Initial import

1 files changed, 248 insertions, 0 deletions

diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
new file mode 100644
index 000000000..afee9083a
--- /dev/null
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -0,0 +1,248 @@
+/*
+ * Device Tree support for Armada 370 and XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/clocksource.h>
+#include <linux/dma-mapping.h>
+#include <linux/memblock.h>
+#include <linux/mbus.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/irqchip.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/smp_scu.h>
+#include "armada-370-xp.h"
+#include "common.h"
+#include "coherency.h"
+#include "mvebu-soc-id.h"
+
+static void __iomem *scu_base;
+
+/*
+ * Enables the SCU when available. Obviously, this is only useful on
+ * Cortex-A based SOCs, not on PJ4B based ones.
+ */
+static void __init mvebu_scu_enable(void)
+{
+	struct device_node *np =
+		of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+	if (np) {
+		scu_base = of_iomap(np, 0);
+		scu_enable(scu_base);
+		of_node_put(np);
+	}
+}
+
+void __iomem *mvebu_get_scu_base(void)
+{
+	return scu_base;
+}
+
+/*
+ * When returning from suspend, the platform goes through the
+ * bootloader, which executes its DDR3 training code. This code has
+ * the unfortunate idea of using the first 10 KB of each DRAM bank to
+ * exercise the RAM and calculate the optimal timings. Therefore, this
+ * area of RAM is overwritten, and shouldn't be used by the kernel if
+ * suspend/resume is supported.
+ */
+
+#ifdef CONFIG_SUSPEND
+#define MVEBU_DDR_TRAINING_AREA_SZ (10 * SZ_1K)
+static int __init mvebu_scan_mem(unsigned long node, const char *uname,
+				 int depth, void *data)
+{
+	const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+	const __be32 *reg, *endp;
+	int l;
+
+	if (type == NULL || strcmp(type, "memory"))
+		return 0;
+
+	reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
+	if (reg == NULL)
+		reg = of_get_flat_dt_prop(node, "reg", &l);
+	if (reg == NULL)
+		return 0;
+
+	endp = reg + (l / sizeof(__be32));
+	while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+		u64 base, size;
+
+		base = dt_mem_next_cell(dt_root_addr_cells, &reg);
+		size = dt_mem_next_cell(dt_root_size_cells, &reg);
+
+		memblock_reserve(base, MVEBU_DDR_TRAINING_AREA_SZ);
+	}
+
+	return 0;
+}
+
+static void __init mvebu_memblock_reserve(void)
+{
+	of_scan_flat_dt(mvebu_scan_mem, NULL);
+}
+#else
+static void __init mvebu_memblock_reserve(void) {}
+#endif
+
+/*
+ * Early versions of Armada 375 SoC have a bug where the BootROM
+ * leaves an external data abort pending. The kernel is hit by this
+ * data abort as soon as it enters userspace, because it unmasks the
+ * data aborts at this moment. We register a custom abort handler
+ * below to ignore the first data abort to work around this
+ * problem.
+ */
+static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr,
+					struct pt_regs *regs)
+{
+	static int ignore_first;
+
+	if (!ignore_first && fsr == 0x1406) {
+		ignore_first = 1;
+		return 0;
+	}
+
+	return 1;
+}
+
+static void __init mvebu_init_irq(void)
+{
+	irqchip_init();
+	mvebu_scu_enable();
+	coherency_init();
+	BUG_ON(mvebu_mbus_dt_init(coherency_available()));
+}
+
+static void __init external_abort_quirk(void)
+{
+	u32 dev, rev;
+
+	if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV)
+		return;
+
+	hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0,
+			"imprecise external abort");
+}
+
+static void __init i2c_quirk(void)
+{
+	struct device_node *np;
+	u32 dev, rev;
+
+	/*
+	 * Only revisons more recent than A0 support the offload
+	 * mechanism. We can exit only if we are sure that we can
+	 * get the SoC revision and it is more recent than A0.
+	 */
+	if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > MV78XX0_A0_REV)
+		return;
+
+	for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") {
+		struct property *new_compat;
+
+		new_compat = kzalloc(sizeof(*new_compat), GFP_KERNEL);
+
+		new_compat->name = kstrdup("compatible", GFP_KERNEL);
+		new_compat->length = sizeof("marvell,mv78230-a0-i2c");
+		new_compat->value = kstrdup("marvell,mv78230-a0-i2c",
+						GFP_KERNEL);
+
+		of_update_property(np, new_compat);
+	}
+	return;
+}
+
+static void __init mvebu_dt_init(void)
+{
+	if (of_machine_is_compatible("marvell,armadaxp"))
+		i2c_quirk();
+	if (of_machine_is_compatible("marvell,a375-db"))
+		external_abort_quirk();
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const armada_370_xp_dt_compat[] __initconst = {
+	"marvell,armada-370-xp",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+/*
+ * The following field (.smp) is still needed to ensure backward
+ * compatibility with old Device Trees that were not specifying the
+ * cpus enable-method property.
+ */
+	.smp		= smp_ops(armada_xp_smp_ops),
+	.init_machine	= mvebu_dt_init,
+	.init_irq       = mvebu_init_irq,
+	.restart	= mvebu_restart,
+	.reserve        = mvebu_memblock_reserve,
+	.dt_compat	= armada_370_xp_dt_compat,
+MACHINE_END
+
+static const char * const armada_375_dt_compat[] __initconst = {
+	"marvell,armada375",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.init_irq       = mvebu_init_irq,
+	.init_machine	= mvebu_dt_init,
+	.restart	= mvebu_restart,
+	.dt_compat	= armada_375_dt_compat,
+MACHINE_END
+
+static const char * const armada_38x_dt_compat[] __initconst = {
+	"marvell,armada380",
+	"marvell,armada385",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.init_irq       = mvebu_init_irq,
+	.restart	= mvebu_restart,
+	.dt_compat	= armada_38x_dt_compat,
+MACHINE_END
+
+static const char * const armada_39x_dt_compat[] __initconst = {
+	"marvell,armada390",
+	"marvell,armada398",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADA_39X_DT, "Marvell Armada 39x (Device Tree)")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.init_irq       = mvebu_init_irq,
+	.restart	= mvebu_restart,
+	.dt_compat	= armada_39x_dt_compat,
+MACHINE_END