Initial import

1 files changed, 1456 insertions, 0 deletions

diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
new file mode 100644
index 000000000..5cc779c8e
--- /dev/null
+++ b/arch/arm/common/sa1111.c
@@ -0,0 +1,1456 @@
+/*
+ * linux/arch/arm/common/sa1111.c
+ *
+ * SA1111 support
+ *
+ * Original code by John Dorsey
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains all generic SA1111 support.
+ *
+ * All initialization functions provided here are intended to be called
+ * from machine specific code with proper arguments when required.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+#include <asm/sizes.h>
+
+#include <asm/hardware/sa1111.h>
+
+/* SA1111 IRQs */
+#define IRQ_GPAIN0		(0)
+#define IRQ_GPAIN1		(1)
+#define IRQ_GPAIN2		(2)
+#define IRQ_GPAIN3		(3)
+#define IRQ_GPBIN0		(4)
+#define IRQ_GPBIN1		(5)
+#define IRQ_GPBIN2		(6)
+#define IRQ_GPBIN3		(7)
+#define IRQ_GPBIN4		(8)
+#define IRQ_GPBIN5		(9)
+#define IRQ_GPCIN0		(10)
+#define IRQ_GPCIN1		(11)
+#define IRQ_GPCIN2		(12)
+#define IRQ_GPCIN3		(13)
+#define IRQ_GPCIN4		(14)
+#define IRQ_GPCIN5		(15)
+#define IRQ_GPCIN6		(16)
+#define IRQ_GPCIN7		(17)
+#define IRQ_MSTXINT		(18)
+#define IRQ_MSRXINT		(19)
+#define IRQ_MSSTOPERRINT	(20)
+#define IRQ_TPTXINT		(21)
+#define IRQ_TPRXINT		(22)
+#define IRQ_TPSTOPERRINT	(23)
+#define SSPXMTINT		(24)
+#define SSPRCVINT		(25)
+#define SSPROR			(26)
+#define AUDXMTDMADONEA		(32)
+#define AUDRCVDMADONEA		(33)
+#define AUDXMTDMADONEB		(34)
+#define AUDRCVDMADONEB		(35)
+#define AUDTFSR			(36)
+#define AUDRFSR			(37)
+#define AUDTUR			(38)
+#define AUDROR			(39)
+#define AUDDTS			(40)
+#define AUDRDD			(41)
+#define AUDSTO			(42)
+#define IRQ_USBPWR		(43)
+#define IRQ_HCIM		(44)
+#define IRQ_HCIBUFFACC		(45)
+#define IRQ_HCIRMTWKP		(46)
+#define IRQ_NHCIMFCIR		(47)
+#define IRQ_USB_PORT_RESUME	(48)
+#define IRQ_S0_READY_NINT	(49)
+#define IRQ_S1_READY_NINT	(50)
+#define IRQ_S0_CD_VALID		(51)
+#define IRQ_S1_CD_VALID		(52)
+#define IRQ_S0_BVD1_STSCHG	(53)
+#define IRQ_S1_BVD1_STSCHG	(54)
+#define SA1111_IRQ_NR		(55)
+
+extern void sa1110_mb_enable(void);
+extern void sa1110_mb_disable(void);
+
+/*
+ * We keep the following data for the overall SA1111.  Note that the
+ * struct device and struct resource are "fake"; they should be supplied
+ * by the bus above us.  However, in the interests of getting all SA1111
+ * drivers converted over to the device model, we provide this as an
+ * anchor point for all the other drivers.
+ */
+struct sa1111 {
+	struct device	*dev;
+	struct clk	*clk;
+	unsigned long	phys;
+	int		irq;
+	int		irq_base;	/* base for cascaded on-chip IRQs */
+	spinlock_t	lock;
+	void __iomem	*base;
+	struct sa1111_platform_data *pdata;
+#ifdef CONFIG_PM
+	void		*saved_state;
+#endif
+};
+
+/*
+ * We _really_ need to eliminate this.  Its only users
+ * are the PWM and DMA checking code.
+ */
+static struct sa1111 *g_sa1111;
+
+struct sa1111_dev_info {
+	unsigned long	offset;
+	unsigned long	skpcr_mask;
+	bool		dma;
+	unsigned int	devid;
+	unsigned int	irq[6];
+};
+
+static struct sa1111_dev_info sa1111_devices[] = {
+	{
+		.offset		= SA1111_USB,
+		.skpcr_mask	= SKPCR_UCLKEN,
+		.dma		= true,
+		.devid		= SA1111_DEVID_USB,
+		.irq = {
+			IRQ_USBPWR,
+			IRQ_HCIM,
+			IRQ_HCIBUFFACC,
+			IRQ_HCIRMTWKP,
+			IRQ_NHCIMFCIR,
+			IRQ_USB_PORT_RESUME
+		},
+	},
+	{
+		.offset		= 0x0600,
+		.skpcr_mask	= SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
+		.dma		= true,
+		.devid		= SA1111_DEVID_SAC,
+		.irq = {
+			AUDXMTDMADONEA,
+			AUDXMTDMADONEB,
+			AUDRCVDMADONEA,
+			AUDRCVDMADONEB
+		},
+	},
+	{
+		.offset		= 0x0800,
+		.skpcr_mask	= SKPCR_SCLKEN,
+		.devid		= SA1111_DEVID_SSP,
+	},
+	{
+		.offset		= SA1111_KBD,
+		.skpcr_mask	= SKPCR_PTCLKEN,
+		.devid		= SA1111_DEVID_PS2_KBD,
+		.irq = {
+			IRQ_TPRXINT,
+			IRQ_TPTXINT
+		},
+	},
+	{
+		.offset		= SA1111_MSE,
+		.skpcr_mask	= SKPCR_PMCLKEN,
+		.devid		= SA1111_DEVID_PS2_MSE,
+		.irq = {
+			IRQ_MSRXINT,
+			IRQ_MSTXINT
+		},
+	},
+	{
+		.offset		= 0x1800,
+		.skpcr_mask	= 0,
+		.devid		= SA1111_DEVID_PCMCIA,
+		.irq = {
+			IRQ_S0_READY_NINT,
+			IRQ_S0_CD_VALID,
+			IRQ_S0_BVD1_STSCHG,
+			IRQ_S1_READY_NINT,
+			IRQ_S1_CD_VALID,
+			IRQ_S1_BVD1_STSCHG,
+		},
+	},
+};
+
+/*
+ * SA1111 interrupt support.  Since clearing an IRQ while there are
+ * active IRQs causes the interrupt output to pulse, the upper levels
+ * will call us again if there are more interrupts to process.
+ */
+static void
+sa1111_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int stat0, stat1, i;
+	struct sa1111 *sachip = irq_get_handler_data(irq);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
+
+	stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0);
+	stat1 = sa1111_readl(mapbase + SA1111_INTSTATCLR1);
+
+	sa1111_writel(stat0, mapbase + SA1111_INTSTATCLR0);
+
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
+
+	sa1111_writel(stat1, mapbase + SA1111_INTSTATCLR1);
+
+	if (stat0 == 0 && stat1 == 0) {
+		do_bad_IRQ(irq, desc);
+		return;
+	}
+
+	for (i = 0; stat0; i++, stat0 >>= 1)
+		if (stat0 & 1)
+			generic_handle_irq(i + sachip->irq_base);
+
+	for (i = 32; stat1; i++, stat1 >>= 1)
+		if (stat1 & 1)
+			generic_handle_irq(i + sachip->irq_base);
+
+	/* For level-based interrupts */
+	desc->irq_data.chip->irq_unmask(&desc->irq_data);
+}
+
+#define SA1111_IRQMASK_LO(x)	(1 << (x - sachip->irq_base))
+#define SA1111_IRQMASK_HI(x)	(1 << (x - sachip->irq_base - 32))
+
+static void sa1111_ack_irq(struct irq_data *d)
+{
+}
+
+static void sa1111_mask_lowirq(struct irq_data *d)
+{
+	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
+	unsigned long ie0;
+
+	ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
+	ie0 &= ~SA1111_IRQMASK_LO(d->irq);
+	writel(ie0, mapbase + SA1111_INTEN0);
+}
+
+static void sa1111_unmask_lowirq(struct irq_data *d)
+{
+	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
+	unsigned long ie0;
+
+	ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
+	ie0 |= SA1111_IRQMASK_LO(d->irq);
+	sa1111_writel(ie0, mapbase + SA1111_INTEN0);
+}
+
+/*
+ * Attempt to re-trigger the interrupt.  The SA1111 contains a register
+ * (INTSET) which claims to do this.  However, in practice no amount of
+ * manipulation of INTEN and INTSET guarantees that the interrupt will
+ * be triggered.  In fact, its very difficult, if not impossible to get
+ * INTSET to re-trigger the interrupt.
+ */
+static int sa1111_retrigger_lowirq(struct irq_data *d)
+{
+	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
+	unsigned int mask = SA1111_IRQMASK_LO(d->irq);
+	unsigned long ip0;
+	int i;
+
+	ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
+	for (i = 0; i < 8; i++) {
+		sa1111_writel(ip0 ^ mask, mapbase + SA1111_INTPOL0);
+		sa1111_writel(ip0, mapbase + SA1111_INTPOL0);
+		if (sa1111_readl(mapbase + SA1111_INTSTATCLR0) & mask)
+			break;
+	}
+
+	if (i == 8)
+		pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n",
+		       d->irq);
+	return i == 8 ? -1 : 0;
+}
+
+static int sa1111_type_lowirq(struct irq_data *d, unsigned int flags)
+{
+	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
+	unsigned int mask = SA1111_IRQMASK_LO(d->irq);
+	unsigned long ip0;
+
+	if (flags == IRQ_TYPE_PROBE)
+		return 0;
+
+	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
+		return -EINVAL;
+
+	ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
+	if (flags & IRQ_TYPE_EDGE_RISING)
+		ip0 &= ~mask;
+	else
+		ip0 |= mask;
+	sa1111_writel(ip0, mapbase + SA1111_INTPOL0);
+	sa1111_writel(ip0, mapbase + SA1111_WAKEPOL0);
+
+	return 0;
+}
+
+static int sa1111_wake_lowirq(struct irq_data *d, unsigned int on)
+{
+	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
+	unsigned int mask = SA1111_IRQMASK_LO(d->irq);
+	unsigned long we0;
+
+	we0 = sa1111_readl(mapbase + SA1111_WAKEEN0);
+	if (on)
+		we0 |= mask;
+	else
+		we0 &= ~mask;
+	sa1111_writel(we0, mapbase + SA1111_WAKEEN0);
+
+	return 0;
+}
+
+static struct irq_chip sa1111_low_chip = {
+	.name		= "SA1111-l",
+	.irq_ack	= sa1111_ack_irq,
+	.irq_mask	= sa1111_mask_lowirq,
+	.irq_unmask	= sa1111_unmask_lowirq,
+	.irq_retrigger	= sa1111_retrigger_lowirq,
+	.irq_set_type	= sa1111_type_lowirq,
+	.irq_set_wake	= sa1111_wake_lowirq,
+};
+
+static void sa1111_mask_highirq(struct irq_data *d)
+{
+	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
+	unsigned long ie1;
+
+	ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
+	ie1 &= ~SA1111_IRQMASK_HI(d->irq);
+	sa1111_writel(ie1, mapbase + SA1111_INTEN1);
+}
+
+static void sa1111_unmask_highirq(struct irq_data *d)
+{
+	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
+	unsigned long ie1;
+
+	ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
+	ie1 |= SA1111_IRQMASK_HI(d->irq);
+	sa1111_writel(ie1, mapbase + SA1111_INTEN1);
+}
+
+/*
+ * Attempt to re-trigger the interrupt.  The SA1111 contains a register
+ * (INTSET) which claims to do this.  However, in practice no amount of
+ * manipulation of INTEN and INTSET guarantees that the interrupt will
+ * be triggered.  In fact, its very difficult, if not impossible to get
+ * INTSET to re-trigger the interrupt.
+ */
+static int sa1111_retrigger_highirq(struct irq_data *d)
+{
+	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
+	unsigned int mask = SA1111_IRQMASK_HI(d->irq);
+	unsigned long ip1;
+	int i;
+
+	ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
+	for (i = 0; i < 8; i++) {
+		sa1111_writel(ip1 ^ mask, mapbase + SA1111_INTPOL1);
+		sa1111_writel(ip1, mapbase + SA1111_INTPOL1);
+		if (sa1111_readl(mapbase + SA1111_INTSTATCLR1) & mask)
+			break;
+	}
+
+	if (i == 8)
+		pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n",
+		       d->irq);
+	return i == 8 ? -1 : 0;
+}
+
+static int sa1111_type_highirq(struct irq_data *d, unsigned int flags)
+{
+	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
+	unsigned int mask = SA1111_IRQMASK_HI(d->irq);
+	unsigned long ip1;
+
+	if (flags == IRQ_TYPE_PROBE)
+		return 0;
+
+	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
+		return -EINVAL;
+
+	ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
+	if (flags & IRQ_TYPE_EDGE_RISING)
+		ip1 &= ~mask;
+	else
+		ip1 |= mask;
+	sa1111_writel(ip1, mapbase + SA1111_INTPOL1);
+	sa1111_writel(ip1, mapbase + SA1111_WAKEPOL1);
+
+	return 0;
+}
+
+static int sa1111_wake_highirq(struct irq_data *d, unsigned int on)
+{
+	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
+	unsigned int mask = SA1111_IRQMASK_HI(d->irq);
+	unsigned long we1;
+
+	we1 = sa1111_readl(mapbase + SA1111_WAKEEN1);
+	if (on)
+		we1 |= mask;
+	else
+		we1 &= ~mask;
+	sa1111_writel(we1, mapbase + SA1111_WAKEEN1);
+
+	return 0;
+}
+
+static struct irq_chip sa1111_high_chip = {
+	.name		= "SA1111-h",
+	.irq_ack	= sa1111_ack_irq,
+	.irq_mask	= sa1111_mask_highirq,
+	.irq_unmask	= sa1111_unmask_highirq,
+	.irq_retrigger	= sa1111_retrigger_highirq,
+	.irq_set_type	= sa1111_type_highirq,
+	.irq_set_wake	= sa1111_wake_highirq,
+};
+
+static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
+{
+	void __iomem *irqbase = sachip->base + SA1111_INTC;
+	unsigned i, irq;
+	int ret;
+
+	/*
+	 * We're guaranteed that this region hasn't been taken.
+	 */
+	request_mem_region(sachip->phys + SA1111_INTC, 512, "irq");
+
+	ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1);
+	if (ret <= 0) {
+		dev_err(sachip->dev, "unable to allocate %u irqs: %d\n",
+			SA1111_IRQ_NR, ret);
+		if (ret == 0)
+			ret = -EINVAL;
+		return ret;
+	}
+
+	sachip->irq_base = ret;
+
+	/* disable all IRQs */
+	sa1111_writel(0, irqbase + SA1111_INTEN0);
+	sa1111_writel(0, irqbase + SA1111_INTEN1);
+	sa1111_writel(0, irqbase + SA1111_WAKEEN0);
+	sa1111_writel(0, irqbase + SA1111_WAKEEN1);
+
+	/*
+	 * detect on rising edge.  Note: Feb 2001 Errata for SA1111
+	 * specifies that S0ReadyInt and S1ReadyInt should be '1'.
+	 */
+	sa1111_writel(0, irqbase + SA1111_INTPOL0);
+	sa1111_writel(SA1111_IRQMASK_HI(IRQ_S0_READY_NINT) |
+		      SA1111_IRQMASK_HI(IRQ_S1_READY_NINT),
+		      irqbase + SA1111_INTPOL1);
+
+	/* clear all IRQs */
+	sa1111_writel(~0, irqbase + SA1111_INTSTATCLR0);
+	sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1);
+
+	for (i = IRQ_GPAIN0; i <= SSPROR; i++) {
+		irq = sachip->irq_base + i;
+		irq_set_chip_and_handler(irq, &sa1111_low_chip,
+					 handle_edge_irq);
+		irq_set_chip_data(irq, sachip);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) {
+		irq = sachip->irq_base + i;
+		irq_set_chip_and_handler(irq, &sa1111_high_chip,
+					 handle_edge_irq);
+		irq_set_chip_data(irq, sachip);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	/*
+	 * Register SA1111 interrupt
+	 */
+	irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
+	irq_set_handler_data(sachip->irq, sachip);
+	irq_set_chained_handler(sachip->irq, sa1111_irq_handler);
+
+	dev_info(sachip->dev, "Providing IRQ%u-%u\n",
+		sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
+
+	return 0;
+}
+
+/*
+ * Bring the SA1111 out of reset.  This requires a set procedure:
+ *  1. nRESET asserted (by hardware)
+ *  2. CLK turned on from SA1110
+ *  3. nRESET deasserted
+ *  4. VCO turned on, PLL_BYPASS turned off
+ *  5. Wait lock time, then assert RCLKEn
+ *  7. PCR set to allow clocking of individual functions
+ *
+ * Until we've done this, the only registers we can access are:
+ *   SBI_SKCR
+ *   SBI_SMCR
+ *   SBI_SKID
+ */
+static void sa1111_wake(struct sa1111 *sachip)
+{
+	unsigned long flags, r;
+
+	spin_lock_irqsave(&sachip->lock, flags);
+
+	clk_enable(sachip->clk);
+
+	/*
+	 * Turn VCO on, and disable PLL Bypass.
+	 */
+	r = sa1111_readl(sachip->base + SA1111_SKCR);
+	r &= ~SKCR_VCO_OFF;
+	sa1111_writel(r, sachip->base + SA1111_SKCR);
+	r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
+	sa1111_writel(r, sachip->base + SA1111_SKCR);
+
+	/*
+	 * Wait lock time.  SA1111 manual _doesn't_
+	 * specify a figure for this!  We choose 100us.
+	 */
+	udelay(100);
+
+	/*
+	 * Enable RCLK.  We also ensure that RDYEN is set.
+	 */
+	r |= SKCR_RCLKEN | SKCR_RDYEN;
+	sa1111_writel(r, sachip->base + SA1111_SKCR);
+
+	/*
+	 * Wait 14 RCLK cycles for the chip to finish coming out
+	 * of reset. (RCLK=24MHz).  This is 590ns.
+	 */
+	udelay(1);
+
+	/*
+	 * Ensure all clocks are initially off.
+	 */
+	sa1111_writel(0, sachip->base + SA1111_SKPCR);
+
+	spin_unlock_irqrestore(&sachip->lock, flags);
+}
+
+#ifdef CONFIG_ARCH_SA1100
+
+static u32 sa1111_dma_mask[] = {
+	~0,
+	~(1 << 20),
+	~(1 << 23),
+	~(1 << 24),
+	~(1 << 25),
+	~(1 << 20),
+	~(1 << 20),
+	0,
+};
+
+/*
+ * Configure the SA1111 shared memory controller.
+ */
+void
+sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
+		     unsigned int cas_latency)
+{
+	unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
+
+	if (cas_latency == 3)
+		smcr |= SMCR_CLAT;
+
+	sa1111_writel(smcr, sachip->base + SA1111_SMCR);
+
+	/*
+	 * Now clear the bits in the DMA mask to work around the SA1111
+	 * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion
+	 * Chip Specification Update, June 2000, Erratum #7).
+	 */
+	if (sachip->dev->dma_mask)
+		*sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2];
+
+	sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2];
+}
+#endif
+
+static void sa1111_dev_release(struct device *_dev)
+{
+	struct sa1111_dev *dev = SA1111_DEV(_dev);
+
+	kfree(dev);
+}
+
+static int
+sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
+		      struct sa1111_dev_info *info)
+{
+	struct sa1111_dev *dev;
+	unsigned i;
+	int ret;
+
+	dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
+	if (!dev) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	device_initialize(&dev->dev);
+	dev_set_name(&dev->dev, "%4.4lx", info->offset);
+	dev->devid	 = info->devid;
+	dev->dev.parent  = sachip->dev;
+	dev->dev.bus     = &sa1111_bus_type;
+	dev->dev.release = sa1111_dev_release;
+	dev->res.start   = sachip->phys + info->offset;
+	dev->res.end     = dev->res.start + 511;
+	dev->res.name    = dev_name(&dev->dev);
+	dev->res.flags   = IORESOURCE_MEM;
+	dev->mapbase     = sachip->base + info->offset;
+	dev->skpcr_mask  = info->skpcr_mask;
+
+	for (i = 0; i < ARRAY_SIZE(info->irq); i++)
+		dev->irq[i] = sachip->irq_base + info->irq[i];
+
+	/*
+	 * If the parent device has a DMA mask associated with it, and
+	 * this child supports DMA, propagate it down to the children.
+	 */
+	if (info->dma && sachip->dev->dma_mask) {
+		dev->dma_mask = *sachip->dev->dma_mask;
+		dev->dev.dma_mask = &dev->dma_mask;
+		dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
+	}
+
+	ret = request_resource(parent, &dev->res);
+	if (ret) {
+		dev_err(sachip->dev, "failed to allocate resource for %s\n",
+			dev->res.name);
+		goto err_resource;
+	}
+
+	ret = device_add(&dev->dev);
+	if (ret)
+		goto err_add;
+	return 0;
+
+ err_add:
+	release_resource(&dev->res);
+ err_resource:
+	put_device(&dev->dev);
+ err_alloc:
+	return ret;
+}
+
+/**
+ *	sa1111_probe - probe for a single SA1111 chip.
+ *	@phys_addr: physical address of device.
+ *
+ *	Probe for a SA1111 chip.  This must be called
+ *	before any other SA1111-specific code.
+ *
+ *	Returns:
+ *	%-ENODEV	device not found.
+ *	%-EBUSY		physical address already marked in-use.
+ *	%-EINVAL	no platform data passed
+ *	%0		successful.
+ */
+static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
+{
+	struct sa1111_platform_data *pd = me->platform_data;
+	struct sa1111 *sachip;
+	unsigned long id;
+	unsigned int has_devs;
+	int i, ret = -ENODEV;
+
+	if (!pd)
+		return -EINVAL;
+
+	sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL);
+	if (!sachip)
+		return -ENOMEM;
+
+	sachip->clk = clk_get(me, "SA1111_CLK");
+	if (IS_ERR(sachip->clk)) {
+		ret = PTR_ERR(sachip->clk);
+		goto err_free;
+	}
+
+	ret = clk_prepare(sachip->clk);
+	if (ret)
+		goto err_clkput;
+
+	spin_lock_init(&sachip->lock);
+
+	sachip->dev = me;
+	dev_set_drvdata(sachip->dev, sachip);
+
+	sachip->pdata = pd;
+	sachip->phys = mem->start;
+	sachip->irq = irq;
+
+	/*
+	 * Map the whole region.  This also maps the
+	 * registers for our children.
+	 */
+	sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
+	if (!sachip->base) {
+		ret = -ENOMEM;
+		goto err_clk_unprep;
+	}
+
+	/*
+	 * Probe for the chip.  Only touch the SBI registers.
+	 */
+	id = sa1111_readl(sachip->base + SA1111_SKID);
+	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
+		printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
+		ret = -ENODEV;
+		goto err_unmap;
+	}
+
+	pr_info("SA1111 Microprocessor Companion Chip: silicon revision %lx, metal revision %lx\n",
+		(id & SKID_SIREV_MASK) >> 4, id & SKID_MTREV_MASK);
+
+	/*
+	 * We found it.  Wake the chip up, and initialise.
+	 */
+	sa1111_wake(sachip);
+
+	/*
+	 * The interrupt controller must be initialised before any
+	 * other device to ensure that the interrupts are available.
+	 */
+	if (sachip->irq != NO_IRQ) {
+		ret = sa1111_setup_irq(sachip, pd->irq_base);
+		if (ret)
+			goto err_unmap;
+	}
+
+#ifdef CONFIG_ARCH_SA1100
+	{
+	unsigned int val;
+
+	/*
+	 * The SDRAM configuration of the SA1110 and the SA1111 must
+	 * match.  This is very important to ensure that SA1111 accesses
+	 * don't corrupt the SDRAM.  Note that this ungates the SA1111's
+	 * MBGNT signal, so we must have called sa1110_mb_disable()
+	 * beforehand.
+	 */
+	sa1111_configure_smc(sachip, 1,
+			     FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
+			     FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
+
+	/*
+	 * We only need to turn on DCLK whenever we want to use the
+	 * DMA.  It can otherwise be held firmly in the off position.
+	 * (currently, we always enable it.)
+	 */
+	val = sa1111_readl(sachip->base + SA1111_SKPCR);
+	sa1111_writel(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR);
+
+	/*
+	 * Enable the SA1110 memory bus request and grant signals.
+	 */
+	sa1110_mb_enable();
+	}
+#endif
+
+	g_sa1111 = sachip;
+
+	has_devs = ~0;
+	if (pd)
+		has_devs &= ~pd->disable_devs;
+
+	for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++)
+		if (sa1111_devices[i].devid & has_devs)
+			sa1111_init_one_child(sachip, mem, &sa1111_devices[i]);
+
+	return 0;
+
+ err_unmap:
+	iounmap(sachip->base);
+ err_clk_unprep:
+	clk_unprepare(sachip->clk);
+ err_clkput:
+	clk_put(sachip->clk);
+ err_free:
+	kfree(sachip);
+	return ret;
+}
+
+static int sa1111_remove_one(struct device *dev, void *data)
+{
+	struct sa1111_dev *sadev = SA1111_DEV(dev);
+	device_del(&sadev->dev);
+	release_resource(&sadev->res);
+	put_device(&sadev->dev);
+	return 0;
+}
+
+static void __sa1111_remove(struct sa1111 *sachip)
+{
+	void __iomem *irqbase = sachip->base + SA1111_INTC;
+
+	device_for_each_child(sachip->dev, NULL, sa1111_remove_one);
+
+	/* disable all IRQs */
+	sa1111_writel(0, irqbase + SA1111_INTEN0);
+	sa1111_writel(0, irqbase + SA1111_INTEN1);
+	sa1111_writel(0, irqbase + SA1111_WAKEEN0);
+	sa1111_writel(0, irqbase + SA1111_WAKEEN1);
+
+	clk_disable(sachip->clk);
+	clk_unprepare(sachip->clk);
+
+	if (sachip->irq != NO_IRQ) {
+		irq_set_chained_handler(sachip->irq, NULL);
+		irq_set_handler_data(sachip->irq, NULL);
+		irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
+
+		release_mem_region(sachip->phys + SA1111_INTC, 512);
+	}
+
+	iounmap(sachip->base);
+	clk_put(sachip->clk);
+	kfree(sachip);
+}
+
+struct sa1111_save_data {
+	unsigned int	skcr;
+	unsigned int	skpcr;
+	unsigned int	skcdr;
+	unsigned char	skaud;
+	unsigned char	skpwm0;
+	unsigned char	skpwm1;
+
+	/*
+	 * Interrupt controller
+	 */
+	unsigned int	intpol0;
+	unsigned int	intpol1;
+	unsigned int	inten0;
+	unsigned int	inten1;
+	unsigned int	wakepol0;
+	unsigned int	wakepol1;
+	unsigned int	wakeen0;
+	unsigned int	wakeen1;
+};
+
+#ifdef CONFIG_PM
+
+static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111_save_data *save;
+	unsigned long flags;
+	unsigned int val;
+	void __iomem *base;
+
+	save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
+	if (!save)
+		return -ENOMEM;
+	sachip->saved_state = save;
+
+	spin_lock_irqsave(&sachip->lock, flags);
+
+	/*
+	 * Save state.
+	 */
+	base = sachip->base;
+	save->skcr     = sa1111_readl(base + SA1111_SKCR);
+	save->skpcr    = sa1111_readl(base + SA1111_SKPCR);
+	save->skcdr    = sa1111_readl(base + SA1111_SKCDR);
+	save->skaud    = sa1111_readl(base + SA1111_SKAUD);
+	save->skpwm0   = sa1111_readl(base + SA1111_SKPWM0);
+	save->skpwm1   = sa1111_readl(base + SA1111_SKPWM1);
+
+	sa1111_writel(0, sachip->base + SA1111_SKPWM0);
+	sa1111_writel(0, sachip->base + SA1111_SKPWM1);
+
+	base = sachip->base + SA1111_INTC;
+	save->intpol0  = sa1111_readl(base + SA1111_INTPOL0);
+	save->intpol1  = sa1111_readl(base + SA1111_INTPOL1);
+	save->inten0   = sa1111_readl(base + SA1111_INTEN0);
+	save->inten1   = sa1111_readl(base + SA1111_INTEN1);
+	save->wakepol0 = sa1111_readl(base + SA1111_WAKEPOL0);
+	save->wakepol1 = sa1111_readl(base + SA1111_WAKEPOL1);
+	save->wakeen0  = sa1111_readl(base + SA1111_WAKEEN0);
+	save->wakeen1  = sa1111_readl(base + SA1111_WAKEEN1);
+
+	/*
+	 * Disable.
+	 */
+	val = sa1111_readl(sachip->base + SA1111_SKCR);
+	sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
+
+	clk_disable(sachip->clk);
+
+	spin_unlock_irqrestore(&sachip->lock, flags);
+
+#ifdef CONFIG_ARCH_SA1100
+	sa1110_mb_disable();
+#endif
+
+	return 0;
+}
+
+/*
+ *	sa1111_resume - Restore the SA1111 device state.
+ *	@dev: device to restore
+ *
+ *	Restore the general state of the SA1111; clock control and
+ *	interrupt controller.  Other parts of the SA1111 must be
+ *	restored by their respective drivers, and must be called
+ *	via LDM after this function.
+ */
+static int sa1111_resume(struct platform_device *dev)
+{
+	struct sa1111 *sachip = platform_get_drvdata(dev);
+	struct sa1111_save_data *save;
+	unsigned long flags, id;
+	void __iomem *base;
+
+	save = sachip->saved_state;
+	if (!save)
+		return 0;
+
+	/*
+	 * Ensure that the SA1111 is still here.
+	 * FIXME: shouldn't do this here.
+	 */
+	id = sa1111_readl(sachip->base + SA1111_SKID);
+	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
+		__sa1111_remove(sachip);
+		platform_set_drvdata(dev, NULL);
+		kfree(save);
+		return 0;
+	}
+
+	/*
+	 * First of all, wake up the chip.
+	 */
+	sa1111_wake(sachip);
+
+#ifdef CONFIG_ARCH_SA1100
+	/* Enable the memory bus request/grant signals */
+	sa1110_mb_enable();
+#endif
+
+	/*
+	 * Only lock for write ops. Also, sa1111_wake must be called with
+	 * released spinlock!
+	 */
+	spin_lock_irqsave(&sachip->lock, flags);
+
+	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
+	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
+
+	base = sachip->base;
+	sa1111_writel(save->skcr,     base + SA1111_SKCR);
+	sa1111_writel(save->skpcr,    base + SA1111_SKPCR);
+	sa1111_writel(save->skcdr,    base + SA1111_SKCDR);
+	sa1111_writel(save->skaud,    base + SA1111_SKAUD);
+	sa1111_writel(save->skpwm0,   base + SA1111_SKPWM0);
+	sa1111_writel(save->skpwm1,   base + SA1111_SKPWM1);
+
+	base = sachip->base + SA1111_INTC;
+	sa1111_writel(save->intpol0,  base + SA1111_INTPOL0);
+	sa1111_writel(save->intpol1,  base + SA1111_INTPOL1);
+	sa1111_writel(save->inten0,   base + SA1111_INTEN0);
+	sa1111_writel(save->inten1,   base + SA1111_INTEN1);
+	sa1111_writel(save->wakepol0, base + SA1111_WAKEPOL0);
+	sa1111_writel(save->wakepol1, base + SA1111_WAKEPOL1);
+	sa1111_writel(save->wakeen0,  base + SA1111_WAKEEN0);
+	sa1111_writel(save->wakeen1,  base + SA1111_WAKEEN1);
+
+	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	sachip->saved_state = NULL;
+	kfree(save);
+
+	return 0;
+}
+
+#else
+#define sa1111_suspend NULL
+#define sa1111_resume  NULL
+#endif
+
+static int sa1111_probe(struct platform_device *pdev)
+{
+	struct resource *mem;
+	int irq;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem)
+		return -EINVAL;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	return __sa1111_probe(&pdev->dev, mem, irq);
+}
+
+static int sa1111_remove(struct platform_device *pdev)
+{
+	struct sa1111 *sachip = platform_get_drvdata(pdev);
+
+	if (sachip) {
+#ifdef CONFIG_PM
+		kfree(sachip->saved_state);
+		sachip->saved_state = NULL;
+#endif
+		__sa1111_remove(sachip);
+		platform_set_drvdata(pdev, NULL);
+	}
+
+	return 0;
+}
+
+/*
+ *	Not sure if this should be on the system bus or not yet.
+ *	We really want some way to register a system device at
+ *	the per-machine level, and then have this driver pick
+ *	up the registered devices.
+ *
+ *	We also need to handle the SDRAM configuration for
+ *	PXA250/SA1110 machine classes.
+ */
+static struct platform_driver sa1111_device_driver = {
+	.probe		= sa1111_probe,
+	.remove		= sa1111_remove,
+	.suspend	= sa1111_suspend,
+	.resume		= sa1111_resume,
+	.driver		= {
+		.name	= "sa1111",
+	},
+};
+
+/*
+ *	Get the parent device driver (us) structure
+ *	from a child function device
+ */
+static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev)
+{
+	return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent);
+}
+
+/*
+ * The bits in the opdiv field are non-linear.
+ */
+static unsigned char opdiv_table[] = { 1, 4, 2, 8 };
+
+static unsigned int __sa1111_pll_clock(struct sa1111 *sachip)
+{
+	unsigned int skcdr, fbdiv, ipdiv, opdiv;
+
+	skcdr = sa1111_readl(sachip->base + SA1111_SKCDR);
+
+	fbdiv = (skcdr & 0x007f) + 2;
+	ipdiv = ((skcdr & 0x0f80) >> 7) + 2;
+	opdiv = opdiv_table[(skcdr & 0x3000) >> 12];
+
+	return 3686400 * fbdiv / (ipdiv * opdiv);
+}
+
+/**
+ *	sa1111_pll_clock - return the current PLL clock frequency.
+ *	@sadev: SA1111 function block
+ *
+ *	BUG: we should look at SKCR.  We also blindly believe that
+ *	the chip is being fed with the 3.6864MHz clock.
+ *
+ *	Returns the PLL clock in Hz.
+ */
+unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+
+	return __sa1111_pll_clock(sachip);
+}
+EXPORT_SYMBOL(sa1111_pll_clock);
+
+/**
+ *	sa1111_select_audio_mode - select I2S or AC link mode
+ *	@sadev: SA1111 function block
+ *	@mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S
+ *
+ *	Frob the SKCR to select AC Link mode or I2S mode for
+ *	the audio block.
+ */
+void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&sachip->lock, flags);
+
+	val = sa1111_readl(sachip->base + SA1111_SKCR);
+	if (mode == SA1111_AUDIO_I2S) {
+		val &= ~SKCR_SELAC;
+	} else {
+		val |= SKCR_SELAC;
+	}
+	sa1111_writel(val, sachip->base + SA1111_SKCR);
+
+	spin_unlock_irqrestore(&sachip->lock, flags);
+}
+EXPORT_SYMBOL(sa1111_select_audio_mode);
+
+/**
+ *	sa1111_set_audio_rate - set the audio sample rate
+ *	@sadev: SA1111 SAC function block
+ *	@rate: sample rate to select
+ */
+int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+	unsigned int div;
+
+	if (sadev->devid != SA1111_DEVID_SAC)
+		return -EINVAL;
+
+	div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate;
+	if (div == 0)
+		div = 1;
+	if (div > 128)
+		div = 128;
+
+	sa1111_writel(div - 1, sachip->base + SA1111_SKAUD);
+
+	return 0;
+}
+EXPORT_SYMBOL(sa1111_set_audio_rate);
+
+/**
+ *	sa1111_get_audio_rate - get the audio sample rate
+ *	@sadev: SA1111 SAC function block device
+ */
+int sa1111_get_audio_rate(struct sa1111_dev *sadev)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+	unsigned long div;
+
+	if (sadev->devid != SA1111_DEVID_SAC)
+		return -EINVAL;
+
+	div = sa1111_readl(sachip->base + SA1111_SKAUD) + 1;
+
+	return __sa1111_pll_clock(sachip) / (256 * div);
+}
+EXPORT_SYMBOL(sa1111_get_audio_rate);
+
+void sa1111_set_io_dir(struct sa1111_dev *sadev,
+		       unsigned int bits, unsigned int dir,
+		       unsigned int sleep_dir)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+	unsigned long flags;
+	unsigned int val;
+	void __iomem *gpio = sachip->base + SA1111_GPIO;
+
+#define MODIFY_BITS(port, mask, dir)		\
+	if (mask) {				\
+		val = sa1111_readl(port);	\
+		val &= ~(mask);			\
+		val |= (dir) & (mask);		\
+		sa1111_writel(val, port);	\
+	}
+
+	spin_lock_irqsave(&sachip->lock, flags);
+	MODIFY_BITS(gpio + SA1111_GPIO_PADDR, bits & 15, dir);
+	MODIFY_BITS(gpio + SA1111_GPIO_PBDDR, (bits >> 8) & 255, dir >> 8);
+	MODIFY_BITS(gpio + SA1111_GPIO_PCDDR, (bits >> 16) & 255, dir >> 16);
+
+	MODIFY_BITS(gpio + SA1111_GPIO_PASDR, bits & 15, sleep_dir);
+	MODIFY_BITS(gpio + SA1111_GPIO_PBSDR, (bits >> 8) & 255, sleep_dir >> 8);
+	MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16);
+	spin_unlock_irqrestore(&sachip->lock, flags);
+}
+EXPORT_SYMBOL(sa1111_set_io_dir);
+
+void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+	unsigned long flags;
+	unsigned int val;
+	void __iomem *gpio = sachip->base + SA1111_GPIO;
+
+	spin_lock_irqsave(&sachip->lock, flags);
+	MODIFY_BITS(gpio + SA1111_GPIO_PADWR, bits & 15, v);
+	MODIFY_BITS(gpio + SA1111_GPIO_PBDWR, (bits >> 8) & 255, v >> 8);
+	MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16);
+	spin_unlock_irqrestore(&sachip->lock, flags);
+}
+EXPORT_SYMBOL(sa1111_set_io);
+
+void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+	unsigned long flags;
+	unsigned int val;
+	void __iomem *gpio = sachip->base + SA1111_GPIO;
+
+	spin_lock_irqsave(&sachip->lock, flags);
+	MODIFY_BITS(gpio + SA1111_GPIO_PASSR, bits & 15, v);
+	MODIFY_BITS(gpio + SA1111_GPIO_PBSSR, (bits >> 8) & 255, v >> 8);
+	MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16);
+	spin_unlock_irqrestore(&sachip->lock, flags);
+}
+EXPORT_SYMBOL(sa1111_set_sleep_io);
+
+/*
+ * Individual device operations.
+ */
+
+/**
+ *	sa1111_enable_device - enable an on-chip SA1111 function block
+ *	@sadev: SA1111 function block device to enable
+ */
+int sa1111_enable_device(struct sa1111_dev *sadev)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+	unsigned long flags;
+	unsigned int val;
+	int ret = 0;
+
+	if (sachip->pdata && sachip->pdata->enable)
+		ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid);
+
+	if (ret == 0) {
+		spin_lock_irqsave(&sachip->lock, flags);
+		val = sa1111_readl(sachip->base + SA1111_SKPCR);
+		sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
+		spin_unlock_irqrestore(&sachip->lock, flags);
+	}
+	return ret;
+}
+EXPORT_SYMBOL(sa1111_enable_device);
+
+/**
+ *	sa1111_disable_device - disable an on-chip SA1111 function block
+ *	@sadev: SA1111 function block device to disable
+ */
+void sa1111_disable_device(struct sa1111_dev *sadev)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&sachip->lock, flags);
+	val = sa1111_readl(sachip->base + SA1111_SKPCR);
+	sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
+	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	if (sachip->pdata && sachip->pdata->disable)
+		sachip->pdata->disable(sachip->pdata->data, sadev->devid);
+}
+EXPORT_SYMBOL(sa1111_disable_device);
+
+/*
+ *	SA1111 "Register Access Bus."
+ *
+ *	We model this as a regular bus type, and hang devices directly
+ *	off this.
+ */
+static int sa1111_match(struct device *_dev, struct device_driver *_drv)
+{
+	struct sa1111_dev *dev = SA1111_DEV(_dev);
+	struct sa1111_driver *drv = SA1111_DRV(_drv);
+
+	return dev->devid & drv->devid;
+}
+
+static int sa1111_bus_suspend(struct device *dev, pm_message_t state)
+{
+	struct sa1111_dev *sadev = SA1111_DEV(dev);
+	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
+	int ret = 0;
+
+	if (drv && drv->suspend)
+		ret = drv->suspend(sadev, state);
+	return ret;
+}
+
+static int sa1111_bus_resume(struct device *dev)
+{
+	struct sa1111_dev *sadev = SA1111_DEV(dev);
+	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
+	int ret = 0;
+
+	if (drv && drv->resume)
+		ret = drv->resume(sadev);
+	return ret;
+}
+
+static void sa1111_bus_shutdown(struct device *dev)
+{
+	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
+
+	if (drv && drv->shutdown)
+		drv->shutdown(SA1111_DEV(dev));
+}
+
+static int sa1111_bus_probe(struct device *dev)
+{
+	struct sa1111_dev *sadev = SA1111_DEV(dev);
+	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
+	int ret = -ENODEV;
+
+	if (drv->probe)
+		ret = drv->probe(sadev);
+	return ret;
+}
+
+static int sa1111_bus_remove(struct device *dev)
+{
+	struct sa1111_dev *sadev = SA1111_DEV(dev);
+	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
+	int ret = 0;
+
+	if (drv->remove)
+		ret = drv->remove(sadev);
+	return ret;
+}
+
+struct bus_type sa1111_bus_type = {
+	.name		= "sa1111-rab",
+	.match		= sa1111_match,
+	.probe		= sa1111_bus_probe,
+	.remove		= sa1111_bus_remove,
+	.suspend	= sa1111_bus_suspend,
+	.resume		= sa1111_bus_resume,
+	.shutdown	= sa1111_bus_shutdown,
+};
+EXPORT_SYMBOL(sa1111_bus_type);
+
+int sa1111_driver_register(struct sa1111_driver *driver)
+{
+	driver->drv.bus = &sa1111_bus_type;
+	return driver_register(&driver->drv);
+}
+EXPORT_SYMBOL(sa1111_driver_register);
+
+void sa1111_driver_unregister(struct sa1111_driver *driver)
+{
+	driver_unregister(&driver->drv);
+}
+EXPORT_SYMBOL(sa1111_driver_unregister);
+
+#ifdef CONFIG_DMABOUNCE
+/*
+ * According to the "Intel StrongARM SA-1111 Microprocessor Companion
+ * Chip Specification Update" (June 2000), erratum #7, there is a
+ * significant bug in the SA1111 SDRAM shared memory controller.  If
+ * an access to a region of memory above 1MB relative to the bank base,
+ * it is important that address bit 10 _NOT_ be asserted. Depending
+ * on the configuration of the RAM, bit 10 may correspond to one
+ * of several different (processor-relative) address bits.
+ *
+ * This routine only identifies whether or not a given DMA address
+ * is susceptible to the bug.
+ *
+ * This should only get called for sa1111_device types due to the
+ * way we configure our device dma_masks.
+ */
+static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
+{
+	/*
+	 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
+	 * User's Guide" mentions that jumpers R51 and R52 control the
+	 * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
+	 * SDRAM bank 1 on Neponset). The default configuration selects
+	 * Assabet, so any address in bank 1 is necessarily invalid.
+	 */
+	return (machine_is_assabet() || machine_is_pfs168()) &&
+		(addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
+}
+
+static int sa1111_notifier_call(struct notifier_block *n, unsigned long action,
+	void *data)
+{
+	struct sa1111_dev *dev = SA1111_DEV(data);
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) {
+			int ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
+					sa1111_needs_bounce);
+			if (ret)
+				dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret);
+		}
+		break;
+
+	case BUS_NOTIFY_DEL_DEVICE:
+		if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL)
+			dmabounce_unregister_dev(&dev->dev);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block sa1111_bus_notifier = {
+	.notifier_call = sa1111_notifier_call,
+};
+#endif
+
+static int __init sa1111_init(void)
+{
+	int ret = bus_register(&sa1111_bus_type);
+#ifdef CONFIG_DMABOUNCE
+	if (ret == 0)
+		bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
+#endif
+	if (ret == 0)
+		platform_driver_register(&sa1111_device_driver);
+	return ret;
+}
+
+static void __exit sa1111_exit(void)
+{
+	platform_driver_unregister(&sa1111_device_driver);
+#ifdef CONFIG_DMABOUNCE
+	bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
+#endif
+	bus_unregister(&sa1111_bus_type);
+}
+
+subsys_initcall(sa1111_init);
+module_exit(sa1111_exit);
+
+MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
+MODULE_LICENSE("GPL");