Initial import

1 files changed, 193 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
new file mode 100644
index 000000000..800b379d3
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -0,0 +1,193 @@
+/*
+ * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap36xx.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	vemmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VEMMC";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		gpio = <&gpio5 29 0>; /* gpio line 157 */
+		startup-delay-us = <150>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+			0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2900000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&twl {
+	compatible = "ti,twl5031";
+
+	twl_power: power {
+		compatible = "ti,twl4030-power";
+		ti,use_poweroff;
+	};
+};
+
+&twl_gpio {
+	ti,pullups	= <0x000001>; /* BIT(0) */
+	ti,pulldowns	= <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
+};
+
+/* CSI-2 receiver */
+&vaux2 {
+	regulator-name = "vaux2";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+/* Cameras */
+&vaux3 {
+	regulator-name = "vaux3";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vemmc>;
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x1000000>;	/* CS0: 16MB for OneNAND */
+
+	onenand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <87>;
+		gpmc,cs-wr-off-ns = <87>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <87>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <87>;
+		gpmc,rd-cycle-ns = <112>;
+		gpmc,wr-cycle-ns = <112>;
+		gpmc,access-ns = <81>;
+		gpmc,page-burst-access-ns = <15>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <81>;
+		gpmc,sync-clk-ps = <15000>;
+
+		/*
+		 * MTD partition table corresponding to Nokia's MeeGo 1.2
+		 * Harmattan release.
+		 */
+		partition@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00100000>;
+		};
+		partition@1 {
+			label = "config";
+			reg = <0x00100000 0x002c0000>;
+		};
+		partition@2 {
+			label = "kernel";
+			reg = <0x003c0000 0x01000000>;
+		};
+		partition@3 {
+			label = "log";
+			reg = <0x013c0000 0x00200000>;
+		};
+		partition@4 {
+			label = "var";
+			reg = <0x015c0000 0x1ca40000>;
+		};
+		partition@5 {
+			label = "moslo";
+			reg = <0x1e000000 0x02000000>;
+		};
+		partition@6 {
+			label = "omap2-onenand";
+			reg = <0x00000000 0x20000000>;
+		};
+	};
+};