Linux-libre 4.3.2-gnu

1 files changed, 28 insertions, 648 deletions

diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index a699d7169..acb60ed17 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -20,12 +20,11 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/bitops.h>
-#include <linux/regmap.h>
 #include <linux/of_address.h>
-#include <linux/bootmem.h>
 #include <asm/cpu.h>
 
 #include <trace/events/power.h>
@@ -40,19 +39,8 @@
 #include "cm-regbits-34xx.h"
 #include "common.h"
 
-/*
- * MAX_MODULE_ENABLE_WAIT: maximum of number of microseconds to wait
- * for a module to indicate that it is no longer in idle
- */
-#define MAX_MODULE_ENABLE_WAIT		100000
-
 u16 cpu_mask;
 
-/*
- * Clock features setup. Used instead of CPU type checks.
- */
-struct ti_clk_features ti_clk_features;
-
 /* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
 #define OMAP3430_DPLL_FINT_BAND1_MIN	750000
 #define OMAP3430_DPLL_FINT_BAND1_MAX	2100000
@@ -66,119 +54,24 @@ struct ti_clk_features ti_clk_features;
 #define OMAP3PLUS_DPLL_FINT_MIN		32000
 #define OMAP3PLUS_DPLL_FINT_MAX		52000000
 
-/*
- * clkdm_control: if true, then when a clock is enabled in the
- * hardware, its clockdomain will first be enabled; and when a clock
- * is disabled in the hardware, its clockdomain will be disabled
- * afterwards.
- */
-static bool clkdm_control = true;
-
-static LIST_HEAD(clk_hw_omap_clocks);
-
-struct clk_iomap {
-	struct regmap *regmap;
-	void __iomem *mem;
-};
-
-static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
-
-static void clk_memmap_writel(u32 val, void __iomem *reg)
-{
-	struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
-	struct clk_iomap *io = clk_memmaps[r->index];
-
-	if (io->regmap)
-		regmap_write(io->regmap, r->offset, val);
-	else
-		writel_relaxed(val, io->mem + r->offset);
-}
-
-static u32 clk_memmap_readl(void __iomem *reg)
-{
-	u32 val;
-	struct clk_omap_reg *r = (struct clk_omap_reg *)&reg;
-	struct clk_iomap *io = clk_memmaps[r->index];
-
-	if (io->regmap)
-		regmap_read(io->regmap, r->offset, &val);
-	else
-		val = readl_relaxed(io->mem + r->offset);
-
-	return val;
-}
-
-void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
-{
-	if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
-		writel_relaxed(val, reg);
-	else
-		clk_memmap_writel(val, reg);
-}
-
-u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
-{
-	if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
-		return readl_relaxed(reg);
-	else
-		return clk_memmap_readl(reg);
-}
-
 static struct ti_clk_ll_ops omap_clk_ll_ops = {
-	.clk_readl = clk_memmap_readl,
-	.clk_writel = clk_memmap_writel,
+	.clkdm_clk_enable = clkdm_clk_enable,
+	.clkdm_clk_disable = clkdm_clk_disable,
+	.cm_wait_module_ready = omap_cm_wait_module_ready,
+	.cm_split_idlest_reg = cm_split_idlest_reg,
 };
 
 /**
- * omap2_clk_provider_init - initialize a clock provider
- * @match_table: DT device table to match for devices to init
- * @np: device node pointer for the this clock provider
- * @index: index for the clock provider
- + @syscon: syscon regmap pointer
- * @mem: iomem pointer for the clock provider memory area, only used if
- *	 syscon is not provided
+ * omap2_clk_setup_ll_ops - setup clock driver low-level ops
  *
- * Initializes a clock provider module (CM/PRM etc.), registering
- * the memory mapping at specified index and initializing the
- * low level driver infrastructure. Returns 0 in success.
+ * Sets up clock driver low-level platform ops. These are needed
+ * for register accesses and various other misc platform operations.
+ * Returns 0 on success, -EBUSY if low level ops have been registered
+ * already.
  */
-int __init omap2_clk_provider_init(struct device_node *np, int index,
-				   struct regmap *syscon, void __iomem *mem)
+int __init omap2_clk_setup_ll_ops(void)
 {
-	struct clk_iomap *io;
-
-	ti_clk_ll_ops = &omap_clk_ll_ops;
-
-	io = kzalloc(sizeof(*io), GFP_KERNEL);
-
-	io->regmap = syscon;
-	io->mem = mem;
-
-	clk_memmaps[index] = io;
-
-	ti_dt_clk_init_provider(np, index);
-
-	return 0;
-}
-
-/**
- * omap2_clk_legacy_provider_init - initialize a legacy clock provider
- * @index: index for the clock provider
- * @mem: iomem pointer for the clock provider memory area
- *
- * Initializes a legacy clock provider memory mapping.
- */
-void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
-{
-	struct clk_iomap *io;
-
-	ti_clk_ll_ops = &omap_clk_ll_ops;
-
-	io = memblock_virt_alloc(sizeof(*io), 0);
-
-	io->mem = mem;
-
-	clk_memmaps[index] = io;
+	return ti_clk_setup_ll_ops(&omap_clk_ll_ops);
 }
 
 /*
@@ -187,77 +80,6 @@ void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
 
 /* Private functions */
 
-
-/**
- * _wait_idlest_generic - wait for a module to leave the idle state
- * @clk: module clock to wait for (needed for register offsets)
- * @reg: virtual address of module IDLEST register
- * @mask: value to mask against to determine if the module is active
- * @idlest: idle state indicator (0 or 1) for the clock
- * @name: name of the clock (for printk)
- *
- * Wait for a module to leave idle, where its idle-status register is
- * not inside the CM module.  Returns 1 if the module left idle
- * promptly, or 0 if the module did not leave idle before the timeout
- * elapsed.  XXX Deprecated - should be moved into drivers for the
- * individual IP block that the IDLEST register exists in.
- */
-static int _wait_idlest_generic(struct clk_hw_omap *clk, void __iomem *reg,
-				u32 mask, u8 idlest, const char *name)
-{
-	int i = 0, ena = 0;
-
-	ena = (idlest) ? 0 : mask;
-
-	omap_test_timeout(((omap2_clk_readl(clk, reg) & mask) == ena),
-			  MAX_MODULE_ENABLE_WAIT, i);
-
-	if (i < MAX_MODULE_ENABLE_WAIT)
-		pr_debug("omap clock: module associated with clock %s ready after %d loops\n",
-			 name, i);
-	else
-		pr_err("omap clock: module associated with clock %s didn't enable in %d tries\n",
-		       name, MAX_MODULE_ENABLE_WAIT);
-
-	return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
-};
-
-/**
- * _omap2_module_wait_ready - wait for an OMAP module to leave IDLE
- * @clk: struct clk * belonging to the module
- *
- * If the necessary clocks for the OMAP hardware IP block that
- * corresponds to clock @clk are enabled, then wait for the module to
- * indicate readiness (i.e., to leave IDLE).  This code does not
- * belong in the clock code and will be moved in the medium term to
- * module-dependent code.  No return value.
- */
-static void _omap2_module_wait_ready(struct clk_hw_omap *clk)
-{
-	void __iomem *companion_reg, *idlest_reg;
-	u8 other_bit, idlest_bit, idlest_val, idlest_reg_id;
-	s16 prcm_mod;
-	int r;
-
-	/* Not all modules have multiple clocks that their IDLEST depends on */
-	if (clk->ops->find_companion) {
-		clk->ops->find_companion(clk, &companion_reg, &other_bit);
-		if (!(omap2_clk_readl(clk, companion_reg) & (1 << other_bit)))
-			return;
-	}
-
-	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit, &idlest_val);
-	r = cm_split_idlest_reg(idlest_reg, &prcm_mod, &idlest_reg_id);
-	if (r) {
-		/* IDLEST register not in the CM module */
-		_wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
-				     idlest_val, __clk_get_name(clk->hw.clk));
-	} else {
-		omap_cm_wait_module_ready(0, prcm_mod, idlest_reg_id,
-					  idlest_bit);
-	};
-}
-
 /* Public functions */
 
 /**
@@ -290,279 +112,6 @@ void omap2_init_clk_clkdm(struct clk_hw *hw)
 	}
 }
 
-/**
- * omap2_clk_disable_clkdm_control - disable clkdm control on clk enable/disable
- *
- * Prevent the OMAP clock code from calling into the clockdomain code
- * when a hardware clock in that clockdomain is enabled or disabled.
- * Intended to be called at init time from omap*_clk_init().  No
- * return value.
- */
-void __init omap2_clk_disable_clkdm_control(void)
-{
-	clkdm_control = false;
-}
-
-/**
- * omap2_clk_dflt_find_companion - find companion clock to @clk
- * @clk: struct clk * to find the companion clock of
- * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
- * @other_bit: u8 ** to return the companion clock bit shift in
- *
- * Note: We don't need special code here for INVERT_ENABLE for the
- * time being since INVERT_ENABLE only applies to clocks enabled by
- * CM_CLKEN_PLL
- *
- * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes it's
- * just a matter of XORing the bits.
- *
- * Some clocks don't have companion clocks.  For example, modules with
- * only an interface clock (such as MAILBOXES) don't have a companion
- * clock.  Right now, this code relies on the hardware exporting a bit
- * in the correct companion register that indicates that the
- * nonexistent 'companion clock' is active.  Future patches will
- * associate this type of code with per-module data structures to
- * avoid this issue, and remove the casts.  No return value.
- */
-void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk,
-			void __iomem **other_reg, u8 *other_bit)
-{
-	u32 r;
-
-	/*
-	 * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes
-	 * it's just a matter of XORing the bits.
-	 */
-	r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
-
-	*other_reg = (__force void __iomem *)r;
-	*other_bit = clk->enable_bit;
-}
-
-/**
- * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
- * @clk: struct clk * to find IDLEST info for
- * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
- * @idlest_bit: u8 * to return the CM_IDLEST bit shift in
- * @idlest_val: u8 * to return the idle status indicator
- *
- * Return the CM_IDLEST register address and bit shift corresponding
- * to the module that "owns" this clock.  This default code assumes
- * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
- * the IDLEST register address ID corresponds to the CM_*CLKEN
- * register address ID (e.g., that CM_FCLKEN2 corresponds to
- * CM_IDLEST2).  This is not true for all modules.  No return value.
- */
-void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk,
-		void __iomem **idlest_reg, u8 *idlest_bit, u8 *idlest_val)
-{
-	u32 r;
-
-	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
-	*idlest_reg = (__force void __iomem *)r;
-	*idlest_bit = clk->enable_bit;
-
-	/*
-	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
-	 * 34xx reverses this, just to keep us on our toes
-	 * AM35xx uses both, depending on the module.
-	 */
-	*idlest_val = ti_clk_features.cm_idlest_val;
-}
-
-/**
- * omap2_dflt_clk_enable - enable a clock in the hardware
- * @hw: struct clk_hw * of the clock to enable
- *
- * Enable the clock @hw in the hardware.  We first call into the OMAP
- * clockdomain code to "enable" the corresponding clockdomain if this
- * is the first enabled user of the clockdomain.  Then program the
- * hardware to enable the clock.  Then wait for the IP block that uses
- * this clock to leave idle (if applicable).  Returns the error value
- * from clkdm_clk_enable() if it terminated with an error, or -EINVAL
- * if @hw has a null clock enable_reg, or zero upon success.
- */
-int omap2_dflt_clk_enable(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk;
-	u32 v;
-	int ret = 0;
-
-	clk = to_clk_hw_omap(hw);
-
-	if (clkdm_control && clk->clkdm) {
-		ret = clkdm_clk_enable(clk->clkdm, hw->clk);
-		if (ret) {
-			WARN(1, "%s: could not enable %s's clockdomain %s: %d\n",
-			     __func__, __clk_get_name(hw->clk),
-			     clk->clkdm->name, ret);
-			return ret;
-		}
-	}
-
-	if (unlikely(clk->enable_reg == NULL)) {
-		pr_err("%s: %s missing enable_reg\n", __func__,
-		       __clk_get_name(hw->clk));
-		ret = -EINVAL;
-		goto err;
-	}
-
-	/* FIXME should not have INVERT_ENABLE bit here */
-	v = omap2_clk_readl(clk, clk->enable_reg);
-	if (clk->flags & INVERT_ENABLE)
-		v &= ~(1 << clk->enable_bit);
-	else
-		v |= (1 << clk->enable_bit);
-	omap2_clk_writel(v, clk, clk->enable_reg);
-	v = omap2_clk_readl(clk, clk->enable_reg); /* OCP barrier */
-
-	if (clk->ops && clk->ops->find_idlest)
-		_omap2_module_wait_ready(clk);
-
-	return 0;
-
-err:
-	if (clkdm_control && clk->clkdm)
-		clkdm_clk_disable(clk->clkdm, hw->clk);
-	return ret;
-}
-
-/**
- * omap2_dflt_clk_disable - disable a clock in the hardware
- * @hw: struct clk_hw * of the clock to disable
- *
- * Disable the clock @hw in the hardware, and call into the OMAP
- * clockdomain code to "disable" the corresponding clockdomain if all
- * clocks/hwmods in that clockdomain are now disabled.  No return
- * value.
- */
-void omap2_dflt_clk_disable(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk;
-	u32 v;
-
-	clk = to_clk_hw_omap(hw);
-	if (!clk->enable_reg) {
-		/*
-		 * 'independent' here refers to a clock which is not
-		 * controlled by its parent.
-		 */
-		pr_err("%s: independent clock %s has no enable_reg\n",
-		       __func__, __clk_get_name(hw->clk));
-		return;
-	}
-
-	v = omap2_clk_readl(clk, clk->enable_reg);
-	if (clk->flags & INVERT_ENABLE)
-		v |= (1 << clk->enable_bit);
-	else
-		v &= ~(1 << clk->enable_bit);
-	omap2_clk_writel(v, clk, clk->enable_reg);
-	/* No OCP barrier needed here since it is a disable operation */
-
-	if (clkdm_control && clk->clkdm)
-		clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
-/**
- * omap2_clkops_enable_clkdm - increment usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being enabled
- *
- * Increment the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 1, the clockdomain will be "enabled."
- * Only needed for clocks that don't use omap2_dflt_clk_enable() as
- * their enable function pointer.  Passes along the return value of
- * clkdm_clk_enable(), -EINVAL if @hw is not associated with a
- * clockdomain, or 0 if clock framework-based clockdomain control is
- * not implemented.
- */
-int omap2_clkops_enable_clkdm(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk;
-	int ret = 0;
-
-	clk = to_clk_hw_omap(hw);
-
-	if (unlikely(!clk->clkdm)) {
-		pr_err("%s: %s: no clkdm set ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-		return -EINVAL;
-	}
-
-	if (unlikely(clk->enable_reg))
-		pr_err("%s: %s: should use dflt_clk_enable ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-
-	if (!clkdm_control) {
-		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
-		       __func__, __clk_get_name(hw->clk));
-		return 0;
-	}
-
-	ret = clkdm_clk_enable(clk->clkdm, hw->clk);
-	WARN(ret, "%s: could not enable %s's clockdomain %s: %d\n",
-	     __func__, __clk_get_name(hw->clk), clk->clkdm->name, ret);
-
-	return ret;
-}
-
-/**
- * omap2_clkops_disable_clkdm - decrement usecount on clkdm of @hw
- * @hw: struct clk_hw * of the clock being disabled
- *
- * Decrement the usecount of the clockdomain of the clock pointed to
- * by @hw; if the usecount is 0, the clockdomain will be "disabled."
- * Only needed for clocks that don't use omap2_dflt_clk_disable() as their
- * disable function pointer.  No return value.
- */
-void omap2_clkops_disable_clkdm(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk;
-
-	clk = to_clk_hw_omap(hw);
-
-	if (unlikely(!clk->clkdm)) {
-		pr_err("%s: %s: no clkdm set ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-		return;
-	}
-
-	if (unlikely(clk->enable_reg))
-		pr_err("%s: %s: should use dflt_clk_disable ?!\n", __func__,
-		       __clk_get_name(hw->clk));
-
-	if (!clkdm_control) {
-		pr_err("%s: %s: clkfw-based clockdomain control disabled ?!\n",
-		       __func__, __clk_get_name(hw->clk));
-		return;
-	}
-
-	clkdm_clk_disable(clk->clkdm, hw->clk);
-}
-
-/**
- * omap2_dflt_clk_is_enabled - is clock enabled in the hardware?
- * @hw: struct clk_hw * to check
- *
- * Return 1 if the clock represented by @hw is enabled in the
- * hardware, or 0 otherwise.  Intended for use in the struct
- * clk_ops.is_enabled function pointer.
- */
-int omap2_dflt_clk_is_enabled(struct clk_hw *hw)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	u32 v;
-
-	v = omap2_clk_readl(clk, clk->enable_reg);
-
-	if (clk->flags & INVERT_ENABLE)
-		v ^= BIT(clk->enable_bit);
-
-	v &= BIT(clk->enable_bit);
-
-	return v ? 1 : 0;
-}
-
 static int __initdata mpurate;
 
 /*
@@ -584,178 +133,6 @@ static int __init omap_clk_setup(char *str)
 __setup("mpurate=", omap_clk_setup);
 
 /**
- * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
- * @clk: struct clk * to initialize
- *
- * Add an OMAP clock @clk to the internal list of OMAP clocks.  Used
- * temporarily for autoidle handling, until this support can be
- * integrated into the common clock framework code in some way.  No
- * return value.
- */
-void omap2_init_clk_hw_omap_clocks(struct clk *clk)
-{
-	struct clk_hw_omap *c;
-
-	if (__clk_get_flags(clk) & CLK_IS_BASIC)
-		return;
-
-	c = to_clk_hw_omap(__clk_get_hw(clk));
-	list_add(&c->node, &clk_hw_omap_clocks);
-}
-
-/**
- * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that
- * support it
- *
- * Enable clock autoidle on all OMAP clocks that have allow_idle
- * function pointers associated with them.  This function is intended
- * to be temporary until support for this is added to the common clock
- * code.  Returns 0.
- */
-int omap2_clk_enable_autoidle_all(void)
-{
-	struct clk_hw_omap *c;
-
-	list_for_each_entry(c, &clk_hw_omap_clocks, node)
-		if (c->ops && c->ops->allow_idle)
-			c->ops->allow_idle(c);
-
-	of_ti_clk_allow_autoidle_all();
-
-	return 0;
-}
-
-/**
- * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that
- * support it
- *
- * Disable clock autoidle on all OMAP clocks that have allow_idle
- * function pointers associated with them.  This function is intended
- * to be temporary until support for this is added to the common clock
- * code.  Returns 0.
- */
-int omap2_clk_disable_autoidle_all(void)
-{
-	struct clk_hw_omap *c;
-
-	list_for_each_entry(c, &clk_hw_omap_clocks, node)
-		if (c->ops && c->ops->deny_idle)
-			c->ops->deny_idle(c);
-
-	of_ti_clk_deny_autoidle_all();
-
-	return 0;
-}
-
-/**
- * omap2_clk_deny_idle - disable autoidle on an OMAP clock
- * @clk: struct clk * to disable autoidle for
- *
- * Disable autoidle on an OMAP clock.
- */
-int omap2_clk_deny_idle(struct clk *clk)
-{
-	struct clk_hw_omap *c;
-
-	if (__clk_get_flags(clk) & CLK_IS_BASIC)
-		return -EINVAL;
-
-	c = to_clk_hw_omap(__clk_get_hw(clk));
-	if (c->ops && c->ops->deny_idle)
-		c->ops->deny_idle(c);
-	return 0;
-}
-
-/**
- * omap2_clk_allow_idle - enable autoidle on an OMAP clock
- * @clk: struct clk * to enable autoidle for
- *
- * Enable autoidle on an OMAP clock.
- */
-int omap2_clk_allow_idle(struct clk *clk)
-{
-	struct clk_hw_omap *c;
-
-	if (__clk_get_flags(clk) & CLK_IS_BASIC)
-		return -EINVAL;
-
-	c = to_clk_hw_omap(__clk_get_hw(clk));
-	if (c->ops && c->ops->allow_idle)
-		c->ops->allow_idle(c);
-	return 0;
-}
-
-/**
- * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
- * @clk_names: ptr to an array of strings of clock names to enable
- * @num_clocks: number of clock names in @clk_names
- *
- * Prepare and enable a list of clocks, named by @clk_names.  No
- * return value. XXX Deprecated; only needed until these clocks are
- * properly claimed and enabled by the drivers or core code that uses
- * them.  XXX What code disables & calls clk_put on these clocks?
- */
-void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
-{
-	struct clk *init_clk;
-	int i;
-
-	for (i = 0; i < num_clocks; i++) {
-		init_clk = clk_get(NULL, clk_names[i]);
-		if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
-				clk_names[i]))
-			continue;
-		clk_prepare_enable(init_clk);
-	}
-}
-
-const struct clk_hw_omap_ops clkhwops_wait = {
-	.find_idlest	= omap2_clk_dflt_find_idlest,
-	.find_companion	= omap2_clk_dflt_find_companion,
-};
-
-/**
- * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument
- * @mpurate_ck_name: clk name of the clock to change rate
- *
- * Change the ARM MPU clock rate to the rate specified on the command
- * line, if one was specified.  @mpurate_ck_name should be
- * "virt_prcm_set" on OMAP2xxx and "dpll1_ck" on OMAP34xx/OMAP36xx.
- * XXX Does not handle voltage scaling - on OMAP2xxx this is currently
- * handled by the virt_prcm_set clock, but this should be handled by
- * the OPP layer.  XXX This is intended to be handled by the OPP layer
- * code in the near future and should be removed from the clock code.
- * Returns -EINVAL if 'mpurate' is zero or if clk_set_rate() rejects
- * the rate, -ENOENT if the struct clk referred to by @mpurate_ck_name
- * cannot be found, or 0 upon success.
- */
-int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name)
-{
-	struct clk *mpurate_ck;
-	int r;
-
-	if (!mpurate)
-		return -EINVAL;
-
-	mpurate_ck = clk_get(NULL, mpurate_ck_name);
-	if (WARN(IS_ERR(mpurate_ck), "Failed to get %s.\n", mpurate_ck_name))
-		return -ENOENT;
-
-	r = clk_set_rate(mpurate_ck, mpurate);
-	if (r < 0) {
-		WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n",
-		     mpurate_ck_name, mpurate, r);
-		clk_put(mpurate_ck);
-		return -EINVAL;
-	}
-
-	calibrate_delay();
-	clk_put(mpurate_ck);
-
-	return 0;
-}
-
-/**
  * omap2_clk_print_new_rates - print summary of current clock tree rates
  * @hfclkin_ck_name: clk name for the off-chip HF oscillator
  * @core_ck_name: clk name for the on-chip CORE_CLK
@@ -801,29 +178,30 @@ void __init omap2_clk_print_new_rates(const char *hfclkin_ck_name,
  */
 void __init ti_clk_init_features(void)
 {
+	struct ti_clk_features features = { 0 };
 	/* Fint setup for DPLLs */
 	if (cpu_is_omap3430()) {
-		ti_clk_features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
-		ti_clk_features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
-		ti_clk_features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
-		ti_clk_features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
+		features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
+		features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
+		features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX;
+		features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN;
 	} else {
-		ti_clk_features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
-		ti_clk_features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
+		features.fint_min = OMAP3PLUS_DPLL_FINT_MIN;
+		features.fint_max = OMAP3PLUS_DPLL_FINT_MAX;
 	}
 
 	/* Bypass value setup for DPLLs */
 	if (cpu_is_omap24xx()) {
-		ti_clk_features.dpll_bypass_vals |=
+		features.dpll_bypass_vals |=
 			(1 << OMAP2XXX_EN_DPLL_LPBYPASS) |
 			(1 << OMAP2XXX_EN_DPLL_FRBYPASS);
 	} else if (cpu_is_omap34xx()) {
-		ti_clk_features.dpll_bypass_vals |=
+		features.dpll_bypass_vals |=
 			(1 << OMAP3XXX_EN_DPLL_LPBYPASS) |
 			(1 << OMAP3XXX_EN_DPLL_FRBYPASS);
 	} else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() ||
 		   soc_is_omap54xx() || soc_is_dra7xx()) {
-		ti_clk_features.dpll_bypass_vals |=
+		features.dpll_bypass_vals |=
 			(1 << OMAP4XXX_EN_DPLL_LPBYPASS) |
 			(1 << OMAP4XXX_EN_DPLL_FRBYPASS) |
 			(1 << OMAP4XXX_EN_DPLL_MNBYPASS);
@@ -831,7 +209,7 @@ void __init ti_clk_init_features(void)
 
 	/* Jitter correction only available on OMAP343X */
 	if (cpu_is_omap343x())
-		ti_clk_features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
+		features.flags |= TI_CLK_DPLL_HAS_FREQSEL;
 
 	/* Idlest value for interface clocks.
 	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
@@ -839,11 +217,13 @@ void __init ti_clk_init_features(void)
 	 * AM35xx uses both, depending on the module.
 	 */
 	if (cpu_is_omap24xx())
-		ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
+		features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
 	else if (cpu_is_omap34xx())
-		ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
+		features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
 
 	/* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
 	if (omap_rev() == OMAP3430_REV_ES1_0)
-		ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+		features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
+
+	ti_clk_setup_features(&features);
 }