Initial import

10 files changed, 880 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
new file mode 100644
index 000000000..c9b95325b
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <linux/serial_s3c.h>
+#include <mach/map.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rp, rv, tmp
+		ldr	\rp, = S3C_PA_UART
+		ldr	\rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <debug/samsung.S>
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
new file mode 100644
index 000000000..096e14073
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#define S3C64XX_DMA_CHAN(name)		((unsigned long)(name))
+
+/* DMA0/SDMA0 */
+#define DMACH_UART0		S3C64XX_DMA_CHAN("uart0_tx")
+#define DMACH_UART0_SRC2	S3C64XX_DMA_CHAN("uart0_rx")
+#define DMACH_UART1		S3C64XX_DMA_CHAN("uart1_tx")
+#define DMACH_UART1_SRC2	S3C64XX_DMA_CHAN("uart1_rx")
+#define DMACH_UART2		S3C64XX_DMA_CHAN("uart2_tx")
+#define DMACH_UART2_SRC2	S3C64XX_DMA_CHAN("uart2_rx")
+#define DMACH_UART3		S3C64XX_DMA_CHAN("uart3_tx")
+#define DMACH_UART3_SRC2	S3C64XX_DMA_CHAN("uart3_rx")
+#define DMACH_PCM0_TX		S3C64XX_DMA_CHAN("pcm0_tx")
+#define DMACH_PCM0_RX		S3C64XX_DMA_CHAN("pcm0_rx")
+#define DMACH_I2S0_OUT		S3C64XX_DMA_CHAN("i2s0_tx")
+#define DMACH_I2S0_IN		S3C64XX_DMA_CHAN("i2s0_rx")
+#define DMACH_SPI0_TX		S3C64XX_DMA_CHAN("spi0_tx")
+#define DMACH_SPI0_RX		S3C64XX_DMA_CHAN("spi0_rx")
+#define DMACH_HSI_I2SV40_TX	S3C64XX_DMA_CHAN("i2s2_tx")
+#define DMACH_HSI_I2SV40_RX	S3C64XX_DMA_CHAN("i2s2_rx")
+
+/* DMA1/SDMA1 */
+#define DMACH_PCM1_TX		S3C64XX_DMA_CHAN("pcm1_tx")
+#define DMACH_PCM1_RX		S3C64XX_DMA_CHAN("pcm1_rx")
+#define DMACH_I2S1_OUT		S3C64XX_DMA_CHAN("i2s1_tx")
+#define DMACH_I2S1_IN		S3C64XX_DMA_CHAN("i2s1_rx")
+#define DMACH_SPI1_TX		S3C64XX_DMA_CHAN("spi1_tx")
+#define DMACH_SPI1_RX		S3C64XX_DMA_CHAN("spi1_rx")
+#define DMACH_AC97_PCMOUT	S3C64XX_DMA_CHAN("ac97_out")
+#define DMACH_AC97_PCMIN	S3C64XX_DMA_CHAN("ac97_in")
+#define DMACH_AC97_MICIN	S3C64XX_DMA_CHAN("ac97_mic")
+#define DMACH_PWM		S3C64XX_DMA_CHAN("pwm")
+#define DMACH_IRDA		S3C64XX_DMA_CHAN("irda")
+#define DMACH_EXTERNAL		S3C64XX_DMA_CHAN("external")
+#define DMACH_SECURITY_RX	S3C64XX_DMA_CHAN("sec_rx")
+#define DMACH_SECURITY_TX	S3C64XX_DMA_CHAN("sec_tx")
+
+enum dma_ch {
+	DMACH_MAX = 32
+};
+
+#include <linux/amba/pl08x.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
new file mode 100644
index 000000000..9c81fac3b
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C6400 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef GPIO_SAMSUNG_S3C64XX_H
+#define GPIO_SAMSUNG_S3C64XX_H
+
+/* GPIO bank sizes */
+#define S3C64XX_GPIO_A_NR	(8)
+#define S3C64XX_GPIO_B_NR	(7)
+#define S3C64XX_GPIO_C_NR	(8)
+#define S3C64XX_GPIO_D_NR	(5)
+#define S3C64XX_GPIO_E_NR	(5)
+#define S3C64XX_GPIO_F_NR	(16)
+#define S3C64XX_GPIO_G_NR	(7)
+#define S3C64XX_GPIO_H_NR	(10)
+#define S3C64XX_GPIO_I_NR	(16)
+#define S3C64XX_GPIO_J_NR	(12)
+#define S3C64XX_GPIO_K_NR	(16)
+#define S3C64XX_GPIO_L_NR	(15)
+#define S3C64XX_GPIO_M_NR	(6)
+#define S3C64XX_GPIO_N_NR	(16)
+#define S3C64XX_GPIO_O_NR	(16)
+#define S3C64XX_GPIO_P_NR	(15)
+#define S3C64XX_GPIO_Q_NR	(9)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S3C64XX_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+	S3C64XX_GPIO_A_START = 0,
+	S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A),
+	S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B),
+	S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C),
+	S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D),
+	S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E),
+	S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F),
+	S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G),
+	S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H),
+	S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I),
+	S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J),
+	S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K),
+	S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L),
+	S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M),
+	S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N),
+	S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O),
+	S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P),
+};
+
+/* S3C64XX GPIO number definitions. */
+
+#define S3C64XX_GPA(_nr)	(S3C64XX_GPIO_A_START + (_nr))
+#define S3C64XX_GPB(_nr)	(S3C64XX_GPIO_B_START + (_nr))
+#define S3C64XX_GPC(_nr)	(S3C64XX_GPIO_C_START + (_nr))
+#define S3C64XX_GPD(_nr)	(S3C64XX_GPIO_D_START + (_nr))
+#define S3C64XX_GPE(_nr)	(S3C64XX_GPIO_E_START + (_nr))
+#define S3C64XX_GPF(_nr)	(S3C64XX_GPIO_F_START + (_nr))
+#define S3C64XX_GPG(_nr)	(S3C64XX_GPIO_G_START + (_nr))
+#define S3C64XX_GPH(_nr)	(S3C64XX_GPIO_H_START + (_nr))
+#define S3C64XX_GPI(_nr)	(S3C64XX_GPIO_I_START + (_nr))
+#define S3C64XX_GPJ(_nr)	(S3C64XX_GPIO_J_START + (_nr))
+#define S3C64XX_GPK(_nr)	(S3C64XX_GPIO_K_START + (_nr))
+#define S3C64XX_GPL(_nr)	(S3C64XX_GPIO_L_START + (_nr))
+#define S3C64XX_GPM(_nr)	(S3C64XX_GPIO_M_START + (_nr))
+#define S3C64XX_GPN(_nr)	(S3C64XX_GPIO_N_START + (_nr))
+#define S3C64XX_GPO(_nr)	(S3C64XX_GPIO_O_START + (_nr))
+#define S3C64XX_GPP(_nr)	(S3C64XX_GPIO_P_START + (_nr))
+#define S3C64XX_GPQ(_nr)	(S3C64XX_GPIO_Q_START + (_nr))
+
+/* the end of the S3C64XX specific gpios */
+#define S3C64XX_GPIO_END	(S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define S3C_GPIO_END		S3C64XX_GPIO_END
+
+/* define the number of gpios we need to the one after the GPQ() range */
+#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+
+#endif /* GPIO_SAMSUNG_S3C64XX_H */
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/hardware.h b/arch/arm/mach-s3c64xx/include/mach/hardware.h
new file mode 100644
index 000000000..862d033e5
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/hardware.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
new file mode 100644
index 000000000..67bbd1dd0
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -0,0 +1,185 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - IRQ support
+ */
+
+#ifndef __ASM_MACH_S3C64XX_IRQS_H
+#define __ASM_MACH_S3C64XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET	(32)
+
+#define S3C_IRQ(x)	((x) + S3C_IRQ_OFFSET)
+
+#define IRQ_VIC0_BASE	S3C_IRQ(0)
+#define IRQ_VIC1_BASE	S3C_IRQ(32)
+
+/* VIC based IRQs */
+
+#define S3C64XX_IRQ_VIC0(x)	(IRQ_VIC0_BASE + (x))
+#define S3C64XX_IRQ_VIC1(x)	(IRQ_VIC1_BASE + (x))
+
+/* VIC0 */
+
+#define IRQ_EINT0_3		S3C64XX_IRQ_VIC0(0)
+#define IRQ_EINT4_11		S3C64XX_IRQ_VIC0(1)
+#define IRQ_RTC_TIC		S3C64XX_IRQ_VIC0(2)
+#define IRQ_CAMIF_C		S3C64XX_IRQ_VIC0(3)
+#define IRQ_CAMIF_P		S3C64XX_IRQ_VIC0(4)
+#define IRQ_CAMIF_MC		S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIC1	S3C64XX_IRQ_VIC0(5)
+#define IRQ_S3C6410_IIS		S3C64XX_IRQ_VIC0(6)
+#define IRQ_S3C6400_CAMIF_MP	S3C64XX_IRQ_VIC0(6)
+#define IRQ_CAMIF_WE_C		S3C64XX_IRQ_VIC0(7)
+#define IRQ_S3C6410_G3D		S3C64XX_IRQ_VIC0(8)
+#define IRQ_S3C6400_CAMIF_WE_P	S3C64XX_IRQ_VIC0(8)
+#define IRQ_POST0		S3C64XX_IRQ_VIC0(9)
+#define IRQ_ROTATOR		S3C64XX_IRQ_VIC0(10)
+#define IRQ_2D			S3C64XX_IRQ_VIC0(11)
+#define IRQ_TVENC		S3C64XX_IRQ_VIC0(12)
+#define IRQ_SCALER		S3C64XX_IRQ_VIC0(13)
+#define IRQ_BATF		S3C64XX_IRQ_VIC0(14)
+#define IRQ_JPEG		S3C64XX_IRQ_VIC0(15)
+#define IRQ_MFC			S3C64XX_IRQ_VIC0(16)
+#define IRQ_SDMA0		S3C64XX_IRQ_VIC0(17)
+#define IRQ_SDMA1		S3C64XX_IRQ_VIC0(18)
+#define IRQ_ARM_DMAERR		S3C64XX_IRQ_VIC0(19)
+#define IRQ_ARM_DMA		S3C64XX_IRQ_VIC0(20)
+#define IRQ_ARM_DMAS		S3C64XX_IRQ_VIC0(21)
+#define IRQ_KEYPAD		S3C64XX_IRQ_VIC0(22)
+#define IRQ_TIMER0_VIC		S3C64XX_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC		S3C64XX_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC		S3C64XX_IRQ_VIC0(25)
+#define IRQ_WDT			S3C64XX_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC		S3C64XX_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC		S3C64XX_IRQ_VIC0(28)
+#define IRQ_LCD_FIFO		S3C64XX_IRQ_VIC0(29)
+#define IRQ_LCD_VSYNC		S3C64XX_IRQ_VIC0(30)
+#define IRQ_LCD_SYSTEM		S3C64XX_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_19		S3C64XX_IRQ_VIC1(0)
+#define IRQ_EINT20_27		S3C64XX_IRQ_VIC1(1)
+#define IRQ_PCM0		S3C64XX_IRQ_VIC1(2)
+#define IRQ_PCM1		S3C64XX_IRQ_VIC1(3)
+#define IRQ_AC97		S3C64XX_IRQ_VIC1(4)
+#define IRQ_UART0		S3C64XX_IRQ_VIC1(5)
+#define IRQ_UART1		S3C64XX_IRQ_VIC1(6)
+#define IRQ_UART2		S3C64XX_IRQ_VIC1(7)
+#define IRQ_UART3		S3C64XX_IRQ_VIC1(8)
+#define IRQ_DMA0		S3C64XX_IRQ_VIC1(9)
+#define IRQ_DMA1		S3C64XX_IRQ_VIC1(10)
+#define IRQ_ONENAND0		S3C64XX_IRQ_VIC1(11)
+#define IRQ_ONENAND1		S3C64XX_IRQ_VIC1(12)
+#define IRQ_NFC			S3C64XX_IRQ_VIC1(13)
+#define IRQ_CFCON		S3C64XX_IRQ_VIC1(14)
+#define IRQ_USBH		S3C64XX_IRQ_VIC1(15)
+#define IRQ_SPI0		S3C64XX_IRQ_VIC1(16)
+#define IRQ_SPI1		S3C64XX_IRQ_VIC1(17)
+#define IRQ_IIC			S3C64XX_IRQ_VIC1(18)
+#define IRQ_HSItx		S3C64XX_IRQ_VIC1(19)
+#define IRQ_HSIrx		S3C64XX_IRQ_VIC1(20)
+#define IRQ_RESERVED		S3C64XX_IRQ_VIC1(21)
+#define IRQ_MSM			S3C64XX_IRQ_VIC1(22)
+#define IRQ_HOSTIF		S3C64XX_IRQ_VIC1(23)
+#define IRQ_HSMMC0		S3C64XX_IRQ_VIC1(24)
+#define IRQ_HSMMC1		S3C64XX_IRQ_VIC1(25)
+#define IRQ_HSMMC2		IRQ_SPI1	/* shared with SPI1 */
+#define IRQ_OTG			S3C64XX_IRQ_VIC1(26)
+#define IRQ_IRDA		S3C64XX_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM		S3C64XX_IRQ_VIC1(28)
+#define IRQ_SEC			S3C64XX_IRQ_VIC1(29)
+#define IRQ_PENDN		S3C64XX_IRQ_VIC1(30)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_ADC			S3C64XX_IRQ_VIC1(31)
+
+/* compatibility for device defines */
+
+#define IRQ_IIC1		IRQ_S3C6410_IIC1
+
+/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
+ * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
+ * which we place after the pair of VICs. */
+
+#define S3C_IRQ_EINT_BASE	S3C_IRQ(64+5)
+
+#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x)		S3C_EINT(x)
+#define IRQ_EINT_BIT(x)		((x) - S3C_EINT(0))
+
+/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+#define IRQ_EINT_GROUP1_NR	(15)
+#define IRQ_EINT_GROUP2_NR	(8)
+#define IRQ_EINT_GROUP3_NR	(5)
+#define IRQ_EINT_GROUP4_NR	(14)
+#define IRQ_EINT_GROUP5_NR	(7)
+#define IRQ_EINT_GROUP6_NR	(10)
+#define IRQ_EINT_GROUP7_NR	(16)
+#define IRQ_EINT_GROUP8_NR	(15)
+#define IRQ_EINT_GROUP9_NR	(9)
+
+#define IRQ_EINT_GROUP_BASE	S3C_EINT(28)
+#define IRQ_EINT_GROUP1_BASE	(IRQ_EINT_GROUP_BASE + 0x00)
+#define IRQ_EINT_GROUP2_BASE	(IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP3_BASE	(IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP4_BASE	(IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
+#define IRQ_EINT_GROUP5_BASE	(IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
+#define IRQ_EINT_GROUP6_BASE	(IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP7_BASE	(IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+#define IRQ_EINT_GROUP8_BASE	(IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
+#define IRQ_EINT_GROUP9_BASE	(IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
+
+#define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##_BASE + (no))
+
+/* Define a group of interrupts for board-specific use (eg, for MFD
+ * interrupt controllers). */
+#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+#ifdef CONFIG_MACH_WLF_CRAGG_6410
+#define IRQ_BOARD_NR 160
+#elif defined(CONFIG_SMDK6410_WM1190_EV1)
+#define IRQ_BOARD_NR 64
+#elif defined(CONFIG_SMDK6410_WM1192_EV1)
+#define IRQ_BOARD_NR 64
+#else
+#define IRQ_BOARD_NR 16
+#endif
+
+#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS	(IRQ_BOARD_END + 1)
+
+/* Compatibility */
+
+#define IRQ_ONENAND	IRQ_ONENAND0
+#define IRQ_I2S0	IRQ_S3C6410_IIS
+
+#endif /* __ASM_MACH_S3C64XX_IRQS_H */
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
new file mode 100644
index 000000000..f55ccb1ce
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -0,0 +1,126 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/map.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s3c.h>
+
+/*
+ * Post-mux Chip Select Regions Xm0CSn_
+ * These may be used by SROM, NAND or CF depending on settings
+ */
+
+#define S3C64XX_PA_XM0CSN0 (0x10000000)
+#define S3C64XX_PA_XM0CSN1 (0x18000000)
+#define S3C64XX_PA_XM0CSN2 (0x20000000)
+#define S3C64XX_PA_XM0CSN3 (0x28000000)
+#define S3C64XX_PA_XM0CSN4 (0x30000000)
+#define S3C64XX_PA_XM0CSN5 (0x38000000)
+
+/* HSMMC units */
+#define S3C64XX_PA_HSMMC(x)	(0x7C200000 + ((x) * 0x100000))
+#define S3C64XX_PA_HSMMC0	S3C64XX_PA_HSMMC(0)
+#define S3C64XX_PA_HSMMC1	S3C64XX_PA_HSMMC(1)
+#define S3C64XX_PA_HSMMC2	S3C64XX_PA_HSMMC(2)
+
+#define S3C_PA_UART		(0x7F005000)
+#define S3C_PA_UART0		(S3C_PA_UART + 0x00)
+#define S3C_PA_UART1		(S3C_PA_UART + 0x400)
+#define S3C_PA_UART2		(S3C_PA_UART + 0x800)
+#define S3C_PA_UART3		(S3C_PA_UART + 0xC00)
+#define S3C_UART_OFFSET		(0x400)
+
+/* See notes on UART VA mapping in debug-macro.S */
+#define S3C_VA_UARTx(x)	(S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET))
+
+#define S3C_VA_UART0		S3C_VA_UARTx(0)
+#define S3C_VA_UART1		S3C_VA_UARTx(1)
+#define S3C_VA_UART2		S3C_VA_UARTx(2)
+#define S3C_VA_UART3		S3C_VA_UARTx(3)
+
+#define S3C64XX_PA_SROM		(0x70000000)
+
+#define S3C64XX_PA_ONENAND0	(0x70100000)
+#define S3C64XX_PA_ONENAND0_BUF	(0x20000000)
+#define S3C64XX_SZ_ONENAND0_BUF (SZ_64M)
+
+/* NAND and OneNAND1 controllers occupy the same register region
+   (depending on SoC POP version) */
+#define S3C64XX_PA_ONENAND1	(0x70200000)
+#define S3C64XX_PA_ONENAND1_BUF	(0x28000000)
+#define S3C64XX_SZ_ONENAND1_BUF	(SZ_64M)
+
+#define S3C64XX_PA_NAND		(0x70200000)
+#define S3C64XX_PA_FB		(0x77100000)
+#define S3C64XX_PA_USB_HSOTG	(0x7C000000)
+#define S3C64XX_PA_WATCHDOG	(0x7E004000)
+#define S3C64XX_PA_RTC		(0x7E005000)
+#define S3C64XX_PA_KEYPAD	(0x7E00A000)
+#define S3C64XX_PA_ADC		(0x7E00B000)
+#define S3C64XX_PA_SYSCON	(0x7E00F000)
+#define S3C64XX_PA_AC97		(0x7F001000)
+#define S3C64XX_PA_IIS0		(0x7F002000)
+#define S3C64XX_PA_IIS1		(0x7F003000)
+#define S3C64XX_PA_TIMER	(0x7F006000)
+#define S3C64XX_PA_IIC0		(0x7F004000)
+#define S3C64XX_PA_SPI0		(0x7F00B000)
+#define S3C64XX_PA_SPI1		(0x7F00C000)
+#define S3C64XX_PA_PCM0		(0x7F009000)
+#define S3C64XX_PA_PCM1		(0x7F00A000)
+#define S3C64XX_PA_IISV4	(0x7F00D000)
+#define S3C64XX_PA_IIC1		(0x7F00F000)
+
+#define S3C64XX_PA_GPIO		(0x7F008000)
+#define S3C64XX_SZ_GPIO		SZ_4K
+
+#define S3C64XX_PA_SDRAM	(0x50000000)
+
+#define S3C64XX_PA_CFCON	(0x70300000)
+
+#define S3C64XX_PA_VIC0		(0x71200000)
+#define S3C64XX_PA_VIC1		(0x71300000)
+
+#define S3C64XX_PA_MODEM	(0x74108000)
+
+#define S3C64XX_PA_USBHOST	(0x74300000)
+
+#define S3C64XX_PA_USB_HSPHY	(0x7C100000)
+
+/* compatibiltiy defines. */
+#define S3C_PA_TIMER		S3C64XX_PA_TIMER
+#define S3C_PA_HSMMC0		S3C64XX_PA_HSMMC0
+#define S3C_PA_HSMMC1		S3C64XX_PA_HSMMC1
+#define S3C_PA_HSMMC2		S3C64XX_PA_HSMMC2
+#define S3C_PA_IIC		S3C64XX_PA_IIC0
+#define S3C_PA_IIC1		S3C64XX_PA_IIC1
+#define S3C_PA_NAND		S3C64XX_PA_NAND
+#define S3C_PA_ONENAND		S3C64XX_PA_ONENAND0
+#define S3C_PA_ONENAND_BUF	S3C64XX_PA_ONENAND0_BUF
+#define S3C_SZ_ONENAND_BUF	S3C64XX_SZ_ONENAND0_BUF
+#define S3C_PA_FB		S3C64XX_PA_FB
+#define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
+#define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
+#define S3C_PA_RTC		S3C64XX_PA_RTC
+#define S3C_PA_WDT		S3C64XX_PA_WATCHDOG
+#define S3C_PA_SPI0		S3C64XX_PA_SPI0
+#define S3C_PA_SPI1		S3C64XX_PA_SPI1
+
+#define SAMSUNG_PA_ADC		S3C64XX_PA_ADC
+#define SAMSUNG_PA_CFCON	S3C64XX_PA_CFCON
+#define SAMSUNG_PA_KEYPAD	S3C64XX_PA_KEYPAD
+#define SAMSUNG_PA_TIMER	S3C64XX_PA_TIMER
+
+#endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
new file mode 100644
index 000000000..a30a1e3ff
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -0,0 +1,121 @@
+/* linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_S3C64XX_PM_CORE_H
+#define __MACH_S3C64XX_PM_CORE_H __FILE__
+
+#include <linux/serial_s3c.h>
+
+#include <mach/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	u32 tmp = __raw_readl(S3C_PCLK_GATE);
+
+	/* As a note, since the S3C64XX UARTs generally have multiple
+	 * clock sources, we simply enable PCLK at the moment and hope
+	 * that the resume settings for the UART are suitable for the
+	 * use with PCLK.
+	 */
+
+	tmp |= S3C_CLKCON_PCLK_UART0;
+	tmp |= S3C_CLKCON_PCLK_UART1;
+	tmp |= S3C_CLKCON_PCLK_UART2;
+	tmp |= S3C_CLKCON_PCLK_UART3;
+
+	__raw_writel(tmp, S3C_PCLK_GATE);
+	udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	/* VIC should have already been taken care of */
+
+	/* clear any pending EINT0 interrupts */
+	__raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+}
+
+/* make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on */
+
+#define s3c_irqwake_eintallow	((1 << 28) - 1)
+#define s3c_irqwake_intallow	(~0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+	u32 ucon = __raw_readl(regs + S3C2410_UCON);
+	u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+	u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+	u32 new_ucon;
+	u32 delta;
+
+	/* S3C64XX UART blocks only support level interrupts, so ensure that
+	 * when we restore unused UART blocks we force the level interrupt
+	 * settigs. */
+	save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+	/* We have a constraint on changing the clock type of the UART
+	 * between UCLKx and PCLK, so ensure that when we restore UCON
+	 * that the CLK field is correctly modified if the bootloader
+	 * has changed anything.
+	 */
+	if (ucon_clk != save_clk) {
+		new_ucon = save->ucon;
+		delta = ucon_clk ^ save_clk;
+
+		/* change from UCLKx => wrong PCLK,
+		 * either UCLK can be tested for by a bit-test
+		 * with UCLK0 */
+		if (ucon_clk & S3C6400_UCON_UCLK0 &&
+		    !(save_clk & S3C6400_UCON_UCLK0) &&
+		    delta & S3C6400_UCON_PCLK2) {
+			new_ucon &= ~S3C6400_UCON_UCLK0;
+		} else if (delta == S3C6400_UCON_PCLK2) {
+			/* as an precaution, don't change from
+			 * PCLK2 => PCLK or vice-versa */
+			new_ucon ^= S3C6400_UCON_PCLK2;
+		}
+
+		S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+			  ucon, new_ucon, save->ucon);
+		save->ucon = new_ucon;
+	}
+}
+
+static inline void s3c_pm_restored_gpios(void)
+{
+	/* ensure sleep mode has been cleared from the system */
+
+	__raw_writel(0, S3C64XX_SLPEN);
+}
+
+static inline void samsung_pm_saved_gpios(void)
+{
+	/* turn on the sleep mode and keep it there, as it seems that during
+	 * suspend the xCON registers get re-set and thus you can end up with
+	 * problems between going to sleep and resuming.
+	 */
+
+	__raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN);
+}
+#endif /* __MACH_S3C64XX_PM_CORE_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
new file mode 100644
index 000000000..4f44aac77
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -0,0 +1,38 @@
+/* arch/arm/plat-s3c64xx/include/plat/regs-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+/*
+ * FIXME: Remove remaining definitions
+ */
+
+#define S3C_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S3C_PCLK_GATE		S3C_CLKREG(0x34)
+#define S3C6410_CLK_SRC2	S3C_CLKREG(0x10C)
+#define S3C_MEM_SYS_CFG		S3C_CLKREG(0x120)
+
+/* PCLK GATE Registers */
+#define S3C_CLKCON_PCLK_UART3		(1<<4)
+#define S3C_CLKCON_PCLK_UART2		(1<<3)
+#define S3C_CLKCON_PCLK_UART1		(1<<2)
+#define S3C_CLKCON_PCLK_UART0		(1<<1)
+
+/* MEM_SYS_CFG */
+#define MEM_SYS_CFG_INDEP_CF		0x4000
+#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON	0x30
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
new file mode 100644
index 000000000..81f7f6e68
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
@@ -0,0 +1,187 @@
+/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - GPIO register definitions
+ */
+
+#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_H
+#define __ASM_PLAT_S3C64XX_REGS_GPIO_H __FILE__
+
+/* Base addresses for each of the banks */
+
+#define S3C64XX_GPIOREG(reg)	(S3C64XX_VA_GPIO + (reg))
+
+#define S3C64XX_GPA_BASE	S3C64XX_GPIOREG(0x0000)
+#define S3C64XX_GPB_BASE	S3C64XX_GPIOREG(0x0020)
+#define S3C64XX_GPC_BASE	S3C64XX_GPIOREG(0x0040)
+#define S3C64XX_GPD_BASE	S3C64XX_GPIOREG(0x0060)
+#define S3C64XX_GPE_BASE	S3C64XX_GPIOREG(0x0080)
+#define S3C64XX_GPF_BASE	S3C64XX_GPIOREG(0x00A0)
+#define S3C64XX_GPG_BASE	S3C64XX_GPIOREG(0x00C0)
+#define S3C64XX_GPH_BASE	S3C64XX_GPIOREG(0x00E0)
+#define S3C64XX_GPI_BASE	S3C64XX_GPIOREG(0x0100)
+#define S3C64XX_GPJ_BASE	S3C64XX_GPIOREG(0x0120)
+#define S3C64XX_GPK_BASE	S3C64XX_GPIOREG(0x0800)
+#define S3C64XX_GPL_BASE	S3C64XX_GPIOREG(0x0810)
+#define S3C64XX_GPM_BASE	S3C64XX_GPIOREG(0x0820)
+#define S3C64XX_GPN_BASE	S3C64XX_GPIOREG(0x0830)
+#define S3C64XX_GPO_BASE	S3C64XX_GPIOREG(0x0140)
+#define S3C64XX_GPP_BASE	S3C64XX_GPIOREG(0x0160)
+#define S3C64XX_GPQ_BASE	S3C64XX_GPIOREG(0x0180)
+
+/* SPCON */
+
+#define S3C64XX_SPCON		S3C64XX_GPIOREG(0x1A0)
+
+#define S3C64XX_SPCON_DRVCON_CAM_MASK		(0x3 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_SHIFT		(30)
+#define S3C64XX_SPCON_DRVCON_CAM_2mA		(0x0 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_4mA		(0x1 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_7mA		(0x2 << 30)
+#define S3C64XX_SPCON_DRVCON_CAM_9mA		(0x3 << 30)
+
+#define S3C64XX_SPCON_DRVCON_HSSPI_MASK		(0x3 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_SHIFT	(28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_2mA		(0x0 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_4mA		(0x1 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_7mA		(0x2 << 28)
+#define S3C64XX_SPCON_DRVCON_HSSPI_9mA		(0x3 << 28)
+
+#define S3C64XX_SPCON_DRVCON_HSMMC_MASK		(0x3 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_SHIFT	(26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_2mA		(0x0 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_4mA		(0x1 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_7mA		(0x2 << 26)
+#define S3C64XX_SPCON_DRVCON_HSMMC_9mA		(0x3 << 26)
+
+#define S3C64XX_SPCON_DRVCON_LCD_MASK		(0x3 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_SHIFT		(24)
+#define S3C64XX_SPCON_DRVCON_LCD_2mA		(0x0 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_4mA		(0x1 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_7mA		(0x2 << 24)
+#define S3C64XX_SPCON_DRVCON_LCD_9mA		(0x3 << 24)
+
+#define S3C64XX_SPCON_DRVCON_MODEM_MASK		(0x3 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_SHIFT	(22)
+#define S3C64XX_SPCON_DRVCON_MODEM_2mA		(0x0 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_4mA		(0x1 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_7mA		(0x2 << 22)
+#define S3C64XX_SPCON_DRVCON_MODEM_9mA		(0x3 << 22)
+
+#define S3C64XX_SPCON_nRSTOUT_OEN		(1 << 21)
+
+#define S3C64XX_SPCON_DRVCON_SPICLK1_MASK	(0x3 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_SHIFT	(18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_2mA	(0x0 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_4mA	(0x1 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_7mA	(0x2 << 18)
+#define S3C64XX_SPCON_DRVCON_SPICLK1_9mA	(0x3 << 18)
+
+#define S3C64XX_SPCON_MEM1_DQS_PUD_MASK		(0x3 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_SHIFT	(16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_DISABLED	(0x0 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_DOWN		(0x1 << 16)
+#define S3C64XX_SPCON_MEM1_DQS_PUD_UP		(0x2 << 16)
+
+#define S3C64XX_SPCON_MEM1_D_PUD1_MASK		(0x3 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_SHIFT		(14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_DISABLED	(0x0 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_DOWN		(0x1 << 14)
+#define S3C64XX_SPCON_MEM1_D_PUD1_UP		(0x2 << 14)
+
+#define S3C64XX_SPCON_MEM1_D_PUD0_MASK		(0x3 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_SHIFT		(12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_DISABLED	(0x0 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_DOWN		(0x1 << 12)
+#define S3C64XX_SPCON_MEM1_D_PUD0_UP		(0x2 << 12)
+
+#define S3C64XX_SPCON_MEM0_D_PUD_MASK		(0x3 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_SHIFT		(8)
+#define S3C64XX_SPCON_MEM0_D_PUD_DISABLED	(0x0 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_DOWN		(0x1 << 8)
+#define S3C64XX_SPCON_MEM0_D_PUD_UP		(0x2 << 8)
+
+#define S3C64XX_SPCON_USBH_DMPD			(1 << 7)
+#define S3C64XX_SPCON_USBH_DPPD			(1 << 6)
+#define S3C64XX_SPCON_USBH_PUSW2		(1 << 5)
+#define S3C64XX_SPCON_USBH_PUSW1		(1 << 4)
+#define S3C64XX_SPCON_USBH_SUSPND		(1 << 3)
+
+#define S3C64XX_SPCON_LCD_SEL_MASK		(0x3 << 0)
+#define S3C64XX_SPCON_LCD_SEL_SHIFT		(0)
+#define S3C64XX_SPCON_LCD_SEL_HOST		(0x0 << 0)
+#define S3C64XX_SPCON_LCD_SEL_RGB		(0x1 << 0)
+#define S3C64XX_SPCON_LCD_SEL_606_656		(0x2 << 0)
+
+
+/* External interrupt registers */
+
+#define S3C64XX_EINT12CON	S3C64XX_GPIOREG(0x200)
+#define S3C64XX_EINT34CON	S3C64XX_GPIOREG(0x204)
+#define S3C64XX_EINT56CON	S3C64XX_GPIOREG(0x208)
+#define S3C64XX_EINT78CON	S3C64XX_GPIOREG(0x20C)
+#define S3C64XX_EINT9CON	S3C64XX_GPIOREG(0x210)
+
+#define S3C64XX_EINT12FLTCON	S3C64XX_GPIOREG(0x220)
+#define S3C64XX_EINT34FLTCON	S3C64XX_GPIOREG(0x224)
+#define S3C64XX_EINT56FLTCON	S3C64XX_GPIOREG(0x228)
+#define S3C64XX_EINT78FLTCON	S3C64XX_GPIOREG(0x22C)
+#define S3C64XX_EINT9FLTCON	S3C64XX_GPIOREG(0x230)
+
+#define S3C64XX_EINT12MASK	S3C64XX_GPIOREG(0x240)
+#define S3C64XX_EINT34MASK	S3C64XX_GPIOREG(0x244)
+#define S3C64XX_EINT56MASK	S3C64XX_GPIOREG(0x248)
+#define S3C64XX_EINT78MASK	S3C64XX_GPIOREG(0x24C)
+#define S3C64XX_EINT9MASK	S3C64XX_GPIOREG(0x250)
+
+#define S3C64XX_EINT12PEND	S3C64XX_GPIOREG(0x260)
+#define S3C64XX_EINT34PEND	S3C64XX_GPIOREG(0x264)
+#define S3C64XX_EINT56PEND	S3C64XX_GPIOREG(0x268)
+#define S3C64XX_EINT78PEND	S3C64XX_GPIOREG(0x26C)
+#define S3C64XX_EINT9PEND	S3C64XX_GPIOREG(0x270)
+
+#define S3C64XX_PRIORITY	S3C64XX_GPIOREG(0x280)
+#define S3C64XX_PRIORITY_ARB(x)	(1 << (x))
+
+#define S3C64XX_SERVICE		S3C64XX_GPIOREG(0x284)
+#define S3C64XX_SERVICEPEND	S3C64XX_GPIOREG(0x288)
+
+#define S3C64XX_EINT0CON0	S3C64XX_GPIOREG(0x900)
+#define S3C64XX_EINT0CON1	S3C64XX_GPIOREG(0x904)
+#define S3C64XX_EINT0FLTCON0	S3C64XX_GPIOREG(0x910)
+#define S3C64XX_EINT0FLTCON1	S3C64XX_GPIOREG(0x914)
+#define S3C64XX_EINT0FLTCON2	S3C64XX_GPIOREG(0x918)
+#define S3C64XX_EINT0FLTCON3	S3C64XX_GPIOREG(0x91C)
+
+#define S3C64XX_EINT0MASK	S3C64XX_GPIOREG(0x920)
+#define S3C64XX_EINT0PEND	S3C64XX_GPIOREG(0x924)
+
+/* GPIO sleep configuration */
+
+#define S3C64XX_SPCONSLP	S3C64XX_GPIOREG(0x880)
+
+#define S3C64XX_SPCONSLP_TDO_PULLDOWN	(1 << 14)
+#define S3C64XX_SPCONSLP_CKE1INIT	(1 << 5)
+
+#define S3C64XX_SPCONSLP_RSTOUT_MASK	(0x3 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_OUT0	(0x0 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_OUT1	(0x1 << 12)
+#define S3C64XX_SPCONSLP_RSTOUT_HIZ	(0x2 << 12)
+
+#define S3C64XX_SPCONSLP_KPCOL_MASK	(0x3 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_OUT0	(0x0 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_OUT1	(0x1 << 0)
+#define S3C64XX_SPCONSLP_KPCOL_INP	(0x2 << 0)
+
+
+#define S3C64XX_SLPEN		S3C64XX_GPIOREG(0x930)
+
+#define S3C64XX_SLPEN_USE_xSLP		(1 << 0)
+#define S3C64XX_SLPEN_CFG_BYSLPEN	(1 << 1)
+
+#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */
+
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
new file mode 100644
index 000000000..6a1127891
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/regs-irq.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+
+#endif /* __ASM_ARCH_6400_REGS_IRQ_H */