Linux-libre 4.6.2-gnu

1 files changed, 0 insertions, 1284 deletions

diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
deleted file mode 100644
index 661c8f4b2..000000000
--- a/arch/arm/mach-lpc32xx/clock.c
+++ /dev/null
@@ -1,1284 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/clock.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * LPC32xx clock management driver overview
- *
- * The LPC32XX contains a number of high level system clocks that can be
- * generated from different sources. These system clocks are used to
- * generate the CPU and bus rates and the individual peripheral clocks in
- * the system. When Linux is started by the boot loader, the system
- * clocks are already running. Stopping a system clock during normal
- * Linux operation should never be attempted, as peripherals that require
- * those clocks will quit working (ie, DRAM).
- *
- * The LPC32xx high level clock tree looks as follows. Clocks marked with
- * an asterisk are always on and cannot be disabled. Clocks marked with
- * an ampersand can only be disabled in CPU suspend mode. Clocks marked
- * with a caret are always on if it is the selected clock for the SYSCLK
- * source. The clock that isn't used for SYSCLK can be enabled and
- * disabled normally.
- *                               32KHz oscillator*
- *                               /      |      \
- *                             RTC*   PLL397^ TOUCH
- *                                     /
- *               Main oscillator^     /
- *                   |        \      /
- *                   |         SYSCLK&
- *                   |            \
- *                   |             \
- *                USB_PLL       HCLK_PLL&
- *                   |           |    |
- *            USB host/device  PCLK&  |
- *                               |    |
- *                             Peripherals
- *
- * The CPU and chip bus rates are derived from the HCLK PLL, which can
- * generate various clock rates up to 266MHz and beyond. The internal bus
- * rates (PCLK and HCLK) are generated from dividers based on the HCLK
- * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate,
- * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high
- * level clocks are based on either HCLK or PCLK, but have their own
- * dividers as part of the IP itself. Because of this, the system clock
- * rates should not be changed.
- *
- * The HCLK PLL is clocked from SYSCLK, which can be derived from the
- * main oscillator or PLL397. PLL397 generates a rate that is 397 times
- * the 32KHz oscillator rate. The main oscillator runs at the selected
- * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate
- * is normally 13MHz, but depends on the selection of external crystals
- * or oscillators. If USB operation is required, the main oscillator must
- * be used in the system.
- *
- * Switching SYSCLK between sources during normal Linux operation is not
- * supported. SYSCLK is preset in the bootloader. Because of the
- * complexities of clock management during clock frequency changes,
- * there are some limitations to the clock driver explained below:
- * - The PLL397 and main oscillator can be enabled and disabled by the
- *   clk_enable() and clk_disable() functions unless SYSCLK is based
- *   on that clock. This allows the other oscillator that isn't driving
- *   the HCLK PLL to be used as another system clock that can be routed
- *   to an external pin.
- * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with
- *   this driver.
- * - HCLK and PCLK rates cannot be changed as part of this driver.
- * - Most peripherals have their own dividers are part of the peripheral
- *   block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates
- *   will also impact the individual peripheral rates.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "clock.h"
-#include "common.h"
-
-static DEFINE_SPINLOCK(global_clkregs_lock);
-
-static int usb_pll_enable, usb_pll_valid;
-
-static struct clk clk_armpll;
-static struct clk clk_usbpll;
-
-/*
- * Post divider values for PLLs based on selected register value
- */
-static const u32 pll_postdivs[4] = {1, 2, 4, 8};
-
-static unsigned long local_return_parent_rate(struct clk *clk)
-{
-	/*
-	 * If a clock has a rate of 0, then it inherits it's parent
-	 * clock rate
-	 */
-	while (clk->rate == 0)
-		clk = clk->parent;
-
-	return clk->rate;
-}
-
-/* 32KHz clock has a fixed rate and is not stoppable */
-static struct clk osc_32KHz = {
-	.rate		= LPC32XX_CLOCK_OSC_FREQ,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int local_pll397_enable(struct clk *clk, int enable)
-{
-	u32 reg;
-	unsigned long timeout = jiffies + msecs_to_jiffies(10);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL);
-
-	if (enable == 0) {
-		reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
-		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
-	} else {
-		/* Enable PLL397 */
-		reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
-		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
-
-		/* Wait for PLL397 lock */
-		while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
-			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
-			time_before(jiffies, timeout))
-			cpu_relax();
-
-		if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
-			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0)
-			return -ENODEV;
-	}
-
-	return 0;
-}
-
-static int local_oscmain_enable(struct clk *clk, int enable)
-{
-	u32 reg;
-	unsigned long timeout = jiffies + msecs_to_jiffies(10);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-
-	if (enable == 0) {
-		reg |= LPC32XX_CLKPWR_MOSC_DISABLE;
-		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-	} else {
-		/* Enable main oscillator */
-		reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE;
-		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-
-		/* Wait for main oscillator to start */
-		while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
-			LPC32XX_CLKPWR_MOSC_DISABLE) != 0) &&
-			time_before(jiffies, timeout))
-			cpu_relax();
-
-		if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
-			LPC32XX_CLKPWR_MOSC_DISABLE) != 0)
-			return -ENODEV;
-	}
-
-	return 0;
-}
-
-static struct clk osc_pll397 = {
-	.parent		= &osc_32KHz,
-	.enable		= local_pll397_enable,
-	.rate		= LPC32XX_CLOCK_OSC_FREQ * 397,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk osc_main = {
-	.enable		= local_oscmain_enable,
-	.rate		= LPC32XX_MAIN_OSC_FREQ,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_sys;
-
-/*
- * Convert a PLL register value to a PLL output frequency
- */
-u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval)
-{
-	struct clk_pll_setup pllcfg;
-
-	pllcfg.cco_bypass_b15 = 0;
-	pllcfg.direct_output_b14 = 0;
-	pllcfg.fdbk_div_ctrl_b13 = 0;
-	if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0)
-		pllcfg.cco_bypass_b15 = 1;
-	if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0)
-		pllcfg.direct_output_b14 = 1;
-	if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0)
-		pllcfg.fdbk_div_ctrl_b13 = 1;
-	pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF);
-	pllcfg.pll_n = 1 + ((regval >> 9) & 0x3);
-	pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)];
-
-	return clk_check_pll_setup(inputclk, &pllcfg);
-}
-
-/*
- * Setup the HCLK PLL with a PLL structure
- */
-static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup)
-{
-	u32 tv, tmp = 0;
-
-	if (PllSetup->analog_on != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP;
-	if (PllSetup->cco_bypass_b15 != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS;
-	if (PllSetup->direct_output_b14 != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS;
-	if (PllSetup->fdbk_div_ctrl_b13 != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK;
-
-	tv = ffs(PllSetup->pll_p) - 1;
-	if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3))
-		return 0;
-
-	tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv);
-	tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1);
-	tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1);
-
-	return tmp;
-}
-
-/*
- * Update the ARM core PLL frequency rate variable from the actual PLL setting
- */
-static void local_update_armpll_rate(void)
-{
-	u32 clkin, pllreg;
-
-	clkin = clk_armpll.parent->rate;
-	pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
-
-	clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg);
-}
-
-/*
- * Find a PLL configuration for the selected input frequency
- */
-static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq,
-	struct clk_pll_setup *pllsetup)
-{
-	u32 ifreq, freqtol, m, n, p, fclkout;
-
-	/* Determine frequency tolerance limits */
-	freqtol = target_freq / 250;
-	ifreq = pllin_freq;
-
-	/* Is direct bypass mode possible? */
-	if (abs(pllin_freq - target_freq) <= freqtol) {
-		pllsetup->analog_on = 0;
-		pllsetup->cco_bypass_b15 = 1;
-		pllsetup->direct_output_b14 = 1;
-		pllsetup->fdbk_div_ctrl_b13 = 1;
-		pllsetup->pll_p = pll_postdivs[0];
-		pllsetup->pll_n = 1;
-		pllsetup->pll_m = 1;
-		return clk_check_pll_setup(ifreq, pllsetup);
-	} else if (target_freq <= ifreq) {
-		pllsetup->analog_on = 0;
-		pllsetup->cco_bypass_b15 = 1;
-		pllsetup->direct_output_b14 = 0;
-		pllsetup->fdbk_div_ctrl_b13 = 1;
-		pllsetup->pll_n = 1;
-		pllsetup->pll_m = 1;
-		for (p = 0; p <= 3; p++) {
-			pllsetup->pll_p = pll_postdivs[p];
-			fclkout = clk_check_pll_setup(ifreq, pllsetup);
-			if (abs(target_freq - fclkout) <= freqtol)
-				return fclkout;
-		}
-	}
-
-	/* Is direct mode possible? */
-	pllsetup->analog_on = 1;
-	pllsetup->cco_bypass_b15 = 0;
-	pllsetup->direct_output_b14 = 1;
-	pllsetup->fdbk_div_ctrl_b13 = 0;
-	pllsetup->pll_p = pll_postdivs[0];
-	for (m = 1; m <= 256; m++) {
-		for (n = 1; n <= 4; n++) {
-			/* Compute output frequency for this value */
-			pllsetup->pll_n = n;
-			pllsetup->pll_m = m;
-			fclkout = clk_check_pll_setup(ifreq,
-				pllsetup);
-			if (abs(target_freq - fclkout) <=
-				freqtol)
-				return fclkout;
-		}
-	}
-
-	/* Is integer mode possible? */
-	pllsetup->analog_on = 1;
-	pllsetup->cco_bypass_b15 = 0;
-	pllsetup->direct_output_b14 = 0;
-	pllsetup->fdbk_div_ctrl_b13 = 1;
-	for (m = 1; m <= 256; m++) {
-		for (n = 1; n <= 4; n++) {
-			for (p = 0; p < 4; p++) {
-				/* Compute output frequency */
-				pllsetup->pll_p = pll_postdivs[p];
-				pllsetup->pll_n = n;
-				pllsetup->pll_m = m;
-				fclkout = clk_check_pll_setup(
-					ifreq, pllsetup);
-				if (abs(target_freq - fclkout) <= freqtol)
-					return fclkout;
-			}
-		}
-	}
-
-	/* Try non-integer mode */
-	pllsetup->analog_on = 1;
-	pllsetup->cco_bypass_b15 = 0;
-	pllsetup->direct_output_b14 = 0;
-	pllsetup->fdbk_div_ctrl_b13 = 0;
-	for (m = 1; m <= 256; m++) {
-		for (n = 1; n <= 4; n++) {
-			for (p = 0; p < 4; p++) {
-				/* Compute output frequency */
-				pllsetup->pll_p = pll_postdivs[p];
-				pllsetup->pll_n = n;
-				pllsetup->pll_m = m;
-				fclkout = clk_check_pll_setup(
-					ifreq, pllsetup);
-				if (abs(target_freq - fclkout) <= freqtol)
-					return fclkout;
-			}
-		}
-	}
-
-	return 0;
-}
-
-static struct clk clk_armpll = {
-	.parent		= &clk_sys,
-	.get_rate	= local_return_parent_rate,
-};
-
-/*
- * Setup the USB PLL with a PLL structure
- */
-static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
-{
-	u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF;
-	reg |= tmp;
-	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
-	return clk_check_pll_setup(clk_usbpll.parent->rate,
-		pHCLKPllSetup);
-}
-
-static int local_usbpll_enable(struct clk *clk, int enable)
-{
-	u32 reg;
-	int ret = 0;
-	unsigned long timeout = jiffies + msecs_to_jiffies(20);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
-
-	__raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 |
-		LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
-		LPC32XX_CLKPWR_USB_CTRL);
-	__raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1,
-		LPC32XX_CLKPWR_USB_CTRL);
-
-	if (enable && usb_pll_valid && usb_pll_enable) {
-		ret = -ENODEV;
-		/*
-		 * If the PLL rate has been previously set, then the rate
-		 * in the PLL register is valid and can be enabled here.
-		 * Otherwise, it needs to be enabled as part of setrate.
-		 */
-
-		/*
-		 * Gate clock into PLL
-		 */
-		reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
-		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
-		/*
-		 * Enable PLL
-		 */
-		reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP;
-		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
-		/*
-		 * Wait for PLL to lock
-		 */
-		while (time_before(jiffies, timeout) && (ret == -ENODEV)) {
-			reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
-			if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
-				ret = 0;
-			else
-				udelay(10);
-		}
-
-		/*
-		 * Gate clock from PLL if PLL is locked
-		 */
-		if (ret == 0) {
-			__raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2,
-				LPC32XX_CLKPWR_USB_CTRL);
-		} else {
-			__raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
-				LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
-				LPC32XX_CLKPWR_USB_CTRL);
-		}
-	} else if ((enable == 0) && usb_pll_valid  && usb_pll_enable) {
-		usb_pll_valid = 0;
-		usb_pll_enable = 0;
-	}
-
-	return ret;
-}
-
-static unsigned long local_usbpll_round_rate(struct clk *clk,
-	unsigned long rate)
-{
-	u32 clkin, usbdiv;
-	struct clk_pll_setup pllsetup;
-
-	/*
-	 * Unlike other clocks, this clock has a KHz input rate, so bump
-	 * it up to work with the PLL function
-	 */
-	rate = rate * 1000;
-
-	clkin = clk->get_rate(clk);
-	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
-		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
-	clkin = clkin / usbdiv;
-
-	/* Try to find a good rate setup */
-	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
-		return 0;
-
-	return clk_check_pll_setup(clkin, &pllsetup);
-}
-
-static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -ENODEV;
-	u32 clkin, usbdiv;
-	struct clk_pll_setup pllsetup;
-
-	/*
-	 * Unlike other clocks, this clock has a KHz input rate, so bump
-	 * it up to work with the PLL function
-	 */
-	rate = rate * 1000;
-
-	clkin = clk->get_rate(clk->parent);
-	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
-		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
-	clkin = clkin / usbdiv;
-
-	/* Try to find a good rate setup */
-	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
-		return -EINVAL;
-
-	/*
-	 * Disable PLL clocks during PLL change
-	 */
-	local_usbpll_enable(clk, 0);
-	pllsetup.analog_on = 0;
-	local_clk_usbpll_setup(&pllsetup);
-
-	/*
-	 * Start USB PLL and check PLL status
-	 */
-
-	usb_pll_valid = 1;
-	usb_pll_enable = 1;
-
-	ret = local_usbpll_enable(clk, 1);
-	if (ret >= 0)
-		clk->rate = clk_check_pll_setup(clkin, &pllsetup);
-
-	return ret;
-}
-
-static struct clk clk_usbpll = {
-	.parent		= &osc_main,
-	.set_rate	= local_usbpll_set_rate,
-	.enable		= local_usbpll_enable,
-	.rate		= 48000, /* In KHz */
-	.get_rate	= local_return_parent_rate,
-	.round_rate	= local_usbpll_round_rate,
-};
-
-static u32 clk_get_hclk_div(void)
-{
-	static const u32 hclkdivs[4] = {1, 2, 4, 4};
-	return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(
-		__raw_readl(LPC32XX_CLKPWR_HCLK_DIV))];
-}
-
-static struct clk clk_hclk = {
-	.parent		= &clk_armpll,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_pclk = {
-	.parent		= &clk_armpll,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int local_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(clk->enable_reg);
-
-	if (enable == 0)
-		tmp &= ~clk->enable_mask;
-	else
-		tmp |= clk->enable_mask;
-
-	__raw_writel(tmp, clk->enable_reg);
-
-	return 0;
-}
-
-/* Peripheral clock sources */
-static struct clk clk_timer0 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_timer1 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_timer2 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_timer3 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_mpwm = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_wdt = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMER_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_vfp9 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_DEBUG_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_dma = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_DMA_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_pwm = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_PWM_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN |
-			  LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK |
-			  LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(1) |
-			  LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN |
-			  LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK |
-			  LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(1),
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart3 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart4 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart5 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart6 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2c0 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2c1 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2c2 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= io_p2v(LPC32XX_USB_BASE + 0xFF4),
-	.enable_mask	= 0x4,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_ssp0 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_ssp1 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_kscan = {
-	.parent		= &osc_32KHz,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_KEY_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_nand = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_NAND_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN |
-			  LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_nand_mlc = {
-	.parent         = &clk_hclk,
-	.enable         = local_onoff_enable,
-	.enable_reg     = LPC32XX_CLKPWR_NAND_CLK_CTRL,
-	.enable_mask    = LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN |
-			  LPC32XX_CLKPWR_NANDCLK_DMA_INT |
-			  LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC,
-	.get_rate       = local_return_parent_rate,
-};
-
-static struct clk clk_i2s0 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2s1 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN |
-			  LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_net = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_MACCLK_CTRL,
-	.enable_mask	= (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN |
-		LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN |
-		LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN),
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_rtc = {
-	.parent		= &osc_32KHz,
-	.rate		= 1, /* 1 Hz */
-	.get_rate	= local_return_parent_rate,
-};
-
-static int local_usb_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	if (enable) {
-		/* Set up I2C pull levels */
-		tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
-		tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE;
-		__raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
-	}
-
-	return local_onoff_enable(clk, enable);
-}
-
-static struct clk clk_usbd = {
-	.parent		= &clk_usbpll,
-	.enable		= local_usb_enable,
-	.enable_reg	= LPC32XX_CLKPWR_USB_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_USBCTRL_HCLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-#define OTG_ALWAYS_MASK		(LPC32XX_USB_OTG_OTG_CLOCK_ON | \
-				 LPC32XX_USB_OTG_I2C_CLOCK_ON)
-
-static int local_usb_otg_enable(struct clk *clk, int enable)
-{
-	int to = 1000;
-
-	if (enable) {
-		__raw_writel(clk->enable_mask, clk->enable_reg);
-
-		while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) &
-			clk->enable_mask) != clk->enable_mask) && (to > 0))
-			to--;
-	} else {
-		__raw_writel(OTG_ALWAYS_MASK, clk->enable_reg);
-
-		while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) &
-			OTG_ALWAYS_MASK) != OTG_ALWAYS_MASK) && (to > 0))
-			to--;
-	}
-
-	if (to)
-		return 0;
-	else
-		return -1;
-}
-
-static struct clk clk_usb_otg_dev = {
-	.parent		= &clk_usbpll,
-	.enable		= local_usb_otg_enable,
-	.enable_reg	= LPC32XX_USB_OTG_CLK_CTRL,
-	.enable_mask	= LPC32XX_USB_OTG_AHB_M_CLOCK_ON |
-			  LPC32XX_USB_OTG_OTG_CLOCK_ON |
-			  LPC32XX_USB_OTG_DEV_CLOCK_ON |
-			  LPC32XX_USB_OTG_I2C_CLOCK_ON,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_usb_otg_host = {
-	.parent		= &clk_usbpll,
-	.enable		= local_usb_otg_enable,
-	.enable_reg	= LPC32XX_USB_OTG_CLK_CTRL,
-	.enable_mask	= LPC32XX_USB_OTG_AHB_M_CLOCK_ON |
-			  LPC32XX_USB_OTG_OTG_CLOCK_ON |
-			  LPC32XX_USB_OTG_HOST_CLOCK_ON |
-			  LPC32XX_USB_OTG_I2C_CLOCK_ON,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int tsc_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	/* Make sure 32KHz clock is the selected clock */
-	tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-	tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
-	__raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-
-	if (enable == 0)
-		__raw_writel(0, clk->enable_reg);
-	else
-		__raw_writel(clk->enable_mask, clk->enable_reg);
-
-	return 0;
-}
-
-static struct clk clk_tsc = {
-	.parent		= &osc_32KHz,
-	.enable		= tsc_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_ADC_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int adc_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-	u32 divider;
-
-	/* Use PERIPH_CLOCK */
-	tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-	tmp |= LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
-	/*
-	 * Set clock divider so that we have equal to or less than
-	 * 4.5MHz clock at ADC
-	 */
-	divider = clk->get_rate(clk) / 4500000 + 1;
-	tmp |= divider;
-	__raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-
-	/* synchronize rate of this clock w/ actual HW setting */
-	clk->rate = clk->get_rate(clk->parent) / divider;
-
-	if (enable == 0)
-		__raw_writel(0, clk->enable_reg);
-	else
-		__raw_writel(clk->enable_mask, clk->enable_reg);
-
-	return 0;
-}
-
-static struct clk clk_adc = {
-	.parent		= &clk_pclk,
-	.enable		= adc_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_ADC_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int mmc_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
-		~(LPC32XX_CLKPWR_MSCARD_SDCARD_EN |
-		  LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN |
-		  LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS |
-		  LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS |
-		  LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS |
-		  LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS);
-
-	/* If rate is 0, disable clock */
-	if (enable != 0)
-		tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN |
-			LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN;
-
-	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
-
-	return 0;
-}
-
-static unsigned long mmc_get_rate(struct clk *clk)
-{
-	u32 div, rate, oldclk;
-
-	/* The MMC clock must be on when accessing an MMC register */
-	oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
-	__raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
-		LPC32XX_CLKPWR_MS_CTRL);
-	div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
-	__raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
-
-	/* Get the parent clock rate */
-	rate = clk->parent->get_rate(clk->parent);
-
-	/* Get the MMC controller clock divider value */
-	div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
-
-	if (!div)
-		div = 1;
-
-	return rate / div;
-}
-
-static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long div, prate;
-
-	/* Get the parent clock rate */
-	prate = clk->parent->get_rate(clk->parent);
-
-	if (rate >= prate)
-		return prate;
-
-	div = prate / rate;
-	if (div > 0xf)
-		div = 0xf;
-
-	return prate / div;
-}
-
-static int mmc_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 tmp;
-	unsigned long prate, div, crate = mmc_round_rate(clk, rate);
-
-	prate = clk->parent->get_rate(clk->parent);
-
-	div = prate / crate;
-
-	/* The MMC clock must be on when accessing an MMC register */
-	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
-		~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
-	tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div) |
-		LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
-	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
-
-	return 0;
-}
-
-static struct clk clk_mmc = {
-	.parent		= &clk_armpll,
-	.set_rate	= mmc_set_rate,
-	.get_rate	= mmc_get_rate,
-	.round_rate	= mmc_round_rate,
-	.enable		= mmc_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_MS_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
-};
-
-static unsigned long clcd_get_rate(struct clk *clk)
-{
-	u32 tmp, div, rate, oldclk;
-
-	/* The LCD clock must be on when accessing an LCD register */
-	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
-	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
-		LPC32XX_CLKPWR_LCDCLK_CTRL);
-	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
-	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
-
-	rate = clk->parent->get_rate(clk->parent);
-
-	/* Only supports internal clocking */
-	if (tmp & TIM2_BCD)
-		return rate;
-
-	div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22);
-	tmp = rate / (2 + div);
-
-	return tmp;
-}
-
-static int clcd_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 tmp, prate, div, oldclk;
-
-	/* The LCD clock must be on when accessing an LCD register */
-	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
-	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
-		LPC32XX_CLKPWR_LCDCLK_CTRL);
-
-	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD;
-	prate = clk->parent->get_rate(clk->parent);
-
-	if (rate < prate) {
-		/* Find closest divider */
-		div = prate / rate;
-		if (div >= 2) {
-			div -= 2;
-			tmp &= ~TIM2_BCD;
-		}
-
-		tmp &= ~(0xF800001F);
-		tmp |= (div & 0x1F);
-		tmp |= (((div >> 5) & 0x1F) << 27);
-	}
-
-	__raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
-	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
-
-	return 0;
-}
-
-static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 prate, div;
-
-	prate = clk->parent->get_rate(clk->parent);
-
-	if (rate >= prate)
-		rate = prate;
-	else {
-		div = prate / rate;
-		if (div > 0x3ff)
-			div = 0x3ff;
-
-		rate = prate / div;
-	}
-
-	return rate;
-}
-
-static struct clk clk_lcd = {
-	.parent		= &clk_hclk,
-	.set_rate	= clcd_set_rate,
-	.get_rate	= clcd_get_rate,
-	.round_rate	= clcd_round_rate,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_LCDCLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
-};
-
-static void local_clk_disable(struct clk *clk)
-{
-	/* Don't attempt to disable clock if it has no users */
-	if (clk->usecount > 0) {
-		clk->usecount--;
-
-		/* Only disable clock when it has no more users */
-		if ((clk->usecount == 0) && (clk->enable))
-			clk->enable(clk, 0);
-
-		/* Check parent clocks, they may need to be disabled too */
-		if (clk->parent)
-			local_clk_disable(clk->parent);
-	}
-}
-
-static int local_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	/* Enable parent clocks first and update use counts */
-	if (clk->parent)
-		ret = local_clk_enable(clk->parent);
-
-	if (!ret) {
-		/* Only enable clock if it's currently disabled */
-		if ((clk->usecount == 0) && (clk->enable))
-			ret = clk->enable(clk, 1);
-
-		if (!ret)
-			clk->usecount++;
-		else if (clk->parent)
-			local_clk_disable(clk->parent);
-	}
-
-	return ret;
-}
-
-/*
- * clk_enable - inform the system when the clock source should be running.
- */
-int clk_enable(struct clk *clk)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&global_clkregs_lock, flags);
-	ret = local_clk_enable(clk);
-	spin_unlock_irqrestore(&global_clkregs_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/*
- * clk_disable - inform the system when the clock source is no longer required
- */
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&global_clkregs_lock, flags);
-	local_clk_disable(clk);
-	spin_unlock_irqrestore(&global_clkregs_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/*
- * clk_get_rate - obtain the current clock rate (in Hz) for a clock source
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->get_rate(clk);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*
- * clk_set_rate - set the clock rate for a clock source
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	/*
-	 * Most system clocks can only be enabled or disabled, with
-	 * the actual rate set as part of the peripheral dividers
-	 * instead of high level clock control
-	 */
-	if (clk->set_rate)
-		ret = clk->set_rate(clk, rate);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/*
- * clk_round_rate - adjust a rate to the exact rate a clock can provide
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk->round_rate)
-		rate = clk->round_rate(clk, rate);
-	else
-		rate = clk->get_rate(clk);
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/*
- * clk_set_parent - set the parent clock source for this clock
- */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	/* Clock re-parenting is not supported */
-	return -EINVAL;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/*
- * clk_get_parent - get the parent clock source for this clock
- */
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-static struct clk_lookup lookups[] = {
-	CLKDEV_INIT(NULL, "osc_32KHz", &osc_32KHz),
-	CLKDEV_INIT(NULL, "osc_pll397", &osc_pll397),
-	CLKDEV_INIT(NULL, "osc_main", &osc_main),
-	CLKDEV_INIT(NULL, "sys_ck", &clk_sys),
-	CLKDEV_INIT(NULL, "arm_pll_ck", &clk_armpll),
-	CLKDEV_INIT(NULL, "ck_pll5", &clk_usbpll),
-	CLKDEV_INIT(NULL, "hclk_ck", &clk_hclk),
-	CLKDEV_INIT(NULL, "pclk_ck", &clk_pclk),
-	CLKDEV_INIT(NULL, "timer0_ck", &clk_timer0),
-	CLKDEV_INIT(NULL, "timer1_ck", &clk_timer1),
-	CLKDEV_INIT(NULL, "timer2_ck", &clk_timer2),
-	CLKDEV_INIT(NULL, "timer3_ck", &clk_timer3),
-	CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9),
-	CLKDEV_INIT("pl08xdmac", NULL, &clk_dma),
-	CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt),
-	CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm),
-	CLKDEV_INIT("400e8000.mpwm", NULL, &clk_mpwm),
-	CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3),
-	CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4),
-	CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5),
-	CLKDEV_INIT(NULL, "uart6_ck", &clk_uart6),
-	CLKDEV_INIT("400a0000.i2c", NULL, &clk_i2c0),
-	CLKDEV_INIT("400a8000.i2c", NULL, &clk_i2c1),
-	CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2),
-	CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0),
-	CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1),
-	CLKDEV_INIT("40050000.key", NULL, &clk_kscan),
-	CLKDEV_INIT("20020000.flash", NULL, &clk_nand),
-	CLKDEV_INIT("200a8000.flash", NULL, &clk_nand_mlc),
-	CLKDEV_INIT("40048000.adc", NULL, &clk_adc),
-	CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0),
-	CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1),
-	CLKDEV_INIT("40048000.tsc", NULL, &clk_tsc),
-	CLKDEV_INIT("20098000.sd", NULL, &clk_mmc),
-	CLKDEV_INIT("31060000.ethernet", NULL, &clk_net),
-	CLKDEV_INIT("dev:clcd", NULL, &clk_lcd),
-	CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd),
-	CLKDEV_INIT("31020000.ohci", "ck_usbd", &clk_usbd),
-	CLKDEV_INIT("31020000.usbd", "ck_usb_otg", &clk_usb_otg_dev),
-	CLKDEV_INIT("31020000.ohci", "ck_usb_otg", &clk_usb_otg_host),
-	CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc),
-};
-
-static int __init clk_init(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/*
-	 * Setup muxed SYSCLK for HCLK PLL base -this selects the
-	 * parent clock used for the ARM PLL and is used to derive
-	 * the many system clock rates in the device.
-	 */
-	if (clk_is_sysclk_mainosc() != 0)
-		clk_sys.parent = &osc_main;
-	else
-		clk_sys.parent = &osc_pll397;
-
-	clk_sys.rate = clk_sys.parent->rate;
-
-	/* Compute the current ARM PLL and USB PLL frequencies */
-	local_update_armpll_rate();
-
-	/* Compute HCLK and PCLK bus rates */
-	clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div();
-	clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div();
-
-	/*
-	 * Enable system clocks - this step is somewhat formal, as the
-	 * clocks are already running, but it does get the clock data
-	 * inline with the actual system state. Never disable these
-	 * clocks as they will only stop if the system is going to sleep.
-	 * In that case, the chip/system power management functions will
-	 * handle clock gating.
-	 */
-	if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk))
-		printk(KERN_ERR "Error enabling system HCLK and PCLK\n");
-
-	/*
-	 * Timers 0 and 1 were enabled and are being used by the high
-	 * resolution tick function prior to this driver being initialized.
-	 * Tag them now as used.
-	 */
-	if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1))
-		printk(KERN_ERR "Error enabling timer tick clocks\n");
-
-	return 0;
-}
-core_initcall(clk_init);
-