diff options
| author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2016-09-11 04:34:46 -0300 |
|---|---|---|
| committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2016-09-11 04:34:46 -0300 |
| commit | 863981e96738983919de841ec669e157e6bdaeb0 (patch) | |
| tree | d6d89a12e7eb8017837c057935a2271290907f76 /arch/arc/mm | |
| parent | 8dec7c70575785729a6a9e6719a955e9c545bcab (diff) | |
Linux-libre 4.7.1-gnupck-4.7.1-gnu
Diffstat (limited to 'arch/arc/mm')
| -rw-r--r-- | arch/arc/mm/cache.c | 6 | ||||
| -rw-r--r-- | arch/arc/mm/dma.c | 2 | ||||
| -rw-r--r-- | arch/arc/mm/tlb.c | 11 |
3 files changed, 15 insertions, 4 deletions
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 9e5eddbb8..5a294b2c3 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -215,7 +215,7 @@ slc_chk: * ------------------ * This ver of MMU supports variable page sizes (1k-16k): although Linux will * only support 8k (default), 16k and 4k. - * However from hardware perspective, smaller page sizes aggrevate aliasing + * However from hardware perspective, smaller page sizes aggravate aliasing * meaning more vaddr bits needed to disambiguate the cache-line-op ; * the existing scheme of piggybacking won't work for certain configurations. * Two new registers IC_PTAG and DC_PTAG inttoduced. @@ -302,7 +302,7 @@ void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr, /* * This is technically for MMU v4, using the MMU v3 programming model - * Special work for HS38 aliasing I-cache configuratino with PAE40 + * Special work for HS38 aliasing I-cache configuration with PAE40 * - upper 8 bits of paddr need to be written into PTAG_HI * - (and needs to be written before the lower 32 bits) * Note that PTAG_HI is hoisted outside the line loop @@ -936,7 +936,7 @@ void arc_cache_init(void) ic->ver, CONFIG_ARC_MMU_VER); /* - * In MMU v4 (HS38x) the alising icache config uses IVIL/PTAG + * In MMU v4 (HS38x) the aliasing icache config uses IVIL/PTAG * pair to provide vaddr/paddr respectively, just as in MMU v3 */ if (is_isa_arcv2() && ic->alias) diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c index 8c8e36fa5..73d7e4c75 100644 --- a/arch/arc/mm/dma.c +++ b/arch/arc/mm/dma.c @@ -10,7 +10,7 @@ * DMA Coherent API Notes * * I/O is inherently non-coherent on ARC. So a coherent DMA buffer is - * implemented by accessintg it using a kernel virtual address, with + * implemented by accessing it using a kernel virtual address, with * Cache bit off in the TLB entry. * * The default DMA address == Phy address which is 0x8000_0000 based. diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c index 7046c12c5..ec868a908 100644 --- a/arch/arc/mm/tlb.c +++ b/arch/arc/mm/tlb.c @@ -814,6 +814,17 @@ void arc_mmu_init(void) printk(arc_mmu_mumbojumbo(0, str, sizeof(str))); + /* + * Can't be done in processor.h due to header include depenedencies + */ + BUILD_BUG_ON(!IS_ALIGNED((CONFIG_ARC_KVADDR_SIZE << 20), PMD_SIZE)); + + /* + * stack top size sanity check, + * Can't be done in processor.h due to header include depenedencies + */ + BUILD_BUG_ON(!IS_ALIGNED(STACK_TOP, PMD_SIZE)); + /* For efficiency sake, kernel is compile time built for a MMU ver * This must match the hardware it is running on. * Linux built for MMU V2, if run on MMU V1 will break down because V1 |