Initial import

1 files changed, 505 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
new file mode 100644
index 000000000..9a8611ab5
--- /dev/null
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -0,0 +1,505 @@
+/*
+ * linux/arch/arm/mach-omap2/hsmmc.c
+ *
+ * Copyright (C) 2007-2008 Texas Instruments
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
+
+#include "soc.h"
+#include "omap_device.h"
+#include "omap-pm.h"
+
+#include "mux.h"
+#include "hsmmc.h"
+#include "control.h"
+
+#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+
+static u16 control_pbias_offset;
+static u16 control_devconf1_offset;
+
+#define HSMMC_NAME_LEN	9
+
+static void omap_hsmmc1_before_set_reg(struct device *dev,
+				       int power_on, int vdd)
+{
+	u32 reg, prog_io;
+	struct omap_hsmmc_platform_data *mmc = dev->platform_data;
+
+	if (mmc->remux)
+		mmc->remux(dev, power_on);
+
+	/*
+	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
+	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
+	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
+	 *
+	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
+	 * is most naturally TWL VSIM; those pins also use PBIAS.
+	 *
+	 * FIXME handle VMMC1A as needed ...
+	 */
+	if (power_on) {
+		if (cpu_is_omap2430()) {
+			reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
+			if ((1 << vdd) >= MMC_VDD_30_31)
+				reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
+			else
+				reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
+			omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
+		}
+
+		if (mmc->internal_clock) {
+			reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+			reg |= OMAP2_MMCSDIO1ADPCLKISEL;
+			omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
+		}
+
+		reg = omap_ctrl_readl(control_pbias_offset);
+		if (cpu_is_omap3630()) {
+			/* Set MMC I/O to 52Mhz */
+			prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
+			prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
+			omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
+		} else {
+			reg |= OMAP2_PBIASSPEEDCTRL0;
+		}
+		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
+		omap_ctrl_writel(reg, control_pbias_offset);
+	} else {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
+		omap_ctrl_writel(reg, control_pbias_offset);
+	}
+}
+
+static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd)
+{
+	u32 reg;
+
+	/* 100ms delay required for PBIAS configuration */
+	msleep(100);
+
+	if (power_on) {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
+		if ((1 << vdd) <= MMC_VDD_165_195)
+			reg &= ~OMAP2_PBIASLITEVMODE0;
+		else
+			reg |= OMAP2_PBIASLITEVMODE0;
+		omap_ctrl_writel(reg, control_pbias_offset);
+	} else {
+		reg = omap_ctrl_readl(control_pbias_offset);
+		reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
+			OMAP2_PBIASLITEVMODE0);
+		omap_ctrl_writel(reg, control_pbias_offset);
+	}
+}
+
+static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc)
+{
+	u32 reg;
+
+	reg = omap_ctrl_readl(control_devconf1_offset);
+	if (mmc->internal_clock)
+		reg |= OMAP2_MMCSDIO2ADPCLKISEL;
+	else
+		reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
+	omap_ctrl_writel(reg, control_devconf1_offset);
+}
+
+static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd)
+{
+	struct omap_hsmmc_platform_data *mmc = dev->platform_data;
+
+	if (mmc->remux)
+		mmc->remux(dev, power_on);
+
+	if (power_on)
+		hsmmc2_select_input_clk_src(mmc);
+}
+
+static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd)
+{
+	struct omap_hsmmc_platform_data *mmc = dev->platform_data;
+
+	if (power_on)
+		hsmmc2_select_input_clk_src(mmc);
+
+	return 0;
+}
+
+static int nop_mmc_set_power(struct device *dev, int power_on, int vdd)
+{
+	return 0;
+}
+
+static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data
+				  *mmc_controller, int controller_nr)
+{
+	if (gpio_is_valid(mmc_controller->gpio_cd) &&
+	    (mmc_controller->gpio_cd < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->gpio_cd,
+				   OMAP_PIN_INPUT_PULLUP);
+	if (gpio_is_valid(mmc_controller->gpio_cod) &&
+	    (mmc_controller->gpio_cod < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->gpio_cod,
+				   OMAP_PIN_INPUT_PULLUP);
+	if (gpio_is_valid(mmc_controller->gpio_wp) &&
+	    (mmc_controller->gpio_wp < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->gpio_wp,
+				   OMAP_PIN_INPUT_PULLUP);
+	if (cpu_is_omap34xx()) {
+		if (controller_nr == 0) {
+			omap_mux_init_signal("sdmmc1_clk",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc1_cmd",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc1_dat0",
+				OMAP_PIN_INPUT_PULLUP);
+			if (mmc_controller->caps &
+				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
+				omap_mux_init_signal("sdmmc1_dat1",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat2",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat3",
+					OMAP_PIN_INPUT_PULLUP);
+			}
+			if (mmc_controller->caps &
+						MMC_CAP_8_BIT_DATA) {
+				omap_mux_init_signal("sdmmc1_dat4",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat5",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat6",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat7",
+					OMAP_PIN_INPUT_PULLUP);
+			}
+		}
+		if (controller_nr == 1) {
+			/* MMC2 */
+			omap_mux_init_signal("sdmmc2_clk",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc2_cmd",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc2_dat0",
+				OMAP_PIN_INPUT_PULLUP);
+
+			/*
+			 * For 8 wire configurations, Lines DAT4, 5, 6 and 7
+			 * need to be muxed in the board-*.c files
+			 */
+			if (mmc_controller->caps &
+				(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
+				omap_mux_init_signal("sdmmc2_dat1",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat2",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat3",
+					OMAP_PIN_INPUT_PULLUP);
+			}
+			if (mmc_controller->caps &
+							MMC_CAP_8_BIT_DATA) {
+				omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7",
+					OMAP_PIN_INPUT_PULLUP);
+			}
+		}
+
+		/*
+		 * For MMC3 the pins need to be muxed in the board-*.c files
+		 */
+	}
+}
+
+static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
+					struct omap_hsmmc_platform_data *mmc)
+{
+	char *hc_name;
+
+	hc_name = kzalloc(sizeof(char) * (HSMMC_NAME_LEN + 1), GFP_KERNEL);
+	if (!hc_name) {
+		pr_err("Cannot allocate memory for controller slot name\n");
+		kfree(hc_name);
+		return -ENOMEM;
+	}
+
+	if (c->name)
+		strncpy(hc_name, c->name, HSMMC_NAME_LEN);
+	else
+		snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i",
+								c->mmc, 1);
+	mmc->name = hc_name;
+	mmc->caps = c->caps;
+	mmc->internal_clock = !c->ext_clock;
+	mmc->reg_offset = 0;
+
+	if (c->cover_only) {
+		/* detect if mobile phone cover removed */
+		mmc->gpio_cd = -EINVAL;
+		mmc->gpio_cod = c->gpio_cd;
+	} else {
+		/* card detect pin on the mmc socket itself */
+		mmc->gpio_cd = c->gpio_cd;
+		mmc->gpio_cod = -EINVAL;
+	}
+	mmc->gpio_wp = c->gpio_wp;
+
+	mmc->remux = c->remux;
+	mmc->init_card = c->init_card;
+
+	if (c->nonremovable)
+		mmc->nonremovable = 1;
+
+	/*
+	 * NOTE:  MMC slots should have a Vcc regulator set up.
+	 * This may be from a TWL4030-family chip, another
+	 * controllable regulator, or a fixed supply.
+	 *
+	 * temporary HACK: ocr_mask instead of fixed supply
+	 */
+	if (soc_is_am35xx())
+		mmc->ocr_mask = MMC_VDD_165_195 |
+					 MMC_VDD_26_27 |
+					 MMC_VDD_27_28 |
+					 MMC_VDD_29_30 |
+					 MMC_VDD_30_31 |
+					 MMC_VDD_31_32;
+	else
+		mmc->ocr_mask = c->ocr_mask;
+
+	if (!soc_is_am35xx())
+		mmc->features |= HSMMC_HAS_PBIAS;
+
+	switch (c->mmc) {
+	case 1:
+		if (mmc->features & HSMMC_HAS_PBIAS) {
+			/* on-chip level shifting via PBIAS0/PBIAS1 */
+			mmc->before_set_reg =
+					omap_hsmmc1_before_set_reg;
+			mmc->after_set_reg =
+					omap_hsmmc1_after_set_reg;
+		}
+
+		if (soc_is_am35xx())
+			mmc->set_power = nop_mmc_set_power;
+
+		/* OMAP3630 HSMMC1 supports only 4-bit */
+		if (cpu_is_omap3630() &&
+				(c->caps & MMC_CAP_8_BIT_DATA)) {
+			c->caps &= ~MMC_CAP_8_BIT_DATA;
+			c->caps |= MMC_CAP_4_BIT_DATA;
+			mmc->caps = c->caps;
+		}
+		break;
+	case 2:
+		if (soc_is_am35xx())
+			mmc->set_power = am35x_hsmmc2_set_power;
+
+		if (c->ext_clock)
+			c->transceiver = 1;
+		if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
+			c->caps &= ~MMC_CAP_8_BIT_DATA;
+			c->caps |= MMC_CAP_4_BIT_DATA;
+		}
+		if (mmc->features & HSMMC_HAS_PBIAS) {
+			/* off-chip level shifting, or none */
+			mmc->before_set_reg = hsmmc2_before_set_reg;
+			mmc->after_set_reg = NULL;
+		}
+		break;
+	case 3:
+	case 4:
+	case 5:
+		mmc->before_set_reg = NULL;
+		mmc->after_set_reg = NULL;
+		break;
+	default:
+		pr_err("MMC%d configuration not supported!\n", c->mmc);
+		kfree(hc_name);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int omap_hsmmc_done;
+
+void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
+{
+	struct platform_device *pdev;
+	struct omap_hsmmc_platform_data *mmc_pdata;
+	int res;
+
+	if (omap_hsmmc_done != 1)
+		return;
+
+	omap_hsmmc_done++;
+
+	for (; c->mmc; c++) {
+		if (!c->deferred)
+			continue;
+
+		pdev = c->pdev;
+		if (!pdev)
+			continue;
+
+		mmc_pdata = pdev->dev.platform_data;
+		if (!mmc_pdata)
+			continue;
+
+		if (c->cover_only) {
+			/* detect if mobile phone cover removed */
+			mmc_pdata->gpio_cd = -EINVAL;
+			mmc_pdata->gpio_cod = c->gpio_cd;
+		} else {
+			/* card detect pin on the mmc socket itself */
+			mmc_pdata->gpio_cd = c->gpio_cd;
+			mmc_pdata->gpio_cod = -EINVAL;
+		}
+		mmc_pdata->gpio_wp = c->gpio_wp;
+
+		res = omap_device_register(pdev);
+		if (res)
+			pr_err("Could not late init MMC %s\n",
+			       c->name);
+	}
+}
+
+#define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
+
+static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
+					int ctrl_nr)
+{
+	struct omap_hwmod *oh;
+	struct omap_hwmod *ohs[1];
+	struct omap_device *od;
+	struct platform_device *pdev;
+	char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
+	struct omap_hsmmc_platform_data *mmc_data;
+	struct omap_hsmmc_dev_attr *mmc_dev_attr;
+	char *name;
+	int res;
+
+	mmc_data = kzalloc(sizeof(*mmc_data), GFP_KERNEL);
+	if (!mmc_data) {
+		pr_err("Cannot allocate memory for mmc device!\n");
+		return;
+	}
+
+	res = omap_hsmmc_pdata_init(hsmmcinfo, mmc_data);
+	if (res < 0)
+		goto free_mmc;
+
+	omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
+
+	name = "omap_hsmmc";
+	res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
+		     "mmc%d", ctrl_nr);
+	WARN(res >= MAX_OMAP_MMC_HWMOD_NAME_LEN,
+	     "String buffer overflow in MMC%d device setup\n", ctrl_nr);
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("Could not look up %s\n", oh_name);
+		goto free_name;
+	}
+	ohs[0] = oh;
+	if (oh->dev_attr != NULL) {
+		mmc_dev_attr = oh->dev_attr;
+		mmc_data->controller_flags = mmc_dev_attr->flags;
+		/*
+		 * erratum 2.1.1.128 doesn't apply if board has
+		 * a transceiver is attached
+		 */
+		if (hsmmcinfo->transceiver)
+			mmc_data->controller_flags &=
+				~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ;
+	}
+
+	pdev = platform_device_alloc(name, ctrl_nr - 1);
+	if (!pdev) {
+		pr_err("Could not allocate pdev for %s\n", name);
+		goto free_name;
+	}
+	dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
+
+	od = omap_device_alloc(pdev, ohs, 1);
+	if (IS_ERR(od)) {
+		pr_err("Could not allocate od for %s\n", name);
+		goto put_pdev;
+	}
+
+	res = platform_device_add_data(pdev, mmc_data,
+			      sizeof(struct omap_hsmmc_platform_data));
+	if (res) {
+		pr_err("Could not add pdata for %s\n", name);
+		goto put_pdev;
+	}
+
+	hsmmcinfo->pdev = pdev;
+
+	if (hsmmcinfo->deferred)
+		goto free_mmc;
+
+	res = omap_device_register(pdev);
+	if (res) {
+		pr_err("Could not register od for %s\n", name);
+		goto free_od;
+	}
+
+	goto free_mmc;
+
+free_od:
+	omap_device_delete(od);
+
+put_pdev:
+	platform_device_put(pdev);
+
+free_name:
+	kfree(mmc_data->name);
+
+free_mmc:
+	kfree(mmc_data);
+}
+
+void __init omap_hsmmc_init(struct omap2_hsmmc_info *controllers)
+{
+	if (omap_hsmmc_done)
+		return;
+
+	omap_hsmmc_done = 1;
+
+	if (cpu_is_omap2430()) {
+		control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
+		control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1;
+	} else {
+		control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE;
+		control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1;
+	}
+
+	for (; controllers->mmc; controllers++)
+		omap_hsmmc_init_one(controllers, controllers->mmc);
+
+}
+
+#endif