GNU Debugger (GDB) and the Crash tool to
+debug the dump file. This method ensures that the dump pages are correctly
+ordered.
+
+
+Setup and Installation
+======================
+
+Install kexec-tools
+-------------------
+
+1) Login as the root user.
+
+2) Download the kexec-tools user-space package from the following URL:
+
+http://kernel.org/pub/linux/utils/kernel/kexec/kexec-tools.tar.gz
+
+This is a symlink to the latest version.
+
+The latest kexec-tools git tree is available at:
+
+git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
+and
+http://www.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
+
+There is also a gitweb interface available at
+http://www.kernel.org/git/?p=utils/kernel/kexec/kexec-tools.git
+
+More information about kexec-tools can be found at
+http://horms.net/projects/kexec/
+
+3) Unpack the tarball with the tar command, as follows:
+
+   tar xvpzf kexec-tools.tar.gz
+
+4) Change to the kexec-tools directory, as follows:
+
+   cd kexec-tools-VERSION
+
+5) Configure the package, as follows:
+
+   ./configure
+
+6) Compile the package, as follows:
+
+   make
+
+7) Install the package, as follows:
+
+   make install
+
+
+Build the system and dump-capture kernels
+-----------------------------------------
+There are two possible methods of using Kdump.
+
+1) Build a separate custom dump-capture kernel for capturing the
+   kernel core dump.
+
+2) Or use the system kernel binary itself as dump-capture kernel and there is
+   no need to build a separate dump-capture kernel. This is possible
+   only with the architectures which support a relocatable kernel. As
+   of today, i386, x86_64, ppc64, ia64 and arm architectures support relocatable
+   kernel.
+
+Building a relocatable kernel is advantageous from the point of view that
+one does not have to build a second kernel for capturing the dump. But
+at the same time one might want to build a custom dump capture kernel
+suitable to his needs.
+
+Following are the configuration setting required for system and
+dump-capture kernels for enabling kdump support.
+
+System kernel config options
+----------------------------
+
+1) Enable "kexec system call" in "Processor type and features."
+
+   CONFIG_KEXEC=y
+
+2) Enable "sysfs file system support" in "Filesystem" -> "Pseudo
+   filesystems." This is usually enabled by default.
+
+   CONFIG_SYSFS=y
+
+   Note that "sysfs file system support" might not appear in the "Pseudo
+   filesystems" menu if "Configure standard kernel features (for small
+   systems)" is not enabled in "General Setup." In this case, check the
+   .config file itself to ensure that sysfs is turned on, as follows:
+
+   grep 'CONFIG_SYSFS' .config
+
+3) Enable "Compile the kernel with debug info" in "Kernel hacking."
+
+   CONFIG_DEBUG_INFO=Y
+
+   This causes the kernel to be built with debug symbols. The dump
+   analysis tools require a vmlinux with debug symbols in order to read
+   and analyze a dump file.
+
+Dump-capture kernel config options (Arch Independent)
+-----------------------------------------------------
+
+1) Enable "kernel crash dumps" support under "Processor type and
+   features":
+
+   CONFIG_CRASH_DUMP=y
+
+2) Enable "/proc/vmcore support" under "Filesystems" -> "Pseudo filesystems".
+
+   CONFIG_PROC_VMCORE=y
+   (CONFIG_PROC_VMCORE is set by default when CONFIG_CRASH_DUMP is selected.)
+
+Dump-capture kernel config options (Arch Dependent, i386 and x86_64)
+--------------------------------------------------------------------
+
+1) On i386, enable high memory support under "Processor type and
+   features":
+
+   CONFIG_HIGHMEM64G=y
+   or
+   CONFIG_HIGHMEM4G
+
+2) On i386 and x86_64, disable symmetric multi-processing support
+   under "Processor type and features":
+
+   CONFIG_SMP=n
+
+   (If CONFIG_SMP=y, then specify maxcpus=1 on the kernel command line
+   when loading the dump-capture kernel, see section "Load the Dump-capture
+   Kernel".)
+
+3) If one wants to build and use a relocatable kernel,
+   Enable "Build a relocatable kernel" support under "Processor type and
+   features"
+
+   CONFIG_RELOCATABLE=y
+
+4) Use a suitable value for "Physical address where the kernel is
+   loaded" (under "Processor type and features"). This only appears when
+   "kernel crash dumps" is enabled. A suitable value depends upon
+   whether kernel is relocatable or not.
+
+   If you are using a relocatable kernel use CONFIG_PHYSICAL_START=0x100000
+   This will compile the kernel for physical address 1MB, but given the fact
+   kernel is relocatable, it can be run from any physical address hence
+   kexec boot loader will load it in memory region reserved for dump-capture
+   kernel.
+
+   Otherwise it should be the start of memory region reserved for
+   second kernel using boot parameter "crashkernel=Y@X". Here X is
+   start of memory region reserved for dump-capture kernel.
+   Generally X is 16MB (0x1000000). So you can set
+   CONFIG_PHYSICAL_START=0x1000000
+
+5) Make and install the kernel and its modules. DO NOT add this kernel
+   to the boot loader configuration files.
+
+Dump-capture kernel config options (Arch Dependent, ppc64)
+----------------------------------------------------------
+
+1) Enable "Build a kdump crash kernel" support under "Kernel" options:
+
+   CONFIG_CRASH_DUMP=y
+
+2)   Enable "Build a relocatable kernel" support
+
+   CONFIG_RELOCATABLE=y
+
+   Make and install the kernel and its modules.
+
+Dump-capture kernel config options (Arch Dependent, ia64)
+----------------------------------------------------------
+
+- No specific options are required to create a dump-capture kernel
+  for ia64, other than those specified in the arch independent section
+  above. This means that it is possible to use the system kernel
+  as a dump-capture kernel if desired.
+
+  The crashkernel region can be automatically placed by the system
+  kernel at run time. This is done by specifying the base address as 0,
+  or omitting it all together.
+
+  crashkernel=256M@0
+  or
+  crashkernel=256M
+
+  If the start address is specified, note that the start address of the
+  kernel will be aligned to 64Mb, so if the start address is not then
+  any space below the alignment point will be wasted.
+
+Dump-capture kernel config options (Arch Dependent, arm)
+----------------------------------------------------------
+
+-   To use a relocatable kernel,
+    Enable "AUTO_ZRELADDR" support under "Boot" options:
+
+    AUTO_ZRELADDR=y
+
+Extended crashkernel syntax
+===========================
+
+While the "crashkernel=size[@offset]" syntax is sufficient for most
+configurations, sometimes it's handy to have the reserved memory dependent
+on the value of System RAM -- that's mostly for distributors that pre-setup
+the kernel command line to avoid a unbootable system after some memory has
+been removed from the machine.
+
+The syntax is:
+
+    crashkernel=<range1>:<size1>[,<range2>:<size2>,...][@offset]
+    range=start-[end]
+
+Please note, on arm, the offset is required.
+    crashkernel=<range1>:<size1>[,<range2>:<size2>,...]@offset
+    range=start-[end]
+
+    'start' is inclusive and 'end' is exclusive.
+
+For example:
+
+    crashkernel=512M-2G:64M,2G-:128M
+
+This would mean:
+
+    1) if the RAM is smaller than 512M, then don't reserve anything
+       (this is the "rescue" case)
+    2) if the RAM size is between 512M and 2G (exclusive), then reserve 64M
+    3) if the RAM size is larger than 2G, then reserve 128M
+
+
+
+Boot into System Kernel
+=======================
+
+1) Update the boot loader (such as grub, yaboot, or lilo) configuration
+   files as necessary.
+
+2) Boot the system kernel with the boot parameter "crashkernel=Y@X",
+   where Y specifies how much memory to reserve for the dump-capture kernel
+   and X specifies the beginning of this reserved memory. For example,
+   "crashkernel=64M@16M" tells the system kernel to reserve 64 MB of memory
+   starting at physical address 0x01000000 (16MB) for the dump-capture kernel.
+
+   On x86 and x86_64, use "crashkernel=64M@16M".
+
+   On ppc64, use "crashkernel=128M@32M".
+
+   On ia64, 256M@256M is a generous value that typically works.
+   The region may be automatically placed on ia64, see the
+   dump-capture kernel config option notes above.
+   If use sparse memory, the size should be rounded to GRANULE boundaries.
+
+   On s390x, typically use "crashkernel=xxM". The value of xx is dependent
+   on the memory consumption of the kdump system. In general this is not
+   dependent on the memory size of the production system.
+
+   On arm, use "crashkernel=Y@X". Note that the start address of the kernel
+   will be aligned to 128MiB (0x08000000), so if the start address is not then
+   any space below the alignment point may be overwritten by the dump-capture kernel,
+   which means it is possible that the vmcore is not that precise as expected.
+
+
+Load the Dump-capture Kernel
+============================
+
+After booting to the system kernel, dump-capture kernel needs to be
+loaded.
+
+Based on the architecture and type of image (relocatable or not), one
+can choose to load the uncompressed vmlinux or compressed bzImage/vmlinuz
+of dump-capture kernel. Following is the summary.
+
+For i386 and x86_64:
+	- Use vmlinux if kernel is not relocatable.
+	- Use bzImage/vmlinuz if kernel is relocatable.
+For ppc64:
+	- Use vmlinux
+For ia64:
+	- Use vmlinux or vmlinuz.gz
+For s390x:
+	- Use image or bzImage
+For arm:
+	- Use zImage
+
+If you are using a uncompressed vmlinux image then use following command
+to load dump-capture kernel.
+
+   kexec -p <dump-capture-kernel-vmlinux-image> \
+   --initrd=<initrd-for-dump-capture-kernel> --args-linux \
+   --append="root=<root-dev> <arch-specific-options>"
+
+If you are using a compressed bzImage/vmlinuz, then use following command
+to load dump-capture kernel.
+
+   kexec -p <dump-capture-kernel-bzImage> \
+   --initrd=<initrd-for-dump-capture-kernel> \
+   --append="root=<root-dev> <arch-specific-options>"
+
+If you are using a compressed zImage, then use following command
+to load dump-capture kernel.
+
+   kexec --type zImage -p <dump-capture-kernel-bzImage> \
+   --initrd=<initrd-for-dump-capture-kernel> \
+   --dtb=<dtb-for-dump-capture-kernel> \
+   --append="root=<root-dev> <arch-specific-options>"
+
+
+Please note, that --args-linux does not need to be specified for ia64.
+It is planned to make this a no-op on that architecture, but for now
+it should be omitted
+
+Following are the arch specific command line options to be used while
+loading dump-capture kernel.
+
+For i386, x86_64 and ia64:
+	"1 irqpoll maxcpus=1 reset_devices"
+
+For ppc64:
+	"1 maxcpus=1 noirqdistrib reset_devices"
+
+For s390x:
+	"1 maxcpus=1 cgroup_disable=memory"
+
+For arm:
+	"1 maxcpus=1 reset_devices"
+
+Notes on loading the dump-capture kernel:
+
+* By default, the ELF headers are stored in ELF64 format to support
+  systems with more than 4GB memory. On i386, kexec automatically checks if
+  the physical RAM size exceeds the 4 GB limit and if not, uses ELF32.
+  So, on non-PAE systems, ELF32 is always used.
+
+  The --elf32-core-headers option can be used to force the generation of ELF32
+  headers. This is necessary because GDB currently cannot open vmcore files
+  with ELF64 headers on 32-bit systems.
+
+* The "irqpoll" boot parameter reduces driver initialization failures
+  due to shared interrupts in the dump-capture kernel.
+
+* You must specify <root-dev> in the format corresponding to the root
+  device name in the output of mount command.
+
+* Boot parameter "1" boots the dump-capture kernel into single-user
+  mode without networking. If you want networking, use "3".
+
+* We generally don' have to bring up a SMP kernel just to capture the
+  dump. Hence generally it is useful either to build a UP dump-capture
+  kernel or specify maxcpus=1 option while loading dump-capture kernel.
+
+* For s390x there are two kdump modes: If a ELF header is specified with
+  the elfcorehdr= kernel parameter, it is used by the kdump kernel as it
+  is done on all other architectures. If no elfcorehdr= kernel parameter is
+  specified, the s390x kdump kernel dynamically creates the header. The
+  second mode has the advantage that for CPU and memory hotplug, kdump has
+  not to be reloaded with kexec_load().
+
+* For s390x systems with many attached devices the "cio_ignore" kernel
+  parameter should be used for the kdump kernel in order to prevent allocation
+  of kernel memory for devices that are not relevant for kdump. The same
+  applies to systems that use SCSI/FCP devices. In that case the
+  "allow_lun_scan" zfcp module parameter should be set to zero before
+  setting FCP devices online.
+
+Kernel Panic
+============
+
+After successfully loading the dump-capture kernel as previously
+described, the system will reboot into the dump-capture kernel if a
+system crash is triggered.  Trigger points are located in panic(),
+die(), die_nmi() and in the sysrq handler (ALT-SysRq-c).
+
+The following conditions will execute a crash trigger point:
+
+If a hard lockup is detected and "NMI watchdog" is configured, the system
+will boot into the dump-capture kernel ( die_nmi() ).
+
+If die() is called, and it happens to be a thread with pid 0 or 1, or die()
+is called inside interrupt context or die() is called and panic_on_oops is set,
+the system will boot into the dump-capture kernel.
+
+On powerpc systems when a soft-reset is generated, die() is called by all cpus
+and the system will boot into the dump-capture kernel.
+
+For testing purposes, you can trigger a crash by using "ALT-SysRq-c",
+"echo c > /proc/sysrq-trigger" or write a module to force the panic.
+
+Write Out the Dump File
+=======================
+
+After the dump-capture kernel is booted, write out the dump file with
+the following command:
+
+   cp /proc/vmcore <dump-file>
+
+
+Analysis
+========
+
+Before analyzing the dump image, you should reboot into a stable kernel.
+
+You can do limited analysis using GDB on the dump file copied out of
+/proc/vmcore. Use the debug vmlinux built with -g and run the following
+command:
+
+   gdb vmlinux <dump-file>
+
+Stack trace for the task on processor 0, register display, and memory
+display work fine.
+
+Note: GDB cannot analyze core files generated in ELF64 format for x86.
+On systems with a maximum of 4GB of memory, you can generate
+ELF32-format headers using the --elf32-core-headers kernel option on the
+dump kernel.
+
+You can also use the Crash utility to analyze dump files in Kdump
+format. Crash is available on Dave Anderson's site at the following URL:
+
+   http://people.redhat.com/~anderson/
+
+Trigger Kdump on WARN()
+=======================
+
+The kernel parameter, panic_on_warn, calls panic() in all WARN() paths.  This
+will cause a kdump to occur at the panic() call.  In cases where a user wants
+to specify this during runtime, /proc/sys/kernel/panic_on_warn can be set to 1
+to achieve the same behaviour.
+
+Contact
+=======
+
+Vivek Goyal (vgoyal@redhat.com)
+Maneesh Soni (maneesh@in.ibm.com)
+