Initial import

88 files changed, 19343 insertions, 0 deletions

diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
new file mode 100644
index 000000000..cdd05f2e6
--- /dev/null
+++ b/arch/arm/mach-omap1/Kconfig
@@ -0,0 +1,169 @@
+if ARCH_OMAP1
+
+menu "TI OMAP1 specific features"
+
+comment "OMAP Core Type"
+	depends on ARCH_OMAP1
+
+config ARCH_OMAP730
+	depends on ARCH_OMAP1
+	bool "OMAP730 Based System"
+	select ARCH_OMAP_OTG
+	select CPU_ARM926T
+	select OMAP_MPU_TIMER
+
+config ARCH_OMAP850
+	depends on ARCH_OMAP1
+	bool "OMAP850 Based System"
+	select ARCH_OMAP_OTG
+	select CPU_ARM926T
+
+config ARCH_OMAP15XX
+	depends on ARCH_OMAP1
+	default y
+	bool "OMAP15xx Based System"
+	select CPU_ARM925T
+	select OMAP_MPU_TIMER
+
+config ARCH_OMAP16XX
+	depends on ARCH_OMAP1
+	bool "OMAP16xx Based System"
+	select ARCH_OMAP_OTG
+	select CPU_ARM926T
+
+comment "OMAP Board Type"
+	depends on ARCH_OMAP1
+
+config MACH_OMAP_INNOVATOR
+	bool "TI Innovator"
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
+	help
+          TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
+          have such a board.
+
+config MACH_OMAP_H2
+	bool "TI H2 Support"
+	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+    	help
+	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
+	  a board.
+
+config MACH_OMAP_H3
+	bool "TI H3 Support"
+	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+    	help
+	  TI OMAP 1710 H3 board support. Say Y here if you have such
+	  a board.
+
+config MACH_HERALD
+	bool "HTC Herald"
+	depends on ARCH_OMAP850
+	help
+	  HTC Herald smartphone support (AKA T-Mobile Wing, ...)
+
+config MACH_OMAP_OSK
+	bool "TI OSK Support"
+	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+    	help
+	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
+          if you have such a board.
+
+config OMAP_OSK_MISTRAL
+	bool "Mistral QVGA board Support"
+	depends on MACH_OMAP_OSK
+    	help
+	  The OSK supports an optional add-on board with a Quarter-VGA
+	  touchscreen, PDA-ish buttons, a resume button, bicolor LED,
+	  and camera connector.  Say Y here if you have this board.
+
+config MACH_OMAP_PERSEUS2
+	bool "TI Perseus2"
+	depends on ARCH_OMAP1 && ARCH_OMAP730
+    	help
+	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
+	  a board.
+
+config MACH_OMAP_FSAMPLE
+	bool "TI F-Sample"
+	depends on ARCH_OMAP1 && ARCH_OMAP730
+    	help
+	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
+	  a board.
+
+config MACH_VOICEBLUE
+	bool "Voiceblue"
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	help
+	  Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
+	  such a board.
+
+config MACH_OMAP_PALMTE
+	bool "Palm Tungsten E"
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	help
+	  Support for the Palm Tungsten E PDA.  To boot the kernel, you'll
+	  need a PalmOS compatible bootloader; check out
+	  http://palmtelinux.sourceforge.net/ for more information.
+	  Say Y here if you have this PDA model, say N otherwise.
+
+config MACH_OMAP_PALMZ71
+	bool "Palm Zire71"
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	help
+	 Support for the Palm Zire71 PDA. To boot the kernel,
+	 you'll need a PalmOS compatible bootloader; check out
+	 http://hackndev.com/palm/z71 for more information.
+	 Say Y here if you have such a PDA, say N otherwise.
+
+config MACH_OMAP_PALMTT
+	bool "Palm Tungsten|T"
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	help
+	  Support for the Palm Tungsten|T PDA. To boot the kernel, you'll
+	  need a PalmOS compatible bootloader (Garux); check out
+	  http://garux.sourceforge.net/ for more information.
+	  Say Y here if you have this PDA model, say N otherwise.
+
+config MACH_SX1
+	bool "Siemens SX1"
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	select I2C
+	help
+	  Support for the Siemens SX1 phone. To boot the kernel,
+	  you'll need a SX1 compatible bootloader; check out
+	  http://forum.oslik.ru and
+	  http://www.handhelds.org/moin/moin.cgi/SiemensSX1
+	  for more information.
+	  Say Y here if you have such a phone, say NO otherwise.
+
+config MACH_NOKIA770
+	bool "Nokia 770"
+	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+	help
+	  Support for the Nokia 770 Internet Tablet. Say Y here if you
+	  have such a device.
+
+config MACH_AMS_DELTA
+	bool "Amstrad E3 (Delta)"
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	select FIQ
+	select GPIO_GENERIC_PLATFORM
+	select LEDS_GPIO_REGISTER
+	select REGULATOR
+	select REGULATOR_FIXED_VOLTAGE
+	help
+	  Support for the Amstrad E3 (codename Delta) videophone. Say Y here
+	  if you have such a device.
+
+config MACH_OMAP_GENERIC
+	bool "Generic OMAP board"
+	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
+	help
+          Support for generic OMAP-1510, 1610 or 1710 board with
+          no FPGA. Can be used as template for porting Linux to
+          custom OMAP boards. Say Y here if you have a custom
+          board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
new file mode 100644
index 000000000..3889b6cd2
--- /dev/null
+++ b/arch/arm/mach-omap1/Makefile
@@ -0,0 +1,63 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common support
+obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
+	 serial.o devices.o dma.o fb.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
+
+ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
+obj-y += mcbsp.o
+endif
+
+obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
+
+# OCPI interconnect support for 1710, 1610 and 5912
+obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
+
+# Power Management
+obj-$(CONFIG_PM) += pm.o sleep.o
+
+i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
+obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
+
+led-y := leds.o
+
+usb-fs-$(CONFIG_USB)			:= usb.o
+obj-y					+= $(usb-fs-m) $(usb-fs-y)
+
+# Specific board support
+obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o \
+					   board-nand.o
+obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
+obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
+obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o board-nand.o
+obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o board-nand.o
+obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
+obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o \
+					   board-nand.o
+obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
+obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
+obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
+obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
+obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
+obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o ams-delta-fiq.o \
+					   ams-delta-fiq-handler.o
+obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
+obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o
+
+ifeq ($(CONFIG_ARCH_OMAP15XX),y)
+# Innovator-1510 FPGA
+obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
+endif
+
+# GPIO
+obj-$(CONFIG_ARCH_OMAP730)		+= gpio7xx.o
+obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
+obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
+obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
+
+ifneq ($(CONFIG_FB_OMAP),)
+obj-y += lcd_dma.o
+endif
diff --git a/arch/arm/mach-omap1/Makefile.boot b/arch/arm/mach-omap1/Makefile.boot
new file mode 100644
index 000000000..13bda8dbd
--- /dev/null
+++ b/arch/arm/mach-omap1/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y		+= 0x10008000
+params_phys-y		:= 0x10000100
+initrd_phys-y		:= 0x10800000
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
new file mode 100644
index 000000000..3d1e1c250
--- /dev/null
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -0,0 +1,281 @@
+/*
+ *  linux/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+ *
+ *  Based on  linux/arch/arm/lib/floppydma.S
+ *  Renamed and modified to work with 2.6 kernel by Matt Callow
+ *  Copyright (C) 1995, 1996 Russell King
+ *  Copyright (C) 2004 Pete Trapps
+ *  Copyright (C) 2006 Matt Callow
+ *  Copyright (C) 2010 Janusz Krzysztofik
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#include <mach/board-ams-delta.h>
+
+#include <mach/irqs.h>
+#include <mach/ams-delta-fiq.h>
+
+#include "iomap.h"
+
+/*
+ * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
+ * Unfortunately, those were not placed in a separate header file.
+ */
+#define OMAP1510_GPIO_BASE		0xFFFCE000
+#define OMAP1510_GPIO_DATA_INPUT	0x00
+#define OMAP1510_GPIO_DATA_OUTPUT	0x04
+#define OMAP1510_GPIO_DIR_CONTROL	0x08
+#define OMAP1510_GPIO_INT_CONTROL	0x0c
+#define OMAP1510_GPIO_INT_MASK		0x10
+#define OMAP1510_GPIO_INT_STATUS	0x14
+#define OMAP1510_GPIO_PIN_CONTROL	0x18
+
+/* GPIO register bitmasks */
+#define KEYBRD_DATA_MASK		(0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA)
+#define KEYBRD_CLK_MASK			(0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_CLK)
+#define MODEM_IRQ_MASK			(0x1 << AMS_DELTA_GPIO_PIN_MODEM_IRQ)
+#define HOOK_SWITCH_MASK		(0x1 << AMS_DELTA_GPIO_PIN_HOOK_SWITCH)
+#define OTHERS_MASK			(MODEM_IRQ_MASK | HOOK_SWITCH_MASK)
+
+/* IRQ handler register bitmasks */
+#define DEFERRED_FIQ_MASK		(0x1 << (INT_DEFERRED_FIQ % IH2_BASE))
+#define GPIO_BANK1_MASK  		(0x1 << INT_GPIO_BANK1)
+
+/* Driver buffer byte offsets */
+#define BUF_MASK			(FIQ_MASK * 4)
+#define BUF_STATE			(FIQ_STATE * 4)
+#define BUF_KEYS_CNT			(FIQ_KEYS_CNT * 4)
+#define BUF_TAIL_OFFSET			(FIQ_TAIL_OFFSET * 4)
+#define BUF_HEAD_OFFSET			(FIQ_HEAD_OFFSET * 4)
+#define BUF_BUF_LEN			(FIQ_BUF_LEN * 4)
+#define BUF_KEY				(FIQ_KEY * 4)
+#define BUF_MISSED_KEYS			(FIQ_MISSED_KEYS * 4)
+#define BUF_BUFFER_START		(FIQ_BUFFER_START * 4)
+#define BUF_GPIO_INT_MASK		(FIQ_GPIO_INT_MASK * 4)
+#define BUF_KEYS_HICNT			(FIQ_KEYS_HICNT * 4)
+#define BUF_IRQ_PEND			(FIQ_IRQ_PEND * 4)
+#define BUF_SIR_CODE_L1			(FIQ_SIR_CODE_L1 * 4)
+#define BUF_SIR_CODE_L2			(IRQ_SIR_CODE_L2 * 4)
+#define BUF_CNT_INT_00			(FIQ_CNT_INT_00 * 4)
+#define BUF_CNT_INT_KEY			(FIQ_CNT_INT_KEY * 4)
+#define BUF_CNT_INT_MDM			(FIQ_CNT_INT_MDM * 4)
+#define BUF_CNT_INT_03			(FIQ_CNT_INT_03 * 4)
+#define BUF_CNT_INT_HSW			(FIQ_CNT_INT_HSW * 4)
+#define BUF_CNT_INT_05			(FIQ_CNT_INT_05 * 4)
+#define BUF_CNT_INT_06			(FIQ_CNT_INT_06 * 4)
+#define BUF_CNT_INT_07			(FIQ_CNT_INT_07 * 4)
+#define BUF_CNT_INT_08			(FIQ_CNT_INT_08 * 4)
+#define BUF_CNT_INT_09			(FIQ_CNT_INT_09 * 4)
+#define BUF_CNT_INT_10			(FIQ_CNT_INT_10 * 4)
+#define BUF_CNT_INT_11			(FIQ_CNT_INT_11 * 4)
+#define BUF_CNT_INT_12			(FIQ_CNT_INT_12 * 4)
+#define BUF_CNT_INT_13			(FIQ_CNT_INT_13 * 4)
+#define BUF_CNT_INT_14			(FIQ_CNT_INT_14 * 4)
+#define BUF_CNT_INT_15			(FIQ_CNT_INT_15 * 4)
+#define BUF_CIRC_BUFF			(FIQ_CIRC_BUFF * 4)
+
+
+/*
+ * Register usage
+ * r8  - temporary
+ * r9  - the driver buffer
+ * r10 - temporary
+ * r11 - interrupts mask
+ * r12 - base pointers
+ * r13 - interrupts status
+ */
+
+	.text
+
+	.global qwerty_fiqin_end
+
+ENTRY(qwerty_fiqin_start)
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+	@ FIQ intrrupt handler
+	ldr r12, omap_ih1_base			@ set pointer to level1 handler
+
+	ldr r11, [r12, #IRQ_MIR_REG_OFFSET]	@ fetch interrupts mask
+
+	ldr r13, [r12, #IRQ_ITR_REG_OFFSET]	@ fetch interrupts status
+	bics r13, r13, r11			@ clear masked - any left?
+	beq exit				@ none - spurious FIQ? exit
+
+	ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET]	@ get requested interrupt number
+
+	mov r8, #2				@ reset FIQ agreement
+	str r8, [r12, #IRQ_CONTROL_REG_OFFSET]
+
+	cmp r10, #INT_GPIO_BANK1		@ is it GPIO bank interrupt?
+	beq gpio				@ yes - process it
+
+	mov r8, #1
+	orr r8, r11, r8, lsl r10		@ mask spurious interrupt
+	str r8, [r12, #IRQ_MIR_REG_OFFSET]
+exit:
+	subs	pc, lr, #4			@ return from FIQ
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@
+gpio:	@ GPIO bank interrupt handler
+	ldr r12, omap1510_gpio_base		@ set base pointer to GPIO bank
+
+	ldr r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ fetch GPIO interrupts mask
+restart:
+	ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS]	@ fetch status bits
+	bics r13, r13, r11			@ clear masked - any left?
+	beq exit				@ no - spurious interrupt? exit
+
+	orr r11, r11, r13			@ mask all requested interrupts
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
+
+	ands r10, r13, #KEYBRD_CLK_MASK		@ extract keyboard status - set?
+	beq hksw				@ no - try next source
+
+
+	@@@@@@@@@@@@@@@@@@@@@@
+	@ Keyboard clock FIQ mode interrupt handler
+	@ r10 now contains KEYBRD_CLK_MASK, use it
+	str r10, [r12, #OMAP1510_GPIO_INT_STATUS]	@ ack the interrupt
+	bic r11, r11, r10				@ unmask it
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
+
+	@ Process keyboard data
+	ldr r8, [r12, #OMAP1510_GPIO_DATA_INPUT]	@ fetch GPIO input
+
+	ldr r10, [r9, #BUF_STATE]		@ fetch kbd interface state
+	cmp r10, #0				@ are we expecting start bit?
+	bne data				@ no - go to data processing
+
+	ands r8, r8, #KEYBRD_DATA_MASK		@ check start bit - detected?
+	beq hksw				@ no - try next source
+
+	@ r8 contains KEYBRD_DATA_MASK, use it
+	str r8, [r9, #BUF_STATE]		@ enter data processing state
+	@ r10 already contains 0, reuse it
+	str r10, [r9, #BUF_KEY]			@ clear keycode
+	mov r10, #2				@ reset input bit mask
+	str r10, [r9, #BUF_MASK]
+
+	@ Mask other GPIO line interrupts till key done
+	str r11, [r9, #BUF_GPIO_INT_MASK]	@ save mask for later restore
+	mvn r11, #KEYBRD_CLK_MASK		@ prepare all except kbd mask
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ store into the mask register
+
+	b restart				@ restart
+
+data:	ldr r10, [r9, #BUF_MASK]		@ fetch current input bit mask
+
+	@ r8 still contains GPIO input bits
+	ands r8, r8, #KEYBRD_DATA_MASK		@ is keyboard data line low?
+	ldreq r8, [r9, #BUF_KEY]		@ yes - fetch collected so far,
+	orreq r8, r8, r10			@ set 1 at current mask position
+	streq r8, [r9, #BUF_KEY]		@ and save back
+
+	mov r10, r10, lsl #1			@ shift mask left
+	bics r10, r10, #0x800			@ have we got all the bits?
+	strne r10, [r9, #BUF_MASK]		@ not yet - store the mask
+	bne restart				@ and restart
+
+	@ r10 already contains 0, reuse it
+	str r10, [r9, #BUF_STATE]		@ reset state to start
+
+	@ Key done - restore interrupt mask
+	ldr r10, [r9, #BUF_GPIO_INT_MASK]	@ fetch saved mask
+	and r11, r11, r10			@ unmask all saved as unmasked
+	str r11, [r12, #OMAP1510_GPIO_INT_MASK]	@ restore into the mask register
+
+	@ Try appending the keycode to the circular buffer
+	ldr r10, [r9, #BUF_KEYS_CNT]		@ get saved keystrokes count
+	ldr r8, [r9, #BUF_BUF_LEN]		@ get buffer size
+	cmp r10, r8				@ is buffer full?
+	beq hksw				@ yes - key lost, next source
+
+	add r10, r10, #1			@ incremet keystrokes counter
+	str r10, [r9, #BUF_KEYS_CNT]
+
+	ldr r10, [r9, #BUF_TAIL_OFFSET]		@ get buffer tail offset
+	@ r8 already contains buffer size
+	cmp r10, r8				@ end of buffer?
+	moveq r10, #0				@ yes - rewind to buffer start
+
+	ldr r12, [r9, #BUF_BUFFER_START]	@ get buffer start address
+	add r12, r12, r10, LSL #2		@ calculate buffer tail address
+	ldr r8, [r9, #BUF_KEY]			@ get last keycode
+	str r8, [r12]				@ append it to the buffer tail
+
+	add r10, r10, #1			@ increment buffer tail offset
+	str r10, [r9, #BUF_TAIL_OFFSET]
+
+	ldr r10, [r9, #BUF_CNT_INT_KEY]		@ increment interrupts counter
+	add r10, r10, #1
+	str r10, [r9, #BUF_CNT_INT_KEY]
+	@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+hksw:	@Is hook switch interrupt requested?
+	tst r13, #HOOK_SWITCH_MASK 		@ is hook switch status bit set?
+	beq mdm					@ no - try next source
+
+
+	@@@@@@@@@@@@@@@@@@@@@@@@
+	@ Hook switch interrupt FIQ mode simple handler
+
+	@ Don't toggle active edge, the switch always bounces
+
+	@ Increment hook switch interrupt counter
+	ldr r10, [r9, #BUF_CNT_INT_HSW]
+	add r10, r10, #1
+	str r10, [r9, #BUF_CNT_INT_HSW]
+	@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+mdm:	@Is it a modem interrupt?
+	tst r13, #MODEM_IRQ_MASK 		@ is modem status bit set?
+	beq irq					@ no - check for next interrupt
+
+
+	@@@@@@@@@@@@@@@@@@@@@@@@
+	@ Modem FIQ mode interrupt handler stub
+
+	@ Increment modem interrupt counter
+	ldr r10, [r9, #BUF_CNT_INT_MDM]
+	add r10, r10, #1
+	str r10, [r9, #BUF_CNT_INT_MDM]
+	@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+irq:	@ Place deferred_fiq interrupt request
+	ldr r12, deferred_fiq_ih_base		@ set pointer to IRQ handler
+	mov r10, #DEFERRED_FIQ_MASK		@ set deferred_fiq bit
+	str r10, [r12, #IRQ_ISR_REG_OFFSET] 	@ place it in the ISR register
+
+	ldr r12, omap1510_gpio_base		@ set pointer back to GPIO bank
+	b restart				@ check for next GPIO interrupt
+	@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+
+/*
+ * Virtual addresses for IO
+ */
+omap_ih1_base:
+	.word OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
+deferred_fiq_ih_base:
+	.word OMAP1_IO_ADDRESS(DEFERRED_FIQ_IH_BASE)
+omap1510_gpio_base:
+	.word OMAP1_IO_ADDRESS(OMAP1510_GPIO_BASE)
+qwerty_fiqin_end:
+
+/*
+ * Check the size of the FIQ,
+ * it cannot go beyond 0xffff0200, and is copied to 0xffff001c
+ */
+.if (qwerty_fiqin_end - qwerty_fiqin_start) > (0x200 - 0x1c)
+	.err
+.endif
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
new file mode 100644
index 000000000..d1f12095f
--- /dev/null
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -0,0 +1,155 @@
+/*
+ *  Amstrad E3 FIQ handling
+ *
+ *  Copyright (C) 2009 Janusz Krzysztofik
+ *  Copyright (c) 2006 Matt Callow
+ *  Copyright (c) 2004 Amstrad Plc
+ *  Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Parts of this code are taken from linux/arch/arm/mach-omap/irq.c
+ * in the MontaVista 2.4 kernel (and the Amstrad changes therein)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/io.h>
+
+#include <mach/board-ams-delta.h>
+
+#include <asm/fiq.h>
+
+#include <mach/ams-delta-fiq.h>
+
+static struct fiq_handler fh = {
+	.name	= "ams-delta-fiq"
+};
+
+/*
+ * This buffer is shared between FIQ and IRQ contexts.
+ * The FIQ and IRQ isrs can both read and write it.
+ * It is structured as a header section several 32bit slots,
+ * followed by the circular buffer where the FIQ isr stores
+ * keystrokes received from the qwerty keyboard.
+ * See ams-delta-fiq.h for details of offsets.
+ */
+unsigned int fiq_buffer[1024];
+EXPORT_SYMBOL(fiq_buffer);
+
+static unsigned int irq_counter[16];
+
+static irqreturn_t deferred_fiq(int irq, void *dev_id)
+{
+	int gpio, irq_num, fiq_count;
+	struct irq_chip *irq_chip;
+
+	irq_chip = irq_get_chip(gpio_to_irq(AMS_DELTA_GPIO_PIN_KEYBRD_CLK));
+
+	/*
+	 * For each handled GPIO interrupt, keep calling its interrupt handler
+	 * until the IRQ counter catches the FIQ incremented interrupt counter.
+	 */
+	for (gpio = AMS_DELTA_GPIO_PIN_KEYBRD_CLK;
+			gpio <= AMS_DELTA_GPIO_PIN_HOOK_SWITCH; gpio++) {
+		irq_num = gpio_to_irq(gpio);
+		fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio];
+
+		while (irq_counter[gpio] < fiq_count) {
+			if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
+				struct irq_data *d = irq_get_irq_data(irq_num);
+
+				/*
+				 * It looks like handle_edge_irq() that
+				 * OMAP GPIO edge interrupts default to,
+				 * expects interrupt already unmasked.
+				 */
+				if (irq_chip && irq_chip->irq_unmask)
+					irq_chip->irq_unmask(d);
+			}
+			generic_handle_irq(irq_num);
+
+			irq_counter[gpio]++;
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+void __init ams_delta_init_fiq(void)
+{
+	void *fiqhandler_start;
+	unsigned int fiqhandler_length;
+	struct pt_regs FIQ_regs;
+	unsigned long val, offset;
+	int i, retval;
+
+	fiqhandler_start = &qwerty_fiqin_start;
+	fiqhandler_length = &qwerty_fiqin_end - &qwerty_fiqin_start;
+	pr_info("Installing fiq handler from %p, length 0x%x\n",
+			fiqhandler_start, fiqhandler_length);
+
+	retval = claim_fiq(&fh);
+	if (retval) {
+		pr_err("ams_delta_init_fiq(): couldn't claim FIQ, ret=%d\n",
+				retval);
+		return;
+	}
+
+	retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq,
+			IRQ_TYPE_EDGE_RISING, "deferred_fiq", NULL);
+	if (retval < 0) {
+		pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval);
+		release_fiq(&fh);
+		return;
+	}
+	/*
+	 * Since no set_type() method is provided by OMAP irq chip,
+	 * switch to edge triggered interrupt type manually.
+	 */
+	offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4;
+	val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1);
+	omap_writel(val, DEFERRED_FIQ_IH_BASE + offset);
+
+	set_fiq_handler(fiqhandler_start, fiqhandler_length);
+
+	/*
+	 * Initialise the buffer which is shared
+	 * between FIQ mode and IRQ mode
+	 */
+	fiq_buffer[FIQ_GPIO_INT_MASK]	= 0;
+	fiq_buffer[FIQ_MASK]		= 0;
+	fiq_buffer[FIQ_STATE]		= 0;
+	fiq_buffer[FIQ_KEY]		= 0;
+	fiq_buffer[FIQ_KEYS_CNT]	= 0;
+	fiq_buffer[FIQ_KEYS_HICNT]	= 0;
+	fiq_buffer[FIQ_TAIL_OFFSET]	= 0;
+	fiq_buffer[FIQ_HEAD_OFFSET]	= 0;
+	fiq_buffer[FIQ_BUF_LEN]		= 256;
+	fiq_buffer[FIQ_MISSED_KEYS]	= 0;
+	fiq_buffer[FIQ_BUFFER_START]	=
+			(unsigned int) &fiq_buffer[FIQ_CIRC_BUFF];
+
+	for (i = FIQ_CNT_INT_00; i <= FIQ_CNT_INT_15; i++)
+		fiq_buffer[i] = 0;
+
+	/*
+	 * FIQ mode r9 always points to the fiq_buffer, becauses the FIQ isr
+	 * will run in an unpredictable context. The fiq_buffer is the FIQ isr's
+	 * only means of communication with the IRQ level and other kernel
+	 * context code.
+	 */
+	FIQ_regs.ARM_r9 = (unsigned int)fiq_buffer;
+	set_fiq_regs(&FIQ_regs);
+
+	pr_info("request_fiq(): fiq_buffer = %p\n", fiq_buffer);
+
+	/*
+	 * Redirect GPIO interrupts to FIQ
+	 */
+	offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4;
+	val = omap_readl(OMAP_IH1_BASE + offset) | 1;
+	omap_writel(val, OMAP_IH1_BASE + offset);
+}
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
new file mode 100644
index 000000000..2aab761ee
--- /dev/null
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -0,0 +1,633 @@
+/*
+ * linux/arch/arm/mach-omap1/board-ams-delta.c
+ *
+ * Modified from board-generic.c
+ *
+ * Board specific inits for the Amstrad E3 (codename Delta) videophone
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/basic_mmio_gpio.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/serial_8250.h>
+#include <linux/export.h>
+#include <linux/omapfb.h>
+#include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
+
+#include <media/soc_camera.h>
+
+#include <asm/serial.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-ams-delta.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <mach/mux.h>
+
+#include <mach/hardware.h>
+#include <mach/ams-delta-fiq.h>
+#include <mach/camera.h>
+#include <mach/usb.h>
+
+#include "iomap.h"
+#include "common.h"
+
+static const unsigned int ams_delta_keymap[] = {
+	KEY(0, 0, KEY_F1),		/* Advert    */
+
+	KEY(0, 3, KEY_COFFEE),		/* Games     */
+	KEY(0, 2, KEY_QUESTION),	/* Directory */
+	KEY(2, 3, KEY_CONNECT),		/* Internet  */
+	KEY(1, 2, KEY_SHOP),		/* Services  */
+	KEY(1, 1, KEY_PHONE),		/* VoiceMail */
+
+	KEY(0, 1, KEY_DELETE),		/* Delete    */
+	KEY(2, 2, KEY_PLAY),		/* Play      */
+	KEY(1, 0, KEY_PAGEUP),		/* Up        */
+	KEY(1, 3, KEY_PAGEDOWN),	/* Down      */
+	KEY(2, 0, KEY_EMAIL),		/* ReadEmail */
+	KEY(2, 1, KEY_STOP),		/* Stop      */
+
+	/* Numeric keypad portion */
+	KEY(0, 7, KEY_KP1),
+	KEY(0, 6, KEY_KP2),
+	KEY(0, 5, KEY_KP3),
+	KEY(1, 7, KEY_KP4),
+	KEY(1, 6, KEY_KP5),
+	KEY(1, 5, KEY_KP6),
+	KEY(2, 7, KEY_KP7),
+	KEY(2, 6, KEY_KP8),
+	KEY(2, 5, KEY_KP9),
+	KEY(3, 6, KEY_KP0),
+	KEY(3, 7, KEY_KPASTERISK),
+	KEY(3, 5, KEY_KPDOT),		/* # key     */
+	KEY(7, 2, KEY_NUMLOCK),		/* Mute      */
+	KEY(7, 1, KEY_KPMINUS),		/* Recall    */
+	KEY(6, 1, KEY_KPPLUS),		/* Redial    */
+	KEY(7, 6, KEY_KPSLASH),		/* Handsfree */
+	KEY(6, 0, KEY_ENTER),		/* Video     */
+
+	KEY(7, 4, KEY_CAMERA),		/* Photo     */
+
+	KEY(0, 4, KEY_F2),		/* Home      */
+	KEY(1, 4, KEY_F3),		/* Office    */
+	KEY(2, 4, KEY_F4),		/* Mobile    */
+	KEY(7, 7, KEY_F5),		/* SMS       */
+	KEY(7, 5, KEY_F6),		/* Email     */
+
+	/* QWERTY portion of keypad */
+	KEY(3, 4, KEY_Q),
+	KEY(3, 3, KEY_W),
+	KEY(3, 2, KEY_E),
+	KEY(3, 1, KEY_R),
+	KEY(3, 0, KEY_T),
+	KEY(4, 7, KEY_Y),
+	KEY(4, 6, KEY_U),
+	KEY(4, 5, KEY_I),
+	KEY(4, 4, KEY_O),
+	KEY(4, 3, KEY_P),
+
+	KEY(4, 2, KEY_A),
+	KEY(4, 1, KEY_S),
+	KEY(4, 0, KEY_D),
+	KEY(5, 7, KEY_F),
+	KEY(5, 6, KEY_G),
+	KEY(5, 5, KEY_H),
+	KEY(5, 4, KEY_J),
+	KEY(5, 3, KEY_K),
+	KEY(5, 2, KEY_L),
+
+	KEY(5, 1, KEY_Z),
+	KEY(5, 0, KEY_X),
+	KEY(6, 7, KEY_C),
+	KEY(6, 6, KEY_V),
+	KEY(6, 5, KEY_B),
+	KEY(6, 4, KEY_N),
+	KEY(6, 3, KEY_M),
+	KEY(6, 2, KEY_SPACE),
+
+	KEY(7, 0, KEY_LEFTSHIFT),	/* Vol up    */
+	KEY(7, 3, KEY_LEFTCTRL),	/* Vol down  */
+};
+
+#define LATCH1_PHYS	0x01000000
+#define LATCH1_VIRT	0xEA000000
+#define MODEM_PHYS	0x04000000
+#define MODEM_VIRT	0xEB000000
+#define LATCH2_PHYS	0x08000000
+#define LATCH2_VIRT	0xEC000000
+
+static struct map_desc ams_delta_io_desc[] __initdata = {
+	/* AMS_DELTA_LATCH1 */
+	{
+		.virtual	= LATCH1_VIRT,
+		.pfn		= __phys_to_pfn(LATCH1_PHYS),
+		.length		= 0x01000000,
+		.type		= MT_DEVICE
+	},
+	/* AMS_DELTA_LATCH2 */
+	{
+		.virtual	= LATCH2_VIRT,
+		.pfn		= __phys_to_pfn(LATCH2_PHYS),
+		.length		= 0x01000000,
+		.type		= MT_DEVICE
+	},
+	/* AMS_DELTA_MODEM */
+	{
+		.virtual	= MODEM_VIRT,
+		.pfn		= __phys_to_pfn(MODEM_PHYS),
+		.length		= 0x01000000,
+		.type		= MT_DEVICE
+	}
+};
+
+static struct omap_lcd_config ams_delta_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_usb_config ams_delta_usb_config __initdata = {
+	.register_host	= 1,
+	.hmc_mode	= 16,
+	.pins[0]	= 2,
+};
+
+#define LATCH1_GPIO_BASE	232
+#define LATCH1_NGPIO		8
+
+static struct resource latch1_resources[] = {
+	[0] = {
+		.name	= "dat",
+		.start	= LATCH1_PHYS,
+		.end	= LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct bgpio_pdata latch1_pdata = {
+	.base	= LATCH1_GPIO_BASE,
+	.ngpio	= LATCH1_NGPIO,
+};
+
+static struct platform_device latch1_gpio_device = {
+	.name		= "basic-mmio-gpio",
+	.id		= 0,
+	.resource	= latch1_resources,
+	.num_resources	= ARRAY_SIZE(latch1_resources),
+	.dev		= {
+		.platform_data	= &latch1_pdata,
+	},
+};
+
+static struct resource latch2_resources[] = {
+	[0] = {
+		.name	= "dat",
+		.start	= LATCH2_PHYS,
+		.end	= LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct bgpio_pdata latch2_pdata = {
+	.base	= AMS_DELTA_LATCH2_GPIO_BASE,
+	.ngpio	= AMS_DELTA_LATCH2_NGPIO,
+};
+
+static struct platform_device latch2_gpio_device = {
+	.name		= "basic-mmio-gpio",
+	.id		= 1,
+	.resource	= latch2_resources,
+	.num_resources	= ARRAY_SIZE(latch2_resources),
+	.dev		= {
+		.platform_data	= &latch2_pdata,
+	},
+};
+
+static const struct gpio latch_gpios[] __initconst = {
+	{
+		.gpio	= LATCH1_GPIO_BASE + 6,
+		.flags	= GPIOF_OUT_INIT_LOW,
+		.label	= "dockit1",
+	},
+	{
+		.gpio	= LATCH1_GPIO_BASE + 7,
+		.flags	= GPIOF_OUT_INIT_LOW,
+		.label	= "dockit2",
+	},
+	{
+		.gpio	= AMS_DELTA_GPIO_PIN_SCARD_RSTIN,
+		.flags	= GPIOF_OUT_INIT_LOW,
+		.label	= "scard_rstin",
+	},
+	{
+		.gpio	= AMS_DELTA_GPIO_PIN_SCARD_CMDVCC,
+		.flags	= GPIOF_OUT_INIT_LOW,
+		.label	= "scard_cmdvcc",
+	},
+	{
+		.gpio	= AMS_DELTA_GPIO_PIN_MODEM_CODEC,
+		.flags	= GPIOF_OUT_INIT_LOW,
+		.label	= "modem_codec",
+	},
+	{
+		.gpio	= AMS_DELTA_LATCH2_GPIO_BASE + 14,
+		.flags	= GPIOF_OUT_INIT_LOW,
+		.label	= "hookflash1",
+	},
+	{
+		.gpio	= AMS_DELTA_LATCH2_GPIO_BASE + 15,
+		.flags	= GPIOF_OUT_INIT_LOW,
+		.label	= "hookflash2",
+	},
+};
+
+static struct regulator_consumer_supply modem_nreset_consumers[] = {
+	REGULATOR_SUPPLY("RESET#", "serial8250.1"),
+	REGULATOR_SUPPLY("POR", "cx20442-codec"),
+};
+
+static struct regulator_init_data modem_nreset_data = {
+	.constraints		= {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+		.boot_on		= 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(modem_nreset_consumers),
+	.consumer_supplies	= modem_nreset_consumers,
+};
+
+static struct fixed_voltage_config modem_nreset_config = {
+	.supply_name		= "modem_nreset",
+	.microvolts		= 3300000,
+	.gpio			= AMS_DELTA_GPIO_PIN_MODEM_NRESET,
+	.startup_delay		= 25000,
+	.enable_high		= 1,
+	.enabled_at_boot	= 1,
+	.init_data		= &modem_nreset_data,
+};
+
+static struct platform_device modem_nreset_device = {
+	.name	= "reg-fixed-voltage",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &modem_nreset_config,
+	},
+};
+
+struct modem_private_data {
+	struct regulator *regulator;
+};
+
+static struct modem_private_data modem_priv;
+
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value)
+{
+	int bit = 0;
+	u16 bitpos = 1 << bit;
+
+	for (; bit < ngpio; bit++, bitpos = bitpos << 1) {
+		if (!(mask & bitpos))
+			continue;
+		else
+			gpio_set_value(base + bit, (value & bitpos) != 0);
+	}
+}
+EXPORT_SYMBOL(ams_delta_latch_write);
+
+static struct resource ams_delta_nand_resources[] = {
+	[0] = {
+		.start	= OMAP1_MPUIO_BASE,
+		.end	= OMAP1_MPUIO_BASE +
+				OMAP_MPUIO_IO_CNTL + sizeof(u32) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ams_delta_nand_device = {
+	.name	= "ams-delta-nand",
+	.id	= -1,
+	.num_resources	= ARRAY_SIZE(ams_delta_nand_resources),
+	.resource	= ams_delta_nand_resources,
+};
+
+static struct resource ams_delta_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct matrix_keymap_data ams_delta_keymap_data = {
+	.keymap		= ams_delta_keymap,
+	.keymap_size	= ARRAY_SIZE(ams_delta_keymap),
+};
+
+static struct omap_kp_platform_data ams_delta_kp_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap_data	= &ams_delta_keymap_data,
+	.delay		= 9,
+};
+
+static struct platform_device ams_delta_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &ams_delta_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(ams_delta_kp_resources),
+	.resource	= ams_delta_kp_resources,
+};
+
+static struct platform_device ams_delta_lcd_device = {
+	.name	= "lcd_ams_delta",
+	.id	= -1,
+};
+
+static const struct gpio_led gpio_leds[] __initconst = {
+	{
+		.name		 = "camera",
+		.gpio		 = LATCH1_GPIO_BASE + 0,
+		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
+#ifdef CONFIG_LEDS_TRIGGERS
+		.default_trigger = "ams_delta_camera",
+#endif
+	},
+	{
+		.name		 = "advert",
+		.gpio		 = LATCH1_GPIO_BASE + 1,
+		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
+	},
+	{
+		.name		 = "email",
+		.gpio		 = LATCH1_GPIO_BASE + 2,
+		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
+	},
+	{
+		.name		 = "handsfree",
+		.gpio		 = LATCH1_GPIO_BASE + 3,
+		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
+	},
+	{
+		.name		 = "voicemail",
+		.gpio		 = LATCH1_GPIO_BASE + 4,
+		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
+	},
+	{
+		.name		 = "voice",
+		.gpio		 = LATCH1_GPIO_BASE + 5,
+		.default_state	 = LEDS_GPIO_DEFSTATE_OFF,
+	},
+};
+
+static const struct gpio_led_platform_data leds_pdata __initconst = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct i2c_board_info ams_delta_camera_board_info[] = {
+	{
+		I2C_BOARD_INFO("ov6650", 0x60),
+	},
+};
+
+#ifdef CONFIG_LEDS_TRIGGERS
+DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
+
+static int ams_delta_camera_power(struct device *dev, int power)
+{
+	/*
+	 * turn on camera LED
+	 */
+	if (power)
+		led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
+	else
+		led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
+	return 0;
+}
+#else
+#define ams_delta_camera_power	NULL
+#endif
+
+static struct soc_camera_link ams_delta_iclink = {
+	.bus_id         = 0,	/* OMAP1 SoC camera bus */
+	.i2c_adapter_id = 1,
+	.board_info     = &ams_delta_camera_board_info[0],
+	.module_name    = "ov6650",
+	.power		= ams_delta_camera_power,
+};
+
+static struct platform_device ams_delta_camera_device = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &ams_delta_iclink,
+	},
+};
+
+static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
+	.camexclk_khz	= 12000,	/* default 12MHz clock, no extra DPLL */
+	.lclk_khz_max	= 1334,		/* results in 5fps CIF, 10fps QCIF */
+};
+
+static struct platform_device ams_delta_audio_device = {
+	.name   = "ams-delta-audio",
+	.id     = -1,
+};
+
+static struct platform_device cx20442_codec_device = {
+	.name   = "cx20442-codec",
+	.id     = -1,
+};
+
+static struct platform_device *ams_delta_devices[] __initdata = {
+	&latch1_gpio_device,
+	&latch2_gpio_device,
+	&ams_delta_kp_device,
+	&ams_delta_camera_device,
+	&ams_delta_audio_device,
+};
+
+static struct platform_device *late_devices[] __initdata = {
+	&ams_delta_nand_device,
+	&ams_delta_lcd_device,
+	&cx20442_codec_device,
+};
+
+static void __init ams_delta_init(void)
+{
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+
+	/* parallel camera interface */
+	omap_cfg_reg(H19_1610_CAM_EXCLK);
+	omap_cfg_reg(J15_1610_CAM_LCLK);
+	omap_cfg_reg(L18_1610_CAM_VS);
+	omap_cfg_reg(L15_1610_CAM_HS);
+	omap_cfg_reg(L19_1610_CAM_D0);
+	omap_cfg_reg(K14_1610_CAM_D1);
+	omap_cfg_reg(K15_1610_CAM_D2);
+	omap_cfg_reg(K19_1610_CAM_D3);
+	omap_cfg_reg(K18_1610_CAM_D4);
+	omap_cfg_reg(J14_1610_CAM_D5);
+	omap_cfg_reg(J19_1610_CAM_D6);
+	omap_cfg_reg(J18_1610_CAM_D7);
+
+	omap_serial_init();
+	omap_register_i2c_bus(1, 100, NULL, 0);
+
+	omap1_usb_init(&ams_delta_usb_config);
+	omap1_set_camera_info(&ams_delta_camera_platform_data);
+#ifdef CONFIG_LEDS_TRIGGERS
+	led_trigger_register_simple("ams_delta_camera",
+			&ams_delta_camera_led_trigger);
+#endif
+	gpio_led_register_device(-1, &leds_pdata);
+	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
+
+	ams_delta_init_fiq();
+
+	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
+
+	omapfb_set_lcd_config(&ams_delta_lcd_config);
+}
+
+static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
+{
+	struct modem_private_data *priv = port->private_data;
+
+	if (IS_ERR(priv->regulator))
+		return;
+
+	if (state == old)
+		return;
+
+	if (state == 0)
+		regulator_enable(priv->regulator);
+	else if (old == 0)
+		regulator_disable(priv->regulator);
+}
+
+static struct plat_serial8250_port ams_delta_modem_ports[] = {
+	{
+		.membase	= IOMEM(MODEM_VIRT),
+		.mapbase	= MODEM_PHYS,
+		.irq		= -EINVAL, /* changed later */
+		.flags		= UPF_BOOT_AUTOCONF,
+		.irqflags	= IRQF_TRIGGER_RISING,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= BASE_BAUD * 16,
+		.pm		= modem_pm,
+		.private_data	= &modem_priv,
+	},
+	{ },
+};
+
+static struct platform_device ams_delta_modem_device = {
+	.name	= "serial8250",
+	.id	= PLAT8250_DEV_PLATFORM1,
+	.dev		= {
+		.platform_data = ams_delta_modem_ports,
+	},
+};
+
+static int __init late_init(void)
+{
+	int err;
+
+	if (!machine_is_ams_delta())
+		return -ENODEV;
+
+	err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios));
+	if (err) {
+		pr_err("Couldn't take over latch1/latch2 GPIO pins\n");
+		return err;
+	}
+
+	platform_add_devices(late_devices, ARRAY_SIZE(late_devices));
+
+	err = platform_device_register(&modem_nreset_device);
+	if (err) {
+		pr_err("Couldn't register the modem regulator device\n");
+		return err;
+	}
+
+	omap_cfg_reg(M14_1510_GPIO2);
+	ams_delta_modem_ports[0].irq =
+			gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+
+	err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem");
+	if (err) {
+		pr_err("Couldn't request gpio pin for modem\n");
+		return err;
+	}
+	gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+
+	/* Initialize the modem_nreset regulator consumer before use */
+	modem_priv.regulator = ERR_PTR(-ENODEV);
+
+	ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
+			AMS_DELTA_LATCH2_MODEM_CODEC);
+
+	err = platform_device_register(&ams_delta_modem_device);
+	if (err)
+		goto gpio_free;
+
+	/*
+	 * Once the modem device is registered, the modem_nreset
+	 * regulator can be requested on behalf of that device.
+	 */
+	modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev,
+			"RESET#");
+	if (IS_ERR(modem_priv.regulator)) {
+		err = PTR_ERR(modem_priv.regulator);
+		goto unregister;
+	}
+	return 0;
+
+unregister:
+	platform_device_unregister(&ams_delta_modem_device);
+gpio_free:
+	gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+	return err;
+}
+
+static void __init ams_delta_init_late(void)
+{
+	omap1_init_late();
+	late_init();
+}
+
+static void __init ams_delta_map_io(void)
+{
+	omap15xx_map_io();
+	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
+}
+
+MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
+	/* Maintainer: Jonathan McDowell <noodles@earth.li> */
+	.atag_offset	= 0x100,
+	.map_io		= ams_delta_map_io,
+	.init_early	= omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= ams_delta_init,
+	.init_late	= ams_delta_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
new file mode 100644
index 000000000..702d58039
--- /dev/null
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -0,0 +1,369 @@
+/*
+ * linux/arch/arm/mach-omap1/board-fsample.c
+ *
+ * Modified from board-perseus2.c
+ *
+ * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
+ * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/smc91x.h>
+#include <linux/omapfb.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/tc.h>
+#include <mach/mux.h>
+#include <mach/flash.h>
+#include <linux/platform_data/keypad-omap.h>
+
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+#include "fpga.h"
+
+/* fsample is pretty close to p2-sample */
+
+#define fsample_cpld_read(reg) __raw_readb(reg)
+#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
+
+#define FSAMPLE_CPLD_BASE    0xE8100000
+#define FSAMPLE_CPLD_SIZE    SZ_4K
+#define FSAMPLE_CPLD_START   0x05080000
+
+#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
+#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
+#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
+#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
+
+#define FSAMPLE_CPLD_BIT_BT_RESET         0
+#define FSAMPLE_CPLD_BIT_LCD_RESET        1
+#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
+#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
+#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
+#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
+#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
+#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
+#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
+#define FSAMPLE_CPLD_BIT_OTG_RESET        9
+
+#define fsample_cpld_set(bit) \
+    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
+
+#define fsample_cpld_clear(bit) \
+    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
+
+static const unsigned int fsample_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(2, 0, KEY_LEFT),
+	KEY(3, 0, KEY_DOWN),
+	KEY(4, 0, KEY_ENTER),
+	KEY(0, 1, KEY_F10),
+	KEY(1, 1, KEY_SEND),
+	KEY(2, 1, KEY_END),
+	KEY(3, 1, KEY_VOLUMEDOWN),
+	KEY(4, 1, KEY_VOLUMEUP),
+	KEY(5, 1, KEY_RECORD),
+	KEY(0, 2, KEY_F9),
+	KEY(1, 2, KEY_3),
+	KEY(2, 2, KEY_6),
+	KEY(3, 2, KEY_9),
+	KEY(4, 2, KEY_KPDOT),
+	KEY(0, 3, KEY_BACK),
+	KEY(1, 3, KEY_2),
+	KEY(2, 3, KEY_5),
+	KEY(3, 3, KEY_8),
+	KEY(4, 3, KEY_0),
+	KEY(5, 3, KEY_KPSLASH),
+	KEY(0, 4, KEY_HOME),
+	KEY(1, 4, KEY_1),
+	KEY(2, 4, KEY_4),
+	KEY(3, 4, KEY_7),
+	KEY(4, 4, KEY_KPASTERISK),
+	KEY(5, 4, KEY_POWER),
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
+		.end	= H2P2_DBG_FPGA_ETHR_START + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= INT_7XX_MPU_EXT_NIRQ,
+		.end	= 0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static void __init fsample_init_smc91x(void)
+{
+	__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+	__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+		   H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+}
+
+static struct mtd_partition nor_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	},
+	/* kernel */
+	{
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	},
+	/* rest of flash is a file system */
+	{
+	      .name		= "rootfs",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	},
+};
+
+static struct physmap_flash_data nor_data = {
+	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
+	.parts		= nor_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_partitions),
+};
+
+static struct resource nor_resource = {
+	.start		= OMAP_CS0_PHYS,
+	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device nor_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &nor_data,
+	},
+	.num_resources	= 1,
+	.resource	= &nor_resource,
+};
+
+#define FSAMPLE_NAND_RB_GPIO_PIN	62
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN);
+}
+
+static struct platform_nand_data nand_data = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.options		= NAND_SAMSUNG_LP_OPTIONS,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= omap1_nand_cmd_ctl,
+		.dev_ready	= nand_dev_ready,
+	},
+};
+
+static struct resource nand_resource = {
+	.start		= OMAP_CS3_PHYS,
+	.end		= OMAP_CS3_PHYS + SZ_4K - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device nand_device = {
+	.name		= "gen_nand",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &nand_resource,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct resource kp_resources[] = {
+	[0] = {
+		.start	= INT_7XX_MPUIO_KEYPAD,
+		.end	= INT_7XX_MPUIO_KEYPAD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct matrix_keymap_data fsample_keymap_data = {
+	.keymap		= fsample_keymap,
+	.keymap_size	= ARRAY_SIZE(fsample_keymap),
+};
+
+static struct omap_kp_platform_data kp_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap_data	= &fsample_keymap_data,
+	.delay		= 4,
+};
+
+static struct platform_device kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(kp_resources),
+	.resource	= kp_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&nor_device,
+	&nand_device,
+	&smc91x_device,
+	&kp_device,
+};
+
+static struct omap_lcd_config fsample_lcd_config = {
+	.ctrl_name	= "internal",
+};
+
+static void __init omap_fsample_init(void)
+{
+	/* Early, board-dependent init */
+
+	/*
+	 * Hold GSM Reset until needed
+	 */
+	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
+
+	/*
+	 * UARTs -> done automagically by 8250 driver
+	 */
+
+	/*
+	 * CSx timings, GPIO Mux ... setup
+	 */
+
+	/* Flash: CS0 timings setup */
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
+
+	/*
+	 * Ethernet support through the debug board
+	 * CS1 timings setup
+	 */
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
+
+	/*
+	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+	 * It is used as the Ethernet controller interrupt
+	 */
+	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
+			OMAP7XX_IO_CONF_9);
+
+	fsample_init_smc91x();
+
+	BUG_ON(gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0);
+	gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
+
+	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
+	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
+
+	/* Mux pins for keypad */
+	omap_cfg_reg(E2_7XX_KBR0);
+	omap_cfg_reg(J7_7XX_KBR1);
+	omap_cfg_reg(E1_7XX_KBR2);
+	omap_cfg_reg(F3_7XX_KBR3);
+	omap_cfg_reg(D2_7XX_KBR4);
+	omap_cfg_reg(C2_7XX_KBC0);
+	omap_cfg_reg(D3_7XX_KBC1);
+	omap_cfg_reg(E4_7XX_KBC2);
+	omap_cfg_reg(F4_7XX_KBC3);
+	omap_cfg_reg(E3_7XX_KBC4);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	omap_serial_init();
+	omap_register_i2c_bus(1, 100, NULL, 0);
+
+	omapfb_set_lcd_config(&fsample_lcd_config);
+}
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc omap_fsample_io_desc[] __initdata = {
+	{
+		.virtual	= H2P2_DBG_FPGA_BASE,
+		.pfn		= __phys_to_pfn(H2P2_DBG_FPGA_START),
+		.length		= H2P2_DBG_FPGA_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= FSAMPLE_CPLD_BASE,
+		.pfn		= __phys_to_pfn(FSAMPLE_CPLD_START),
+		.length		= FSAMPLE_CPLD_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init omap_fsample_map_io(void)
+{
+	omap15xx_map_io();
+	iotable_init(omap_fsample_io_desc,
+		     ARRAY_SIZE(omap_fsample_io_desc));
+}
+
+MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
+/* Maintainer: Brian Swetland <swetland@google.com> */
+	.atag_offset	= 0x100,
+	.map_io		= omap_fsample_map_io,
+	.init_early	= omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= omap_fsample_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
new file mode 100644
index 000000000..e1d917177
--- /dev/null
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -0,0 +1,89 @@
+/*
+ * linux/arch/arm/mach-omap1/board-generic.c
+ *
+ * Modified from board-innovator1510.c
+ *
+ * Code for generic OMAP board. Should work on many OMAP systems where
+ * the device drivers take care of all the necessary hardware initialization.
+ * Do not put any board specific code to this file; create a new machine
+ * type if you need custom low-level initializations.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/mux.h>
+
+#include <mach/usb.h>
+
+#include "common.h"
+
+/* assume no Mini-AB port */
+
+#ifdef CONFIG_ARCH_OMAP15XX
+static struct omap_usb_config generic1510_usb_config __initdata = {
+	.register_host	= 1,
+	.register_dev	= 1,
+	.hmc_mode	= 16,
+	.pins[0]	= 3,
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+static struct omap_usb_config generic1610_usb_config __initdata = {
+#ifdef CONFIG_USB_OTG
+	.otg		= 1,
+#endif
+	.register_host	= 1,
+	.register_dev	= 1,
+	.hmc_mode	= 16,
+	.pins[0]	= 6,
+};
+#endif
+
+static void __init omap_generic_init(void)
+{
+#ifdef CONFIG_ARCH_OMAP15XX
+	if (cpu_is_omap15xx()) {
+		/* mux pins for uarts */
+		omap_cfg_reg(UART1_TX);
+		omap_cfg_reg(UART1_RTS);
+		omap_cfg_reg(UART2_TX);
+		omap_cfg_reg(UART2_RTS);
+		omap_cfg_reg(UART3_TX);
+		omap_cfg_reg(UART3_RX);
+
+		omap1_usb_init(&generic1510_usb_config);
+	}
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+	if (!cpu_is_omap1510()) {
+		omap1_usb_init(&generic1610_usb_config);
+	}
+#endif
+
+	omap_serial_init();
+	omap_register_i2c_bus(1, 100, NULL, 0);
+}
+
+MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
+	/* Maintainer: Tony Lindgren <tony@atomide.com> */
+	.atag_offset	= 0x100,
+	.map_io		= omap16xx_map_io,
+	.init_early	= omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= omap_generic_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
new file mode 100644
index 000000000..7119ef28e
--- /dev/null
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -0,0 +1,77 @@
+/*
+ * linux/arch/arm/mach-omap1/board-h2-mmc.c
+ *
+ * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
+ * Author: Felipe Balbi <felipe.lima@indt.org.br>
+ *
+ * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/i2c/tps65010.h>
+
+#include "board-h2.h"
+#include "mmc.h"
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static int mmc_set_power(struct device *dev, int slot, int power_on,
+				int vdd)
+{
+	gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on);
+	return 0;
+}
+
+static int mmc_late_init(struct device *dev)
+{
+	int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
+	if (ret < 0)
+		return ret;
+
+	gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
+
+	return ret;
+}
+
+static void mmc_cleanup(struct device *dev)
+{
+	gpio_free(H2_TPS_GPIO_MMC_PWR_EN);
+}
+
+/*
+ * H2 could use the following functions tested:
+ * - mmc_get_cover_state that uses OMAP_MPUIO(1)
+ * - mmc_get_wp that uses OMAP_MPUIO(3)
+ */
+static struct omap_mmc_platform_data mmc1_data = {
+	.nr_slots                       = 1,
+	.init				= mmc_late_init,
+	.cleanup			= mmc_cleanup,
+	.slots[0]       = {
+		.set_power              = mmc_set_power,
+		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
+		.name                   = "mmcblk",
+	},
+};
+
+static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
+
+void __init h2_mmc_init(void)
+{
+	mmc_data[0] = &mmc1_data;
+	omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
+}
+
+#else
+
+void __init h2_mmc_init(void)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
new file mode 100644
index 000000000..5b45d266d
--- /dev/null
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -0,0 +1,433 @@
+/*
+ * linux/arch/arm/mach-omap1/board-h2.c
+ *
+ * Board specific inits for OMAP-1610 H2
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * H2 specific changes and cleanup
+ * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/i2c/tps65010.h>
+#include <linux/smc91x.h>
+#include <linux/omapfb.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/leds.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/mux.h>
+#include <linux/omap-dma.h>
+#include <mach/tc.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/usb.h>
+
+#include "common.h"
+#include "board-h2.h"
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define OMAP1610_ETHR_START		0x04000300
+
+static const unsigned int h2_keymap[] = {
+	KEY(0, 0, KEY_LEFT),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(2, 0, KEY_3),
+	KEY(3, 0, KEY_F10),
+	KEY(4, 0, KEY_F5),
+	KEY(5, 0, KEY_9),
+	KEY(0, 1, KEY_DOWN),
+	KEY(1, 1, KEY_UP),
+	KEY(2, 1, KEY_2),
+	KEY(3, 1, KEY_F9),
+	KEY(4, 1, KEY_F7),
+	KEY(5, 1, KEY_0),
+	KEY(0, 2, KEY_ENTER),
+	KEY(1, 2, KEY_6),
+	KEY(2, 2, KEY_1),
+	KEY(3, 2, KEY_F2),
+	KEY(4, 2, KEY_F6),
+	KEY(5, 2, KEY_HOME),
+	KEY(0, 3, KEY_8),
+	KEY(1, 3, KEY_5),
+	KEY(2, 3, KEY_F12),
+	KEY(3, 3, KEY_F3),
+	KEY(4, 3, KEY_F8),
+	KEY(5, 3, KEY_END),
+	KEY(0, 4, KEY_7),
+	KEY(1, 4, KEY_4),
+	KEY(2, 4, KEY_F11),
+	KEY(3, 4, KEY_F1),
+	KEY(4, 4, KEY_F4),
+	KEY(5, 4, KEY_ESC),
+	KEY(0, 5, KEY_F13),
+	KEY(1, 5, KEY_F14),
+	KEY(2, 5, KEY_F15),
+	KEY(3, 5, KEY_F16),
+	KEY(4, 5, KEY_SLEEP),
+};
+
+static struct mtd_partition h2_nor_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	},
+	/* kernel */
+	{
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	},
+	/* file system */
+	{
+	      .name		= "filesystem",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data h2_nor_data = {
+	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
+	.parts		= h2_nor_partitions,
+	.nr_parts	= ARRAY_SIZE(h2_nor_partitions),
+};
+
+static struct resource h2_nor_resource = {
+	/* This is on CS3, wherever it's mapped */
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device h2_nor_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &h2_nor_data,
+	},
+	.num_resources	= 1,
+	.resource	= &h2_nor_resource,
+};
+
+static struct mtd_partition h2_nand_partitions[] = {
+#if 0
+	/* REVISIT:  enable these partitions if you make NAND BOOT
+	 * work on your H2 (rev C or newer); published versions of
+	 * x-load only support P2 and H3.
+	 */
+	{
+		.name		= "xloader",
+		.offset		= 0,
+		.size		= 64 * 1024,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "bootloader",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 256 * 1024,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 192 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * SZ_1M,
+	},
+#endif
+	{
+		.name		= "filesystem",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,
+	},
+};
+
+#define H2_NAND_RB_GPIO_PIN	62
+
+static int h2_nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
+}
+
+static struct platform_nand_data h2_nand_platdata = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.nr_partitions		= ARRAY_SIZE(h2_nand_partitions),
+		.partitions		= h2_nand_partitions,
+		.options		= NAND_SAMSUNG_LP_OPTIONS,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= omap1_nand_cmd_ctl,
+		.dev_ready	= h2_nand_dev_ready,
+	},
+};
+
+static struct resource h2_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device h2_nand_device = {
+	.name		= "gen_nand",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &h2_nand_platdata,
+	},
+	.num_resources	= 1,
+	.resource	= &h2_nand_resource,
+};
+
+static struct smc91x_platdata h2_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
+static struct resource h2_smc91x_resources[] = {
+	[0] = {
+		.start	= OMAP1610_ETHR_START,		/* Physical */
+		.end	= OMAP1610_ETHR_START + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device h2_smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &h2_smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(h2_smc91x_resources),
+	.resource	= h2_smc91x_resources,
+};
+
+static struct resource h2_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct matrix_keymap_data h2_keymap_data = {
+	.keymap		= h2_keymap,
+	.keymap_size	= ARRAY_SIZE(h2_keymap),
+};
+
+static struct omap_kp_platform_data h2_kp_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap_data	= &h2_keymap_data,
+	.rep		= true,
+	.delay		= 9,
+	.dbounce	= true,
+};
+
+static struct platform_device h2_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &h2_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(h2_kp_resources),
+	.resource	= h2_kp_resources,
+};
+
+static struct gpio_led h2_gpio_led_pins[] = {
+	{
+		.name		= "h2:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "h2:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data h2_gpio_led_data = {
+	.leds		= h2_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(h2_gpio_led_pins),
+};
+
+static struct platform_device h2_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &h2_gpio_led_data,
+	},
+};
+
+static struct platform_device *h2_devices[] __initdata = {
+	&h2_nor_device,
+	&h2_nand_device,
+	&h2_smc91x_device,
+	&h2_kp_device,
+	&h2_gpio_leds,
+};
+
+static void __init h2_init_smc91x(void)
+{
+	if (gpio_request(0, "SMC91x irq") < 0) {
+		printk("Error requesting gpio 0 for smc91x irq\n");
+		return;
+	}
+}
+
+static int tps_setup(struct i2c_client *client, void *context)
+{
+	if (!IS_BUILTIN(CONFIG_TPS65010))
+		return -ENOSYS;
+	
+	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V |
+				TPS_LDO1_ENABLE | TPS_VLDO1_3_0V);
+
+	return 0;
+}
+
+static struct tps65010_board tps_board = {
+	.base		= H2_TPS_GPIO_BASE,
+	.outmask	= 0x0f,
+	.setup		= tps_setup,
+};
+
+static struct i2c_board_info __initdata h2_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("tps65010", 0x48),
+		.platform_data	= &tps_board,
+	}, {
+		I2C_BOARD_INFO("isp1301_omap", 0x2d),
+	},
+};
+
+static struct omap_usb_config h2_usb_config __initdata = {
+	/* usb1 has a Mini-AB port and external isp1301 transceiver */
+	.otg		= 2,
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
+	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
+#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
+	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
+#endif
+
+	.pins[1]	= 3,
+};
+
+static struct omap_lcd_config h2_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static void __init h2_init(void)
+{
+	h2_init_smc91x();
+
+	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
+	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
+	 * notice whether a NAND chip is enabled at probe time.
+	 *
+	 * FIXME revC boards (and H3) support NAND-boot, with a dip switch to
+	 * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3.  Try
+	 * detecting that in code here, to avoid probing every possible flash
+	 * configuration...
+	 */
+	h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
+	h2_nor_resource.end += SZ_32M - 1;
+
+	h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS;
+	h2_nand_resource.end += SZ_4K - 1;
+	BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
+	gpio_direction_input(H2_NAND_RB_GPIO_PIN);
+
+	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
+	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
+
+	/* MMC:  card detect and WP */
+	/* omap_cfg_reg(U19_ARMIO1); */		/* CD */
+	omap_cfg_reg(BALLOUT_V8_ARMIO3);	/* WP */
+
+	/* Mux pins for keypad */
+	omap_cfg_reg(F18_1610_KBC0);
+	omap_cfg_reg(D20_1610_KBC1);
+	omap_cfg_reg(D19_1610_KBC2);
+	omap_cfg_reg(E18_1610_KBC3);
+	omap_cfg_reg(C21_1610_KBC4);
+	omap_cfg_reg(G18_1610_KBR0);
+	omap_cfg_reg(F19_1610_KBR1);
+	omap_cfg_reg(H14_1610_KBR2);
+	omap_cfg_reg(E20_1610_KBR3);
+	omap_cfg_reg(E19_1610_KBR4);
+	omap_cfg_reg(N19_1610_KBR5);
+
+	/* GPIO based LEDs */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
+	h2_smc91x_resources[1].start = gpio_to_irq(0);
+	h2_smc91x_resources[1].end = gpio_to_irq(0);
+	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
+	omap_serial_init();
+	h2_i2c_board_info[0].irq = gpio_to_irq(58);
+	h2_i2c_board_info[1].irq = gpio_to_irq(2);
+	omap_register_i2c_bus(1, 100, h2_i2c_board_info,
+			      ARRAY_SIZE(h2_i2c_board_info));
+	omap1_usb_init(&h2_usb_config);
+	h2_mmc_init();
+
+	omapfb_set_lcd_config(&h2_lcd_config);
+}
+
+MACHINE_START(OMAP_H2, "TI-H2")
+	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
+	.atag_offset	= 0x100,
+	.map_io		= omap16xx_map_io,
+	.init_early     = omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= h2_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.h b/arch/arm/mach-omap1/board-h2.h
new file mode 100644
index 000000000..315e26625
--- /dev/null
+++ b/arch/arm/mach-omap1/board-h2.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-omap1/board-h2.h
+ *
+ * Hardware definitions for TI OMAP1610 H2 board.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_H2_H
+#define __ASM_ARCH_OMAP_H2_H
+
+#define H2_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define H2_TPS_GPIO_MMC_PWR_EN	(H2_TPS_GPIO_BASE + 3)
+
+extern void h2_mmc_init(void);
+
+#endif /*  __ASM_ARCH_OMAP_H2_H */
+
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
new file mode 100644
index 000000000..17d77914d
--- /dev/null
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -0,0 +1,66 @@
+/*
+ * linux/arch/arm/mach-omap1/board-h3-mmc.c
+ *
+ * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
+ * Author: Felipe Balbi <felipe.lima@indt.org.br>
+ *
+ * This code is based on linux/arch/arm/mach-omap2/board-n800-mmc.c, which is:
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <linux/i2c/tps65010.h>
+
+#include "board-h3.h"
+#include "mmc.h"
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static int mmc_set_power(struct device *dev, int slot, int power_on,
+				int vdd)
+{
+	gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on);
+	return 0;
+}
+
+/*
+ * H3 could use the following functions tested:
+ * - mmc_get_cover_state that uses OMAP_MPUIO(1)
+ * - mmc_get_wp that maybe uses OMAP_MPUIO(3)
+ */
+static struct omap_mmc_platform_data mmc1_data = {
+	.nr_slots                       = 1,
+	.slots[0]       = {
+		.set_power              = mmc_set_power,
+		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
+		.name                   = "mmcblk",
+	},
+};
+
+static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
+
+void __init h3_mmc_init(void)
+{
+	int ret;
+
+	ret = gpio_request(H3_TPS_GPIO_MMC_PWR_EN, "MMC power");
+	if (ret < 0)
+		return;
+	gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
+
+	mmc_data[0] = &mmc1_data;
+	omap1_init_mmc(mmc_data, OMAP16XX_NR_MMC);
+}
+
+#else
+
+void __init h3_mmc_init(void)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
new file mode 100644
index 000000000..bfed4f928
--- /dev/null
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -0,0 +1,459 @@
+/*
+ * linux/arch/arm/mach-omap1/board-h3.c
+ *
+ * This file contains OMAP1710 H3 specific code.
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ *         Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/major.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+#include <linux/workqueue.h>
+#include <linux/i2c.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c/tps65010.h>
+#include <linux/smc91x.h>
+#include <linux/omapfb.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/leds.h>
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <linux/platform_data/keypad-omap.h>
+#include <linux/omap-dma.h>
+#include <mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/usb.h>
+
+#include "common.h"
+#include "board-h3.h"
+
+/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
+#define OMAP1710_ETHR_START		0x04000300
+
+#define H3_TS_GPIO	48
+
+static const unsigned int h3_keymap[] = {
+	KEY(0, 0, KEY_LEFT),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(2, 0, KEY_3),
+	KEY(3, 0, KEY_F10),
+	KEY(4, 0, KEY_F5),
+	KEY(5, 0, KEY_9),
+	KEY(0, 1, KEY_DOWN),
+	KEY(1, 1, KEY_UP),
+	KEY(2, 1, KEY_2),
+	KEY(3, 1, KEY_F9),
+	KEY(4, 1, KEY_F7),
+	KEY(5, 1, KEY_0),
+	KEY(0, 2, KEY_ENTER),
+	KEY(1, 2, KEY_6),
+	KEY(2, 2, KEY_1),
+	KEY(3, 2, KEY_F2),
+	KEY(4, 2, KEY_F6),
+	KEY(5, 2, KEY_HOME),
+	KEY(0, 3, KEY_8),
+	KEY(1, 3, KEY_5),
+	KEY(2, 3, KEY_F12),
+	KEY(3, 3, KEY_F3),
+	KEY(4, 3, KEY_F8),
+	KEY(5, 3, KEY_END),
+	KEY(0, 4, KEY_7),
+	KEY(1, 4, KEY_4),
+	KEY(2, 4, KEY_F11),
+	KEY(3, 4, KEY_F1),
+	KEY(4, 4, KEY_F4),
+	KEY(5, 4, KEY_ESC),
+	KEY(0, 5, KEY_F13),
+	KEY(1, 5, KEY_F14),
+	KEY(2, 5, KEY_F15),
+	KEY(3, 5, KEY_F16),
+	KEY(4, 5, KEY_SLEEP),
+};
+
+
+static struct mtd_partition nor_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	},
+	/* kernel */
+	{
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	},
+	/* file system */
+	{
+	      .name		= "filesystem",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data nor_data = {
+	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
+	.parts		= nor_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_partitions),
+};
+
+static struct resource nor_resource = {
+	/* This is on CS3, wherever it's mapped */
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device nor_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &nor_data,
+	},
+	.num_resources	= 1,
+	.resource	= &nor_resource,
+};
+
+static struct mtd_partition nand_partitions[] = {
+#if 0
+	/* REVISIT: enable these partitions if you make NAND BOOT work */
+	{
+		.name		= "xloader",
+		.offset		= 0,
+		.size		= 64 * 1024,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "bootloader",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 256 * 1024,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 192 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 2 * SZ_1M,
+	},
+#endif
+	{
+		.name		= "filesystem",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,
+	},
+};
+
+#define H3_NAND_RB_GPIO_PIN	10
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(H3_NAND_RB_GPIO_PIN);
+}
+
+static struct platform_nand_data nand_platdata = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.nr_partitions		= ARRAY_SIZE(nand_partitions),
+		.partitions		= nand_partitions,
+		.options		= NAND_SAMSUNG_LP_OPTIONS,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= omap1_nand_cmd_ctl,
+		.dev_ready	= nand_dev_ready,
+
+	},
+};
+
+static struct resource nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device nand_device = {
+	.name		= "gen_nand",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &nand_platdata,
+	},
+	.num_resources	= 1,
+	.resource	= &nand_resource,
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= OMAP1710_ETHR_START,		/* Physical */
+		.end	= OMAP1710_ETHR_START + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static void __init h3_init_smc91x(void)
+{
+	omap_cfg_reg(W15_1710_GPIO40);
+	if (gpio_request(40, "SMC91x irq") < 0) {
+		printk("Error requesting gpio 40 for smc91x irq\n");
+		return;
+	}
+}
+
+#define GPTIMER_BASE		0xFFFB1400
+#define GPTIMER_REGS(x)	(0xFFFB1400 + (x * 0x800))
+#define GPTIMER_REGS_SIZE	0x46
+
+static struct resource intlat_resources[] = {
+	[0] = {
+		.start  = GPTIMER_REGS(0),	      /* Physical */
+		.end    = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = INT_1610_GPTIMER1,
+		.end    = INT_1610_GPTIMER1,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device intlat_device = {
+	.name	   = "omap_intlat",
+	.id	     = 0,
+	.num_resources  = ARRAY_SIZE(intlat_resources),
+	.resource       = intlat_resources,
+};
+
+static struct resource h3_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct matrix_keymap_data h3_keymap_data = {
+	.keymap		= h3_keymap,
+	.keymap_size	= ARRAY_SIZE(h3_keymap),
+};
+
+static struct omap_kp_platform_data h3_kp_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap_data	= &h3_keymap_data,
+	.rep		= true,
+	.delay		= 9,
+	.dbounce	= true,
+};
+
+static struct platform_device h3_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &h3_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(h3_kp_resources),
+	.resource	= h3_kp_resources,
+};
+
+static struct platform_device h3_lcd_device = {
+	.name		= "lcd_h3",
+	.id		= -1,
+};
+
+static struct spi_board_info h3_spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "tsc2101",
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.max_speed_hz	= 16000000,
+		/* .platform_data	= &tsc_platform_data, */
+	},
+};
+
+static struct gpio_led h3_gpio_led_pins[] = {
+	{
+		.name		= "h3:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "h3:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data h3_gpio_led_data = {
+	.leds		= h3_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(h3_gpio_led_pins),
+};
+
+static struct platform_device h3_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &h3_gpio_led_data,
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&nor_device,
+	&nand_device,
+        &smc91x_device,
+	&intlat_device,
+	&h3_kp_device,
+	&h3_lcd_device,
+	&h3_gpio_leds,
+};
+
+static struct omap_usb_config h3_usb_config __initdata = {
+	/* usb1 has a Mini-AB port and external isp1301 transceiver */
+	.otg	    = 2,
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+	.hmc_mode       = 19,   /* 0:host(off) 1:dev|otg 2:disabled */
+#elif  defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
+	.hmc_mode       = 20,   /* 1:dev|otg(off) 1:host 2:disabled */
+#endif
+
+	.pins[1]	= 3,
+};
+
+static struct omap_lcd_config h3_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct i2c_board_info __initdata h3_i2c_board_info[] = {
+       {
+		I2C_BOARD_INFO("tps65013", 0x48),
+       },
+	{
+		I2C_BOARD_INFO("isp1301_omap", 0x2d),
+	},
+};
+
+static void __init h3_init(void)
+{
+	h3_init_smc91x();
+
+	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
+	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
+	 * notice whether a NAND chip is enabled at probe time.
+	 *
+	 * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND
+	 * (which on H2 may be 16bit) on CS3.  Try detecting that in code here,
+	 * to avoid probing every possible flash configuration...
+	 */
+	nor_resource.end = nor_resource.start = omap_cs3_phys();
+	nor_resource.end += SZ_32M - 1;
+
+	nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
+	nand_resource.end += SZ_4K - 1;
+	BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0);
+	gpio_direction_input(H3_NAND_RB_GPIO_PIN);
+
+	/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
+	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
+	omap_cfg_reg(V2_1710_GPIO10);
+
+	/* Mux pins for keypad */
+	omap_cfg_reg(F18_1610_KBC0);
+	omap_cfg_reg(D20_1610_KBC1);
+	omap_cfg_reg(D19_1610_KBC2);
+	omap_cfg_reg(E18_1610_KBC3);
+	omap_cfg_reg(C21_1610_KBC4);
+	omap_cfg_reg(G18_1610_KBR0);
+	omap_cfg_reg(F19_1610_KBR1);
+	omap_cfg_reg(H14_1610_KBR2);
+	omap_cfg_reg(E20_1610_KBR3);
+	omap_cfg_reg(E19_1610_KBR4);
+	omap_cfg_reg(N19_1610_KBR5);
+
+	/* GPIO based LEDs */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
+	smc91x_resources[1].start = gpio_to_irq(40);
+	smc91x_resources[1].end = gpio_to_irq(40);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO);
+	spi_register_board_info(h3_spi_board_info,
+				ARRAY_SIZE(h3_spi_board_info));
+	omap_serial_init();
+	h3_i2c_board_info[1].irq = gpio_to_irq(14);
+	omap_register_i2c_bus(1, 100, h3_i2c_board_info,
+			      ARRAY_SIZE(h3_i2c_board_info));
+	omap1_usb_init(&h3_usb_config);
+	h3_mmc_init();
+
+	omapfb_set_lcd_config(&h3_lcd_config);
+}
+
+MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
+	/* Maintainer: Texas Instruments, Inc. */
+	.atag_offset	= 0x100,
+	.map_io		= omap16xx_map_io,
+	.init_early     = omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= h3_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.h b/arch/arm/mach-omap1/board-h3.h
new file mode 100644
index 000000000..78de535be
--- /dev/null
+++ b/arch/arm/mach-omap1/board-h3.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-omap1/board-h3.h
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_H3_H
+#define __ASM_ARCH_OMAP_H3_H
+
+#define H3_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define H3_TPS_GPIO_MMC_PWR_EN	(H3_TPS_GPIO_BASE + 4)
+
+extern void h3_mmc_init(void);
+
+#endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
new file mode 100644
index 000000000..35a2379b9
--- /dev/null
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -0,0 +1,608 @@
+/*
+ * HTC Herald board configuration
+ * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
+ * Copyright (C) 2009 Wing Linux
+ *
+ * Based on the board-htcwizard.c file from the linwizard project:
+ * Copyright (C) 2006 Unai Uribarri
+ * Copyright (C) 2008 linwizard.sourceforge.net
+ *
+ * This  program is  free  software; you  can  redistribute it  and/or
+ * modify  it under the  terms of  the GNU  General Public  License as
+ * published by the Free Software  Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT  ANY  WARRANTY;  without   even  the  implied  warranty  of
+ * MERCHANTABILITY or  FITNESS FOR A PARTICULAR PURPOSE.   See the GNU
+ * General Public License for more details.
+ *
+ * You should have  received a copy of the  GNU General Public License
+ * along  with  this program;  if  not,  write  to the  Free  Software
+ * Foundation,  Inc.,  51 Franklin  Street,  Fifth  Floor, Boston,  MA
+ * 02110-1301, USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/htcpld.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/omap7xx.h>
+#include "mmc.h"
+
+#include <mach/irqs.h>
+#include <mach/usb.h>
+
+#include "common.h"
+
+/* LCD register definition */
+#define       OMAP_LCDC_CONTROL               (0xfffec000 + 0x00)
+#define       OMAP_LCDC_STATUS                (0xfffec000 + 0x10)
+#define       OMAP_DMA_LCD_CCR                (0xfffee300 + 0xc2)
+#define       OMAP_DMA_LCD_CTRL               (0xfffee300 + 0xc4)
+#define       OMAP_LCDC_CTRL_LCD_EN           (1 << 0)
+#define       OMAP_LCDC_STAT_DONE             (1 << 0)
+
+/* GPIO definitions for the power button and keyboard slide switch */
+#define HTCHERALD_GPIO_POWER 139
+#define HTCHERALD_GPIO_SLIDE 174
+#define HTCHERALD_GIRQ_BTNS 141
+
+/* GPIO definitions for the touchscreen */
+#define HTCHERALD_GPIO_TS 76
+
+/* HTCPLD definitions */
+
+/*
+ * CPLD Logic
+ *
+ * Chip 3 - 0x03
+ *
+ * Function            7 6 5 4  3 2 1 0
+ * ------------------------------------
+ * DPAD light          x x x x  x x x 1
+ * SoundDev            x x x x  1 x x x
+ * Screen white        1 x x x  x x x x
+ * MMC power on        x x x x  x 1 x x
+ * Happy times (n)     0 x x x  x 1 x x
+ *
+ * Chip 4 - 0x04
+ *
+ * Function            7 6 5 4  3 2 1 0
+ * ------------------------------------
+ * Keyboard light      x x x x  x x x 1
+ * LCD Bright (4)      x x x x  x 1 1 x
+ * LCD Bright (3)      x x x x  x 0 1 x
+ * LCD Bright (2)      x x x x  x 1 0 x
+ * LCD Bright (1)      x x x x  x 0 0 x
+ * LCD Off             x x x x  0 x x x
+ * LCD image (fb)      1 x x x  x x x x
+ * LCD image (white)   0 x x x  x x x x
+ * Caps lock LED       x x 1 x  x x x x
+ *
+ * Chip 5 - 0x05
+ *
+ * Function            7 6 5 4  3 2 1 0
+ * ------------------------------------
+ * Red (solid)         x x x x  x 1 x x
+ * Red (flash)         x x x x  x x 1 x
+ * Green (GSM flash)   x x x x  1 x x x
+ * Green (GSM solid)   x x x 1  x x x x
+ * Green (wifi flash)  x x 1 x  x x x x
+ * Blue (bt flash)     x 1 x x  x x x x
+ * DPAD Int Enable     1 x x x  x x x 0
+ *
+ * (Combinations of the above can be made for different colors.)
+ * The direction pad interrupt enable must be set each time the
+ * interrupt is handled.
+ *
+ * Chip 6 - 0x06
+ *
+ * Function            7 6 5 4  3 2 1 0
+ * ------------------------------------
+ * Vibrator            x x x x  1 x x x
+ * Alt LED             x x x 1  x x x x
+ * Screen white        1 x x x  x x x x
+ * Screen white        x x 1 x  x x x x
+ * Screen white        x 0 x x  x x x x
+ * Enable kbd dpad     x x x x  x x 0 x
+ * Happy Times         0 1 0 x  x x 0 x
+ */
+
+/*
+ * HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account
+ * for the 16 MPUIO lines.
+ */
+#define HTCPLD_GPIO_START_OFFSET	(OMAP_MAX_GPIO_LINES + 16)
+#define HTCPLD_IRQ(chip, offset)	(OMAP_IRQ_END + 8 * (chip) + (offset))
+#define HTCPLD_BASE(chip, offset)	\
+	(HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset))
+
+#define HTCPLD_GPIO_LED_DPAD		HTCPLD_BASE(0, 0)
+#define HTCPLD_GPIO_LED_KBD		HTCPLD_BASE(1, 0)
+#define HTCPLD_GPIO_LED_CAPS		HTCPLD_BASE(1, 5)
+#define HTCPLD_GPIO_LED_RED_FLASH	HTCPLD_BASE(2, 1)
+#define HTCPLD_GPIO_LED_RED_SOLID	HTCPLD_BASE(2, 2)
+#define HTCPLD_GPIO_LED_GREEN_FLASH	HTCPLD_BASE(2, 3)
+#define HTCPLD_GPIO_LED_GREEN_SOLID	HTCPLD_BASE(2, 4)
+#define HTCPLD_GPIO_LED_WIFI		HTCPLD_BASE(2, 5)
+#define HTCPLD_GPIO_LED_BT		HTCPLD_BASE(2, 6)
+#define HTCPLD_GPIO_LED_VIBRATE		HTCPLD_BASE(3, 3)
+#define HTCPLD_GPIO_LED_ALT		HTCPLD_BASE(3, 4)
+
+#define HTCPLD_GPIO_RIGHT_KBD		HTCPLD_BASE(6, 7)
+#define HTCPLD_GPIO_UP_KBD		HTCPLD_BASE(6, 6)
+#define HTCPLD_GPIO_LEFT_KBD		HTCPLD_BASE(6, 5)
+#define HTCPLD_GPIO_DOWN_KBD		HTCPLD_BASE(6, 4)
+
+#define HTCPLD_GPIO_RIGHT_DPAD		HTCPLD_BASE(7, 7)
+#define HTCPLD_GPIO_UP_DPAD		HTCPLD_BASE(7, 6)
+#define HTCPLD_GPIO_LEFT_DPAD		HTCPLD_BASE(7, 5)
+#define HTCPLD_GPIO_DOWN_DPAD		HTCPLD_BASE(7, 4)
+#define HTCPLD_GPIO_ENTER_DPAD		HTCPLD_BASE(7, 3)
+
+/*
+ * The htcpld chip requires a gpio write to a specific line
+ * to re-enable interrupts after one has occurred.
+ */
+#define HTCPLD_GPIO_INT_RESET_HI	HTCPLD_BASE(2, 7)
+#define HTCPLD_GPIO_INT_RESET_LO	HTCPLD_BASE(2, 0)
+
+/* Chip 5 */
+#define HTCPLD_IRQ_RIGHT_KBD		HTCPLD_IRQ(0, 7)
+#define HTCPLD_IRQ_UP_KBD		HTCPLD_IRQ(0, 6)
+#define HTCPLD_IRQ_LEFT_KBD		HTCPLD_IRQ(0, 5)
+#define HTCPLD_IRQ_DOWN_KBD		HTCPLD_IRQ(0, 4)
+
+/* Chip 6 */
+#define HTCPLD_IRQ_RIGHT_DPAD		HTCPLD_IRQ(1, 7)
+#define HTCPLD_IRQ_UP_DPAD		HTCPLD_IRQ(1, 6)
+#define HTCPLD_IRQ_LEFT_DPAD		HTCPLD_IRQ(1, 5)
+#define HTCPLD_IRQ_DOWN_DPAD		HTCPLD_IRQ(1, 4)
+#define HTCPLD_IRQ_ENTER_DPAD		HTCPLD_IRQ(1, 3)
+
+/* Keyboard definition */
+
+static const unsigned int htc_herald_keymap[] = {
+	KEY(0, 0, KEY_RECORD), /* Mail button */
+	KEY(1, 0, KEY_CAMERA), /* Camera */
+	KEY(2, 0, KEY_PHONE), /* Send key */
+	KEY(3, 0, KEY_VOLUMEUP), /* Volume up */
+	KEY(4, 0, KEY_F2),  /* Right bar (landscape) */
+	KEY(5, 0, KEY_MAIL), /* Win key (portrait) */
+	KEY(6, 0, KEY_DIRECTORY), /* Right bar (protrait) */
+	KEY(0, 1, KEY_LEFTCTRL), /* Windows key */
+	KEY(1, 1, KEY_COMMA),
+	KEY(2, 1, KEY_M),
+	KEY(3, 1, KEY_K),
+	KEY(4, 1, KEY_SLASH), /* OK key */
+	KEY(5, 1, KEY_I),
+	KEY(6, 1, KEY_U),
+	KEY(0, 2, KEY_LEFTALT),
+	KEY(1, 2, KEY_TAB),
+	KEY(2, 2, KEY_N),
+	KEY(3, 2, KEY_J),
+	KEY(4, 2, KEY_ENTER),
+	KEY(5, 2, KEY_H),
+	KEY(6, 2, KEY_Y),
+	KEY(0, 3, KEY_SPACE),
+	KEY(1, 3, KEY_L),
+	KEY(2, 3, KEY_B),
+	KEY(3, 3, KEY_V),
+	KEY(4, 3, KEY_BACKSPACE),
+	KEY(5, 3, KEY_G),
+	KEY(6, 3, KEY_T),
+	KEY(0, 4, KEY_CAPSLOCK), /* Shift */
+	KEY(1, 4, KEY_C),
+	KEY(2, 4, KEY_F),
+	KEY(3, 4, KEY_R),
+	KEY(4, 4, KEY_O),
+	KEY(5, 4, KEY_E),
+	KEY(6, 4, KEY_D),
+	KEY(0, 5, KEY_X),
+	KEY(1, 5, KEY_Z),
+	KEY(2, 5, KEY_S),
+	KEY(3, 5, KEY_W),
+	KEY(4, 5, KEY_P),
+	KEY(5, 5, KEY_Q),
+	KEY(6, 5, KEY_A),
+	KEY(0, 6, KEY_CONNECT), /* Voice button */
+	KEY(2, 6, KEY_CANCEL), /* End key */
+	KEY(3, 6, KEY_VOLUMEDOWN), /* Volume down */
+	KEY(4, 6, KEY_F1), /* Left bar (landscape) */
+	KEY(5, 6, KEY_WWW), /* OK button (portrait) */
+	KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */
+};
+
+static const struct matrix_keymap_data htc_herald_keymap_data = {
+	.keymap		= htc_herald_keymap,
+	.keymap_size	= ARRAY_SIZE(htc_herald_keymap),
+};
+
+static struct omap_kp_platform_data htcherald_kp_data = {
+	.rows	= 7,
+	.cols	= 7,
+	.delay = 20,
+	.rep = true,
+	.keymap_data = &htc_herald_keymap_data,
+};
+
+static struct resource kp_resources[] = {
+	[0] = {
+		.start	= INT_7XX_MPUIO_KEYPAD,
+		.end	= INT_7XX_MPUIO_KEYPAD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &htcherald_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(kp_resources),
+	.resource	= kp_resources,
+};
+
+/* GPIO buttons for keyboard slide and power button */
+static struct gpio_keys_button herald_gpio_keys_table[] = {
+	{BTN_0,  HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20},
+	{SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW,  1, 20},
+
+	{KEY_LEFT,  HTCPLD_GPIO_LEFT_KBD,  1, "LEFT",  EV_KEY, 1, 20},
+	{KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20},
+	{KEY_UP,    HTCPLD_GPIO_UP_KBD,    1, "UP",    EV_KEY, 1, 20},
+	{KEY_DOWN,  HTCPLD_GPIO_DOWN_KBD,  1, "DOWN",  EV_KEY, 1, 20},
+
+	{KEY_LEFT,  HTCPLD_GPIO_LEFT_DPAD,   1, "DLEFT",  EV_KEY, 1, 20},
+	{KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD,  1, "DRIGHT", EV_KEY, 1, 20},
+	{KEY_UP,    HTCPLD_GPIO_UP_DPAD,     1, "DUP",    EV_KEY, 1, 20},
+	{KEY_DOWN,  HTCPLD_GPIO_DOWN_DPAD,   1, "DDOWN",  EV_KEY, 1, 20},
+	{KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD,  1, "DENTER", EV_KEY, 1, 20},
+};
+
+static struct gpio_keys_platform_data herald_gpio_keys_data = {
+	.buttons	= herald_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(herald_gpio_keys_table),
+	.rep		= true,
+};
+
+static struct platform_device herald_gpiokeys_device = {
+	.name      = "gpio-keys",
+	.id		= -1,
+	.dev = {
+		.platform_data = &herald_gpio_keys_data,
+	},
+};
+
+/* LEDs for the Herald.  These connect to the HTCPLD GPIO device. */
+static struct gpio_led gpio_leds[] = {
+	{"dpad",        NULL, HTCPLD_GPIO_LED_DPAD,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"kbd",         NULL, HTCPLD_GPIO_LED_KBD,         0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"vibrate",     NULL, HTCPLD_GPIO_LED_VIBRATE,     0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"red_solid",   "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"red_flash",   NULL, HTCPLD_GPIO_LED_RED_FLASH,   0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"wifi",        NULL, HTCPLD_GPIO_LED_WIFI,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"bt",          NULL, HTCPLD_GPIO_LED_BT,          0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"caps",        NULL, HTCPLD_GPIO_LED_CAPS,        0, 0, LEDS_GPIO_DEFSTATE_OFF},
+	{"alt",         NULL, HTCPLD_GPIO_LED_ALT,         0, 0, LEDS_GPIO_DEFSTATE_OFF},
+};
+
+static struct gpio_led_platform_data gpio_leds_data = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device gpio_leds_device = {
+	.name		= "leds-gpio",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &gpio_leds_data,
+	},
+};
+
+/* HTC PLD chips */
+
+static struct resource htcpld_resources[] = {
+	[0] = {
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct htcpld_chip_platform_data htcpld_chips[] = {
+	[0] = {
+		.addr		= 0x03,
+		.reset		= 0x04,
+		.num_gpios	= 8,
+		.gpio_out_base	= HTCPLD_BASE(0, 0),
+		.gpio_in_base	= HTCPLD_BASE(4, 0),
+	},
+	[1] = {
+		.addr		= 0x04,
+		.reset		= 0x8e,
+		.num_gpios	= 8,
+		.gpio_out_base	= HTCPLD_BASE(1, 0),
+		.gpio_in_base	= HTCPLD_BASE(5, 0),
+	},
+	[2] = {
+		.addr		= 0x05,
+		.reset		= 0x80,
+		.num_gpios	= 8,
+		.gpio_out_base	= HTCPLD_BASE(2, 0),
+		.gpio_in_base	= HTCPLD_BASE(6, 0),
+		.irq_base	= HTCPLD_IRQ(0, 0),
+		.num_irqs	= 8,
+	},
+	[3] = {
+		.addr		= 0x06,
+		.reset		= 0x40,
+		.num_gpios	= 8,
+		.gpio_out_base	= HTCPLD_BASE(3, 0),
+		.gpio_in_base	= HTCPLD_BASE(7, 0),
+		.irq_base	= HTCPLD_IRQ(1, 0),
+		.num_irqs	= 8,
+	},
+};
+
+static struct htcpld_core_platform_data htcpld_pfdata = {
+	.int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI,
+	.int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO,
+	.i2c_adapter_id	   = 1,
+
+	.chip		   = htcpld_chips,
+	.num_chip	   = ARRAY_SIZE(htcpld_chips),
+};
+
+static struct platform_device htcpld_device = {
+	.name		= "i2c-htcpld",
+	.id		= -1,
+	.resource	= htcpld_resources,
+	.num_resources	= ARRAY_SIZE(htcpld_resources),
+	.dev	= {
+		.platform_data	= &htcpld_pfdata,
+	},
+};
+
+/* USB Device */
+static struct omap_usb_config htcherald_usb_config __initdata = {
+	.otg = 0,
+	.register_host = 0,
+	.register_dev  = 1,
+	.hmc_mode = 4,
+	.pins[0] = 2,
+};
+
+/* LCD Device resources */
+static struct omap_lcd_config htcherald_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct platform_device lcd_device = {
+	.name           = "lcd_htcherald",
+	.id             = -1,
+};
+
+/* MMC Card */
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+static struct omap_mmc_platform_data htc_mmc1_data = {
+	.nr_slots                       = 1,
+	.switch_slot                    = NULL,
+	.slots[0]       = {
+		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
+		.name                   = "mmcblk",
+		.nomux                  = 1,
+		.wires                  = 4,
+		.switch_pin             = -1,
+	},
+};
+
+static struct omap_mmc_platform_data *htc_mmc_data[1];
+#endif
+
+
+/* Platform devices for the Herald */
+static struct platform_device *devices[] __initdata = {
+	&kp_device,
+	&lcd_device,
+	&htcpld_device,
+	&gpio_leds_device,
+	&herald_gpiokeys_device,
+};
+
+/*
+ * Touchscreen
+ */
+static const struct ads7846_platform_data htcherald_ts_platform_data = {
+	.model			= 7846,
+	.keep_vref_on		= 1,
+	.x_plate_ohms		= 496,
+	.gpio_pendown		= HTCHERALD_GPIO_TS,
+	.pressure_max		= 10000,
+	.pressure_min		= 5000,
+	.x_min			= 528,
+	.x_max			= 3760,
+	.y_min			= 624,
+	.y_max			= 3760,
+};
+
+static struct spi_board_info __initdata htcherald_spi_board_info[] = {
+	{
+		.modalias		= "ads7846",
+		.platform_data		= &htcherald_ts_platform_data,
+		.max_speed_hz		= 2500000,
+		.bus_num		= 2,
+		.chip_select		= 1,
+	}
+};
+
+/*
+ * Init functions from here on
+ */
+
+static void __init htcherald_lcd_init(void)
+{
+	u32 reg;
+	unsigned int tries = 200;
+
+	/* disable controller if active */
+	reg = omap_readl(OMAP_LCDC_CONTROL);
+	if (reg & OMAP_LCDC_CTRL_LCD_EN) {
+		reg &= ~OMAP_LCDC_CTRL_LCD_EN;
+		omap_writel(reg, OMAP_LCDC_CONTROL);
+
+		/* wait for end of frame */
+		while (!(omap_readl(OMAP_LCDC_STATUS) & OMAP_LCDC_STAT_DONE)) {
+			tries--;
+			if (!tries)
+				break;
+		}
+		if (!tries)
+			pr_err("Timeout waiting for end of frame -- LCD may not be available\n");
+
+		/* turn off DMA */
+		reg = omap_readw(OMAP_DMA_LCD_CCR);
+		reg &= ~(1 << 7);
+		omap_writew(reg, OMAP_DMA_LCD_CCR);
+
+		reg = omap_readw(OMAP_DMA_LCD_CTRL);
+		reg &= ~(1 << 8);
+		omap_writew(reg, OMAP_DMA_LCD_CTRL);
+	}
+}
+
+static void __init htcherald_map_io(void)
+{
+	omap7xx_map_io();
+
+	/*
+	 * The LCD panel must be disabled and DMA turned off here, as doing
+	 * it later causes the LCD never to reinitialize.
+	 */
+	htcherald_lcd_init();
+
+	printk(KERN_INFO "htcherald_map_io done.\n");
+}
+
+static void __init htcherald_disable_watchdog(void)
+{
+	/* Disable watchdog if running */
+	if (omap_readl(OMAP_WDT_TIMER_MODE) & 0x8000) {
+		/*
+		 * disable a potentially running watchdog timer before
+		 * it kills us.
+		 */
+		printk(KERN_WARNING "OMAP850 Watchdog seems to be activated, disabling it for now.\n");
+		omap_writel(0xF5, OMAP_WDT_TIMER_MODE);
+		omap_writel(0xA0, OMAP_WDT_TIMER_MODE);
+	}
+}
+
+#define HTCHERALD_GPIO_USB_EN1 33
+#define HTCHERALD_GPIO_USB_EN2 73
+#define HTCHERALD_GPIO_USB_DM  35
+#define HTCHERALD_GPIO_USB_DP  36
+
+static void __init htcherald_usb_enable(void)
+{
+	unsigned int tries = 20;
+	unsigned int value = 0;
+
+	/* Request the GPIOs we need to control here */
+	if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0)
+		goto err1;
+
+	if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0)
+		goto err2;
+
+	if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0)
+		goto err3;
+
+	if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0)
+		goto err4;
+
+	/* force USB_EN GPIO to 0 */
+	do {
+		/* output low */
+		gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0);
+	} while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 &&
+			--tries);
+
+	if (value == 1)
+		printk(KERN_WARNING "Unable to reset USB, trying to continue\n");
+
+	gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */
+	gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */
+	gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */
+
+	goto done;
+
+err4:
+	gpio_free(HTCHERALD_GPIO_USB_DM);
+err3:
+	gpio_free(HTCHERALD_GPIO_USB_EN2);
+err2:
+	gpio_free(HTCHERALD_GPIO_USB_EN1);
+err1:
+	printk(KERN_ERR "Unabled to request GPIO for USB\n");
+done:
+	printk(KERN_INFO "USB setup complete.\n");
+}
+
+static void __init htcherald_init(void)
+{
+	printk(KERN_INFO "HTC Herald init.\n");
+
+	/* Do board initialization before we register all the devices */
+	htcpld_resources[0].start = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
+	htcpld_resources[0].end = gpio_to_irq(HTCHERALD_GIRQ_BTNS);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	htcherald_disable_watchdog();
+
+	htcherald_usb_enable();
+	omap1_usb_init(&htcherald_usb_config);
+
+	htcherald_spi_board_info[0].irq = gpio_to_irq(HTCHERALD_GPIO_TS);
+	spi_register_board_info(htcherald_spi_board_info,
+		ARRAY_SIZE(htcherald_spi_board_info));
+
+	omap_register_i2c_bus(1, 100, NULL, 0);
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+	htc_mmc_data[0] = &htc_mmc1_data;
+	omap1_init_mmc(htc_mmc_data, 1);
+#endif
+
+	omapfb_set_lcd_config(&htcherald_lcd_config);
+}
+
+MACHINE_START(HERALD, "HTC Herald")
+	/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
+	/* Maintainer: wing-linux.sourceforge.net */
+	.atag_offset    = 0x100,
+	.map_io         = htcherald_map_io,
+	.init_early     = omap1_init_early,
+	.init_irq       = omap1_init_irq,
+	.init_machine   = htcherald_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
new file mode 100644
index 000000000..c49ce83cc
--- /dev/null
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -0,0 +1,463 @@
+/*
+ * linux/arch/arm/mach-omap1/board-innovator.c
+ *
+ * Board specific inits for OMAP-1510 and OMAP-1610 Innovator
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/smc91x.h>
+#include <linux/omapfb.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/mux.h>
+#include <mach/flash.h>
+#include <mach/tc.h>
+#include <linux/platform_data/keypad-omap.h>
+
+#include <mach/hardware.h>
+#include <mach/usb.h>
+
+#include "iomap.h"
+#include "common.h"
+#include "mmc.h"
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define INNOVATOR1610_ETHR_START	0x04000300
+
+static const unsigned int innovator_keymap[] = {
+	KEY(0, 0, KEY_F1),
+	KEY(3, 0, KEY_DOWN),
+	KEY(1, 1, KEY_F2),
+	KEY(2, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_F3),
+	KEY(1, 2, KEY_F4),
+	KEY(2, 2, KEY_UP),
+	KEY(2, 3, KEY_ENTER),
+	KEY(3, 3, KEY_LEFT),
+};
+
+static struct mtd_partition innovator_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	},
+	/* kernel */
+	{
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	},
+	/* rest of flash1 is a file system */
+	{
+	      .name		= "rootfs",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_16M - SZ_2M - 2 * SZ_128K,
+	      .mask_flags	= 0
+	},
+	/* file system */
+	{
+	      .name		= "filesystem",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data innovator_flash_data = {
+	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
+	.parts		= innovator_partitions,
+	.nr_parts	= ARRAY_SIZE(innovator_partitions),
+};
+
+static struct resource innovator_flash_resource = {
+	.start		= OMAP_CS0_PHYS,
+	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device innovator_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &innovator_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &innovator_flash_resource,
+};
+
+static struct resource innovator_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct matrix_keymap_data innovator_keymap_data = {
+	.keymap		= innovator_keymap,
+	.keymap_size	= ARRAY_SIZE(innovator_keymap),
+};
+
+static struct omap_kp_platform_data innovator_kp_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap_data	= &innovator_keymap_data,
+	.delay		= 4,
+};
+
+static struct platform_device innovator_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &innovator_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(innovator_kp_resources),
+	.resource	= innovator_kp_resources,
+};
+
+static struct smc91x_platdata innovator_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
+#ifdef CONFIG_ARCH_OMAP15XX
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc innovator1510_io_desc[] __initdata = {
+	{
+		.virtual	= OMAP1510_FPGA_BASE,
+		.pfn		= __phys_to_pfn(OMAP1510_FPGA_START),
+		.length		= OMAP1510_FPGA_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+static struct resource innovator1510_smc91x_resources[] = {
+	[0] = {
+		.start	= OMAP1510_FPGA_ETHR_START,	/* Physical */
+		.end	= OMAP1510_FPGA_ETHR_START + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= OMAP1510_INT_ETHER,
+		.end	= OMAP1510_INT_ETHER,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct platform_device innovator1510_smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &innovator_smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(innovator1510_smc91x_resources),
+	.resource	= innovator1510_smc91x_resources,
+};
+
+static struct platform_device innovator1510_lcd_device = {
+	.name		= "lcd_inn1510",
+	.id		= -1,
+};
+
+static struct platform_device innovator1510_spi_device = {
+	.name		= "spi_inn1510",
+	.id		= -1,
+};
+
+static struct platform_device *innovator1510_devices[] __initdata = {
+	&innovator_flash_device,
+	&innovator1510_smc91x_device,
+	&innovator_kp_device,
+	&innovator1510_lcd_device,
+	&innovator1510_spi_device,
+};
+
+static int innovator_get_pendown_state(void)
+{
+	return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
+}
+
+static const struct ads7846_platform_data innovator1510_ts_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.get_pendown_state	= innovator_get_pendown_state,
+};
+
+static struct spi_board_info __initdata innovator1510_boardinfo[] = { {
+	/* FPGA (bus "10") CS0 has an ads7846e */
+	.modalias		= "ads7846",
+	.platform_data		= &innovator1510_ts_info,
+	.irq			= OMAP1510_INT_FPGA_TS,
+	.max_speed_hz		= 120000 /* max sample rate at 3V */
+					* 26 /* command + data + overhead */,
+	.bus_num		= 10,
+	.chip_select		= 0,
+} };
+
+#endif /* CONFIG_ARCH_OMAP15XX */
+
+#ifdef CONFIG_ARCH_OMAP16XX
+
+static struct resource innovator1610_smc91x_resources[] = {
+	[0] = {
+		.start	= INNOVATOR1610_ETHR_START,		/* Physical */
+		.end	= INNOVATOR1610_ETHR_START + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device innovator1610_smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &innovator_smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(innovator1610_smc91x_resources),
+	.resource	= innovator1610_smc91x_resources,
+};
+
+static struct platform_device innovator1610_lcd_device = {
+	.name		= "inn1610_lcd",
+	.id		= -1,
+};
+
+static struct platform_device *innovator1610_devices[] __initdata = {
+	&innovator_flash_device,
+	&innovator1610_smc91x_device,
+	&innovator_kp_device,
+	&innovator1610_lcd_device,
+};
+
+#endif /* CONFIG_ARCH_OMAP16XX */
+
+static void __init innovator_init_smc91x(void)
+{
+	if (cpu_is_omap1510()) {
+		__raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
+			   OMAP1510_FPGA_RST);
+		udelay(750);
+	} else {
+		if (gpio_request(0, "SMC91x irq") < 0) {
+			printk("Error requesting gpio 0 for smc91x irq\n");
+			return;
+		}
+	}
+}
+
+#ifdef CONFIG_ARCH_OMAP15XX
+static struct omap_usb_config innovator1510_usb_config __initdata = {
+	/* for bundled non-standard host and peripheral cables */
+	.hmc_mode	= 4,
+
+	.register_host	= 1,
+	.pins[1]	= 6,
+	.pins[2]	= 6,		/* Conflicts with UART2 */
+
+	.register_dev	= 1,
+	.pins[0]	= 2,
+};
+
+static struct omap_lcd_config innovator1510_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+static struct omap_usb_config h2_usb_config __initdata = {
+	/* usb1 has a Mini-AB port and external isp1301 transceiver */
+	.otg		= 2,
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
+	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
+#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
+	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
+#endif
+
+	.pins[1]	= 3,
+};
+
+static struct omap_lcd_config innovator1610_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+#endif
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static int mmc_set_power(struct device *dev, int slot, int power_on,
+				int vdd)
+{
+	if (power_on)
+		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
+				OMAP1510_FPGA_POWER);
+	else
+		__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
+				OMAP1510_FPGA_POWER);
+
+	return 0;
+}
+
+/*
+ * Innovator could use the following functions tested:
+ * - mmc_get_wp that uses OMAP_MPUIO(3)
+ * - mmc_get_cover_state that uses FPGA F4 UIO43
+ */
+static struct omap_mmc_platform_data mmc1_data = {
+	.nr_slots                       = 1,
+	.slots[0]       = {
+		.set_power		= mmc_set_power,
+		.wires			= 4,
+		.name                   = "mmcblk",
+	},
+};
+
+static struct omap_mmc_platform_data *mmc_data[OMAP16XX_NR_MMC];
+
+static void __init innovator_mmc_init(void)
+{
+	mmc_data[0] = &mmc1_data;
+	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);
+}
+
+#else
+static inline void innovator_mmc_init(void)
+{
+}
+#endif
+
+static void __init innovator_init(void)
+{
+	if (cpu_is_omap1510())
+		omap1510_fpga_init_irq();
+	innovator_init_smc91x();
+
+#ifdef CONFIG_ARCH_OMAP15XX
+	if (cpu_is_omap1510()) {
+		unsigned char reg;
+
+		/* mux pins for uarts */
+		omap_cfg_reg(UART1_TX);
+		omap_cfg_reg(UART1_RTS);
+		omap_cfg_reg(UART2_TX);
+		omap_cfg_reg(UART2_RTS);
+		omap_cfg_reg(UART3_TX);
+		omap_cfg_reg(UART3_RX);
+
+		reg = __raw_readb(OMAP1510_FPGA_POWER);
+		reg |= OMAP1510_FPGA_PCR_COM1_EN;
+		__raw_writeb(reg, OMAP1510_FPGA_POWER);
+		udelay(10);
+
+		reg = __raw_readb(OMAP1510_FPGA_POWER);
+		reg |= OMAP1510_FPGA_PCR_COM2_EN;
+		__raw_writeb(reg, OMAP1510_FPGA_POWER);
+		udelay(10);
+
+		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
+		spi_register_board_info(innovator1510_boardinfo,
+				ARRAY_SIZE(innovator1510_boardinfo));
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	if (!cpu_is_omap1510()) {
+		innovator1610_smc91x_resources[1].start = gpio_to_irq(0);
+		innovator1610_smc91x_resources[1].end = gpio_to_irq(0);
+		platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
+	}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+	if (cpu_is_omap1510()) {
+		omap1_usb_init(&innovator1510_usb_config);
+		omapfb_set_lcd_config(&innovator1510_lcd_config);
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	if (cpu_is_omap1610()) {
+		omap1_usb_init(&h2_usb_config);
+		omapfb_set_lcd_config(&innovator1610_lcd_config);
+	}
+#endif
+	omap_serial_init();
+	omap_register_i2c_bus(1, 100, NULL, 0);
+	innovator_mmc_init();
+}
+
+/*
+ * REVISIT: Assume 15xx for now, we don't want to do revision check
+ * until later on. The right way to fix this is to set up a different
+ * machine_id for 16xx Innovator, or use device tree.
+ */
+static void __init innovator_map_io(void)
+{
+#ifdef CONFIG_ARCH_OMAP15XX
+	omap15xx_map_io();
+
+	iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
+	udelay(10);	/* Delay needed for FPGA */
+
+	/* Dump the Innovator FPGA rev early - useful info for support. */
+	pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
+			__raw_readb(OMAP1510_FPGA_REV_HIGH),
+			__raw_readb(OMAP1510_FPGA_REV_LOW),
+			__raw_readb(OMAP1510_FPGA_BOARD_REV));
+#endif
+}
+
+MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
+	/* Maintainer: MontaVista Software, Inc. */
+	.atag_offset	= 0x100,
+	.map_io		= innovator_map_io,
+	.init_early     = omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= innovator_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c
new file mode 100644
index 000000000..4d0835327
--- /dev/null
+++ b/arch/arm/mach-omap1/board-nand.c
@@ -0,0 +1,37 @@
+/*
+ * linux/arch/arm/mach-omap1/board-nand.c
+ *
+ * Common OMAP1 board NAND code
+ *
+ * Copyright (C) 2004, 2012 Texas Instruments, Inc.
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ *         Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+
+#include "common.h"
+
+void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long mask;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+	if (ctrl & NAND_ALE)
+		mask |= 0x04;
+
+	writeb(cmd, this->IO_ADDR_W + mask);
+}
+
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
new file mode 100644
index 000000000..85089d821
--- /dev/null
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -0,0 +1,301 @@
+/*
+ * linux/arch/arm/mach-omap1/board-nokia770.c
+ *
+ * Modified from board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/clk.h>
+#include <linux/omapfb.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+
+#include <linux/platform_data/keypad-omap.h>
+#include <linux/platform_data/lcd-mipid.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/i2c-cbus-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/mux.h>
+
+#include <mach/hardware.h>
+#include <mach/usb.h>
+
+#include "common.h"
+#include "clock.h"
+#include "mmc.h"
+
+#define ADS7846_PENDOWN_GPIO	15
+
+static const unsigned int nokia770_keymap[] = {
+	KEY(1, 0, GROUP_0 | KEY_UP),
+	KEY(2, 0, GROUP_1 | KEY_F5),
+	KEY(0, 1, GROUP_0 | KEY_LEFT),
+	KEY(1, 1, GROUP_0 | KEY_ENTER),
+	KEY(2, 1, GROUP_0 | KEY_RIGHT),
+	KEY(0, 2, GROUP_1 | KEY_ESC),
+	KEY(1, 2, GROUP_0 | KEY_DOWN),
+	KEY(2, 2, GROUP_1 | KEY_F4),
+	KEY(0, 3, GROUP_2 | KEY_F7),
+	KEY(1, 3, GROUP_2 | KEY_F8),
+	KEY(2, 3, GROUP_2 | KEY_F6),
+};
+
+static struct resource nokia770_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct matrix_keymap_data nokia770_keymap_data = {
+	.keymap		= nokia770_keymap,
+	.keymap_size	= ARRAY_SIZE(nokia770_keymap),
+};
+
+static struct omap_kp_platform_data nokia770_kp_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap_data	= &nokia770_keymap_data,
+	.delay		= 4,
+};
+
+static struct platform_device nokia770_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &nokia770_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(nokia770_kp_resources),
+	.resource	= nokia770_kp_resources,
+};
+
+static struct platform_device *nokia770_devices[] __initdata = {
+	&nokia770_kp_device,
+};
+
+static void mipid_shutdown(struct mipid_platform_data *pdata)
+{
+	if (pdata->nreset_gpio != -1) {
+		printk(KERN_INFO "shutdown LCD\n");
+		gpio_set_value(pdata->nreset_gpio, 0);
+		msleep(120);
+	}
+}
+
+static struct mipid_platform_data nokia770_mipid_platform_data = {
+	.shutdown = mipid_shutdown,
+};
+
+static struct omap_lcd_config nokia770_lcd_config __initdata = {
+	.ctrl_name	= "hwa742",
+};
+
+static void __init mipid_dev_init(void)
+{
+	nokia770_mipid_platform_data.nreset_gpio = 13;
+	nokia770_mipid_platform_data.data_lines = 16;
+
+	omapfb_set_lcd_config(&nokia770_lcd_config);
+}
+
+static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = {
+	.x_max		= 0x0fff,
+	.y_max		= 0x0fff,
+	.x_plate_ohms	= 180,
+	.pressure_max	= 255,
+	.debounce_max	= 10,
+	.debounce_tol	= 3,
+	.debounce_rep	= 1,
+	.gpio_pendown	= ADS7846_PENDOWN_GPIO,
+};
+
+static struct spi_board_info nokia770_spi_board_info[] __initdata = {
+	[0] = {
+		.modalias       = "lcd_mipid",
+		.bus_num        = 2,
+		.chip_select    = 3,
+		.max_speed_hz   = 12000000,
+		.platform_data	= &nokia770_mipid_platform_data,
+	},
+	[1] = {
+		.modalias       = "ads7846",
+		.bus_num        = 2,
+		.chip_select    = 0,
+		.max_speed_hz   = 2500000,
+		.platform_data	= &nokia770_ads7846_platform_data,
+	},
+};
+
+static void __init hwa742_dev_init(void)
+{
+	clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL);
+}
+
+/* assume no Mini-AB port */
+
+static struct omap_usb_config nokia770_usb_config __initdata = {
+	.otg		= 1,
+	.register_host	= 1,
+	.register_dev	= 1,
+	.hmc_mode	= 16,
+	.pins[0]	= 6,
+	.extcon		= "tahvo-usb",
+};
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+#define NOKIA770_GPIO_MMC_POWER		41
+#define NOKIA770_GPIO_MMC_SWITCH	23
+
+static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on,
+				int vdd)
+{
+	gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on);
+	return 0;
+}
+
+static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
+{
+	return gpio_get_value(NOKIA770_GPIO_MMC_SWITCH);
+}
+
+static struct omap_mmc_platform_data nokia770_mmc2_data = {
+	.nr_slots                       = 1,
+	.max_freq                       = 12000000,
+	.slots[0]       = {
+		.set_power		= nokia770_mmc_set_power,
+		.get_cover_state	= nokia770_mmc_get_cover_state,
+		.ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
+		.name                   = "mmcblk",
+	},
+};
+
+static struct omap_mmc_platform_data *nokia770_mmc_data[OMAP16XX_NR_MMC];
+
+static void __init nokia770_mmc_init(void)
+{
+	int ret;
+
+	ret = gpio_request(NOKIA770_GPIO_MMC_POWER, "MMC power");
+	if (ret < 0)
+		return;
+	gpio_direction_output(NOKIA770_GPIO_MMC_POWER, 0);
+
+	ret = gpio_request(NOKIA770_GPIO_MMC_SWITCH, "MMC cover");
+	if (ret < 0) {
+		gpio_free(NOKIA770_GPIO_MMC_POWER);
+		return;
+	}
+	gpio_direction_input(NOKIA770_GPIO_MMC_SWITCH);
+
+	/* Only the second MMC controller is used */
+	nokia770_mmc_data[1] = &nokia770_mmc2_data;
+	omap1_init_mmc(nokia770_mmc_data, OMAP16XX_NR_MMC);
+}
+
+#else
+static inline void nokia770_mmc_init(void)
+{
+}
+#endif
+
+#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE)
+static struct i2c_cbus_platform_data nokia770_cbus_data = {
+	.clk_gpio = OMAP_MPUIO(9),
+	.dat_gpio = OMAP_MPUIO(10),
+	.sel_gpio = OMAP_MPUIO(11),
+};
+
+static struct platform_device nokia770_cbus_device = {
+	.name   = "i2c-cbus-gpio",
+	.id     = 2,
+	.dev    = {
+		.platform_data = &nokia770_cbus_data,
+	},
+};
+
+static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = {
+	{
+		I2C_BOARD_INFO("retu-mfd", 0x01),
+	},
+	{
+		I2C_BOARD_INFO("tahvo-mfd", 0x02),
+	},
+};
+
+static void __init nokia770_cbus_init(void)
+{
+	const int retu_irq_gpio = 62;
+	const int tahvo_irq_gpio = 40;
+
+	if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ"))
+		return;
+	if (gpio_request_one(tahvo_irq_gpio, GPIOF_IN, "Tahvo IRQ")) {
+		gpio_free(retu_irq_gpio);
+		return;
+	}
+	irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING);
+	irq_set_irq_type(gpio_to_irq(tahvo_irq_gpio), IRQ_TYPE_EDGE_RISING);
+	nokia770_i2c_board_info_2[0].irq = gpio_to_irq(retu_irq_gpio);
+	nokia770_i2c_board_info_2[1].irq = gpio_to_irq(tahvo_irq_gpio);
+	i2c_register_board_info(2, nokia770_i2c_board_info_2,
+				ARRAY_SIZE(nokia770_i2c_board_info_2));
+	platform_device_register(&nokia770_cbus_device);
+}
+#else /* CONFIG_I2C_CBUS_GPIO */
+static void __init nokia770_cbus_init(void)
+{
+}
+#endif /* CONFIG_I2C_CBUS_GPIO */
+
+static void __init omap_nokia770_init(void)
+{
+	/* On Nokia 770, the SleepX signal is masked with an
+	 * MPUIO line by default.  It has to be unmasked for it
+	 * to become functional */
+
+	/* SleepX mask direction */
+	omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
+	/* Unmask SleepX signal */
+	omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
+
+	platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
+	nokia770_spi_board_info[1].irq = gpio_to_irq(15);
+	spi_register_board_info(nokia770_spi_board_info,
+				ARRAY_SIZE(nokia770_spi_board_info));
+	omap_serial_init();
+	omap_register_i2c_bus(1, 100, NULL, 0);
+	hwa742_dev_init();
+	mipid_dev_init();
+	omap1_usb_init(&nokia770_usb_config);
+	nokia770_mmc_init();
+	nokia770_cbus_init();
+}
+
+MACHINE_START(NOKIA770, "Nokia 770")
+	.atag_offset	= 0x100,
+	.map_io		= omap16xx_map_io,
+	.init_early     = omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= omap_nokia770_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
new file mode 100644
index 000000000..7436d4cf6
--- /dev/null
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -0,0 +1,617 @@
+/*
+ * linux/arch/arm/mach-omap1/board-osk.c
+ *
+ * Board specific init for OMAP5912 OSK
+ *
+ * Written by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/smc91x.h>
+#include <linux/omapfb.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c/tps65010.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/omap1_bl.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/flash.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+
+#include <mach/hardware.h>
+#include <mach/usb.h>
+
+#include "common.h"
+
+/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
+#define OMAP_OSK_ETHR_START		0x04800300
+
+/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
+ * alternate pin configurations for hardware-controlled blinking.
+ */
+#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
+#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
+#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
+#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
+#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
+#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
+
+static struct mtd_partition osk_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	}, {
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	}, {
+	      .name		= "filesystem",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data osk_flash_data = {
+	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
+	.parts		= osk_partitions,
+	.nr_parts	= ARRAY_SIZE(osk_partitions),
+};
+
+static struct resource osk_flash_resource = {
+	/* this is on CS3, wherever it's mapped */
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device osk5912_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &osk_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &osk_flash_resource,
+};
+
+static struct smc91x_platdata osk5912_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
+static struct resource osk5912_smc91x_resources[] = {
+	[0] = {
+		.start	= OMAP_OSK_ETHR_START,		/* Physical */
+		.end	= OMAP_OSK_ETHR_START + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct platform_device osk5912_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &osk5912_smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(osk5912_smc91x_resources),
+	.resource	= osk5912_smc91x_resources,
+};
+
+static struct resource osk5912_cf_resources[] = {
+	[0] = {
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device osk5912_cf_device = {
+	.name		= "omap_cf",
+	.id		= -1,
+	.dev = {
+		.platform_data	= (void *) 2 /* CS2 */,
+	},
+	.num_resources	= ARRAY_SIZE(osk5912_cf_resources),
+	.resource	= osk5912_cf_resources,
+};
+
+static struct platform_device *osk5912_devices[] __initdata = {
+	&osk5912_flash_device,
+	&osk5912_smc91x_device,
+	&osk5912_cf_device,
+};
+
+static struct gpio_led tps_leds[] = {
+	/* NOTE:  D9 and D2 have hardware blink support.
+	 * Also, D9 requires non-battery power.
+	 */
+	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
+			.default_trigger = "ide-disk", },
+	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
+	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
+			.default_trigger = "heartbeat", },
+};
+
+static struct gpio_led_platform_data tps_leds_data = {
+	.num_leds	= 3,
+	.leds		= tps_leds,
+};
+
+static struct platform_device osk5912_tps_leds = {
+	.name			= "leds-gpio",
+	.id			= 0,
+	.dev.platform_data	= &tps_leds_data,
+};
+
+static int osk_tps_setup(struct i2c_client *client, void *context)
+{
+	if (!IS_BUILTIN(CONFIG_TPS65010))
+		return -ENOSYS;
+
+	/* Set GPIO 1 HIGH to disable VBUS power supply;
+	 * OHCI driver powers it up/down as needed.
+	 */
+	gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
+	gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);
+
+	/* Set GPIO 2 high so LED D3 is off by default */
+	tps65010_set_gpio_out_value(GPIO2, HIGH);
+
+	/* Set GPIO 3 low to take ethernet out of reset */
+	gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset");
+	gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0);
+
+	/* GPIO4 is VDD_DSP */
+	gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power");
+	gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1);
+	/* REVISIT if DSP support isn't configured, power it off ... */
+
+	/* Let LED1 (D9) blink; leds-gpio may override it */
+	tps65010_set_led(LED1, BLINK);
+
+	/* Set LED2 off by default */
+	tps65010_set_led(LED2, OFF);
+
+	/* Enable LOW_PWR handshake */
+	tps65010_set_low_pwr(ON);
+
+	/* Switch VLDO2 to 3.0V for AIC23 */
+	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V
+			| TPS_LDO1_ENABLE);
+
+	/* register these three LEDs */
+	osk5912_tps_leds.dev.parent = &client->dev;
+	platform_device_register(&osk5912_tps_leds);
+
+	return 0;
+}
+
+static struct tps65010_board tps_board = {
+	.base		= OSK_TPS_GPIO_BASE,
+	.outmask	= 0x0f,
+	.setup		= osk_tps_setup,
+};
+
+static struct i2c_board_info __initdata osk_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("tps65010", 0x48),
+		.platform_data	= &tps_board,
+
+	},
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1B),
+	},
+	/* TODO when driver support is ready:
+	 *  - optionally on Mistral, ov9640 camera sensor at 0x30
+	 */
+};
+
+static void __init osk_init_smc91x(void)
+{
+	u32 l;
+
+	if ((gpio_request(0, "smc_irq")) < 0) {
+		printk("Error requesting gpio 0 for smc91x irq\n");
+		return;
+	}
+
+	/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
+	l = omap_readl(EMIFS_CCS(1));
+	l |= 0x3;
+	omap_writel(l, EMIFS_CCS(1));
+}
+
+static void __init osk_init_cf(void)
+{
+	omap_cfg_reg(M7_1610_GPIO62);
+	if ((gpio_request(62, "cf_irq")) < 0) {
+		printk("Error requesting gpio 62 for CF irq\n");
+		return;
+	}
+	/* the CF I/O IRQ is really active-low */
+	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
+}
+
+static struct omap_usb_config osk_usb_config __initdata = {
+	/* has usb host connector (A) ... for development it can also
+	 * be used, with a NONSTANDARD gender-bending cable/dongle, as
+	 * a peripheral.
+	 */
+#if IS_ENABLED(CONFIG_USB_OMAP)
+	.register_dev	= 1,
+	.hmc_mode	= 0,
+#else
+	.register_host	= 1,
+	.hmc_mode	= 16,
+	.rwc		= 1,
+#endif
+	.pins[0]	= 2,
+};
+
+#ifdef	CONFIG_OMAP_OSK_MISTRAL
+static struct omap_lcd_config osk_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+#endif
+
+#ifdef	CONFIG_OMAP_OSK_MISTRAL
+
+#include <linux/input.h>
+#include <linux/platform_data/at24.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <linux/platform_data/keypad-omap.h>
+
+static struct at24_platform_data at24c04 = {
+	.byte_len	= SZ_4K / 8,
+	.page_size	= 16,
+};
+
+static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
+	{
+		/* NOTE:  powered from LCD supply */
+		I2C_BOARD_INFO("24c04", 0x50),
+		.platform_data	= &at24c04,
+	},
+	/* TODO when driver support is ready:
+	 *  - optionally ov9640 camera sensor at 0x30
+	 */
+};
+
+static const unsigned int osk_keymap[] = {
+	/* KEY(col, row, code) */
+	KEY(0, 0, KEY_F1),		/* SW4 */
+	KEY(3, 0, KEY_UP),		/* (sw2/up) */
+	KEY(1, 1, KEY_LEFTCTRL),	/* SW5 */
+	KEY(2, 1, KEY_LEFT),		/* (sw2/left) */
+	KEY(0, 2, KEY_SPACE),		/* SW3 */
+	KEY(1, 2, KEY_ESC),		/* SW6 */
+	KEY(2, 2, KEY_DOWN),		/* (sw2/down) */
+	KEY(2, 3, KEY_ENTER),		/* (sw2/select) */
+	KEY(3, 3, KEY_RIGHT),		/* (sw2/right) */
+};
+
+static const struct matrix_keymap_data osk_keymap_data = {
+	.keymap		= osk_keymap,
+	.keymap_size	= ARRAY_SIZE(osk_keymap),
+};
+
+static struct omap_kp_platform_data osk_kp_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap_data	= &osk_keymap_data,
+	.delay		= 9,
+};
+
+static struct resource osk5912_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device osk5912_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &osk_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(osk5912_kp_resources),
+	.resource	= osk5912_kp_resources,
+};
+
+static struct omap_backlight_config mistral_bl_data = {
+	.default_intensity	= 0xa0,
+};
+
+static struct platform_device mistral_bl_device = {
+	.name		= "omap-bl",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &mistral_bl_data,
+	},
+};
+
+static struct platform_device osk5912_lcd_device = {
+	.name		= "lcd_osk",
+	.id		= -1,
+};
+
+static struct gpio_led mistral_gpio_led_pins[] = {
+	{
+		.name		= "mistral:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "mistral:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data mistral_gpio_led_data = {
+	.leds		= mistral_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(mistral_gpio_led_pins),
+};
+
+static struct platform_device mistral_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &mistral_gpio_led_data,
+	},
+};
+
+static struct platform_device *mistral_devices[] __initdata = {
+	&osk5912_kp_device,
+	&mistral_bl_device,
+	&osk5912_lcd_device,
+	&mistral_gpio_leds,
+};
+
+static int mistral_get_pendown_state(void)
+{
+	return !gpio_get_value(4);
+}
+
+static const struct ads7846_platform_data mistral_ts_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.get_pendown_state	= mistral_get_pendown_state,
+};
+
+static struct spi_board_info __initdata mistral_boardinfo[] = { {
+	/* MicroWire (bus 2) CS0 has an ads7846e */
+	.modalias		= "ads7846",
+	.platform_data		= &mistral_ts_info,
+	.max_speed_hz		= 120000 /* max sample rate at 3V */
+					* 26 /* command + data + overhead */,
+	.bus_num		= 2,
+	.chip_select		= 0,
+} };
+
+#ifdef	CONFIG_PM
+static irqreturn_t
+osk_mistral_wake_interrupt(int irq, void *ignored)
+{
+	return IRQ_HANDLED;
+}
+#endif
+
+static void __init osk_mistral_init(void)
+{
+	/* NOTE:  we could actually tell if there's a Mistral board
+	 * attached, e.g. by trying to read something from the ads7846.
+	 * But this arch_init() code is too early for that, since we
+	 * can't talk to the ads or even the i2c eeprom.
+	 */
+
+	/* parallel camera interface */
+	omap_cfg_reg(J15_1610_CAM_LCLK);
+	omap_cfg_reg(J18_1610_CAM_D7);
+	omap_cfg_reg(J19_1610_CAM_D6);
+	omap_cfg_reg(J14_1610_CAM_D5);
+	omap_cfg_reg(K18_1610_CAM_D4);
+	omap_cfg_reg(K19_1610_CAM_D3);
+	omap_cfg_reg(K15_1610_CAM_D2);
+	omap_cfg_reg(K14_1610_CAM_D1);
+	omap_cfg_reg(L19_1610_CAM_D0);
+	omap_cfg_reg(L18_1610_CAM_VS);
+	omap_cfg_reg(L15_1610_CAM_HS);
+	omap_cfg_reg(M19_1610_CAM_RSTZ);
+	omap_cfg_reg(Y15_1610_CAM_OUTCLK);
+
+	/* serial camera interface */
+	omap_cfg_reg(H19_1610_CAM_EXCLK);
+	omap_cfg_reg(W13_1610_CCP_CLKM);
+	omap_cfg_reg(Y12_1610_CCP_CLKP);
+	/* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
+	/* omap_cfg_reg(Y14_1610_CCP_DATAM); */
+	omap_cfg_reg(W14_1610_CCP_DATAP);
+
+	/* CAM_PWDN */
+	if (gpio_request(11, "cam_pwdn") == 0) {
+		omap_cfg_reg(N20_1610_GPIO11);
+		gpio_direction_output(11, 0);
+	} else
+		pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
+
+
+	/* omap_cfg_reg(P19_1610_GPIO6); */	/* BUSY */
+	gpio_request(6, "ts_busy");
+	gpio_direction_input(6);
+
+	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
+	gpio_request(4, "ts_int");
+	gpio_direction_input(4);
+	irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
+
+	mistral_boardinfo[0].irq = gpio_to_irq(4);
+	spi_register_board_info(mistral_boardinfo,
+			ARRAY_SIZE(mistral_boardinfo));
+
+	/* the sideways button (SW1) is for use as a "wakeup" button
+	 *
+	 * NOTE:  The Mistral board has the wakeup button (SW1) wired
+	 * to the LCD 3.3V rail, which is powered down during suspend.
+	 * To allow this button to wake up the omap, work around this
+	 * HW bug by rewiring SW1 to use the main 3.3V rail.
+	 */
+	omap_cfg_reg(N15_1610_MPUIO2);
+	if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) {
+		int ret = 0;
+		int irq = gpio_to_irq(OMAP_MPUIO(2));
+
+		gpio_direction_input(OMAP_MPUIO(2));
+		irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+#ifdef	CONFIG_PM
+		/* share the IRQ in case someone wants to use the
+		 * button for more than wakeup from system sleep.
+		 */
+		ret = request_irq(irq,
+				&osk_mistral_wake_interrupt,
+				IRQF_SHARED, "mistral_wakeup",
+				&osk_mistral_wake_interrupt);
+		if (ret != 0) {
+			gpio_free(OMAP_MPUIO(2));
+			printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
+				ret);
+		} else
+			enable_irq_wake(irq);
+#endif
+	} else
+		printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
+
+	/* LCD:  backlight, and power; power controls other devices on the
+	 * board, like the touchscreen, EEPROM, and wakeup (!) switch.
+	 */
+	omap_cfg_reg(PWL);
+	if (gpio_request(2, "lcd_pwr") == 0)
+		gpio_direction_output(2, 1);
+
+	/*
+	 * GPIO based LEDs
+	 */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
+	i2c_register_board_info(1, mistral_i2c_board_info,
+			ARRAY_SIZE(mistral_i2c_board_info));
+
+	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
+}
+#else
+static void __init osk_mistral_init(void) { }
+#endif
+
+#define EMIFS_CS3_VAL	(0x88013141)
+
+static void __init osk_init(void)
+{
+	u32 l;
+
+	osk_init_smc91x();
+	osk_init_cf();
+
+	/* Workaround for wrong CS3 (NOR flash) timing
+	 * There are some U-Boot versions out there which configure
+	 * wrong CS3 memory timings. This mainly leads to CRC
+	 * or similar errors if you use NOR flash (e.g. with JFFS2)
+	 */
+	l = omap_readl(EMIFS_CCS(3));
+	if (l != EMIFS_CS3_VAL)
+		omap_writel(EMIFS_CS3_VAL, EMIFS_CCS(3));
+
+	osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
+	osk_flash_resource.end += SZ_32M - 1;
+	osk5912_smc91x_resources[1].start = gpio_to_irq(0);
+	osk5912_smc91x_resources[1].end = gpio_to_irq(0);
+	osk5912_cf_resources[0].start = gpio_to_irq(62);
+	osk5912_cf_resources[0].end = gpio_to_irq(62);
+	platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
+
+	l = omap_readl(USB_TRANSCEIVER_CTRL);
+	l |= (3 << 1);
+	omap_writel(l, USB_TRANSCEIVER_CTRL);
+
+	omap1_usb_init(&osk_usb_config);
+
+	/* irq for tps65010 chip */
+	/* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */
+	if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0)
+		gpio_direction_input(OMAP_MPUIO(1));
+
+	omap_serial_init();
+	osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1));
+	omap_register_i2c_bus(1, 400, osk_i2c_board_info,
+			      ARRAY_SIZE(osk_i2c_board_info));
+	osk_mistral_init();
+
+#ifdef	CONFIG_OMAP_OSK_MISTRAL
+	omapfb_set_lcd_config(&osk_lcd_config);
+#endif
+
+}
+
+MACHINE_START(OMAP_OSK, "TI-OSK")
+	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
+	.atag_offset	= 0x100,
+	.map_io		= omap16xx_map_io,
+	.init_early	= omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= osk_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
new file mode 100644
index 000000000..3b8e98f43
--- /dev/null
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -0,0 +1,242 @@
+/*
+ * linux/arch/arm/mach-omap1/board-palmte.c
+ *
+ * Modified from board-generic.c
+ *
+ * Support for the Palm Tungsten E PDA.
+ *
+ * Original version : Laurent Gonzalez
+ *
+ * Maintainers : http://palmtelinux.sf.net
+ *                palmtelinux-developpers@lists.sf.net
+ *
+ * Copyright (c) 2006 Andrzej Zaborowski  <balrog@zabor.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+#include <linux/apm-emulation.h>
+#include <linux/omapfb.h>
+#include <linux/platform_data/omap1_bl.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/flash.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <linux/omap-dma.h>
+#include <linux/platform_data/keypad-omap.h>
+
+#include <mach/hardware.h>
+#include <mach/usb.h>
+
+#include "common.h"
+
+#define PALMTE_USBDETECT_GPIO	0
+#define PALMTE_USB_OR_DC_GPIO	1
+#define PALMTE_TSC_GPIO		4
+#define PALMTE_PINTDAV_GPIO	6
+#define PALMTE_MMC_WP_GPIO	8
+#define PALMTE_MMC_POWER_GPIO	9
+#define PALMTE_HDQ_GPIO		11
+#define PALMTE_HEADPHONES_GPIO	14
+#define PALMTE_SPEAKER_GPIO	15
+#define PALMTE_DC_GPIO		OMAP_MPUIO(2)
+#define PALMTE_MMC_SWITCH_GPIO	OMAP_MPUIO(4)
+#define PALMTE_MMC1_GPIO	OMAP_MPUIO(6)
+#define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
+#define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
+
+static const unsigned int palmte_keymap[] = {
+	KEY(0, 0, KEY_F1),		/* Calendar */
+	KEY(1, 0, KEY_F2),		/* Contacts */
+	KEY(2, 0, KEY_F3),		/* Tasks List */
+	KEY(3, 0, KEY_F4),		/* Note Pad */
+	KEY(4, 0, KEY_POWER),
+	KEY(0, 1, KEY_LEFT),
+	KEY(1, 1, KEY_DOWN),
+	KEY(2, 1, KEY_UP),
+	KEY(3, 1, KEY_RIGHT),
+	KEY(4, 1, KEY_ENTER),
+};
+
+static const struct matrix_keymap_data palmte_keymap_data = {
+	.keymap		= palmte_keymap,
+	.keymap_size	= ARRAY_SIZE(palmte_keymap),
+};
+
+static struct omap_kp_platform_data palmte_kp_data = {
+	.rows	= 8,
+	.cols	= 8,
+	.keymap_data = &palmte_keymap_data,
+	.rep	= true,
+	.delay	= 12,
+};
+
+static struct resource palmte_kp_resources[] = {
+	[0]	= {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device palmte_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmte_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(palmte_kp_resources),
+	.resource	= palmte_kp_resources,
+};
+
+static struct mtd_partition palmte_rom_partitions[] = {
+	/* PalmOS "Small ROM", contains the bootloader and the debugger */
+	{
+		.name		= "smallrom",
+		.offset		= 0,
+		.size		= 0xa000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	/* PalmOS "Big ROM", a filesystem with all the OS code and data */
+	{
+		.name		= "bigrom",
+		.offset		= SZ_128K,
+		/*
+		 * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
+		 * 0x7b0000 bytes in the English-only ("enUS") version.
+		 */
+		.size		= 0x7b0000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data palmte_rom_data = {
+	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
+	.parts		= palmte_rom_partitions,
+	.nr_parts	= ARRAY_SIZE(palmte_rom_partitions),
+};
+
+static struct resource palmte_rom_resource = {
+	.start		= OMAP_CS0_PHYS,
+	.end		= OMAP_CS0_PHYS + SZ_8M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device palmte_rom_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmte_rom_data,
+	},
+	.num_resources	= 1,
+	.resource	= &palmte_rom_resource,
+};
+
+static struct platform_device palmte_lcd_device = {
+	.name		= "lcd_palmte",
+	.id		= -1,
+};
+
+static struct omap_backlight_config palmte_backlight_config = {
+	.default_intensity	= 0xa0,
+};
+
+static struct platform_device palmte_backlight_device = {
+	.name		= "omap-bl",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmte_backlight_config,
+	},
+};
+
+static struct platform_device *palmte_devices[] __initdata = {
+	&palmte_rom_device,
+	&palmte_kp_device,
+	&palmte_lcd_device,
+	&palmte_backlight_device,
+};
+
+static struct omap_usb_config palmte_usb_config __initdata = {
+	.register_dev	= 1,	/* Mini-B only receptacle */
+	.hmc_mode	= 0,
+	.pins[0]	= 2,
+};
+
+static struct omap_lcd_config palmte_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct spi_board_info palmte_spi_info[] __initdata = {
+	{
+		.modalias	= "tsc2102",
+		.bus_num	= 2,	/* uWire (officially) */
+		.chip_select	= 0,	/* As opposed to 3 */
+		.max_speed_hz	= 8000000,
+	},
+};
+
+static void __init palmte_misc_gpio_setup(void)
+{
+	/* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */
+	if (gpio_request(PALMTE_PINTDAV_GPIO, "TSC2102 PINTDAV") < 0) {
+		printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
+		return;
+	}
+	gpio_direction_input(PALMTE_PINTDAV_GPIO);
+
+	/* Set USB-or-DC-IN pin as input (unused) */
+	if (gpio_request(PALMTE_USB_OR_DC_GPIO, "USB/DC-IN") < 0) {
+		printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
+		return;
+	}
+	gpio_direction_input(PALMTE_USB_OR_DC_GPIO);
+}
+
+static void __init omap_palmte_init(void)
+{
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
+	platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices));
+
+	palmte_spi_info[0].irq = gpio_to_irq(PALMTE_PINTDAV_GPIO);
+	spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info));
+	palmte_misc_gpio_setup();
+	omap_serial_init();
+	omap1_usb_init(&palmte_usb_config);
+	omap_register_i2c_bus(1, 100, NULL, 0);
+
+	omapfb_set_lcd_config(&palmte_lcd_config);
+}
+
+MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
+	.atag_offset	= 0x100,
+	.map_io		= omap15xx_map_io,
+	.init_early     = omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= omap_palmte_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
new file mode 100644
index 000000000..ca5012088
--- /dev/null
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -0,0 +1,289 @@
+/*
+ * linux/arch/arm/mach-omap1/board-palmtt.c
+ *
+ * Modified from board-palmtt2.c
+ *
+ * Modified and amended for Palm Tungsten|T
+ * by Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/notifier.h>
+#include <linux/clk.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/leds.h>
+#include <linux/omapfb.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/platform_data/omap1_bl.h>
+#include <linux/platform_data/leds-omap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/flash.h>
+#include <mach/mux.h>
+#include <linux/omap-dma.h>
+#include <mach/tc.h>
+#include <linux/platform_data/keypad-omap.h>
+
+#include <mach/hardware.h>
+#include <mach/usb.h>
+
+#include "common.h"
+
+#define PALMTT_USBDETECT_GPIO	0
+#define PALMTT_CABLE_GPIO	1
+#define PALMTT_LED_GPIO		3
+#define PALMTT_PENIRQ_GPIO	6
+#define PALMTT_MMC_WP_GPIO	8
+#define PALMTT_HDQ_GPIO		11
+
+static const unsigned int palmtt_keymap[] = {
+	KEY(0, 0, KEY_ESC),
+	KEY(1, 0, KEY_SPACE),
+	KEY(2, 0, KEY_LEFTCTRL),
+	KEY(3, 0, KEY_TAB),
+	KEY(4, 0, KEY_ENTER),
+	KEY(0, 1, KEY_LEFT),
+	KEY(1, 1, KEY_DOWN),
+	KEY(2, 1, KEY_UP),
+	KEY(3, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_SLEEP),
+	KEY(4, 2, KEY_Y),
+};
+
+static struct mtd_partition palmtt_partitions[] = {
+	{
+		.name		= "write8k",
+		.offset		= 0,
+		.size		= SZ_8K,
+		.mask_flags	= 0,
+	},
+	{
+		.name		= "PalmOS-BootLoader(ro)",
+		.offset		= SZ_8K,
+		.size		= 7 * SZ_8K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "u-boot",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * SZ_8K,
+		.mask_flags	= 0,
+	},
+	{
+		.name		= "PalmOS-FS(ro)",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 7 * SZ_1M + 4 * SZ_64K - 16 * SZ_8K,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "u-boot(rez)",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= 0
+	},
+	{
+		.name		= "empty",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data palmtt_flash_data = {
+	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
+	.parts		= palmtt_partitions,
+	.nr_parts	= ARRAY_SIZE(palmtt_partitions),
+};
+
+static struct resource palmtt_flash_resource = {
+	.start		= OMAP_CS0_PHYS,
+	.end		= OMAP_CS0_PHYS + SZ_8M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device palmtt_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &palmtt_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &palmtt_flash_resource,
+};
+
+static struct resource palmtt_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct matrix_keymap_data palmtt_keymap_data = {
+	.keymap		= palmtt_keymap,
+	.keymap_size	= ARRAY_SIZE(palmtt_keymap),
+};
+
+static struct omap_kp_platform_data palmtt_kp_data = {
+	.rows	= 6,
+	.cols	= 3,
+	.keymap_data = &palmtt_keymap_data,
+};
+
+static struct platform_device palmtt_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &palmtt_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(palmtt_kp_resources),
+	.resource	= palmtt_kp_resources,
+};
+
+static struct platform_device palmtt_lcd_device = {
+	.name		= "lcd_palmtt",
+	.id		= -1,
+};
+
+static struct platform_device palmtt_spi_device = {
+	.name		= "spi_palmtt",
+	.id		= -1,
+};
+
+static struct omap_backlight_config palmtt_backlight_config = {
+	.default_intensity	= 0xa0,
+};
+
+static struct platform_device palmtt_backlight_device = {
+	.name		= "omap-bl",
+	.id		= -1,
+	.dev		= {
+		.platform_data= &palmtt_backlight_config,
+	},
+};
+
+static struct omap_led_config palmtt_led_config[] = {
+	{
+		.cdev	= {
+			.name	= "palmtt:led0",
+		},
+		.gpio	= PALMTT_LED_GPIO,
+	},
+};
+
+static struct omap_led_platform_data palmtt_led_data = {
+	.nr_leds	= ARRAY_SIZE(palmtt_led_config),
+	.leds		= palmtt_led_config,
+};
+
+static struct platform_device palmtt_led_device = {
+	.name	= "omap-led",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmtt_led_data,
+	},
+};
+
+static struct platform_device *palmtt_devices[] __initdata = {
+	&palmtt_flash_device,
+	&palmtt_kp_device,
+	&palmtt_lcd_device,
+	&palmtt_spi_device,
+	&palmtt_backlight_device,
+	&palmtt_led_device,
+};
+
+static int palmtt_get_pendown_state(void)
+{
+	return !gpio_get_value(6);
+}
+
+static const struct ads7846_platform_data palmtt_ts_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.get_pendown_state	= palmtt_get_pendown_state,
+};
+
+static struct spi_board_info __initdata palmtt_boardinfo[] = {
+	{
+		/* MicroWire (bus 2) CS0 has an ads7846e */
+		.modalias	= "ads7846",
+		.platform_data	= &palmtt_ts_info,
+		.max_speed_hz	= 120000	/* max sample rate at 3V */
+					* 26	/* command + data + overhead */,
+		.bus_num	= 2,
+		.chip_select	= 0,
+	}
+};
+
+static struct omap_usb_config palmtt_usb_config __initdata = {
+	.register_dev	= 1,
+	.hmc_mode	= 0,
+	.pins[0]	= 2,
+};
+
+static struct omap_lcd_config palmtt_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static void __init omap_mpu_wdt_mode(int mode) {
+	if (mode)
+		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
+	else {
+		omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
+		omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
+	}
+}
+
+static void __init omap_palmtt_init(void)
+{
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
+	omap_mpu_wdt_mode(0);
+
+	platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices));
+
+	palmtt_boardinfo[0].irq = gpio_to_irq(6);
+	spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo));
+	omap_serial_init();
+	omap1_usb_init(&palmtt_usb_config);
+	omap_register_i2c_bus(1, 100, NULL, 0);
+
+	omapfb_set_lcd_config(&palmtt_lcd_config);
+}
+
+MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
+	.atag_offset	= 0x100,
+	.map_io		= omap15xx_map_io,
+	.init_early     = omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= omap_palmtt_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
new file mode 100644
index 000000000..470e12d67
--- /dev/null
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -0,0 +1,304 @@
+/*
+ * linux/arch/arm/mach-omap1/board-palmz71.c
+ *
+ * Modified from board-generic.c
+ *
+ * Support for the Palm Zire71 PDA.
+ *
+ * Original version : Laurent Gonzalez
+ *
+ * Modified for zire71 : Marek Vasut
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/notifier.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/omapfb.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/platform_data/omap1_bl.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/flash.h>
+#include <mach/mux.h>
+#include <linux/omap-dma.h>
+#include <mach/tc.h>
+#include <linux/platform_data/keypad-omap.h>
+
+#include <mach/hardware.h>
+#include <mach/usb.h>
+
+#include "common.h"
+
+#define PALMZ71_USBDETECT_GPIO	0
+#define PALMZ71_PENIRQ_GPIO	6
+#define PALMZ71_MMC_WP_GPIO	8
+#define PALMZ71_HDQ_GPIO 	11
+
+#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
+#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
+#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
+#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
+
+static const unsigned int palmz71_keymap[] = {
+	KEY(0, 0, KEY_F1),
+	KEY(1, 0, KEY_F2),
+	KEY(2, 0, KEY_F3),
+	KEY(3, 0, KEY_F4),
+	KEY(4, 0, KEY_POWER),
+	KEY(0, 1, KEY_LEFT),
+	KEY(1, 1, KEY_DOWN),
+	KEY(2, 1, KEY_UP),
+	KEY(3, 1, KEY_RIGHT),
+	KEY(4, 1, KEY_ENTER),
+	KEY(0, 2, KEY_CAMERA),
+};
+
+static const struct matrix_keymap_data palmz71_keymap_data = {
+	.keymap		= palmz71_keymap,
+	.keymap_size	= ARRAY_SIZE(palmz71_keymap),
+};
+
+static struct omap_kp_platform_data palmz71_kp_data = {
+	.rows	= 8,
+	.cols	= 8,
+	.keymap_data	= &palmz71_keymap_data,
+	.rep	= true,
+	.delay	= 80,
+};
+
+static struct resource palmz71_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device palmz71_kp_device = {
+	.name	= "omap-keypad",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmz71_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(palmz71_kp_resources),
+	.resource	= palmz71_kp_resources,
+};
+
+static struct mtd_partition palmz71_rom_partitions[] = {
+	/* PalmOS "Small ROM", contains the bootloader and the debugger */
+	{
+		.name		= "smallrom",
+		.offset		= 0,
+		.size		= 0xa000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	/* PalmOS "Big ROM", a filesystem with all the OS code and data */
+	{
+		.name	= "bigrom",
+		.offset	= SZ_128K,
+		/*
+		 * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
+		 * 0x7b0000 bytes in the English-only ("enUS") version.
+		 */
+		.size		= 0x7b0000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data palmz71_rom_data = {
+	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
+	.parts		= palmz71_rom_partitions,
+	.nr_parts	= ARRAY_SIZE(palmz71_rom_partitions),
+};
+
+static struct resource palmz71_rom_resource = {
+	.start	= OMAP_CS0_PHYS,
+	.end	= OMAP_CS0_PHYS + SZ_8M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device palmz71_rom_device = {
+	.name	= "physmap-flash",
+	.id	= -1,
+	.dev = {
+		.platform_data = &palmz71_rom_data,
+	},
+	.num_resources	= 1,
+	.resource	= &palmz71_rom_resource,
+};
+
+static struct platform_device palmz71_lcd_device = {
+	.name	= "lcd_palmz71",
+	.id	= -1,
+};
+
+static struct platform_device palmz71_spi_device = {
+	.name	= "spi_palmz71",
+	.id	= -1,
+};
+
+static struct omap_backlight_config palmz71_backlight_config = {
+	.default_intensity	= 0xa0,
+};
+
+static struct platform_device palmz71_backlight_device = {
+	.name	= "omap-bl",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmz71_backlight_config,
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&palmz71_rom_device,
+	&palmz71_kp_device,
+	&palmz71_lcd_device,
+	&palmz71_spi_device,
+	&palmz71_backlight_device,
+};
+
+static int
+palmz71_get_pendown_state(void)
+{
+	return !gpio_get_value(PALMZ71_PENIRQ_GPIO);
+}
+
+static const struct ads7846_platform_data palmz71_ts_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.get_pendown_state	= palmz71_get_pendown_state,
+};
+
+static struct spi_board_info __initdata palmz71_boardinfo[] = { {
+	/* MicroWire (bus 2) CS0 has an ads7846e */
+	.modalias	= "ads7846",
+	.platform_data	= &palmz71_ts_info,
+	.max_speed_hz	= 120000	/* max sample rate at 3V */
+				* 26	/* command + data + overhead */,
+	.bus_num	= 2,
+	.chip_select	= 0,
+} };
+
+static struct omap_usb_config palmz71_usb_config __initdata = {
+	.register_dev	= 1,	/* Mini-B only receptacle */
+	.hmc_mode	= 0,
+	.pins[0]	= 2,
+};
+
+static struct omap_lcd_config palmz71_lcd_config __initdata = {
+	.ctrl_name = "internal",
+};
+
+static irqreturn_t
+palmz71_powercable(int irq, void *dev_id)
+{
+	if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) {
+		printk(KERN_INFO "PM: Power cable connected\n");
+		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
+				 IRQ_TYPE_EDGE_FALLING);
+	} else {
+		printk(KERN_INFO "PM: Power cable disconnected\n");
+		irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
+				 IRQ_TYPE_EDGE_RISING);
+	}
+	return IRQ_HANDLED;
+}
+
+static void __init
+omap_mpu_wdt_mode(int mode)
+{
+	if (mode)
+		omap_writew(0x8000, OMAP_WDT_TIMER_MODE);
+	else {
+		omap_writew(0x00f5, OMAP_WDT_TIMER_MODE);
+		omap_writew(0x00a0, OMAP_WDT_TIMER_MODE);
+	}
+}
+
+static void __init
+palmz71_gpio_setup(int early)
+{
+	if (early) {
+		/* Only set GPIO1 so we have a working serial */
+		gpio_direction_output(1, 1);
+	} else {
+		/* Set MMC/SD host WP pin as input */
+		if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) {
+			printk(KERN_ERR "Could not reserve WP GPIO!\n");
+			return;
+		}
+		gpio_direction_input(PALMZ71_MMC_WP_GPIO);
+
+		/* Monitor the Power-cable-connected signal */
+		if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) {
+			printk(KERN_ERR
+				"Could not reserve cable signal GPIO!\n");
+			return;
+		}
+		gpio_direction_input(PALMZ71_USBDETECT_GPIO);
+		if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
+				palmz71_powercable, 0, "palmz71-cable", NULL))
+			printk(KERN_ERR
+					"IRQ request for power cable failed!\n");
+		palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL);
+	}
+}
+
+static void __init
+omap_palmz71_init(void)
+{
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
+	palmz71_gpio_setup(1);
+	omap_mpu_wdt_mode(0);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO);
+	spi_register_board_info(palmz71_boardinfo,
+				ARRAY_SIZE(palmz71_boardinfo));
+	omap1_usb_init(&palmz71_usb_config);
+	omap_serial_init();
+	omap_register_i2c_bus(1, 100, NULL, 0);
+	palmz71_gpio_setup(0);
+
+	omapfb_set_lcd_config(&palmz71_lcd_config);
+}
+
+MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
+	.atag_offset	= 0x100,
+	.map_io		= omap15xx_map_io,
+	.init_early     = omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= omap_palmz71_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
new file mode 100644
index 000000000..8b2f7127f
--- /dev/null
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -0,0 +1,331 @@
+/*
+ * linux/arch/arm/mach-omap1/board-perseus2.c
+ *
+ * Modified from board-generic.c
+ *
+ * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
+ * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/smc91x.h>
+#include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/tc.h>
+#include <mach/mux.h>
+#include <mach/flash.h>
+
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+#include "fpga.h"
+
+static const unsigned int p2_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(2, 0, KEY_LEFT),
+	KEY(3, 0, KEY_DOWN),
+	KEY(4, 0, KEY_ENTER),
+	KEY(0, 1, KEY_F10),
+	KEY(1, 1, KEY_SEND),
+	KEY(2, 1, KEY_END),
+	KEY(3, 1, KEY_VOLUMEDOWN),
+	KEY(4, 1, KEY_VOLUMEUP),
+	KEY(5, 1, KEY_RECORD),
+	KEY(0, 2, KEY_F9),
+	KEY(1, 2, KEY_3),
+	KEY(2, 2, KEY_6),
+	KEY(3, 2, KEY_9),
+	KEY(4, 2, KEY_KPDOT),
+	KEY(0, 3, KEY_BACK),
+	KEY(1, 3, KEY_2),
+	KEY(2, 3, KEY_5),
+	KEY(3, 3, KEY_8),
+	KEY(4, 3, KEY_0),
+	KEY(5, 3, KEY_KPSLASH),
+	KEY(0, 4, KEY_HOME),
+	KEY(1, 4, KEY_1),
+	KEY(2, 4, KEY_4),
+	KEY(3, 4, KEY_7),
+	KEY(4, 4, KEY_KPASTERISK),
+	KEY(5, 4, KEY_POWER),
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
+		.end	= H2P2_DBG_FPGA_ETHR_START + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= INT_7XX_MPU_EXT_NIRQ,
+		.end	= 0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct mtd_partition nor_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	},
+	/* kernel */
+	{
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	},
+	/* rest of flash is a file system */
+	{
+	      .name		= "rootfs",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	},
+};
+
+static struct physmap_flash_data nor_data = {
+	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
+	.parts		= nor_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_partitions),
+};
+
+static struct resource nor_resource = {
+	.start		= OMAP_CS0_PHYS,
+	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device nor_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &nor_data,
+	},
+	.num_resources	= 1,
+	.resource	= &nor_resource,
+};
+
+#define P2_NAND_RB_GPIO_PIN	62
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
+}
+
+static struct platform_nand_data nand_data = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.options		= NAND_SAMSUNG_LP_OPTIONS,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= omap1_nand_cmd_ctl,
+		.dev_ready	= nand_dev_ready,
+	},
+};
+
+static struct resource nand_resource = {
+	.start		= OMAP_CS3_PHYS,
+	.end		= OMAP_CS3_PHYS + SZ_4K - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device nand_device = {
+	.name		= "gen_nand",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &nand_resource,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct resource kp_resources[] = {
+	[0] = {
+		.start	= INT_7XX_MPUIO_KEYPAD,
+		.end	= INT_7XX_MPUIO_KEYPAD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct matrix_keymap_data p2_keymap_data = {
+	.keymap		= p2_keymap,
+	.keymap_size	= ARRAY_SIZE(p2_keymap),
+};
+
+static struct omap_kp_platform_data kp_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap_data	= &p2_keymap_data,
+	.delay		= 4,
+	.dbounce	= true,
+};
+
+static struct platform_device kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(kp_resources),
+	.resource	= kp_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&nor_device,
+	&nand_device,
+	&smc91x_device,
+	&kp_device,
+};
+
+static struct omap_lcd_config perseus2_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static void __init perseus2_init_smc91x(void)
+{
+	__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+	__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+		   H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+}
+
+static void __init omap_perseus2_init(void)
+{
+	/* Early, board-dependent init */
+
+	/*
+	 * Hold GSM Reset until needed
+	 */
+	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
+
+	/*
+	 * UARTs -> done automagically by 8250 driver
+	 */
+
+	/*
+	 * CSx timings, GPIO Mux ... setup
+	 */
+
+	/* Flash: CS0 timings setup */
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
+
+	/*
+	 * Ethernet support through the debug board
+	 * CS1 timings setup
+	 */
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
+
+	/*
+	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+	 * It is used as the Ethernet controller interrupt
+	 */
+	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF,
+				OMAP7XX_IO_CONF_9);
+
+	perseus2_init_smc91x();
+
+	BUG_ON(gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0);
+	gpio_direction_input(P2_NAND_RB_GPIO_PIN);
+
+	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
+	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
+
+	/* Mux pins for keypad */
+	omap_cfg_reg(E2_7XX_KBR0);
+	omap_cfg_reg(J7_7XX_KBR1);
+	omap_cfg_reg(E1_7XX_KBR2);
+	omap_cfg_reg(F3_7XX_KBR3);
+	omap_cfg_reg(D2_7XX_KBR4);
+	omap_cfg_reg(C2_7XX_KBC0);
+	omap_cfg_reg(D3_7XX_KBC1);
+	omap_cfg_reg(E4_7XX_KBC2);
+	omap_cfg_reg(F4_7XX_KBC3);
+	omap_cfg_reg(E3_7XX_KBC4);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	omap_serial_init();
+	omap_register_i2c_bus(1, 100, NULL, 0);
+
+	omapfb_set_lcd_config(&perseus2_lcd_config);
+}
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc omap_perseus2_io_desc[] __initdata = {
+	{
+		.virtual	= H2P2_DBG_FPGA_BASE,
+		.pfn		= __phys_to_pfn(H2P2_DBG_FPGA_START),
+		.length		= H2P2_DBG_FPGA_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init omap_perseus2_map_io(void)
+{
+	omap7xx_map_io();
+	iotable_init(omap_perseus2_io_desc,
+		     ARRAY_SIZE(omap_perseus2_io_desc));
+}
+
+MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
+	/* Maintainer: Kevin Hilman <kjh@hilman.org> */
+	.atag_offset	= 0x100,
+	.map_io		= omap_perseus2_map_io,
+	.init_early     = omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= omap_perseus2_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
new file mode 100644
index 000000000..4fcf19c78
--- /dev/null
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -0,0 +1,67 @@
+/*
+ * linux/arch/arm/mach-omap1/board-sx1-mmc.c
+ *
+ * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
+ * Author: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
+ *
+ * This code is based on linux/arch/arm/mach-omap1/board-h2-mmc.c, which is:
+ * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/board-sx1.h>
+
+#include "mmc.h"
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static int mmc_set_power(struct device *dev, int slot, int power_on,
+				int vdd)
+{
+	int err;
+	u8 dat = 0;
+
+	err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
+	if (err < 0)
+		return err;
+
+	if (power_on)
+		dat |= SOFIA_MMC_POWER;
+	else
+		dat &= ~SOFIA_MMC_POWER;
+
+	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
+}
+
+/* Cover switch is at OMAP_MPUIO(3) */
+static struct omap_mmc_platform_data mmc1_data = {
+	.nr_slots                       = 1,
+	.slots[0]       = {
+		.set_power              = mmc_set_power,
+		.ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
+		.name                   = "mmcblk",
+	},
+};
+
+static struct omap_mmc_platform_data *mmc_data[OMAP15XX_NR_MMC];
+
+void __init sx1_mmc_init(void)
+{
+	mmc_data[0] = &mmc1_data;
+	omap1_init_mmc(mmc_data, OMAP15XX_NR_MMC);
+}
+
+#else
+
+void __init sx1_mmc_init(void)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
new file mode 100644
index 000000000..29e526235
--- /dev/null
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -0,0 +1,350 @@
+/*
+* linux/arch/arm/mach-omap1/board-sx1.c
+*
+* Modified from board-generic.c
+*
+* Support for the Siemens SX1 mobile phone.
+*
+* Original version : Vladimir Ananiev (Vovan888-at-gmail com)
+*
+* Maintainters : Vladimir Ananiev (aka Vovan888), Sergge
+*		oslik.ru
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License version 2 as
+* published by the Free Software Foundation.
+*/
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/notifier.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/types.h>
+#include <linux/i2c.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/omapfb.h>
+#include <linux/platform_data/keypad-omap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/flash.h>
+#include <mach/mux.h>
+#include <linux/omap-dma.h>
+#include <mach/tc.h>
+#include <mach/board-sx1.h>
+
+#include <mach/hardware.h>
+#include <mach/usb.h>
+
+#include "common.h"
+
+/* Write to I2C device */
+int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
+{
+	struct i2c_adapter *adap;
+	int err;
+	struct i2c_msg msg[1];
+	unsigned char data[2];
+
+	adap = i2c_get_adapter(0);
+	if (!adap)
+		return -ENODEV;
+	msg->addr = devaddr;	/* I2C address of chip */
+	msg->flags = 0;
+	msg->len = 2;
+	msg->buf = data;
+	data[0] = regoffset;	/* register num */
+	data[1] = value;		/* register data */
+	err = i2c_transfer(adap, msg, 1);
+	i2c_put_adapter(adap);
+	if (err >= 0)
+		return 0;
+	return err;
+}
+
+/* Read from I2C device */
+int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value)
+{
+	struct i2c_adapter *adap;
+	int err;
+	struct i2c_msg msg[1];
+	unsigned char data[2];
+
+	adap = i2c_get_adapter(0);
+	if (!adap)
+		return -ENODEV;
+
+	msg->addr = devaddr;	/* I2C address of chip */
+	msg->flags = 0;
+	msg->len = 1;
+	msg->buf = data;
+	data[0] = regoffset;	/* register num */
+	err = i2c_transfer(adap, msg, 1);
+
+	msg->addr = devaddr;	/* I2C address */
+	msg->flags = I2C_M_RD;
+	msg->len = 1;
+	msg->buf = data;
+	err = i2c_transfer(adap, msg, 1);
+	*value = data[0];
+	i2c_put_adapter(adap);
+
+	if (err >= 0)
+		return 0;
+	return err;
+}
+/* set keyboard backlight intensity */
+int sx1_setkeylight(u8 keylight)
+{
+	if (keylight > SOFIA_MAX_LIGHT_VAL)
+		keylight = SOFIA_MAX_LIGHT_VAL;
+	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
+}
+/* get current keylight intensity */
+int sx1_getkeylight(u8 * keylight)
+{
+	return sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
+}
+/* set LCD backlight intensity */
+int sx1_setbacklight(u8 backlight)
+{
+	if (backlight > SOFIA_MAX_LIGHT_VAL)
+		backlight = SOFIA_MAX_LIGHT_VAL;
+	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG,
+				  backlight);
+}
+/* get current LCD backlight intensity */
+int sx1_getbacklight (u8 * backlight)
+{
+	return sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG,
+				 backlight);
+}
+/* set LCD backlight power on/off */
+int sx1_setmmipower(u8 onoff)
+{
+	int err;
+	u8 dat = 0;
+	err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
+	if (err < 0)
+		return err;
+	if (onoff)
+		dat |= SOFIA_MMILIGHT_POWER;
+	else
+		dat &= ~SOFIA_MMILIGHT_POWER;
+	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
+}
+
+/* set USB power on/off */
+int sx1_setusbpower(u8 onoff)
+{
+	int err;
+	u8 dat = 0;
+	err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
+	if (err < 0)
+		return err;
+	if (onoff)
+		dat |= SOFIA_USB_POWER;
+	else
+		dat &= ~SOFIA_USB_POWER;
+	return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
+}
+
+EXPORT_SYMBOL(sx1_setkeylight);
+EXPORT_SYMBOL(sx1_getkeylight);
+EXPORT_SYMBOL(sx1_setbacklight);
+EXPORT_SYMBOL(sx1_getbacklight);
+EXPORT_SYMBOL(sx1_setmmipower);
+EXPORT_SYMBOL(sx1_setusbpower);
+
+/*----------- Keypad -------------------------*/
+
+static const unsigned int sx1_keymap[] = {
+	KEY(3, 5, GROUP_0 | 117), /* camera Qt::Key_F17 */
+	KEY(4, 0, GROUP_0 | 114), /* voice memo Qt::Key_F14 */
+	KEY(4, 1, GROUP_2 | 114), /* voice memo */
+	KEY(4, 2, GROUP_3 | 114), /* voice memo */
+	KEY(0, 0, GROUP_1 | KEY_F12),	/* red button Qt::Key_Hangup */
+	KEY(3, 4, GROUP_1 | KEY_LEFT),
+	KEY(3, 2, GROUP_1 | KEY_DOWN),
+	KEY(3, 1, GROUP_1 | KEY_RIGHT),
+	KEY(3, 0, GROUP_1 | KEY_UP),
+	KEY(3, 3, GROUP_1 | KEY_POWER), /* joystick press or Qt::Key_Select */
+	KEY(0, 5, GROUP_1 | KEY_1),
+	KEY(0, 4, GROUP_1 | KEY_2),
+	KEY(0, 3, GROUP_1 | KEY_3),
+	KEY(4, 3, GROUP_1 | KEY_4),
+	KEY(4, 4, GROUP_1 | KEY_5),
+	KEY(4, 5, GROUP_1 | KEY_KPASTERISK),/* "*" */
+	KEY(1, 4, GROUP_1 | KEY_6),
+	KEY(1, 5, GROUP_1 | KEY_7),
+	KEY(1, 3, GROUP_1 | KEY_8),
+	KEY(2, 3, GROUP_1 | KEY_9),
+	KEY(2, 5, GROUP_1 | KEY_0),
+	KEY(2, 4, GROUP_1 | 113), /* # F13 Toggle input method Qt::Key_F13 */
+	KEY(1, 0, GROUP_1 | KEY_F11),	/* green button Qt::Key_Call */
+	KEY(2, 1, GROUP_1 | KEY_YEN),	/* left soft Qt::Key_Context1 */
+	KEY(2, 2, GROUP_1 | KEY_F8),	/* right soft Qt::Key_Back */
+	KEY(1, 2, GROUP_1 | KEY_LEFTSHIFT), /* shift */
+	KEY(1, 1, GROUP_1 | KEY_BACKSPACE), /* C (clear) */
+	KEY(2, 0, GROUP_1 | KEY_F7),	/* menu Qt::Key_Menu */
+};
+
+static struct resource sx1_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct matrix_keymap_data sx1_keymap_data = {
+	.keymap		= sx1_keymap,
+	.keymap_size	= ARRAY_SIZE(sx1_keymap),
+};
+
+static struct omap_kp_platform_data sx1_kp_data = {
+	.rows		= 6,
+	.cols		= 6,
+	.keymap_data	= &sx1_keymap_data,
+	.delay	= 80,
+};
+
+static struct platform_device sx1_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &sx1_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(sx1_kp_resources),
+	.resource	= sx1_kp_resources,
+};
+
+/*----------- MTD -------------------------*/
+
+static struct mtd_partition sx1_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+		.name		= "bootloader",
+		.offset		= 0x01800000,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= 0,
+	},
+	/* kernel */
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_2M - 2 * SZ_128K,
+		.mask_flags	= 0
+	},
+	/* file system */
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data sx1_flash_data = {
+	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
+	.parts		= sx1_partitions,
+	.nr_parts	= ARRAY_SIZE(sx1_partitions),
+};
+
+/* MTD Intel 4000 flash - new flashes */
+static struct resource sx1_new_flash_resource = {
+	.start		= OMAP_CS0_PHYS,
+	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device sx1_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &sx1_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &sx1_new_flash_resource,
+};
+
+/*----------- USB -------------------------*/
+
+static struct omap_usb_config sx1_usb_config __initdata = {
+	.otg		= 0,
+	.register_dev	= 1,
+	.register_host	= 0,
+	.hmc_mode	= 0,
+	.pins[0]	= 2,
+	.pins[1]	= 0,
+	.pins[2]	= 0,
+};
+
+/*----------- LCD -------------------------*/
+
+static struct omap_lcd_config sx1_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+/*-----------------------------------------*/
+static struct platform_device *sx1_devices[] __initdata = {
+	&sx1_flash_device,
+	&sx1_kp_device,
+};
+
+/*-----------------------------------------*/
+
+static void __init omap_sx1_init(void)
+{
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
+	platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
+
+	omap_serial_init();
+	omap_register_i2c_bus(1, 100, NULL, 0);
+	omap1_usb_init(&sx1_usb_config);
+	sx1_mmc_init();
+
+	/* turn on USB power */
+	/* sx1_setusbpower(1); can't do it here because i2c is not ready */
+	gpio_request(1, "A_IRDA_OFF");
+	gpio_request(11, "A_SWITCH");
+	gpio_request(15, "A_USB_ON");
+	gpio_direction_output(1, 1);	/*A_IRDA_OFF = 1 */
+	gpio_direction_output(11, 0);	/*A_SWITCH = 0 */
+	gpio_direction_output(15, 0);	/*A_USB_ON = 0 */
+
+	omapfb_set_lcd_config(&sx1_lcd_config);
+}
+
+MACHINE_START(SX1, "OMAP310 based Siemens SX1")
+	.atag_offset	= 0x100,
+	.map_io		= omap15xx_map_io,
+	.init_early     = omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= omap_sx1_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
new file mode 100644
index 000000000..4677a9ccb
--- /dev/null
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -0,0 +1,295 @@
+/*
+ * linux/arch/arm/mach-omap1/board-voiceblue.c
+ *
+ * Modified from board-generic.c
+ *
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mtd/physmap.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/smc91x.h>
+#include <linux/export.h>
+#include <linux/reboot.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-voiceblue.h>
+#include <mach/flash.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+
+#include <mach/hardware.h>
+#include <mach/usb.h>
+
+#include "common.h"
+
+static struct plat_serial8250_port voiceblue_ports[] = {
+	{
+		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x40000),
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= 3686400,
+	},
+	{
+		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x50000),
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= 3686400,
+	},
+	{
+		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x60000),
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= 3686400,
+	},
+	{
+		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x70000),
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= 3686400,
+	},
+	{ },
+};
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM1,
+};
+
+static int __init ext_uart_init(void)
+{
+	if (!machine_is_voiceblue())
+		return -ENODEV;
+
+	voiceblue_ports[0].irq = gpio_to_irq(12);
+	voiceblue_ports[1].irq = gpio_to_irq(13);
+	voiceblue_ports[2].irq = gpio_to_irq(14);
+	voiceblue_ports[3].irq = gpio_to_irq(15);
+	serial_device.dev.platform_data = voiceblue_ports;
+	return platform_device_register(&serial_device);
+}
+arch_initcall(ext_uart_init);
+
+static struct physmap_flash_data voiceblue_flash_data = {
+	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
+};
+
+static struct resource voiceblue_flash_resource = {
+	.start	= OMAP_CS0_PHYS,
+	.end	= OMAP_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device voiceblue_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &voiceblue_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &voiceblue_flash_resource,
+};
+
+static struct smc91x_platdata voiceblue_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
+static struct resource voiceblue_smc91x_resources[] = {
+	[0] = {
+		.start	= OMAP_CS2_PHYS + 0x300,
+		.end	= OMAP_CS2_PHYS + 0x300 + 16,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct platform_device voiceblue_smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &voiceblue_smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(voiceblue_smc91x_resources),
+	.resource	= voiceblue_smc91x_resources,
+};
+
+static struct platform_device *voiceblue_devices[] __initdata = {
+	&voiceblue_flash_device,
+	&voiceblue_smc91x_device,
+};
+
+static struct omap_usb_config voiceblue_usb_config __initdata = {
+	.hmc_mode	= 3,
+	.register_host	= 1,
+	.register_dev   = 1,
+	.pins[0]	= 2,
+	.pins[1]	= 6,
+	.pins[2]	= 6,
+};
+
+#define MACHINE_PANICED		1
+#define MACHINE_REBOOTING	2
+#define MACHINE_REBOOT		4
+static unsigned long machine_state;
+
+static int panic_event(struct notifier_block *this, unsigned long event,
+	 void *ptr)
+{
+	if (test_and_set_bit(MACHINE_PANICED, &machine_state))
+		return NOTIFY_DONE;
+
+	/* Flash power LED */
+	omap_writeb(0x78, OMAP_LPG1_LCR);
+	omap_writeb(0x01, OMAP_LPG1_PMR);	/* Enable clock */
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block panic_block = {
+	.notifier_call	= panic_event,
+};
+
+static int __init voiceblue_setup(void)
+{
+	if (!machine_is_voiceblue())
+		return -ENODEV;
+
+	/* Setup panic notifier */
+	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
+
+	return 0;
+}
+postcore_initcall(voiceblue_setup);
+
+static int wdt_gpio_state;
+
+void voiceblue_wdt_enable(void)
+{
+	gpio_direction_output(0, 0);
+	gpio_set_value(0, 1);
+	gpio_set_value(0, 0);
+	wdt_gpio_state = 0;
+}
+
+void voiceblue_wdt_disable(void)
+{
+	gpio_set_value(0, 0);
+	gpio_set_value(0, 1);
+	gpio_set_value(0, 0);
+	gpio_direction_input(0);
+}
+
+void voiceblue_wdt_ping(void)
+{
+	if (test_bit(MACHINE_REBOOT, &machine_state))
+		return;
+
+	wdt_gpio_state = !wdt_gpio_state;
+	gpio_set_value(0, wdt_gpio_state);
+}
+
+static void voiceblue_restart(enum reboot_mode mode, const char *cmd)
+{
+	/*
+	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
+	 * "Global Software Reset Affects Traffic Controller Frequency".
+	 */
+	if (cpu_is_omap5912()) {
+		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
+		omap_writew(0x8, ARM_RSTCT1);
+	}
+
+	set_bit(MACHINE_REBOOT, &machine_state);
+	voiceblue_wdt_enable();
+	while (1) ;
+}
+
+EXPORT_SYMBOL(voiceblue_wdt_enable);
+EXPORT_SYMBOL(voiceblue_wdt_disable);
+EXPORT_SYMBOL(voiceblue_wdt_ping);
+
+static void __init voiceblue_init(void)
+{
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
+	/* Watchdog */
+	gpio_request(0, "Watchdog");
+	/* smc91x reset */
+	gpio_request(7, "SMC91x reset");
+	gpio_direction_output(7, 1);
+	udelay(2);	/* wait at least 100ns */
+	gpio_set_value(7, 0);
+	mdelay(50);	/* 50ms until PHY ready */
+	/* smc91x interrupt pin */
+	gpio_request(8, "SMC91x irq");
+	/* 16C554 reset*/
+	gpio_request(6, "16C554 reset");
+	gpio_direction_output(6, 0);
+	/* 16C554 interrupt pins */
+	gpio_request(12, "16C554 irq");
+	gpio_request(13, "16C554 irq");
+	gpio_request(14, "16C554 irq");
+	gpio_request(15, "16C554 irq");
+	irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
+	irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
+	irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
+	irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
+
+	voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
+	voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
+	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
+	omap_serial_init();
+	omap1_usb_init(&voiceblue_usb_config);
+	omap_register_i2c_bus(1, 100, NULL, 0);
+
+	/* There is a good chance board is going up, so enable power LED
+	 * (it is connected through invertor) */
+	omap_writeb(0x00, OMAP_LPG1_LCR);
+	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
+}
+
+MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
+	/* Maintainer: Ladislav Michl <michl@2n.cz> */
+	.atag_offset	= 0x100,
+	.map_io		= omap15xx_map_io,
+	.init_early     = omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= voiceblue_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= voiceblue_restart,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
new file mode 100644
index 000000000..4f5fd4a08
--- /dev/null
+++ b/arch/arm/mach-omap1/clock.c
@@ -0,0 +1,1104 @@
+/*
+ *  linux/arch/arm/mach-omap1/clock.c
+ *
+ *  Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ *  Modified to use omap shared clock framework by
+ *  Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+
+#include "soc.h"
+#include "iomap.h"
+#include "clock.h"
+#include "opp.h"
+#include "sram.h"
+
+__u32 arm_idlect1_mask;
+struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+static DEFINE_SPINLOCK(clockfw_lock);
+
+/*
+ * Omap1 specific clock functions
+ */
+
+unsigned long omap1_uart_recalc(struct clk *clk)
+{
+	unsigned int val = __raw_readl(clk->enable_reg);
+	return val & clk->enable_bit ? 48000000 : 12000000;
+}
+
+unsigned long omap1_sossi_recalc(struct clk *clk)
+{
+	u32 div = omap_readl(MOD_CONF_CTRL_1);
+
+	div = (div >> 17) & 0x7;
+	div++;
+
+	return clk->parent->rate / div;
+}
+
+static void omap1_clk_allow_idle(struct clk *clk)
+{
+	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
+
+	if (!(clk->flags & CLOCK_IDLE_CONTROL))
+		return;
+
+	if (iclk->no_idle_count > 0 && !(--iclk->no_idle_count))
+		arm_idlect1_mask |= 1 << iclk->idlect_shift;
+}
+
+static void omap1_clk_deny_idle(struct clk *clk)
+{
+	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
+
+	if (!(clk->flags & CLOCK_IDLE_CONTROL))
+		return;
+
+	if (iclk->no_idle_count++ == 0)
+		arm_idlect1_mask &= ~(1 << iclk->idlect_shift);
+}
+
+static __u16 verify_ckctl_value(__u16 newval)
+{
+	/* This function checks for following limitations set
+	 * by the hardware (all conditions must be true):
+	 * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
+	 * ARM_CK >= TC_CK
+	 * DSP_CK >= TC_CK
+	 * DSPMMU_CK >= TC_CK
+	 *
+	 * In addition following rules are enforced:
+	 * LCD_CK <= TC_CK
+	 * ARMPER_CK <= TC_CK
+	 *
+	 * However, maximum frequencies are not checked for!
+	 */
+	__u8 per_exp;
+	__u8 lcd_exp;
+	__u8 arm_exp;
+	__u8 dsp_exp;
+	__u8 tc_exp;
+	__u8 dspmmu_exp;
+
+	per_exp = (newval >> CKCTL_PERDIV_OFFSET) & 3;
+	lcd_exp = (newval >> CKCTL_LCDDIV_OFFSET) & 3;
+	arm_exp = (newval >> CKCTL_ARMDIV_OFFSET) & 3;
+	dsp_exp = (newval >> CKCTL_DSPDIV_OFFSET) & 3;
+	tc_exp = (newval >> CKCTL_TCDIV_OFFSET) & 3;
+	dspmmu_exp = (newval >> CKCTL_DSPMMUDIV_OFFSET) & 3;
+
+	if (dspmmu_exp < dsp_exp)
+		dspmmu_exp = dsp_exp;
+	if (dspmmu_exp > dsp_exp+1)
+		dspmmu_exp = dsp_exp+1;
+	if (tc_exp < arm_exp)
+		tc_exp = arm_exp;
+	if (tc_exp < dspmmu_exp)
+		tc_exp = dspmmu_exp;
+	if (tc_exp > lcd_exp)
+		lcd_exp = tc_exp;
+	if (tc_exp > per_exp)
+		per_exp = tc_exp;
+
+	newval &= 0xf000;
+	newval |= per_exp << CKCTL_PERDIV_OFFSET;
+	newval |= lcd_exp << CKCTL_LCDDIV_OFFSET;
+	newval |= arm_exp << CKCTL_ARMDIV_OFFSET;
+	newval |= dsp_exp << CKCTL_DSPDIV_OFFSET;
+	newval |= tc_exp << CKCTL_TCDIV_OFFSET;
+	newval |= dspmmu_exp << CKCTL_DSPMMUDIV_OFFSET;
+
+	return newval;
+}
+
+static int calc_dsor_exp(struct clk *clk, unsigned long rate)
+{
+	/* Note: If target frequency is too low, this function will return 4,
+	 * which is invalid value. Caller must check for this value and act
+	 * accordingly.
+	 *
+	 * Note: This function does not check for following limitations set
+	 * by the hardware (all conditions must be true):
+	 * DSPMMU_CK == DSP_CK  or  DSPMMU_CK == DSP_CK/2
+	 * ARM_CK >= TC_CK
+	 * DSP_CK >= TC_CK
+	 * DSPMMU_CK >= TC_CK
+	 */
+	unsigned long realrate;
+	struct clk * parent;
+	unsigned  dsor_exp;
+
+	parent = clk->parent;
+	if (unlikely(parent == NULL))
+		return -EIO;
+
+	realrate = parent->rate;
+	for (dsor_exp=0; dsor_exp<4; dsor_exp++) {
+		if (realrate <= rate)
+			break;
+
+		realrate /= 2;
+	}
+
+	return dsor_exp;
+}
+
+unsigned long omap1_ckctl_recalc(struct clk *clk)
+{
+	/* Calculate divisor encoded as 2-bit exponent */
+	int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
+
+	return clk->parent->rate / dsor;
+}
+
+unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
+{
+	int dsor;
+
+	/* Calculate divisor encoded as 2-bit exponent
+	 *
+	 * The clock control bits are in DSP domain,
+	 * so api_ck is needed for access.
+	 * Note that DSP_CKCTL virt addr = phys addr, so
+	 * we must use __raw_readw() instead of omap_readw().
+	 */
+	omap1_clk_enable(api_ck_p);
+	dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
+	omap1_clk_disable(api_ck_p);
+
+	return clk->parent->rate / dsor;
+}
+
+/* MPU virtual clock functions */
+int omap1_select_table_rate(struct clk *clk, unsigned long rate)
+{
+	/* Find the highest supported frequency <= rate and switch to it */
+	struct mpu_rate * ptr;
+	unsigned long ref_rate;
+
+	ref_rate = ck_ref_p->rate;
+
+	for (ptr = omap1_rate_table; ptr->rate; ptr++) {
+		if (!(ptr->flags & cpu_mask))
+			continue;
+
+		if (ptr->xtal != ref_rate)
+			continue;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->rate <= rate)
+			break;
+	}
+
+	if (!ptr->rate)
+		return -EINVAL;
+
+	/*
+	 * In most cases we should not need to reprogram DPLL.
+	 * Reprogramming the DPLL is tricky, it must be done from SRAM.
+	 */
+	omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
+
+	/* XXX Do we need to recalculate the tree below DPLL1 at this point? */
+	ck_dpll1_p->rate = ptr->pll_rate;
+
+	return 0;
+}
+
+int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
+{
+	int dsor_exp;
+	u16 regval;
+
+	dsor_exp = calc_dsor_exp(clk, rate);
+	if (dsor_exp > 3)
+		dsor_exp = -EINVAL;
+	if (dsor_exp < 0)
+		return dsor_exp;
+
+	regval = __raw_readw(DSP_CKCTL);
+	regval &= ~(3 << clk->rate_offset);
+	regval |= dsor_exp << clk->rate_offset;
+	__raw_writew(regval, DSP_CKCTL);
+	clk->rate = clk->parent->rate / (1 << dsor_exp);
+
+	return 0;
+}
+
+long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+{
+	int dsor_exp = calc_dsor_exp(clk, rate);
+	if (dsor_exp < 0)
+		return dsor_exp;
+	if (dsor_exp > 3)
+		dsor_exp = 3;
+	return clk->parent->rate / (1 << dsor_exp);
+}
+
+int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+{
+	int dsor_exp;
+	u16 regval;
+
+	dsor_exp = calc_dsor_exp(clk, rate);
+	if (dsor_exp > 3)
+		dsor_exp = -EINVAL;
+	if (dsor_exp < 0)
+		return dsor_exp;
+
+	regval = omap_readw(ARM_CKCTL);
+	regval &= ~(3 << clk->rate_offset);
+	regval |= dsor_exp << clk->rate_offset;
+	regval = verify_ckctl_value(regval);
+	omap_writew(regval, ARM_CKCTL);
+	clk->rate = clk->parent->rate / (1 << dsor_exp);
+	return 0;
+}
+
+long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
+{
+	/* Find the highest supported frequency <= rate */
+	struct mpu_rate * ptr;
+	long highest_rate;
+	unsigned long ref_rate;
+
+	ref_rate = ck_ref_p->rate;
+
+	highest_rate = -EINVAL;
+
+	for (ptr = omap1_rate_table; ptr->rate; ptr++) {
+		if (!(ptr->flags & cpu_mask))
+			continue;
+
+		if (ptr->xtal != ref_rate)
+			continue;
+
+		highest_rate = ptr->rate;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->rate <= rate)
+			break;
+	}
+
+	return highest_rate;
+}
+
+static unsigned calc_ext_dsor(unsigned long rate)
+{
+	unsigned dsor;
+
+	/* MCLK and BCLK divisor selection is not linear:
+	 * freq = 96MHz / dsor
+	 *
+	 * RATIO_SEL range: dsor <-> RATIO_SEL
+	 * 0..6: (RATIO_SEL+2) <-> (dsor-2)
+	 * 6..48:  (8+(RATIO_SEL-6)*2) <-> ((dsor-8)/2+6)
+	 * Minimum dsor is 2 and maximum is 96. Odd divisors starting from 9
+	 * can not be used.
+	 */
+	for (dsor = 2; dsor < 96; ++dsor) {
+		if ((dsor & 1) && dsor > 8)
+			continue;
+		if (rate >= 96000000 / dsor)
+			break;
+	}
+	return dsor;
+}
+
+/* XXX Only needed on 1510 */
+int omap1_set_uart_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int val;
+
+	val = __raw_readl(clk->enable_reg);
+	if (rate == 12000000)
+		val &= ~(1 << clk->enable_bit);
+	else if (rate == 48000000)
+		val |= (1 << clk->enable_bit);
+	else
+		return -EINVAL;
+	__raw_writel(val, clk->enable_reg);
+	clk->rate = rate;
+
+	return 0;
+}
+
+/* External clock (MCLK & BCLK) functions */
+int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned dsor;
+	__u16 ratio_bits;
+
+	dsor = calc_ext_dsor(rate);
+	clk->rate = 96000000 / dsor;
+	if (dsor > 8)
+		ratio_bits = ((dsor - 8) / 2 + 6) << 2;
+	else
+		ratio_bits = (dsor - 2) << 2;
+
+	ratio_bits |= __raw_readw(clk->enable_reg) & ~0xfd;
+	__raw_writew(ratio_bits, clk->enable_reg);
+
+	return 0;
+}
+
+int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
+{
+	u32 l;
+	int div;
+	unsigned long p_rate;
+
+	p_rate = clk->parent->rate;
+	/* Round towards slower frequency */
+	div = (p_rate + rate - 1) / rate;
+	div--;
+	if (div < 0 || div > 7)
+		return -EINVAL;
+
+	l = omap_readl(MOD_CONF_CTRL_1);
+	l &= ~(7 << 17);
+	l |= div << 17;
+	omap_writel(l, MOD_CONF_CTRL_1);
+
+	clk->rate = p_rate / (div + 1);
+
+	return 0;
+}
+
+long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate)
+{
+	return 96000000 / calc_ext_dsor(rate);
+}
+
+void omap1_init_ext_clk(struct clk *clk)
+{
+	unsigned dsor;
+	__u16 ratio_bits;
+
+	/* Determine current rate and ensure clock is based on 96MHz APLL */
+	ratio_bits = __raw_readw(clk->enable_reg) & ~1;
+	__raw_writew(ratio_bits, clk->enable_reg);
+
+	ratio_bits = (ratio_bits & 0xfc) >> 2;
+	if (ratio_bits > 6)
+		dsor = (ratio_bits - 6) * 2 + 8;
+	else
+		dsor = ratio_bits + 2;
+
+	clk-> rate = 96000000 / dsor;
+}
+
+int omap1_clk_enable(struct clk *clk)
+{
+	int ret = 0;
+
+	if (clk->usecount++ == 0) {
+		if (clk->parent) {
+			ret = omap1_clk_enable(clk->parent);
+			if (ret)
+				goto err;
+
+			if (clk->flags & CLOCK_NO_IDLE_PARENT)
+				omap1_clk_deny_idle(clk->parent);
+		}
+
+		ret = clk->ops->enable(clk);
+		if (ret) {
+			if (clk->parent)
+				omap1_clk_disable(clk->parent);
+			goto err;
+		}
+	}
+	return ret;
+
+err:
+	clk->usecount--;
+	return ret;
+}
+
+void omap1_clk_disable(struct clk *clk)
+{
+	if (clk->usecount > 0 && !(--clk->usecount)) {
+		clk->ops->disable(clk);
+		if (likely(clk->parent)) {
+			omap1_clk_disable(clk->parent);
+			if (clk->flags & CLOCK_NO_IDLE_PARENT)
+				omap1_clk_allow_idle(clk->parent);
+		}
+	}
+}
+
+static int omap1_clk_enable_generic(struct clk *clk)
+{
+	__u16 regval16;
+	__u32 regval32;
+
+	if (unlikely(clk->enable_reg == NULL)) {
+		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+		       clk->name);
+		return -EINVAL;
+	}
+
+	if (clk->flags & ENABLE_REG_32BIT) {
+		regval32 = __raw_readl(clk->enable_reg);
+		regval32 |= (1 << clk->enable_bit);
+		__raw_writel(regval32, clk->enable_reg);
+	} else {
+		regval16 = __raw_readw(clk->enable_reg);
+		regval16 |= (1 << clk->enable_bit);
+		__raw_writew(regval16, clk->enable_reg);
+	}
+
+	return 0;
+}
+
+static void omap1_clk_disable_generic(struct clk *clk)
+{
+	__u16 regval16;
+	__u32 regval32;
+
+	if (clk->enable_reg == NULL)
+		return;
+
+	if (clk->flags & ENABLE_REG_32BIT) {
+		regval32 = __raw_readl(clk->enable_reg);
+		regval32 &= ~(1 << clk->enable_bit);
+		__raw_writel(regval32, clk->enable_reg);
+	} else {
+		regval16 = __raw_readw(clk->enable_reg);
+		regval16 &= ~(1 << clk->enable_bit);
+		__raw_writew(regval16, clk->enable_reg);
+	}
+}
+
+const struct clkops clkops_generic = {
+	.enable		= omap1_clk_enable_generic,
+	.disable	= omap1_clk_disable_generic,
+};
+
+static int omap1_clk_enable_dsp_domain(struct clk *clk)
+{
+	int retval;
+
+	retval = omap1_clk_enable(api_ck_p);
+	if (!retval) {
+		retval = omap1_clk_enable_generic(clk);
+		omap1_clk_disable(api_ck_p);
+	}
+
+	return retval;
+}
+
+static void omap1_clk_disable_dsp_domain(struct clk *clk)
+{
+	if (omap1_clk_enable(api_ck_p) == 0) {
+		omap1_clk_disable_generic(clk);
+		omap1_clk_disable(api_ck_p);
+	}
+}
+
+const struct clkops clkops_dspck = {
+	.enable		= omap1_clk_enable_dsp_domain,
+	.disable	= omap1_clk_disable_dsp_domain,
+};
+
+/* XXX SYSC register handling does not belong in the clock framework */
+static int omap1_clk_enable_uart_functional_16xx(struct clk *clk)
+{
+	int ret;
+	struct uart_clk *uclk;
+
+	ret = omap1_clk_enable_generic(clk);
+	if (ret == 0) {
+		/* Set smart idle acknowledgement mode */
+		uclk = (struct uart_clk *)clk;
+		omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8,
+			    uclk->sysc_addr);
+	}
+
+	return ret;
+}
+
+/* XXX SYSC register handling does not belong in the clock framework */
+static void omap1_clk_disable_uart_functional_16xx(struct clk *clk)
+{
+	struct uart_clk *uclk;
+
+	/* Set force idle acknowledgement mode */
+	uclk = (struct uart_clk *)clk;
+	omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr);
+
+	omap1_clk_disable_generic(clk);
+}
+
+/* XXX SYSC register handling does not belong in the clock framework */
+const struct clkops clkops_uart_16xx = {
+	.enable		= omap1_clk_enable_uart_functional_16xx,
+	.disable	= omap1_clk_disable_uart_functional_16xx,
+};
+
+long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (clk->round_rate != NULL)
+		return clk->round_rate(clk, rate);
+
+	return clk->rate;
+}
+
+int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int  ret = -EINVAL;
+
+	if (clk->set_rate)
+		ret = clk->set_rate(clk, rate);
+	return ret;
+}
+
+/*
+ * Omap1 clock reset and init functions
+ */
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+
+void omap1_clk_disable_unused(struct clk *clk)
+{
+	__u32 regval32;
+
+	/* Clocks in the DSP domain need api_ck. Just assume bootloader
+	 * has not enabled any DSP clocks */
+	if (clk->enable_reg == DSP_IDLECT2) {
+		pr_info("Skipping reset check for DSP domain clock \"%s\"\n",
+			clk->name);
+		return;
+	}
+
+	/* Is the clock already disabled? */
+	if (clk->flags & ENABLE_REG_32BIT)
+		regval32 = __raw_readl(clk->enable_reg);
+	else
+		regval32 = __raw_readw(clk->enable_reg);
+
+	if ((regval32 & (1 << clk->enable_bit)) == 0)
+		return;
+
+	printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
+	clk->ops->disable(clk);
+	printk(" done\n");
+}
+
+#endif
+
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+	int ret;
+
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = omap1_clk_enable(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (clk == NULL || IS_ERR(clk))
+		return;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (clk->usecount == 0) {
+		pr_err("Trying disable clock %s with 0 usecount\n",
+		       clk->name);
+		WARN_ON(1);
+		goto out;
+	}
+
+	omap1_clk_disable(clk);
+
+out:
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	unsigned long flags;
+	unsigned long ret;
+
+	if (clk == NULL || IS_ERR(clk))
+		return 0;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = clk->rate;
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/*
+ * Optional clock functions defined in include/linux/clk.h
+ */
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	long ret;
+
+	if (clk == NULL || IS_ERR(clk))
+		return 0;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = omap1_clk_round_rate(clk, rate);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	if (clk == NULL || IS_ERR(clk))
+		return ret;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	ret = omap1_clk_set_rate(clk, rate);
+	if (ret == 0)
+		propagate_rate(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	WARN_ONCE(1, "clk_set_parent() not implemented for OMAP1\n");
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+/*
+ * OMAP specific clock functions shared between omap1 and omap2
+ */
+
+int __initdata mpurate;
+
+/*
+ * By default we use the rate set by the bootloader.
+ * You can override this with mpurate= cmdline option.
+ */
+static int __init omap_clk_setup(char *str)
+{
+	get_option(&str, &mpurate);
+
+	if (!mpurate)
+		return 1;
+
+	if (mpurate < 1000)
+		mpurate *= 1000000;
+
+	return 1;
+}
+__setup("mpurate=", omap_clk_setup);
+
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
+{
+	return clk->parent->rate;
+}
+
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+unsigned long omap_fixed_divisor_recalc(struct clk *clk)
+{
+	WARN_ON(!clk->fixed_div);
+
+	return clk->parent->rate / clk->fixed_div;
+}
+
+void clk_reparent(struct clk *child, struct clk *parent)
+{
+	list_del_init(&child->sibling);
+	if (parent)
+		list_add(&child->sibling, &parent->children);
+	child->parent = parent;
+
+	/* now do the debugfs renaming to reattach the child
+	   to the proper parent */
+}
+
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &tclk->children, sibling) {
+		if (clkp->recalc)
+			clkp->rate = clkp->recalc(clkp);
+		propagate_rate(clkp);
+	}
+}
+
+static LIST_HEAD(root_clks);
+
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &root_clks, sibling) {
+		if (clkp->recalc)
+			clkp->rate = clkp->recalc(clkp);
+		propagate_rate(clkp);
+	}
+}
+
+/**
+ * clk_preinit - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run.  No return value.
+ */
+void clk_preinit(struct clk *clk)
+{
+	INIT_LIST_HEAD(&clk->children);
+}
+
+int clk_register(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	/*
+	 * trap out already registered clocks
+	 */
+	if (clk->node.next || clk->node.prev)
+		return 0;
+
+	mutex_lock(&clocks_mutex);
+	if (clk->parent)
+		list_add(&clk->sibling, &clk->parent->children);
+	else
+		list_add(&clk->sibling, &root_clks);
+
+	list_add(&clk->node, &clocks);
+	if (clk->init)
+		clk->init(clk);
+	mutex_unlock(&clocks_mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return;
+
+	mutex_lock(&clocks_mutex);
+	list_del(&clk->sibling);
+	list_del(&clk->node);
+	mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+void clk_enable_init_clocks(void)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &clocks, node)
+		if (clkp->flags & ENABLE_ON_INIT)
+			clk_enable(clkp);
+}
+
+/**
+ * omap_clk_get_by_name - locate OMAP struct clk by its name
+ * @name: name of the struct clk to locate
+ *
+ * Locate an OMAP struct clk by its name.  Assumes that struct clk
+ * names are unique.  Returns NULL if not found or a pointer to the
+ * struct clk if found.
+ */
+struct clk *omap_clk_get_by_name(const char *name)
+{
+	struct clk *c;
+	struct clk *ret = NULL;
+
+	mutex_lock(&clocks_mutex);
+
+	list_for_each_entry(c, &clocks, node) {
+		if (!strcmp(c->name, name)) {
+			ret = c;
+			break;
+		}
+	}
+
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+
+int omap_clk_enable_autoidle_all(void)
+{
+	struct clk *c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+
+	list_for_each_entry(c, &clocks, node)
+		if (c->ops->allow_idle)
+			c->ops->allow_idle(c);
+
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return 0;
+}
+
+int omap_clk_disable_autoidle_all(void)
+{
+	struct clk *c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+
+	list_for_each_entry(c, &clocks, node)
+		if (c->ops->deny_idle)
+			c->ops->deny_idle(c);
+
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return 0;
+}
+
+/*
+ * Low level helpers
+ */
+static int clkll_enable_null(struct clk *clk)
+{
+	return 0;
+}
+
+static void clkll_disable_null(struct clk *clk)
+{
+}
+
+const struct clkops clkops_null = {
+	.enable		= clkll_enable_null,
+	.disable	= clkll_disable_null,
+};
+
+/*
+ * Dummy clock
+ *
+ * Used for clock aliases that are needed on some OMAPs, but not others
+ */
+struct clk dummy_ck = {
+	.name	= "dummy",
+	.ops	= &clkops_null,
+};
+
+/*
+ *
+ */
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+	struct clk *ck;
+	unsigned long flags;
+
+	pr_info("clock: disabling unused clocks to save power\n");
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	list_for_each_entry(ck, &clocks, node) {
+		if (ck->ops == &clkops_null)
+			continue;
+
+		if (ck->usecount > 0 || !ck->enable_reg)
+			continue;
+
+		omap1_clk_disable_unused(ck);
+	}
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return 0;
+}
+late_initcall(clk_disable_unused);
+late_initcall(omap_clk_enable_autoidle_all);
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+/*
+ *	debugfs support to trace clock tree hierarchy and attributes
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static struct dentry *clk_debugfs_root;
+
+static int clk_dbg_show_summary(struct seq_file *s, void *unused)
+{
+	struct clk *c;
+	struct clk *pa;
+
+	mutex_lock(&clocks_mutex);
+	seq_printf(s, "%-30s %-30s %-10s %s\n",
+		   "clock-name", "parent-name", "rate", "use-count");
+
+	list_for_each_entry(c, &clocks, node) {
+		pa = c->parent;
+		seq_printf(s, "%-30s %-30s %-10lu %d\n",
+			   c->name, pa ? pa->name : "none", c->rate,
+			   c->usecount);
+	}
+	mutex_unlock(&clocks_mutex);
+
+	return 0;
+}
+
+static int clk_dbg_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, clk_dbg_show_summary, inode->i_private);
+}
+
+static const struct file_operations debug_clock_fops = {
+	.open           = clk_dbg_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+	int err;
+	struct dentry *d;
+	struct clk *pa = c->parent;
+
+	d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root);
+	if (!d)
+		return -ENOMEM;
+	c->dent = d;
+
+	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+	if (!d) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+	return 0;
+
+err_out:
+	debugfs_remove_recursive(c->dent);
+	return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+	int err;
+	struct clk *pa = c->parent;
+
+	if (pa && !pa->dent) {
+		err = clk_debugfs_register(pa);
+		if (err)
+			return err;
+	}
+
+	if (!c->dent) {
+		err = clk_debugfs_register_one(c);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+	struct clk *c;
+	struct dentry *d;
+	int err;
+
+	d = debugfs_create_dir("clock", NULL);
+	if (!d)
+		return -ENOMEM;
+	clk_debugfs_root = d;
+
+	list_for_each_entry(c, &clocks, node) {
+		err = clk_debugfs_register(c);
+		if (err)
+			goto err_out;
+	}
+
+	d = debugfs_create_file("summary", S_IRUGO,
+		d, NULL, &debug_clock_fops);
+	if (!d)
+		return -ENOMEM;
+
+	return 0;
+err_out:
+	debugfs_remove_recursive(clk_debugfs_root);
+	return err;
+}
+late_initcall(clk_debugfs_init);
+
+#endif /* defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) */
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
new file mode 100644
index 000000000..1e4918a3a
--- /dev/null
+++ b/arch/arm/mach-omap1/clock.h
@@ -0,0 +1,293 @@
+/*
+ *  linux/arch/arm/mach-omap1/clock.h
+ *
+ *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
+#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
+
+#include <linux/clk.h>
+#include <linux/list.h>
+
+#include <linux/clkdev.h>
+
+struct module;
+struct clk;
+
+struct omap_clk {
+	u16				cpu;
+	struct clk_lookup		lk;
+};
+
+#define CLK(dev, con, ck, cp)		\
+	{				\
+		 .cpu = cp,		\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
+
+/* Platform flags for the clkdev-OMAP integration code */
+#define CK_310		(1 << 0)
+#define CK_7XX		(1 << 1)	/* 7xx, 850 */
+#define CK_1510		(1 << 2)
+#define CK_16XX		(1 << 3)	/* 16xx, 17xx, 5912 */
+#define CK_1710		(1 << 4)	/* 1710 extra for rate selection */
+
+
+/* Temporary, needed during the common clock framework conversion */
+#define __clk_get_name(clk)	(clk->name)
+#define __clk_get_parent(clk)	(clk->parent)
+#define __clk_get_rate(clk)	(clk->rate)
+
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware.  Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+	int			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+	void			(*find_idlest)(struct clk *, void __iomem **,
+					       u8 *, u8 *);
+	void			(*find_companion)(struct clk *, void __iomem **,
+						  u8 *);
+	void			(*allow_idle)(struct clk *);
+	void			(*deny_idle)(struct clk *);
+};
+
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ *     bits share the same register.  This flag allows the
+ *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ *     should be used.  This is a temporary solution - a better approach
+ *     would be to associate clock type-specific data with the clock,
+ *     similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL	(1 << 1)
+#define CLOCK_NO_IDLE_PARENT	(1 << 2)
+#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */
+#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2		(1 << 5)
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named.  It should be "enable_count" or
+ * something similar.  "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals.  (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+	struct list_head	node;
+	const struct clkops	*ops;
+	const char		*name;
+	struct clk		*parent;
+	struct list_head	children;
+	struct list_head	sibling;	/* node for children */
+	unsigned long		rate;
+	void __iomem		*enable_reg;
+	unsigned long		(*recalc)(struct clk *);
+	int			(*set_rate)(struct clk *, unsigned long);
+	long			(*round_rate)(struct clk *, unsigned long);
+	void			(*init)(struct clk *);
+	u8			enable_bit;
+	s8			usecount;
+	u8			fixed_div;
+	u8			flags;
+	u8			rate_offset;
+	u8			src_offset;
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+	struct dentry		*dent;	/* For visible tree hierarchy */
+#endif
+};
+
+struct clk_functions {
+	int		(*clk_enable)(struct clk *clk);
+	void		(*clk_disable)(struct clk *clk);
+	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
+	void		(*clk_allow_idle)(struct clk *clk);
+	void		(*clk_deny_idle)(struct clk *clk);
+	void		(*clk_disable_unused)(struct clk *clk);
+};
+
+extern int mpurate;
+
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+
+extern const struct clkops clkops_null;
+
+extern struct clk dummy_ck;
+
+int omap1_clk_init(void);
+void omap1_clk_late_init(void);
+extern int omap1_clk_enable(struct clk *clk);
+extern void omap1_clk_disable(struct clk *clk);
+extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
+extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_ckctl_recalc(struct clk *clk);
+extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_sossi_recalc(struct clk *clk);
+extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
+extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate);
+extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_uart_recalc(struct clk *clk);
+extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate);
+extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate);
+extern void omap1_init_ext_clk(struct clk *clk);
+extern int omap1_select_table_rate(struct clk *clk, unsigned long rate);
+extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate);
+extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
+extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_watchdog_recalc(struct clk *clk);
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+extern void omap1_clk_disable_unused(struct clk *clk);
+#else
+#define omap1_clk_disable_unused	NULL
+#endif
+
+struct uart_clk {
+	struct clk	clk;
+	unsigned long	sysc_addr;
+};
+
+/* Provide a method for preventing idling some ARM IDLECT clocks */
+struct arm_idlect1_clk {
+	struct clk	clk;
+	unsigned long	no_idle_count;
+	__u8		idlect_shift;
+};
+
+/* ARM_CKCTL bit shifts */
+#define CKCTL_PERDIV_OFFSET	0
+#define CKCTL_LCDDIV_OFFSET	2
+#define CKCTL_ARMDIV_OFFSET	4
+#define CKCTL_DSPDIV_OFFSET	6
+#define CKCTL_TCDIV_OFFSET	8
+#define CKCTL_DSPMMUDIV_OFFSET	10
+/*#define ARM_TIMXO		12*/
+#define EN_DSPCK		13
+/*#define ARM_INTHCK_SEL	14*/ /* Divide-by-2 for mpu inth_ck */
+/* DSP_CKCTL bit shifts */
+#define CKCTL_DSPPERDIV_OFFSET	0
+
+/* ARM_IDLECT2 bit shifts */
+#define EN_WDTCK	0
+#define EN_XORPCK	1
+#define EN_PERCK	2
+#define EN_LCDCK	3
+#define EN_LBCK		4 /* Not on 1610/1710 */
+/*#define EN_HSABCK	5*/
+#define EN_APICK	6
+#define EN_TIMCK	7
+#define DMACK_REQ	8
+#define EN_GPIOCK	9 /* Not on 1610/1710 */
+/*#define EN_LBFREECK	10*/
+#define EN_CKOUT_ARM	11
+
+/* ARM_IDLECT3 bit shifts */
+#define EN_OCPI_CK	0
+#define EN_TC1_CK	2
+#define EN_TC2_CK	4
+
+/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */
+#define EN_DSPTIMCK	5
+
+/* Various register defines for clock controls scattered around OMAP chip */
+#define SDW_MCLK_INV_BIT	2	/* In ULPD_CLKC_CTRL */
+#define USB_MCLK_EN_BIT		4	/* In ULPD_CLKC_CTRL */
+#define USB_HOST_HHC_UHOST_EN	9	/* In MOD_CONF_CTRL_0 */
+#define SWD_ULPD_PLL_CLK_REQ	1	/* In SWD_CLK_DIV_CTRL_SEL */
+#define COM_ULPD_PLL_CLK_REQ	1	/* In COM_CLK_DIV_CTRL_SEL */
+#define SWD_CLK_DIV_CTRL_SEL	0xfffe0874
+#define COM_CLK_DIV_CTRL_SEL	0xfffe0878
+#define SOFT_REQ_REG		0xfffe0834
+#define SOFT_REQ_REG2		0xfffe0880
+
+extern __u32 arm_idlect1_mask;
+extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
+
+extern const struct clkops clkops_dspck;
+extern const struct clkops clkops_dummy;
+extern const struct clkops clkops_uart_16xx;
+extern const struct clkops clkops_generic;
+
+/* used for passing SoC type to omap1_{select,round_to}_table_rate() */
+extern u32 cpu_mask;
+
+#endif
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
new file mode 100644
index 000000000..6c4f76636
--- /dev/null
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -0,0 +1,924 @@
+/*
+ *  linux/arch/arm/mach-omap1/clock_data.c
+ *
+ *  Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * To do:
+ * - Clocks that are only available on some chips should be marked with the
+ *   chips that they are present on.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>  /* for machine_is_* */
+
+#include "soc.h"
+
+#include <mach/hardware.h>
+#include <mach/usb.h>   /* for OTG_BASE */
+
+#include "iomap.h"
+#include "clock.h"
+#include "sram.h"
+
+/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
+#define IDL_CLKOUT_ARM_SHIFT			12
+#define IDLTIM_ARM_SHIFT			9
+#define IDLAPI_ARM_SHIFT			8
+#define IDLIF_ARM_SHIFT				6
+#define IDLLB_ARM_SHIFT				4	/* undocumented? */
+#define OMAP1510_IDLLCD_ARM_SHIFT		3	/* undocumented? */
+#define IDLPER_ARM_SHIFT			2
+#define IDLXORP_ARM_SHIFT			1
+#define IDLWDT_ARM_SHIFT			0
+
+/* Some MOD_CONF_CTRL_0 bit shifts - used in struct clk.enable_bit */
+#define CONF_MOD_UART3_CLK_MODE_R		31
+#define CONF_MOD_UART2_CLK_MODE_R		30
+#define CONF_MOD_UART1_CLK_MODE_R		29
+#define CONF_MOD_MMC_SD_CLK_REQ_R		23
+#define CONF_MOD_MCBSP3_AUXON			20
+
+/* Some MOD_CONF_CTRL_1 bit shifts - used in struct clk.enable_bit */
+#define CONF_MOD_SOSSI_CLK_EN_R			16
+
+/* Some OTG_SYSCON_2-specific bit fields */
+#define OTG_SYSCON_2_UHOST_EN_SHIFT		8
+
+/* Some SOFT_REQ_REG bit fields - used in struct clk.enable_bit */
+#define SOFT_MMC2_DPLL_REQ_SHIFT	13
+#define SOFT_MMC_DPLL_REQ_SHIFT		12
+#define SOFT_UART3_DPLL_REQ_SHIFT	11
+#define SOFT_UART2_DPLL_REQ_SHIFT	10
+#define SOFT_UART1_DPLL_REQ_SHIFT	9
+#define SOFT_USB_OTG_DPLL_REQ_SHIFT	8
+#define SOFT_CAM_DPLL_REQ_SHIFT		7
+#define SOFT_COM_MCKO_REQ_SHIFT		6
+#define SOFT_PERIPH_REQ_SHIFT		5	/* sys_ck gate for UART2 ? */
+#define USB_REQ_EN_SHIFT		4
+#define SOFT_USB_REQ_SHIFT		3	/* sys_ck gate for USB host? */
+#define SOFT_SDW_REQ_SHIFT		2	/* sys_ck gate for Bluetooth? */
+#define SOFT_COM_REQ_SHIFT		1	/* sys_ck gate for com proc? */
+#define SOFT_DPLL_REQ_SHIFT		0
+
+/*
+ * Omap1 clocks
+ */
+
+static struct clk ck_ref = {
+	.name		= "ck_ref",
+	.ops		= &clkops_null,
+	.rate		= 12000000,
+};
+
+static struct clk ck_dpll1 = {
+	.name		= "ck_dpll1",
+	.ops		= &clkops_null,
+	.parent		= &ck_ref,
+};
+
+/*
+ * FIXME: This clock seems to be necessary but no-one has asked for its
+ * activation.  [ FIX: SoSSI, SSR ]
+ */
+static struct arm_idlect1_clk ck_dpll1out = {
+	.clk = {
+		.name		= "ck_dpll1out",
+		.ops		= &clkops_generic,
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT |
+				  ENABLE_ON_INIT,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_CKOUT_ARM,
+		.recalc		= &followparent_recalc,
+	},
+	.idlect_shift	= IDL_CLKOUT_ARM_SHIFT,
+};
+
+static struct clk sossi_ck = {
+	.name		= "ck_sossi",
+	.ops		= &clkops_generic,
+	.parent		= &ck_dpll1out.clk,
+	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
+	.enable_bit	= CONF_MOD_SOSSI_CLK_EN_R,
+	.recalc		= &omap1_sossi_recalc,
+	.set_rate	= &omap1_set_sossi_rate,
+};
+
+static struct clk arm_ck = {
+	.name		= "arm_ck",
+	.ops		= &clkops_null,
+	.parent		= &ck_dpll1,
+	.rate_offset	= CKCTL_ARMDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
+};
+
+static struct arm_idlect1_clk armper_ck = {
+	.clk = {
+		.name		= "armper_ck",
+		.ops		= &clkops_generic,
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_PERCK,
+		.rate_offset	= CKCTL_PERDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.round_rate	= omap1_clk_round_rate_ckctl_arm,
+		.set_rate	= omap1_clk_set_rate_ckctl_arm,
+	},
+	.idlect_shift	= IDLPER_ARM_SHIFT,
+};
+
+/*
+ * FIXME: This clock seems to be necessary but no-one has asked for its
+ * activation.  [ GPIO code for 1510 ]
+ */
+static struct clk arm_gpio_ck = {
+	.name		= "ick",
+	.ops		= &clkops_generic,
+	.parent		= &ck_dpll1,
+	.flags		= ENABLE_ON_INIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+	.enable_bit	= EN_GPIOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct arm_idlect1_clk armxor_ck = {
+	.clk = {
+		.name		= "armxor_ck",
+		.ops		= &clkops_generic,
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_XORPCK,
+		.recalc		= &followparent_recalc,
+	},
+	.idlect_shift	= IDLXORP_ARM_SHIFT,
+};
+
+static struct arm_idlect1_clk armtim_ck = {
+	.clk = {
+		.name		= "armtim_ck",
+		.ops		= &clkops_generic,
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_TIMCK,
+		.recalc		= &followparent_recalc,
+	},
+	.idlect_shift	= IDLTIM_ARM_SHIFT,
+};
+
+static struct arm_idlect1_clk armwdt_ck = {
+	.clk = {
+		.name		= "armwdt_ck",
+		.ops		= &clkops_generic,
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_WDTCK,
+		.fixed_div	= 14,
+		.recalc		= &omap_fixed_divisor_recalc,
+	},
+	.idlect_shift	= IDLWDT_ARM_SHIFT,
+};
+
+static struct clk arminth_ck16xx = {
+	.name		= "arminth_ck",
+	.ops		= &clkops_null,
+	.parent		= &arm_ck,
+	.recalc		= &followparent_recalc,
+	/* Note: On 16xx the frequency can be divided by 2 by programming
+	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
+	 *
+	 * 1510 version is in TC clocks.
+	 */
+};
+
+static struct clk dsp_ck = {
+	.name		= "dsp_ck",
+	.ops		= &clkops_generic,
+	.parent		= &ck_dpll1,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_CKCTL),
+	.enable_bit	= EN_DSPCK,
+	.rate_offset	= CKCTL_DSPDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
+};
+
+static struct clk dspmmu_ck = {
+	.name		= "dspmmu_ck",
+	.ops		= &clkops_null,
+	.parent		= &ck_dpll1,
+	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
+};
+
+static struct clk dspper_ck = {
+	.name		= "dspper_ck",
+	.ops		= &clkops_dspck,
+	.parent		= &ck_dpll1,
+	.enable_reg	= DSP_IDLECT2,
+	.enable_bit	= EN_PERCK,
+	.rate_offset	= CKCTL_PERDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc_dsp_domain,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= &omap1_clk_set_rate_dsp_domain,
+};
+
+static struct clk dspxor_ck = {
+	.name		= "dspxor_ck",
+	.ops		= &clkops_dspck,
+	.parent		= &ck_ref,
+	.enable_reg	= DSP_IDLECT2,
+	.enable_bit	= EN_XORPCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dsptim_ck = {
+	.name		= "dsptim_ck",
+	.ops		= &clkops_dspck,
+	.parent		= &ck_ref,
+	.enable_reg	= DSP_IDLECT2,
+	.enable_bit	= EN_DSPTIMCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct arm_idlect1_clk tc_ck = {
+	.clk = {
+		.name		= "tc_ck",
+		.ops		= &clkops_null,
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.rate_offset	= CKCTL_TCDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.round_rate	= omap1_clk_round_rate_ckctl_arm,
+		.set_rate	= omap1_clk_set_rate_ckctl_arm,
+	},
+	.idlect_shift	= IDLIF_ARM_SHIFT,
+};
+
+static struct clk arminth_ck1510 = {
+	.name		= "arminth_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+	/* Note: On 1510 the frequency follows TC_CK
+	 *
+	 * 16xx version is in MPU clocks.
+	 */
+};
+
+static struct clk tipb_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "tipb_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk l3_ocpi_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "l3_ocpi_ck",
+	.ops		= &clkops_generic,
+	.parent		= &tc_ck.clk,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
+	.enable_bit	= EN_OCPI_CK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk tc1_ck = {
+	.name		= "tc1_ck",
+	.ops		= &clkops_generic,
+	.parent		= &tc_ck.clk,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
+	.enable_bit	= EN_TC1_CK,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * FIXME: This clock seems to be necessary but no-one has asked for its
+ * activation.  [ pm.c (SRAM), CCP, Camera ]
+ */
+static struct clk tc2_ck = {
+	.name		= "tc2_ck",
+	.ops		= &clkops_generic,
+	.parent		= &tc_ck.clk,
+	.flags		= ENABLE_ON_INIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
+	.enable_bit	= EN_TC2_CK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dma_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "dma_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dma_lcdfree_ck = {
+	.name		= "dma_lcdfree_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct arm_idlect1_clk api_ck = {
+	.clk = {
+		.name		= "api_ck",
+		.ops		= &clkops_generic,
+		.parent		= &tc_ck.clk,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_APICK,
+		.recalc		= &followparent_recalc,
+	},
+	.idlect_shift	= IDLAPI_ARM_SHIFT,
+};
+
+static struct arm_idlect1_clk lb_ck = {
+	.clk = {
+		.name		= "lb_ck",
+		.ops		= &clkops_generic,
+		.parent		= &tc_ck.clk,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_LBCK,
+		.recalc		= &followparent_recalc,
+	},
+	.idlect_shift	= IDLLB_ARM_SHIFT,
+};
+
+static struct clk rhea1_ck = {
+	.name		= "rhea1_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rhea2_ck = {
+	.name		= "rhea2_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk lcd_ck_16xx = {
+	.name		= "lcd_ck",
+	.ops		= &clkops_generic,
+	.parent		= &ck_dpll1,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+	.enable_bit	= EN_LCDCK,
+	.rate_offset	= CKCTL_LCDDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
+};
+
+static struct arm_idlect1_clk lcd_ck_1510 = {
+	.clk = {
+		.name		= "lcd_ck",
+		.ops		= &clkops_generic,
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_LCDCK,
+		.rate_offset	= CKCTL_LCDDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.round_rate	= omap1_clk_round_rate_ckctl_arm,
+		.set_rate	= omap1_clk_set_rate_ckctl_arm,
+	},
+	.idlect_shift	= OMAP1510_IDLLCD_ARM_SHIFT,
+};
+
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX does this need SYSC register handling?
+ */
+static struct clk uart1_1510 = {
+	.name		= "uart1_ck",
+	.ops		= &clkops_null,
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= CONF_MOD_UART1_CLK_MODE_R,
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+};
+
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX SYSC register handling does not belong in the clock framework
+ */
+static struct uart_clk uart1_16xx = {
+	.clk	= {
+		.name		= "uart1_ck",
+		.ops		= &clkops_uart_16xx,
+		/* Direct from ULPD, no real parent */
+		.parent		= &armper_ck.clk,
+		.rate		= 48000000,
+		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+		.enable_bit	= CONF_MOD_UART1_CLK_MODE_R,
+	},
+	.sysc_addr	= 0xfffb0054,
+};
+
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX does this need SYSC register handling?
+ */
+static struct clk uart2_ck = {
+	.name		= "uart2_ck",
+	.ops		= &clkops_null,
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= CONF_MOD_UART2_CLK_MODE_R,
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+};
+
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX does this need SYSC register handling?
+ */
+static struct clk uart3_1510 = {
+	.name		= "uart3_ck",
+	.ops		= &clkops_null,
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= CONF_MOD_UART3_CLK_MODE_R,
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+};
+
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz.  Reimplement with clksel.
+ *
+ * XXX SYSC register handling does not belong in the clock framework
+ */
+static struct uart_clk uart3_16xx = {
+	.clk	= {
+		.name		= "uart3_ck",
+		.ops		= &clkops_uart_16xx,
+		/* Direct from ULPD, no real parent */
+		.parent		= &armper_ck.clk,
+		.rate		= 48000000,
+		.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+		.enable_bit	= CONF_MOD_UART3_CLK_MODE_R,
+	},
+	.sysc_addr	= 0xfffb9854,
+};
+
+static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
+	.name		= "usb_clko",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 6000000,
+	.flags		= ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
+	.enable_bit	= USB_MCLK_EN_BIT,
+};
+
+static struct clk usb_hhc_ck1510 = {
+	.name		= "usb_hhc_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
+	.flags		= ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= USB_HOST_HHC_UHOST_EN,
+};
+
+static struct clk usb_hhc_ck16xx = {
+	.name		= "usb_hhc_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
+	.flags		= ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
+	.enable_bit	= OTG_SYSCON_2_UHOST_EN_SHIFT
+};
+
+static struct clk usb_dc_ck = {
+	.name		= "usb_dc_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= SOFT_USB_OTG_DPLL_REQ_SHIFT,
+};
+
+static struct clk uart1_7xx = {
+	.name		= "uart1_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 12000000,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 9,
+};
+
+static struct clk uart2_7xx = {
+	.name		= "uart2_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 12000000,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 11,
+};
+
+static struct clk mclk_1510 = {
+	.name		= "mclk",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.rate		= 12000000,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= SOFT_COM_MCKO_REQ_SHIFT,
+};
+
+static struct clk mclk_16xx = {
+	.name		= "mclk",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.enable_reg	= OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
+	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
+	.set_rate	= &omap1_set_ext_clk_rate,
+	.round_rate	= &omap1_round_ext_clk_rate,
+	.init		= &omap1_init_ext_clk,
+};
+
+static struct clk bclk_1510 = {
+	.name		= "bclk",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.rate		= 12000000,
+};
+
+static struct clk bclk_16xx = {
+	.name		= "bclk",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.enable_reg	= OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
+	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
+	.set_rate	= &omap1_set_ext_clk_rate,
+	.round_rate	= &omap1_round_ext_clk_rate,
+	.init		= &omap1_init_ext_clk,
+};
+
+static struct clk mmc1_ck = {
+	.name		= "mmc1_ck",
+	.ops		= &clkops_generic,
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= CONF_MOD_MMC_SD_CLK_REQ_R,
+};
+
+/*
+ * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as
+ * CONF_MOD_MCBSP3_AUXON ??
+ */
+static struct clk mmc2_ck = {
+	.name		= "mmc2_ck",
+	.ops		= &clkops_generic,
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= 20,
+};
+
+static struct clk mmc3_ck = {
+	.name		= "mmc3_ck",
+	.ops		= &clkops_generic,
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= SOFT_MMC_DPLL_REQ_SHIFT,
+};
+
+static struct clk virtual_ck_mpu = {
+	.name		= "mpu",
+	.ops		= &clkops_null,
+	.parent		= &arm_ck, /* Is smarter alias for */
+	.recalc		= &followparent_recalc,
+	.set_rate	= &omap1_select_table_rate,
+	.round_rate	= &omap1_round_to_table_rate,
+};
+
+/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
+remains active during MPU idle whenever this is enabled */
+static struct clk i2c_fck = {
+	.name		= "i2c_fck",
+	.ops		= &clkops_null,
+	.flags		= CLOCK_NO_IDLE_PARENT,
+	.parent		= &armxor_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c_ick = {
+	.name		= "i2c_ick",
+	.ops		= &clkops_null,
+	.flags		= CLOCK_NO_IDLE_PARENT,
+	.parent		= &armper_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * clkdev integration
+ */
+
+static struct omap_clk omap_clks[] = {
+	/* non-ULPD clocks */
+	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	/* CK_GEN1 clocks */
+	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk, CK_16XX),
+	CLK(NULL,	"ck_sossi",	&sossi_ck,	CK_16XX),
+	CLK(NULL,	"arm_ck",	&arm_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"armper_ck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap_gpio.0", "ick",	&arm_gpio_ck,	CK_1510 | CK_310),
+	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap_wdt",	"fck",		&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap_wdt",	"ick",		&armper_ck.clk,	CK_16XX),
+	CLK("omap_wdt", "ick",		&dummy_ck,	CK_1510 | CK_310),
+	CLK(NULL,	"arminth_ck",	&arminth_ck1510, CK_1510 | CK_310),
+	CLK(NULL,	"arminth_ck",	&arminth_ck16xx, CK_16XX),
+	/* CK_GEN2 clocks */
+	CLK(NULL,	"dsp_ck",	&dsp_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspmmu_ck",	&dspmmu_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspper_ck",	&dspper_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspxor_ck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dsptim_ck",	&dsptim_ck,	CK_16XX | CK_1510 | CK_310),
+	/* CK_GEN3 clocks */
+	CLK(NULL,	"tc_ck",	&tc_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"tipb_ck",	&tipb_ck,	CK_1510 | CK_310),
+	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck,	CK_16XX | CK_7XX),
+	CLK(NULL,	"tc1_ck",	&tc1_ck,	CK_16XX),
+	CLK(NULL,	"tc2_ck",	&tc2_ck,	CK_16XX),
+	CLK(NULL,	"dma_ck",	&dma_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
+	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"lb_ck",	&lb_ck.clk,	CK_1510 | CK_310),
+	CLK(NULL,	"rhea1_ck",	&rhea1_ck,	CK_16XX),
+	CLK(NULL,	"rhea2_ck",	&rhea2_ck,	CK_16XX),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx,	CK_16XX | CK_7XX),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_1510.clk, CK_1510 | CK_310),
+	/* ULPD clocks */
+	CLK(NULL,	"uart1_ck",	&uart1_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk, CK_16XX),
+	CLK(NULL,	"uart1_ck",	&uart1_7xx,	CK_7XX),
+	CLK(NULL,	"uart2_ck",	&uart2_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"uart2_ck",	&uart2_7xx,	CK_7XX),
+	CLK(NULL,	"uart3_ck",	&uart3_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk, CK_16XX),
+	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
+	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
+	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX | CK_7XX),
+	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
+	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"bclk",		&bclk_16xx,	CK_16XX),
+	CLK("mmci-omap.0", "fck",	&mmc1_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK("mmci-omap.0", "fck",	&mmc3_ck,	CK_7XX),
+	CLK("mmci-omap.0", "ick",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK("mmci-omap.1", "fck",	&mmc2_ck,	CK_16XX),
+	CLK("mmci-omap.1", "ick",	&armper_ck.clk,	CK_16XX),
+	/* Virtual clocks */
+	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
+	CLK("omap_i2c.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK("omap_i2c.1", "ick",	&i2c_ick,	CK_16XX),
+	CLK("omap_i2c.1", "ick",	&dummy_ck,	CK_1510 | CK_310 | CK_7XX),
+	CLK("omap1_spi100k.1", "fck",	&dummy_ck,	CK_7XX),
+	CLK("omap1_spi100k.1", "ick",	&dummy_ck,	CK_7XX),
+	CLK("omap1_spi100k.2", "fck",	&dummy_ck,	CK_7XX),
+	CLK("omap1_spi100k.2", "ick",	&dummy_ck,	CK_7XX),
+	CLK("omap_uwire", "fck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.1", "ick",	&dspper_ck,	CK_16XX),
+	CLK("omap-mcbsp.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk,	CK_16XX),
+	CLK("omap-mcbsp.2", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.3", "ick",	&dspper_ck,	CK_16XX),
+	CLK("omap-mcbsp.3", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.1", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.2", "fck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.3", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+};
+
+/*
+ * init
+ */
+
+static void __init omap1_show_rates(void)
+{
+	pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+		  ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+		  ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+		  arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+}
+
+u32 cpu_mask;
+
+int __init omap1_clk_init(void)
+{
+	struct omap_clk *c;
+	int crystal_type = 0; /* Default 12 MHz */
+	u32 reg;
+
+#ifdef CONFIG_DEBUG_LL
+	/*
+	 * Resets some clocks that may be left on from bootloader,
+	 * but leaves serial clocks on.
+	 */
+	omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+#endif
+
+	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
+	reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
+	omap_writew(reg, SOFT_REQ_REG);
+	if (!cpu_is_omap15xx())
+		omap_writew(0, SOFT_REQ_REG2);
+
+	/* By default all idlect1 clocks are allowed to idle */
+	arm_idlect1_mask = ~0;
+
+	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
+		clk_preinit(c->lk.clk);
+
+	cpu_mask = 0;
+	if (cpu_is_omap1710())
+		cpu_mask |= CK_1710;
+	if (cpu_is_omap16xx())
+		cpu_mask |= CK_16XX;
+	if (cpu_is_omap1510())
+		cpu_mask |= CK_1510;
+	if (cpu_is_omap7xx())
+		cpu_mask |= CK_7XX;
+	if (cpu_is_omap310())
+		cpu_mask |= CK_310;
+
+	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
+		if (c->cpu & cpu_mask) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
+		}
+
+	/* Pointers to these clocks are needed by code in clock.c */
+	api_ck_p = clk_get(NULL, "api_ck");
+	ck_dpll1_p = clk_get(NULL, "ck_dpll1");
+	ck_ref_p = clk_get(NULL, "ck_ref");
+
+	if (cpu_is_omap7xx())
+		ck_ref.rate = 13000000;
+	if (cpu_is_omap16xx() && crystal_type == 2)
+		ck_ref.rate = 19200000;
+
+	pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
+		omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
+		omap_readw(ARM_CKCTL));
+
+	/* We want to be in syncronous scalable mode */
+	omap_writew(0x1000, ARM_SYSST);
+
+
+	/*
+	 * Initially use the values set by bootloader. Determine PLL rate and
+	 * recalculate dependent clocks as if kernel had changed PLL or
+	 * divisors. See also omap1_clk_late_init() that can reprogram dpll1
+	 * after the SRAM is initialized.
+	 */
+	{
+		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
+
+		ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
+		if (pll_ctl_val & 0x10) {
+			/* PLL enabled, apply multiplier and divisor */
+			if (pll_ctl_val & 0xf80)
+				ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
+			ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
+		} else {
+			/* PLL disabled, apply bypass divisor */
+			switch (pll_ctl_val & 0xc) {
+			case 0:
+				break;
+			case 0x4:
+				ck_dpll1.rate /= 2;
+				break;
+			default:
+				ck_dpll1.rate /= 4;
+				break;
+			}
+		}
+	}
+	propagate_rate(&ck_dpll1);
+	/* Cache rates for clocks connected to ck_ref (not dpll1) */
+	propagate_rate(&ck_ref);
+	omap1_show_rates();
+	if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
+		/* Select slicer output as OMAP input clock */
+		omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
+				OMAP7XX_PCC_UPLD_CTRL);
+	}
+
+	/* Amstrad Delta wants BCLK high when inactive */
+	if (machine_is_ams_delta())
+		omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
+				(1 << SDW_MCLK_INV_BIT),
+				ULPD_CLOCK_CTRL);
+
+	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
+	/* (on 730, bit 13 must not be cleared) */
+	if (cpu_is_omap7xx())
+		omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
+	else
+		omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
+
+	/* Put DSP/MPUI into reset until needed */
+	omap_writew(0, ARM_RSTCT1);
+	omap_writew(1, ARM_RSTCT2);
+	omap_writew(0x400, ARM_IDLECT1);
+
+	/*
+	 * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
+	 * of the ARM_IDLECT2 register must be set to zero. The power-on
+	 * default value of this bit is one.
+	 */
+	omap_writew(0x0000, ARM_IDLECT2);	/* Turn LCD clock off also */
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable(&armper_ck.clk);
+	clk_enable(&armxor_ck.clk);
+	clk_enable(&armtim_ck.clk); /* This should be done by timer code */
+
+	if (cpu_is_omap15xx())
+		clk_enable(&arm_gpio_ck);
+
+	return 0;
+}
+
+#define OMAP1_DPLL1_SANE_VALUE	60000000
+
+void __init omap1_clk_late_init(void)
+{
+	unsigned long rate = ck_dpll1.rate;
+
+	/* Find the highest supported frequency and enable it */
+	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+		pr_err("System frequencies not set, using default. Check your config.\n");
+		/*
+		 * Reprogramming the DPLL is tricky, it must be done from SRAM.
+		 */
+		omap_sram_reprogram_clock(0x2290, 0x0005);
+		ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
+	}
+	propagate_rate(&ck_dpll1);
+	omap1_show_rates();
+	loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate);
+}
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
new file mode 100644
index 000000000..732f8ee2f
--- /dev/null
+++ b/arch/arm/mach-omap1/common.h
@@ -0,0 +1,104 @@
+/*
+ *
+ * Header for code common to all OMAP1 machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
+#define __ARCH_ARM_MACH_OMAP1_COMMON_H
+
+#include <linux/mtd/mtd.h>
+#include <linux/i2c-omap.h>
+#include <linux/reboot.h>
+
+#include <plat/i2c.h>
+
+#include <mach/irqs.h>
+
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+void omap7xx_map_io(void);
+#else
+static inline void omap7xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+void omap1510_fpga_init_irq(void);
+void omap15xx_map_io(void);
+#else
+static inline void omap1510_fpga_init_irq(void)
+{
+}
+static inline void omap15xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+void omap16xx_map_io(void);
+#else
+static inline void omap16xx_map_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_OMAP_SERIAL_WAKE
+int omap_serial_wakeup_init(void);
+#else
+static inline int omap_serial_wakeup_init(void)
+{
+	return 0;
+}
+#endif
+
+void omap1_init_early(void);
+void omap1_init_irq(void);
+void omap1_init_late(void);
+void omap1_restart(enum reboot_mode, const char *);
+
+extern void __init omap_check_revision(void);
+
+extern void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
+			       unsigned int ctrl);
+
+extern void omap1_timer_init(void);
+#ifdef CONFIG_OMAP_32K_TIMER
+extern int omap_32k_timer_init(void);
+#else
+static inline int __init omap_32k_timer_init(void)
+{
+	return -ENODEV;
+}
+#endif
+
+extern u32 omap_irq_flags;
+
+#ifdef CONFIG_ARCH_OMAP16XX
+extern int ocpi_enable(void);
+#else
+static inline int ocpi_enable(void) { return 0; }
+#endif
+
+extern u32 omap1_get_reset_sources(void);
+
+#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
new file mode 100644
index 000000000..325e60300
--- /dev/null
+++ b/arch/arm/mach-omap1/devices.c
@@ -0,0 +1,478 @@
+/*
+ * linux/arch/arm/mach-omap1/devices.c
+ *
+ * OMAP1 platform device setup/initialization
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <linux/platform_data/omap-wd-timer.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/tc.h>
+#include <mach/mux.h>
+
+#include <mach/omap7xx.h>
+#include <mach/camera.h>
+#include <mach/hardware.h>
+
+#include "common.h"
+#include "clock.h"
+#include "mmc.h"
+#include "sram.h"
+
+#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
+
+static struct platform_device omap_pcm = {
+	.name	= "omap-pcm-audio",
+	.id	= -1,
+};
+
+static void omap_init_audio(void)
+{
+	platform_device_register(&omap_pcm);
+}
+
+#else
+static inline void omap_init_audio(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
+
+#define	OMAP_RTC_BASE		0xfffb4800
+
+static struct resource rtc_resources[] = {
+	{
+		.start		= OMAP_RTC_BASE,
+		.end		= OMAP_RTC_BASE + 0x5f,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= INT_RTC_TIMER,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= INT_RTC_ALARM,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device omap_rtc_device = {
+	.name           = "omap_rtc",
+	.id             = -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+static void omap_init_rtc(void)
+{
+	(void) platform_device_register(&omap_rtc_device);
+}
+#else
+static inline void omap_init_rtc(void) {}
+#endif
+
+static inline void omap_init_mbox(void) { }
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
+			int controller_nr)
+{
+	if (controller_nr == 0) {
+		if (cpu_is_omap7xx()) {
+			omap_cfg_reg(MMC_7XX_CMD);
+			omap_cfg_reg(MMC_7XX_CLK);
+			omap_cfg_reg(MMC_7XX_DAT0);
+		} else {
+			omap_cfg_reg(MMC_CMD);
+			omap_cfg_reg(MMC_CLK);
+			omap_cfg_reg(MMC_DAT0);
+		}
+
+		if (cpu_is_omap1710()) {
+			omap_cfg_reg(M15_1710_MMC_CLKI);
+			omap_cfg_reg(P19_1710_MMC_CMDDIR);
+			omap_cfg_reg(P20_1710_MMC_DATDIR0);
+		}
+		if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
+			omap_cfg_reg(MMC_DAT1);
+			/* NOTE: DAT2 can be on W10 (here) or M15 */
+			if (!mmc_controller->slots[0].nomux)
+				omap_cfg_reg(MMC_DAT2);
+			omap_cfg_reg(MMC_DAT3);
+		}
+	}
+
+	/* Block 2 is on newer chips, and has many pinout options */
+	if (cpu_is_omap16xx() && controller_nr == 1) {
+		if (!mmc_controller->slots[1].nomux) {
+			omap_cfg_reg(Y8_1610_MMC2_CMD);
+			omap_cfg_reg(Y10_1610_MMC2_CLK);
+			omap_cfg_reg(R18_1610_MMC2_CLKIN);
+			omap_cfg_reg(W8_1610_MMC2_DAT0);
+			if (mmc_controller->slots[1].wires == 4) {
+				omap_cfg_reg(V8_1610_MMC2_DAT1);
+				omap_cfg_reg(W15_1610_MMC2_DAT2);
+				omap_cfg_reg(R10_1610_MMC2_DAT3);
+			}
+
+			/* These are needed for the level shifter */
+			omap_cfg_reg(V9_1610_MMC2_CMDDIR);
+			omap_cfg_reg(V5_1610_MMC2_DATDIR0);
+			omap_cfg_reg(W19_1610_MMC2_DATDIR1);
+		}
+
+		/* Feedback clock must be set on OMAP-1710 MMC2 */
+		if (cpu_is_omap1710())
+			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
+					MOD_CONF_CTRL_1);
+	}
+}
+
+#define OMAP_MMC_NR_RES		4
+
+/*
+ * Register MMC devices.
+ */
+static int __init omap_mmc_add(const char *name, int id, unsigned long base,
+				unsigned long size, unsigned int irq,
+				unsigned rx_req, unsigned tx_req,
+				struct omap_mmc_platform_data *data)
+{
+	struct platform_device *pdev;
+	struct resource res[OMAP_MMC_NR_RES];
+	int ret;
+
+	pdev = platform_device_alloc(name, id);
+	if (!pdev)
+		return -ENOMEM;
+
+	memset(res, 0, OMAP_MMC_NR_RES * sizeof(struct resource));
+	res[0].start = base;
+	res[0].end = base + size - 1;
+	res[0].flags = IORESOURCE_MEM;
+	res[1].start = res[1].end = irq;
+	res[1].flags = IORESOURCE_IRQ;
+	res[2].start = rx_req;
+	res[2].name = "rx";
+	res[2].flags = IORESOURCE_DMA;
+	res[3].start = tx_req;
+	res[3].name = "tx";
+	res[3].flags = IORESOURCE_DMA;
+
+	if (cpu_is_omap7xx())
+		data->slots[0].features = MMC_OMAP7XX;
+	if (cpu_is_omap15xx())
+		data->slots[0].features = MMC_OMAP15XX;
+	if (cpu_is_omap16xx())
+		data->slots[0].features = MMC_OMAP16XX;
+
+	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+	if (ret == 0)
+		ret = platform_device_add_data(pdev, data, sizeof(*data));
+	if (ret)
+		goto fail;
+
+	ret = platform_device_add(pdev);
+	if (ret)
+		goto fail;
+
+	/* return device handle to board setup code */
+	data->dev = &pdev->dev;
+	return 0;
+
+fail:
+	platform_device_put(pdev);
+	return ret;
+}
+
+void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+			int nr_controllers)
+{
+	int i;
+
+	for (i = 0; i < nr_controllers; i++) {
+		unsigned long base, size;
+		unsigned rx_req, tx_req;
+		unsigned int irq = 0;
+
+		if (!mmc_data[i])
+			continue;
+
+		omap1_mmc_mux(mmc_data[i], i);
+
+		switch (i) {
+		case 0:
+			base = OMAP1_MMC1_BASE;
+			irq = INT_MMC;
+			rx_req = 22;
+			tx_req = 21;
+			break;
+		case 1:
+			if (!cpu_is_omap16xx())
+				return;
+			base = OMAP1_MMC2_BASE;
+			irq = INT_1610_MMC2;
+			rx_req = 55;
+			tx_req = 54;
+			break;
+		default:
+			continue;
+		}
+		size = OMAP1_MMC_SIZE;
+
+		omap_mmc_add("mmci-omap", i, base, size, irq,
+				rx_req, tx_req, mmc_data[i]);
+	}
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* OMAP7xx SPI support */
+#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
+
+struct platform_device omap_spi1 = {
+	.name           = "omap1_spi100k",
+	.id             = 1,
+};
+
+struct platform_device omap_spi2 = {
+	.name           = "omap1_spi100k",
+	.id             = 2,
+};
+
+static void omap_init_spi100k(void)
+{
+	omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
+	if (omap_spi1.dev.platform_data)
+		platform_device_register(&omap_spi1);
+
+	omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
+	if (omap_spi2.dev.platform_data)
+		platform_device_register(&omap_spi2);
+}
+
+#else
+static inline void omap_init_spi100k(void)
+{
+}
+#endif
+
+
+#define OMAP1_CAMERA_BASE	0xfffb6800
+#define OMAP1_CAMERA_IOSIZE	0x1c
+
+static struct resource omap1_camera_resources[] = {
+	[0] = {
+		.start	= OMAP1_CAMERA_BASE,
+		.end	= OMAP1_CAMERA_BASE + OMAP1_CAMERA_IOSIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= INT_CAMERA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 omap1_camera_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device omap1_camera_device = {
+	.name		= "omap1-camera",
+	.id		= 0, /* This is used to put cameras on this interface */
+	.dev		= {
+		.dma_mask		= &omap1_camera_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(omap1_camera_resources),
+	.resource	= omap1_camera_resources,
+};
+
+void __init omap1_camera_init(void *info)
+{
+	struct platform_device *dev = &omap1_camera_device;
+	int ret;
+
+	dev->dev.platform_data = info;
+
+	ret = platform_device_register(dev);
+	if (ret)
+		dev_err(&dev->dev, "unable to register device: %d\n", ret);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static inline void omap_init_sti(void) {}
+
+/* Numbering for the SPI-capable controllers when used for SPI:
+ * spi		= 1
+ * uwire	= 2
+ * mmc1..2	= 3..4
+ * mcbsp1..3	= 5..7
+ */
+
+#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
+
+#define	OMAP_UWIRE_BASE		0xfffb3000
+
+static struct resource uwire_resources[] = {
+	{
+		.start		= OMAP_UWIRE_BASE,
+		.end		= OMAP_UWIRE_BASE + 0x20,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap_uwire_device = {
+	.name	   = "omap_uwire",
+	.id	     = -1,
+	.num_resources	= ARRAY_SIZE(uwire_resources),
+	.resource	= uwire_resources,
+};
+
+static void omap_init_uwire(void)
+{
+	/* FIXME define and use a boot tag; not all boards will be hooking
+	 * up devices to the microwire controller, and multi-board configs
+	 * mean that CONFIG_SPI_OMAP_UWIRE may be configured anyway...
+	 */
+
+	/* board-specific code must configure chipselects (only a few
+	 * are normally used) and SCLK/SDI/SDO (each has two choices).
+	 */
+	(void) platform_device_register(&omap_uwire_device);
+}
+#else
+static inline void omap_init_uwire(void) {}
+#endif
+
+
+#define OMAP1_RNG_BASE		0xfffe5000
+
+static struct resource omap1_rng_resources[] = {
+	{
+		.start		= OMAP1_RNG_BASE,
+		.end		= OMAP1_RNG_BASE + 0x4f,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap1_rng_device = {
+	.name		= "omap_rng",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap1_rng_resources),
+	.resource	= omap1_rng_resources,
+};
+
+static void omap1_init_rng(void)
+{
+	if (!cpu_is_omap16xx())
+		return;
+
+	(void) platform_device_register(&omap1_rng_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * This gets called after board-specific INIT_MACHINE, and initializes most
+ * on-chip peripherals accessible on this board (except for few like USB):
+ *
+ *  (a) Does any "standard config" pin muxing needed.  Board-specific
+ *	code will have muxed GPIO pins and done "nonstandard" setup;
+ *	that code could live in the boot loader.
+ *  (b) Populating board-specific platform_data with the data drivers
+ *	rely on to handle wiring variations.
+ *  (c) Creating platform devices as meaningful on this board and
+ *	with this kernel configuration.
+ *
+ * Claiming GPIOs, and setting their direction and initial values, is the
+ * responsibility of the device drivers.  So is responding to probe().
+ *
+ * Board-specific knowledge like creating devices or pin setup is to be
+ * kept out of drivers as much as possible.  In particular, pin setup
+ * may be handled by the boot loader, and drivers should expect it will
+ * normally have been done by the time they're probed.
+ */
+static int __init omap1_init_devices(void)
+{
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
+	omap_sram_init();
+	omap1_clk_late_init();
+
+	/* please keep these calls, and their implementations above,
+	 * in alphabetical order so they're easier to sort through.
+	 */
+
+	omap_init_audio();
+	omap_init_mbox();
+	omap_init_rtc();
+	omap_init_spi100k();
+	omap_init_sti();
+	omap_init_uwire();
+	omap1_init_rng();
+
+	return 0;
+}
+arch_initcall(omap1_init_devices);
+
+#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
+
+static struct resource wdt_resources[] = {
+	{
+		.start		= 0xfffeb000,
+		.end		= 0xfffeb07F,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap_wdt_device = {
+	.name		= "omap_wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(wdt_resources),
+	.resource	= wdt_resources,
+};
+
+static int __init omap_init_wdt(void)
+{
+	struct omap_wd_timer_platform_data pdata;
+	int ret;
+
+	if (!cpu_is_omap16xx())
+		return -ENODEV;
+
+	pdata.read_reset_sources = omap1_get_reset_sources;
+
+	ret = platform_device_register(&omap_wdt_device);
+	if (!ret) {
+		ret = platform_device_add_data(&omap_wdt_device, &pdata,
+					       sizeof(pdata));
+		if (ret)
+			platform_device_del(&omap_wdt_device);
+	}
+
+	return ret;
+}
+subsys_initcall(omap_init_wdt);
+#endif
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
new file mode 100644
index 000000000..4be601b63
--- /dev/null
+++ b/arch/arm/mach-omap1/dma.c
@@ -0,0 +1,378 @@
+/*
+ * OMAP1/OMAP7xx - specific DMA driver
+ *
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
+ * Graphics DMA and LCD DMA graphics tranformations
+ * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
+ * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Converted DMA library into platform driver
+ *                   - G, Manjunath Kondaiah <manjugk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/omap-dma.h>
+#include <mach/tc.h>
+
+#include <mach/irqs.h>
+
+#define OMAP1_DMA_BASE			(0xfffed800)
+#define OMAP1_LOGICAL_DMA_CH_COUNT	17
+
+static u32 enable_1510_mode;
+
+static const struct omap_dma_reg reg_map[] = {
+	[GCR]		= { 0x0400, 0x00, OMAP_DMA_REG_16BIT },
+	[GSCR]		= { 0x0404, 0x00, OMAP_DMA_REG_16BIT },
+	[GRST1]		= { 0x0408, 0x00, OMAP_DMA_REG_16BIT },
+	[HW_ID]		= { 0x0442, 0x00, OMAP_DMA_REG_16BIT },
+	[PCH2_ID]	= { 0x0444, 0x00, OMAP_DMA_REG_16BIT },
+	[PCH0_ID]	= { 0x0446, 0x00, OMAP_DMA_REG_16BIT },
+	[PCH1_ID]	= { 0x0448, 0x00, OMAP_DMA_REG_16BIT },
+	[PCHG_ID]	= { 0x044a, 0x00, OMAP_DMA_REG_16BIT },
+	[PCHD_ID]	= { 0x044c, 0x00, OMAP_DMA_REG_16BIT },
+	[CAPS_0]	= { 0x044e, 0x00, OMAP_DMA_REG_2X16BIT },
+	[CAPS_1]	= { 0x0452, 0x00, OMAP_DMA_REG_2X16BIT },
+	[CAPS_2]	= { 0x0456, 0x00, OMAP_DMA_REG_16BIT },
+	[CAPS_3]	= { 0x0458, 0x00, OMAP_DMA_REG_16BIT },
+	[CAPS_4]	= { 0x045a, 0x00, OMAP_DMA_REG_16BIT },
+	[PCH2_SR]	= { 0x0460, 0x00, OMAP_DMA_REG_16BIT },
+	[PCH0_SR]	= { 0x0480, 0x00, OMAP_DMA_REG_16BIT },
+	[PCH1_SR]	= { 0x0482, 0x00, OMAP_DMA_REG_16BIT },
+	[PCHD_SR]	= { 0x04c0, 0x00, OMAP_DMA_REG_16BIT },
+
+	/* Common Registers */
+	[CSDP]		= { 0x0000, 0x40, OMAP_DMA_REG_16BIT },
+	[CCR]		= { 0x0002, 0x40, OMAP_DMA_REG_16BIT },
+	[CICR]		= { 0x0004, 0x40, OMAP_DMA_REG_16BIT },
+	[CSR]		= { 0x0006, 0x40, OMAP_DMA_REG_16BIT },
+	[CEN]		= { 0x0010, 0x40, OMAP_DMA_REG_16BIT },
+	[CFN]		= { 0x0012, 0x40, OMAP_DMA_REG_16BIT },
+	[CSFI]		= { 0x0014, 0x40, OMAP_DMA_REG_16BIT },
+	[CSEI]		= { 0x0016, 0x40, OMAP_DMA_REG_16BIT },
+	[CPC]		= { 0x0018, 0x40, OMAP_DMA_REG_16BIT },	/* 15xx only */
+	[CSAC]		= { 0x0018, 0x40, OMAP_DMA_REG_16BIT },
+	[CDAC]		= { 0x001a, 0x40, OMAP_DMA_REG_16BIT },
+	[CDEI]		= { 0x001c, 0x40, OMAP_DMA_REG_16BIT },
+	[CDFI]		= { 0x001e, 0x40, OMAP_DMA_REG_16BIT },
+	[CLNK_CTRL]	= { 0x0028, 0x40, OMAP_DMA_REG_16BIT },
+
+	/* Channel specific register offsets */
+	[CSSA]		= { 0x0008, 0x40, OMAP_DMA_REG_2X16BIT },
+	[CDSA]		= { 0x000c, 0x40, OMAP_DMA_REG_2X16BIT },
+	[COLOR]		= { 0x0020, 0x40, OMAP_DMA_REG_2X16BIT },
+	[CCR2]		= { 0x0024, 0x40, OMAP_DMA_REG_16BIT },
+	[LCH_CTRL]	= { 0x002a, 0x40, OMAP_DMA_REG_16BIT },
+};
+
+static struct resource res[] __initdata = {
+	[0] = {
+		.start	= OMAP1_DMA_BASE,
+		.end	= OMAP1_DMA_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name   = "0",
+		.start  = INT_DMA_CH0_6,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name   = "1",
+		.start  = INT_DMA_CH1_7,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[3] = {
+		.name   = "2",
+		.start  = INT_DMA_CH2_8,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[4] = {
+		.name   = "3",
+		.start  = INT_DMA_CH3,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[5] = {
+		.name   = "4",
+		.start  = INT_DMA_CH4,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[6] = {
+		.name   = "5",
+		.start  = INT_DMA_CH5,
+		.flags  = IORESOURCE_IRQ,
+	},
+	/* Handled in lcd_dma.c */
+	[7] = {
+		.name   = "6",
+		.start  = INT_1610_DMA_CH6,
+		.flags  = IORESOURCE_IRQ,
+	},
+	/* irq's for omap16xx and omap7xx */
+	[8] = {
+		.name   = "7",
+		.start  = INT_1610_DMA_CH7,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[9] = {
+		.name   = "8",
+		.start  = INT_1610_DMA_CH8,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[10] = {
+		.name  = "9",
+		.start = INT_1610_DMA_CH9,
+		.flags = IORESOURCE_IRQ,
+	},
+	[11] = {
+		.name  = "10",
+		.start = INT_1610_DMA_CH10,
+		.flags = IORESOURCE_IRQ,
+	},
+	[12] = {
+		.name  = "11",
+		.start = INT_1610_DMA_CH11,
+		.flags = IORESOURCE_IRQ,
+	},
+	[13] = {
+		.name  = "12",
+		.start = INT_1610_DMA_CH12,
+		.flags = IORESOURCE_IRQ,
+	},
+	[14] = {
+		.name  = "13",
+		.start = INT_1610_DMA_CH13,
+		.flags = IORESOURCE_IRQ,
+	},
+	[15] = {
+		.name  = "14",
+		.start = INT_1610_DMA_CH14,
+		.flags = IORESOURCE_IRQ,
+	},
+	[16] = {
+		.name  = "15",
+		.start = INT_1610_DMA_CH15,
+		.flags = IORESOURCE_IRQ,
+	},
+	[17] = {
+		.name  = "16",
+		.start = INT_DMA_LCD,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static void __iomem *dma_base;
+static inline void dma_write(u32 val, int reg, int lch)
+{
+	void __iomem *addr = dma_base;
+
+	addr += reg_map[reg].offset;
+	addr += reg_map[reg].stride * lch;
+
+	__raw_writew(val, addr);
+	if (reg_map[reg].type == OMAP_DMA_REG_2X16BIT)
+		__raw_writew(val >> 16, addr + 2);
+}
+
+static inline u32 dma_read(int reg, int lch)
+{
+	void __iomem *addr = dma_base;
+	uint32_t val;
+
+	addr += reg_map[reg].offset;
+	addr += reg_map[reg].stride * lch;
+
+	val = __raw_readw(addr);
+	if (reg_map[reg].type == OMAP_DMA_REG_2X16BIT)
+		val |= __raw_readw(addr + 2) << 16;
+
+	return val;
+}
+
+static void omap1_clear_lch_regs(int lch)
+{
+	int i;
+
+	for (i = CPC; i <= COLOR; i += 1)
+		dma_write(0, i, lch);
+}
+
+static void omap1_clear_dma(int lch)
+{
+	u32 l;
+
+	l = dma_read(CCR, lch);
+	l &= ~OMAP_DMA_CCR_EN;
+	dma_write(l, CCR, lch);
+
+	/* Clear pending interrupts */
+	l = dma_read(CSR, lch);
+}
+
+static void omap1_show_dma_caps(void)
+{
+	if (enable_1510_mode) {
+		printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
+	} else {
+		u16 w;
+		printk(KERN_INFO "OMAP DMA hardware version %d\n",
+							dma_read(HW_ID, 0));
+		printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
+			dma_read(CAPS_0, 0), dma_read(CAPS_1, 0),
+			dma_read(CAPS_2, 0), dma_read(CAPS_3, 0),
+			dma_read(CAPS_4, 0));
+
+		/* Disable OMAP 3.0/3.1 compatibility mode. */
+		w = dma_read(GSCR, 0);
+		w |= 1 << 3;
+		dma_write(w, GSCR, 0);
+	}
+	return;
+}
+
+static unsigned configure_dma_errata(void)
+{
+	unsigned errata = 0;
+
+	/*
+	 * Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is
+	 * read before the DMA controller finished disabling the channel.
+	 */
+	if (!cpu_is_omap15xx())
+		SET_DMA_ERRATA(DMA_ERRATA_3_3);
+
+	return errata;
+}
+
+static const struct platform_device_info omap_dma_dev_info = {
+	.name = "omap-dma-engine",
+	.id = -1,
+	.dma_mask = DMA_BIT_MASK(32),
+	.res = res,
+	.num_res = 1,
+};
+
+static struct omap_system_dma_plat_info dma_plat_info __initdata = {
+	.reg_map	= reg_map,
+	.channel_stride	= 0x40,
+	.show_dma_caps	= omap1_show_dma_caps,
+	.clear_lch_regs	= omap1_clear_lch_regs,
+	.clear_dma	= omap1_clear_dma,
+	.dma_write	= dma_write,
+	.dma_read	= dma_read,
+};
+
+static int __init omap1_system_dma_init(void)
+{
+	struct omap_system_dma_plat_info	p;
+	struct omap_dma_dev_attr		*d;
+	struct platform_device			*pdev, *dma_pdev;
+	int ret;
+
+	pdev = platform_device_alloc("omap_dma_system", 0);
+	if (!pdev) {
+		pr_err("%s: Unable to device alloc for dma\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	dma_base = ioremap(res[0].start, resource_size(&res[0]));
+	if (!dma_base) {
+		pr_err("%s: Unable to ioremap\n", __func__);
+		ret = -ENODEV;
+		goto exit_device_put;
+	}
+
+	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+	if (ret) {
+		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
+			__func__, pdev->name, pdev->id);
+		goto exit_iounmap;
+	}
+
+	d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
+	if (!d) {
+		dev_err(&pdev->dev, "%s: Unable to allocate 'd' for %s\n",
+			__func__, pdev->name);
+		ret = -ENOMEM;
+		goto exit_iounmap;
+	}
+
+	d->lch_count		= OMAP1_LOGICAL_DMA_CH_COUNT;
+
+	/* Valid attributes for omap1 plus processors */
+	if (cpu_is_omap15xx())
+		d->dev_caps = ENABLE_1510_MODE;
+	enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
+
+	if (cpu_is_omap16xx())
+		d->dev_caps = ENABLE_16XX_MODE;
+
+	d->dev_caps		|= SRC_PORT;
+	d->dev_caps		|= DST_PORT;
+	d->dev_caps		|= SRC_INDEX;
+	d->dev_caps		|= DST_INDEX;
+	d->dev_caps		|= IS_BURST_ONLY4;
+	d->dev_caps		|= CLEAR_CSR_ON_READ;
+	d->dev_caps		|= IS_WORD_16;
+
+	if (cpu_is_omap15xx())
+		d->chan_count = 9;
+	else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
+		if (!(d->dev_caps & ENABLE_1510_MODE))
+			d->chan_count = 16;
+		else
+			d->chan_count = 9;
+	}
+
+	p = dma_plat_info;
+	p.dma_attr = d;
+	p.errata = configure_dma_errata();
+
+	ret = platform_device_add_data(pdev, &p, sizeof(p));
+	if (ret) {
+		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
+			__func__, pdev->name, pdev->id);
+		goto exit_release_d;
+	}
+
+	ret = platform_device_add(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
+			__func__, pdev->name, pdev->id);
+		goto exit_release_d;
+	}
+
+	dma_pdev = platform_device_register_full(&omap_dma_dev_info);
+	if (IS_ERR(dma_pdev)) {
+		ret = PTR_ERR(dma_pdev);
+		goto exit_release_pdev;
+	}
+
+	return ret;
+
+exit_release_pdev:
+	platform_device_del(pdev);
+exit_release_d:
+	kfree(d);
+exit_iounmap:
+	iounmap(dma_base);
+exit_device_put:
+	platform_device_put(pdev);
+
+	return ret;
+}
+arch_initcall(omap1_system_dma_init);
diff --git a/arch/arm/mach-omap1/fb.c b/arch/arm/mach-omap1/fb.c
new file mode 100644
index 000000000..c770d45c7
--- /dev/null
+++ b/arch/arm/mach-omap1/fb.c
@@ -0,0 +1,80 @@
+/*
+ * File: arch/arm/plat-omap/fb.c
+ *
+ * Framebuffer device registration for TI OMAP platforms
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memblock.h>
+#include <linux/io.h>
+#include <linux/omapfb.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/mach/map.h>
+
+#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+
+static bool omapfb_lcd_configured;
+static struct omapfb_platform_data omapfb_config;
+
+static u64 omap_fb_dma_mask = ~(u32)0;
+
+static struct platform_device omap_fb_device = {
+	.name		= "omapfb",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &omap_fb_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &omapfb_config,
+	},
+	.num_resources = 0,
+};
+
+void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
+{
+	omapfb_config.lcd = *config;
+	omapfb_lcd_configured = true;
+}
+
+static int __init omap_init_fb(void)
+{
+	/*
+	 * If the board file has not set the lcd config with
+	 * omapfb_set_lcd_config(), don't bother registering the omapfb device
+	 */
+	if (!omapfb_lcd_configured)
+		return 0;
+
+	return platform_device_register(&omap_fb_device);
+}
+
+arch_initcall(omap_init_fb);
+
+#else
+
+void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
new file mode 100644
index 000000000..b3fb531af
--- /dev/null
+++ b/arch/arm/mach-omap1/flash.c
@@ -0,0 +1,28 @@
+/*
+ * Flash support for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+
+#include <mach/tc.h>
+#include <mach/flash.h>
+
+#include <mach/hardware.h>
+
+void omap1_set_vpp(struct platform_device *pdev, int enable)
+{
+	u32 l;
+
+	l = omap_readl(EMIFS_CONFIG);
+	if (enable)
+		l |= OMAP_EMIFS_CONFIG_WP;
+	else
+		l &= ~OMAP_EMIFS_CONFIG_WP;
+	omap_writel(l, EMIFS_CONFIG);
+}
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
new file mode 100644
index 000000000..3c0e42219
--- /dev/null
+++ b/arch/arm/mach-omap1/fpga.c
@@ -0,0 +1,190 @@
+/*
+ * linux/arch/arm/mach-omap1/fpga.c
+ *
+ * Interrupt handler for OMAP-1510 Innovator FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+#include "fpga.h"
+
+static void fpga_mask_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
+
+	if (irq < 8)
+		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO)
+			      & ~(1 << irq)), OMAP1510_FPGA_IMR_LO);
+	else if (irq < 16)
+		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
+			      & ~(1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
+	else
+		__raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
+			      & ~(1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
+}
+
+
+static inline u32 get_fpga_unmasked_irqs(void)
+{
+	return
+		((__raw_readb(OMAP1510_FPGA_ISR_LO) &
+		  __raw_readb(OMAP1510_FPGA_IMR_LO))) |
+		((__raw_readb(OMAP1510_FPGA_ISR_HI) &
+		  __raw_readb(OMAP1510_FPGA_IMR_HI)) << 8) |
+		((__raw_readb(INNOVATOR_FPGA_ISR2) &
+		  __raw_readb(INNOVATOR_FPGA_IMR2)) << 16);
+}
+
+
+static void fpga_ack_irq(struct irq_data *d)
+{
+	/* Don't need to explicitly ACK FPGA interrupts */
+}
+
+static void fpga_unmask_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;
+
+	if (irq < 8)
+		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_LO) | (1 << irq)),
+		     OMAP1510_FPGA_IMR_LO);
+	else if (irq < 16)
+		__raw_writeb((__raw_readb(OMAP1510_FPGA_IMR_HI)
+			      | (1 << (irq - 8))), OMAP1510_FPGA_IMR_HI);
+	else
+		__raw_writeb((__raw_readb(INNOVATOR_FPGA_IMR2)
+			      | (1 << (irq - 16))), INNOVATOR_FPGA_IMR2);
+}
+
+static void fpga_mask_ack_irq(struct irq_data *d)
+{
+	fpga_mask_irq(d);
+	fpga_ack_irq(d);
+}
+
+static void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
+{
+	u32 stat;
+	int fpga_irq;
+
+	stat = get_fpga_unmasked_irqs();
+
+	if (!stat)
+		return;
+
+	for (fpga_irq = OMAP_FPGA_IRQ_BASE;
+	     (fpga_irq < OMAP_FPGA_IRQ_END) && stat;
+	     fpga_irq++, stat >>= 1) {
+		if (stat & 1) {
+			generic_handle_irq(fpga_irq);
+		}
+	}
+}
+
+static struct irq_chip omap_fpga_irq_ack = {
+	.name		= "FPGA-ack",
+	.irq_ack	= fpga_mask_ack_irq,
+	.irq_mask	= fpga_mask_irq,
+	.irq_unmask	= fpga_unmask_irq,
+};
+
+
+static struct irq_chip omap_fpga_irq = {
+	.name		= "FPGA",
+	.irq_ack	= fpga_ack_irq,
+	.irq_mask	= fpga_mask_irq,
+	.irq_unmask	= fpga_unmask_irq,
+};
+
+/*
+ * All of the FPGA interrupt request inputs except for the touchscreen are
+ * edge-sensitive; the touchscreen is level-sensitive.  The edge-sensitive
+ * interrupts are acknowledged as a side-effect of reading the interrupt
+ * status register from the FPGA.  The edge-sensitive interrupt inputs
+ * cause a problem with level interrupt requests, such as Ethernet.  The
+ * problem occurs when a level interrupt request is asserted while its
+ * interrupt input is masked in the FPGA, which results in a missed
+ * interrupt.
+ *
+ * In an attempt to workaround the problem with missed interrupts, the
+ * mask_ack routine for all of the FPGA interrupts has been changed from
+ * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt
+ * being serviced is left unmasked.  We can do this because the FPGA cascade
+ * interrupt is run with all interrupts masked.
+ *
+ * Limited testing indicates that this workaround appears to be effective
+ * for the smc9194 Ethernet driver used on the Innovator.  It should work
+ * on other FPGA interrupts as well, but any drivers that explicitly mask
+ * interrupts at the interrupt controller via disable_irq/enable_irq
+ * could pose a problem.
+ */
+void omap1510_fpga_init_irq(void)
+{
+	int i, res;
+
+	__raw_writeb(0, OMAP1510_FPGA_IMR_LO);
+	__raw_writeb(0, OMAP1510_FPGA_IMR_HI);
+	__raw_writeb(0, INNOVATOR_FPGA_IMR2);
+
+	for (i = OMAP_FPGA_IRQ_BASE; i < OMAP_FPGA_IRQ_END; i++) {
+
+		if (i == OMAP1510_INT_FPGA_TS) {
+			/*
+			 * The touchscreen interrupt is level-sensitive, so
+			 * we'll use the regular mask_ack routine for it.
+			 */
+			irq_set_chip(i, &omap_fpga_irq_ack);
+		}
+		else {
+			/*
+			 * All FPGA interrupts except the touchscreen are
+			 * edge-sensitive, so we won't mask them.
+			 */
+			irq_set_chip(i, &omap_fpga_irq);
+		}
+
+		irq_set_handler(i, handle_edge_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	/*
+	 * The FPGA interrupt line is connected to GPIO13. Claim this pin for
+	 * the ARM.
+	 *
+	 * NOTE: For general GPIO/MPUIO access and interrupts, please see
+	 * gpio.[ch]
+	 */
+	res = gpio_request(13, "FPGA irq");
+	if (res) {
+		pr_err("%s failed to get gpio\n", __func__);
+		return;
+	}
+	gpio_direction_input(13);
+	irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
+	irq_set_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
+}
diff --git a/arch/arm/mach-omap1/fpga.h b/arch/arm/mach-omap1/fpga.h
new file mode 100644
index 000000000..4b4307a80
--- /dev/null
+++ b/arch/arm/mach-omap1/fpga.h
@@ -0,0 +1,52 @@
+/*
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+
+/*
+ * ---------------------------------------------------------------------------
+ *  H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE		0xE8000000		/* VA */
+#define H2P2_DBG_FPGA_SIZE		SZ_4K			/* SIZE */
+#define H2P2_DBG_FPGA_START		0x04000000		/* PA */
+
+#define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV		IOMEM(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
+#define H2P2_DBG_FPGA_GPIO		IOMEM(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS		IOMEM(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS	IOMEM(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS	IOMEM(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET		IOMEM(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
+
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN		(1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER		(1 << 14)
+#define H2P2_DBG_FPGA_LED_RED		(1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE		(1 << 12)
+/*  cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER	(1 << 0)	// A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE	11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK	((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+
+#define H2P2_DBG_FPGA_P2_LED_TIMER		(1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE		(1 << 1)
+
+#endif
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
new file mode 100644
index 000000000..312a0924d
--- /dev/null
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -0,0 +1,123 @@
+/*
+ * OMAP15xx specific gpio init
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author:
+ *	Charulatha V <charu@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
+
+#include <mach/irqs.h>
+
+#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
+#define OMAP1510_GPIO_BASE		0xFFFCE000
+
+/* gpio1 */
+static struct resource omap15xx_mpu_gpio_resources[] = {
+	{
+		.start	= OMAP1_MPUIO_VBASE,
+		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_MPUIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
+	.revision       = USHRT_MAX,
+	.direction	= OMAP_MPUIO_IO_CNTL,
+	.datain		= OMAP_MPUIO_INPUT_LATCH,
+	.dataout	= OMAP_MPUIO_OUTPUT,
+	.irqstatus	= OMAP_MPUIO_GPIO_INT,
+	.irqenable	= OMAP_MPUIO_GPIO_MASKIT,
+	.irqenable_inv	= true,
+	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
+};
+
+static struct omap_gpio_platform_data omap15xx_mpu_gpio_config = {
+	.is_mpuio		= true,
+	.bank_width		= 16,
+	.bank_stride		= 1,
+	.regs			= &omap15xx_mpuio_regs,
+};
+
+static struct platform_device omap15xx_mpu_gpio = {
+	.name           = "omap_gpio",
+	.id             = 0,
+	.dev            = {
+		.platform_data = &omap15xx_mpu_gpio_config,
+	},
+	.num_resources = ARRAY_SIZE(omap15xx_mpu_gpio_resources),
+	.resource = omap15xx_mpu_gpio_resources,
+};
+
+/* gpio2 */
+static struct resource omap15xx_gpio_resources[] = {
+	{
+		.start	= OMAP1510_GPIO_BASE,
+		.end	= OMAP1510_GPIO_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_GPIO_BANK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
+	.revision	= USHRT_MAX,
+	.direction	= OMAP1510_GPIO_DIR_CONTROL,
+	.datain		= OMAP1510_GPIO_DATA_INPUT,
+	.dataout	= OMAP1510_GPIO_DATA_OUTPUT,
+	.irqstatus	= OMAP1510_GPIO_INT_STATUS,
+	.irqenable	= OMAP1510_GPIO_INT_MASK,
+	.irqenable_inv	= true,
+	.irqctrl	= OMAP1510_GPIO_INT_CONTROL,
+	.pinctrl	= OMAP1510_GPIO_PIN_CONTROL,
+};
+
+static struct omap_gpio_platform_data omap15xx_gpio_config = {
+	.bank_width		= 16,
+	.regs                   = &omap15xx_gpio_regs,
+};
+
+static struct platform_device omap15xx_gpio = {
+	.name           = "omap_gpio",
+	.id             = 1,
+	.dev            = {
+		.platform_data = &omap15xx_gpio_config,
+	},
+	.num_resources = ARRAY_SIZE(omap15xx_gpio_resources),
+	.resource = omap15xx_gpio_resources,
+};
+
+/*
+ * omap15xx_gpio_init needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap15xx_gpio_init is a postcore_initcall.
+ */
+static int __init omap15xx_gpio_init(void)
+{
+	if (!cpu_is_omap15xx())
+		return -EINVAL;
+
+	platform_device_register(&omap15xx_mpu_gpio);
+	platform_device_register(&omap15xx_gpio);
+
+	return 0;
+}
+postcore_initcall(omap15xx_gpio_init);
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
new file mode 100644
index 000000000..6e6ec93dc
--- /dev/null
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -0,0 +1,257 @@
+/*
+ * OMAP16xx specific gpio init
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author:
+ *	Charulatha V <charu@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
+
+#include <mach/irqs.h>
+
+#define OMAP1610_GPIO1_BASE		0xfffbe400
+#define OMAP1610_GPIO2_BASE		0xfffbec00
+#define OMAP1610_GPIO3_BASE		0xfffbb400
+#define OMAP1610_GPIO4_BASE		0xfffbbc00
+#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
+
+/* smart idle, enable wakeup */
+#define SYSCONFIG_WORD			0x14
+
+/* mpu gpio */
+static struct resource omap16xx_mpu_gpio_resources[] = {
+	{
+		.start	= OMAP1_MPUIO_VBASE,
+		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_MPUIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
+	.revision       = USHRT_MAX,
+	.direction	= OMAP_MPUIO_IO_CNTL,
+	.datain		= OMAP_MPUIO_INPUT_LATCH,
+	.dataout	= OMAP_MPUIO_OUTPUT,
+	.irqstatus	= OMAP_MPUIO_GPIO_INT,
+	.irqenable	= OMAP_MPUIO_GPIO_MASKIT,
+	.irqenable_inv	= true,
+	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE,
+};
+
+static struct omap_gpio_platform_data omap16xx_mpu_gpio_config = {
+	.is_mpuio		= true,
+	.bank_width		= 16,
+	.bank_stride		= 1,
+	.regs                   = &omap16xx_mpuio_regs,
+};
+
+static struct platform_device omap16xx_mpu_gpio = {
+	.name           = "omap_gpio",
+	.id             = 0,
+	.dev            = {
+		.platform_data = &omap16xx_mpu_gpio_config,
+	},
+	.num_resources = ARRAY_SIZE(omap16xx_mpu_gpio_resources),
+	.resource = omap16xx_mpu_gpio_resources,
+};
+
+/* gpio1 */
+static struct resource omap16xx_gpio1_resources[] = {
+	{
+		.start	= OMAP1610_GPIO1_BASE,
+		.end	= OMAP1610_GPIO1_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_GPIO_BANK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
+	.revision       = OMAP1610_GPIO_REVISION,
+	.direction	= OMAP1610_GPIO_DIRECTION,
+	.set_dataout	= OMAP1610_GPIO_SET_DATAOUT,
+	.clr_dataout	= OMAP1610_GPIO_CLEAR_DATAOUT,
+	.datain		= OMAP1610_GPIO_DATAIN,
+	.dataout	= OMAP1610_GPIO_DATAOUT,
+	.irqstatus	= OMAP1610_GPIO_IRQSTATUS1,
+	.irqenable	= OMAP1610_GPIO_IRQENABLE1,
+	.set_irqenable	= OMAP1610_GPIO_SET_IRQENABLE1,
+	.clr_irqenable	= OMAP1610_GPIO_CLEAR_IRQENABLE1,
+	.wkup_en	= OMAP1610_GPIO_WAKEUPENABLE,
+	.edgectrl1	= OMAP1610_GPIO_EDGE_CTRL1,
+	.edgectrl2	= OMAP1610_GPIO_EDGE_CTRL2,
+};
+
+static struct omap_gpio_platform_data omap16xx_gpio1_config = {
+	.bank_width		= 16,
+	.regs                   = &omap16xx_gpio_regs,
+};
+
+static struct platform_device omap16xx_gpio1 = {
+	.name           = "omap_gpio",
+	.id             = 1,
+	.dev            = {
+		.platform_data = &omap16xx_gpio1_config,
+	},
+	.num_resources = ARRAY_SIZE(omap16xx_gpio1_resources),
+	.resource = omap16xx_gpio1_resources,
+};
+
+/* gpio2 */
+static struct resource omap16xx_gpio2_resources[] = {
+	{
+		.start	= OMAP1610_GPIO2_BASE,
+		.end	= OMAP1610_GPIO2_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_1610_GPIO_BANK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_gpio_platform_data omap16xx_gpio2_config = {
+	.bank_width		= 16,
+	.regs                   = &omap16xx_gpio_regs,
+};
+
+static struct platform_device omap16xx_gpio2 = {
+	.name           = "omap_gpio",
+	.id             = 2,
+	.dev            = {
+		.platform_data = &omap16xx_gpio2_config,
+	},
+	.num_resources = ARRAY_SIZE(omap16xx_gpio2_resources),
+	.resource = omap16xx_gpio2_resources,
+};
+
+/* gpio3 */
+static struct resource omap16xx_gpio3_resources[] = {
+	{
+		.start	= OMAP1610_GPIO3_BASE,
+		.end	= OMAP1610_GPIO3_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_1610_GPIO_BANK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_gpio_platform_data omap16xx_gpio3_config = {
+	.bank_width		= 16,
+	.regs                   = &omap16xx_gpio_regs,
+};
+
+static struct platform_device omap16xx_gpio3 = {
+	.name           = "omap_gpio",
+	.id             = 3,
+	.dev            = {
+		.platform_data = &omap16xx_gpio3_config,
+	},
+	.num_resources = ARRAY_SIZE(omap16xx_gpio3_resources),
+	.resource = omap16xx_gpio3_resources,
+};
+
+/* gpio4 */
+static struct resource omap16xx_gpio4_resources[] = {
+	{
+		.start	= OMAP1610_GPIO4_BASE,
+		.end	= OMAP1610_GPIO4_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_1610_GPIO_BANK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_gpio_platform_data omap16xx_gpio4_config = {
+	.bank_width		= 16,
+	.regs                   = &omap16xx_gpio_regs,
+};
+
+static struct platform_device omap16xx_gpio4 = {
+	.name           = "omap_gpio",
+	.id             = 4,
+	.dev            = {
+		.platform_data = &omap16xx_gpio4_config,
+	},
+	.num_resources = ARRAY_SIZE(omap16xx_gpio4_resources),
+	.resource = omap16xx_gpio4_resources,
+};
+
+static struct platform_device *omap16xx_gpio_dev[] __initdata = {
+	&omap16xx_mpu_gpio,
+	&omap16xx_gpio1,
+	&omap16xx_gpio2,
+	&omap16xx_gpio3,
+	&omap16xx_gpio4,
+};
+
+/*
+ * omap16xx_gpio_init needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap16xx_gpio_init is a postcore_initcall.
+ */
+static int __init omap16xx_gpio_init(void)
+{
+	int i;
+	void __iomem *base;
+	struct resource *res;
+	struct platform_device *pdev;
+	struct omap_gpio_platform_data *pdata;
+
+	if (!cpu_is_omap16xx())
+		return -EINVAL;
+
+	/*
+	 * Enable system clock for GPIO module.
+	 * The CAM_CLK_CTRL *is* really the right place.
+	 */
+	omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
+					ULPD_CAM_CLK_CTRL);
+
+	for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) {
+		pdev = omap16xx_gpio_dev[i];
+		pdata = pdev->dev.platform_data;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (unlikely(!res)) {
+			dev_err(&pdev->dev, "Invalid mem resource.\n");
+			return -ENODEV;
+		}
+
+		base = ioremap(res->start, resource_size(res));
+		if (unlikely(!base)) {
+			dev_err(&pdev->dev, "ioremap failed.\n");
+			return -ENOMEM;
+		}
+
+		__raw_writel(SYSCONFIG_WORD, base + OMAP1610_GPIO_SYSCONFIG);
+		iounmap(base);
+
+		platform_device_register(omap16xx_gpio_dev[i]);
+	}
+
+	return 0;
+}
+postcore_initcall(omap16xx_gpio_init);
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
new file mode 100644
index 000000000..4612d2506
--- /dev/null
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -0,0 +1,279 @@
+/*
+ * OMAP7xx specific gpio init
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author:
+ *	Charulatha V <charu@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
+
+#include <mach/irqs.h>
+
+#define OMAP7XX_GPIO1_BASE		0xfffbc000
+#define OMAP7XX_GPIO2_BASE		0xfffbc800
+#define OMAP7XX_GPIO3_BASE		0xfffbd000
+#define OMAP7XX_GPIO4_BASE		0xfffbd800
+#define OMAP7XX_GPIO5_BASE		0xfffbe000
+#define OMAP7XX_GPIO6_BASE		0xfffbe800
+#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
+
+/* mpu gpio */
+static struct resource omap7xx_mpu_gpio_resources[] = {
+	{
+		.start	= OMAP1_MPUIO_VBASE,
+		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_MPUIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
+	.revision	= USHRT_MAX,
+	.direction	= OMAP_MPUIO_IO_CNTL / 2,
+	.datain		= OMAP_MPUIO_INPUT_LATCH / 2,
+	.dataout	= OMAP_MPUIO_OUTPUT / 2,
+	.irqstatus	= OMAP_MPUIO_GPIO_INT / 2,
+	.irqenable	= OMAP_MPUIO_GPIO_MASKIT / 2,
+	.irqenable_inv	= true,
+	.irqctrl	= OMAP_MPUIO_GPIO_INT_EDGE >> 1,
+};
+
+static struct omap_gpio_platform_data omap7xx_mpu_gpio_config = {
+	.is_mpuio		= true,
+	.bank_width		= 16,
+	.bank_stride		= 2,
+	.regs                   = &omap7xx_mpuio_regs,
+};
+
+static struct platform_device omap7xx_mpu_gpio = {
+	.name           = "omap_gpio",
+	.id             = 0,
+	.dev            = {
+		.platform_data = &omap7xx_mpu_gpio_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_mpu_gpio_resources),
+	.resource = omap7xx_mpu_gpio_resources,
+};
+
+/* gpio1 */
+static struct resource omap7xx_gpio1_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO1_BASE,
+		.end	= OMAP7XX_GPIO1_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
+	.revision	= USHRT_MAX,
+	.direction	= OMAP7XX_GPIO_DIR_CONTROL,
+	.datain		= OMAP7XX_GPIO_DATA_INPUT,
+	.dataout	= OMAP7XX_GPIO_DATA_OUTPUT,
+	.irqstatus	= OMAP7XX_GPIO_INT_STATUS,
+	.irqenable	= OMAP7XX_GPIO_INT_MASK,
+	.irqenable_inv	= true,
+	.irqctrl	= OMAP7XX_GPIO_INT_CONTROL,
+};
+
+static struct omap_gpio_platform_data omap7xx_gpio1_config = {
+	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
+};
+
+static struct platform_device omap7xx_gpio1 = {
+	.name           = "omap_gpio",
+	.id             = 1,
+	.dev            = {
+		.platform_data = &omap7xx_gpio1_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio1_resources),
+	.resource = omap7xx_gpio1_resources,
+};
+
+/* gpio2 */
+static struct resource omap7xx_gpio2_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO2_BASE,
+		.end	= OMAP7XX_GPIO2_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_gpio_platform_data omap7xx_gpio2_config = {
+	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
+};
+
+static struct platform_device omap7xx_gpio2 = {
+	.name           = "omap_gpio",
+	.id             = 2,
+	.dev            = {
+		.platform_data = &omap7xx_gpio2_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio2_resources),
+	.resource = omap7xx_gpio2_resources,
+};
+
+/* gpio3 */
+static struct resource omap7xx_gpio3_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO3_BASE,
+		.end	= OMAP7XX_GPIO3_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_gpio_platform_data omap7xx_gpio3_config = {
+	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
+};
+
+static struct platform_device omap7xx_gpio3 = {
+	.name           = "omap_gpio",
+	.id             = 3,
+	.dev            = {
+		.platform_data = &omap7xx_gpio3_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio3_resources),
+	.resource = omap7xx_gpio3_resources,
+};
+
+/* gpio4 */
+static struct resource omap7xx_gpio4_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO4_BASE,
+		.end	= OMAP7XX_GPIO4_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_gpio_platform_data omap7xx_gpio4_config = {
+	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
+};
+
+static struct platform_device omap7xx_gpio4 = {
+	.name           = "omap_gpio",
+	.id             = 4,
+	.dev            = {
+		.platform_data = &omap7xx_gpio4_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio4_resources),
+	.resource = omap7xx_gpio4_resources,
+};
+
+/* gpio5 */
+static struct resource omap7xx_gpio5_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO5_BASE,
+		.end	= OMAP7XX_GPIO5_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK5,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_gpio_platform_data omap7xx_gpio5_config = {
+	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
+};
+
+static struct platform_device omap7xx_gpio5 = {
+	.name           = "omap_gpio",
+	.id             = 5,
+	.dev            = {
+		.platform_data = &omap7xx_gpio5_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio5_resources),
+	.resource = omap7xx_gpio5_resources,
+};
+
+/* gpio6 */
+static struct resource omap7xx_gpio6_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO6_BASE,
+		.end	= OMAP7XX_GPIO6_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_gpio_platform_data omap7xx_gpio6_config = {
+	.bank_width		= 32,
+	.regs			= &omap7xx_gpio_regs,
+};
+
+static struct platform_device omap7xx_gpio6 = {
+	.name           = "omap_gpio",
+	.id             = 6,
+	.dev            = {
+		.platform_data = &omap7xx_gpio6_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio6_resources),
+	.resource = omap7xx_gpio6_resources,
+};
+
+static struct platform_device *omap7xx_gpio_dev[] __initdata = {
+	&omap7xx_mpu_gpio,
+	&omap7xx_gpio1,
+	&omap7xx_gpio2,
+	&omap7xx_gpio3,
+	&omap7xx_gpio4,
+	&omap7xx_gpio5,
+	&omap7xx_gpio6,
+};
+
+/*
+ * omap7xx_gpio_init needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap7xx_gpio_init is a postcore_initcall.
+ */
+static int __init omap7xx_gpio_init(void)
+{
+	int i;
+
+	if (!cpu_is_omap7xx())
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++)
+		platform_device_register(omap7xx_gpio_dev[i]);
+
+	return 0;
+}
+postcore_initcall(omap7xx_gpio_init);
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
new file mode 100644
index 000000000..7f5761cff
--- /dev/null
+++ b/arch/arm/mach-omap1/i2c.c
@@ -0,0 +1,99 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/i2c-omap.h>
+#include <mach/mux.h>
+#include "soc.h"
+
+#include <plat/i2c.h>
+
+#define OMAP_I2C_SIZE		0x3f
+#define OMAP1_I2C_BASE		0xfffb3800
+#define OMAP1_INT_I2C		(32 + 4)
+
+static const char name[] = "omap_i2c";
+
+static struct resource i2c_resources[2] = {
+};
+
+static struct platform_device omap_i2c_devices[1] = {
+};
+
+static void __init omap1_i2c_mux_pins(int bus_id)
+{
+	if (cpu_is_omap7xx()) {
+		omap_cfg_reg(I2C_7XX_SDA);
+		omap_cfg_reg(I2C_7XX_SCL);
+	} else {
+		omap_cfg_reg(I2C_SDA);
+		omap_cfg_reg(I2C_SCL);
+	}
+}
+
+int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
+				int bus_id)
+{
+	struct platform_device *pdev;
+	struct resource *res;
+
+	if (bus_id > 1)
+		return -EINVAL;
+
+	omap1_i2c_mux_pins(bus_id);
+
+	pdev = &omap_i2c_devices[bus_id - 1];
+	pdev->id = bus_id;
+	pdev->name = name;
+	pdev->num_resources = ARRAY_SIZE(i2c_resources);
+	res = i2c_resources;
+	res[0].start = OMAP1_I2C_BASE;
+	res[0].end = res[0].start + OMAP_I2C_SIZE;
+	res[0].flags = IORESOURCE_MEM;
+	res[1].start = OMAP1_INT_I2C;
+	res[1].flags = IORESOURCE_IRQ;
+	pdev->resource = res;
+
+	/* all OMAP1 have IP version 1 register set */
+	pdata->rev = OMAP_I2C_IP_VERSION_1;
+
+	/* all OMAP1 I2C are implemented like this */
+	pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
+		       OMAP_I2C_FLAG_SIMPLE_CLOCK |
+		       OMAP_I2C_FLAG_16BIT_DATA_REG |
+		       OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
+
+	/* how the cpu bus is wired up differs for 7xx only */
+
+	if (cpu_is_omap7xx())
+		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
+	else
+		pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
+
+	pdev->dev.platform_data = pdata;
+
+	return platform_device_register(pdev);
+}
+
+static  int __init omap_i2c_cmdline(void)
+{
+	return omap_register_i2c_bus_cmdline();
+}
+subsys_initcall(omap_i2c_cmdline);
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
new file mode 100644
index 000000000..52de382fc
--- /dev/null
+++ b/arch/arm/mach-omap1/id.c
@@ -0,0 +1,210 @@
+/*
+ * linux/arch/arm/mach-omap1/id.c
+ *
+ * OMAP1 CPU identification code
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/system_info.h>
+
+#include "soc.h"
+
+#include <mach/hardware.h>
+
+#include "common.h"
+
+#define OMAP_DIE_ID_0		0xfffe1800
+#define OMAP_DIE_ID_1		0xfffe1804
+#define OMAP_PRODUCTION_ID_0	0xfffe2000
+#define OMAP_PRODUCTION_ID_1	0xfffe2004
+#define OMAP32_ID_0		0xfffed400
+#define OMAP32_ID_1		0xfffed404
+
+struct omap_id {
+	u16	jtag_id;	/* Used to determine OMAP type */
+	u8	die_rev;	/* Processor revision */
+	u32	omap_id;	/* OMAP revision */
+	u32	type;		/* Cpu id bits [31:08], cpu class bits [07:00] */
+};
+
+static unsigned int omap_revision;
+
+/* Register values to detect the OMAP version */
+static struct omap_id omap_ids[] __initdata = {
+	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
+	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
+	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
+	{ .jtag_id = 0xb62c, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x08500000},
+	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
+	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
+	{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
+	{ .jtag_id = 0xb576, .die_rev = 0x3, .omap_id = 0x03320100, .type = 0x16100c00},
+	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320200, .type = 0x16100d00},
+	{ .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
+	{ .jtag_id = 0xb613, .die_rev = 0x0, .omap_id = 0x03320300, .type = 0x1610ef00},
+	{ .jtag_id = 0xb576, .die_rev = 0x1, .omap_id = 0x03320100, .type = 0x16110000},
+	{ .jtag_id = 0xb58c, .die_rev = 0x2, .omap_id = 0x03320200, .type = 0x16110b00},
+	{ .jtag_id = 0xb58c, .die_rev = 0x3, .omap_id = 0x03320200, .type = 0x16110c00},
+	{ .jtag_id = 0xb65f, .die_rev = 0x0, .omap_id = 0x03320400, .type = 0x16212300},
+	{ .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320400, .type = 0x16212300},
+	{ .jtag_id = 0xb65f, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x16212300},
+	{ .jtag_id = 0xb5f7, .die_rev = 0x0, .omap_id = 0x03330000, .type = 0x17100000},
+	{ .jtag_id = 0xb5f7, .die_rev = 0x1, .omap_id = 0x03330100, .type = 0x17100000},
+	{ .jtag_id = 0xb5f7, .die_rev = 0x2, .omap_id = 0x03330100, .type = 0x17100000},
+};
+
+unsigned int omap_rev(void)
+{
+	return omap_revision;
+}
+EXPORT_SYMBOL(omap_rev);
+
+/*
+ * Get OMAP type from PROD_ID.
+ * 1710 has the PROD_ID in bits 15:00, not in 16:01 as documented in TRM.
+ * 1510 PROD_ID is empty, and 1610 PROD_ID does not make sense.
+ * Undocumented register in TEST BLOCK is used as fallback; This seems to
+ * work on 1510, 1610 & 1710. The official way hopefully will work in future
+ * processors.
+ */
+static u16 __init omap_get_jtag_id(void)
+{
+	u32 prod_id, omap_id;
+
+	prod_id = omap_readl(OMAP_PRODUCTION_ID_1);
+	omap_id = omap_readl(OMAP32_ID_1);
+
+	/* Check for unusable OMAP_PRODUCTION_ID_1 on 1611B/5912 and 730/850 */
+	if (((prod_id >> 20) == 0) || (prod_id == omap_id))
+		prod_id = 0;
+	else
+		prod_id &= 0xffff;
+
+	if (prod_id)
+		return prod_id;
+
+	/* Use OMAP32_ID_1 as fallback */
+	prod_id = ((omap_id >> 12) & 0xffff);
+
+	return prod_id;
+}
+
+/*
+ * Get OMAP revision from DIE_REV.
+ * Early 1710 processors may have broken OMAP_DIE_ID, it contains PROD_ID.
+ * Undocumented register in the TEST BLOCK is used as fallback.
+ * REVISIT: This does not seem to work on 1510
+ */
+static u8 __init omap_get_die_rev(void)
+{
+	u32 die_rev;
+
+	die_rev = omap_readl(OMAP_DIE_ID_1);
+
+	/* Check for broken OMAP_DIE_ID on early 1710 */
+	if (((die_rev >> 12) & 0xffff) == omap_get_jtag_id())
+		die_rev = 0;
+
+	die_rev = (die_rev >> 17) & 0xf;
+	if (die_rev)
+		return die_rev;
+
+	die_rev = (omap_readl(OMAP32_ID_1) >> 28) & 0xf;
+
+	return die_rev;
+}
+
+void __init omap_check_revision(void)
+{
+	int i;
+	u16 jtag_id;
+	u8 die_rev;
+	u32 omap_id;
+	u8 cpu_type;
+
+	jtag_id = omap_get_jtag_id();
+	die_rev = omap_get_die_rev();
+	omap_id = omap_readl(OMAP32_ID_0);
+
+#ifdef DEBUG
+	printk(KERN_DEBUG "OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
+	printk(KERN_DEBUG "OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
+		omap_readl(OMAP_DIE_ID_1),
+	       (omap_readl(OMAP_DIE_ID_1) >> 17) & 0xf);
+	printk(KERN_DEBUG "OMAP_PRODUCTION_ID_0: 0x%08x\n",
+		omap_readl(OMAP_PRODUCTION_ID_0));
+	printk(KERN_DEBUG "OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
+		omap_readl(OMAP_PRODUCTION_ID_1),
+		omap_readl(OMAP_PRODUCTION_ID_1) & 0xffff);
+	printk(KERN_DEBUG "OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
+	printk(KERN_DEBUG "OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
+	printk(KERN_DEBUG "JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
+#endif
+
+	system_serial_high = omap_readl(OMAP_DIE_ID_0);
+	system_serial_low = omap_readl(OMAP_DIE_ID_1);
+
+	/* First check only the major version in a safe way */
+	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+		if (jtag_id == (omap_ids[i].jtag_id)) {
+			omap_revision = omap_ids[i].type;
+			break;
+		}
+	}
+
+	/* Check if we can find the die revision */
+	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+		if (jtag_id == omap_ids[i].jtag_id && die_rev == omap_ids[i].die_rev) {
+			omap_revision = omap_ids[i].type;
+			break;
+		}
+	}
+
+	/* Finally check also the omap_id */
+	for (i = 0; i < ARRAY_SIZE(omap_ids); i++) {
+		if (jtag_id == omap_ids[i].jtag_id
+		    && die_rev == omap_ids[i].die_rev
+		    && omap_id == omap_ids[i].omap_id) {
+			omap_revision = omap_ids[i].type;
+			break;
+		}
+	}
+
+	/* Add the cpu class info (7xx, 15xx, 16xx, 24xx) */
+	cpu_type = omap_revision >> 24;
+
+	switch (cpu_type) {
+	case 0x07:
+	case 0x08:
+		omap_revision |= 0x07;
+		break;
+	case 0x03:
+	case 0x15:
+		omap_revision |= 0x15;
+		break;
+	case 0x16:
+	case 0x17:
+		omap_revision |= 0x16;
+		break;
+	default:
+		printk(KERN_INFO "Unknown OMAP cpu type: 0x%02x\n", cpu_type);
+	}
+
+	printk(KERN_INFO "OMAP%04x", omap_revision >> 16);
+	if ((omap_revision >> 8) & 0xff)
+		printk(KERN_INFO "%x", (omap_revision >> 8) & 0xff);
+	printk(KERN_INFO " revision %i handled as %02xxx id: %08x%08x\n",
+	       die_rev, omap_revision & 0xff, system_serial_low,
+	       system_serial_high);
+}
+
diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
new file mode 100644
index 000000000..adb5e7649
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-omap1/include/ams-delta-fiq.h
+ *
+ * Taken from the original Amstrad modifications to fiq.h
+ *
+ * Copyright (c) 2004 Amstrad Plc
+ * Copyright (c) 2006 Matt Callow
+ * Copyright (c) 2010 Janusz Krzysztofik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __AMS_DELTA_FIQ_H
+#define __AMS_DELTA_FIQ_H
+
+/*
+ * Interrupt number used for passing control from FIQ to IRQ.
+ * IRQ12, described as reserved, has been selected.
+ */
+#define INT_DEFERRED_FIQ	INT_1510_RES12
+/*
+ * Base address of an interrupt handler that the INT_DEFERRED_FIQ belongs to.
+ */
+#if (INT_DEFERRED_FIQ < IH2_BASE)
+#define DEFERRED_FIQ_IH_BASE	OMAP_IH1_BASE
+#else
+#define DEFERRED_FIQ_IH_BASE	OMAP_IH2_BASE
+#endif
+
+/*
+ * These are the offsets from the beginning of the fiq_buffer. They are put here
+ * since the buffer and header need to be accessed by drivers servicing devices
+ * which generate GPIO interrupts - e.g. keyboard, modem, hook switch.
+ */
+#define FIQ_MASK		 0
+#define FIQ_STATE		 1
+#define FIQ_KEYS_CNT		 2
+#define FIQ_TAIL_OFFSET		 3
+#define FIQ_HEAD_OFFSET		 4
+#define FIQ_BUF_LEN		 5
+#define FIQ_KEY			 6
+#define FIQ_MISSED_KEYS		 7
+#define FIQ_BUFFER_START	 8
+#define FIQ_GPIO_INT_MASK	 9
+#define FIQ_KEYS_HICNT		10
+#define FIQ_IRQ_PEND		11
+#define FIQ_SIR_CODE_L1		12
+#define IRQ_SIR_CODE_L2		13
+
+#define FIQ_CNT_INT_00		14
+#define FIQ_CNT_INT_KEY		15
+#define FIQ_CNT_INT_MDM		16
+#define FIQ_CNT_INT_03		17
+#define FIQ_CNT_INT_HSW		18
+#define FIQ_CNT_INT_05		19
+#define FIQ_CNT_INT_06		20
+#define FIQ_CNT_INT_07		21
+#define FIQ_CNT_INT_08		22
+#define FIQ_CNT_INT_09		23
+#define FIQ_CNT_INT_10		24
+#define FIQ_CNT_INT_11		25
+#define FIQ_CNT_INT_12		26
+#define FIQ_CNT_INT_13		27
+#define FIQ_CNT_INT_14		28
+#define FIQ_CNT_INT_15		29
+
+#define FIQ_CIRC_BUFF		30      /*Start of circular buffer */
+
+#ifndef __ASSEMBLER__
+extern unsigned int fiq_buffer[];
+extern unsigned char qwerty_fiqin_start, qwerty_fiqin_end;
+
+extern void __init ams_delta_init_fiq(void);
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/board-ams-delta.h b/arch/arm/mach-omap1/include/mach/board-ams-delta.h
new file mode 100644
index 000000000..ad6f865d1
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/board-ams-delta.h
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-ams-delta.h
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
+#define __ASM_ARCH_OMAP_AMS_DELTA_H
+
+#if defined (CONFIG_MACH_AMS_DELTA)
+
+#define AMD_DELTA_LATCH2_SCARD_RSTIN	0x0400
+#define AMD_DELTA_LATCH2_SCARD_CMDVCC	0x0800
+#define AMS_DELTA_LATCH2_MODEM_CODEC	0x2000
+
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA	0
+#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK	1
+#define AMS_DELTA_GPIO_PIN_MODEM_IRQ	2
+#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH	4
+#define AMS_DELTA_GPIO_PIN_SCARD_NOFF	6
+#define AMS_DELTA_GPIO_PIN_SCARD_IO	7
+#define AMS_DELTA_GPIO_PIN_CONFIG	11
+#define AMS_DELTA_GPIO_PIN_NAND_RB	12
+
+#define AMS_DELTA_GPIO_PIN_LCD_VBLEN		240
+#define AMS_DELTA_GPIO_PIN_LCD_NDISP		241
+#define AMS_DELTA_GPIO_PIN_NAND_NCE		242
+#define AMS_DELTA_GPIO_PIN_NAND_NRE		243
+#define AMS_DELTA_GPIO_PIN_NAND_NWP		244
+#define AMS_DELTA_GPIO_PIN_NAND_NWE		245
+#define AMS_DELTA_GPIO_PIN_NAND_ALE		246
+#define AMS_DELTA_GPIO_PIN_NAND_CLE		247
+#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR		248
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT	249
+#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN		250
+#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC		251
+#define AMS_DELTA_GPIO_PIN_MODEM_NRESET		252
+#define AMS_DELTA_GPIO_PIN_MODEM_CODEC		253
+
+#define AMS_DELTA_LATCH2_GPIO_BASE	AMS_DELTA_GPIO_PIN_LCD_VBLEN
+#define AMS_DELTA_LATCH2_NGPIO		16
+
+#ifndef __ASSEMBLY__
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
+#define ams_delta_latch2_write(mask, value) \
+	ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
+			AMS_DELTA_LATCH2_NGPIO, (mask), (value))
+#endif
+
+#endif /* CONFIG_MACH_AMS_DELTA */
+
+#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/arch/arm/mach-omap1/include/mach/board-sx1.h b/arch/arm/mach-omap1/include/mach/board-sx1.h
new file mode 100644
index 000000000..355adbdaa
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/board-sx1.h
@@ -0,0 +1,52 @@
+/*
+ * Siemens SX1 board definitions
+ *
+ * Copyright: Vovan888 at gmail com
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H
+#define __ASM_ARCH_SX1_I2C_CHIPS_H
+
+#define SOFIA_MAX_LIGHT_VAL	0x2B
+
+#define SOFIA_I2C_ADDR		0x32
+/* Sofia reg 3 bits masks */
+#define SOFIA_POWER1_REG	0x03
+
+#define	SOFIA_USB_POWER		0x01
+#define	SOFIA_MMC_POWER		0x04
+#define	SOFIA_BLUETOOTH_POWER	0x08
+#define	SOFIA_MMILIGHT_POWER	0x20
+
+#define SOFIA_POWER2_REG	0x04
+#define SOFIA_BACKLIGHT_REG	0x06
+#define SOFIA_KEYLIGHT_REG	0x07
+#define SOFIA_DIMMING_REG	0x09
+
+
+/* Function Prototypes for SX1 devices control on I2C bus */
+
+int sx1_setbacklight(u8 backlight);
+int sx1_getbacklight(u8 *backlight);
+int sx1_setkeylight(u8 keylight);
+int sx1_getkeylight(u8 *keylight);
+
+int sx1_setmmipower(u8 onoff);
+int sx1_setusbpower(u8 onoff);
+int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value);
+int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value);
+
+/* MMC prototypes */
+
+extern void sx1_mmc_init(void);
+extern void sx1_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */
diff --git a/arch/arm/mach-omap1/include/mach/board-voiceblue.h b/arch/arm/mach-omap1/include/mach/board-voiceblue.h
new file mode 100644
index 000000000..27916b210
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/board-voiceblue.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Hardware definitions for OMAP5910 based VoiceBlue board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VOICEBLUE_H
+#define __ASM_ARCH_VOICEBLUE_H
+
+extern void voiceblue_wdt_enable(void);
+extern void voiceblue_wdt_disable(void);
+extern void voiceblue_wdt_ping(void);
+
+#endif /*  __ASM_ARCH_VOICEBLUE_H */
+
diff --git a/arch/arm/mach-omap1/include/mach/camera.h b/arch/arm/mach-omap1/include/mach/camera.h
new file mode 100644
index 000000000..847d00f0b
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/camera.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+#include <media/omap1_camera.h>
+
+void omap1_camera_init(void *);
+
+static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info)
+{
+	omap1_camera_init(info);
+}
+
+#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S
new file mode 100644
index 000000000..78a8c6c24
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-omap1/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for OMAP-based platforms
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
+		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
+		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
+		mov	\irqstat, #0xffffffff
+		bic	\tmp, \irqstat, \tmp
+		tst	\irqnr, \tmp
+		beq	1510f
+
+		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
+		ldr	\tmp, =omap_irq_flags	@ irq flags address
+		ldr	\tmp, [\tmp, #0]	@ irq flags value
+		cmp	\irqnr, #0
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		cmpeq	\irqnr, \tmp
+		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		addeqs	\irqnr, \irqnr, #32
+1510:
+		.endm
+
diff --git a/arch/arm/mach-omap1/include/mach/flash.h b/arch/arm/mach-omap1/include/mach/flash.h
new file mode 100644
index 000000000..0d88499b7
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/flash.h
@@ -0,0 +1,17 @@
+/*
+ * Flash support for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_FLASH_H
+#define __OMAP_FLASH_H
+
+#include <linux/mtd/map.h>
+
+struct platform_device;
+extern void omap1_set_vpp(struct platform_device *pdev, int enable);
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
new file mode 100644
index 000000000..5875a5098
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -0,0 +1,321 @@
+/*
+ * arch/arm/mach-omap1/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *	 file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+
+#include <asm/sizes.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <mach/soc.h>
+
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+extern u8 omap_readb(u32 pa);
+extern u16 omap_readw(u32 pa);
+extern u32 omap_readl(u32 pa);
+extern void omap_writeb(u8 v, u32 pa);
+extern void omap_writew(u16 v, u32 pa);
+extern void omap_writel(u32 v, u32 pa);
+
+#include <mach/tc.h>
+
+/* Almost all documentation for chip and board memory maps assumes
+ * BM is clear.  Most devel boards have a switch to control booting
+ * from NOR flash (using external chipselect 3) rather than mask ROM,
+ * which uses BM to interchange the physical CS0 and CS3 addresses.
+ */
+static inline u32 omap_cs0m_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			?  OMAP_CS3_PHYS : 0;
+}
+
+static inline u32 omap_cs3_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			? 0 : OMAP_CS3_PHYS;
+}
+
+#endif	/* ifndef __ASSEMBLER__ */
+
+#define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
+
+#include <mach/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *	 files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
+#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
+#define MPU_TIMER_FREE		(1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
+#define MPU_TIMER_AR		(1 << 1)
+#define MPU_TIMER_ST		(1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE		(0xfffece00)
+#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF		1
+#define CK_IDLEF		2
+#define CK_ENABLEF		4
+#define CK_SELECTF		8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL		(0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE     IOMEM(0xe1008000)
+#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE		(0xfffe0800)
+#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
+#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
+#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
+#	define SOFT_UDC_REQ		(1 << 4)
+#	define SOFT_USB_CLK_REQ		(1 << 3)
+#	define SOFT_DPLL_REQ		(1 << 0)
+#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
+#	define DIS_MMC2_DPLL_REQ	(1 << 11)
+#	define DIS_MMC1_DPLL_REQ	(1 << 10)
+#	define DIS_UART3_DPLL_REQ	(1 << 9)
+#	define DIS_UART2_DPLL_REQ	(1 << 8)
+#	define DIS_UART1_DPLL_REQ	(1 << 7)
+#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
+#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE		0xfffecb00
+#define OMAP_IH2_BASE		0xfffe0000
+
+#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET	0x00
+#define IRQ_MIR_REG_OFFSET	0x04
+#define IRQ_SIR_IRQ_REG_OFFSET	0x10
+#define IRQ_SIR_FIQ_REG_OFFSET	0x14
+#define IRQ_CONTROL_REG_OFFSET	0x18
+#define IRQ_ISR_REG_OFFSET	0x9c
+#define IRQ_ILR0_REG_OFFSET	0x1c
+#define IRQ_GMR_REG_OFFSET	0xa0
+
+#endif
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0		0xfffe1080
+#define MOD_CONF_CTRL_1		0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0		0xfffe1000
+#define FUNC_MUX_CTRL_1		0xfffe1004
+#define FUNC_MUX_CTRL_2		0xfffe1008
+#define COMP_MODE_CTRL_0	0xfffe100c
+#define FUNC_MUX_CTRL_3		0xfffe1010
+#define FUNC_MUX_CTRL_4		0xfffe1014
+#define FUNC_MUX_CTRL_5		0xfffe1018
+#define FUNC_MUX_CTRL_6		0xfffe101C
+#define FUNC_MUX_CTRL_7		0xfffe1020
+#define FUNC_MUX_CTRL_8		0xfffe1024
+#define FUNC_MUX_CTRL_9		0xfffe1028
+#define FUNC_MUX_CTRL_A		0xfffe102C
+#define FUNC_MUX_CTRL_B		0xfffe1030
+#define FUNC_MUX_CTRL_C		0xfffe1034
+#define FUNC_MUX_CTRL_D		0xfffe1038
+#define PULL_DWN_CTRL_0		0xfffe1040
+#define PULL_DWN_CTRL_1		0xfffe1044
+#define PULL_DWN_CTRL_2		0xfffe1048
+#define PULL_DWN_CTRL_3		0xfffe104c
+#define PULL_DWN_CTRL_4		0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E		0xfffe1090
+#define FUNC_MUX_CTRL_F		0xfffe1094
+#define FUNC_MUX_CTRL_10	0xfffe1098
+#define FUNC_MUX_CTRL_11	0xfffe109c
+#define FUNC_MUX_CTRL_12	0xfffe10a0
+#define PU_PD_SEL_0		0xfffe10b4
+#define PU_PD_SEL_1		0xfffe10b8
+#define PU_PD_SEL_2		0xfffe10bc
+#define PU_PD_SEL_3		0xfffe10c0
+#define PU_PD_SEL_4		0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE	0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE			(0xfffec900)
+#define MPUI_CTRL			(MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE			0xfffbd000
+#define OMAP_LPG2_BASE			0xfffbd800
+#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE			0xfffb5800
+#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include "omap7xx.h"
+#include "omap1510.h"
+#include "omap16xx.h"
+
+#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h
new file mode 100644
index 000000000..ce4f8005b
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/io.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-omap1/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h
new file mode 100644
index 000000000..729992d7d
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/irqs.h
@@ -0,0 +1,268 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irqs.h
+ *
+ *  Copyright (C) Greg Lonnon 2001
+ *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ *	 are different.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA		1
+#define INT_FIQ			3
+#define INT_RTDX		6
+#define INT_DSP_MMU_ABORT	7
+#define INT_HOST		8
+#define INT_ABORT		9
+#define INT_BRIDGE_PRIV		13
+#define INT_GPIO_BANK1		14
+#define INT_UART3		15
+#define INT_TIMER3		16
+#define INT_DMA_CH0_6		19
+#define INT_DMA_CH1_7		20
+#define INT_DMA_CH2_8		21
+#define INT_DMA_CH3		22
+#define INT_DMA_CH4		23
+#define INT_DMA_CH5		24
+#define INT_TIMER1		26
+#define INT_WD_TIMER		27
+#define INT_BRIDGE_PUB		28
+#define INT_TIMER2		30
+#define INT_LCD_CTRL		31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ	0
+#define INT_1510_RES2		2
+#define INT_1510_SPI_TX		4
+#define INT_1510_SPI_RX		5
+#define INT_1510_DSP_MAILBOX1	10
+#define INT_1510_DSP_MAILBOX2	11
+#define INT_1510_RES12		12
+#define INT_1510_LB_MMU		17
+#define INT_1510_RES18		18
+#define INT_1510_LOCAL_BUS	29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ	INT_1510_IH2_IRQ
+#define INT_1610_IH2_FIQ	2
+#define INT_1610_McBSP2_TX	4
+#define INT_1610_McBSP2_RX	5
+#define INT_1610_DSP_MAILBOX1	10
+#define INT_1610_DSP_MAILBOX2	11
+#define INT_1610_LCD_LINE	12
+#define INT_1610_GPTIMER1	17
+#define INT_1610_GPTIMER2	18
+#define INT_1610_SSR_FIFO_0	29
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
+ */
+#define INT_7XX_IH2_FIQ		0
+#define INT_7XX_IH2_IRQ		1
+#define INT_7XX_USB_NON_ISO	2
+#define INT_7XX_USB_ISO		3
+#define INT_7XX_ICR		4
+#define INT_7XX_EAC		5
+#define INT_7XX_GPIO_BANK1	6
+#define INT_7XX_GPIO_BANK2	7
+#define INT_7XX_GPIO_BANK3	8
+#define INT_7XX_McBSP2TX	10
+#define INT_7XX_McBSP2RX	11
+#define INT_7XX_McBSP2RX_OVF	12
+#define INT_7XX_LCD_LINE	14
+#define INT_7XX_GSM_PROTECT	15
+#define INT_7XX_TIMER3		16
+#define INT_7XX_GPIO_BANK5	17
+#define INT_7XX_GPIO_BANK6	18
+#define INT_7XX_SPGIO_WR	29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE		32
+
+#define INT_KEYBOARD		(1 + IH2_BASE)
+#define INT_uWireTX		(2 + IH2_BASE)
+#define INT_uWireRX		(3 + IH2_BASE)
+#define INT_I2C			(4 + IH2_BASE)
+#define INT_MPUIO		(5 + IH2_BASE)
+#define INT_USB_HHC_1		(6 + IH2_BASE)
+#define INT_McBSP3TX		(10 + IH2_BASE)
+#define INT_McBSP3RX		(11 + IH2_BASE)
+#define INT_McBSP1TX		(12 + IH2_BASE)
+#define INT_McBSP1RX		(13 + IH2_BASE)
+#define INT_UART1		(14 + IH2_BASE)
+#define INT_UART2		(15 + IH2_BASE)
+#define INT_BT_MCSI1TX		(16 + IH2_BASE)
+#define INT_BT_MCSI1RX		(17 + IH2_BASE)
+#define INT_SOSSI_MATCH		(19 + IH2_BASE)
+#define INT_USB_W2FC		(20 + IH2_BASE)
+#define INT_1WIRE		(21 + IH2_BASE)
+#define INT_OS_TIMER		(22 + IH2_BASE)
+#define INT_MMC			(23 + IH2_BASE)
+#define INT_GAUGE_32K		(24 + IH2_BASE)
+#define INT_RTC_TIMER		(25 + IH2_BASE)
+#define INT_RTC_ALARM		(26 + IH2_BASE)
+#define INT_MEM_STICK		(27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU	(28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC		(0 + IH2_BASE)
+#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
+#define INT_1610_USB_OTG	(8 + IH2_BASE)
+#define INT_1610_SoSSI		(9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
+#define INT_1610_DSP_MMU	(28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
+#define INT_1610_STI		(32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
+#define INT_1610_GPTIMER3	(34 + IH2_BASE)
+#define INT_1610_GPTIMER4	(35 + IH2_BASE)
+#define INT_1610_GPTIMER5	(36 + IH2_BASE)
+#define INT_1610_GPTIMER6	(37 + IH2_BASE)
+#define INT_1610_GPTIMER7	(38 + IH2_BASE)
+#define INT_1610_GPTIMER8	(39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
+#define INT_1610_MMC2		(42 + IH2_BASE)
+#define INT_1610_CF		(43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
+#define INT_1610_SPI		(49 + IH2_BASE)
+#define INT_1610_DMA_CH6	(53 + IH2_BASE)
+#define INT_1610_DMA_CH7	(54 + IH2_BASE)
+#define INT_1610_DMA_CH8	(55 + IH2_BASE)
+#define INT_1610_DMA_CH9	(56 + IH2_BASE)
+#define INT_1610_DMA_CH10	(57 + IH2_BASE)
+#define INT_1610_DMA_CH11	(58 + IH2_BASE)
+#define INT_1610_DMA_CH12	(59 + IH2_BASE)
+#define INT_1610_DMA_CH13	(60 + IH2_BASE)
+#define INT_1610_DMA_CH14	(61 + IH2_BASE)
+#define INT_1610_DMA_CH15	(62 + IH2_BASE)
+#define INT_1610_NAND		(63 + IH2_BASE)
+#define INT_1610_SHA1MD5	(91 + IH2_BASE)
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
+ */
+#define INT_7XX_HW_ERRORS	(0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_7XX_CFCD		(2 + IH2_BASE)
+#define INT_7XX_CFIREQ		(3 + IH2_BASE)
+#define INT_7XX_I2C		(4 + IH2_BASE)
+#define INT_7XX_PCC		(5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1	(7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI	(8 + IH2_BASE)
+#define INT_7XX_VLYNQ		(9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_7XX_McBSP1TX	(11 + IH2_BASE)
+#define INT_7XX_McBSP1RX	(12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_7XX_MCSI		(16 + IH2_BASE)
+#define INT_7XX_uWireTX		(17 + IH2_BASE)
+#define INT_7XX_uWireRX		(18 + IH2_BASE)
+#define INT_7XX_SMC_CD		(19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ	(20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_7XX_TIMER32K	(22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO	(23 + IH2_BASE)
+#define INT_7XX_UPLD		(24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1	(27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2	(28 + IH2_BASE)
+#define INT_7XX_USB_GENI	(29 + IH2_BASE)
+#define INT_7XX_USB_OTG		(30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF	(31 + IH2_BASE)
+#define INT_7XX_RNG		(32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5	(36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2	(37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE	(38 + IH2_BASE)
+#define INT_7XX_MPUIO		(39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_7XX_DMA_CH6		(53 + IH2_BASE)
+#define INT_7XX_DMA_CH7		(54 + IH2_BASE)
+#define INT_7XX_DMA_CH8		(55 + IH2_BASE)
+#define INT_7XX_DMA_CH9		(56 + IH2_BASE)
+#define INT_7XX_DMA_CH10	(57 + IH2_BASE)
+#define INT_7XX_DMA_CH11	(58 + IH2_BASE)
+#define INT_7XX_DMA_CH12	(59 + IH2_BASE)
+#define INT_7XX_DMA_CH13	(60 + IH2_BASE)
+#define INT_7XX_DMA_CH14	(61 + IH2_BASE)
+#define INT_7XX_DMA_CH15	(62 + IH2_BASE)
+#define INT_7XX_NAND		(63 + IH2_BASE)
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES	192
+#define IH_GPIO_BASE		(128 + IH2_BASE)
+#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
+#ifdef	CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS	24
+#else
+#define OMAP_FPGA_NR_IRQS	0
+#endif
+#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+#define NR_IRQS			OMAP_FPGA_IRQ_END
+
+#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_FIQ
+#define FIQ_START		1024
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/lcd_dma.h b/arch/arm/mach-omap1/include/mach/lcd_dma.h
new file mode 100644
index 000000000..d7a457bbc
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/lcd_dma.h
@@ -0,0 +1,78 @@
+/*
+ *  arch/arm/mach-omap1/include/mach/lcd_dma.h
+ *
+ * Extracted from arch/arm/plat-omap/include/plat/dma.h
+ *  Copyright (C) 2003 Nokia Corporation
+ *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __MACH_OMAP1_LCD_DMA_H__
+#define __MACH_OMAP1_LCD_DMA_H__
+
+/* Hardware registers for LCD DMA */
+#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
+#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
+#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
+#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
+#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
+#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
+
+#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
+#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
+#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
+#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
+#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
+#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
+#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
+#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
+#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
+#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
+#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
+#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
+#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
+#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
+#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
+
+/* LCD DMA block numbers */
+enum {
+	OMAP_LCD_DMA_B1_TOP,
+	OMAP_LCD_DMA_B1_BOTTOM,
+	OMAP_LCD_DMA_B2_TOP,
+	OMAP_LCD_DMA_B2_BOTTOM
+};
+
+/* LCD DMA functions */
+extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+				void *data);
+extern void omap_free_lcd_dma(void);
+extern void omap_setup_lcd_dma(void);
+extern void omap_enable_lcd_dma(void);
+extern void omap_stop_lcd_dma(void);
+extern void omap_set_lcd_dma_ext_controller(int external);
+extern void omap_set_lcd_dma_single_transfer(int single);
+extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+				int data_type);
+extern void omap_set_lcd_dma_b1_rotation(int rotate);
+extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
+extern void omap_set_lcd_dma_b1_mirror(int mirror);
+extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+
+extern int omap_lcd_dma_running(void);
+
+#endif /* __MACH_OMAP1_LCD_DMA_H__ */
diff --git a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h
new file mode 100644
index 000000000..89bd703ad
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/lcdc.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-omap1/include/mach/lcdc.h
+ *
+ * Extracted from drivers/video/omap/lcdc.c
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#ifndef __MACH_LCDC_H__
+#define __MACH_LCDC_H__
+
+#define OMAP_LCDC_BASE			0xfffec000
+#define OMAP_LCDC_SIZE			256
+#define OMAP_LCDC_IRQ			INT_LCD_CTRL
+
+#define OMAP_LCDC_CONTROL		(OMAP_LCDC_BASE + 0x00)
+#define OMAP_LCDC_TIMING0		(OMAP_LCDC_BASE + 0x04)
+#define OMAP_LCDC_TIMING1		(OMAP_LCDC_BASE + 0x08)
+#define OMAP_LCDC_TIMING2		(OMAP_LCDC_BASE + 0x0c)
+#define OMAP_LCDC_STATUS		(OMAP_LCDC_BASE + 0x10)
+#define OMAP_LCDC_SUBPANEL		(OMAP_LCDC_BASE + 0x14)
+#define OMAP_LCDC_LINE_INT		(OMAP_LCDC_BASE + 0x18)
+#define OMAP_LCDC_DISPLAY_STATUS	(OMAP_LCDC_BASE + 0x1c)
+
+#define OMAP_LCDC_STAT_DONE		(1 << 0)
+#define OMAP_LCDC_STAT_VSYNC		(1 << 1)
+#define OMAP_LCDC_STAT_SYNC_LOST	(1 << 2)
+#define OMAP_LCDC_STAT_ABC		(1 << 3)
+#define OMAP_LCDC_STAT_LINE_INT		(1 << 4)
+#define OMAP_LCDC_STAT_FUF		(1 << 5)
+#define OMAP_LCDC_STAT_LOADED_PALETTE	(1 << 6)
+
+#define OMAP_LCDC_CTRL_LCD_EN		(1 << 0)
+#define OMAP_LCDC_CTRL_LCD_TFT		(1 << 7)
+#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL	(1 << 10)
+
+#define OMAP_LCDC_IRQ_VSYNC		(1 << 2)
+#define OMAP_LCDC_IRQ_DONE		(1 << 3)
+#define OMAP_LCDC_IRQ_LOADED_PALETTE	(1 << 4)
+#define OMAP_LCDC_IRQ_LINE_NIRQ		(1 << 5)
+#define OMAP_LCDC_IRQ_LINE		(1 << 6)
+#define OMAP_LCDC_IRQ_MASK		(((1 << 5) - 1) << 2)
+
+#endif /* __MACH_LCDC_H__ */
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
new file mode 100644
index 000000000..058a4f7d4
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-omap1/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus. We do the address translation based on the
+ * device overriding the defaults used in the dma-mapping API.
+ * Note that the is_lbus_device() test is not very efficient on 1510
+ * because of the strncmp().
+ */
+#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
+#include <mach/soc.h>
+
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET	UL(0x30000000)
+
+#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
+#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
+#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
+
+#define __arch_pfn_to_dma(dev, pfn)	\
+	({ dma_addr_t __dma = __pfn_to_phys(pfn); \
+	   if (is_lbus_device(dev)) \
+		__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
+	   __dma; })
+
+#define __arch_dma_to_pfn(dev, addr)	\
+	({ dma_addr_t __dma = addr;				\
+	   if (is_lbus_device(dev))				\
+		__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;	\
+	   __phys_to_pfn(__dma);				\
+	})
+
+#define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
+						lbus_to_virt(addr) : \
+						__phys_to_virt(addr)); })
+
+#define __arch_virt_to_dma(dev, addr)	({ unsigned long __addr = (unsigned long)(addr); \
+					   (dma_addr_t) (is_lbus_device(dev) ? \
+						virt_to_lbus(__addr) : \
+						__virt_to_phys(__addr)); })
+
+#endif	/* CONFIG_ARCH_OMAP15XX */
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/mtd-xip.h b/arch/arm/mach-omap1/include/mach/mtd-xip.h
new file mode 100644
index 000000000..f82a8dcaa
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/mtd-xip.h
@@ -0,0 +1,61 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions.
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Author: Vladimir Barinov <vbarinov@embeddedalley.com>
+ *
+ * (c) 2005 MontaVista Software, Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2.  This program is
+ * licensed "as is" without any warranty of any kind, whether express or
+ * implied.
+ */
+
+#ifndef __ARCH_OMAP_MTD_XIP_H__
+#define __ARCH_OMAP_MTD_XIP_H__
+
+#include <mach/hardware.h>
+#define OMAP_MPU_TIMER_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER_OFFSET	0x100
+
+typedef struct {
+	u32 cntl;			/* CNTL_TIMER, R/W */
+	u32 load_tim;			/* LOAD_TIM,   W */
+	u32 read_tim;			/* READ_TIM,   R */
+} xip_omap_mpu_timer_regs_t;
+
+#define xip_omap_mpu_timer_base(n)					\
+((volatile xip_omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+	(n)*OMAP_MPU_TIMER_OFFSET))
+
+static inline unsigned long xip_omap_mpu_timer_read(int nr)
+{
+	volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
+	return timer->read_tim;
+}
+
+#define xip_irqpending()	\
+	(omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
+#define xip_currtime()		(~xip_omap_mpu_timer_read(0))
+
+/*
+ * It's permitted to do approxmation for xip_elapsed_since macro
+ * (see linux/mtd/xip.h)
+ */
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
+#else
+#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
+#endif
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle()  asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
+
+#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/arch/arm/mach-omap1/include/mach/mux.h b/arch/arm/mach-omap1/include/mach/mux.h
new file mode 100644
index 000000000..323948959
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/mux.h
@@ -0,0 +1,454 @@
+/*
+ * arch/arm/plat-omap/include/mach/mux.h
+ *
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ *	 For example, W8_1610_MMC2_DAT0, where:
+ *	 - W8	     = ball
+ *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
+ *	 - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
+
+#ifdef	CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+					.mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
+					.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
+					.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)	.pull_name = "OMAP7XX_IO_CONF_"#reg, \
+					.pull_reg = OMAP7XX_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)	.pull_reg = OMAP7XX_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
+		pull_reg, pull_bit, pull_status,	\
+		pu_pd_reg, pu_pd_status, debug_status)	\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG(mux_reg, mode_offset, mode)		\
+	PULL_REG(pull_reg, pull_bit, pull_status)	\
+	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
+},
+
+
+/*
+ * OMAP730/850 has a slightly different config for the pin mux.
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
+ *   not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ *   as mux config
+ */
+#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,	\
+		   pull_bit, pull_status, debug_status)\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG_7XX(mux_reg, mode_offset, mode)		\
+	PULL_REG_7XX(mux_reg, pull_bit, pull_status)	\
+	PU_PD_REG(NA, 0)		\
+},
+
+struct pin_config {
+	char 			*name;
+	const unsigned int 	mux_reg;
+	unsigned char		debug;
+
+	const unsigned char mask_offset;
+	const unsigned char mask;
+
+	const char *pull_name;
+	const unsigned int pull_reg;
+	const unsigned char pull_val;
+	const unsigned char pull_bit;
+
+	const char *pu_pd_name;
+	const unsigned int pu_pd_reg;
+	const unsigned char pu_pd_val;
+
+#if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+	const char *mux_reg_name;
+#endif
+
+};
+
+enum omap7xx_index {
+	/* OMAP 730 keyboard */
+	E2_7XX_KBR0,
+	J7_7XX_KBR1,
+	E1_7XX_KBR2,
+	F3_7XX_KBR3,
+	D2_7XX_KBR4,
+	C2_7XX_KBC0,
+	D3_7XX_KBC1,
+	E4_7XX_KBC2,
+	F4_7XX_KBC3,
+	E3_7XX_KBC4,
+
+	/* USB */
+	AA17_7XX_USB_DM,
+	W16_7XX_USB_PU_EN,
+	W17_7XX_USB_VBUSI,
+	W18_7XX_USB_DMCK_OUT,
+	W19_7XX_USB_DCRST,
+
+	/* MMC */
+	MMC_7XX_CMD,
+	MMC_7XX_CLK,
+	MMC_7XX_DAT0,
+
+	/* I2C */
+	I2C_7XX_SCL,
+	I2C_7XX_SDA,
+
+	/* SPI */
+	SPI_7XX_1,
+	SPI_7XX_2,
+	SPI_7XX_3,
+	SPI_7XX_4,
+	SPI_7XX_5,
+	SPI_7XX_6,
+
+	/* UART */
+	UART_7XX_1,
+	UART_7XX_2,
+};
+
+enum omap1xxx_index {
+	/* UART1 (BT_UART_GATING)*/
+	UART1_TX = 0,
+	UART1_RTS,
+
+	/* UART2 (COM_UART_GATING)*/
+	UART2_TX,
+	UART2_RX,
+	UART2_CTS,
+	UART2_RTS,
+
+	/* UART3 (GIGA_UART_GATING) */
+	UART3_TX,
+	UART3_RX,
+	UART3_CTS,
+	UART3_RTS,
+	UART3_CLKREQ,
+	UART3_BCLK,	/* 12MHz clock out */
+	Y15_1610_UART3_RTS,
+
+	/* PWT & PWL */
+	PWT,
+	PWL,
+
+	/* USB master generic */
+	R18_USB_VBUS,
+	R18_1510_USB_GPIO0,
+	W4_USB_PUEN,
+	W4_USB_CLKO,
+	W4_USB_HIGHZ,
+	W4_GPIO58,
+
+	/* USB1 master */
+	USB1_SUSP,
+	USB1_SEO,
+	W13_1610_USB1_SE0,
+	USB1_TXEN,
+	USB1_TXD,
+	USB1_VP,
+	USB1_VM,
+	USB1_RCV,
+	USB1_SPEED,
+	R13_1610_USB1_SPEED,
+	R13_1710_USB1_SE0,
+
+	/* USB2 master */
+	USB2_SUSP,
+	USB2_VP,
+	USB2_TXEN,
+	USB2_VM,
+	USB2_RCV,
+	USB2_SEO,
+	USB2_TXD,
+
+	/* OMAP-1510 GPIO */
+	R18_1510_GPIO0,
+	R19_1510_GPIO1,
+	M14_1510_GPIO2,
+
+	/* OMAP1610 GPIO */
+	P18_1610_GPIO3,
+	Y15_1610_GPIO17,
+
+	/* OMAP-1710 GPIO */
+	R18_1710_GPIO0,
+	V2_1710_GPIO10,
+	N21_1710_GPIO14,
+	W15_1710_GPIO40,
+
+	/* MPUIO */
+	MPUIO2,
+	N15_1610_MPUIO2,
+	MPUIO4,
+	MPUIO5,
+	T20_1610_MPUIO5,
+	W11_1610_MPUIO6,
+	V10_1610_MPUIO7,
+	W11_1610_MPUIO9,
+	V10_1610_MPUIO10,
+	W10_1610_MPUIO11,
+	E20_1610_MPUIO13,
+	U20_1610_MPUIO14,
+	E19_1610_MPUIO15,
+
+	/* MCBSP2 */
+	MCBSP2_CLKR,
+	MCBSP2_CLKX,
+	MCBSP2_DR,
+	MCBSP2_DX,
+	MCBSP2_FSR,
+	MCBSP2_FSX,
+
+	/* MCBSP3 */
+	MCBSP3_CLKX,
+
+	/* Misc ballouts */
+	BALLOUT_V8_ARMIO3,
+	N20_HDQ,
+
+	/* OMAP-1610 MMC2 */
+	W8_1610_MMC2_DAT0,
+	V8_1610_MMC2_DAT1,
+	W15_1610_MMC2_DAT2,
+	R10_1610_MMC2_DAT3,
+	Y10_1610_MMC2_CLK,
+	Y8_1610_MMC2_CMD,
+	V9_1610_MMC2_CMDDIR,
+	V5_1610_MMC2_DATDIR0,
+	W19_1610_MMC2_DATDIR1,
+	R18_1610_MMC2_CLKIN,
+
+	/* OMAP-1610 External Trace Interface */
+	M19_1610_ETM_PSTAT0,
+	L15_1610_ETM_PSTAT1,
+	L18_1610_ETM_PSTAT2,
+	L19_1610_ETM_D0,
+	J19_1610_ETM_D6,
+	J18_1610_ETM_D7,
+
+	/* OMAP16XX GPIO */
+	P20_1610_GPIO4,
+	V9_1610_GPIO7,
+	W8_1610_GPIO9,
+	N20_1610_GPIO11,
+	N19_1610_GPIO13,
+	P10_1610_GPIO22,
+	V5_1610_GPIO24,
+	AA20_1610_GPIO_41,
+	W19_1610_GPIO48,
+	M7_1610_GPIO62,
+	V14_16XX_GPIO37,
+	R9_16XX_GPIO18,
+	L14_16XX_GPIO49,
+
+	/* OMAP-1610 uWire */
+	V19_1610_UWIRE_SCLK,
+	U18_1610_UWIRE_SDI,
+	W21_1610_UWIRE_SDO,
+	N14_1610_UWIRE_CS0,
+	P15_1610_UWIRE_CS3,
+	N15_1610_UWIRE_CS1,
+
+	/* OMAP-1610 SPI */
+	U19_1610_SPIF_SCK,
+	U18_1610_SPIF_DIN,
+	P20_1610_SPIF_DIN,
+	W21_1610_SPIF_DOUT,
+	R18_1610_SPIF_DOUT,
+	N14_1610_SPIF_CS0,
+	N15_1610_SPIF_CS1,
+	T19_1610_SPIF_CS2,
+	P15_1610_SPIF_CS3,
+
+	/* OMAP-1610 Flash */
+	L3_1610_FLASH_CS2B_OE,
+	M8_1610_FLASH_CS2B_WE,
+
+	/* First MMC */
+	MMC_CMD,
+	MMC_DAT1,
+	MMC_DAT2,
+	MMC_DAT0,
+	MMC_CLK,
+	MMC_DAT3,
+
+	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
+	M15_1710_MMC_CLKI,
+	P19_1710_MMC_CMDDIR,
+	P20_1710_MMC_DATDIR0,
+
+	/* OMAP-1610 USB0 alternate pin configuration */
+	W9_USB0_TXEN,
+	AA9_USB0_VP,
+	Y5_USB0_RCV,
+	R9_USB0_VM,
+	V6_USB0_TXD,
+	W5_USB0_SE0,
+	V9_USB0_SPEED,
+	V9_USB0_SUSP,
+
+	/* USB2 */
+	W9_USB2_TXEN,
+	AA9_USB2_VP,
+	Y5_USB2_RCV,
+	R9_USB2_VM,
+	V6_USB2_TXD,
+	W5_USB2_SE0,
+
+	/* 16XX UART */
+	R13_1610_UART1_TX,
+	V14_16XX_UART1_RX,
+	R14_1610_UART1_CTS,
+	AA15_1610_UART1_RTS,
+	R9_16XX_UART2_RX,
+	L14_16XX_UART3_RX,
+
+	/* I2C OMAP-1610 */
+	I2C_SCL,
+	I2C_SDA,
+
+	/* Keypad */
+	F18_1610_KBC0,
+	D20_1610_KBC1,
+	D19_1610_KBC2,
+	E18_1610_KBC3,
+	C21_1610_KBC4,
+	G18_1610_KBR0,
+	F19_1610_KBR1,
+	H14_1610_KBR2,
+	E20_1610_KBR3,
+	E19_1610_KBR4,
+	N19_1610_KBR5,
+
+	/* Power management */
+	T20_1610_LOW_PWR,
+
+	/* MCLK Settings */
+	V5_1710_MCLK_ON,
+	V5_1710_MCLK_OFF,
+	R10_1610_MCLK_ON,
+	R10_1610_MCLK_OFF,
+
+	/* CompactFlash controller */
+	P11_1610_CF_CD2,
+	R11_1610_CF_IOIS16,
+	V10_1610_CF_IREQ,
+	W10_1610_CF_RESET,
+	W11_1610_CF_CD1,
+
+	/* parallel camera */
+	J15_1610_CAM_LCLK,
+	J18_1610_CAM_D7,
+	J19_1610_CAM_D6,
+	J14_1610_CAM_D5,
+	K18_1610_CAM_D4,
+	K19_1610_CAM_D3,
+	K15_1610_CAM_D2,
+	K14_1610_CAM_D1,
+	L19_1610_CAM_D0,
+	L18_1610_CAM_VS,
+	L15_1610_CAM_HS,
+	M19_1610_CAM_RSTZ,
+	Y15_1610_CAM_OUTCLK,
+
+	/* serial camera */
+	H19_1610_CAM_EXCLK,
+	Y12_1610_CCP_CLKP,
+	W13_1610_CCP_CLKM,
+	W14_1610_CCP_DATAP,
+	Y14_1610_CCP_DATAM,
+
+};
+
+struct omap_mux_cfg {
+	struct pin_config	*pins;
+	unsigned long		size;
+	int			(*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef	CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+extern int omap_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+extern int omap2_mux_init(void);
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/omap1510.h b/arch/arm/mach-omap1/include/mach/omap1510.h
new file mode 100644
index 000000000..3d235244b
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/omap1510.h
@@ -0,0 +1,162 @@
+/*
+ * Hardware definitions for TI OMAP1510 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_H
+#define __ASM_ARCH_OMAP15XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP1510_DSP_BASE	0xE0000000
+#define OMAP1510_DSP_SIZE	0x28000
+#define OMAP1510_DSP_START	0xE0000000
+
+#define OMAP1510_DSPREG_BASE	0xE1000000
+#define OMAP1510_DSPREG_SIZE	SZ_128K
+#define OMAP1510_DSPREG_START	0xE1000000
+
+#define OMAP1510_DSP_MMU_BASE	(0xfffed200)
+
+/*
+ * ---------------------------------------------------------------------------
+ *  OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE		0xE8000000		/* VA */
+#define OMAP1510_FPGA_SIZE		SZ_4K
+#define OMAP1510_FPGA_START		0x08000000		/* PA */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW			IOMEM(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH			IOMEM(OMAP1510_FPGA_BASE + 0x1)
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT			IOMEM(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI			IOMEM(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER			IOMEM(OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO			IOMEM(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI			IOMEM(OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET		IOMEM(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST			IOMEM(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO			IOMEM(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP			IOMEM(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO			IOMEM(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1			IOMEM(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2			IOMEM(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS		IOMEM(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV			IOMEM(OMAP1510_FPGA_BASE + 0x18)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20c)
+#define OMAP1510P1_PPT_DATA			IOMEM(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS			IOMEM(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL			IOMEM(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN		IOMEM(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO			IOMEM(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO		IOMEM(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI		IOMEM(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO		IOMEM(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI		IOMEM(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO		IOMEM(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI		IOMEM(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_EXP_CONTROL		IOMEM(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2			IOMEM(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2			IOMEM(OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE		0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0		(1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN		(1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN		(1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0		(1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1		(1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK		(1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK		(1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0		(1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK	(1<<0)	/* output */
+#define OMAP1510_FPGA_HID_MOSI	(1<<1)	/* output */
+#define OMAP1510_FPGA_HID_nSS	(1<<2)	/* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS	(1<<3)	/* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO	(1<<4)	/* input */
+#define OMAP1510_FPGA_HID_ATN	(1<<5)	/* input  0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd	(1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7)	/* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA		(IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN		(OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK		(OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2		(OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3		(OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4		(OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5		(OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6		(OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7		(OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8		(OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9		(OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10		(OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11		(OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12		(OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER		(OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1		(OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2		(OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS		(OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17		(OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM		(OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A		(OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B		(OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD		(OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22		(OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
+
+#endif /*  __ASM_ARCH_OMAP15XX_H */
+
diff --git a/arch/arm/mach-omap1/include/mach/omap16xx.h b/arch/arm/mach-omap1/include/mach/omap16xx.h
new file mode 100644
index 000000000..cd1c72486
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/omap16xx.h
@@ -0,0 +1,201 @@
+/*
+ * Hardware definitions for TI OMAP1610/5912/1710 processors.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP16XX_H
+#define __ASM_ARCH_OMAP16XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP16XX_DSP_BASE	0xE0000000
+#define OMAP16XX_DSP_SIZE	0x28000
+#define OMAP16XX_DSP_START	0xE0000000
+
+#define OMAP16XX_DSPREG_BASE	0xE1000000
+#define OMAP16XX_DSPREG_SIZE	SZ_128K
+#define OMAP16XX_DSPREG_START	0xE1000000
+
+#define OMAP16XX_SEC_BASE	0xFFFE4000
+#define OMAP16XX_SEC_DES	(OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5	(OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG	(OMAP16XX_SEC_BASE + 0x1000)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_IH2_0_BASE		(0xfffe0000)
+#define OMAP_IH2_1_BASE		(0xfffe0100)
+#define OMAP_IH2_2_BASE		(0xfffe0200)
+#define OMAP_IH2_3_BASE		(0xfffe0300)
+
+#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
+#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
+#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
+#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
+#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
+#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
+#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
+
+#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
+#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
+#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
+#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
+#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
+#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
+#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
+
+#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
+#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
+#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
+#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
+#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
+#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
+#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
+
+#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
+#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
+#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
+#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
+#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
+#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
+#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_ARM_IDLECT3	(CLKGEN_REG_BASE + 0x24)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV6	(1 << 8)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV7	(1 << 9)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV8	(1 << 10)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV9	(1 << 11)
+#define OMAP16XX_SUBLVDS_CONF_VALID	(1 << 13)
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP1610_RESET_CONTROL  0xfffe1140
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_SWITCH_BASE		 (0xfffbc800)
+#define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
+
+/* UART3 Registers Mapping through MPU bus */
+#define UART3_RHR               (OMAP1_UART3_BASE + 0)
+#define UART3_THR               (OMAP1_UART3_BASE + 0)
+#define UART3_DLL               (OMAP1_UART3_BASE + 0)
+#define UART3_IER               (OMAP1_UART3_BASE + 4)
+#define UART3_DLH               (OMAP1_UART3_BASE + 4)
+#define UART3_IIR               (OMAP1_UART3_BASE + 8)
+#define UART3_FCR               (OMAP1_UART3_BASE + 8)
+#define UART3_EFR               (OMAP1_UART3_BASE + 8)
+#define UART3_LCR               (OMAP1_UART3_BASE + 0x0C)
+#define UART3_MCR               (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1        (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2        (OMAP1_UART3_BASE + 0x14)
+#define UART3_LSR               (OMAP1_UART3_BASE + 0x14)
+#define UART3_TCR               (OMAP1_UART3_BASE + 0x18)
+#define UART3_MSR               (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF1             (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF2             (OMAP1_UART3_BASE + 0x1C)
+#define UART3_SPR               (OMAP1_UART3_BASE + 0x1C)
+#define UART3_TLR               (OMAP1_UART3_BASE + 0x1C)
+#define UART3_MDR1              (OMAP1_UART3_BASE + 0x20)
+#define UART3_MDR2              (OMAP1_UART3_BASE + 0x24)
+#define UART3_SFLSR             (OMAP1_UART3_BASE + 0x28)
+#define UART3_TXFLL             (OMAP1_UART3_BASE + 0x28)
+#define UART3_RESUME            (OMAP1_UART3_BASE + 0x2C)
+#define UART3_TXFLH             (OMAP1_UART3_BASE + 0x2C)
+#define UART3_SFREGL            (OMAP1_UART3_BASE + 0x30)
+#define UART3_RXFLL             (OMAP1_UART3_BASE + 0x30)
+#define UART3_SFREGH            (OMAP1_UART3_BASE + 0x34)
+#define UART3_RXFLH             (OMAP1_UART3_BASE + 0x34)
+#define UART3_BLR               (OMAP1_UART3_BASE + 0x38)
+#define UART3_ACREG             (OMAP1_UART3_BASE + 0x3C)
+#define UART3_DIV16             (OMAP1_UART3_BASE + 0x3C)
+#define UART3_SCR               (OMAP1_UART3_BASE + 0x40)
+#define UART3_SSR               (OMAP1_UART3_BASE + 0x44)
+#define UART3_EBLR              (OMAP1_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL       (OMAP1_UART3_BASE + 0x4C)
+#define UART3_MVR               (OMAP1_UART3_BASE + 0x50)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* 32-bit Watchdog timer in OMAP 16XX */
+#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
+#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
+#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
+#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
+#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
+#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
+#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
+#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
+#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
+#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
+
+#define WCLR_PRE_SHIFT         5
+#define WCLR_PTV_SHIFT         2
+
+#define WWPS_W_PEND_WSPR       (1 << 4)
+#define WWPS_W_PEND_WTGR       (1 << 3)
+#define WWPS_W_PEND_WLDR       (1 << 2)
+#define WWPS_W_PEND_WCRR       (1 << 1)
+#define WWPS_W_PEND_WCLR       (1 << 0)
+
+#define WSPR_ENABLE_0          (0x0000bbbb)
+#define WSPR_ENABLE_1          (0x00004444)
+#define WSPR_DISABLE_0         (0x0000aaaa)
+#define WSPR_DISABLE_1         (0x00005555)
+
+#define OMAP16XX_DSP_MMU_BASE	(0xfffed200)
+#define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
+
+#endif /*  __ASM_ARCH_OMAP16XX_H */
+
diff --git a/arch/arm/mach-omap1/include/mach/omap7xx.h b/arch/arm/mach-omap1/include/mach/omap7xx.h
new file mode 100644
index 000000000..63da994bc
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/omap7xx.h
@@ -0,0 +1,106 @@
+/*
+ * Hardware definitions for TI OMAP7XX processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
+ * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP7XX_H
+#define __ASM_ARCH_OMAP7XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP7XX_DSP_BASE	0xE0000000
+#define OMAP7XX_DSP_SIZE	0x50000
+#define OMAP7XX_DSP_START	0xE0000000
+
+#define OMAP7XX_DSPREG_BASE	0xE1000000
+#define OMAP7XX_DSPREG_SIZE	SZ_128K
+#define OMAP7XX_DSPREG_START	0xE1000000
+
+#define OMAP7XX_SPI1_BASE	0xfffc0800
+#define OMAP7XX_SPI2_BASE	0xfffc1000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_CONFIG_BASE	0xfffe1000
+#define OMAP7XX_IO_CONF_0	0xfffe1070
+#define OMAP7XX_IO_CONF_1	0xfffe1074
+#define OMAP7XX_IO_CONF_2	0xfffe1078
+#define OMAP7XX_IO_CONF_3	0xfffe107c
+#define OMAP7XX_IO_CONF_4	0xfffe1080
+#define OMAP7XX_IO_CONF_5	0xfffe1084
+#define OMAP7XX_IO_CONF_6	0xfffe1088
+#define OMAP7XX_IO_CONF_7	0xfffe108c
+#define OMAP7XX_IO_CONF_8	0xfffe1090
+#define OMAP7XX_IO_CONF_9	0xfffe1094
+#define OMAP7XX_IO_CONF_10	0xfffe1098
+#define OMAP7XX_IO_CONF_11	0xfffe109c
+#define OMAP7XX_IO_CONF_12	0xfffe10a0
+#define OMAP7XX_IO_CONF_13	0xfffe10a4
+
+#define OMAP7XX_MODE_1		0xfffe1010
+#define OMAP7XX_MODE_2		0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP7XX_MODE2_OFFSET	0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_FLASH_CFG_0	0xfffecc10
+#define OMAP7XX_FLASH_ACFG_0	0xfffecc50
+#define OMAP7XX_FLASH_CFG_1	0xfffecc14
+#define OMAP7XX_FLASH_ACFG_1	0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_ICR_BASE	0xfffbb800
+#define OMAP7XX_DSP_M_CTL	0xfffbb804
+#define OMAP7XX_DSP_MMU_BASE	0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_PCC_UPLD_CTRL_BASE	(0xfffe0900)
+#define OMAP7XX_PCC_UPLD_CTRL		(OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP7XX_H */
+
diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/include/mach/serial.h
new file mode 100644
index 000000000..2ce6a2db4
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/serial.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <linux/init.h>
+
+/*
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ *    uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ *    and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO_OFS	0x3ffc
+
+/* OMAP1 serial ports */
+#define OMAP1_UART1_BASE	0xfffb0000
+#define OMAP1_UART2_BASE	0xfffb0800
+#define OMAP1_UART3_BASE	0xfffb9800
+
+#define OMAP_PORT_SHIFT		2
+#define OMAP7XX_PORT_SHIFT	0
+
+#define OMAP1510_BASE_BAUD	(12000000/16)
+#define OMAP16XX_BASE_BAUD	(48000000/16)
+
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP1UART1		11
+#define OMAP1UART2		12
+#define OMAP1UART3		13
+
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+#endif
+
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h
new file mode 100644
index 000000000..612bd1cc2
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/soc.h
@@ -0,0 +1,230 @@
+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap850
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap16xx
+# endif
+#endif
+
+/*
+ * omap_rev bits:
+ * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
+ * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
+ */
+unsigned int omap_rev(void);
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx():	True for OMAP730, OMAP850
+ * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
+ */
+#define GET_OMAP_CLASS	(omap_rev() & 0xff)
+
+#define IS_OMAP_CLASS(class, id)			\
+static inline int is_omap ##class (void)		\
+{							\
+	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
+}
+
+#define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id)			\
+static inline int is_omap ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+
+#define cpu_is_omap7xx()		0
+#define cpu_is_omap15xx()		0
+#define cpu_is_omap16xx()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap310():	True for OMAP310
+ * cpu_is_omap1510():	True for OMAP1510
+ * cpu_is_omap1610():	True for OMAP1610
+ * cpu_is_omap1611():	True for OMAP1611
+ * cpu_is_omap5912():	True for OMAP5912
+ * cpu_is_omap1621():	True for OMAP1621
+ * cpu_is_omap1710():	True for OMAP1710
+ */
+#define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id)				\
+static inline int is_omap ##type (void)			\
+{							\
+	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
+}
+
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+
+#define cpu_is_omap310()		0
+#define cpu_is_omap1510()		0
+#define cpu_is_omap1610()		0
+#define cpu_is_omap5912()		0
+#define cpu_is_omap1611()		0
+#define cpu_is_omap1621()		0
+#define cpu_is_omap1710()		0
+
+/* These are needed to compile common code */
+#ifdef CONFIG_ARCH_OMAP1
+#define cpu_is_omap242x()		0
+#define cpu_is_omap2430()		0
+#define cpu_is_omap243x()		0
+#define cpu_is_omap24xx()		0
+#define cpu_is_omap34xx()		0
+#define cpu_is_omap44xx()		0
+#define soc_is_omap54xx()		0
+#define soc_is_dra7xx()			0
+#define soc_is_am33xx()			0
+#define cpu_class_is_omap1()		1
+#define cpu_class_is_omap2()		0
+#endif
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 310 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef  cpu_is_omap310
+# undef  cpu_is_omap1510
+# define cpu_is_omap310()		is_omap310()
+# define cpu_is_omap1510()		is_omap1510()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef  cpu_is_omap1610
+# undef  cpu_is_omap1611
+# undef  cpu_is_omap5912
+# undef  cpu_is_omap1621
+# undef  cpu_is_omap1710
+# define cpu_is_omap1610()		is_omap1610()
+# define cpu_is_omap1611()		is_omap1611()
+# define cpu_is_omap5912()		is_omap5912()
+# define cpu_is_omap1621()		is_omap1621()
+# define cpu_is_omap1710()		is_omap1710()
+#endif
+
+#endif	/* __ASSEMBLY__ */
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/tc.h b/arch/arm/mach-omap1/include/mach/tc.h
new file mode 100644
index 000000000..1b4b2da86
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/tc.h
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/plat-omap/include/mach/tc.h
+ *
+ * OMAP Traffic Controller
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_TC_H
+#define __ASM_ARCH_TC_H
+
+#define TCMIF_BASE		0xfffecc00
+#define OMAP_TC_OCPT1_PRIOR	(TCMIF_BASE + 0x00)
+#define OMAP_TC_EMIFS_PRIOR	(TCMIF_BASE + 0x04)
+#define OMAP_TC_EMIFF_PRIOR	(TCMIF_BASE + 0x08)
+#define EMIFS_CONFIG		(TCMIF_BASE + 0x0c)
+#define EMIFS_CS0_CONFIG	(TCMIF_BASE + 0x10)
+#define EMIFS_CS1_CONFIG	(TCMIF_BASE + 0x14)
+#define EMIFS_CS2_CONFIG	(TCMIF_BASE + 0x18)
+#define EMIFS_CS3_CONFIG	(TCMIF_BASE + 0x1c)
+#define EMIFF_SDRAM_CONFIG	(TCMIF_BASE + 0x20)
+#define EMIFF_MRS		(TCMIF_BASE + 0x24)
+#define TC_TIMEOUT1		(TCMIF_BASE + 0x28)
+#define TC_TIMEOUT2		(TCMIF_BASE + 0x2c)
+#define TC_TIMEOUT3		(TCMIF_BASE + 0x30)
+#define TC_ENDIANISM		(TCMIF_BASE + 0x34)
+#define EMIFF_SDRAM_CONFIG_2	(TCMIF_BASE + 0x3c)
+#define EMIF_CFG_DYNAMIC_WS	(TCMIF_BASE + 0x40)
+#define EMIFS_ACS0		(TCMIF_BASE + 0x50)
+#define EMIFS_ACS1		(TCMIF_BASE + 0x54)
+#define EMIFS_ACS2		(TCMIF_BASE + 0x58)
+#define EMIFS_ACS3		(TCMIF_BASE + 0x5c)
+#define OMAP_TC_OCPT2_PRIOR	(TCMIF_BASE + 0xd0)
+
+/* external EMIFS chipselect regions */
+#define	OMAP_CS0_PHYS		0x00000000
+#define	OMAP_CS0_SIZE		SZ_64M
+
+#define	OMAP_CS1_PHYS		0x04000000
+#define	OMAP_CS1_SIZE		SZ_64M
+
+#define	OMAP_CS1A_PHYS		OMAP_CS1_PHYS
+#define	OMAP_CS1A_SIZE		SZ_32M
+
+#define	OMAP_CS1B_PHYS		(OMAP_CS1A_PHYS + OMAP_CS1A_SIZE)
+#define	OMAP_CS1B_SIZE		SZ_32M
+
+#define	OMAP_CS2_PHYS		0x08000000
+#define	OMAP_CS2_SIZE		SZ_64M
+
+#define	OMAP_CS2A_PHYS		OMAP_CS2_PHYS
+#define	OMAP_CS2A_SIZE		SZ_32M
+
+#define	OMAP_CS2B_PHYS		(OMAP_CS2A_PHYS + OMAP_CS2A_SIZE)
+#define	OMAP_CS2B_SIZE		SZ_32M
+
+#define	OMAP_CS3_PHYS		0x0c000000
+#define	OMAP_CS3_SIZE		SZ_64M
+
+#ifndef	__ASSEMBLER__
+
+/* EMIF Slow Interface Configuration Register */
+#define OMAP_EMIFS_CONFIG_FR		(1 << 4)
+#define OMAP_EMIFS_CONFIG_PDE		(1 << 3)
+#define OMAP_EMIFS_CONFIG_PWD_EN	(1 << 2)
+#define OMAP_EMIFS_CONFIG_BM		(1 << 1)
+#define OMAP_EMIFS_CONFIG_WP		(1 << 0)
+
+#define EMIFS_CCS(n)		(EMIFS_CS0_CONFIG + (4 * (n)))
+#define EMIFS_ACS(n)		(EMIFS_ACS0 + (4 * (n)))
+
+#endif	/* __ASSEMBLER__ */
+
+#endif	/* __ASM_ARCH_TC_H */
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
new file mode 100644
index 000000000..4869633de
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/uncompress.h
@@ -0,0 +1,117 @@
+/*
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+
+#include "serial.h"
+
+#define MDR1_MODE_MASK			0x07
+
+volatile u8 *uart_base;
+int uart_shift;
+
+/*
+ * Store the DEBUG_LL uart number into memory.
+ * See also debug-macro.S, and serial.c for related code.
+ */
+static void set_omap_uart_info(unsigned char port)
+{
+	/*
+	 * Get address of some.bss variable and round it down
+	 * a la CONFIG_AUTO_ZRELADDR.
+	 */
+	u32 ram_start = (u32)&uart_shift & 0xf8000000;
+	u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+	*uart_info = port;
+}
+
+static void putc(int c)
+{
+	if (!uart_base)
+		return;
+
+	/* Check for UART 16x mode */
+	if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
+		return;
+
+	while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
+		barrier();
+	uart_base[UART_TX << uart_shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id)		\
+	if (machine_is_##mach()) {					\
+		uart_base = (volatile u8 *)(dbg_uart);			\
+		uart_shift = (dbg_shft);				\
+		port = (dbg_id);					\
+		set_omap_uart_info(port);				\
+		break;							\
+	}
+
+#define DEBUG_LL_OMAP7XX(p, mach)					\
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT,	\
+		OMAP1UART##p)
+
+#define DEBUG_LL_OMAP1(p, mach)						\
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP1UART##p)
+
+static inline void arch_decomp_setup(void)
+{
+	int port = 0;
+
+	/*
+	 * Initialize the port based on the machine ID from the bootloader.
+	 * Note that we're using macros here instead of switch statement
+	 * as machine_is functions are optimized out for the boards that
+	 * are not selected.
+	 */
+	do {
+		/* omap7xx/8xx based boards using UART1 with shift 0 */
+		DEBUG_LL_OMAP7XX(1, herald);
+		DEBUG_LL_OMAP7XX(1, omap_perseus2);
+
+		/* omap15xx/16xx based boards using UART1 */
+		DEBUG_LL_OMAP1(1, ams_delta);
+		DEBUG_LL_OMAP1(1, nokia770);
+		DEBUG_LL_OMAP1(1, omap_h2);
+		DEBUG_LL_OMAP1(1, omap_h3);
+		DEBUG_LL_OMAP1(1, omap_innovator);
+		DEBUG_LL_OMAP1(1, omap_osk);
+		DEBUG_LL_OMAP1(1, omap_palmte);
+		DEBUG_LL_OMAP1(1, omap_palmz71);
+
+		/* omap15xx/16xx based boards using UART2 */
+		DEBUG_LL_OMAP1(2, omap_palmtt);
+
+		/* omap15xx/16xx based boards using UART3 */
+		DEBUG_LL_OMAP1(3, sx1);
+	} while (0);
+}
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h
new file mode 100644
index 000000000..2c263051d
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/usb.h
@@ -0,0 +1,129 @@
+/*
+ * FIXME correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#if IS_ENABLED(CONFIG_USB_OMAP)
+#define	is_usb0_device(config)	1
+#else
+#define	is_usb0_device(config)	0
+#endif
+
+#include <linux/platform_data/usb-omap1.h>
+
+void omap_otg_init(struct omap_usb_config *config);
+
+#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#define OMAP1_OTG_BASE			0xfffb0400
+#define OMAP1_UDC_BASE			0xfffb4000
+#define OMAP1_OHCI_BASE			0xfffba000
+
+#define OMAP2_OHCI_BASE			0x4805e000
+#define OMAP2_UDC_BASE			0x4805e200
+#define OMAP2_OTG_BASE			0x4805e300
+#define OTG_BASE			OMAP1_OTG_BASE
+#define UDC_BASE			OMAP1_UDC_BASE
+#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
+
+/*
+ * OTG and transceiver registers, for OMAPs starting with ARM926
+ */
+#define OTG_REV				(OTG_BASE + 0x00)
+#define OTG_SYSCON_1			(OTG_BASE + 0x04)
+#	define	 USB2_TRX_MODE(w)	(((w)>>24)&0x07)
+#	define	 USB1_TRX_MODE(w)	(((w)>>20)&0x07)
+#	define	 USB0_TRX_MODE(w)	(((w)>>16)&0x07)
+#	define	 OTG_IDLE_EN		(1 << 15)
+#	define	 HST_IDLE_EN		(1 << 14)
+#	define	 DEV_IDLE_EN		(1 << 13)
+#	define	 OTG_RESET_DONE		(1 << 2)
+#	define	 OTG_SOFT_RESET		(1 << 1)
+#define OTG_SYSCON_2			(OTG_BASE + 0x08)
+#	define	 OTG_EN			(1 << 31)
+#	define	 USBX_SYNCHRO		(1 << 30)
+#	define	 OTG_MST16		(1 << 29)
+#	define	 SRP_GPDATA		(1 << 28)
+#	define	 SRP_GPDVBUS		(1 << 27)
+#	define	 SRP_GPUVBUS(w)		(((w)>>24)&0x07)
+#	define	 A_WAIT_VRISE(w)	(((w)>>20)&0x07)
+#	define	 B_ASE_BRST(w)		(((w)>>16)&0x07)
+#	define	 SRP_DPW		(1 << 14)
+#	define	 SRP_DATA		(1 << 13)
+#	define	 SRP_VBUS		(1 << 12)
+#	define	 OTG_PADEN		(1 << 10)
+#	define	 HMC_PADEN		(1 << 9)
+#	define	 UHOST_EN		(1 << 8)
+#	define	 HMC_TLLSPEED		(1 << 7)
+#	define	 HMC_TLLATTACH		(1 << 6)
+#	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
+#define OTG_CTRL			(OTG_BASE + 0x0c)
+#	define	 OTG_USB2_EN		(1 << 29)
+#	define	 OTG_USB2_DP		(1 << 28)
+#	define	 OTG_USB2_DM		(1 << 27)
+#	define	 OTG_USB1_EN		(1 << 26)
+#	define	 OTG_USB1_DP		(1 << 25)
+#	define	 OTG_USB1_DM		(1 << 24)
+#	define	 OTG_USB0_EN		(1 << 23)
+#	define	 OTG_USB0_DP		(1 << 22)
+#	define	 OTG_USB0_DM		(1 << 21)
+#	define	 OTG_ASESSVLD		(1 << 20)
+#	define	 OTG_BSESSEND		(1 << 19)
+#	define	 OTG_BSESSVLD		(1 << 18)
+#	define	 OTG_VBUSVLD		(1 << 17)
+#	define	 OTG_ID			(1 << 16)
+#	define	 OTG_DRIVER_SEL		(1 << 15)
+#	define	 OTG_A_SETB_HNPEN	(1 << 12)
+#	define	 OTG_A_BUSREQ		(1 << 11)
+#	define	 OTG_B_HNPEN		(1 << 9)
+#	define	 OTG_B_BUSREQ		(1 << 8)
+#	define	 OTG_BUSDROP		(1 << 7)
+#	define	 OTG_PULLDOWN		(1 << 5)
+#	define	 OTG_PULLUP		(1 << 4)
+#	define	 OTG_DRV_VBUS		(1 << 3)
+#	define	 OTG_PD_VBUS		(1 << 2)
+#	define	 OTG_PU_VBUS		(1 << 1)
+#	define	 OTG_PU_ID		(1 << 0)
+#define OTG_IRQ_EN			(OTG_BASE + 0x10)	/* 16-bit */
+#	define	 DRIVER_SWITCH		(1 << 15)
+#	define	 A_VBUS_ERR		(1 << 13)
+#	define	 A_REQ_TMROUT		(1 << 12)
+#	define	 A_SRP_DETECT		(1 << 11)
+#	define	 B_HNP_FAIL		(1 << 10)
+#	define	 B_SRP_TMROUT		(1 << 9)
+#	define	 B_SRP_DONE		(1 << 8)
+#	define	 B_SRP_STARTED		(1 << 7)
+#	define	 OPRT_CHG		(1 << 0)
+#define OTG_IRQ_SRC			(OTG_BASE + 0x14)	/* 16-bit */
+	// same bits as in IRQ_EN
+#define OTG_OUTCTRL			(OTG_BASE + 0x18)	/* 16-bit */
+#	define	 OTGVPD			(1 << 14)
+#	define	 OTGVPU			(1 << 13)
+#	define	 OTGPUID		(1 << 12)
+#	define	 USB2VDR		(1 << 10)
+#	define	 USB2PDEN		(1 << 9)
+#	define	 USB2PUEN		(1 << 8)
+#	define	 USB1VDR		(1 << 6)
+#	define	 USB1PDEN		(1 << 5)
+#	define	 USB1PUEN		(1 << 4)
+#	define	 USB0VDR		(1 << 2)
+#	define	 USB0PDEN		(1 << 1)
+#	define	 USB0PUEN		(1 << 0)
+#define OTG_TEST			(OTG_BASE + 0x20)	/* 16-bit */
+#define OTG_VENDOR_CODE			(OTG_BASE + 0xfc)	/* 16-bit */
+
+/*-------------------------------------------------------------------------*/
+
+/* OMAP1 */
+#define	USB_TRANSCEIVER_CTRL		(0xfffe1000 + 0x0064)
+#	define	CONF_USB2_UNI_R		(1 << 8)
+#	define	CONF_USB1_UNI_R		(1 << 7)
+#	define	CONF_USB_PORT0_R(x)	(((x)>>4)&0x7)
+#	define	CONF_USB0_ISOLATE_R	(1 << 3)
+#	define	CONF_USB_PWRDN_DM_R	(1 << 2)
+#	define	CONF_USB_PWRDN_DP_R	(1 << 1)
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
new file mode 100644
index 000000000..499b8accb
--- /dev/null
+++ b/arch/arm/mach-omap1/io.c
@@ -0,0 +1,182 @@
+/*
+ * linux/arch/arm/mach-omap1/io.c
+ *
+ * OMAP1 I/O mapping code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/tlb.h>
+#include <asm/mach/map.h>
+
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <linux/omap-dma.h>
+
+#include "iomap.h"
+#include "common.h"
+#include "clock.h"
+
+/*
+ * The machine specific code may provide the extra mapping besides the
+ * default mapping provided here.
+ */
+static struct map_desc omap_io_desc[] __initdata = {
+	{
+		.virtual	= OMAP1_IO_VIRT,
+		.pfn		= __phys_to_pfn(OMAP1_IO_PHYS),
+		.length		= OMAP1_IO_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+static struct map_desc omap7xx_io_desc[] __initdata = {
+	{
+		.virtual	= OMAP7XX_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP7XX_DSP_START),
+		.length		= OMAP7XX_DSP_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= OMAP7XX_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP7XX_DSPREG_START),
+		.length		= OMAP7XX_DSPREG_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+static struct map_desc omap1510_io_desc[] __initdata = {
+	{
+		.virtual	= OMAP1510_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP1510_DSP_START),
+		.length		= OMAP1510_DSP_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= OMAP1510_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP1510_DSPREG_START),
+		.length		= OMAP1510_DSPREG_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+static struct map_desc omap16xx_io_desc[] __initdata = {
+	{
+		.virtual	= OMAP16XX_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP16XX_DSP_START),
+		.length		= OMAP16XX_DSP_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= OMAP16XX_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP16XX_DSPREG_START),
+		.length		= OMAP16XX_DSPREG_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+#endif
+
+/*
+ * Maps common IO regions for omap1
+ */
+static void __init omap1_map_common_io(void)
+{
+	iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
+}
+
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+void __init omap7xx_map_io(void)
+{
+	omap1_map_common_io();
+	iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+void __init omap15xx_map_io(void)
+{
+	omap1_map_common_io();
+	iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+void __init omap16xx_map_io(void)
+{
+	omap1_map_common_io();
+	iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
+}
+#endif
+
+/*
+ * Common low-level hardware init for omap1.
+ */
+void __init omap1_init_early(void)
+{
+	omap_check_revision();
+
+	/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
+	 * on a Posted Write in the TIPB Bridge".
+	 */
+	omap_writew(0x0, MPU_PUBLIC_TIPB_CNTL);
+	omap_writew(0x0, MPU_PRIVATE_TIPB_CNTL);
+
+	/* Must init clocks early to assure that timer interrupt works
+	 */
+	omap1_clk_init();
+	omap1_mux_init();
+}
+
+void __init omap1_init_late(void)
+{
+	omap_serial_wakeup_init();
+}
+
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+
+u8 omap_readb(u32 pa)
+{
+	return __raw_readb(OMAP1_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readb);
+
+u16 omap_readw(u32 pa)
+{
+	return __raw_readw(OMAP1_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readw);
+
+u32 omap_readl(u32 pa)
+{
+	return __raw_readl(OMAP1_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readl);
+
+void omap_writeb(u8 v, u32 pa)
+{
+	__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writeb);
+
+void omap_writew(u16 v, u32 pa)
+{
+	__raw_writew(v, OMAP1_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writew);
+
+void omap_writel(u32 v, u32 pa)
+{
+	__raw_writel(v, OMAP1_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writel);
diff --git a/arch/arm/mach-omap1/iomap.h b/arch/arm/mach-omap1/iomap.h
new file mode 100644
index 000000000..f4e2d7a21
--- /dev/null
+++ b/arch/arm/mach-omap1/iomap.h
@@ -0,0 +1,33 @@
+/*
+ * IO mappings for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap1 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+#define OMAP1_IO_PHYS		0xFFFB0000
+#define OMAP1_IO_SIZE		0x40000
+#define OMAP1_IO_VIRT		(OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
new file mode 100644
index 000000000..a8a533df2
--- /dev/null
+++ b/arch/arm/mach-omap1/irq.c
@@ -0,0 +1,245 @@
+/*
+ * linux/arch/arm/mach-omap1/irq.c
+ *
+ * Interrupt handler for all OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ * Major cleanups by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * Completely re-written to support various OMAP chips with bank specific
+ * interrupt handlers.
+ *
+ * Some snippets of the code taken from the older OMAP interrupt handler
+ * Copyright (C) 2001 RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * GPIO interrupt handler moved to gpio.c by Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include "soc.h"
+
+#include <mach/hardware.h>
+
+#include "common.h"
+
+#define IRQ_BANK(irq) ((irq) >> 5)
+#define IRQ_BIT(irq)  ((irq) & 0x1f)
+
+struct omap_irq_bank {
+	unsigned long base_reg;
+	unsigned long trigger_map;
+	unsigned long wake_enable;
+};
+
+u32 omap_irq_flags;
+static unsigned int irq_bank_count;
+static struct omap_irq_bank *irq_banks;
+
+static inline void irq_bank_writel(unsigned long value, int bank, int offset)
+{
+	omap_writel(value, irq_banks[bank].base_reg + offset);
+}
+
+static void omap_ack_irq(struct irq_data *d)
+{
+	if (d->irq > 31)
+		omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG_OFFSET);
+
+	omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG_OFFSET);
+}
+
+static void omap_mask_irq(struct irq_data *d)
+{
+	int bank = IRQ_BANK(d->irq);
+	u32 l;
+
+	l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+	l |= 1 << IRQ_BIT(d->irq);
+	omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+}
+
+static void omap_unmask_irq(struct irq_data *d)
+{
+	int bank = IRQ_BANK(d->irq);
+	u32 l;
+
+	l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+	l &= ~(1 << IRQ_BIT(d->irq));
+	omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET);
+}
+
+static void omap_mask_ack_irq(struct irq_data *d)
+{
+	omap_mask_irq(d);
+	omap_ack_irq(d);
+}
+
+static int omap_wake_irq(struct irq_data *d, unsigned int enable)
+{
+	int bank = IRQ_BANK(d->irq);
+
+	if (enable)
+		irq_banks[bank].wake_enable |= IRQ_BIT(d->irq);
+	else
+		irq_banks[bank].wake_enable &= ~IRQ_BIT(d->irq);
+
+	return 0;
+}
+
+
+/*
+ * Allows tuning the IRQ type and priority
+ *
+ * NOTE: There is currently no OMAP fiq handler for Linux. Read the
+ *	 mailing list threads on FIQ handlers if you are planning to
+ *	 add a FIQ handler for OMAP.
+ */
+static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
+{
+	signed int bank;
+	unsigned long val, offset;
+
+	bank = IRQ_BANK(irq);
+	/* FIQ is only available on bank 0 interrupts */
+	fiq = bank ? 0 : (fiq & 0x1);
+	val = fiq | ((priority & 0x1f) << 2) | ((trigger & 0x1) << 1);
+	offset = IRQ_ILR0_REG_OFFSET + IRQ_BIT(irq) * 0x4;
+	irq_bank_writel(val, bank, offset);
+}
+
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+static struct omap_irq_bank omap7xx_irq_banks[] = {
+	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
+	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
+	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+static struct omap_irq_bank omap1510_irq_banks[] = {
+	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3febfff },
+	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xffbfffed },
+};
+static struct omap_irq_bank omap310_irq_banks[] = {
+	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3faefc3 },
+	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0x65b3c061 },
+};
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+
+static struct omap_irq_bank omap1610_irq_banks[] = {
+	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3fefe8f },
+	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb7c1fd },
+	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0xffffb7ff },
+	{ .base_reg = OMAP_IH2_BASE + 0x200,	.trigger_map = 0xffffffff },
+};
+#endif
+
+static struct irq_chip omap_irq_chip = {
+	.name		= "MPU",
+	.irq_ack	= omap_mask_ack_irq,
+	.irq_mask	= omap_mask_irq,
+	.irq_unmask	= omap_unmask_irq,
+	.irq_set_wake	= omap_wake_irq,
+};
+
+void __init omap1_init_irq(void)
+{
+	int i, j;
+
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	if (cpu_is_omap7xx()) {
+		omap_irq_flags = INT_7XX_IH2_IRQ;
+		irq_banks = omap7xx_irq_banks;
+		irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	if (cpu_is_omap1510()) {
+		omap_irq_flags = INT_1510_IH2_IRQ;
+		irq_banks = omap1510_irq_banks;
+		irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
+	}
+	if (cpu_is_omap310()) {
+		omap_irq_flags = INT_1510_IH2_IRQ;
+		irq_banks = omap310_irq_banks;
+		irq_bank_count = ARRAY_SIZE(omap310_irq_banks);
+	}
+#endif
+#if defined(CONFIG_ARCH_OMAP16XX)
+	if (cpu_is_omap16xx()) {
+		omap_irq_flags = INT_1510_IH2_IRQ;
+		irq_banks = omap1610_irq_banks;
+		irq_bank_count = ARRAY_SIZE(omap1610_irq_banks);
+	}
+#endif
+	printk("Total of %i interrupts in %i interrupt banks\n",
+	       irq_bank_count * 32, irq_bank_count);
+
+	/* Mask and clear all interrupts */
+	for (i = 0; i < irq_bank_count; i++) {
+		irq_bank_writel(~0x0, i, IRQ_MIR_REG_OFFSET);
+		irq_bank_writel(0x0, i, IRQ_ITR_REG_OFFSET);
+	}
+
+	/* Clear any pending interrupts */
+	irq_bank_writel(0x03, 0, IRQ_CONTROL_REG_OFFSET);
+	irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET);
+
+	/* Enable interrupts in global mask */
+	if (cpu_is_omap7xx())
+		irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET);
+
+	/* Install the interrupt handlers for each bank */
+	for (i = 0; i < irq_bank_count; i++) {
+		for (j = i * 32; j < (i + 1) * 32; j++) {
+			int irq_trigger;
+
+			irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j);
+			omap_irq_set_cfg(j, 0, 0, irq_trigger);
+
+			irq_set_chip_and_handler(j, &omap_irq_chip,
+						 handle_level_irq);
+			set_irq_flags(j, IRQF_VALID);
+		}
+	}
+
+	/* Unmask level 2 handler */
+
+	if (cpu_is_omap7xx())
+		omap_unmask_irq(irq_get_irq_data(INT_7XX_IH2_IRQ));
+	else if (cpu_is_omap15xx())
+		omap_unmask_irq(irq_get_irq_data(INT_1510_IH2_IRQ));
+	else if (cpu_is_omap16xx())
+		omap_unmask_irq(irq_get_irq_data(INT_1610_IH2_IRQ));
+}
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
new file mode 100644
index 000000000..26a2b01c7
--- /dev/null
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -0,0 +1,445 @@
+/*
+ * linux/arch/arm/mach-omap1/lcd_dma.c
+ *
+ * Extracted from arch/arm/plat-omap/dma.c
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
+ * Graphics DMA and LCD DMA graphics tranformations
+ * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
+ * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
+ * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Support functions for the OMAP internal DMA channels.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <linux/omap-dma.h>
+
+#include <mach/hardware.h>
+#include <mach/lcdc.h>
+
+int omap_lcd_dma_running(void)
+{
+	/*
+	 * On OMAP1510, internal LCD controller will start the transfer
+	 * when it gets enabled, so assume DMA running if LCD enabled.
+	 */
+	if (cpu_is_omap15xx())
+		if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
+			return 1;
+
+	/* Check if LCD DMA is running */
+	if (cpu_is_omap16xx())
+		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+			return 1;
+
+	return 0;
+}
+
+static struct lcd_dma_info {
+	spinlock_t lock;
+	int reserved;
+	void (*callback)(u16 status, void *data);
+	void *cb_data;
+
+	int active;
+	unsigned long addr;
+	int rotate, data_type, xres, yres;
+	int vxres;
+	int mirror;
+	int xscale, yscale;
+	int ext_ctrl;
+	int src_port;
+	int single_transfer;
+} lcd_dma;
+
+void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+			 int data_type)
+{
+	lcd_dma.addr = addr;
+	lcd_dma.data_type = data_type;
+	lcd_dma.xres = fb_xres;
+	lcd_dma.yres = fb_yres;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1);
+
+void omap_set_lcd_dma_ext_controller(int external)
+{
+	lcd_dma.ext_ctrl = external;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
+
+void omap_set_lcd_dma_single_transfer(int single)
+{
+	lcd_dma.single_transfer = single;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
+
+void omap_set_lcd_dma_b1_rotation(int rotate)
+{
+	if (cpu_is_omap15xx()) {
+		printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
+		BUG();
+		return;
+	}
+	lcd_dma.rotate = rotate;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
+
+void omap_set_lcd_dma_b1_mirror(int mirror)
+{
+	if (cpu_is_omap15xx()) {
+		printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
+		BUG();
+	}
+	lcd_dma.mirror = mirror;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
+
+void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
+{
+	if (cpu_is_omap15xx()) {
+		pr_err("DMA virtual resolution is not supported in 1510 mode\n");
+		BUG();
+	}
+	lcd_dma.vxres = vxres;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
+
+void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
+{
+	if (cpu_is_omap15xx()) {
+		printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
+		BUG();
+	}
+	lcd_dma.xscale = xscale;
+	lcd_dma.yscale = yscale;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
+
+static void set_b1_regs(void)
+{
+	unsigned long top, bottom;
+	int es;
+	u16 w;
+	unsigned long en, fn;
+	long ei, fi;
+	unsigned long vxres;
+	unsigned int xscale, yscale;
+
+	switch (lcd_dma.data_type) {
+	case OMAP_DMA_DATA_TYPE_S8:
+		es = 1;
+		break;
+	case OMAP_DMA_DATA_TYPE_S16:
+		es = 2;
+		break;
+	case OMAP_DMA_DATA_TYPE_S32:
+		es = 4;
+		break;
+	default:
+		BUG();
+		return;
+	}
+
+	vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
+	xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
+	yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
+	BUG_ON(vxres < lcd_dma.xres);
+
+#define PIXADDR(x, y) (lcd_dma.addr +					\
+		((y) * vxres * yscale + (x) * xscale) * es)
+#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
+
+	switch (lcd_dma.rotate) {
+	case 0:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(0, 0);
+			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			/* 1510 DMA requires the bottom address to be 2 more
+			 * than the actual last memory access location. */
+			if (cpu_is_omap15xx() &&
+				lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
+					bottom += 2;
+			ei = PIXSTEP(0, 0, 1, 0);
+			fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
+		} else {
+			top = PIXADDR(lcd_dma.xres - 1, 0);
+			bottom = PIXADDR(0, lcd_dma.yres - 1);
+			ei = PIXSTEP(1, 0, 0, 0);
+			fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
+		}
+		en = lcd_dma.xres;
+		fn = lcd_dma.yres;
+		break;
+	case 90:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(0, lcd_dma.yres - 1);
+			bottom = PIXADDR(lcd_dma.xres - 1, 0);
+			ei = PIXSTEP(0, 1, 0, 0);
+			fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
+		} else {
+			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			bottom = PIXADDR(0, 0);
+			ei = PIXSTEP(0, 1, 0, 0);
+			fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
+		}
+		en = lcd_dma.yres;
+		fn = lcd_dma.xres;
+		break;
+	case 180:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			bottom = PIXADDR(0, 0);
+			ei = PIXSTEP(1, 0, 0, 0);
+			fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
+		} else {
+			top = PIXADDR(0, lcd_dma.yres - 1);
+			bottom = PIXADDR(lcd_dma.xres - 1, 0);
+			ei = PIXSTEP(0, 0, 1, 0);
+			fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
+		}
+		en = lcd_dma.xres;
+		fn = lcd_dma.yres;
+		break;
+	case 270:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(lcd_dma.xres - 1, 0);
+			bottom = PIXADDR(0, lcd_dma.yres - 1);
+			ei = PIXSTEP(0, 0, 0, 1);
+			fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
+		} else {
+			top = PIXADDR(0, 0);
+			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			ei = PIXSTEP(0, 0, 0, 1);
+			fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
+		}
+		en = lcd_dma.yres;
+		fn = lcd_dma.xres;
+		break;
+	default:
+		BUG();
+		return;	/* Suppress warning about uninitialized vars */
+	}
+
+	if (cpu_is_omap15xx()) {
+		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
+		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
+		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
+		omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
+
+		return;
+	}
+
+	/* 1610 regs */
+	omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
+	omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
+	omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
+	omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
+
+	omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
+	omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CSDP);
+	w &= ~0x03;
+	w |= lcd_dma.data_type;
+	omap_writew(w, OMAP1610_DMA_LCD_CSDP);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	/* Always set the source port as SDRAM for now*/
+	w &= ~(0x03 << 6);
+	if (lcd_dma.callback != NULL)
+		w |= 1 << 1;		/* Block interrupt enable */
+	else
+		w &= ~(1 << 1);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+
+	if (!(lcd_dma.rotate || lcd_dma.mirror ||
+	      lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	/* Set the double-indexed addressing mode */
+	w |= (0x03 << 12);
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
+	omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
+	omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
+	omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
+}
+
+static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
+{
+	u16 w;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	if (unlikely(!(w & (1 << 3)))) {
+		printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
+		return IRQ_NONE;
+	}
+	/* Ack the IRQ */
+	w |= (1 << 3);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+	lcd_dma.active = 0;
+	if (lcd_dma.callback != NULL)
+		lcd_dma.callback(w, lcd_dma.cb_data);
+
+	return IRQ_HANDLED;
+}
+
+int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+			 void *data)
+{
+	spin_lock_irq(&lcd_dma.lock);
+	if (lcd_dma.reserved) {
+		spin_unlock_irq(&lcd_dma.lock);
+		printk(KERN_ERR "LCD DMA channel already reserved\n");
+		BUG();
+		return -EBUSY;
+	}
+	lcd_dma.reserved = 1;
+	spin_unlock_irq(&lcd_dma.lock);
+	lcd_dma.callback = callback;
+	lcd_dma.cb_data = data;
+	lcd_dma.active = 0;
+	lcd_dma.single_transfer = 0;
+	lcd_dma.rotate = 0;
+	lcd_dma.vxres = 0;
+	lcd_dma.mirror = 0;
+	lcd_dma.xscale = 0;
+	lcd_dma.yscale = 0;
+	lcd_dma.ext_ctrl = 0;
+	lcd_dma.src_port = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL(omap_request_lcd_dma);
+
+void omap_free_lcd_dma(void)
+{
+	spin_lock(&lcd_dma.lock);
+	if (!lcd_dma.reserved) {
+		spin_unlock(&lcd_dma.lock);
+		printk(KERN_ERR "LCD DMA is not reserved\n");
+		BUG();
+		return;
+	}
+	if (!cpu_is_omap15xx())
+		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
+			    OMAP1610_DMA_LCD_CCR);
+	lcd_dma.reserved = 0;
+	spin_unlock(&lcd_dma.lock);
+}
+EXPORT_SYMBOL(omap_free_lcd_dma);
+
+void omap_enable_lcd_dma(void)
+{
+	u16 w;
+
+	/*
+	 * Set the Enable bit only if an external controller is
+	 * connected. Otherwise the OMAP internal controller will
+	 * start the transfer when it gets enabled.
+	 */
+	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	w |= 1 << 8;
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+
+	lcd_dma.active = 1;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	w |= 1 << 7;
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+}
+EXPORT_SYMBOL(omap_enable_lcd_dma);
+
+void omap_setup_lcd_dma(void)
+{
+	BUG_ON(lcd_dma.active);
+	if (!cpu_is_omap15xx()) {
+		/* Set some reasonable defaults */
+		omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
+		omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
+		omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
+	}
+	set_b1_regs();
+	if (!cpu_is_omap15xx()) {
+		u16 w;
+
+		w = omap_readw(OMAP1610_DMA_LCD_CCR);
+		/*
+		 * If DMA was already active set the end_prog bit to have
+		 * the programmed register set loaded into the active
+		 * register set.
+		 */
+		w |= 1 << 11;		/* End_prog */
+		if (!lcd_dma.single_transfer)
+			w |= (3 << 8);	/* Auto_init, repeat */
+		omap_writew(w, OMAP1610_DMA_LCD_CCR);
+	}
+}
+EXPORT_SYMBOL(omap_setup_lcd_dma);
+
+void omap_stop_lcd_dma(void)
+{
+	u16 w;
+
+	lcd_dma.active = 0;
+	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	w &= ~(1 << 7);
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	w &= ~(1 << 8);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+}
+EXPORT_SYMBOL(omap_stop_lcd_dma);
+
+static int __init omap_init_lcd_dma(void)
+{
+	int r;
+
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
+	if (cpu_is_omap16xx()) {
+		u16 w;
+
+		/* this would prevent OMAP sleep */
+		w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+		w &= ~(1 << 8);
+		omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+	}
+
+	spin_lock_init(&lcd_dma.lock);
+
+	r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
+			"LCD DMA", NULL);
+	if (r != 0)
+		pr_err("unable to request IRQ for LCD DMA (error %d)\n", r);
+
+	return r;
+}
+
+arch_initcall(omap_init_lcd_dma);
+
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
new file mode 100644
index 000000000..8ed67f8d1
--- /dev/null
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -0,0 +1,446 @@
+/*
+ * linux/arch/arm/mach-omap1/mcbsp.c
+ *
+ * Copyright (C) 2008 Instituto Nokia de Tecnologia
+ * Contact: Eduardo Valentin <eduardo.valentin@indt.org.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Multichannel mode not supported.
+ */
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/omap-dma.h>
+#include <mach/mux.h>
+#include "soc.h"
+#include <linux/platform_data/asoc-ti-mcbsp.h>
+
+#include <mach/irqs.h>
+
+#include "iomap.h"
+
+#define DPS_RSTCT2_PER_EN	(1 << 0)
+#define DSP_RSTCT2_WD_PER_EN	(1 << 1)
+
+static int dsp_use;
+static struct clk *api_clk;
+static struct clk *dsp_clk;
+static struct platform_device **omap_mcbsp_devices;
+
+static void omap1_mcbsp_request(unsigned int id)
+{
+	/*
+	 * On 1510, 1610 and 1710, McBSP1 and McBSP3
+	 * are DSP public peripherals.
+	 */
+	if (id == 0 || id == 2) {
+		if (dsp_use++ == 0) {
+			api_clk = clk_get(NULL, "api_ck");
+			dsp_clk = clk_get(NULL, "dsp_ck");
+			if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
+				clk_enable(api_clk);
+				clk_enable(dsp_clk);
+
+				/*
+				 * DSP external peripheral reset
+				 * FIXME: This should be moved to dsp code
+				 */
+				__raw_writew(__raw_readw(DSP_RSTCT2) | DPS_RSTCT2_PER_EN |
+						DSP_RSTCT2_WD_PER_EN, DSP_RSTCT2);
+			}
+		}
+	}
+}
+
+static void omap1_mcbsp_free(unsigned int id)
+{
+	if (id == 0 || id == 2) {
+		if (--dsp_use == 0) {
+			if (!IS_ERR(api_clk)) {
+				clk_disable(api_clk);
+				clk_put(api_clk);
+			}
+			if (!IS_ERR(dsp_clk)) {
+				clk_disable(dsp_clk);
+				clk_put(dsp_clk);
+			}
+		}
+	}
+}
+
+static struct omap_mcbsp_ops omap1_mcbsp_ops = {
+	.request	= omap1_mcbsp_request,
+	.free		= omap1_mcbsp_free,
+};
+
+#define OMAP7XX_MCBSP1_BASE	0xfffb1000
+#define OMAP7XX_MCBSP2_BASE	0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE	0xe1011800
+#define OMAP1510_MCBSP2_BASE	0xfffb1000
+#define OMAP1510_MCBSP3_BASE	0xe1017000
+
+#define OMAP1610_MCBSP1_BASE	0xe1011800
+#define OMAP1610_MCBSP2_BASE	0xfffb1000
+#define OMAP1610_MCBSP3_BASE	0xe1017000
+
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+struct resource omap7xx_mcbsp_res[][6] = {
+	{
+		{
+			.start = OMAP7XX_MCBSP1_BASE,
+			.end   = OMAP7XX_MCBSP1_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_7XX_McBSP1RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_7XX_McBSP1TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = 9,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = 8,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+	{
+		{
+			.start = OMAP7XX_MCBSP2_BASE,
+			.end   = OMAP7XX_MCBSP2_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_7XX_McBSP2RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_7XX_McBSP2TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = 11,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = 10,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+};
+
+#define omap7xx_mcbsp_res_0		omap7xx_mcbsp_res[0]
+
+static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
+	{
+		.ops		= &omap1_mcbsp_ops,
+	},
+	{
+		.ops		= &omap1_mcbsp_ops,
+	},
+};
+#define OMAP7XX_MCBSP_RES_SZ		ARRAY_SIZE(omap7xx_mcbsp_res[1])
+#define OMAP7XX_MCBSP_COUNT		ARRAY_SIZE(omap7xx_mcbsp_res)
+#else
+#define omap7xx_mcbsp_res_0		NULL
+#define omap7xx_mcbsp_pdata		NULL
+#define OMAP7XX_MCBSP_RES_SZ		0
+#define OMAP7XX_MCBSP_COUNT		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP15XX
+struct resource omap15xx_mcbsp_res[][6] = {
+	{
+		{
+			.start = OMAP1510_MCBSP1_BASE,
+			.end   = OMAP1510_MCBSP1_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_McBSP1RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_McBSP1TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = 9,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = 8,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+	{
+		{
+			.start = OMAP1510_MCBSP2_BASE,
+			.end   = OMAP1510_MCBSP2_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_1510_SPI_RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_1510_SPI_TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = 17,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = 16,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+	{
+		{
+			.start = OMAP1510_MCBSP3_BASE,
+			.end   = OMAP1510_MCBSP3_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_McBSP3RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_McBSP3TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = 11,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = 10,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+};
+
+#define omap15xx_mcbsp_res_0		omap15xx_mcbsp_res[0]
+
+static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
+	{
+		.ops		= &omap1_mcbsp_ops,
+	},
+	{
+		.ops		= &omap1_mcbsp_ops,
+	},
+	{
+		.ops		= &omap1_mcbsp_ops,
+	},
+};
+#define OMAP15XX_MCBSP_RES_SZ		ARRAY_SIZE(omap15xx_mcbsp_res[1])
+#define OMAP15XX_MCBSP_COUNT		ARRAY_SIZE(omap15xx_mcbsp_res)
+#else
+#define omap15xx_mcbsp_res_0		NULL
+#define omap15xx_mcbsp_pdata		NULL
+#define OMAP15XX_MCBSP_RES_SZ		0
+#define OMAP15XX_MCBSP_COUNT		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP16XX
+struct resource omap16xx_mcbsp_res[][6] = {
+	{
+		{
+			.start = OMAP1610_MCBSP1_BASE,
+			.end   = OMAP1610_MCBSP1_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_McBSP1RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_McBSP1TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = 9,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = 8,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+	{
+		{
+			.start = OMAP1610_MCBSP2_BASE,
+			.end   = OMAP1610_MCBSP2_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_1610_McBSP2_RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_1610_McBSP2_TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = 17,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = 16,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+	{
+		{
+			.start = OMAP1610_MCBSP3_BASE,
+			.end   = OMAP1610_MCBSP3_BASE + SZ_256,
+			.flags = IORESOURCE_MEM,
+		},
+		{
+			.name  = "rx",
+			.start = INT_McBSP3RX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "tx",
+			.start = INT_McBSP3TX,
+			.flags = IORESOURCE_IRQ,
+		},
+		{
+			.name  = "rx",
+			.start = 11,
+			.flags = IORESOURCE_DMA,
+		},
+		{
+			.name  = "tx",
+			.start = 10,
+			.flags = IORESOURCE_DMA,
+		},
+	},
+};
+
+#define omap16xx_mcbsp_res_0		omap16xx_mcbsp_res[0]
+
+static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
+	{
+		.ops		= &omap1_mcbsp_ops,
+	},
+	{
+		.ops		= &omap1_mcbsp_ops,
+	},
+	{
+		.ops		= &omap1_mcbsp_ops,
+	},
+};
+#define OMAP16XX_MCBSP_RES_SZ		ARRAY_SIZE(omap16xx_mcbsp_res[1])
+#define OMAP16XX_MCBSP_COUNT		ARRAY_SIZE(omap16xx_mcbsp_res)
+#else
+#define omap16xx_mcbsp_res_0		NULL
+#define omap16xx_mcbsp_pdata		NULL
+#define OMAP16XX_MCBSP_RES_SZ		0
+#define OMAP16XX_MCBSP_COUNT		0
+#endif
+
+static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
+			struct omap_mcbsp_platform_data *config, int size)
+{
+	int i;
+
+	omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
+				     GFP_KERNEL);
+	if (!omap_mcbsp_devices) {
+		printk(KERN_ERR "Could not register McBSP devices\n");
+		return;
+	}
+
+	for (i = 0; i < size; i++) {
+		struct platform_device *new_mcbsp;
+		int ret;
+
+		new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
+		if (!new_mcbsp)
+			continue;
+		platform_device_add_resources(new_mcbsp, &res[i * res_count],
+					res_count);
+		config[i].reg_size = 2;
+		config[i].reg_step = 2;
+		new_mcbsp->dev.platform_data = &config[i];
+		ret = platform_device_add(new_mcbsp);
+		if (ret) {
+			platform_device_put(new_mcbsp);
+			continue;
+		}
+		omap_mcbsp_devices[i] = new_mcbsp;
+	}
+}
+
+static int __init omap1_mcbsp_init(void)
+{
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
+	if (cpu_is_omap7xx())
+		omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res_0,
+					OMAP7XX_MCBSP_RES_SZ,
+					omap7xx_mcbsp_pdata,
+					OMAP7XX_MCBSP_COUNT);
+
+	if (cpu_is_omap15xx())
+		omap_mcbsp_register_board_cfg(omap15xx_mcbsp_res_0,
+					OMAP15XX_MCBSP_RES_SZ,
+					omap15xx_mcbsp_pdata,
+					OMAP15XX_MCBSP_COUNT);
+
+	if (cpu_is_omap16xx())
+		omap_mcbsp_register_board_cfg(omap16xx_mcbsp_res_0,
+					OMAP16XX_MCBSP_RES_SZ,
+					omap16xx_mcbsp_pdata,
+					OMAP16XX_MCBSP_COUNT);
+
+	return 0;
+}
+
+arch_initcall(omap1_mcbsp_init);
diff --git a/arch/arm/mach-omap1/mmc.h b/arch/arm/mach-omap1/mmc.h
new file mode 100644
index 000000000..39c2b13de
--- /dev/null
+++ b/arch/arm/mach-omap1/mmc.h
@@ -0,0 +1,18 @@
+#include <linux/mmc/host.h>
+#include <linux/platform_data/mmc-omap.h>
+
+#define OMAP15XX_NR_MMC		1
+#define OMAP16XX_NR_MMC		2
+#define OMAP1_MMC_SIZE		0x080
+#define OMAP1_MMC1_BASE		0xfffb7800
+#define OMAP1_MMC2_BASE		0xfffb7c00	/* omap16xx only */
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers);
+#else
+static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers)
+{
+}
+#endif
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
new file mode 100644
index 000000000..667ce5027
--- /dev/null
+++ b/arch/arm/mach-omap1/mux.c
@@ -0,0 +1,525 @@
+/*
+ * linux/arch/arm/mach-omap1/mux.c
+ *
+ * OMAP1 pin multiplexing configurations
+ *
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
+
+#include <mach/mux.h>
+
+#ifdef CONFIG_OMAP_MUX
+
+static struct omap_mux_cfg arch_mux_cfg;
+
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+static struct pin_config __initdata_or_module omap7xx_pins[] = {
+MUX_CFG_7XX("E2_7XX_KBR0",        12,   21,    0,   20,   1, 0)
+MUX_CFG_7XX("J7_7XX_KBR1",        12,   25,    0,   24,   1, 0)
+MUX_CFG_7XX("E1_7XX_KBR2",        12,   29,    0,   28,   1, 0)
+MUX_CFG_7XX("F3_7XX_KBR3",        13,    1,    0,    0,   1, 0)
+MUX_CFG_7XX("D2_7XX_KBR4",        13,    5,    0,    4,   1, 0)
+MUX_CFG_7XX("C2_7XX_KBC0",        13,    9,    0,    8,   1, 0)
+MUX_CFG_7XX("D3_7XX_KBC1",        13,   13,    0,   12,   1, 0)
+MUX_CFG_7XX("E4_7XX_KBC2",        13,   17,    0,   16,   1, 0)
+MUX_CFG_7XX("F4_7XX_KBC3",        13,   21,    0,   20,   1, 0)
+MUX_CFG_7XX("E3_7XX_KBC4",        13,   25,    0,   24,   1, 0)
+
+MUX_CFG_7XX("AA17_7XX_USB_DM",     2,   21,    0,   20,   0, 0)
+MUX_CFG_7XX("W16_7XX_USB_PU_EN",   2,   25,    0,   24,   0, 0)
+MUX_CFG_7XX("W17_7XX_USB_VBUSI",   2,   29,    6,   28,   1, 0)
+MUX_CFG_7XX("W18_7XX_USB_DMCK_OUT",3,    3,    1,    2,   0, 0)
+MUX_CFG_7XX("W19_7XX_USB_DCRST",   3,    7,    1,    6,   0, 0)
+
+/* MMC Pins */
+MUX_CFG_7XX("MMC_7XX_CMD",         2,    9,    0,    8,   1, 0)
+MUX_CFG_7XX("MMC_7XX_CLK",         2,   13,    0,   12,   1, 0)
+MUX_CFG_7XX("MMC_7XX_DAT0",        2,   17,    0,   16,   1, 0)
+
+/* I2C interface */
+MUX_CFG_7XX("I2C_7XX_SCL",         5,    1,    0,    0,   1, 0)
+MUX_CFG_7XX("I2C_7XX_SDA",         5,    5,    0,    0,   1, 0)
+
+/* SPI pins */
+MUX_CFG_7XX("SPI_7XX_1",           6,    5,    4,    4,   1, 0)
+MUX_CFG_7XX("SPI_7XX_2",           6,    9,    4,    8,   1, 0)
+MUX_CFG_7XX("SPI_7XX_3",           6,   13,    4,   12,   1, 0)
+MUX_CFG_7XX("SPI_7XX_4",           6,   17,    4,   16,   1, 0)
+MUX_CFG_7XX("SPI_7XX_5",           8,   25,    0,   24,   0, 0)
+MUX_CFG_7XX("SPI_7XX_6",           9,    5,    0,    4,   0, 0)
+
+/* UART pins */
+MUX_CFG_7XX("UART_7XX_1",          3,   21,    0,   20,   0, 0)
+MUX_CFG_7XX("UART_7XX_2",          8,    1,    6,    0,   0, 0)
+};
+#define OMAP7XX_PINS_SZ		ARRAY_SIZE(omap7xx_pins)
+#else
+#define omap7xx_pins		NULL
+#define OMAP7XX_PINS_SZ		0
+#endif	/* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
+static struct pin_config __initdata_or_module omap1xxx_pins[] = {
+/*
+ *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
+ *				reg  offset mode reg  bit   ena	  reg
+ */
+MUX_CFG("UART1_TX",		 9,   21,    1,	  2,   3,   0,	 NA,	 0,  0)
+MUX_CFG("UART1_RTS",		 9,   12,    1,	  2,   0,   0,	 NA,	 0,  0)
+
+/* UART2 (COM_UART_GATING), conflicts with USB2 */
+MUX_CFG("UART2_TX",		 C,   27,    1,	  3,   3,   0,	 NA,	 0,  0)
+MUX_CFG("UART2_RX",		 C,   18,    0,	  3,   1,   1,	 NA,	 0,  0)
+MUX_CFG("UART2_CTS",		 C,   21,    0,	  3,   1,   1,	 NA,	 0,  0)
+MUX_CFG("UART2_RTS",		 C,   24,    1,	  3,   2,   0,	 NA,	 0,  0)
+
+/* UART3 (GIGA_UART_GATING) */
+MUX_CFG("UART3_TX",		 6,    0,    1,	  0,  30,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_RX",		 6,    3,    0,	  0,  31,   1,	 NA,	 0,  0)
+MUX_CFG("UART3_CTS",		 5,   12,    2,	  0,  24,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_RTS",		 5,   15,    2,	  0,  25,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_CLKREQ",		 9,   27,    0,	  2,   5,   0,	 NA,	 0,  0)
+MUX_CFG("UART3_BCLK",		 A,    0,    0,	  2,   6,   0,	 NA,	 0,  0)
+MUX_CFG("Y15_1610_UART3_RTS",	 A,    0,    1,	  2,   6,   0,	 NA,	 0,  0)
+
+/* PWT & PWL, conflicts with UART3 */
+MUX_CFG("PWT",			 6,    0,    2,	  0,  30,   0,	 NA,	 0,  0)
+MUX_CFG("PWL",			 6,    3,    1,	  0,  31,   1,	 NA,	 0,  0)
+
+/* USB internal master generic */
+MUX_CFG("R18_USB_VBUS",		 7,    9,    2,	  1,  11,   0,	 NA,	 0,  1)
+MUX_CFG("R18_1510_USB_GPIO0",	 7,    9,    0,	  1,  11,   1,	 NA,	 0,  1)
+/* works around erratum:  W4_USB_PUEN and W4_USB_PUDIS are switched! */
+MUX_CFG("W4_USB_PUEN",		 D,    3,    3,	  3,   5,   1,	 NA,	 0,  1)
+MUX_CFG("W4_USB_CLKO",		 D,    3,    1,	  3,   5,   0,	 NA,	 0,  1)
+MUX_CFG("W4_USB_HIGHZ",		 D,    3,    4,	  3,   5,   0,	  3,	 0,  1)
+MUX_CFG("W4_GPIO58",		 D,    3,    7,	  3,   5,   0,	  3,	 0,  1)
+
+/* USB1 master */
+MUX_CFG("USB1_SUSP",		 8,   27,    2,	  1,  27,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_SE0",		 9,    0,    2,	  1,  28,   0,	 NA,	 0,  1)
+MUX_CFG("W13_1610_USB1_SE0",	 9,    0,    4,	  1,  28,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_TXEN",		 9,    3,    2,	  1,  29,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_TXD",		 9,   24,    1,	  2,   4,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_VP",		 A,    3,    1,	  2,   7,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_VM",		 A,    6,    1,	  2,   8,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_RCV",		 A,    9,    1,	  2,   9,   0,	 NA,	 0,  1)
+MUX_CFG("USB1_SPEED",		 A,   12,    2,	  2,  10,   0,	 NA,	 0,  1)
+MUX_CFG("R13_1610_USB1_SPEED",	 A,   12,    5,	  2,  10,   0,	 NA,	 0,  1)
+MUX_CFG("R13_1710_USB1_SEO",	 A,   12,    5,   2,  10,   0,   NA,     0,  1)
+
+/* USB2 master */
+MUX_CFG("USB2_SUSP",		 B,    3,    1,	  2,  17,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_VP",		 B,    6,    1,	  2,  18,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_TXEN",		 B,    9,    1,	  2,  19,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_VM",		 C,   18,    1,	  3,   0,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_RCV",		 C,   21,    1,	  3,   1,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_SE0",		 C,   24,    2,	  3,   2,   0,	 NA,	 0,  1)
+MUX_CFG("USB2_TXD",		 C,   27,    2,	  3,   3,   0,	 NA,	 0,  1)
+
+/* OMAP-1510 GPIO */
+MUX_CFG("R18_1510_GPIO0",	 7,    9,    0,   1,  11,   1,    0,     0,  1)
+MUX_CFG("R19_1510_GPIO1",	 7,    6,    0,   1,  10,   1,    0,     0,  1)
+MUX_CFG("M14_1510_GPIO2",	 7,    3,    0,   1,   9,   1,    0,     0,  1)
+
+/* OMAP1610 GPIO */
+MUX_CFG("P18_1610_GPIO3",	 7,    0,    0,   1,   8,   0,   NA,     0,  1)
+MUX_CFG("Y15_1610_GPIO17",	 A,    0,    7,   2,   6,   0,   NA,     0,  1)
+
+/* OMAP-1710 GPIO */
+MUX_CFG("R18_1710_GPIO0",        7,    9,    0,   1,  11,   1,    1,     1,  1)
+MUX_CFG("V2_1710_GPIO10",        F,   27,    1,   4,   3,   1,    4,     1,  1)
+MUX_CFG("N21_1710_GPIO14",       6,    9,    0,   1,   1,   1,    1,     1,  1)
+MUX_CFG("W15_1710_GPIO40",       9,   27,    7,   2,   5,   1,    2,     1,  1)
+
+/* MPUIO */
+MUX_CFG("MPUIO2",		 7,   18,    0,	  1,  14,   1,	 NA,	 0,  1)
+MUX_CFG("N15_1610_MPUIO2",	 7,   18,    0,	  1,  14,   1,	  1,	 0,  1)
+MUX_CFG("MPUIO4",		 7,   15,    0,	  1,  13,   1,	 NA,	 0,  1)
+MUX_CFG("MPUIO5",		 7,   12,    0,	  1,  12,   1,	 NA,	 0,  1)
+
+MUX_CFG("T20_1610_MPUIO5",	 7,   12,    0,	  1,  12,   0,	  3,	 0,  1)
+MUX_CFG("W11_1610_MPUIO6",	10,   15,    2,	  3,   8,   0,	  3,	 0,  1)
+MUX_CFG("V10_1610_MPUIO7",	 A,   24,    2,	  2,  14,   0,	  2,	 0,  1)
+MUX_CFG("W11_1610_MPUIO9",	10,   15,    1,	  3,   8,   0,	  3,	 0,  1)
+MUX_CFG("V10_1610_MPUIO10",	 A,   24,    1,	  2,  14,   0,	  2,	 0,  1)
+MUX_CFG("W10_1610_MPUIO11",	 A,   18,    2,	  2,  11,   0,	  2,	 0,  1)
+MUX_CFG("E20_1610_MPUIO13",	 3,   21,    1,	  0,   7,   0,	  0,	 0,  1)
+MUX_CFG("U20_1610_MPUIO14",	 9,    6,    6,	  0,  30,   0,	  0,	 0,  1)
+MUX_CFG("E19_1610_MPUIO15",	 3,   18,    1,	  0,   6,   0,	  0,	 0,  1)
+
+/* MCBSP2 */
+MUX_CFG("MCBSP2_CLKR",		 C,    6,    0,	  2,  27,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_CLKX",		 C,    9,    0,	  2,  29,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_DR",		 C,    0,    0,	  2,  26,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_DX",		 C,   15,    0,	  2,  31,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_FSR",		 C,   12,    0,	  2,  30,   1,	 NA,	 0,  1)
+MUX_CFG("MCBSP2_FSX",		 C,    3,    0,	  2,  27,   1,	 NA,	 0,  1)
+
+/* MCBSP3 NOTE: Mode must 1 for clock */
+MUX_CFG("MCBSP3_CLKX",		 9,    3,    1,	  1,  29,   0,	 NA,	 0,  1)
+
+/* Misc ballouts */
+MUX_CFG("BALLOUT_V8_ARMIO3",	 B,   18,    0,	  2,  25,   1,	 NA,	 0,  1)
+MUX_CFG("N20_HDQ",		 6,   18,    1,   1,   4,   0,    1,     4,  0)
+
+/* OMAP-1610 MMC2 */
+MUX_CFG("W8_1610_MMC2_DAT0",	 B,   21,    6,	  2,  23,   1,	  2,	 1,  1)
+MUX_CFG("V8_1610_MMC2_DAT1",	 B,   27,    6,	  2,  25,   1,	  2,	 1,  1)
+MUX_CFG("W15_1610_MMC2_DAT2",	 9,   12,    6,	  2,   5,   1,	  2,	 1,  1)
+MUX_CFG("R10_1610_MMC2_DAT3",	 B,   18,    6,	  2,  22,   1,	  2,	 1,  1)
+MUX_CFG("Y10_1610_MMC2_CLK",	 B,    3,    6,	  2,  17,   0,	  2,	 0,  1)
+MUX_CFG("Y8_1610_MMC2_CMD",	 B,   24,    6,	  2,  24,   1,	  2,	 1,  1)
+MUX_CFG("V9_1610_MMC2_CMDDIR",	 B,   12,    6,	  2,  20,   0,	  2,	 1,  1)
+MUX_CFG("V5_1610_MMC2_DATDIR0",	 B,   15,    6,	  2,  21,   0,	  2,	 1,  1)
+MUX_CFG("W19_1610_MMC2_DATDIR1", 8,   15,    6,	  1,  23,   0,	  1,	 1,  1)
+MUX_CFG("R18_1610_MMC2_CLKIN",	 7,    9,    6,	  1,  11,   0,	  1,	11,  1)
+
+/* OMAP-1610 External Trace Interface */
+MUX_CFG("M19_1610_ETM_PSTAT0",	 5,   27,    1,	  0,  29,   0,	  0,	 0,  1)
+MUX_CFG("L15_1610_ETM_PSTAT1",	 5,   24,    1,	  0,  28,   0,	  0,	 0,  1)
+MUX_CFG("L18_1610_ETM_PSTAT2",	 5,   21,    1,	  0,  27,   0,	  0,	 0,  1)
+MUX_CFG("L19_1610_ETM_D0",	 5,   18,    1,	  0,  26,   0,	  0,	 0,  1)
+MUX_CFG("J19_1610_ETM_D6",	 5,    0,    1,	  0,  20,   0,	  0,	 0,  1)
+MUX_CFG("J18_1610_ETM_D7",	 5,   27,    1,	  0,  19,   0,	  0,	 0,  1)
+
+/* OMAP16XX GPIO */
+MUX_CFG("P20_1610_GPIO4",	 6,   27,    0,	  1,   7,   0,	  1,	 1,  1)
+MUX_CFG("V9_1610_GPIO7",	 B,   12,    1,	  2,  20,   0,	  2,	 1,  1)
+MUX_CFG("W8_1610_GPIO9",	 B,   21,    0,	  2,  23,   0,	  2,	 1,  1)
+MUX_CFG("N20_1610_GPIO11",       6,   18,    0,   1,   4,   0,    1,     1,  1)
+MUX_CFG("N19_1610_GPIO13",	 6,   12,    0,	  1,   2,   0,	  1,	 1,  1)
+MUX_CFG("P10_1610_GPIO22",	 C,    0,    7,	  2,  26,   0,	  2,	 1,  1)
+MUX_CFG("V5_1610_GPIO24",	 B,   15,    7,	  2,  21,   0,	  2,	 1,  1)
+MUX_CFG("AA20_1610_GPIO_41",	 9,    9,    7,	  1,  31,   0,	  1,	 1,  1)
+MUX_CFG("W19_1610_GPIO48",	 8,   15,    7,   1,  23,   1,    1,     0,  1)
+MUX_CFG("M7_1610_GPIO62",	10,    0,    0,   4,  24,   0,    4,     0,  1)
+MUX_CFG("V14_16XX_GPIO37",	 9,   18,    7,	  2,   2,   0,	  2,	 2,  0)
+MUX_CFG("R9_16XX_GPIO18",	 C,   18,    7,   3,   0,   0,    3,     0,  0)
+MUX_CFG("L14_16XX_GPIO49",	 6,    3,    7,   0,  31,   0,    0,    31,  0)
+
+/* OMAP-1610 uWire */
+MUX_CFG("V19_1610_UWIRE_SCLK",	 8,    6,    0,	  1,  20,   0,	  1,	 1,  1)
+MUX_CFG("U18_1610_UWIRE_SDI",	 8,    0,    0,	  1,  18,   0,	  1,	 1,  1)
+MUX_CFG("W21_1610_UWIRE_SDO",	 8,    3,    0,	  1,  19,   0,	  1,	 1,  1)
+MUX_CFG("N14_1610_UWIRE_CS0",	 8,    9,    1,	  1,  21,   0,	  1,	 1,  1)
+MUX_CFG("P15_1610_UWIRE_CS3",	 8,   12,    1,	  1,  22,   0,	  1,	 1,  1)
+MUX_CFG("N15_1610_UWIRE_CS1",	 7,   18,    2,	  1,  14,   0,	 NA,	 0,  1)
+
+/* OMAP-1610 SPI */
+MUX_CFG("U19_1610_SPIF_SCK",	 7,    21,   6,	  1,  15,   0,	  1,	 1,  1)
+MUX_CFG("U18_1610_SPIF_DIN",	 8,    0,    6,	  1,  18,   1,	  1,	 0,  1)
+MUX_CFG("P20_1610_SPIF_DIN",	 6,    27,   4,   1,   7,   1,    1,     0,  1)
+MUX_CFG("W21_1610_SPIF_DOUT",	 8,    3,    6,	  1,  19,   0,	  1,	 0,  1)
+MUX_CFG("R18_1610_SPIF_DOUT",	 7,    9,    3,	  1,  11,   0,	  1,	 0,  1)
+MUX_CFG("N14_1610_SPIF_CS0",	 8,    9,    6,	  1,  21,   0,	  1,	 1,  1)
+MUX_CFG("N15_1610_SPIF_CS1",	 7,    18,   6,	  1,  14,   0,	  1,	 1,  1)
+MUX_CFG("T19_1610_SPIF_CS2",	 7,    15,   4,	  1,  13,   0,	  1,	 1,  1)
+MUX_CFG("P15_1610_SPIF_CS3",	 8,    12,   3,	  1,  22,   0,	  1,	 1,  1)
+
+/* OMAP-1610 Flash */
+MUX_CFG("L3_1610_FLASH_CS2B_OE",10,    6,    1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("M8_1610_FLASH_CS2B_WE",10,    3,    1,	 NA,   0,   0,	 NA,	 0,  1)
+
+/* First MMC interface, same on 1510, 1610 and 1710 */
+MUX_CFG("MMC_CMD",		 A,   27,    0,	  2,  15,   1,	  2,	 1,  1)
+MUX_CFG("MMC_DAT1",		 A,   24,    0,	  2,  14,   1,	  2,	 1,  1)
+MUX_CFG("MMC_DAT2",		 A,   18,    0,	  2,  12,   1,	  2,	 1,  1)
+MUX_CFG("MMC_DAT0",		 B,    0,    0,	  2,  16,   1,	  2,	 1,  1)
+MUX_CFG("MMC_CLK",		 A,   21,    0,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("MMC_DAT3",		10,   15,    0,	  3,   8,   1,	  3,	 1,  1)
+MUX_CFG("M15_1710_MMC_CLKI",	 6,   21,    2,   0,   0,   0,   NA,     0,  1)
+MUX_CFG("P19_1710_MMC_CMDDIR",	 6,   24,    6,   0,   0,   0,   NA,     0,  1)
+MUX_CFG("P20_1710_MMC_DATDIR0",	 6,   27,    5,   0,   0,   0,   NA,     0,  1)
+
+/* OMAP-1610 USB0 alternate configuration */
+MUX_CFG("W9_USB0_TXEN",		 B,   9,     5,	  2,  19,   0,	  2,	 0,  1)
+MUX_CFG("AA9_USB0_VP",		 B,   6,     5,	  2,  18,   0,	  2,	 0,  1)
+MUX_CFG("Y5_USB0_RCV",		 C,  21,     5,	  3,   1,   0,	  1,	 0,  1)
+MUX_CFG("R9_USB0_VM",		 C,  18,     5,	  3,   0,   0,	  3,	 0,  1)
+MUX_CFG("V6_USB0_TXD",		 C,  27,     5,	  3,   3,   0,	  3,	 0,  1)
+MUX_CFG("W5_USB0_SE0",		 C,  24,     5,	  3,   2,   0,	  3,	 0,  1)
+MUX_CFG("V9_USB0_SPEED",	 B,  12,     5,	  2,  20,   0,	  2,	 0,  1)
+MUX_CFG("Y10_USB0_SUSP",	 B,   3,     5,	  2,  17,   0,	  2,	 0,  1)
+
+/* USB2 interface */
+MUX_CFG("W9_USB2_TXEN",		 B,   9,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("AA9_USB2_VP",		 B,   6,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("Y5_USB2_RCV",		 C,  21,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("R9_USB2_VM",		 C,  18,     1,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("V6_USB2_TXD",		 C,  27,     2,	 NA,   0,   0,	 NA,	 0,  1)
+MUX_CFG("W5_USB2_SE0",		 C,  24,     2,	 NA,   0,   0,	 NA,	 0,  1)
+
+/* 16XX UART */
+MUX_CFG("R13_1610_UART1_TX",	 A,  12,     6,	  2,  10,   0,	  2,	10,  1)
+MUX_CFG("V14_16XX_UART1_RX",	 9,  18,     0,	  2,   2,   0,	  2,	 2,  1)
+MUX_CFG("R14_1610_UART1_CTS",	 9,  15,     0,	  2,   1,   0,	  2,	 1,  1)
+MUX_CFG("AA15_1610_UART1_RTS",	 9,  12,     1,	  2,   0,   0,	  2,	 0,  1)
+MUX_CFG("R9_16XX_UART2_RX",	 C,  18,     0,   3,   0,   0,    3,     0,  1)
+MUX_CFG("L14_16XX_UART3_RX",	 6,   3,     0,   0,  31,   0,    0,    31,  1)
+
+/* I2C interface */
+MUX_CFG("I2C_SCL",		 7,  24,     0,	 NA,   0,   0,	 NA,	 0,  0)
+MUX_CFG("I2C_SDA",		 7,  27,     0,	 NA,   0,   0,	 NA,	 0,  0)
+
+/* Keypad */
+MUX_CFG("F18_1610_KBC0",	 3,  15,     0,	  0,   5,   1,	  0,	 0,  0)
+MUX_CFG("D20_1610_KBC1",	 3,  12,     0,	  0,   4,   1,	  0,	 0,  0)
+MUX_CFG("D19_1610_KBC2",	 3,   9,     0,	  0,   3,   1,	  0,	 0,  0)
+MUX_CFG("E18_1610_KBC3",	 3,   6,     0,	  0,   2,   1,	  0,	 0,  0)
+MUX_CFG("C21_1610_KBC4",	 3,   3,     0,	  0,   1,   1,	  0,	 0,  0)
+MUX_CFG("G18_1610_KBR0",	 4,   0,     0,	  0,   10,  1,	  0,	 1,  0)
+MUX_CFG("F19_1610_KBR1",	 3,   27,    0,	  0,   9,   1,	  0,	 1,  0)
+MUX_CFG("H14_1610_KBR2",	 3,   24,    0,	  0,   8,   1,	  0,	 1,  0)
+MUX_CFG("E20_1610_KBR3",	 3,   21,    0,	  0,   7,   1,	  0,	 1,  0)
+MUX_CFG("E19_1610_KBR4",	 3,   18,    0,	  0,   6,   1,	  0,	 1,  0)
+MUX_CFG("N19_1610_KBR5",	 6,  12,     1,	  1,   2,   1,	  1,	 1,  0)
+
+/* Power management */
+MUX_CFG("T20_1610_LOW_PWR",	 7,   12,    1,	  NA,   0,   0,   NA,	 0,  0)
+
+/* MCLK Settings */
+MUX_CFG("V5_1710_MCLK_ON",	 B,   15,    0,	  NA,   0,   0,   NA,	 0,  0)
+MUX_CFG("V5_1710_MCLK_OFF",	 B,   15,    6,	  NA,   0,   0,   NA,	 0,  0)
+MUX_CFG("R10_1610_MCLK_ON",	 B,   18,    0,	  NA,  22,   0,	  NA,	 1,  0)
+MUX_CFG("R10_1610_MCLK_OFF",	 B,   18,    6,	  2,   22,   1,	  2,	 1,  1)
+
+/* CompactFlash controller, conflicts with MMC1 */
+MUX_CFG("P11_1610_CF_CD2",	 A,   27,    3,	  2,   15,   1,	  2,	 1,  1)
+MUX_CFG("R11_1610_CF_IOIS16",	 B,    0,    3,	  2,   16,   1,	  2,	 1,  1)
+MUX_CFG("V10_1610_CF_IREQ",	 A,   24,    3,	  2,   14,   0,	  2,	 0,  1)
+MUX_CFG("W10_1610_CF_RESET",	 A,   18,    3,	  2,   12,   1,	  2,	 1,  1)
+MUX_CFG("W11_1610_CF_CD1",	10,   15,    3,	  3,    8,   1,	  3,	 1,  1)
+
+/* parallel camera */
+MUX_CFG("J15_1610_CAM_LCLK",	 4,   24,    0,   0,  18,   1,    0,     0,  0)
+MUX_CFG("J18_1610_CAM_D7",	 4,   27,    0,   0,  19,   1,    0,     0,  0)
+MUX_CFG("J19_1610_CAM_D6",	 5,    0,    0,   0,  20,   1,    0,     0,  0)
+MUX_CFG("J14_1610_CAM_D5",	 5,    3,    0,   0,  21,   1,    0,     0,  0)
+MUX_CFG("K18_1610_CAM_D4",	 5,    6,    0,   0,  22,   1,    0,     0,  0)
+MUX_CFG("K19_1610_CAM_D3",	 5,    9,    0,   0,  23,   1,    0,     0,  0)
+MUX_CFG("K15_1610_CAM_D2",	 5,   12,    0,   0,  24,   1,    0,     0,  0)
+MUX_CFG("K14_1610_CAM_D1",	 5,   15,    0,   0,  25,   1,    0,     0,  0)
+MUX_CFG("L19_1610_CAM_D0",	 5,   18,    0,   0,  26,   1,    0,     0,  0)
+MUX_CFG("L18_1610_CAM_VS",	 5,   21,    0,   0,  27,   1,    0,     0,  0)
+MUX_CFG("L15_1610_CAM_HS",	 5,   24,    0,   0,  28,   1,    0,     0,  0)
+MUX_CFG("M19_1610_CAM_RSTZ",	 5,   27,    0,   0,  29,   0,    0,     0,  0)
+MUX_CFG("Y15_1610_CAM_OUTCLK",	 A,    0,    6,   2,   6,   0,    2,     0,  0)
+
+/* serial camera */
+MUX_CFG("H19_1610_CAM_EXCLK",	 4,   21,    0,   0,  17,   0,    0,     0,  0)
+	/* REVISIT 5912 spec sez CCP_* can't pullup or pulldown ... ? */
+MUX_CFG("Y12_1610_CCP_CLKP",	 8,   18,    6,   1,  24,   1,    1,     0,  0)
+MUX_CFG("W13_1610_CCP_CLKM",	 9,    0,    6,   1,  28,   1,    1,     0,  0)
+MUX_CFG("W14_1610_CCP_DATAP",	 9,   24,    6,   2,   4,   1,    2,     0,  0)
+MUX_CFG("Y14_1610_CCP_DATAM",	 9,   21,    6,   2,   3,   1,    2,     0,  0)
+};
+#define OMAP1XXX_PINS_SZ	ARRAY_SIZE(omap1xxx_pins)
+#else
+#define omap1xxx_pins		NULL
+#define OMAP1XXX_PINS_SZ	0
+#endif	/* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */
+
+static int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
+{
+	static DEFINE_SPINLOCK(mux_spin_lock);
+	unsigned long flags;
+	unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
+		pull_orig = 0, pull = 0;
+	unsigned int mask, warn = 0;
+
+	/* Check the mux register in question */
+	if (cfg->mux_reg) {
+		unsigned	tmp1, tmp2;
+
+		spin_lock_irqsave(&mux_spin_lock, flags);
+		reg_orig = omap_readl(cfg->mux_reg);
+
+		/* The mux registers always seem to be 3 bits long */
+		mask = (0x7 << cfg->mask_offset);
+		tmp1 = reg_orig & mask;
+		reg = reg_orig & ~mask;
+
+		tmp2 = (cfg->mask << cfg->mask_offset);
+		reg |= tmp2;
+
+		if (tmp1 != tmp2)
+			warn = 1;
+
+		omap_writel(reg, cfg->mux_reg);
+		spin_unlock_irqrestore(&mux_spin_lock, flags);
+	}
+
+	/* Check for pull up or pull down selection on 1610 */
+	if (!cpu_is_omap15xx()) {
+		if (cfg->pu_pd_reg && cfg->pull_val) {
+			spin_lock_irqsave(&mux_spin_lock, flags);
+			pu_pd_orig = omap_readl(cfg->pu_pd_reg);
+			mask = 1 << cfg->pull_bit;
+
+			if (cfg->pu_pd_val) {
+				if (!(pu_pd_orig & mask))
+					warn = 1;
+				/* Use pull up */
+				pu_pd = pu_pd_orig | mask;
+			} else {
+				if (pu_pd_orig & mask)
+					warn = 1;
+				/* Use pull down */
+				pu_pd = pu_pd_orig & ~mask;
+			}
+			omap_writel(pu_pd, cfg->pu_pd_reg);
+			spin_unlock_irqrestore(&mux_spin_lock, flags);
+		}
+	}
+
+	/* Check for an associated pull down register */
+	if (cfg->pull_reg) {
+		spin_lock_irqsave(&mux_spin_lock, flags);
+		pull_orig = omap_readl(cfg->pull_reg);
+		mask = 1 << cfg->pull_bit;
+
+		if (cfg->pull_val) {
+			if (pull_orig & mask)
+				warn = 1;
+			/* Low bit = pull enabled */
+			pull = pull_orig & ~mask;
+		} else {
+			if (!(pull_orig & mask))
+				warn = 1;
+			/* High bit = pull disabled */
+			pull = pull_orig | mask;
+		}
+
+		omap_writel(pull, cfg->pull_reg);
+		spin_unlock_irqrestore(&mux_spin_lock, flags);
+	}
+
+	if (warn) {
+#ifdef CONFIG_OMAP_MUX_WARNINGS
+		printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
+#endif
+	}
+
+#ifdef CONFIG_OMAP_MUX_DEBUG
+	if (cfg->debug || warn) {
+		printk("MUX: Setting register %s\n", cfg->name);
+		printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+		       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
+
+		if (!cpu_is_omap15xx()) {
+			if (cfg->pu_pd_reg && cfg->pull_val) {
+				printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+				       cfg->pu_pd_name, cfg->pu_pd_reg,
+				       pu_pd_orig, pu_pd);
+			}
+		}
+
+		if (cfg->pull_reg)
+			printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+			       cfg->pull_name, cfg->pull_reg, pull_orig, pull);
+	}
+#endif
+
+#ifdef CONFIG_OMAP_MUX_WARNINGS
+	return warn ? -ETXTBSY : 0;
+#else
+	return 0;
+#endif
+}
+
+static struct omap_mux_cfg *mux_cfg;
+
+int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
+{
+	if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
+			|| !arch_mux_cfg->cfg_reg) {
+		printk(KERN_ERR "Invalid pin table\n");
+		return -EINVAL;
+	}
+
+	mux_cfg = arch_mux_cfg;
+
+	return 0;
+}
+
+/*
+ * Sets the Omap MUX and PULL_DWN registers based on the table
+ */
+int __init_or_module omap_cfg_reg(const unsigned long index)
+{
+	struct pin_config *reg;
+
+	if (!cpu_class_is_omap1()) {
+		printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
+				index);
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	if (mux_cfg == NULL) {
+		printk(KERN_ERR "Pin mux table not initialized\n");
+		return -ENODEV;
+	}
+
+	if (index >= mux_cfg->size) {
+		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+		       index, mux_cfg->size);
+		dump_stack();
+		return -ENODEV;
+	}
+
+	reg = &mux_cfg->pins[index];
+
+	if (!mux_cfg->cfg_reg)
+		return -ENODEV;
+
+	return mux_cfg->cfg_reg(reg);
+}
+EXPORT_SYMBOL(omap_cfg_reg);
+
+int __init omap1_mux_init(void)
+{
+	if (cpu_is_omap7xx()) {
+		arch_mux_cfg.pins	= omap7xx_pins;
+		arch_mux_cfg.size	= OMAP7XX_PINS_SZ;
+		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
+	}
+
+	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
+		arch_mux_cfg.pins	= omap1xxx_pins;
+		arch_mux_cfg.size	= OMAP1XXX_PINS_SZ;
+		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
+	}
+
+	return omap_mux_register(&arch_mux_cfg);
+}
+
+#else
+#define omap_mux_init() do {} while(0)
+#define omap_cfg_reg(x)	do {} while(0)
+#endif	/* CONFIG_OMAP_MUX */
+
diff --git a/arch/arm/mach-omap1/ocpi.c b/arch/arm/mach-omap1/ocpi.c
new file mode 100644
index 000000000..44a3d19eb
--- /dev/null
+++ b/arch/arm/mach-omap1/ocpi.c
@@ -0,0 +1,111 @@
+/*
+ * linux/arch/arm/plat-omap/ocpi.c
+ *
+ * Minimal OCP bus support for omap16xx
+ *
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * Modified for clock framework by Paul Mundt <paul.mundt@nokia.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include "common.h"
+
+#define OCPI_BASE		0xfffec320
+#define OCPI_FAULT		(OCPI_BASE + 0x00)
+#define OCPI_CMD_FAULT		(OCPI_BASE + 0x04)
+#define OCPI_SINT0		(OCPI_BASE + 0x08)
+#define OCPI_TABORT		(OCPI_BASE + 0x0c)
+#define OCPI_SINT1		(OCPI_BASE + 0x10)
+#define OCPI_PROT		(OCPI_BASE + 0x14)
+#define OCPI_SEC		(OCPI_BASE + 0x18)
+
+/* USB OHCI OCPI access error registers */
+#define HOSTUEADDR	0xfffba0e0
+#define HOSTUESTATUS	0xfffba0e4
+
+static struct clk *ocpi_ck;
+
+/*
+ * Enables device access to OMAP buses via the OCPI bridge
+ */
+int ocpi_enable(void)
+{
+	unsigned int val;
+
+	if (!cpu_is_omap16xx())
+		return -ENODEV;
+
+	/* Enable access for OHCI in OCPI */
+	val = omap_readl(OCPI_PROT);
+	val &= ~0xff;
+	/* val &= (1 << 0);	 Allow access only to EMIFS */
+	omap_writel(val, OCPI_PROT);
+
+	val = omap_readl(OCPI_SEC);
+	val &= ~0xff;
+	omap_writel(val, OCPI_SEC);
+
+	return 0;
+}
+EXPORT_SYMBOL(ocpi_enable);
+
+static int __init omap_ocpi_init(void)
+{
+	if (!cpu_is_omap16xx())
+		return -ENODEV;
+
+	ocpi_ck = clk_get(NULL, "l3_ocpi_ck");
+	if (IS_ERR(ocpi_ck))
+		return PTR_ERR(ocpi_ck);
+
+	clk_enable(ocpi_ck);
+	ocpi_enable();
+	pr_info("OMAP OCPI interconnect driver loaded\n");
+
+	return 0;
+}
+
+static void __exit omap_ocpi_exit(void)
+{
+	/* REVISIT: Disable OCPI */
+
+	if (!cpu_is_omap16xx())
+		return;
+
+	clk_disable(ocpi_ck);
+	clk_put(ocpi_ck);
+}
+
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("OMAP OCPI bus controller module");
+MODULE_LICENSE("GPL");
+module_init(omap_ocpi_init);
+module_exit(omap_ocpi_exit);
diff --git a/arch/arm/mach-omap1/opp.h b/arch/arm/mach-omap1/opp.h
new file mode 100644
index 000000000..79a683864
--- /dev/null
+++ b/arch/arm/mach-omap1/opp.h
@@ -0,0 +1,29 @@
+/*
+ *  linux/arch/arm/mach-omap1/opp.h
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP1_OPP_H
+#define __ARCH_ARM_MACH_OMAP1_OPP_H
+
+#include <linux/types.h>
+
+struct mpu_rate {
+	unsigned long		rate;
+	unsigned long		xtal;
+	unsigned long		pll_rate;
+	__u16			ckctl_val;
+	__u16			dpllctl_val;
+	u32			flags;
+};
+
+extern struct mpu_rate omap1_rate_table[];
+
+#endif
diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c
new file mode 100644
index 000000000..8dcebe6d8
--- /dev/null
+++ b/arch/arm/mach-omap1/opp_data.c
@@ -0,0 +1,54 @@
+/*
+ *  linux/arch/arm/mach-omap1/opp_data.c
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "clock.h"
+#include "opp.h"
+
+/*-------------------------------------------------------------------------
+ * Omap1 MPU rate table
+ *-------------------------------------------------------------------------*/
+struct mpu_rate omap1_rate_table[] = {
+	/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
+	 * NOTE: Comment order here is different from bits in CKCTL value:
+	 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
+	 */
+	{ 216000000, 12000000, 216000000, 0x050d, 0x2910, /* 1/1/2/2/2/8 */
+			CK_1710 },
+	{ 195000000, 13000000, 195000000, 0x050e, 0x2790, /* 1/1/2/2/4/8 */
+			CK_7XX },
+	{ 192000000, 19200000, 192000000, 0x050f, 0x2510, /* 1/1/2/2/8/8 */
+			CK_16XX },
+	{ 192000000, 12000000, 192000000, 0x050f, 0x2810, /* 1/1/2/2/8/8 */
+			CK_16XX },
+	{  96000000, 12000000, 192000000, 0x055f, 0x2810, /* 2/2/2/2/8/8 */
+			CK_16XX },
+	{  48000000, 12000000, 192000000, 0x0baf, 0x2810, /* 4/4/4/8/8/8 */
+			CK_16XX },
+	{  24000000, 12000000, 192000000, 0x0fff, 0x2810, /* 8/8/8/8/8/8 */
+			CK_16XX },
+	{ 182000000, 13000000, 182000000, 0x050e, 0x2710, /* 1/1/2/2/4/8 */
+			CK_7XX },
+	{ 168000000, 12000000, 168000000, 0x010f, 0x2710, /* 1/1/1/2/8/8 */
+			CK_16XX|CK_7XX },
+	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0, /* 1/1/1/2/4/4 */
+			CK_1510 },
+	{ 120000000, 12000000, 120000000, 0x010a, 0x2510, /* 1/1/1/2/4/4 */
+			CK_16XX|CK_1510|CK_310|CK_7XX },
+	{  96000000, 12000000,  96000000, 0x0005, 0x2410, /* 1/1/1/1/2/2 */
+			CK_16XX|CK_1510|CK_310|CK_7XX },
+	{  60000000, 12000000,  60000000, 0x0005, 0x2290, /* 1/1/1/1/2/2 */
+			CK_16XX|CK_1510|CK_310|CK_7XX },
+	{  30000000, 12000000,  60000000, 0x0555, 0x2290, /* 2/2/2/2/2/2 */
+			CK_16XX|CK_1510|CK_310|CK_7XX },
+	{ 0, 0, 0, 0, 0 },
+};
+
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
new file mode 100644
index 000000000..dd94567c3
--- /dev/null
+++ b/arch/arm/mach-omap1/pm.c
@@ -0,0 +1,708 @@
+/*
+ * linux/arch/arm/mach-omap1/pm.c
+ *
+ * OMAP Power Management Routines
+ *
+ * Original code for the SA11x0:
+ * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
+ *
+ * Modified for the PXA250 by Nicolas Pitre:
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ *
+ * Modified for the OMAP1510 by David Singleton:
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ *
+ * Cleanup 2004 for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/suspend.h>
+#include <linux/sched.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/atomic.h>
+#include <linux/cpu.h>
+
+#include <asm/fncpy.h>
+#include <asm/system_misc.h>
+#include <asm/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+
+#include <mach/tc.h>
+#include <mach/mux.h>
+#include <linux/omap-dma.h>
+#include <plat/dmtimer.h>
+
+#include <mach/irqs.h>
+
+#include "iomap.h"
+#include "clock.h"
+#include "pm.h"
+#include "sram.h"
+
+static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
+static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
+static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
+static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
+static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
+static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
+
+static unsigned short enable_dyn_sleep;
+
+static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr,
+			 char *buf)
+{
+	return sprintf(buf, "%hu\n", enable_dyn_sleep);
+}
+
+static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr,
+			  const char * buf, size_t n)
+{
+	unsigned short value;
+	if (sscanf(buf, "%hu", &value) != 1 ||
+	    (value != 0 && value != 1) ||
+	    (value != 0 && !IS_ENABLED(CONFIG_OMAP_32K_TIMER))) {
+		pr_err("idle_sleep_store: Invalid value\n");
+		return -EINVAL;
+	}
+	enable_dyn_sleep = value;
+	return n;
+}
+
+static struct kobj_attribute sleep_while_idle_attr =
+	__ATTR(sleep_while_idle, 0644, idle_show, idle_store);
+
+
+static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
+
+/*
+ * Let's power down on idle, but only if we are really
+ * idle, because once we start down the path of
+ * going idle we continue to do idle even if we get
+ * a clock tick interrupt . .
+ */
+void omap1_pm_idle(void)
+{
+	extern __u32 arm_idlect1_mask;
+	__u32 use_idlect1 = arm_idlect1_mask;
+
+	local_fiq_disable();
+
+#if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
+	use_idlect1 = use_idlect1 & ~(1 << 9);
+#endif
+
+#ifdef CONFIG_OMAP_DM_TIMER
+	use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1);
+#endif
+
+	if (omap_dma_running())
+		use_idlect1 &= ~(1 << 6);
+
+	/*
+	 * We should be able to remove the do_sleep variable and multiple
+	 * tests above as soon as drivers, timer and DMA code have been fixed.
+	 * Even the sleep block count should become obsolete.
+	 */
+	if ((use_idlect1 != ~0) || !enable_dyn_sleep) {
+
+		__u32 saved_idlect1 = omap_readl(ARM_IDLECT1);
+		if (cpu_is_omap15xx())
+			use_idlect1 &= OMAP1510_BIG_SLEEP_REQUEST;
+		else
+			use_idlect1 &= OMAP1610_IDLECT1_SLEEP_VAL;
+		omap_writel(use_idlect1, ARM_IDLECT1);
+		__asm__ volatile ("mcr	p15, 0, r0, c7, c0, 4");
+		omap_writel(saved_idlect1, ARM_IDLECT1);
+
+		local_fiq_enable();
+		return;
+	}
+	omap_sram_suspend(omap_readl(ARM_IDLECT1),
+			  omap_readl(ARM_IDLECT2));
+
+	local_fiq_enable();
+}
+
+/*
+ * Configuration of the wakeup event is board specific. For the
+ * moment we put it into this helper function. Later it may move
+ * to board specific files.
+ */
+static void omap_pm_wakeup_setup(void)
+{
+	u32 level1_wake = 0;
+	u32 level2_wake = OMAP_IRQ_BIT(INT_UART2);
+
+	/*
+	 * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade,
+	 * and the L2 wakeup interrupts: keypad and UART2. Note that the
+	 * drivers must still separately call omap_set_gpio_wakeup() to
+	 * wake up to a GPIO interrupt.
+	 */
+	if (cpu_is_omap7xx())
+		level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) |
+			OMAP_IRQ_BIT(INT_7XX_IH2_IRQ);
+	else if (cpu_is_omap15xx())
+		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
+			OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
+	else if (cpu_is_omap16xx())
+		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
+			OMAP_IRQ_BIT(INT_1610_IH2_IRQ);
+
+	omap_writel(~level1_wake, OMAP_IH1_MIR);
+
+	if (cpu_is_omap7xx()) {
+		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
+		omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) |
+				OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)),
+				OMAP_IH2_1_MIR);
+	} else if (cpu_is_omap15xx()) {
+		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
+		omap_writel(~level2_wake,  OMAP_IH2_MIR);
+	} else if (cpu_is_omap16xx()) {
+		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
+		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
+
+		/* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
+		omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ),
+			    OMAP_IH2_1_MIR);
+		omap_writel(~0x0, OMAP_IH2_2_MIR);
+		omap_writel(~0x0, OMAP_IH2_3_MIR);
+	}
+
+	/*  New IRQ agreement, recalculate in cascade order */
+	omap_writel(1, OMAP_IH2_CONTROL);
+	omap_writel(1, OMAP_IH1_CONTROL);
+}
+
+#define EN_DSPCK	13	/* ARM_CKCTL */
+#define EN_APICK	6	/* ARM_IDLECT2 */
+#define DSP_EN		1	/* ARM_RSTCT1 */
+
+void omap1_pm_suspend(void)
+{
+	unsigned long arg0 = 0, arg1 = 0;
+
+	printk(KERN_INFO "PM: OMAP%x is trying to enter deep sleep...\n",
+		omap_rev());
+
+	omap_serial_wake_trigger(1);
+
+	if (!cpu_is_omap15xx())
+		omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
+
+	/*
+	 * Step 1: turn off interrupts (FIXME: NOTE: already disabled)
+	 */
+
+	local_irq_disable();
+	local_fiq_disable();
+
+	/*
+	 * Step 2: save registers
+	 *
+	 * The omap is a strange/beautiful device. The caches, memory
+	 * and register state are preserved across power saves.
+	 * We have to save and restore very little register state to
+	 * idle the omap.
+         *
+	 * Save interrupt, MPUI, ARM and UPLD control registers.
+	 */
+
+	if (cpu_is_omap7xx()) {
+		MPUI7XX_SAVE(OMAP_IH1_MIR);
+		MPUI7XX_SAVE(OMAP_IH2_0_MIR);
+		MPUI7XX_SAVE(OMAP_IH2_1_MIR);
+		MPUI7XX_SAVE(MPUI_CTRL);
+		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI7XX_SAVE(EMIFS_CONFIG);
+		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
+
+	} else if (cpu_is_omap15xx()) {
+		MPUI1510_SAVE(OMAP_IH1_MIR);
+		MPUI1510_SAVE(OMAP_IH2_MIR);
+		MPUI1510_SAVE(MPUI_CTRL);
+		MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI1510_SAVE(EMIFS_CONFIG);
+		MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
+	} else if (cpu_is_omap16xx()) {
+		MPUI1610_SAVE(OMAP_IH1_MIR);
+		MPUI1610_SAVE(OMAP_IH2_0_MIR);
+		MPUI1610_SAVE(OMAP_IH2_1_MIR);
+		MPUI1610_SAVE(OMAP_IH2_2_MIR);
+		MPUI1610_SAVE(OMAP_IH2_3_MIR);
+		MPUI1610_SAVE(MPUI_CTRL);
+		MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI1610_SAVE(EMIFS_CONFIG);
+		MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
+	}
+
+	ARM_SAVE(ARM_CKCTL);
+	ARM_SAVE(ARM_IDLECT1);
+	ARM_SAVE(ARM_IDLECT2);
+	if (!(cpu_is_omap15xx()))
+		ARM_SAVE(ARM_IDLECT3);
+	ARM_SAVE(ARM_EWUPCT);
+	ARM_SAVE(ARM_RSTCT1);
+	ARM_SAVE(ARM_RSTCT2);
+	ARM_SAVE(ARM_SYSST);
+	ULPD_SAVE(ULPD_CLOCK_CTRL);
+	ULPD_SAVE(ULPD_STATUS_REQ);
+
+	/* (Step 3 removed - we now allow deep sleep by default) */
+
+	/*
+	 * Step 4: OMAP DSP Shutdown
+	 */
+
+	/* stop DSP */
+	omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
+
+		/* shut down dsp_ck */
+	if (!cpu_is_omap7xx())
+		omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
+
+	/* temporarily enabling api_ck to access DSP registers */
+	omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
+
+	/* save DSP registers */
+	DSP_SAVE(DSP_IDLECT2);
+
+	/* Stop all DSP domain clocks */
+	__raw_writew(0, DSP_IDLECT2);
+
+	/*
+	 * Step 5: Wakeup Event Setup
+	 */
+
+	omap_pm_wakeup_setup();
+
+	/*
+	 * Step 6: ARM and Traffic controller shutdown
+	 */
+
+	/* disable ARM watchdog */
+	omap_writel(0x00F5, OMAP_WDT_TIMER_MODE);
+	omap_writel(0x00A0, OMAP_WDT_TIMER_MODE);
+
+	/*
+	 * Step 6b: ARM and Traffic controller shutdown
+	 *
+	 * Step 6 continues here. Prepare jump to power management
+	 * assembly code in internal SRAM.
+	 *
+	 * Since the omap_cpu_suspend routine has been copied to
+	 * SRAM, we'll do an indirect procedure call to it and pass the
+	 * contents of arm_idlect1 and arm_idlect2 so it can restore
+	 * them when it wakes up and it will return.
+	 */
+
+	arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1];
+	arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2];
+
+	/*
+	 * Step 6c: ARM and Traffic controller shutdown
+	 *
+	 * Jump to assembly code. The processor will stay there
+	 * until wake up.
+	 */
+	omap_sram_suspend(arg0, arg1);
+
+	/*
+	 * If we are here, processor is woken up!
+	 */
+
+	/*
+	 * Restore DSP clocks
+	 */
+
+	/* again temporarily enabling api_ck to access DSP registers */
+	omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);
+
+	/* Restore DSP domain clocks */
+	DSP_RESTORE(DSP_IDLECT2);
+
+	/*
+	 * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did
+	 */
+
+	if (!(cpu_is_omap15xx()))
+		ARM_RESTORE(ARM_IDLECT3);
+	ARM_RESTORE(ARM_CKCTL);
+	ARM_RESTORE(ARM_EWUPCT);
+	ARM_RESTORE(ARM_RSTCT1);
+	ARM_RESTORE(ARM_RSTCT2);
+	ARM_RESTORE(ARM_SYSST);
+	ULPD_RESTORE(ULPD_CLOCK_CTRL);
+	ULPD_RESTORE(ULPD_STATUS_REQ);
+
+	if (cpu_is_omap7xx()) {
+		MPUI7XX_RESTORE(EMIFS_CONFIG);
+		MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG);
+		MPUI7XX_RESTORE(OMAP_IH1_MIR);
+		MPUI7XX_RESTORE(OMAP_IH2_0_MIR);
+		MPUI7XX_RESTORE(OMAP_IH2_1_MIR);
+	} else if (cpu_is_omap15xx()) {
+		MPUI1510_RESTORE(MPUI_CTRL);
+		MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
+		MPUI1510_RESTORE(MPUI_DSP_API_CONFIG);
+		MPUI1510_RESTORE(EMIFS_CONFIG);
+		MPUI1510_RESTORE(EMIFF_SDRAM_CONFIG);
+		MPUI1510_RESTORE(OMAP_IH1_MIR);
+		MPUI1510_RESTORE(OMAP_IH2_MIR);
+	} else if (cpu_is_omap16xx()) {
+		MPUI1610_RESTORE(MPUI_CTRL);
+		MPUI1610_RESTORE(MPUI_DSP_BOOT_CONFIG);
+		MPUI1610_RESTORE(MPUI_DSP_API_CONFIG);
+		MPUI1610_RESTORE(EMIFS_CONFIG);
+		MPUI1610_RESTORE(EMIFF_SDRAM_CONFIG);
+
+		MPUI1610_RESTORE(OMAP_IH1_MIR);
+		MPUI1610_RESTORE(OMAP_IH2_0_MIR);
+		MPUI1610_RESTORE(OMAP_IH2_1_MIR);
+		MPUI1610_RESTORE(OMAP_IH2_2_MIR);
+		MPUI1610_RESTORE(OMAP_IH2_3_MIR);
+	}
+
+	if (!cpu_is_omap15xx())
+		omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
+
+	/*
+	 * Re-enable interrupts
+	 */
+
+	local_irq_enable();
+	local_fiq_enable();
+
+	omap_serial_wake_trigger(0);
+
+	printk(KERN_INFO "PM: OMAP%x is re-starting from deep sleep...\n",
+		omap_rev());
+}
+
+#ifdef CONFIG_DEBUG_FS
+/*
+ * Read system PM registers for debugging
+ */
+static int omap_pm_debug_show(struct seq_file *m, void *v)
+{
+	ARM_SAVE(ARM_CKCTL);
+	ARM_SAVE(ARM_IDLECT1);
+	ARM_SAVE(ARM_IDLECT2);
+	if (!(cpu_is_omap15xx()))
+		ARM_SAVE(ARM_IDLECT3);
+	ARM_SAVE(ARM_EWUPCT);
+	ARM_SAVE(ARM_RSTCT1);
+	ARM_SAVE(ARM_RSTCT2);
+	ARM_SAVE(ARM_SYSST);
+
+	ULPD_SAVE(ULPD_IT_STATUS);
+	ULPD_SAVE(ULPD_CLOCK_CTRL);
+	ULPD_SAVE(ULPD_SOFT_REQ);
+	ULPD_SAVE(ULPD_STATUS_REQ);
+	ULPD_SAVE(ULPD_DPLL_CTRL);
+	ULPD_SAVE(ULPD_POWER_CTRL);
+
+	if (cpu_is_omap7xx()) {
+		MPUI7XX_SAVE(MPUI_CTRL);
+		MPUI7XX_SAVE(MPUI_DSP_STATUS);
+		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
+		MPUI7XX_SAVE(EMIFS_CONFIG);
+	} else if (cpu_is_omap15xx()) {
+		MPUI1510_SAVE(MPUI_CTRL);
+		MPUI1510_SAVE(MPUI_DSP_STATUS);
+		MPUI1510_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI1510_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI1510_SAVE(EMIFF_SDRAM_CONFIG);
+		MPUI1510_SAVE(EMIFS_CONFIG);
+	} else if (cpu_is_omap16xx()) {
+		MPUI1610_SAVE(MPUI_CTRL);
+		MPUI1610_SAVE(MPUI_DSP_STATUS);
+		MPUI1610_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI1610_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI1610_SAVE(EMIFF_SDRAM_CONFIG);
+		MPUI1610_SAVE(EMIFS_CONFIG);
+	}
+
+	seq_printf(m,
+		   "ARM_CKCTL_REG:            0x%-8x     \n"
+		   "ARM_IDLECT1_REG:          0x%-8x     \n"
+		   "ARM_IDLECT2_REG:          0x%-8x     \n"
+		   "ARM_IDLECT3_REG:	      0x%-8x     \n"
+		   "ARM_EWUPCT_REG:           0x%-8x     \n"
+		   "ARM_RSTCT1_REG:           0x%-8x     \n"
+		   "ARM_RSTCT2_REG:           0x%-8x     \n"
+		   "ARM_SYSST_REG:            0x%-8x     \n"
+		   "ULPD_IT_STATUS_REG:       0x%-4x     \n"
+		   "ULPD_CLOCK_CTRL_REG:      0x%-4x     \n"
+		   "ULPD_SOFT_REQ_REG:        0x%-4x     \n"
+		   "ULPD_DPLL_CTRL_REG:       0x%-4x     \n"
+		   "ULPD_STATUS_REQ_REG:      0x%-4x     \n"
+		   "ULPD_POWER_CTRL_REG:      0x%-4x     \n",
+		   ARM_SHOW(ARM_CKCTL),
+		   ARM_SHOW(ARM_IDLECT1),
+		   ARM_SHOW(ARM_IDLECT2),
+		   ARM_SHOW(ARM_IDLECT3),
+		   ARM_SHOW(ARM_EWUPCT),
+		   ARM_SHOW(ARM_RSTCT1),
+		   ARM_SHOW(ARM_RSTCT2),
+		   ARM_SHOW(ARM_SYSST),
+		   ULPD_SHOW(ULPD_IT_STATUS),
+		   ULPD_SHOW(ULPD_CLOCK_CTRL),
+		   ULPD_SHOW(ULPD_SOFT_REQ),
+		   ULPD_SHOW(ULPD_DPLL_CTRL),
+		   ULPD_SHOW(ULPD_STATUS_REQ),
+		   ULPD_SHOW(ULPD_POWER_CTRL));
+
+	if (cpu_is_omap7xx()) {
+		seq_printf(m,
+			   "MPUI7XX_CTRL_REG	     0x%-8x \n"
+			   "MPUI7XX_DSP_STATUS_REG:      0x%-8x \n"
+			   "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+			   "MPUI7XX_DSP_API_CONFIG_REG:  0x%-8x \n"
+			   "MPUI7XX_SDRAM_CONFIG_REG:    0x%-8x \n"
+			   "MPUI7XX_EMIFS_CONFIG_REG:    0x%-8x \n",
+			   MPUI7XX_SHOW(MPUI_CTRL),
+			   MPUI7XX_SHOW(MPUI_DSP_STATUS),
+			   MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG),
+			   MPUI7XX_SHOW(MPUI_DSP_API_CONFIG),
+			   MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG),
+			   MPUI7XX_SHOW(EMIFS_CONFIG));
+	} else if (cpu_is_omap15xx()) {
+		seq_printf(m,
+			   "MPUI1510_CTRL_REG             0x%-8x \n"
+			   "MPUI1510_DSP_STATUS_REG:      0x%-8x \n"
+			   "MPUI1510_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+			   "MPUI1510_DSP_API_CONFIG_REG:  0x%-8x \n"
+			   "MPUI1510_SDRAM_CONFIG_REG:    0x%-8x \n"
+			   "MPUI1510_EMIFS_CONFIG_REG:    0x%-8x \n",
+			   MPUI1510_SHOW(MPUI_CTRL),
+			   MPUI1510_SHOW(MPUI_DSP_STATUS),
+			   MPUI1510_SHOW(MPUI_DSP_BOOT_CONFIG),
+			   MPUI1510_SHOW(MPUI_DSP_API_CONFIG),
+			   MPUI1510_SHOW(EMIFF_SDRAM_CONFIG),
+			   MPUI1510_SHOW(EMIFS_CONFIG));
+	} else if (cpu_is_omap16xx()) {
+		seq_printf(m,
+			   "MPUI1610_CTRL_REG             0x%-8x \n"
+			   "MPUI1610_DSP_STATUS_REG:      0x%-8x \n"
+			   "MPUI1610_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+			   "MPUI1610_DSP_API_CONFIG_REG:  0x%-8x \n"
+			   "MPUI1610_SDRAM_CONFIG_REG:    0x%-8x \n"
+			   "MPUI1610_EMIFS_CONFIG_REG:    0x%-8x \n",
+			   MPUI1610_SHOW(MPUI_CTRL),
+			   MPUI1610_SHOW(MPUI_DSP_STATUS),
+			   MPUI1610_SHOW(MPUI_DSP_BOOT_CONFIG),
+			   MPUI1610_SHOW(MPUI_DSP_API_CONFIG),
+			   MPUI1610_SHOW(EMIFF_SDRAM_CONFIG),
+			   MPUI1610_SHOW(EMIFS_CONFIG));
+	}
+
+	return 0;
+}
+
+static int omap_pm_debug_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, omap_pm_debug_show,
+				&inode->i_private);
+}
+
+static const struct file_operations omap_pm_debug_fops = {
+	.open		= omap_pm_debug_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void omap_pm_init_debugfs(void)
+{
+	struct dentry *d;
+
+	d = debugfs_create_dir("pm_debug", NULL);
+	if (!d)
+		return;
+
+	(void) debugfs_create_file("omap_pm", S_IWUSR | S_IRUGO,
+					d, NULL, &omap_pm_debug_fops);
+}
+
+#endif /* CONFIG_DEBUG_FS */
+
+/*
+ *	omap_pm_prepare - Do preliminary suspend work.
+ *
+ */
+static int omap_pm_prepare(void)
+{
+	/* We cannot sleep in idle until we have resumed */
+	cpu_idle_poll_ctrl(true);
+	return 0;
+}
+
+
+/*
+ *	omap_pm_enter - Actually enter a sleep state.
+ *	@state:		State we're entering.
+ *
+ */
+
+static int omap_pm_enter(suspend_state_t state)
+{
+	switch (state)
+	{
+	case PM_SUSPEND_STANDBY:
+	case PM_SUSPEND_MEM:
+		omap1_pm_suspend();
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+/**
+ *	omap_pm_finish - Finish up suspend sequence.
+ *
+ *	This is called after we wake back up (or if entering the sleep state
+ *	failed).
+ */
+
+static void omap_pm_finish(void)
+{
+	cpu_idle_poll_ctrl(false);
+}
+
+
+static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
+{
+	return IRQ_HANDLED;
+}
+
+static struct irqaction omap_wakeup_irq = {
+	.name		= "peripheral wakeup",
+	.handler	= omap_wakeup_interrupt
+};
+
+
+
+static const struct platform_suspend_ops omap_pm_ops = {
+	.prepare	= omap_pm_prepare,
+	.enter		= omap_pm_enter,
+	.finish		= omap_pm_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+static int __init omap_pm_init(void)
+{
+	int error = 0;
+
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
+	pr_info("Power Management for TI OMAP.\n");
+
+	if (!IS_ENABLED(CONFIG_OMAP_32K_TIMER))
+		pr_info("OMAP1 PM: sleep states in idle disabled due to no 32KiHz timer\n");
+
+	if (!IS_ENABLED(CONFIG_OMAP_DM_TIMER))
+		pr_info("OMAP1 PM: sleep states in idle disabled due to no DMTIMER support\n");
+
+	if (IS_ENABLED(CONFIG_OMAP_32K_TIMER) &&
+	    IS_ENABLED(CONFIG_OMAP_DM_TIMER)) {
+		/* OMAP16xx only */
+		pr_info("OMAP1 PM: sleep states in idle enabled\n");
+		enable_dyn_sleep = 1;
+	}
+
+	/*
+	 * We copy the assembler sleep/wakeup routines to SRAM.
+	 * These routines need to be in SRAM as that's the only
+	 * memory the MPU can see when it wakes up.
+	 */
+	if (cpu_is_omap7xx()) {
+		omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend,
+						   omap7xx_cpu_suspend_sz);
+	} else if (cpu_is_omap15xx()) {
+		omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
+						   omap1510_cpu_suspend_sz);
+	} else if (cpu_is_omap16xx()) {
+		omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend,
+						   omap1610_cpu_suspend_sz);
+	}
+
+	if (omap_sram_suspend == NULL) {
+		printk(KERN_ERR "PM not initialized: Missing SRAM support\n");
+		return -ENODEV;
+	}
+
+	arm_pm_idle = omap1_pm_idle;
+
+	if (cpu_is_omap7xx())
+		setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
+	else if (cpu_is_omap16xx())
+		setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+
+	/* Program new power ramp-up time
+	 * (0 for most boards since we don't lower voltage when in deep sleep)
+	 */
+	omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3);
+
+	/* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */
+	omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
+
+	/* Configure IDLECT3 */
+	if (cpu_is_omap7xx())
+		omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3);
+	else if (cpu_is_omap16xx())
+		omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
+
+	suspend_set_ops(&omap_pm_ops);
+
+#ifdef CONFIG_DEBUG_FS
+	omap_pm_init_debugfs();
+#endif
+
+	error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr);
+	if (error)
+		printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
+
+	if (cpu_is_omap16xx()) {
+		/* configure LOW_PWR pin */
+		omap_cfg_reg(T20_1610_LOW_PWR);
+	}
+
+	return error;
+}
+__initcall(omap_pm_init);
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
new file mode 100644
index 000000000..cd926dcb5
--- /dev/null
+++ b/arch/arm/mach-omap1/pm.h
@@ -0,0 +1,281 @@
+/*
+ * arch/arm/mach-omap1/pm.h
+ *
+ * Header file for OMAP1 Power Management Routines
+ *
+ * Author: MontaVista Software, Inc.
+ *	   support@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP1_PM_H
+#define __ARCH_ARM_MACH_OMAP1_PM_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Register and offset definitions to be used in PM assembler code
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_ASM_BASE		OMAP1_IO_ADDRESS(0xfffece00)
+#define ARM_IDLECT1_ASM_OFFSET		0x04
+#define ARM_IDLECT2_ASM_OFFSET		0x08
+
+#define TCMIF_ASM_BASE			OMAP1_IO_ADDRESS(0xfffecc00)
+#define EMIFS_CONFIG_ASM_OFFSET		0x0c
+#define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
+
+/*
+ * ----------------------------------------------------------------------------
+ * Power management bitmasks
+ * ----------------------------------------------------------------------------
+ */
+#define IDLE_WAIT_CYCLES		0x00000fff
+#define PERIPHERAL_ENABLE		0x2
+
+#define SELF_REFRESH_MODE		0x0c000001
+#define IDLE_EMIFS_REQUEST		0xc
+#define MODEM_32K_EN			0x1
+#define PER_EN				0x1
+
+#define CPU_SUSPEND_SIZE		200
+#define ULPD_LOW_PWR_EN			0x0001
+#define ULPD_DEEP_SLEEP_TRANSITION_EN	0x0010
+#define ULPD_SETUP_ANALOG_CELL_3_VAL	0
+#define ULPD_POWER_CTRL_REG_VAL		0x0219
+
+#define DSP_IDLE_DELAY			10
+#define DSP_IDLE			0x0040
+#define DSP_RST				0x0004
+#define DSP_ENABLE			0x0002
+#define SUFFICIENT_DSP_RESET_TIME	1000
+#define DEFAULT_MPUI_CONFIG		0x05cf
+#define ENABLE_XORCLK			0x2
+#define DSP_CLOCK_ENABLE		0x2000
+#define DSP_IDLE_MODE			0x2
+#define TC_IDLE_REQUEST			(0x0000000c)
+
+#define IRQ_LEVEL2			(1<<0)
+#define IRQ_KEYBOARD			(1<<1)
+#define IRQ_UART2			(1<<15)
+
+#define PDE_BIT				0x08
+#define PWD_EN_BIT			0x04
+#define EN_PERCK_BIT			0x04
+
+#define OMAP1510_DEEP_SLEEP_REQUEST	0x0ec7
+#define OMAP1510_BIG_SLEEP_REQUEST	0x0cc5
+#define OMAP1510_IDLE_LOOP_REQUEST	0x0c00
+#define OMAP1510_IDLE_CLOCK_DOMAINS	0x2
+
+/* Both big sleep and deep sleep use same values. Difference is in ULPD. */
+#define OMAP1610_IDLECT1_SLEEP_VAL	0x13c7
+#define OMAP1610_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP1610_IDLECT3_VAL		0x3f
+#define OMAP1610_IDLECT3_SLEEP_ORMASK	0x2c
+#define OMAP1610_IDLECT3		0xfffece24
+#define OMAP1610_IDLE_LOOP_REQUEST	0x0400
+
+#define OMAP7XX_IDLECT1_SLEEP_VAL	0x16c7
+#define OMAP7XX_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP7XX_IDLECT3_VAL		0x3f
+#define OMAP7XX_IDLECT3		0xfffece24
+#define OMAP7XX_IDLE_LOOP_REQUEST	0x0C00
+
+#if     !defined(CONFIG_ARCH_OMAP730) && \
+	!defined(CONFIG_ARCH_OMAP850) && \
+	!defined(CONFIG_ARCH_OMAP15XX) && \
+	!defined(CONFIG_ARCH_OMAP16XX)
+#warning "Power management for this processor not implemented yet"
+#endif
+
+#ifndef __ASSEMBLER__
+
+#include <linux/clk.h>
+
+extern struct kset power_subsys;
+
+extern void prevent_idle_sleep(void);
+extern void allow_idle_sleep(void);
+
+extern void omap1_pm_idle(void);
+extern void omap1_pm_suspend(void);
+
+extern void omap7xx_cpu_suspend(unsigned long, unsigned long);
+extern void omap1510_cpu_suspend(unsigned long, unsigned long);
+extern void omap1610_cpu_suspend(unsigned long, unsigned long);
+extern void omap7xx_idle_loop_suspend(void);
+extern void omap1510_idle_loop_suspend(void);
+extern void omap1610_idle_loop_suspend(void);
+
+extern unsigned int omap7xx_cpu_suspend_sz;
+extern unsigned int omap1510_cpu_suspend_sz;
+extern unsigned int omap1610_cpu_suspend_sz;
+extern unsigned int omap7xx_idle_loop_suspend_sz;
+extern unsigned int omap1510_idle_loop_suspend_sz;
+extern unsigned int omap1610_idle_loop_suspend_sz;
+
+#ifdef CONFIG_OMAP_SERIAL_WAKE
+extern void omap_serial_wake_trigger(int enable);
+#else
+#define omap_serial_wakeup_init()	{}
+#define omap_serial_wake_trigger(x)	{}
+#endif	/* CONFIG_OMAP_SERIAL_WAKE */
+
+#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
+#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
+#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
+
+#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x)
+#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x))
+#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x]
+
+#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
+#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
+#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
+
+#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x))
+#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]
+
+#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
+#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
+
+#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
+#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
+
+/*
+ * List of global OMAP registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+ * with the stack pointer in sleep.S.
+ */
+
+enum arm_save_state {
+	ARM_SLEEP_SAVE_START = 0,
+	/*
+	 * MPU control registers 32 bits
+	 */
+	ARM_SLEEP_SAVE_ARM_CKCTL,
+	ARM_SLEEP_SAVE_ARM_IDLECT1,
+	ARM_SLEEP_SAVE_ARM_IDLECT2,
+	ARM_SLEEP_SAVE_ARM_IDLECT3,
+	ARM_SLEEP_SAVE_ARM_EWUPCT,
+	ARM_SLEEP_SAVE_ARM_RSTCT1,
+	ARM_SLEEP_SAVE_ARM_RSTCT2,
+	ARM_SLEEP_SAVE_ARM_SYSST,
+	ARM_SLEEP_SAVE_SIZE
+};
+
+enum dsp_save_state {
+	DSP_SLEEP_SAVE_START = 0,
+	/*
+	 * DSP registers 16 bits
+	 */
+	DSP_SLEEP_SAVE_DSP_IDLECT2,
+	DSP_SLEEP_SAVE_SIZE
+};
+
+enum ulpd_save_state {
+	ULPD_SLEEP_SAVE_START = 0,
+	/*
+	 * ULPD registers 16 bits
+	 */
+	ULPD_SLEEP_SAVE_ULPD_IT_STATUS,
+	ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL,
+	ULPD_SLEEP_SAVE_ULPD_SOFT_REQ,
+	ULPD_SLEEP_SAVE_ULPD_STATUS_REQ,
+	ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL,
+	ULPD_SLEEP_SAVE_ULPD_POWER_CTRL,
+	ULPD_SLEEP_SAVE_SIZE
+};
+
+enum mpui1510_save_state {
+	MPUI1510_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI1510_SLEEP_SAVE_MPUI_CTRL,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
+#if defined(CONFIG_ARCH_OMAP15XX)
+	MPUI1510_SLEEP_SAVE_SIZE
+#else
+	MPUI1510_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum mpui7xx_save_state {
+	MPUI7XX_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI7XX_SLEEP_SAVE_MPUI_CTRL,
+	MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR,
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	MPUI7XX_SLEEP_SAVE_SIZE
+#else
+	MPUI7XX_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum mpui1610_save_state {
+	MPUI1610_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI1610_SLEEP_SAVE_MPUI_CTRL,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI1610_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR,
+#if defined(CONFIG_ARCH_OMAP16XX)
+	MPUI1610_SLEEP_SAVE_SIZE
+#else
+	MPUI1610_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+#endif /* ASSEMBLER */
+#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
new file mode 100644
index 000000000..c40e209de
--- /dev/null
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -0,0 +1,79 @@
+/*
+ * Runtime PM support code for OMAP1
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_clock.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include "soc.h"
+
+#ifdef CONFIG_PM
+static int omap1_pm_runtime_suspend(struct device *dev)
+{
+	int ret;
+
+	dev_dbg(dev, "%s\n", __func__);
+
+	ret = pm_generic_runtime_suspend(dev);
+	if (ret)
+		return ret;
+
+	ret = pm_clk_suspend(dev);
+	if (ret) {
+		pm_generic_runtime_resume(dev);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int omap1_pm_runtime_resume(struct device *dev)
+{
+	dev_dbg(dev, "%s\n", __func__);
+
+	pm_clk_resume(dev);
+	return pm_generic_runtime_resume(dev);
+}
+
+static struct dev_pm_domain default_pm_domain = {
+	.ops = {
+		.runtime_suspend = omap1_pm_runtime_suspend,
+		.runtime_resume = omap1_pm_runtime_resume,
+		USE_PLATFORM_PM_SLEEP_OPS
+	},
+};
+#define OMAP1_PM_DOMAIN (&default_pm_domain)
+#else
+#define OMAP1_PM_DOMAIN NULL
+#endif /* CONFIG_PM */
+
+static struct pm_clk_notifier_block platform_bus_notifier = {
+	.pm_domain = OMAP1_PM_DOMAIN,
+	.con_ids = { "ick", "fck", NULL, },
+};
+
+static int __init omap1_pm_runtime_init(void)
+{
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
+	pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
+
+	return 0;
+}
+core_initcall(omap1_pm_runtime_init);
+
diff --git a/arch/arm/mach-omap1/reset.c b/arch/arm/mach-omap1/reset.c
new file mode 100644
index 000000000..72bf4bf4a
--- /dev/null
+++ b/arch/arm/mach-omap1/reset.c
@@ -0,0 +1,63 @@
+/*
+ * OMAP1 reset support
+ */
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+
+/* ARM_SYSST bit shifts related to SoC reset sources */
+#define ARM_SYSST_POR_SHIFT				5
+#define ARM_SYSST_EXT_RST_SHIFT				4
+#define ARM_SYSST_ARM_WDRST_SHIFT			2
+#define ARM_SYSST_GLOB_SWRST_SHIFT			1
+
+/* Standardized reset source bits (across all OMAP SoCs) */
+#define OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT		0
+#define OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT		1
+#define OMAP_MPU_WD_RST_SRC_ID_SHIFT			3
+#define OMAP_EXTWARM_RST_SRC_ID_SHIFT			5
+
+
+void omap1_restart(enum reboot_mode mode, const char *cmd)
+{
+	/*
+	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
+	 * "Global Software Reset Affects Traffic Controller Frequency".
+	 */
+	if (cpu_is_omap5912()) {
+		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
+		omap_writew(0x8, ARM_RSTCT1);
+	}
+
+	omap_writew(1, ARM_RSTCT1);
+}
+
+/**
+ * omap1_get_reset_sources - return the source of the SoC's last reset
+ *
+ * Returns bits that represent the last reset source for the SoC.  The
+ * format is standardized across OMAPs for use by the OMAP watchdog.
+ */
+u32 omap1_get_reset_sources(void)
+{
+	u32 ret = 0;
+	u16 rs;
+
+	rs = __raw_readw(OMAP1_IO_ADDRESS(ARM_SYSST));
+
+	if (rs & (1 << ARM_SYSST_POR_SHIFT))
+		ret |= 1 << OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT;
+	if (rs & (1 << ARM_SYSST_EXT_RST_SHIFT))
+		ret |= 1 << OMAP_EXTWARM_RST_SRC_ID_SHIFT;
+	if (rs & (1 << ARM_SYSST_ARM_WDRST_SHIFT))
+		ret |= 1 << OMAP_MPU_WD_RST_SRC_ID_SHIFT;
+	if (rs & (1 << ARM_SYSST_GLOB_SWRST_SHIFT))
+		ret |= 1 << OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT;
+
+	return ret;
+}
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
new file mode 100644
index 000000000..d1ac08016
--- /dev/null
+++ b/arch/arm/mach-omap1/serial.c
@@ -0,0 +1,262 @@
+/*
+ * linux/arch/arm/mach-omap1/serial.c
+ *
+ * OMAP1 serial support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include <mach/mux.h>
+
+#include "pm.h"
+
+static struct clk * uart1_ck;
+static struct clk * uart2_ck;
+static struct clk * uart3_ck;
+
+static inline unsigned int omap_serial_in(struct plat_serial8250_port *up,
+					  int offset)
+{
+	offset <<= up->regshift;
+	return (unsigned int)__raw_readb(up->membase + offset);
+}
+
+static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset,
+				    int value)
+{
+	offset <<= p->regshift;
+	__raw_writeb(value, p->membase + offset);
+}
+
+/*
+ * Internal UARTs need to be initialized for the 8250 autoconfig to work
+ * properly. Note that the TX watermark initialization may not be needed
+ * once the 8250.c watermark handling code is merged.
+ */
+static void __init omap_serial_reset(struct plat_serial8250_port *p)
+{
+	omap_serial_outp(p, UART_OMAP_MDR1,
+			UART_OMAP_MDR1_DISABLE);	/* disable UART */
+	omap_serial_outp(p, UART_OMAP_SCR, 0x08);	/* TX watermark */
+	omap_serial_outp(p, UART_OMAP_MDR1,
+			UART_OMAP_MDR1_16X_MODE);	/* enable UART */
+
+	if (!cpu_is_omap15xx()) {
+		omap_serial_outp(p, UART_OMAP_SYSC, 0x01);
+		while (!(omap_serial_in(p, UART_OMAP_SYSC) & 0x01));
+	}
+}
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase	= OMAP1_UART1_BASE,
+		.irq		= INT_UART1,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+	},
+	{
+		.mapbase	= OMAP1_UART2_BASE,
+		.irq		= INT_UART2,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+	},
+	{
+		.mapbase	= OMAP1_UART3_BASE,
+		.irq		= INT_UART3,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP16XX_BASE_BAUD * 16,
+	},
+	{ },
+};
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+/*
+ * Note that on Innovator-1510 UART2 pins conflict with USB2.
+ * By default UART2 does not work on Innovator-1510 if you have
+ * USB OHCI enabled. To use UART2, you must disable USB2 first.
+ */
+void __init omap_serial_init(void)
+{
+	int i;
+
+	if (cpu_is_omap7xx()) {
+		serial_platform_data[0].regshift = 0;
+		serial_platform_data[1].regshift = 0;
+		serial_platform_data[0].irq = INT_7XX_UART_MODEM_1;
+		serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2;
+	}
+
+	if (cpu_is_omap15xx()) {
+		serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
+		serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
+		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) {
+
+		/* Don't look at UARTs higher than 2 for omap7xx */
+		if (cpu_is_omap7xx() && i > 1) {
+			serial_platform_data[i].membase = NULL;
+			serial_platform_data[i].mapbase = 0;
+			continue;
+		}
+
+		/* Static mapping, never released */
+		serial_platform_data[i].membase =
+			ioremap(serial_platform_data[i].mapbase, SZ_2K);
+		if (!serial_platform_data[i].membase) {
+			printk(KERN_ERR "Could not ioremap uart%i\n", i);
+			continue;
+		}
+		switch (i) {
+		case 0:
+			uart1_ck = clk_get(NULL, "uart1_ck");
+			if (IS_ERR(uart1_ck))
+				printk("Could not get uart1_ck\n");
+			else {
+				clk_enable(uart1_ck);
+				if (cpu_is_omap15xx())
+					clk_set_rate(uart1_ck, 12000000);
+			}
+			break;
+		case 1:
+			uart2_ck = clk_get(NULL, "uart2_ck");
+			if (IS_ERR(uart2_ck))
+				printk("Could not get uart2_ck\n");
+			else {
+				clk_enable(uart2_ck);
+				if (cpu_is_omap15xx())
+					clk_set_rate(uart2_ck, 12000000);
+				else
+					clk_set_rate(uart2_ck, 48000000);
+			}
+			break;
+		case 2:
+			uart3_ck = clk_get(NULL, "uart3_ck");
+			if (IS_ERR(uart3_ck))
+				printk("Could not get uart3_ck\n");
+			else {
+				clk_enable(uart3_ck);
+				if (cpu_is_omap15xx())
+					clk_set_rate(uart3_ck, 12000000);
+			}
+			break;
+		}
+		omap_serial_reset(&serial_platform_data[i]);
+	}
+}
+
+#ifdef CONFIG_OMAP_SERIAL_WAKE
+
+static irqreturn_t omap_serial_wake_interrupt(int irq, void *dev_id)
+{
+	/* Need to do something with serial port right after wake-up? */
+	return IRQ_HANDLED;
+}
+
+/*
+ * Reroutes serial RX lines to GPIO lines for the duration of
+ * sleep to allow waking up the device from serial port even
+ * in deep sleep.
+ */
+void omap_serial_wake_trigger(int enable)
+{
+	if (!cpu_is_omap16xx())
+		return;
+
+	if (uart1_ck != NULL) {
+		if (enable)
+			omap_cfg_reg(V14_16XX_GPIO37);
+		else
+			omap_cfg_reg(V14_16XX_UART1_RX);
+	}
+	if (uart2_ck != NULL) {
+		if (enable)
+			omap_cfg_reg(R9_16XX_GPIO18);
+		else
+			omap_cfg_reg(R9_16XX_UART2_RX);
+	}
+	if (uart3_ck != NULL) {
+		if (enable)
+			omap_cfg_reg(L14_16XX_GPIO49);
+		else
+			omap_cfg_reg(L14_16XX_UART3_RX);
+	}
+}
+
+static void __init omap_serial_set_port_wakeup(int gpio_nr)
+{
+	int ret;
+
+	ret = gpio_request(gpio_nr, "UART wake");
+	if (ret < 0) {
+		printk(KERN_ERR "Could not request UART wake GPIO: %i\n",
+		       gpio_nr);
+		return;
+	}
+	gpio_direction_input(gpio_nr);
+	ret = request_irq(gpio_to_irq(gpio_nr), &omap_serial_wake_interrupt,
+			  IRQF_TRIGGER_RISING, "serial wakeup", NULL);
+	if (ret) {
+		gpio_free(gpio_nr);
+		printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n",
+		       gpio_nr);
+		return;
+	}
+	enable_irq_wake(gpio_to_irq(gpio_nr));
+}
+
+int __init omap_serial_wakeup_init(void)
+{
+	if (!cpu_is_omap16xx())
+		return 0;
+
+	if (uart1_ck != NULL)
+		omap_serial_set_port_wakeup(37);
+	if (uart2_ck != NULL)
+		omap_serial_set_port_wakeup(18);
+	if (uart3_ck != NULL)
+		omap_serial_set_port_wakeup(49);
+
+	return 0;
+}
+
+#endif	/* CONFIG_OMAP_SERIAL_WAKE */
+
+static int __init omap_init(void)
+{
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
+	return platform_device_register(&serial_device);
+}
+arch_initcall(omap_init);
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
new file mode 100644
index 000000000..a908c5183
--- /dev/null
+++ b/arch/arm/mach-omap1/sleep.S
@@ -0,0 +1,370 @@
+/*
+ * linux/arch/arm/mach-omap1/sleep.S
+ *
+ * Low-level OMAP7XX/1510/1610 sleep/wakeUp support
+ *
+ * Initial SA1110 code:
+ * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
+ *
+ * Adapted for PXA by Nicolas Pitre:
+ * Copyright (c) 2002 Monta Vista Software, Inc.
+ *
+ * Support for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "pm.h"
+
+		.text
+
+
+/*
+ * Forces OMAP into deep sleep state
+ *
+ * omapXXXX_cpu_suspend()
+ *
+ * The values of the registers ARM_IDLECT1 and ARM_IDLECT2 are passed
+ * as arg0 and arg1 from caller. arg0 is stored in register r0 and arg1
+ * in register r1.
+ *
+ * Note: This code get's copied to internal SRAM at boot. When the OMAP
+ *	 wakes up it continues execution at the point it went to sleep.
+ *
+ * Note: Because of errata work arounds we have processor specific functions
+ *       here. They are mostly the same, but slightly different.
+ *
+ */
+
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	.align	3
+ENTRY(omap7xx_cpu_suspend)
+
+	@ save registers on stack
+	stmfd	sp!, {r0 - r12, lr}
+
+	@ Drain write cache
+	mov	r4, #0
+	mcr	p15, 0, r0, c7, c10, 4
+	nop
+
+	@ load base address of Traffic Controller
+	mov	r6, #TCMIF_ASM_BASE & 0xff000000
+	orr	r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
+	orr	r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
+
+	@ prepare to put SDRAM into self-refresh manually
+	ldr	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+	orr	r9, r7, #SELF_REFRESH_MODE & 0xff000000
+	orr	r9, r9, #SELF_REFRESH_MODE & 0x000000ff
+	str	r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+
+	@ prepare to put EMIFS to Sleep
+	ldr	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+	orr	r9, r8, #IDLE_EMIFS_REQUEST & 0xff
+	str	r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+
+	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
+	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
+	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
+	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
+
+	@ turn off clock domains
+	@ do not disable PERCK (0x04)
+	mov	r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff
+	orr	r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00
+	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+
+	@ request ARM idle
+	mov	r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff
+	orr	r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00
+	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+	@ disable instruction cache
+	mrc	p15, 0, r9, c1, c0, 0
+	bic	r2, r9, #0x1000
+	mcr	p15, 0, r2, c1, c0, 0
+	nop
+
+/*
+ * Let's wait for the next wake up event to wake us up. r0 can't be
+ * used here because r0 holds ARM_IDLECT1
+ */
+	mov	r2, #0
+	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
+/*
+ * omap7xx_cpu_suspend()'s resume point.
+ *
+ * It will just start executing here, so we'll restore stuff from the
+ * stack.
+ */
+	@ re-enable Icache
+	mcr	p15, 0, r9, c1, c0, 0
+
+	@ reset the ARM_IDLECT1 and ARM_IDLECT2.
+	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+	@ Restore EMIFF controls
+	str	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+	str	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+
+	@ restore regs and return
+	ldmfd	sp!, {r0 - r12, pc}
+
+ENTRY(omap7xx_cpu_suspend_sz)
+	.word	. - omap7xx_cpu_suspend
+#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
+
+#ifdef CONFIG_ARCH_OMAP15XX
+	.align	3
+ENTRY(omap1510_cpu_suspend)
+
+	@ save registers on stack
+	stmfd	sp!, {r0 - r12, lr}
+
+	@ load base address of Traffic Controller
+	mov	r4, #TCMIF_ASM_BASE & 0xff000000
+	orr	r4, r4, #TCMIF_ASM_BASE & 0x00ff0000
+	orr	r4, r4, #TCMIF_ASM_BASE & 0x0000ff00
+
+	@ work around errata of OMAP1510 PDE bit for TC shut down
+	@ clear PDE bit
+	ldr	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+	bic	r5, r5, #PDE_BIT & 0xff
+	str	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+
+	@ set PWD_EN bit
+	and	r5, r5, #PWD_EN_BIT & 0xff
+	str	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+
+	@ prepare to put SDRAM into self-refresh manually
+	ldr	r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+	orr	r5, r5, #SELF_REFRESH_MODE & 0xff000000
+	orr	r5, r5, #SELF_REFRESH_MODE & 0x000000ff
+	str	r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+
+	@ prepare to put EMIFS to Sleep
+	ldr	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+	orr	r5, r5, #IDLE_EMIFS_REQUEST & 0xff
+	str	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+
+	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
+	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
+	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
+	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
+
+	@ turn off clock domains
+	mov	r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff
+	orr	r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00
+	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+
+	@ request ARM idle
+	mov	r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff
+	orr	r3, r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff00
+	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+	mov	r5, #IDLE_WAIT_CYCLES & 0xff
+	orr	r5, r5, #IDLE_WAIT_CYCLES & 0xff00
+l_1510_2:
+	subs	r5, r5, #1
+	bne	l_1510_2
+/*
+ * Let's wait for the next wake up event to wake us up. r0 can't be
+ * used here because r0 holds ARM_IDLECT1
+ */
+	mov	r2, #0
+	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
+/*
+ * omap1510_cpu_suspend()'s resume point.
+ *
+ * It will just start executing here, so we'll restore stuff from the
+ * stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
+ */
+	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+	@ restore regs and return
+	ldmfd	sp!, {r0 - r12, pc}
+
+ENTRY(omap1510_cpu_suspend_sz)
+	.word	. - omap1510_cpu_suspend
+#endif /* CONFIG_ARCH_OMAP15XX */
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+	.align	3
+ENTRY(omap1610_cpu_suspend)
+
+	@ save registers on stack
+	stmfd	sp!, {r0 - r12, lr}
+
+	@ Drain write cache
+	mov	r4, #0
+	mcr	p15, 0, r0, c7, c10, 4
+	nop
+
+	@ Load base address of Traffic Controller
+	mov	r6, #TCMIF_ASM_BASE & 0xff000000
+	orr	r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
+	orr	r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
+
+	@ Prepare to put SDRAM into self-refresh manually
+	ldr	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+	orr	r9, r7, #SELF_REFRESH_MODE & 0xff000000
+	orr	r9, r9, #SELF_REFRESH_MODE & 0x000000ff
+	str	r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+
+	@ Prepare to put EMIFS to Sleep
+	ldr	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+	orr	r9, r8, #IDLE_EMIFS_REQUEST & 0xff
+	str	r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+
+	@ Load base address of ARM_IDLECT1 and ARM_IDLECT2
+	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
+	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000
+	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
+
+	@ Turn off clock domains
+	@ Do not disable PERCK (0x04)
+	mov	r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff
+	orr	r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00
+	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+
+	@ Request ARM idle
+	mov	r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff
+	orr	r3, r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff00
+	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+/*
+ * Let's wait for the next wake up event to wake us up. r0 can't be
+ * used here because r0 holds ARM_IDLECT1
+ */
+	mov	r2, #0
+	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
+
+	@ Errata (HEL3SU467, section 1.4.4) specifies nop-instructions
+	@ according to this formula:
+	@ 2 + (4*DPLL_MULT)/DPLL_DIV/ARMDIV
+	@ Max DPLL_MULT = 18
+	@ DPLL_DIV = 1
+	@ ARMDIV = 1
+	@ => 74 nop-instructions
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop	@10
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop	@20
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop	@30
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop	@40
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop	@50
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop	@60
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop	@70
+	nop
+	nop
+	nop
+	nop	@74
+/*
+ * omap1610_cpu_suspend()'s resume point.
+ *
+ * It will just start executing here, so we'll restore stuff from the
+ * stack.
+ */
+	@ Restore the ARM_IDLECT1 and ARM_IDLECT2.
+	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
+	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
+
+	@ Restore EMIFF controls
+	str	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+	str	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+
+	@ Restore regs and return
+	ldmfd	sp!, {r0 - r12, pc}
+
+ENTRY(omap1610_cpu_suspend_sz)
+	.word	. - omap1610_cpu_suspend
+#endif /* CONFIG_ARCH_OMAP16XX */
diff --git a/arch/arm/mach-omap1/soc.h b/arch/arm/mach-omap1/soc.h
new file mode 100644
index 000000000..69daf0187
--- /dev/null
+++ b/arch/arm/mach-omap1/soc.h
@@ -0,0 +1,4 @@
+/*
+ * We can move mach/soc.h here once the drivers are fixed
+ */
+#include <mach/soc.h>
diff --git a/arch/arm/mach-omap1/sram-init.c b/arch/arm/mach-omap1/sram-init.c
new file mode 100644
index 000000000..6431b0f86
--- /dev/null
+++ b/arch/arm/mach-omap1/sram-init.c
@@ -0,0 +1,76 @@
+/*
+ * OMAP SRAM detection and management
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/fncpy.h>
+#include <asm/tlb.h>
+#include <asm/cacheflush.h>
+
+#include <asm/mach/map.h>
+
+#include "soc.h"
+#include "sram.h"
+
+#define OMAP1_SRAM_PA		0x20000000
+#define SRAM_BOOTLOADER_SZ	0x80
+
+/*
+ * The amount of SRAM depends on the core type.
+ * Note that we cannot try to test for SRAM here because writes
+ * to secure SRAM will hang the system. Also the SRAM is not
+ * yet mapped at this point.
+ */
+static void __init omap_detect_and_map_sram(void)
+{
+	unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ;
+	unsigned long omap_sram_start = OMAP1_SRAM_PA;
+	unsigned long omap_sram_size;
+
+	if (cpu_is_omap7xx())
+		omap_sram_size = 0x32000;	/* 200K */
+	else if (cpu_is_omap15xx())
+		omap_sram_size = 0x30000;	/* 192K */
+	else if (cpu_is_omap1610() || cpu_is_omap1611() ||
+			cpu_is_omap1621() || cpu_is_omap1710())
+		omap_sram_size = 0x4000;	/* 16K */
+	else {
+		pr_err("Could not detect SRAM size\n");
+		omap_sram_size = 0x4000;
+	}
+
+	omap_map_sram(omap_sram_start, omap_sram_size,
+		omap_sram_skip, 1);
+}
+
+static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
+
+void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
+{
+	BUG_ON(!_omap_sram_reprogram_clock);
+	/* On 730, bit 13 must always be 1 */
+	if (cpu_is_omap7xx())
+		ckctl |= 0x2000;
+	_omap_sram_reprogram_clock(dpllctl, ckctl);
+}
+
+int __init omap_sram_init(void)
+{
+	omap_detect_and_map_sram();
+	_omap_sram_reprogram_clock =
+			omap_sram_push(omap1_sram_reprogram_clock,
+					omap1_sram_reprogram_clock_sz);
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
new file mode 100644
index 000000000..00e9d9e9a
--- /dev/null
+++ b/arch/arm/mach-omap1/sram.S
@@ -0,0 +1,61 @@
+/*
+ * linux/arch/arm/plat-omap/sram-fn.S
+ *
+ * Functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+
+#include <mach/hardware.h>
+
+#include "iomap.h"
+
+	.text
+
+/*
+ * Reprograms ULPD and CKCTL.
+ */
+	.align	3
+ENTRY(omap1_sram_reprogram_clock)
+	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
+
+	mov	r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0xff000000
+	orr	r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x00ff0000
+	orr	r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x0000ff00
+
+	mov	r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0xff000000
+	orr	r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
+	orr	r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
+
+	tst	r0, #1 << 4			@ want lock mode?
+	beq	newck				@ nope
+	bic	r0, r0, #1 << 4			@ else clear lock bit
+	strh	r0, [r2]			@ set dpll into bypass mode
+	orr	r0, r0, #1 << 4			@ set lock bit again
+
+newck:
+	strh	r1, [r3]			@ write new ckctl value
+	strh	r0, [r2]			@ write new dpll value
+
+	mov	r4, #0x0700			@ let the clocks settle
+	orr	r4, r4, #0x00ff
+delay:	sub	r4, r4, #1
+	cmp	r4, #0
+	bne	delay
+
+lock:	ldrh	r4, [r2], #0			@ read back dpll value
+	tst	r0, #1 << 4			@ want lock mode?
+	beq	out				@ nope
+	tst	r4, #1 << 0			@ dpll rate locked?
+	beq	lock				@ try again
+
+out:
+	ldmfd	sp!, {r0 - r12, pc}		@ restore regs and return
+ENTRY(omap1_sram_reprogram_clock_sz)
+	.word	. - omap1_sram_reprogram_clock
diff --git a/arch/arm/mach-omap1/sram.h b/arch/arm/mach-omap1/sram.h
new file mode 100644
index 000000000..d5a6c8362
--- /dev/null
+++ b/arch/arm/mach-omap1/sram.h
@@ -0,0 +1,7 @@
+#include <plat/sram.h>
+
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+/* Do not use these */
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
new file mode 100644
index 000000000..a7588cfd0
--- /dev/null
+++ b/arch/arm/mach-omap1/time.c
@@ -0,0 +1,236 @@
+/*
+ * linux/arch/arm/mach-omap1/time.c
+ *
+ * OMAP Timers
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Partial timer rewrite and additional dynamic tick timer support by
+ * Tony Lindgen <tony@atomide.com> and
+ * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ * MPU timer code based on the older MPU timer code for OMAP
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+#include <linux/sched_clock.h>
+
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#include "iomap.h"
+#include "common.h"
+
+#ifdef CONFIG_OMAP_MPU_TIMER
+
+#define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
+#define OMAP_MPU_TIMER_OFFSET		0x100
+
+typedef struct {
+	u32 cntl;			/* CNTL_TIMER, R/W */
+	u32 load_tim;			/* LOAD_TIM,   W */
+	u32 read_tim;			/* READ_TIM,   R */
+} omap_mpu_timer_regs_t;
+
+#define omap_mpu_timer_base(n)							\
+((omap_mpu_timer_regs_t __iomem *)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+				 (n)*OMAP_MPU_TIMER_OFFSET))
+
+static inline unsigned long notrace omap_mpu_timer_read(int nr)
+{
+	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+	return readl(&timer->read_tim);
+}
+
+static inline void omap_mpu_set_autoreset(int nr)
+{
+	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+
+	writel(readl(&timer->cntl) | MPU_TIMER_AR, &timer->cntl);
+}
+
+static inline void omap_mpu_remove_autoreset(int nr)
+{
+	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+
+	writel(readl(&timer->cntl) & ~MPU_TIMER_AR, &timer->cntl);
+}
+
+static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
+					int autoreset)
+{
+	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+	unsigned int timerflags = MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST;
+
+	if (autoreset)
+		timerflags |= MPU_TIMER_AR;
+
+	writel(MPU_TIMER_CLOCK_ENABLE, &timer->cntl);
+	udelay(1);
+	writel(load_val, &timer->load_tim);
+        udelay(1);
+	writel(timerflags, &timer->cntl);
+}
+
+static inline void omap_mpu_timer_stop(int nr)
+{
+	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(nr);
+
+	writel(readl(&timer->cntl) & ~MPU_TIMER_ST, &timer->cntl);
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * MPU timer 1 ... count down to zero, interrupt, reload
+ * ---------------------------------------------------------------------------
+ */
+static int omap_mpu_set_next_event(unsigned long cycles,
+				   struct clock_event_device *evt)
+{
+	omap_mpu_timer_start(0, cycles, 0);
+	return 0;
+}
+
+static void omap_mpu_set_mode(enum clock_event_mode mode,
+			      struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		omap_mpu_set_autoreset(0);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		omap_mpu_timer_stop(0);
+		omap_mpu_remove_autoreset(0);
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device clockevent_mpu_timer1 = {
+	.name		= "mpu_timer1",
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event	= omap_mpu_set_next_event,
+	.set_mode	= omap_mpu_set_mode,
+};
+
+static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &clockevent_mpu_timer1;
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction omap_mpu_timer1_irq = {
+	.name		= "mpu_timer1",
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= omap_mpu_timer1_interrupt,
+};
+
+static __init void omap_init_mpu_timer(unsigned long rate)
+{
+	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
+	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
+
+	clockevent_mpu_timer1.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&clockevent_mpu_timer1, rate,
+					1, -1);
+}
+
+
+/*
+ * ---------------------------------------------------------------------------
+ * MPU timer 2 ... free running 32-bit clock source and scheduler clock
+ * ---------------------------------------------------------------------------
+ */
+
+static u64 notrace omap_mpu_read_sched_clock(void)
+{
+	return ~omap_mpu_timer_read(1);
+}
+
+static void __init omap_init_clocksource(unsigned long rate)
+{
+	omap_mpu_timer_regs_t __iomem *timer = omap_mpu_timer_base(1);
+	static char err[] __initdata = KERN_ERR
+			"%s: can't register clocksource!\n";
+
+	omap_mpu_timer_start(1, ~0, 1);
+	sched_clock_register(omap_mpu_read_sched_clock, 32, rate);
+
+	if (clocksource_mmio_init(&timer->read_tim, "mpu_timer2", rate,
+			300, 32, clocksource_mmio_readl_down))
+		printk(err, "mpu_timer2");
+}
+
+static void __init omap_mpu_timer_init(void)
+{
+	struct clk	*ck_ref = clk_get(NULL, "ck_ref");
+	unsigned long	rate;
+
+	BUG_ON(IS_ERR(ck_ref));
+
+	rate = clk_get_rate(ck_ref);
+	clk_put(ck_ref);
+
+	/* PTV = 0 */
+	rate /= 2;
+
+	omap_init_mpu_timer(rate);
+	omap_init_clocksource(rate);
+}
+
+#else
+static inline void omap_mpu_timer_init(void)
+{
+	pr_err("Bogus timer, should not happen\n");
+}
+#endif	/* CONFIG_OMAP_MPU_TIMER */
+
+/*
+ * ---------------------------------------------------------------------------
+ * Timer initialization
+ * ---------------------------------------------------------------------------
+ */
+void __init omap1_timer_init(void)
+{
+	if (omap_32k_timer_init() != 0)
+		omap_mpu_timer_init();
+}
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
new file mode 100644
index 000000000..bde7a35e5
--- /dev/null
+++ b/arch/arm/mach-omap1/timer.c
@@ -0,0 +1,174 @@
+/**
+ * OMAP1 Dual-Mode Timers - platform device registration
+ *
+ * Contains first level initialization routines which internally
+ * generates timer device information and registers with linux
+ * device model. It also has low level function to chnage the timer
+ * input clock source.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/dmtimer-omap.h>
+
+#include <mach/irqs.h>
+
+#include <plat/dmtimer.h>
+
+#define OMAP1610_GPTIMER1_BASE		0xfffb1400
+#define OMAP1610_GPTIMER2_BASE		0xfffb1c00
+#define OMAP1610_GPTIMER3_BASE		0xfffb2400
+#define OMAP1610_GPTIMER4_BASE		0xfffb2c00
+#define OMAP1610_GPTIMER5_BASE		0xfffb3400
+#define OMAP1610_GPTIMER6_BASE		0xfffb3c00
+#define OMAP1610_GPTIMER7_BASE		0xfffb7400
+#define OMAP1610_GPTIMER8_BASE		0xfffbd400
+
+#define OMAP1_DM_TIMER_COUNT		8
+
+static int omap1_dm_timer_set_src(struct platform_device *pdev,
+				int source)
+{
+	int n = (pdev->id - 1) << 1;
+	u32 l;
+
+	l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+	l |= source << n;
+	omap_writel(l, MOD_CONF_CTRL_1);
+
+	return 0;
+}
+
+static int __init omap1_dm_timer_init(void)
+{
+	int i;
+	int ret;
+	struct dmtimer_platform_data *pdata;
+	struct platform_device *pdev;
+
+	if (!cpu_is_omap16xx())
+		return 0;
+
+	for (i = 1; i <= OMAP1_DM_TIMER_COUNT; i++) {
+		struct resource res[2];
+		u32 base, irq;
+
+		switch (i) {
+		case 1:
+			base = OMAP1610_GPTIMER1_BASE;
+			irq = INT_1610_GPTIMER1;
+			break;
+		case 2:
+			base = OMAP1610_GPTIMER2_BASE;
+			irq = INT_1610_GPTIMER2;
+			break;
+		case 3:
+			base = OMAP1610_GPTIMER3_BASE;
+			irq = INT_1610_GPTIMER3;
+			break;
+		case 4:
+			base = OMAP1610_GPTIMER4_BASE;
+			irq = INT_1610_GPTIMER4;
+			break;
+		case 5:
+			base = OMAP1610_GPTIMER5_BASE;
+			irq = INT_1610_GPTIMER5;
+			break;
+		case 6:
+			base = OMAP1610_GPTIMER6_BASE;
+			irq = INT_1610_GPTIMER6;
+			break;
+		case 7:
+			base = OMAP1610_GPTIMER7_BASE;
+			irq = INT_1610_GPTIMER7;
+			break;
+		case 8:
+			base = OMAP1610_GPTIMER8_BASE;
+			irq = INT_1610_GPTIMER8;
+			break;
+		default:
+			/*
+			 * not supposed to reach here.
+			 * this is to remove warning.
+			 */
+			return -EINVAL;
+		}
+
+		pdev = platform_device_alloc("omap_timer", i);
+		if (!pdev) {
+			pr_err("%s: Failed to device alloc for dmtimer%d\n",
+				__func__, i);
+			return -ENOMEM;
+		}
+
+		memset(res, 0, 2 * sizeof(struct resource));
+		res[0].start = base;
+		res[0].end = base + 0x46;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = irq;
+		res[1].end = irq;
+		res[1].flags = IORESOURCE_IRQ;
+		ret = platform_device_add_resources(pdev, res,
+				ARRAY_SIZE(res));
+		if (ret) {
+			dev_err(&pdev->dev, "%s: Failed to add resources.\n",
+				__func__);
+			goto err_free_pdev;
+		}
+
+		pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+		if (!pdata) {
+			dev_err(&pdev->dev, "%s: Failed to allocate pdata.\n",
+				__func__);
+			ret = -ENOMEM;
+			goto err_free_pdata;
+		}
+
+		pdata->set_timer_src = omap1_dm_timer_set_src;
+		pdata->timer_capability = OMAP_TIMER_ALWON |
+				OMAP_TIMER_NEEDS_RESET | OMAP_TIMER_HAS_DSP_IRQ;
+
+		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+		if (ret) {
+			dev_err(&pdev->dev, "%s: Failed to add platform data.\n",
+				__func__);
+			goto err_free_pdata;
+		}
+
+		ret = platform_device_add(pdev);
+		if (ret) {
+			dev_err(&pdev->dev, "%s: Failed to add platform device.\n",
+				__func__);
+			goto err_free_pdata;
+		}
+
+		dev_dbg(&pdev->dev, " Registered.\n");
+	}
+
+	return 0;
+
+err_free_pdata:
+	kfree(pdata);
+
+err_free_pdev:
+	platform_device_unregister(pdev);
+
+	return ret;
+}
+arch_initcall(omap1_dm_timer_init);
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
new file mode 100644
index 000000000..36bf174b3
--- /dev/null
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -0,0 +1,197 @@
+/*
+ * linux/arch/arm/mach-omap1/timer32k.c
+ *
+ * OMAP 32K Timer
+ *
+ * Copyright (C) 2004 - 2005 Nokia Corporation
+ * Partial timer rewrite and additional dynamic tick timer support by
+ * Tony Lindgen <tony@atomide.com> and
+ * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
+ *
+ * MPU timer code based on the older MPU timer code for OMAP
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+
+#include <plat/counter-32k.h>
+
+#include <mach/hardware.h>
+
+#include "common.h"
+
+/*
+ * ---------------------------------------------------------------------------
+ * 32KHz OS timer
+ *
+ * This currently works only on 16xx, as 1510 does not have the continuous
+ * 32KHz synchronous timer. The 32KHz synchronous timer is used to keep track
+ * of time in addition to the 32KHz OS timer. Using only the 32KHz OS timer
+ * on 1510 would be possible, but the timer would not be as accurate as
+ * with the 32KHz synchronized timer.
+ * ---------------------------------------------------------------------------
+ */
+
+/* 16xx specific defines */
+#define OMAP1_32K_TIMER_BASE		0xfffb9000
+#define OMAP1_32KSYNC_TIMER_BASE	0xfffbc400
+#define OMAP1_32K_TIMER_CR		0x08
+#define OMAP1_32K_TIMER_TVR		0x00
+#define OMAP1_32K_TIMER_TCR		0x04
+
+#define OMAP_32K_TICKS_PER_SEC		(32768)
+
+/*
+ * TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1
+ * so with HZ = 128, TVR = 255.
+ */
+#define OMAP_32K_TIMER_TICK_PERIOD	((OMAP_32K_TICKS_PER_SEC / HZ) - 1)
+
+#define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate)			\
+				(((nr_jiffies) * (clock_rate)) / HZ)
+
+static inline void omap_32k_timer_write(int val, int reg)
+{
+	omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
+}
+
+static inline void omap_32k_timer_start(unsigned long load_val)
+{
+	if (!load_val)
+		load_val = 1;
+	omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR);
+	omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR);
+}
+
+static inline void omap_32k_timer_stop(void)
+{
+	omap_32k_timer_write(0x0, OMAP1_32K_TIMER_CR);
+}
+
+#define omap_32k_timer_ack_irq()
+
+static int omap_32k_timer_set_next_event(unsigned long delta,
+					 struct clock_event_device *dev)
+{
+	omap_32k_timer_start(delta);
+
+	return 0;
+}
+
+static void omap_32k_timer_set_mode(enum clock_event_mode mode,
+				    struct clock_event_device *evt)
+{
+	omap_32k_timer_stop();
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device clockevent_32k_timer = {
+	.name		= "32k-timer",
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event	= omap_32k_timer_set_next_event,
+	.set_mode	= omap_32k_timer_set_mode,
+};
+
+static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &clockevent_32k_timer;
+	omap_32k_timer_ack_irq();
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction omap_32k_timer_irq = {
+	.name		= "32KHz timer",
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= omap_32k_timer_interrupt,
+};
+
+static __init void omap_init_32k_timer(void)
+{
+	setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
+
+	clockevent_32k_timer.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&clockevent_32k_timer,
+					OMAP_32K_TICKS_PER_SEC, 1, 0xfffffffe);
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * Timer initialization
+ * ---------------------------------------------------------------------------
+ */
+int __init omap_32k_timer_init(void)
+{
+	int ret = -ENODEV;
+
+	if (cpu_is_omap16xx()) {
+		void __iomem *base;
+		struct clk *sync32k_ick;
+
+		base = ioremap(OMAP1_32KSYNC_TIMER_BASE, SZ_1K);
+		if (!base) {
+			pr_err("32k_counter: failed to map base addr\n");
+			return -ENODEV;
+		}
+
+		sync32k_ick = clk_get(NULL, "omap_32ksync_ick");
+		if (!IS_ERR(sync32k_ick))
+			clk_enable(sync32k_ick);
+
+		ret = omap_init_clocksource_32k(base);
+	}
+
+	if (!ret)
+		omap_init_32k_timer();
+
+	return ret;
+}
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
new file mode 100644
index 000000000..4118db50d
--- /dev/null
+++ b/arch/arm/mach-omap1/usb.c
@@ -0,0 +1,653 @@
+/*
+ * Platform level USB initialization for FS USB OTG controller on omap1 and 24xx
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+
+#include <mach/mux.h>
+
+#include <mach/usb.h>
+
+#include "common.h"
+
+/* These routines should handle the standard chip-specific modes
+ * for usb0/1/2 ports, covering basic mux and transceiver setup.
+ *
+ * Some board-*.c files will need to set up additional mux options,
+ * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.
+ */
+
+/* TESTED ON:
+ *  - 1611B H2 (with usb1 mini-AB) using standard Mini-B or OTG cables
+ *  - 5912 OSK OHCI (with usb0 standard-A), standard A-to-B cables
+ *  - 5912 OSK UDC, with *nonstandard* A-to-A cable
+ *  - 1510 Innovator UDC with bundled usb0 cable
+ *  - 1510 Innovator OHCI with bundled usb1/usb2 cable
+ *  - 1510 Innovator OHCI with custom usb0 cable, feeding 5V VBUS
+ *  - 1710 custom development board using alternate pin group
+ *  - 1710 H3 (with usb1 mini-AB) using standard Mini-B or OTG cables
+ */
+
+#define INT_USB_IRQ_GEN		IH2_BASE + 20
+#define INT_USB_IRQ_NISO	IH2_BASE + 30
+#define INT_USB_IRQ_ISO		IH2_BASE + 29
+#define INT_USB_IRQ_HGEN	INT_USB_HHC_1
+#define INT_USB_IRQ_OTG		IH2_BASE + 8
+
+#ifdef	CONFIG_ARCH_OMAP_OTG
+
+void __init
+omap_otg_init(struct omap_usb_config *config)
+{
+	u32		syscon;
+	int		alt_pingroup = 0;
+
+	/* NOTE:  no bus or clock setup (yet?) */
+
+	syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
+	if (!(syscon & OTG_RESET_DONE))
+		pr_debug("USB resets not complete?\n");
+
+	//omap_writew(0, OTG_IRQ_EN);
+
+	/* pin muxing and transceiver pinouts */
+	if (config->pins[0] > 2)	/* alt pingroup 2 */
+		alt_pingroup = 1;
+	syscon |= config->usb0_init(config->pins[0], is_usb0_device(config));
+	syscon |= config->usb1_init(config->pins[1]);
+	syscon |= config->usb2_init(config->pins[2], alt_pingroup);
+	pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+	omap_writel(syscon, OTG_SYSCON_1);
+
+	syscon = config->hmc_mode;
+	syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
+#ifdef	CONFIG_USB_OTG
+	if (config->otg)
+		syscon |= OTG_EN;
+#endif
+	if (cpu_class_is_omap1())
+		pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
+			 omap_readl(USB_TRANSCEIVER_CTRL));
+	pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
+	omap_writel(syscon, OTG_SYSCON_2);
+
+	printk("USB: hmc %d", config->hmc_mode);
+	if (!alt_pingroup)
+		printk(", usb2 alt %d wires", config->pins[2]);
+	else if (config->pins[0])
+		printk(", usb0 %d wires%s", config->pins[0],
+			is_usb0_device(config) ? " (dev)" : "");
+	if (config->pins[1])
+		printk(", usb1 %d wires", config->pins[1]);
+	if (!alt_pingroup && config->pins[2])
+		printk(", usb2 %d wires", config->pins[2]);
+	if (config->otg)
+		printk(", Mini-AB on usb%d", config->otg - 1);
+	printk("\n");
+
+	if (cpu_class_is_omap1()) {
+		u16 w;
+
+		/* leave USB clocks/controllers off until needed */
+		w = omap_readw(ULPD_SOFT_REQ);
+		w &= ~SOFT_USB_CLK_REQ;
+		omap_writew(w, ULPD_SOFT_REQ);
+
+		w = omap_readw(ULPD_CLOCK_CTRL);
+		w &= ~USB_MCLK_EN;
+		w |= DIS_USB_PVCI_CLK;
+		omap_writew(w, ULPD_CLOCK_CTRL);
+	}
+	syscon = omap_readl(OTG_SYSCON_1);
+	syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+	if (config->otg || config->register_dev) {
+		struct platform_device *udc_device = config->udc_device;
+		int status;
+
+		syscon &= ~DEV_IDLE_EN;
+		udc_device->dev.platform_data = config;
+		status = platform_device_register(udc_device);
+		if (status)
+			pr_debug("can't register UDC device, %d\n", status);
+	}
+#endif
+
+#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	if (config->otg || config->register_host) {
+		struct platform_device *ohci_device = config->ohci_device;
+		int status;
+
+		syscon &= ~HST_IDLE_EN;
+		ohci_device->dev.platform_data = config;
+		status = platform_device_register(ohci_device);
+		if (status)
+			pr_debug("can't register OHCI device, %d\n", status);
+	}
+#endif
+
+#ifdef	CONFIG_USB_OTG
+	if (config->otg) {
+		struct platform_device *otg_device = config->otg_device;
+		int status;
+
+		syscon &= ~OTG_IDLE_EN;
+		otg_device->dev.platform_data = config;
+		status = platform_device_register(otg_device);
+		if (status)
+			pr_debug("can't register OTG device, %d\n", status);
+	}
+#endif
+	pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
+	omap_writel(syscon, OTG_SYSCON_1);
+}
+
+#else
+void omap_otg_init(struct omap_usb_config *config) {}
+#endif
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+
+static struct resource udc_resources[] = {
+	/* order is significant! */
+	{		/* registers */
+		.start		= UDC_BASE,
+		.end		= UDC_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {		/* general IRQ */
+		.start		= INT_USB_IRQ_GEN,
+		.flags		= IORESOURCE_IRQ,
+	}, {		/* PIO IRQ */
+		.start		= INT_USB_IRQ_NISO,
+		.flags		= IORESOURCE_IRQ,
+	}, {		/* SOF IRQ */
+		.start		= INT_USB_IRQ_ISO,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 udc_dmamask = ~(u32)0;
+
+static struct platform_device udc_device = {
+	.name		= "omap_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &udc_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(udc_resources),
+	.resource	= udc_resources,
+};
+
+static inline void udc_device_init(struct omap_usb_config *pdata)
+{
+	/* IRQ numbers for omap7xx */
+	if(cpu_is_omap7xx()) {
+		udc_resources[1].start = INT_7XX_USB_GENI;
+		udc_resources[2].start = INT_7XX_USB_NON_ISO;
+		udc_resources[3].start = INT_7XX_USB_ISO;
+	}
+	pdata->udc_device = &udc_device;
+}
+
+#else
+
+static inline void udc_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+
+/* The dmamask must be set for OHCI to work */
+static u64 ohci_dmamask = ~(u32)0;
+
+static struct resource ohci_resources[] = {
+	{
+		.start	= OMAP_OHCI_BASE,
+		.end	= OMAP_OHCI_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_IRQ_HGEN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci_device = {
+	.name			= "ohci",
+	.id			= -1,
+	.dev = {
+		.dma_mask		= &ohci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(ohci_resources),
+	.resource		= ohci_resources,
+};
+
+static inline void ohci_device_init(struct omap_usb_config *pdata)
+{
+	if (cpu_is_omap7xx())
+		ohci_resources[1].start = INT_7XX_USB_HHC_1;
+	pdata->ohci_device = &ohci_device;
+	pdata->ocpi_enable = &ocpi_enable;
+}
+
+#else
+
+static inline void ohci_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+#if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
+
+static struct resource otg_resources[] = {
+	/* order is significant! */
+	{
+		.start		= OTG_BASE,
+		.end		= OTG_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= INT_USB_IRQ_OTG,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device otg_device = {
+	.name		= "omap_otg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+	.resource	= otg_resources,
+};
+
+static inline void otg_device_init(struct omap_usb_config *pdata)
+{
+	if (cpu_is_omap7xx())
+		otg_resources[1].start = INT_7XX_USB_OTG;
+	pdata->otg_device = &otg_device;
+}
+
+#else
+
+static inline void otg_device_init(struct omap_usb_config *pdata)
+{
+}
+
+#endif
+
+static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
+{
+	u32	syscon1 = 0;
+
+	if (nwires == 0) {
+		if (!cpu_is_omap15xx()) {
+			u32 l;
+
+			/* pulldown D+/D- */
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l &= ~(3 << 1);
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		return 0;
+	}
+
+	if (is_device) {
+		if (cpu_is_omap7xx()) {
+			omap_cfg_reg(AA17_7XX_USB_DM);
+			omap_cfg_reg(W16_7XX_USB_PU_EN);
+			omap_cfg_reg(W17_7XX_USB_VBUSI);
+			omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
+			omap_cfg_reg(W19_7XX_USB_DCRST);
+		} else
+			omap_cfg_reg(W4_USB_PUEN);
+	}
+
+	if (nwires == 2) {
+		u32 l;
+
+		// omap_cfg_reg(P9_USB_DP);
+		// omap_cfg_reg(R8_USB_DM);
+
+		if (cpu_is_omap15xx()) {
+			/* This works on 1510-Innovator */
+			return 0;
+		}
+
+		/* NOTES:
+		 *  - peripheral should configure VBUS detection!
+		 *  - only peripherals may use the internal D+/D- pulldowns
+		 *  - OTG support on this port not yet written
+		 */
+
+		/* Don't do this for omap7xx -- it causes USB to not work correctly */
+		if (!cpu_is_omap7xx()) {
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l &= ~(7 << 4);
+			if (!is_device)
+				l |= (3 << 1);
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+
+		return 3 << 16;
+	}
+
+	/* alternate pin config, external transceiver */
+	if (cpu_is_omap15xx()) {
+		printk(KERN_ERR "no usb0 alt pin config on 15xx\n");
+		return 0;
+	}
+
+	omap_cfg_reg(V6_USB0_TXD);
+	omap_cfg_reg(W9_USB0_TXEN);
+	omap_cfg_reg(W5_USB0_SE0);
+	if (nwires != 3)
+		omap_cfg_reg(Y5_USB0_RCV);
+
+	/* NOTE:  SPEED and SUSP aren't configured here.  OTG hosts
+	 * may be able to use I2C requests to set those bits along
+	 * with VBUS switching and overcurrent detection.
+	 */
+
+	if (nwires != 6) {
+		u32 l;
+
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~CONF_USB2_UNI_R;
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
+	}
+
+	switch (nwires) {
+	case 3:
+		syscon1 = 2;
+		break;
+	case 4:
+		syscon1 = 1;
+		break;
+	case 6:
+		syscon1 = 3;
+		{
+			u32 l;
+
+			omap_cfg_reg(AA9_USB0_VP);
+			omap_cfg_reg(R9_USB0_VM);
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l |= CONF_USB2_UNI_R;
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		break;
+	default:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			0, nwires);
+	}
+
+	return syscon1 << 16;
+}
+
+static u32 __init omap1_usb1_init(unsigned nwires)
+{
+	u32	syscon1 = 0;
+
+	if (!cpu_is_omap15xx() && nwires != 6) {
+		u32 l;
+
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~CONF_USB1_UNI_R;
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
+	}
+	if (nwires == 0)
+		return 0;
+
+	/* external transceiver */
+	omap_cfg_reg(USB1_TXD);
+	omap_cfg_reg(USB1_TXEN);
+	if (nwires != 3)
+		omap_cfg_reg(USB1_RCV);
+
+	if (cpu_is_omap15xx()) {
+		omap_cfg_reg(USB1_SEO);
+		omap_cfg_reg(USB1_SPEED);
+		// SUSP
+	} else if (cpu_is_omap1610() || cpu_is_omap5912()) {
+		omap_cfg_reg(W13_1610_USB1_SE0);
+		omap_cfg_reg(R13_1610_USB1_SPEED);
+		// SUSP
+	} else if (cpu_is_omap1710()) {
+		omap_cfg_reg(R13_1710_USB1_SE0);
+		// SUSP
+	} else {
+		pr_debug("usb%d cpu unrecognized\n", 1);
+		return 0;
+	}
+
+	switch (nwires) {
+	case 2:
+		goto bad;
+	case 3:
+		syscon1 = 2;
+		break;
+	case 4:
+		syscon1 = 1;
+		break;
+	case 6:
+		syscon1 = 3;
+		omap_cfg_reg(USB1_VP);
+		omap_cfg_reg(USB1_VM);
+		if (!cpu_is_omap15xx()) {
+			u32 l;
+
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l |= CONF_USB1_UNI_R;
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		break;
+	default:
+bad:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			1, nwires);
+	}
+
+	return syscon1 << 20;
+}
+
+static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
+{
+	u32	syscon1 = 0;
+
+	/* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
+	if (alt_pingroup || nwires == 0)
+		return 0;
+
+	if (!cpu_is_omap15xx() && nwires != 6) {
+		u32 l;
+
+		l = omap_readl(USB_TRANSCEIVER_CTRL);
+		l &= ~CONF_USB2_UNI_R;
+		omap_writel(l, USB_TRANSCEIVER_CTRL);
+	}
+
+	/* external transceiver */
+	if (cpu_is_omap15xx()) {
+		omap_cfg_reg(USB2_TXD);
+		omap_cfg_reg(USB2_TXEN);
+		omap_cfg_reg(USB2_SEO);
+		if (nwires != 3)
+			omap_cfg_reg(USB2_RCV);
+		/* there is no USB2_SPEED */
+	} else if (cpu_is_omap16xx()) {
+		omap_cfg_reg(V6_USB2_TXD);
+		omap_cfg_reg(W9_USB2_TXEN);
+		omap_cfg_reg(W5_USB2_SE0);
+		if (nwires != 3)
+			omap_cfg_reg(Y5_USB2_RCV);
+		// FIXME omap_cfg_reg(USB2_SPEED);
+	} else {
+		pr_debug("usb%d cpu unrecognized\n", 1);
+		return 0;
+	}
+
+	// omap_cfg_reg(USB2_SUSP);
+
+	switch (nwires) {
+	case 2:
+		goto bad;
+	case 3:
+		syscon1 = 2;
+		break;
+	case 4:
+		syscon1 = 1;
+		break;
+	case 5:
+		goto bad;
+	case 6:
+		syscon1 = 3;
+		if (cpu_is_omap15xx()) {
+			omap_cfg_reg(USB2_VP);
+			omap_cfg_reg(USB2_VM);
+		} else {
+			u32 l;
+
+			omap_cfg_reg(AA9_USB2_VP);
+			omap_cfg_reg(R9_USB2_VM);
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l |= CONF_USB2_UNI_R;
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
+		break;
+	default:
+bad:
+		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
+			2, nwires);
+	}
+
+	return syscon1 << 24;
+}
+
+#ifdef	CONFIG_ARCH_OMAP15XX
+
+/* ULPD_DPLL_CTRL */
+#define DPLL_IOB		(1 << 13)
+#define DPLL_PLL_ENABLE		(1 << 4)
+#define DPLL_LOCK		(1 << 0)
+
+/* ULPD_APLL_CTRL */
+#define APLL_NDPLL_SWITCH	(1 << 0)
+
+static void __init omap_1510_usb_init(struct omap_usb_config *config)
+{
+	unsigned int val;
+	u16 w;
+
+	config->usb0_init(config->pins[0], is_usb0_device(config));
+	config->usb1_init(config->pins[1]);
+	config->usb2_init(config->pins[2], 0);
+
+	val = omap_readl(MOD_CONF_CTRL_0) & ~(0x3f << 1);
+	val |= (config->hmc_mode << 1);
+	omap_writel(val, MOD_CONF_CTRL_0);
+
+	printk("USB: hmc %d", config->hmc_mode);
+	if (config->pins[0])
+		printk(", usb0 %d wires%s", config->pins[0],
+			is_usb0_device(config) ? " (dev)" : "");
+	if (config->pins[1])
+		printk(", usb1 %d wires", config->pins[1]);
+	if (config->pins[2])
+		printk(", usb2 %d wires", config->pins[2]);
+	printk("\n");
+
+	/* use DPLL for 48 MHz function clock */
+	pr_debug("APLL %04x DPLL %04x REQ %04x\n", omap_readw(ULPD_APLL_CTRL),
+			omap_readw(ULPD_DPLL_CTRL), omap_readw(ULPD_SOFT_REQ));
+
+	w = omap_readw(ULPD_APLL_CTRL);
+	w &= ~APLL_NDPLL_SWITCH;
+	omap_writew(w, ULPD_APLL_CTRL);
+
+	w = omap_readw(ULPD_DPLL_CTRL);
+	w |= DPLL_IOB | DPLL_PLL_ENABLE;
+	omap_writew(w, ULPD_DPLL_CTRL);
+
+	w = omap_readw(ULPD_SOFT_REQ);
+	w |= SOFT_UDC_REQ | SOFT_DPLL_REQ;
+	omap_writew(w, ULPD_SOFT_REQ);
+
+	while (!(omap_readw(ULPD_DPLL_CTRL) & DPLL_LOCK))
+		cpu_relax();
+
+#if IS_ENABLED(CONFIG_USB_OMAP)
+	if (config->register_dev) {
+		int status;
+
+		udc_device.dev.platform_data = config;
+		status = platform_device_register(&udc_device);
+		if (status)
+			pr_debug("can't register UDC device, %d\n", status);
+		/* udc driver gates 48MHz by D+ pullup */
+	}
+#endif
+
+#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+	if (config->register_host) {
+		int status;
+
+		ohci_device.dev.platform_data = config;
+		status = platform_device_register(&ohci_device);
+		if (status)
+			pr_debug("can't register OHCI device, %d\n", status);
+		/* hcd explicitly gates 48MHz */
+	}
+#endif
+}
+
+#else
+static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
+#endif
+
+void __init omap1_usb_init(struct omap_usb_config *_pdata)
+{
+	struct omap_usb_config *pdata;
+
+	pdata = kmemdup(_pdata, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return;
+
+	pdata->usb0_init = omap1_usb0_init;
+	pdata->usb1_init = omap1_usb1_init;
+	pdata->usb2_init = omap1_usb2_init;
+	udc_device_init(pdata);
+	ohci_device_init(pdata);
+	otg_device_init(pdata);
+
+	if (cpu_is_omap7xx() || cpu_is_omap16xx())
+		omap_otg_init(pdata);
+	else if (cpu_is_omap15xx())
+		omap_1510_usb_init(pdata);
+	else
+		printk(KERN_ERR "USB: No init for your chip yet\n");
+}