Initial import

1 files changed, 148 insertions, 0 deletions

diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h
new file mode 100644
index 000000000..f4882553f
--- /dev/null
+++ b/arch/arm/include/asm/floppy.h
@@ -0,0 +1,148 @@
+/*
+ *  arch/arm/include/asm/floppy.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
+ */
+#ifndef __ASM_ARM_FLOPPY_H
+#define __ASM_ARM_FLOPPY_H
+#if 0
+#include <mach/floppy.h>
+#endif
+
+#define fd_outb(val,port)			\
+	do {					\
+		if ((port) == FD_DOR)		\
+			fd_setdor((val));	\
+		else				\
+			outb((val),(port));	\
+	} while(0)
+
+#define fd_inb(port)		inb((port))
+#define fd_request_irq()	request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
+					    0,"floppy",NULL)
+#define fd_free_irq()		free_irq(IRQ_FLOPPYDISK,NULL)
+#define fd_disable_irq()	disable_irq(IRQ_FLOPPYDISK)
+#define fd_enable_irq()		enable_irq(IRQ_FLOPPYDISK)
+
+static inline int fd_dma_setup(void *data, unsigned int length,
+			       unsigned int mode, unsigned long addr)
+{
+	set_dma_mode(DMA_FLOPPY, mode);
+	__set_dma_addr(DMA_FLOPPY, data);
+	set_dma_count(DMA_FLOPPY, length);
+	virtual_dma_port = addr;
+	enable_dma(DMA_FLOPPY);
+	return 0;
+}
+#define fd_dma_setup		fd_dma_setup
+
+#define fd_request_dma()	request_dma(DMA_FLOPPY,"floppy")
+#define fd_free_dma()		free_dma(DMA_FLOPPY)
+#define fd_disable_dma()	disable_dma(DMA_FLOPPY)
+
+/* need to clean up dma.h */
+#define DMA_FLOPPYDISK		DMA_FLOPPY
+
+/* Floppy_selects is the list of DOR's to select drive fd
+ *
+ * On initialisation, the floppy list is scanned, and the drives allocated
+ * in the order that they are found.  This is done by seeking the drive
+ * to a non-zero track, and then restoring it to track 0.  If an error occurs,
+ * then there is no floppy drive present.       [to be put back in again]
+ */
+static unsigned char floppy_selects[2][4] =
+{
+	{ 0x10, 0x21, 0x23, 0x33 },
+	{ 0x10, 0x21, 0x23, 0x33 }
+};
+
+#define fd_setdor(dor)								\
+do {										\
+	int new_dor = (dor);							\
+	if (new_dor & 0xf0)							\
+		new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3];	\
+	else									\
+		new_dor &= 0x0c;						\
+	outb(new_dor, FD_DOR);							\
+} while (0)
+
+/*
+ * Someday, we'll automatically detect which drives are present...
+ */
+static inline void fd_scandrives (void)
+{
+#if 0
+	int floppy, drive_count;
+
+	fd_disable_irq();
+	raw_cmd = &default_raw_cmd;
+	raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
+	raw_cmd->track = 0;
+	raw_cmd->rate = ?;
+	drive_count = 0;
+	for (floppy = 0; floppy < 4; floppy ++) {
+		current_drive = drive_count;
+		/*
+		 * Turn on floppy motor
+		 */
+		if (start_motor(redo_fd_request))
+			continue;
+		/*
+		 * Set up FDC
+		 */
+		fdc_specify();
+		/*
+		 * Tell FDC to recalibrate
+		 */
+		output_byte(FD_RECALIBRATE);
+		LAST_OUT(UNIT(floppy));
+		/* wait for command to complete */
+		if (!successful) {
+			int i;
+			for (i = drive_count; i < 3; i--)
+				floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
+			floppy_selects[fdc][3] = 0;
+			floppy -= 1;
+		} else
+			drive_count++;
+	}
+#else
+	floppy_selects[0][0] = 0x10;
+	floppy_selects[0][1] = 0x21;
+	floppy_selects[0][2] = 0x23;
+	floppy_selects[0][3] = 0x33;
+#endif
+}
+
+#define FDC1 (0x3f0)
+
+#define FLOPPY0_TYPE 4
+#define FLOPPY1_TYPE 4
+
+#define N_FDC 1
+#define N_DRIVE 4
+
+#define CROSS_64KB(a,s) (0)
+
+/*
+ * This allows people to reverse the order of
+ * fd0 and fd1, in case their hardware is
+ * strangely connected (as some RiscPCs
+ * and A5000s seem to be).
+ */
+static void driveswap(int *ints, int dummy, int dummy2)
+{
+	floppy_selects[0][0] ^= floppy_selects[0][1];
+	floppy_selects[0][1] ^= floppy_selects[0][0];
+	floppy_selects[0][0] ^= floppy_selects[0][1];
+}
+
+#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
+	
+#endif