summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/am33xx.dtsi
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-10-20 00:10:27 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-10-20 00:10:27 -0300
commitd0b2f91bede3bd5e3d24dd6803e56eee959c1797 (patch)
tree7fee4ab0509879c373c4f2cbd5b8a5be5b4041ee /arch/arm/boot/dts/am33xx.dtsi
parente914f8eb445e8f74b00303c19c2ffceaedd16a05 (diff)
Linux-libre 4.8.2-gnupck-4.8.2-gnu
Diffstat (limited to 'arch/arm/boot/dts/am33xx.dtsi')
-rw-r--r--arch/arm/boot/dts/am33xx.dtsi129
1 files changed, 101 insertions, 28 deletions
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 201bccbee..559977228 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -45,19 +45,9 @@
device_type = "cpu";
reg = <0>;
- /*
- * To consider voltage drop between PMIC and SoC,
- * tolerance value is reduced to 2% from 4% and
- * voltage value is increased as a precaution.
- */
- operating-points = <
- /* kHz uV */
- 720000 1285000
- 600000 1225000
- 500000 1125000
- 275000 1125000
- >;
- voltage-tolerance = <2>; /* 2 percentage */
+ operating-points-v2 = <&cpu0_opp_table>;
+ ti,syscon-efuse = <&scm_conf 0x7fc 0x1fff 0>;
+ ti,syscon-rev = <&scm_conf 0x600>;
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
@@ -66,6 +56,78 @@
};
};
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+
+ /*
+ * The three following nodes are marked with opp-suspend
+ * because the can not be enabled simultaneously on a
+ * single SoC.
+ */
+ opp50@300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <950000 931000 969000>;
+ opp-supported-hw = <0x06 0x0010>;
+ opp-suspend;
+ };
+
+ opp100@275000000 {
+ opp-hz = /bits/ 64 <275000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x01 0x00FF>;
+ opp-suspend;
+ };
+
+ opp100@300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x06 0x0020>;
+ opp-suspend;
+ };
+
+ opp100@500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x01 0xFFFF>;
+ };
+
+ opp100@600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x06 0x0040>;
+ };
+
+ opp120@600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1200000 1176000 1224000>;
+ opp-supported-hw = <0x01 0xFFFF>;
+ };
+
+ opp120@720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <1200000 1176000 1224000>;
+ opp-supported-hw = <0x06 0x0080>;
+ };
+
+ oppturbo@720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <1260000 1234800 1285200>;
+ opp-supported-hw = <0x01 0xFFFF>;
+ };
+
+ oppturbo@800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1260000 1234800 1285200>;
+ opp-supported-hw = <0x06 0x0100>;
+ };
+
+ oppnitro@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1325000 1298500 1351500>;
+ opp-supported-hw = <0x04 0x0200>;
+ };
+ };
+
pmu {
compatible = "arm,cortex-a8-pmu";
interrupts = <3>;
@@ -187,7 +249,7 @@
reg = <0x49000000 0x10000>;
reg-names = "edma3_cc";
interrupts = <12 13 14>;
- interrupt-names = "edma3_ccint", "emda3_mperr",
+ interrupt-names = "edma3_ccint", "edma3_mperr",
"edma3_ccerrint";
dma-requests = <64>;
#dma-cells = <2>;
@@ -679,20 +741,24 @@
0x48300200 0x48300200 0x80>; /* EHRPWM */
ecap0: ecap@48300100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <31>;
interrupt-names = "ecap0";
- ti,hwmods = "ecap0";
status = "disabled";
};
ehrpwm0: pwm@48300200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
- ti,hwmods = "ehrpwm0";
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -709,20 +775,24 @@
0x48302200 0x48302200 0x80>; /* EHRPWM */
ecap1: ecap@48302100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <47>;
interrupt-names = "ecap1";
- ti,hwmods = "ecap1";
status = "disabled";
};
ehrpwm1: pwm@48302200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
- ti,hwmods = "ehrpwm1";
+ clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -739,20 +809,24 @@
0x48304200 0x48304200 0x80>; /* EHRPWM */
ecap2: ecap@48304100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48304100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <61>;
interrupt-names = "ecap2";
- ti,hwmods = "ecap2";
status = "disabled";
};
ehrpwm2: pwm@48304200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
- ti,hwmods = "ehrpwm2";
+ clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
@@ -766,7 +840,6 @@
ale_entries = <1024>;
bd_ram_size = <0x2000>;
no_bd_ram = <0>;
- rx_descs = <64>;
mac_control = <0x20>;
slaves = <2>;
active_slave = <0>;
@@ -789,7 +862,7 @@
status = "disabled";
davinci_mdio: mdio@4a101000 {
- compatible = "ti,davinci_mdio";
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "davinci_mdio";