Initial import

1 files changed, 260 insertions, 0 deletions

diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
new file mode 100644
index 000000000..aebfbf79a
--- /dev/null
+++ b/arch/arm/kernel/head-nommu.S
@@ -0,0 +1,260 @@
+/*
+ *  linux/arch/arm/kernel/head-nommu.S
+ *
+ *  Copyright (C) 1994-2002 Russell King
+ *  Copyright (C) 2003-2006 Hyok S. Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Common kernel startup code (non-paged MM)
+ *
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/assembler.h>
+#include <asm/ptrace.h>
+#include <asm/asm-offsets.h>
+#include <asm/memory.h>
+#include <asm/cp15.h>
+#include <asm/thread_info.h>
+#include <asm/v7m.h>
+#include <asm/mpu.h>
+#include <asm/page.h>
+
+/*
+ * Kernel startup entry point.
+ * ---------------------------
+ *
+ * This is normally called from the decompressor code.  The requirements
+ * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
+ * r1 = machine nr.
+ *
+ * See linux/arch/arm/tools/mach-types for the complete list of machine
+ * numbers for r1.
+ *
+ */
+
+	__HEAD
+
+#ifdef CONFIG_CPU_THUMBONLY
+	.thumb
+ENTRY(stext)
+#else
+	.arm
+ENTRY(stext)
+
+ THUMB(	adr	r9, BSYM(1f)	)	@ Kernel is always entered in ARM.
+ THUMB(	bx	r9		)	@ If this is a Thumb-2 kernel,
+ THUMB(	.thumb			)	@ switch to Thumb now.
+ THUMB(1:			)
+#endif
+
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
+						@ and irqs disabled
+#if defined(CONFIG_CPU_CP15)
+	mrc	p15, 0, r9, c0, c0		@ get processor id
+#elif defined(CONFIG_CPU_V7M)
+	ldr	r9, =BASEADDR_V7M_SCB
+	ldr	r9, [r9, V7M_SCB_CPUID]
+#else
+	ldr	r9, =CONFIG_PROCESSOR_ID
+#endif
+	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
+	movs	r10, r5				@ invalid processor (r5=0)?
+	beq	__error_p				@ yes, error 'p'
+
+#ifdef CONFIG_ARM_MPU
+	/* Calculate the size of a region covering just the kernel */
+	ldr	r5, =PLAT_PHYS_OFFSET		@ Region start: PHYS_OFFSET
+	ldr     r6, =(_end)			@ Cover whole kernel
+	sub	r6, r6, r5			@ Minimum size of region to map
+	clz	r6, r6				@ Region size must be 2^N...
+	rsb	r6, r6, #31			@ ...so round up region size
+	lsl	r6, r6, #MPU_RSR_SZ		@ Put size in right field
+	orr	r6, r6, #(1 << MPU_RSR_EN)	@ Set region enabled bit
+	bl	__setup_mpu
+#endif
+	ldr	r13, =__mmap_switched		@ address to jump to after
+						@ initialising sctlr
+	adr	lr, BSYM(1f)			@ return (PIC) address
+	ldr	r12, [r10, #PROCINFO_INITFUNC]
+	add	r12, r12, r10
+	ret	r12
+ 1:	b	__after_proc_init
+ENDPROC(stext)
+
+#ifdef CONFIG_SMP
+	.text
+ENTRY(secondary_startup)
+	/*
+	 * Common entry point for secondary CPUs.
+	 *
+	 * Ensure that we're in SVC mode, and IRQs are disabled.  Lookup
+	 * the processor type - there is no need to check the machine type
+	 * as it has already been validated by the primary processor.
+	 */
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
+#ifndef CONFIG_CPU_CP15
+	ldr	r9, =CONFIG_PROCESSOR_ID
+#else
+	mrc	p15, 0, r9, c0, c0		@ get processor id
+#endif
+	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
+	movs	r10, r5				@ invalid processor?
+	beq	__error_p			@ yes, error 'p'
+
+	adr	r4, __secondary_data
+	ldmia	r4, {r7, r12}
+
+#ifdef CONFIG_ARM_MPU
+	/* Use MPU region info supplied by __cpu_up */
+	ldr	r6, [r7]			@ get secondary_data.mpu_szr
+	bl      __setup_mpu			@ Initialize the MPU
+#endif
+
+	adr	lr, BSYM(__after_proc_init)	@ return address
+	mov	r13, r12			@ __secondary_switched address
+	ldr	r12, [r10, #PROCINFO_INITFUNC]
+	add	r12, r12, r10
+	ret	r12
+ENDPROC(secondary_startup)
+
+ENTRY(__secondary_switched)
+	ldr	sp, [r7, #8]			@ set up the stack pointer
+	mov	fp, #0
+	b	secondary_start_kernel
+ENDPROC(__secondary_switched)
+
+	.type	__secondary_data, %object
+__secondary_data:
+	.long	secondary_data
+	.long	__secondary_switched
+#endif /* CONFIG_SMP */
+
+/*
+ * Set the Control Register and Read the process ID.
+ */
+__after_proc_init:
+#ifdef CONFIG_CPU_CP15
+	/*
+	 * CP15 system control register value returned in r0 from
+	 * the CPU init function.
+	 */
+#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
+	orr	r0, r0, #CR_A
+#else
+	bic	r0, r0, #CR_A
+#endif
+#ifdef CONFIG_CPU_DCACHE_DISABLE
+	bic	r0, r0, #CR_C
+#endif
+#ifdef CONFIG_CPU_BPREDICT_DISABLE
+	bic	r0, r0, #CR_Z
+#endif
+#ifdef CONFIG_CPU_ICACHE_DISABLE
+	bic	r0, r0, #CR_I
+#endif
+#ifdef CONFIG_CPU_HIGH_VECTOR
+	orr	r0, r0, #CR_V
+#else
+	bic	r0, r0, #CR_V
+#endif
+	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
+#endif /* CONFIG_CPU_CP15 */
+	ret	r13
+ENDPROC(__after_proc_init)
+	.ltorg
+
+#ifdef CONFIG_ARM_MPU
+
+
+/* Set which MPU region should be programmed */
+.macro set_region_nr tmp, rgnr
+	mov	\tmp, \rgnr			@ Use static region numbers
+	mcr	p15, 0, \tmp, c6, c2, 0		@ Write RGNR
+.endm
+
+/* Setup a single MPU region, either D or I side (D-side for unified) */
+.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE
+	mcr	p15, 0, \bar, c6, c1, (0 + \side)	@ I/DRBAR
+	mcr	p15, 0, \acr, c6, c1, (4 + \side)	@ I/DRACR
+	mcr	p15, 0, \sr, c6, c1, (2 + \side)		@ I/DRSR
+.endm
+
+/*
+ * Setup the MPU and initial MPU Regions. We create the following regions:
+ * Region 0: Use this for probing the MPU details, so leave disabled.
+ * Region 1: Background region - covers the whole of RAM as strongly ordered
+ * Region 2: Normal, Shared, cacheable for RAM. From PHYS_OFFSET, size from r6
+ * Region 3: Normal, shared, inaccessible from PL0 to protect the vectors page
+ *
+ * r6: Value to be written to DRSR (and IRSR if required) for MPU_RAM_REGION
+*/
+
+ENTRY(__setup_mpu)
+
+	/* Probe for v7 PMSA compliance */
+	mrc	p15, 0, r0, c0, c1, 4		@ Read ID_MMFR0
+	and	r0, r0, #(MMFR0_PMSA)		@ PMSA field
+	teq	r0, #(MMFR0_PMSAv7)		@ PMSA v7
+	bne	__error_p			@ Fail: ARM_MPU on NOT v7 PMSA
+
+	/* Determine whether the D/I-side memory map is unified. We set the
+	 * flags here and continue to use them for the rest of this function */
+	mrc	p15, 0, r0, c0, c0, 4		@ MPUIR
+	ands	r5, r0, #MPUIR_DREGION_SZMASK	@ 0 size d region => No MPU
+	beq	__error_p			@ Fail: ARM_MPU and no MPU
+	tst	r0, #MPUIR_nU			@ MPUIR_nU = 0 for unified
+
+	/* Setup second region first to free up r6 */
+	set_region_nr r0, #MPU_RAM_REGION
+	isb
+	/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
+	ldr	r0, =PLAT_PHYS_OFFSET		@ RAM starts at PHYS_OFFSET
+	ldr	r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL)
+
+	setup_region r0, r5, r6, MPU_DATA_SIDE	@ PHYS_OFFSET, shared, enabled
+	beq	1f				@ Memory-map not unified
+	setup_region r0, r5, r6, MPU_INSTR_SIDE @ PHYS_OFFSET, shared, enabled
+1:	isb
+
+	/* First/background region */
+	set_region_nr r0, #MPU_BG_REGION
+	isb
+	/* Execute Never,  strongly ordered, inaccessible to PL0, rw PL1  */
+	mov	r0, #0				@ BG region starts at 0x0
+	ldr	r5,=(MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA)
+	mov	r6, #MPU_RSR_ALL_MEM		@ 4GB region, enabled
+
+	setup_region r0, r5, r6, MPU_DATA_SIDE	@ 0x0, BG region, enabled
+	beq	2f				@ Memory-map not unified
+	setup_region r0, r5, r6, MPU_INSTR_SIDE @ 0x0, BG region, enabled
+2:	isb
+
+	/* Vectors region */
+	set_region_nr r0, #MPU_VECTORS_REGION
+	isb
+	/* Shared, inaccessible to PL0, rw PL1 */
+	mov	r0, #CONFIG_VECTORS_BASE	@ Cover from VECTORS_BASE
+	ldr	r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL)
+	/* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */
+	mov	r6, #(((PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
+
+	setup_region r0, r5, r6, MPU_DATA_SIDE	@ VECTORS_BASE, PL0 NA, enabled
+	beq	3f				@ Memory-map not unified
+	setup_region r0, r5, r6, MPU_INSTR_SIDE	@ VECTORS_BASE, PL0 NA, enabled
+3:	isb
+
+	/* Enable the MPU */
+	mrc	p15, 0, r0, c1, c0, 0		@ Read SCTLR
+	bic     r0, r0, #CR_BR			@ Disable the 'default mem-map'
+	orr	r0, r0, #CR_M			@ Set SCTRL.M (MPU on)
+	mcr	p15, 0, r0, c1, c0, 0		@ Enable MPU
+	isb
+	ret	lr
+ENDPROC(__setup_mpu)
+#endif
+#include "head-common.S"