Linux-libre 4.4.1-gnupck-4.4.1-gnu

4 files changed, 15 insertions, 385 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 3a4abfc44..136ba17d2 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -134,19 +134,21 @@ Description:
 		enabled for the device. Developer can write y/Y/1 or n/N/0 to
 		the file to enable/disable the feature.
 
-What:		/sys/bus/usb/devices/.../power/usb3_hardware_lpm
-Date:		June 2015
+What:		/sys/bus/usb/devices/.../power/usb3_hardware_lpm_u1
+		/sys/bus/usb/devices/.../power/usb3_hardware_lpm_u2
+Date:		November 2015
 Contact:	Kevin Strasser <kevin.strasser@linux.intel.com>
+		Lu Baolu <baolu.lu@linux.intel.com>
 Description:
 		If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged
 		in to a xHCI host which supports link PM, it will check if U1
 		and U2 exit latencies have been set in the BOS descriptor; if
-		the check is is passed and the host supports USB3 hardware LPM,
+		the check is passed and the host supports USB3 hardware LPM,
 		USB3 hardware LPM will be enabled for the device and the USB
-		device directory will contain a file named
-		power/usb3_hardware_lpm. The file holds a string value (enable
-		or disable) indicating whether or not USB3 hardware LPM is
-		enabled for the device.
+		device directory will contain two files named
+		power/usb3_hardware_lpm_u1 and power/usb3_hardware_lpm_u2. These
+		files hold a string value (enable or disable) indicating whether
+		or not USB3 hardware LPM U1 or U2 is enabled for the device.
 
 What:		/sys/bus/usb/devices/.../removable
 Date:		February 2012
diff --git a/Documentation/scheduler/sched-BFS.txt b/Documentation/scheduler/sched-BFS.txt
deleted file mode 100644
index c10d95601..000000000
--- a/Documentation/scheduler/sched-BFS.txt
+++ /dev/null
@@ -1,347 +0,0 @@
-BFS - The Brain Fuck Scheduler by Con Kolivas.
-
-Goals.
-
-The goal of the Brain Fuck Scheduler, referred to as BFS from here on, is to
-completely do away with the complex designs of the past for the cpu process
-scheduler and instead implement one that is very simple in basic design.
-The main focus of BFS is to achieve excellent desktop interactivity and
-responsiveness without heuristics and tuning knobs that are difficult to
-understand, impossible to model and predict the effect of, and when tuned to
-one workload cause massive detriment to another.
-
-
-Design summary.
-
-BFS is best described as a single runqueue, O(n) lookup, earliest effective
-virtual deadline first design, loosely based on EEVDF (earliest eligible virtual
-deadline first) and my previous Staircase Deadline scheduler. Each component
-shall be described in order to understand the significance of, and reasoning for
-it. The codebase when the first stable version was released was approximately
-9000 lines less code than the existing mainline linux kernel scheduler (in
-2.6.31). This does not even take into account the removal of documentation and
-the cgroups code that is not used.
-
-Design reasoning.
-
-The single runqueue refers to the queued but not running processes for the
-entire system, regardless of the number of CPUs. The reason for going back to
-a single runqueue design is that once multiple runqueues are introduced,
-per-CPU or otherwise, there will be complex interactions as each runqueue will
-be responsible for the scheduling latency and fairness of the tasks only on its
-own runqueue, and to achieve fairness and low latency across multiple CPUs, any
-advantage in throughput of having CPU local tasks causes other disadvantages.
-This is due to requiring a very complex balancing system to at best achieve some
-semblance of fairness across CPUs and can only maintain relatively low latency
-for tasks bound to the same CPUs, not across them. To increase said fairness
-and latency across CPUs, the advantage of local runqueue locking, which makes
-for better scalability, is lost due to having to grab multiple locks.
-
-A significant feature of BFS is that all accounting is done purely based on CPU
-used and nowhere is sleep time used in any way to determine entitlement or
-interactivity. Interactivity "estimators" that use some kind of sleep/run
-algorithm are doomed to fail to detect all interactive tasks, and to falsely tag
-tasks that aren't interactive as being so. The reason for this is that it is
-close to impossible to determine that when a task is sleeping, whether it is
-doing it voluntarily, as in a userspace application waiting for input in the
-form of a mouse click or otherwise, or involuntarily, because it is waiting for
-another thread, process, I/O, kernel activity or whatever. Thus, such an
-estimator will introduce corner cases, and more heuristics will be required to
-cope with those corner cases, introducing more corner cases and failed
-interactivity detection and so on. Interactivity in BFS is built into the design
-by virtue of the fact that tasks that are waking up have not used up their quota
-of CPU time, and have earlier effective deadlines, thereby making it very likely
-they will preempt any CPU bound task of equivalent nice level. See below for
-more information on the virtual deadline mechanism. Even if they do not preempt
-a running task, because the rr interval is guaranteed to have a bound upper
-limit on how long a task will wait for, it will be scheduled within a timeframe
-that will not cause visible interface jitter.
-
-
-Design details.
-
-Task insertion.
-
-BFS inserts tasks into each relevant queue as an O(1) insertion into a double
-linked list. On insertion, *every* running queue is checked to see if the newly
-queued task can run on any idle queue, or preempt the lowest running task on the
-system. This is how the cross-CPU scheduling of BFS achieves significantly lower
-latency per extra CPU the system has. In this case the lookup is, in the worst
-case scenario, O(n) where n is the number of CPUs on the system.
-
-Data protection.
-
-BFS has one single lock protecting the process local data of every task in the
-global queue. Thus every insertion, removal and modification of task data in the
-global runqueue needs to grab the global lock. However, once a task is taken by
-a CPU, the CPU has its own local data copy of the running process' accounting
-information which only that CPU accesses and modifies (such as during a
-timer tick) thus allowing the accounting data to be updated lockless. Once a
-CPU has taken a task to run, it removes it from the global queue. Thus the
-global queue only ever has, at most,
-
-	(number of tasks requesting cpu time) - (number of logical CPUs) + 1
-
-tasks in the global queue. This value is relevant for the time taken to look up
-tasks during scheduling. This will increase if many tasks with CPU affinity set
-in their policy to limit which CPUs they're allowed to run on if they outnumber
-the number of CPUs. The +1 is because when rescheduling a task, the CPU's
-currently running task is put back on the queue. Lookup will be described after
-the virtual deadline mechanism is explained.
-
-Virtual deadline.
-
-The key to achieving low latency, scheduling fairness, and "nice level"
-distribution in BFS is entirely in the virtual deadline mechanism. The one
-tunable in BFS is the rr_interval, or "round robin interval". This is the
-maximum time two SCHED_OTHER (or SCHED_NORMAL, the common scheduling policy)
-tasks of the same nice level will be running for, or looking at it the other
-way around, the longest duration two tasks of the same nice level will be
-delayed for. When a task requests cpu time, it is given a quota (time_slice)
-equal to the rr_interval and a virtual deadline. The virtual deadline is
-offset from the current time in jiffies by this equation:
-
-	jiffies + (prio_ratio * rr_interval)
-
-The prio_ratio is determined as a ratio compared to the baseline of nice -20
-and increases by 10% per nice level. The deadline is a virtual one only in that
-no guarantee is placed that a task will actually be scheduled by this time, but
-it is used to compare which task should go next. There are three components to
-how a task is next chosen. First is time_slice expiration. If a task runs out
-of its time_slice, it is descheduled, the time_slice is refilled, and the
-deadline reset to that formula above. Second is sleep, where a task no longer
-is requesting CPU for whatever reason. The time_slice and deadline are _not_
-adjusted in this case and are just carried over for when the task is next
-scheduled. Third is preemption, and that is when a newly waking task is deemed
-higher priority than a currently running task on any cpu by virtue of the fact
-that it has an earlier virtual deadline than the currently running task. The
-earlier deadline is the key to which task is next chosen for the first and
-second cases. Once a task is descheduled, it is put back on the queue, and an
-O(n) lookup of all queued-but-not-running tasks is done to determine which has
-the earliest deadline and that task is chosen to receive CPU next.
-
-The CPU proportion of different nice tasks works out to be approximately the
-
-	(prio_ratio difference)^2
-
-The reason it is squared is that a task's deadline does not change while it is
-running unless it runs out of time_slice. Thus, even if the time actually
-passes the deadline of another task that is queued, it will not get CPU time
-unless the current running task deschedules, and the time "base" (jiffies) is
-constantly moving.
-
-Task lookup.
-
-BFS has 103 priority queues. 100 of these are dedicated to the static priority
-of realtime tasks, and the remaining 3 are, in order of best to worst priority,
-SCHED_ISO (isochronous), SCHED_NORMAL, and SCHED_IDLEPRIO (idle priority
-scheduling). When a task of these priorities is queued, a bitmap of running
-priorities is set showing which of these priorities has tasks waiting for CPU
-time. When a CPU is made to reschedule, the lookup for the next task to get
-CPU time is performed in the following way:
-
-First the bitmap is checked to see what static priority tasks are queued. If
-any realtime priorities are found, the corresponding queue is checked and the
-first task listed there is taken (provided CPU affinity is suitable) and lookup
-is complete. If the priority corresponds to a SCHED_ISO task, they are also
-taken in FIFO order (as they behave like SCHED_RR). If the priority corresponds
-to either SCHED_NORMAL or SCHED_IDLEPRIO, then the lookup becomes O(n). At this
-stage, every task in the runlist that corresponds to that priority is checked
-to see which has the earliest set deadline, and (provided it has suitable CPU
-affinity) it is taken off the runqueue and given the CPU. If a task has an
-expired deadline, it is taken and the rest of the lookup aborted (as they are
-chosen in FIFO order).
-
-Thus, the lookup is O(n) in the worst case only, where n is as described
-earlier, as tasks may be chosen before the whole task list is looked over.
-
-
-Scalability.
-
-The major limitations of BFS will be that of scalability, as the separate
-runqueue designs will have less lock contention as the number of CPUs rises.
-However they do not scale linearly even with separate runqueues as multiple
-runqueues will need to be locked concurrently on such designs to be able to
-achieve fair CPU balancing, to try and achieve some sort of nice-level fairness
-across CPUs, and to achieve low enough latency for tasks on a busy CPU when
-other CPUs would be more suited. BFS has the advantage that it requires no
-balancing algorithm whatsoever, as balancing occurs by proxy simply because
-all CPUs draw off the global runqueue, in priority and deadline order. Despite
-the fact that scalability is _not_ the prime concern of BFS, it both shows very
-good scalability to smaller numbers of CPUs and is likely a more scalable design
-at these numbers of CPUs.
-
-It also has some very low overhead scalability features built into the design
-when it has been deemed their overhead is so marginal that they're worth adding.
-The first is the local copy of the running process' data to the CPU it's running
-on to allow that data to be updated lockless where possible. Then there is
-deference paid to the last CPU a task was running on, by trying that CPU first
-when looking for an idle CPU to use the next time it's scheduled. Finally there
-is the notion of "sticky" tasks that are flagged when they are involuntarily
-descheduled, meaning they still want further CPU time. This sticky flag is
-used to bias heavily against those tasks being scheduled on a different CPU
-unless that CPU would be otherwise idle. When a cpu frequency governor is used
-that scales with CPU load, such as ondemand, sticky tasks are not scheduled
-on a different CPU at all, preferring instead to go idle. This means the CPU
-they were bound to is more likely to increase its speed while the other CPU
-will go idle, thus speeding up total task execution time and likely decreasing
-power usage. This is the only scenario where BFS will allow a CPU to go idle
-in preference to scheduling a task on the earliest available spare CPU.
-
-The real cost of migrating a task from one CPU to another is entirely dependant
-on the cache footprint of the task, how cache intensive the task is, how long
-it's been running on that CPU to take up the bulk of its cache, how big the CPU
-cache is, how fast and how layered the CPU cache is, how fast a context switch
-is... and so on. In other words, it's close to random in the real world where we
-do more than just one sole workload. The only thing we can be sure of is that
-it's not free. So BFS uses the principle that an idle CPU is a wasted CPU and
-utilising idle CPUs is more important than cache locality, and cache locality
-only plays a part after that.
-
-When choosing an idle CPU for a waking task, the cache locality is determined
-according to where the task last ran and then idle CPUs are ranked from best
-to worst to choose the most suitable idle CPU based on cache locality, NUMA
-node locality and hyperthread sibling business. They are chosen in the
-following preference (if idle):
-
-* Same core, idle or busy cache, idle threads
-* Other core, same cache, idle or busy cache, idle threads.
-* Same node, other CPU, idle cache, idle threads.
-* Same node, other CPU, busy cache, idle threads.
-* Same core, busy threads.
-* Other core, same cache, busy threads.
-* Same node, other CPU, busy threads.
-* Other node, other CPU, idle cache, idle threads.
-* Other node, other CPU, busy cache, idle threads.
-* Other node, other CPU, busy threads.
-
-This shows the SMT or "hyperthread" awareness in the design as well which will
-choose a real idle core first before a logical SMT sibling which already has
-tasks on the physical CPU.
-
-Early benchmarking of BFS suggested scalability dropped off at the 16 CPU mark.
-However this benchmarking was performed on an earlier design that was far less
-scalable than the current one so it's hard to know how scalable it is in terms
-of both CPUs (due to the global runqueue) and heavily loaded machines (due to
-O(n) lookup) at this stage. Note that in terms of scalability, the number of
-_logical_ CPUs matters, not the number of _physical_ CPUs. Thus, a dual (2x)
-quad core (4X) hyperthreaded (2X) machine is effectively a 16X. Newer benchmark
-results are very promising indeed, without needing to tweak any knobs, features
-or options. Benchmark contributions are most welcome.
-
-
-Features
-
-As the initial prime target audience for BFS was the average desktop user, it
-was designed to not need tweaking, tuning or have features set to obtain benefit
-from it. Thus the number of knobs and features has been kept to an absolute
-minimum and should not require extra user input for the vast majority of cases.
-There are precisely 2 tunables, and 2 extra scheduling policies. The rr_interval
-and iso_cpu tunables, and the SCHED_ISO and SCHED_IDLEPRIO policies. In addition
-to this, BFS also uses sub-tick accounting. What BFS does _not_ now feature is
-support for CGROUPS. The average user should neither need to know what these
-are, nor should they need to be using them to have good desktop behaviour.
-
-rr_interval
-
-There is only one "scheduler" tunable, the round robin interval. This can be
-accessed in
-
-	/proc/sys/kernel/rr_interval
-
-The value is in milliseconds, and the default value is set to 6ms. Valid values
-are from 1 to 1000. Decreasing the value will decrease latencies at the cost of
-decreasing throughput, while increasing it will improve throughput, but at the
-cost of worsening latencies. The accuracy of the rr interval is limited by HZ
-resolution of the kernel configuration. Thus, the worst case latencies are
-usually slightly higher than this actual value. BFS uses "dithering" to try and
-minimise the effect the Hz limitation has. The default value of 6 is not an
-arbitrary one. It is based on the fact that humans can detect jitter at
-approximately 7ms, so aiming for much lower latencies is pointless under most
-circumstances. It is worth noting this fact when comparing the latency
-performance of BFS to other schedulers. Worst case latencies being higher than
-7ms are far worse than average latencies not being in the microsecond range.
-Experimentation has shown that rr intervals being increased up to 300 can
-improve throughput but beyond that, scheduling noise from elsewhere prevents
-further demonstrable throughput.
-
-Isochronous scheduling.
-
-Isochronous scheduling is a unique scheduling policy designed to provide
-near-real-time performance to unprivileged (ie non-root) users without the
-ability to starve the machine indefinitely. Isochronous tasks (which means
-"same time") are set using, for example, the schedtool application like so:
-
-	schedtool -I -e amarok
-
-This will start the audio application "amarok" as SCHED_ISO. How SCHED_ISO works
-is that it has a priority level between true realtime tasks and SCHED_NORMAL
-which would allow them to preempt all normal tasks, in a SCHED_RR fashion (ie,
-if multiple SCHED_ISO tasks are running, they purely round robin at rr_interval
-rate). However if ISO tasks run for more than a tunable finite amount of time,
-they are then demoted back to SCHED_NORMAL scheduling. This finite amount of
-time is the percentage of _total CPU_ available across the machine, configurable
-as a percentage in the following "resource handling" tunable (as opposed to a
-scheduler tunable):
-
-	/proc/sys/kernel/iso_cpu
-
-and is set to 70% by default. It is calculated over a rolling 5 second average
-Because it is the total CPU available, it means that on a multi CPU machine, it
-is possible to have an ISO task running as realtime scheduling indefinitely on
-just one CPU, as the other CPUs will be available. Setting this to 100 is the
-equivalent of giving all users SCHED_RR access and setting it to 0 removes the
-ability to run any pseudo-realtime tasks.
-
-A feature of BFS is that it detects when an application tries to obtain a
-realtime policy (SCHED_RR or SCHED_FIFO) and the caller does not have the
-appropriate privileges to use those policies. When it detects this, it will
-give the task SCHED_ISO policy instead. Thus it is transparent to the user.
-Because some applications constantly set their policy as well as their nice
-level, there is potential for them to undo the override specified by the user
-on the command line of setting the policy to SCHED_ISO. To counter this, once
-a task has been set to SCHED_ISO policy, it needs superuser privileges to set
-it back to SCHED_NORMAL. This will ensure the task remains ISO and all child
-processes and threads will also inherit the ISO policy.
-
-Idleprio scheduling.
-
-Idleprio scheduling is a scheduling policy designed to give out CPU to a task
-_only_ when the CPU would be otherwise idle. The idea behind this is to allow
-ultra low priority tasks to be run in the background that have virtually no
-effect on the foreground tasks. This is ideally suited to distributed computing
-clients (like setiathome, folding, mprime etc) but can also be used to start
-a video encode or so on without any slowdown of other tasks. To avoid this
-policy from grabbing shared resources and holding them indefinitely, if it
-detects a state where the task is waiting on I/O, the machine is about to
-suspend to ram and so on, it will transiently schedule them as SCHED_NORMAL. As
-per the Isochronous task management, once a task has been scheduled as IDLEPRIO,
-it cannot be put back to SCHED_NORMAL without superuser privileges. Tasks can
-be set to start as SCHED_IDLEPRIO with the schedtool command like so:
-
-	schedtool -D -e ./mprime
-
-Subtick accounting.
-
-It is surprisingly difficult to get accurate CPU accounting, and in many cases,
-the accounting is done by simply determining what is happening at the precise
-moment a timer tick fires off. This becomes increasingly inaccurate as the
-timer tick frequency (HZ) is lowered. It is possible to create an application
-which uses almost 100% CPU, yet by being descheduled at the right time, records
-zero CPU usage. While the main problem with this is that there are possible
-security implications, it is also difficult to determine how much CPU a task
-really does use. BFS tries to use the sub-tick accounting from the TSC clock,
-where possible, to determine real CPU usage. This is not entirely reliable, but
-is far more likely to produce accurate CPU usage data than the existing designs
-and will not show tasks as consuming no CPU usage when they actually are. Thus,
-the amount of CPU reported as being used by BFS will more accurately represent
-how much CPU the task itself is using (as is shown for example by the 'time'
-application), so the reported values may be quite different to other schedulers.
-Values reported as the 'load' are more prone to problems with this design, but
-per process values are closer to real usage. When comparing throughput of BFS
-to other designs, it is important to compare the actual completed work in terms
-of total wall clock time taken and total work done, rather than the reported
-"cpu usage".
-
-
-Con Kolivas <kernel@kolivas.org> Tue, 5 Apr 2011
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index e52acdfb1..af70d1541 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -39,7 +39,6 @@ show up in /proc/sys/kernel:
 - hung_task_timeout_secs
 - hung_task_warnings
 - kexec_load_disabled
-- iso_cpu
 - kptr_restrict
 - kstack_depth_to_print       [ X86 only ]
 - l2cr                        [ PPC only ]
@@ -68,7 +67,6 @@ show up in /proc/sys/kernel:
 - randomize_va_space
 - real-root-dev               ==> Documentation/initrd.txt
 - reboot-cmd                  [ SPARC only ]
-- rr_interval
 - rtsig-max
 - rtsig-nr
 - sem
@@ -398,16 +396,6 @@ kernel stack.
 
 ==============================================================
 
-iso_cpu: (BFS CPU scheduler only).
-
-This sets the percentage cpu that the unprivileged SCHED_ISO tasks can
-run effectively at realtime priority, averaged over a rolling five
-seconds over the -whole- system, meaning all cpus.
-
-Set to 70 (percent) by default.
-
-==============================================================
-
 l2cr: (PPC only)
 
 This flag controls the L2 cache of G3 processor boards. If
@@ -747,20 +735,6 @@ rebooting. ???
 
 ==============================================================
 
-rr_interval: (BFS CPU scheduler only)
-
-This is the smallest duration that any cpu process scheduling unit
-will run for. Increasing this value can increase throughput of cpu
-bound tasks substantially but at the expense of increased latencies
-overall. Conversely decreasing it will decrease average and maximum
-latencies but at the expense of throughput. This value is in
-milliseconds and the default value chosen depends on the number of
-cpus available at scheduler initialisation with a minimum of 6.
-
-Valid values are from 1-1000.
-
-==============================================================
-
 rtsig-max & rtsig-nr:
 
 The file rtsig-max can be used to tune the maximum number
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index 4a15c90bc..0a94ffe17 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -537,17 +537,18 @@ relevant attribute files are usb2_hardware_lpm and usb3_hardware_lpm.
 		can write y/Y/1 or n/N/0 to the file to	enable/disable
 		USB2 hardware LPM manually. This is for	test purpose mainly.
 
-	power/usb3_hardware_lpm
+	power/usb3_hardware_lpm_u1
+	power/usb3_hardware_lpm_u2
 
 		When a USB 3.0 lpm-capable device is plugged in to a
 		xHCI host which supports link PM, it will check if U1
 		and U2 exit latencies have been set in the BOS
 		descriptor; if the check is is passed and the host
 		supports USB3 hardware LPM, USB3 hardware LPM will be
-		enabled for the device and this file will be created.
-		The file holds a string value (enable or disable)
-		indicating whether or not USB3 hardware LPM is
-		enabled for the device.
+		enabled for the device and these files will be created.
+		The files hold a string value (enable or disable)
+		indicating whether or not USB3 hardware LPM U1 or U2
+		is enabled for the device.
 
 	USB Port Power Control
 	----------------------