Initial import

1 files changed, 237 insertions, 0 deletions

diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
new file mode 100644
index 000000000..608f2a7fa
--- /dev/null
+++ b/arch/alpha/kernel/sys_jensen.c
@@ -0,0 +1,237 @@
+/*
+ *	linux/arch/alpha/kernel/sys_jensen.c
+ *
+ *	Copyright (C) 1995 Linus Torvalds
+ *	Copyright (C) 1998, 1999 Richard Henderson
+ *
+ * Code supporting the Jensen.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/ptrace.h>
+
+#define __EXTERN_INLINE inline
+#include <asm/io.h>
+#include <asm/jensen.h>
+#undef  __EXTERN_INLINE
+
+#include <asm/dma.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+#include "pci_impl.h"
+#include "machvec_impl.h"
+
+
+/*
+ * Jensen is special: the vector is 0x8X0 for EISA interrupt X, and
+ * 0x9X0 for the local motherboard interrupts.
+ *
+ * Note especially that those local interrupts CANNOT be masked,
+ * which causes much of the pain below...
+ *
+ *	0x660 - NMI
+ *
+ *	0x800 - IRQ0  interval timer (not used, as we use the RTC timer)
+ *	0x810 - IRQ1  line printer (duh..)
+ *	0x860 - IRQ6  floppy disk
+ *
+ *	0x900 - COM1
+ *	0x920 - COM2
+ *	0x980 - keyboard
+ *	0x990 - mouse
+ *
+ * PCI-based systems are more sane: they don't have the local
+ * interrupts at all, and have only normal PCI interrupts from
+ * devices.  Happily it's easy enough to do a sane mapping from the
+ * Jensen.
+ * 
+ * Note that this means that we may have to do a hardware
+ * "local_op" to a different interrupt than we report to the rest of the
+ * world.
+ */
+
+static void
+jensen_local_enable(struct irq_data *d)
+{
+	/* the parport is really hw IRQ 1, silly Jensen.  */
+	if (d->irq == 7)
+		i8259a_enable_irq(d);
+}
+
+static void
+jensen_local_disable(struct irq_data *d)
+{
+	/* the parport is really hw IRQ 1, silly Jensen.  */
+	if (d->irq == 7)
+		i8259a_disable_irq(d);
+}
+
+static void
+jensen_local_mask_ack(struct irq_data *d)
+{
+	/* the parport is really hw IRQ 1, silly Jensen.  */
+	if (d->irq == 7)
+		i8259a_mask_and_ack_irq(d);
+}
+
+static struct irq_chip jensen_local_irq_type = {
+	.name		= "LOCAL",
+	.irq_unmask	= jensen_local_enable,
+	.irq_mask	= jensen_local_disable,
+	.irq_mask_ack	= jensen_local_mask_ack,
+};
+
+static void 
+jensen_device_interrupt(unsigned long vector)
+{
+	int irq;
+
+	switch (vector) {
+	case 0x660:
+		printk("Whee.. NMI received. Probable hardware error\n");
+		printk("61=%02x, 461=%02x\n", inb(0x61), inb(0x461));
+		return;
+
+	/* local device interrupts: */
+	case 0x900: irq = 4; break;		/* com1 -> irq 4 */
+	case 0x920: irq = 3; break;		/* com2 -> irq 3 */
+	case 0x980: irq = 1; break;		/* kbd -> irq 1 */
+	case 0x990: irq = 9; break;		/* mouse -> irq 9 */
+
+	default:
+		if (vector > 0x900) {
+			printk("Unknown local interrupt %lx\n", vector);
+			return;
+		}
+
+		irq = (vector - 0x800) >> 4;
+		if (irq == 1)
+			irq = 7;
+		break;
+	}
+
+	/* If there is no handler yet... */
+	if (!irq_has_action(irq)) {
+	    /* If it is a local interrupt that cannot be masked... */
+	    if (vector >= 0x900)
+	    {
+	        /* Clear keyboard/mouse state */
+	    	inb(0x64);
+		inb(0x60);
+		/* Reset serial ports */
+		inb(0x3fa);
+		inb(0x2fa);
+		outb(0x0c, 0x3fc);
+		outb(0x0c, 0x2fc);
+		/* Clear NMI */
+		outb(0,0x61);
+		outb(0,0x461);
+	    }
+	}
+
+#if 0
+        /* A useful bit of code to find out if an interrupt is going wild.  */
+        {
+          static unsigned int last_msg = 0, last_cc = 0;
+          static int last_irq = -1, count = 0;
+          unsigned int cc;
+
+          __asm __volatile("rpcc %0" : "=r"(cc));
+          ++count;
+#define JENSEN_CYCLES_PER_SEC	(150000000)
+          if (cc - last_msg > ((JENSEN_CYCLES_PER_SEC) * 3) ||
+	      irq != last_irq) {
+                printk(KERN_CRIT " irq %d count %d cc %u @ %lx\n",
+                       irq, count, cc-last_cc, get_irq_regs()->pc);
+                count = 0;
+                last_msg = cc;
+                last_irq = irq;
+          }
+          last_cc = cc;
+        }
+#endif
+
+	handle_irq(irq);
+}
+
+static void __init
+jensen_init_irq(void)
+{
+	init_i8259a_irqs();
+
+	irq_set_chip_and_handler(1, &jensen_local_irq_type, handle_level_irq);
+	irq_set_chip_and_handler(4, &jensen_local_irq_type, handle_level_irq);
+	irq_set_chip_and_handler(3, &jensen_local_irq_type, handle_level_irq);
+	irq_set_chip_and_handler(7, &jensen_local_irq_type, handle_level_irq);
+	irq_set_chip_and_handler(9, &jensen_local_irq_type, handle_level_irq);
+
+	common_init_isa_dma();
+}
+
+static void __init
+jensen_init_arch(void)
+{
+	struct pci_controller *hose;
+#ifdef CONFIG_PCI
+	static struct pci_dev fake_isa_bridge = { .dma_mask = 0xffffffffUL, };
+
+	isa_bridge = &fake_isa_bridge;
+#endif
+
+	/* Create a hose so that we can report i/o base addresses to
+	   userland.  */
+
+	pci_isa_hose = hose = alloc_pci_controller();
+	hose->io_space = &ioport_resource;
+	hose->mem_space = &iomem_resource;
+	hose->index = 0;
+
+	hose->sparse_mem_base = EISA_MEM - IDENT_ADDR;
+	hose->dense_mem_base = 0;
+	hose->sparse_io_base = EISA_IO - IDENT_ADDR;
+	hose->dense_io_base = 0;
+
+	hose->sg_isa = hose->sg_pci = NULL;
+	__direct_map_base = 0;
+	__direct_map_size = 0xffffffff;
+}
+
+static void
+jensen_machine_check(unsigned long vector, unsigned long la)
+{
+	printk(KERN_CRIT "Machine check\n");
+}
+
+/*
+ * The System Vector
+ */
+
+struct alpha_machine_vector jensen_mv __initmv = {
+	.vector_name		= "Jensen",
+	DO_EV4_MMU,
+	IO_LITE(JENSEN,jensen),
+	.machine_check		= jensen_machine_check,
+	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
+	.rtc_port		= 0x170,
+
+	.nr_irqs		= 16,
+	.device_interrupt	= jensen_device_interrupt,
+
+	.init_arch		= jensen_init_arch,
+	.init_irq		= jensen_init_irq,
+	.init_rtc		= common_init_rtc,
+	.init_pci		= NULL,
+	.kill_arch		= NULL,
+};
+ALIAS_MV(jensen)