summaryrefslogtreecommitdiff
path: root/arch/arm/mach-sa1100/include/mach
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /arch/arm/mach-sa1100/include/mach
Initial import
Diffstat (limited to 'arch/arm/mach-sa1100/include/mach')
-rw-r--r--arch/arm/mach-sa1100/include/mach/SA-1100.h1831
-rw-r--r--arch/arm/mach-sa1100/include/mach/SA-1101.h925
-rw-r--r--arch/arm/mach-sa1100/include/mach/assabet.h104
-rw-r--r--arch/arm/mach-sa1100/include/mach/badge4.h75
-rw-r--r--arch/arm/mach-sa1100/include/mach/bitfield.h113
-rw-r--r--arch/arm/mach-sa1100/include/mach/cerf.h23
-rw-r--r--arch/arm/mach-sa1100/include/mach/collie.h95
-rw-r--r--arch/arm/mach-sa1100/include/mach/generic.h1
-rw-r--r--arch/arm/mach-sa1100/include/mach/h3xxx.h85
-rw-r--r--arch/arm/mach-sa1100/include/mach/hardware.h81
-rw-r--r--arch/arm/mach-sa1100/include/mach/irqs.h100
-rw-r--r--arch/arm/mach-sa1100/include/mach/jornada720.h32
-rw-r--r--arch/arm/mach-sa1100/include/mach/memory.h36
-rw-r--r--arch/arm/mach-sa1100/include/mach/mtd-xip.h26
-rw-r--r--arch/arm/mach-sa1100/include/mach/nanoengine.h52
-rw-r--r--arch/arm/mach-sa1100/include/mach/neponset.h30
-rw-r--r--arch/arm/mach-sa1100/include/mach/reset.h18
-rw-r--r--arch/arm/mach-sa1100/include/mach/shannon.h39
-rw-r--r--arch/arm/mach-sa1100/include/mach/simpad.h158
-rw-r--r--arch/arm/mach-sa1100/include/mach/uncompress.h51
20 files changed, 3875 insertions, 0 deletions
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
new file mode 100644
index 000000000..0ac6cc08a
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -0,0 +1,1831 @@
+/*
+ * FILE SA-1100.h
+ *
+ * Version 1.2
+ * Author Copyright (c) Marc A. Viredaz, 1998
+ * DEC Western Research Laboratory, Palo Alto, CA
+ * Date January 1998 (April 1997)
+ * System StrongARM SA-1100
+ * Language C or ARM Assembly
+ * Purpose Definition of constants related to the StrongARM
+ * SA-1100 microprocessor (Advanced RISC Machine (ARM)
+ * architecture version 4). This file is based on the
+ * StrongARM SA-1100 data sheet version 2.2.
+ *
+ */
+
+
+/* Be sure that virtual mapping is defined right */
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not SA-1100.h
+#endif
+
+#include "bitfield.h"
+
+/*
+ * SA1100 CS line to physical address
+ */
+
+#define SA1100_CS0_PHYS 0x00000000
+#define SA1100_CS1_PHYS 0x08000000
+#define SA1100_CS2_PHYS 0x10000000
+#define SA1100_CS3_PHYS 0x18000000
+#define SA1100_CS4_PHYS 0x40000000
+#define SA1100_CS5_PHYS 0x48000000
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
+#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
+#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
+#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
+#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
+
+#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
+#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
+#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
+
+#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
+#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
+#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
+
+#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
+ (0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
+#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
+ (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
+ (_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
+#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
+#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
+#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
+
+#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
+#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
+#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
+#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
+
+
+/*
+ * Universal Serial Bus (USB) Device Controller (UDC) control registers
+ *
+ * Registers
+ * Ser0UDCCR Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Control Register (read/write).
+ * Ser0UDCAR Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Address Register (read/write).
+ * Ser0UDCOMP Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Output Maximum Packet size register
+ * (read/write).
+ * Ser0UDCIMP Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Input Maximum Packet size register
+ * (read/write).
+ * Ser0UDCCS0 Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Control/Status register end-point 0
+ * (read/write).
+ * Ser0UDCCS1 Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Control/Status register end-point 1
+ * (output, read/write).
+ * Ser0UDCCS2 Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Control/Status register end-point 2
+ * (input, read/write).
+ * Ser0UDCD0 Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Data register end-point 0
+ * (read/write).
+ * Ser0UDCWC Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Write Count register end-point 0
+ * (read).
+ * Ser0UDCDR Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Data Register (read/write).
+ * Ser0UDCSR Serial port 0 Universal Serial Bus (USB) Device
+ * Controller (UDC) Status Register (read/write).
+ */
+
+#define Ser0UDCCR __REG(0x80000000) /* Ser. port 0 UDC Control Reg. */
+#define Ser0UDCAR __REG(0x80000004) /* Ser. port 0 UDC Address Reg. */
+#define Ser0UDCOMP __REG(0x80000008) /* Ser. port 0 UDC Output Maximum Packet size reg. */
+#define Ser0UDCIMP __REG(0x8000000C) /* Ser. port 0 UDC Input Maximum Packet size reg. */
+#define Ser0UDCCS0 __REG(0x80000010) /* Ser. port 0 UDC Control/Status reg. end-point 0 */
+#define Ser0UDCCS1 __REG(0x80000014) /* Ser. port 0 UDC Control/Status reg. end-point 1 (output) */
+#define Ser0UDCCS2 __REG(0x80000018) /* Ser. port 0 UDC Control/Status reg. end-point 2 (input) */
+#define Ser0UDCD0 __REG(0x8000001C) /* Ser. port 0 UDC Data reg. end-point 0 */
+#define Ser0UDCWC __REG(0x80000020) /* Ser. port 0 UDC Write Count reg. end-point 0 */
+#define Ser0UDCDR __REG(0x80000028) /* Ser. port 0 UDC Data Reg. */
+#define Ser0UDCSR __REG(0x80000030) /* Ser. port 0 UDC Status Reg. */
+
+#define UDCCR_UDD 0x00000001 /* UDC Disable */
+#define UDCCR_UDA 0x00000002 /* UDC Active (read) */
+#define UDCCR_RESIM 0x00000004 /* Resume Interrupt Mask, per errata */
+#define UDCCR_EIM 0x00000008 /* End-point 0 Interrupt Mask */
+ /* (disable) */
+#define UDCCR_RIM 0x00000010 /* Receive Interrupt Mask */
+ /* (disable) */
+#define UDCCR_TIM 0x00000020 /* Transmit Interrupt Mask */
+ /* (disable) */
+#define UDCCR_SRM 0x00000040 /* Suspend/Resume interrupt Mask */
+ /* (disable) */
+#define UDCCR_SUSIM UDCCR_SRM /* Per errata, SRM just masks suspend */
+#define UDCCR_REM 0x00000080 /* REset interrupt Mask (disable) */
+
+#define UDCAR_ADD Fld (7, 0) /* function ADDress */
+
+#define UDCOMP_OUTMAXP Fld (8, 0) /* OUTput MAXimum Packet size - 1 */
+ /* [byte] */
+#define UDCOMP_OutMaxPkt(Size) /* Output Maximum Packet size */ \
+ /* [1..256 byte] */ \
+ (((Size) - 1) << FShft (UDCOMP_OUTMAXP))
+
+#define UDCIMP_INMAXP Fld (8, 0) /* INput MAXimum Packet size - 1 */
+ /* [byte] */
+#define UDCIMP_InMaxPkt(Size) /* Input Maximum Packet size */ \
+ /* [1..256 byte] */ \
+ (((Size) - 1) << FShft (UDCIMP_INMAXP))
+
+#define UDCCS0_OPR 0x00000001 /* Output Packet Ready (read) */
+#define UDCCS0_IPR 0x00000002 /* Input Packet Ready */
+#define UDCCS0_SST 0x00000004 /* Sent STall */
+#define UDCCS0_FST 0x00000008 /* Force STall */
+#define UDCCS0_DE 0x00000010 /* Data End */
+#define UDCCS0_SE 0x00000020 /* Setup End (read) */
+#define UDCCS0_SO 0x00000040 /* Serviced Output packet ready */
+ /* (write) */
+#define UDCCS0_SSE 0x00000080 /* Serviced Setup End (write) */
+
+#define UDCCS1_RFS 0x00000001 /* Receive FIFO 12-bytes or more */
+ /* Service request (read) */
+#define UDCCS1_RPC 0x00000002 /* Receive Packet Complete */
+#define UDCCS1_RPE 0x00000004 /* Receive Packet Error (read) */
+#define UDCCS1_SST 0x00000008 /* Sent STall */
+#define UDCCS1_FST 0x00000010 /* Force STall */
+#define UDCCS1_RNE 0x00000020 /* Receive FIFO Not Empty (read) */
+
+#define UDCCS2_TFS 0x00000001 /* Transmit FIFO 8-bytes or less */
+ /* Service request (read) */
+#define UDCCS2_TPC 0x00000002 /* Transmit Packet Complete */
+#define UDCCS2_TPE 0x00000004 /* Transmit Packet Error (read) */
+#define UDCCS2_TUR 0x00000008 /* Transmit FIFO Under-Run */
+#define UDCCS2_SST 0x00000010 /* Sent STall */
+#define UDCCS2_FST 0x00000020 /* Force STall */
+
+#define UDCD0_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
+
+#define UDCWC_WC Fld (4, 0) /* Write Count */
+
+#define UDCDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
+
+#define UDCSR_EIR 0x00000001 /* End-point 0 Interrupt Request */
+#define UDCSR_RIR 0x00000002 /* Receive Interrupt Request */
+#define UDCSR_TIR 0x00000004 /* Transmit Interrupt Request */
+#define UDCSR_SUSIR 0x00000008 /* SUSpend Interrupt Request */
+#define UDCSR_RESIR 0x00000010 /* RESume Interrupt Request */
+#define UDCSR_RSTIR 0x00000020 /* ReSeT Interrupt Request */
+
+
+/*
+ * Universal Asynchronous Receiver/Transmitter (UART) control registers
+ *
+ * Registers
+ * Ser1UTCR0 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 0
+ * (read/write).
+ * Ser1UTCR1 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 1
+ * (read/write).
+ * Ser1UTCR2 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 2
+ * (read/write).
+ * Ser1UTCR3 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 3
+ * (read/write).
+ * Ser1UTDR Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Data Register
+ * (read/write).
+ * Ser1UTSR0 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 0
+ * (read/write).
+ * Ser1UTSR1 Serial port 1 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 1 (read).
+ *
+ * Ser2UTCR0 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 0
+ * (read/write).
+ * Ser2UTCR1 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 1
+ * (read/write).
+ * Ser2UTCR2 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 2
+ * (read/write).
+ * Ser2UTCR3 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 3
+ * (read/write).
+ * Ser2UTCR4 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 4
+ * (read/write).
+ * Ser2UTDR Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Data Register
+ * (read/write).
+ * Ser2UTSR0 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 0
+ * (read/write).
+ * Ser2UTSR1 Serial port 2 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 1 (read).
+ *
+ * Ser3UTCR0 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 0
+ * (read/write).
+ * Ser3UTCR1 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 1
+ * (read/write).
+ * Ser3UTCR2 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 2
+ * (read/write).
+ * Ser3UTCR3 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Control Register 3
+ * (read/write).
+ * Ser3UTDR Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Data Register
+ * (read/write).
+ * Ser3UTSR0 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 0
+ * (read/write).
+ * Ser3UTSR1 Serial port 3 Universal Asynchronous
+ * Receiver/Transmitter (UART) Status Register 1 (read).
+ *
+ * Clocks
+ * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
+ * or 3.5795 MHz).
+ * fua, Tua Frequency, period of the UART communication.
+ */
+
+#define _UTCR0(Nb) __REG(0x80010000 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 0 [1..3] */
+#define _UTCR1(Nb) __REG(0x80010004 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 1 [1..3] */
+#define _UTCR2(Nb) __REG(0x80010008 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 2 [1..3] */
+#define _UTCR3(Nb) __REG(0x8001000C + ((Nb) - 1)*0x00020000) /* UART Control Reg. 3 [1..3] */
+#define _UTCR4(Nb) __REG(0x80010010 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 4 [2] */
+#define _UTDR(Nb) __REG(0x80010014 + ((Nb) - 1)*0x00020000) /* UART Data Reg. [1..3] */
+#define _UTSR0(Nb) __REG(0x8001001C + ((Nb) - 1)*0x00020000) /* UART Status Reg. 0 [1..3] */
+#define _UTSR1(Nb) __REG(0x80010020 + ((Nb) - 1)*0x00020000) /* UART Status Reg. 1 [1..3] */
+
+#define Ser1UTCR0 _UTCR0 (1) /* Ser. port 1 UART Control Reg. 0 */
+#define Ser1UTCR1 _UTCR1 (1) /* Ser. port 1 UART Control Reg. 1 */
+#define Ser1UTCR2 _UTCR2 (1) /* Ser. port 1 UART Control Reg. 2 */
+#define Ser1UTCR3 _UTCR3 (1) /* Ser. port 1 UART Control Reg. 3 */
+#define Ser1UTDR _UTDR (1) /* Ser. port 1 UART Data Reg. */
+#define Ser1UTSR0 _UTSR0 (1) /* Ser. port 1 UART Status Reg. 0 */
+#define Ser1UTSR1 _UTSR1 (1) /* Ser. port 1 UART Status Reg. 1 */
+
+#define Ser2UTCR0 _UTCR0 (2) /* Ser. port 2 UART Control Reg. 0 */
+#define Ser2UTCR1 _UTCR1 (2) /* Ser. port 2 UART Control Reg. 1 */
+#define Ser2UTCR2 _UTCR2 (2) /* Ser. port 2 UART Control Reg. 2 */
+#define Ser2UTCR3 _UTCR3 (2) /* Ser. port 2 UART Control Reg. 3 */
+#define Ser2UTCR4 _UTCR4 (2) /* Ser. port 2 UART Control Reg. 4 */
+#define Ser2UTDR _UTDR (2) /* Ser. port 2 UART Data Reg. */
+#define Ser2UTSR0 _UTSR0 (2) /* Ser. port 2 UART Status Reg. 0 */
+#define Ser2UTSR1 _UTSR1 (2) /* Ser. port 2 UART Status Reg. 1 */
+
+#define Ser3UTCR0 _UTCR0 (3) /* Ser. port 3 UART Control Reg. 0 */
+#define Ser3UTCR1 _UTCR1 (3) /* Ser. port 3 UART Control Reg. 1 */
+#define Ser3UTCR2 _UTCR2 (3) /* Ser. port 3 UART Control Reg. 2 */
+#define Ser3UTCR3 _UTCR3 (3) /* Ser. port 3 UART Control Reg. 3 */
+#define Ser3UTDR _UTDR (3) /* Ser. port 3 UART Data Reg. */
+#define Ser3UTSR0 _UTSR0 (3) /* Ser. port 3 UART Status Reg. 0 */
+#define Ser3UTSR1 _UTSR1 (3) /* Ser. port 3 UART Status Reg. 1 */
+
+/* Those are still used in some places */
+#define _Ser1UTCR0 __PREG(Ser1UTCR0)
+#define _Ser2UTCR0 __PREG(Ser2UTCR0)
+#define _Ser3UTCR0 __PREG(Ser3UTCR0)
+
+/* Register offsets */
+#define UTCR0 0x00
+#define UTCR1 0x04
+#define UTCR2 0x08
+#define UTCR3 0x0c
+#define UTDR 0x14
+#define UTSR0 0x1c
+#define UTSR1 0x20
+
+#define UTCR0_PE 0x00000001 /* Parity Enable */
+#define UTCR0_OES 0x00000002 /* Odd/Even parity Select */
+#define UTCR0_OddPar (UTCR0_OES*0) /* Odd Parity */
+#define UTCR0_EvenPar (UTCR0_OES*1) /* Even Parity */
+#define UTCR0_SBS 0x00000004 /* Stop Bit Select */
+#define UTCR0_1StpBit (UTCR0_SBS*0) /* 1 Stop Bit per frame */
+#define UTCR0_2StpBit (UTCR0_SBS*1) /* 2 Stop Bits per frame */
+#define UTCR0_DSS 0x00000008 /* Data Size Select */
+#define UTCR0_7BitData (UTCR0_DSS*0) /* 7-Bit Data */
+#define UTCR0_8BitData (UTCR0_DSS*1) /* 8-Bit Data */
+#define UTCR0_SCE 0x00000010 /* Sample Clock Enable */
+ /* (ser. port 1: GPIO [18], */
+ /* ser. port 3: GPIO [20]) */
+#define UTCR0_RCE 0x00000020 /* Receive Clock Edge select */
+#define UTCR0_RcRsEdg (UTCR0_RCE*0) /* Receive clock Rising-Edge */
+#define UTCR0_RcFlEdg (UTCR0_RCE*1) /* Receive clock Falling-Edge */
+#define UTCR0_TCE 0x00000040 /* Transmit Clock Edge select */
+#define UTCR0_TrRsEdg (UTCR0_TCE*0) /* Transmit clock Rising-Edge */
+#define UTCR0_TrFlEdg (UTCR0_TCE*1) /* Transmit clock Falling-Edge */
+#define UTCR0_Ser2IrDA /* Ser. port 2 IrDA settings */ \
+ (UTCR0_1StpBit + UTCR0_8BitData)
+
+#define UTCR1_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */
+#define UTCR2_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */
+ /* fua = fxtl/(16*(BRD[11:0] + 1)) */
+ /* Tua = 16*(BRD [11:0] + 1)*Txtl */
+#define UTCR1_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
+ (((Div) - 16)/16 >> FSize (UTCR2_BRD) << \
+ FShft (UTCR1_BRD))
+#define UTCR2_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
+ (((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \
+ FShft (UTCR2_BRD))
+ /* fua = fxtl/(16*Floor (Div/16)) */
+ /* Tua = 16*Floor (Div/16)*Txtl */
+#define UTCR1_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
+ (((Div) - 1)/16 >> FSize (UTCR2_BRD) << \
+ FShft (UTCR1_BRD))
+#define UTCR2_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
+ (((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \
+ FShft (UTCR2_BRD))
+ /* fua = fxtl/(16*Ceil (Div/16)) */
+ /* Tua = 16*Ceil (Div/16)*Txtl */
+
+#define UTCR3_RXE 0x00000001 /* Receive Enable */
+#define UTCR3_TXE 0x00000002 /* Transmit Enable */
+#define UTCR3_BRK 0x00000004 /* BReaK mode */
+#define UTCR3_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */
+ /* more Interrupt Enable */
+#define UTCR3_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */
+ /* Interrupt Enable */
+#define UTCR3_LBM 0x00000020 /* Look-Back Mode */
+#define UTCR3_Ser2IrDA /* Ser. port 2 IrDA settings (RIE, */ \
+ /* TIE, LBM can be set or cleared) */ \
+ (UTCR3_RXE + UTCR3_TXE)
+
+#define UTCR4_HSE 0x00000001 /* Hewlett-Packard Serial InfraRed */
+ /* (HP-SIR) modulation Enable */
+#define UTCR4_NRZ (UTCR4_HSE*0) /* Non-Return to Zero modulation */
+#define UTCR4_HPSIR (UTCR4_HSE*1) /* HP-SIR modulation */
+#define UTCR4_LPM 0x00000002 /* Low-Power Mode */
+#define UTCR4_Z3_16Bit (UTCR4_LPM*0) /* Zero pulse = 3/16 Bit time */
+#define UTCR4_Z1_6us (UTCR4_LPM*1) /* Zero pulse = 1.6 us */
+
+#define UTDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
+#if 0 /* Hidden receive FIFO bits */
+#define UTDR_PRE 0x00000100 /* receive PaRity Error (read) */
+#define UTDR_FRE 0x00000200 /* receive FRaming Error (read) */
+#define UTDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */
+#endif /* 0 */
+
+#define UTSR0_TFS 0x00000001 /* Transmit FIFO 1/2-full or less */
+ /* Service request (read) */
+#define UTSR0_RFS 0x00000002 /* Receive FIFO 1/3-to-2/3-full or */
+ /* more Service request (read) */
+#define UTSR0_RID 0x00000004 /* Receiver IDle */
+#define UTSR0_RBB 0x00000008 /* Receive Beginning of Break */
+#define UTSR0_REB 0x00000010 /* Receive End of Break */
+#define UTSR0_EIF 0x00000020 /* Error In FIFO (read) */
+
+#define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */
+#define UTSR1_RNE 0x00000002 /* Receive FIFO Not Empty (read) */
+#define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */
+#define UTSR1_PRE 0x00000008 /* receive PaRity Error (read) */
+#define UTSR1_FRE 0x00000010 /* receive FRaming Error (read) */
+#define UTSR1_ROR 0x00000020 /* Receive FIFO Over-Run (read) */
+
+
+/*
+ * Synchronous Data Link Controller (SDLC) control registers
+ *
+ * Registers
+ * Ser1SDCR0 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Control Register 0 (read/write).
+ * Ser1SDCR1 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Control Register 1 (read/write).
+ * Ser1SDCR2 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Control Register 2 (read/write).
+ * Ser1SDCR3 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Control Register 3 (read/write).
+ * Ser1SDCR4 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Control Register 4 (read/write).
+ * Ser1SDDR Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Data Register (read/write).
+ * Ser1SDSR0 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Status Register 0 (read/write).
+ * Ser1SDSR1 Serial port 1 Synchronous Data Link Controller (SDLC)
+ * Status Register 1 (read/write).
+ *
+ * Clocks
+ * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
+ * or 3.5795 MHz).
+ * fsd, Tsd Frequency, period of the SDLC communication.
+ */
+
+#define Ser1SDCR0 __REG(0x80020060) /* Ser. port 1 SDLC Control Reg. 0 */
+#define Ser1SDCR1 __REG(0x80020064) /* Ser. port 1 SDLC Control Reg. 1 */
+#define Ser1SDCR2 __REG(0x80020068) /* Ser. port 1 SDLC Control Reg. 2 */
+#define Ser1SDCR3 __REG(0x8002006C) /* Ser. port 1 SDLC Control Reg. 3 */
+#define Ser1SDCR4 __REG(0x80020070) /* Ser. port 1 SDLC Control Reg. 4 */
+#define Ser1SDDR __REG(0x80020078) /* Ser. port 1 SDLC Data Reg. */
+#define Ser1SDSR0 __REG(0x80020080) /* Ser. port 1 SDLC Status Reg. 0 */
+#define Ser1SDSR1 __REG(0x80020084) /* Ser. port 1 SDLC Status Reg. 1 */
+
+#define SDCR0_SUS 0x00000001 /* SDLC/UART Select */
+#define SDCR0_SDLC (SDCR0_SUS*0) /* SDLC mode (TXD1 & RXD1) */
+#define SDCR0_UART (SDCR0_SUS*1) /* UART mode (TXD1 & RXD1) */
+#define SDCR0_SDF 0x00000002 /* Single/Double start Flag select */
+#define SDCR0_SglFlg (SDCR0_SDF*0) /* Single start Flag */
+#define SDCR0_DblFlg (SDCR0_SDF*1) /* Double start Flag */
+#define SDCR0_LBM 0x00000004 /* Look-Back Mode */
+#define SDCR0_BMS 0x00000008 /* Bit Modulation Select */
+#define SDCR0_FM0 (SDCR0_BMS*0) /* Freq. Modulation zero (0) */
+#define SDCR0_NRZ (SDCR0_BMS*1) /* Non-Return to Zero modulation */
+#define SDCR0_SCE 0x00000010 /* Sample Clock Enable (GPIO [16]) */
+#define SDCR0_SCD 0x00000020 /* Sample Clock Direction select */
+ /* (GPIO [16]) */
+#define SDCR0_SClkIn (SDCR0_SCD*0) /* Sample Clock Input */
+#define SDCR0_SClkOut (SDCR0_SCD*1) /* Sample Clock Output */
+#define SDCR0_RCE 0x00000040 /* Receive Clock Edge select */
+#define SDCR0_RcRsEdg (SDCR0_RCE*0) /* Receive clock Rising-Edge */
+#define SDCR0_RcFlEdg (SDCR0_RCE*1) /* Receive clock Falling-Edge */
+#define SDCR0_TCE 0x00000080 /* Transmit Clock Edge select */
+#define SDCR0_TrRsEdg (SDCR0_TCE*0) /* Transmit clock Rising-Edge */
+#define SDCR0_TrFlEdg (SDCR0_TCE*1) /* Transmit clock Falling-Edge */
+
+#define SDCR1_AAF 0x00000001 /* Abort After Frame enable */
+ /* (GPIO [17]) */
+#define SDCR1_TXE 0x00000002 /* Transmit Enable */
+#define SDCR1_RXE 0x00000004 /* Receive Enable */
+#define SDCR1_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */
+ /* more Interrupt Enable */
+#define SDCR1_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */
+ /* Interrupt Enable */
+#define SDCR1_AME 0x00000020 /* Address Match Enable */
+#define SDCR1_TUS 0x00000040 /* Transmit FIFO Under-run Select */
+#define SDCR1_EFrmURn (SDCR1_TUS*0) /* End Frame on Under-Run */
+#define SDCR1_AbortURn (SDCR1_TUS*1) /* Abort on Under-Run */
+#define SDCR1_RAE 0x00000080 /* Receive Abort interrupt Enable */
+
+#define SDCR2_AMV Fld (8, 0) /* Address Match Value */
+
+#define SDCR3_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */
+#define SDCR4_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */
+ /* fsd = fxtl/(16*(BRD[11:0] + 1)) */
+ /* Tsd = 16*(BRD[11:0] + 1)*Txtl */
+#define SDCR3_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
+ (((Div) - 16)/16 >> FSize (SDCR4_BRD) << \
+ FShft (SDCR3_BRD))
+#define SDCR4_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \
+ (((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \
+ FShft (SDCR4_BRD))
+ /* fsd = fxtl/(16*Floor (Div/16)) */
+ /* Tsd = 16*Floor (Div/16)*Txtl */
+#define SDCR3_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
+ (((Div) - 1)/16 >> FSize (SDCR4_BRD) << \
+ FShft (SDCR3_BRD))
+#define SDCR4_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \
+ (((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \
+ FShft (SDCR4_BRD))
+ /* fsd = fxtl/(16*Ceil (Div/16)) */
+ /* Tsd = 16*Ceil (Div/16)*Txtl */
+
+#define SDDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
+#if 0 /* Hidden receive FIFO bits */
+#define SDDR_EOF 0x00000100 /* receive End-Of-Frame (read) */
+#define SDDR_CRE 0x00000200 /* receive CRC Error (read) */
+#define SDDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */
+#endif /* 0 */
+
+#define SDSR0_EIF 0x00000001 /* Error In FIFO (read) */
+#define SDSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */
+#define SDSR0_RAB 0x00000004 /* Receive ABort */
+#define SDSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */
+ /* Service request (read) */
+#define SDSR0_RFS 0x00000010 /* Receive FIFO 1/3-to-2/3-full or */
+ /* more Service request (read) */
+
+#define SDSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */
+#define SDSR1_TBY 0x00000002 /* Transmitter BusY (read) */
+#define SDSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */
+#define SDSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */
+#define SDSR1_RTD 0x00000010 /* Receive Transition Detected */
+#define SDSR1_EOF 0x00000020 /* receive End-Of-Frame (read) */
+#define SDSR1_CRE 0x00000040 /* receive CRC Error (read) */
+#define SDSR1_ROR 0x00000080 /* Receive FIFO Over-Run (read) */
+
+
+/*
+ * High-Speed Serial to Parallel controller (HSSP) control registers
+ *
+ * Registers
+ * Ser2HSCR0 Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Control Register 0 (read/write).
+ * Ser2HSCR1 Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Control Register 1 (read/write).
+ * Ser2HSDR Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Data Register (read/write).
+ * Ser2HSSR0 Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Status Register 0 (read/write).
+ * Ser2HSSR1 Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Status Register 1 (read).
+ * Ser2HSCR2 Serial port 2 High-Speed Serial to Parallel
+ * controller (HSSP) Control Register 2 (read/write).
+ * [The HSCR2 register is only implemented in
+ * versions 2.0 (rev. = 8) and higher of the StrongARM
+ * SA-1100.]
+ */
+
+#define Ser2HSCR0 __REG(0x80040060) /* Ser. port 2 HSSP Control Reg. 0 */
+#define Ser2HSCR1 __REG(0x80040064) /* Ser. port 2 HSSP Control Reg. 1 */
+#define Ser2HSDR __REG(0x8004006C) /* Ser. port 2 HSSP Data Reg. */
+#define Ser2HSSR0 __REG(0x80040074) /* Ser. port 2 HSSP Status Reg. 0 */
+#define Ser2HSSR1 __REG(0x80040078) /* Ser. port 2 HSSP Status Reg. 1 */
+#define Ser2HSCR2 __REG(0x90060028) /* Ser. port 2 HSSP Control Reg. 2 */
+
+#define HSCR0_ITR 0x00000001 /* IrDA Transmission Rate */
+#define HSCR0_UART (HSCR0_ITR*0) /* UART mode (115.2 kb/s if IrDA) */
+#define HSCR0_HSSP (HSCR0_ITR*1) /* HSSP mode (4 Mb/s) */
+#define HSCR0_LBM 0x00000002 /* Look-Back Mode */
+#define HSCR0_TUS 0x00000004 /* Transmit FIFO Under-run Select */
+#define HSCR0_EFrmURn (HSCR0_TUS*0) /* End Frame on Under-Run */
+#define HSCR0_AbortURn (HSCR0_TUS*1) /* Abort on Under-Run */
+#define HSCR0_TXE 0x00000008 /* Transmit Enable */
+#define HSCR0_RXE 0x00000010 /* Receive Enable */
+#define HSCR0_RIE 0x00000020 /* Receive FIFO 2/5-to-3/5-full or */
+ /* more Interrupt Enable */
+#define HSCR0_TIE 0x00000040 /* Transmit FIFO 1/2-full or less */
+ /* Interrupt Enable */
+#define HSCR0_AME 0x00000080 /* Address Match Enable */
+
+#define HSCR1_AMV Fld (8, 0) /* Address Match Value */
+
+#define HSDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */
+#if 0 /* Hidden receive FIFO bits */
+#define HSDR_EOF 0x00000100 /* receive End-Of-Frame (read) */
+#define HSDR_CRE 0x00000200 /* receive CRC Error (read) */
+#define HSDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */
+#endif /* 0 */
+
+#define HSSR0_EIF 0x00000001 /* Error In FIFO (read) */
+#define HSSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */
+#define HSSR0_RAB 0x00000004 /* Receive ABort */
+#define HSSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */
+ /* Service request (read) */
+#define HSSR0_RFS 0x00000010 /* Receive FIFO 2/5-to-3/5-full or */
+ /* more Service request (read) */
+#define HSSR0_FRE 0x00000020 /* receive FRaming Error */
+
+#define HSSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */
+#define HSSR1_TBY 0x00000002 /* Transmitter BusY (read) */
+#define HSSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */
+#define HSSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */
+#define HSSR1_EOF 0x00000010 /* receive End-Of-Frame (read) */
+#define HSSR1_CRE 0x00000020 /* receive CRC Error (read) */
+#define HSSR1_ROR 0x00000040 /* Receive FIFO Over-Run (read) */
+
+#define HSCR2_TXP 0x00040000 /* Transmit data Polarity (TXD_2) */
+#define HSCR2_TrDataL (HSCR2_TXP*0) /* Transmit Data active Low */
+ /* (inverted) */
+#define HSCR2_TrDataH (HSCR2_TXP*1) /* Transmit Data active High */
+ /* (non-inverted) */
+#define HSCR2_RXP 0x00080000 /* Receive data Polarity (RXD_2) */
+#define HSCR2_RcDataL (HSCR2_RXP*0) /* Receive Data active Low */
+ /* (inverted) */
+#define HSCR2_RcDataH (HSCR2_RXP*1) /* Receive Data active High */
+ /* (non-inverted) */
+
+
+/*
+ * Multi-media Communications Port (MCP) control registers
+ *
+ * Registers
+ * Ser4MCCR0 Serial port 4 Multi-media Communications Port (MCP)
+ * Control Register 0 (read/write).
+ * Ser4MCDR0 Serial port 4 Multi-media Communications Port (MCP)
+ * Data Register 0 (audio, read/write).
+ * Ser4MCDR1 Serial port 4 Multi-media Communications Port (MCP)
+ * Data Register 1 (telecom, read/write).
+ * Ser4MCDR2 Serial port 4 Multi-media Communications Port (MCP)
+ * Data Register 2 (CODEC registers, read/write).
+ * Ser4MCSR Serial port 4 Multi-media Communications Port (MCP)
+ * Status Register (read/write).
+ * Ser4MCCR1 Serial port 4 Multi-media Communications Port (MCP)
+ * Control Register 1 (read/write).
+ * [The MCCR1 register is only implemented in
+ * versions 2.0 (rev. = 8) and higher of the StrongARM
+ * SA-1100.]
+ *
+ * Clocks
+ * fmc, Tmc Frequency, period of the MCP communication (10 MHz,
+ * 12 MHz, or GPIO [21]).
+ * faud, Taud Frequency, period of the audio sampling.
+ * ftcm, Ttcm Frequency, period of the telecom sampling.
+ */
+
+#define Ser4MCCR0 __REG(0x80060000) /* Ser. port 4 MCP Control Reg. 0 */
+#define Ser4MCDR0 __REG(0x80060008) /* Ser. port 4 MCP Data Reg. 0 (audio) */
+#define Ser4MCDR1 __REG(0x8006000C) /* Ser. port 4 MCP Data Reg. 1 (telecom) */
+#define Ser4MCDR2 __REG(0x80060010) /* Ser. port 4 MCP Data Reg. 2 (CODEC reg.) */
+#define Ser4MCSR __REG(0x80060018) /* Ser. port 4 MCP Status Reg. */
+#define Ser4MCCR1 __REG(0x90060030) /* Ser. port 4 MCP Control Reg. 1 */
+
+#define MCCR0_ASD Fld (7, 0) /* Audio Sampling rate Divisor/32 */
+ /* [6..127] */
+ /* faud = fmc/(32*ASD) */
+ /* Taud = 32*ASD*Tmc */
+#define MCCR0_AudSmpDiv(Div) /* Audio Sampling rate Divisor */ \
+ /* [192..4064] */ \
+ ((Div)/32 << FShft (MCCR0_ASD))
+ /* faud = fmc/(32*Floor (Div/32)) */
+ /* Taud = 32*Floor (Div/32)*Tmc */
+#define MCCR0_CeilAudSmpDiv(Div) /* Ceil. of AudSmpDiv [192..4064] */ \
+ (((Div) + 31)/32 << FShft (MCCR0_ASD))
+ /* faud = fmc/(32*Ceil (Div/32)) */
+ /* Taud = 32*Ceil (Div/32)*Tmc */
+#define MCCR0_TSD Fld (7, 8) /* Telecom Sampling rate */
+ /* Divisor/32 [16..127] */
+ /* ftcm = fmc/(32*TSD) */
+ /* Ttcm = 32*TSD*Tmc */
+#define MCCR0_TcmSmpDiv(Div) /* Telecom Sampling rate Divisor */ \
+ /* [512..4064] */ \
+ ((Div)/32 << FShft (MCCR0_TSD))
+ /* ftcm = fmc/(32*Floor (Div/32)) */
+ /* Ttcm = 32*Floor (Div/32)*Tmc */
+#define MCCR0_CeilTcmSmpDiv(Div) /* Ceil. of TcmSmpDiv [512..4064] */ \
+ (((Div) + 31)/32 << FShft (MCCR0_TSD))
+ /* ftcm = fmc/(32*Ceil (Div/32)) */
+ /* Ttcm = 32*Ceil (Div/32)*Tmc */
+#define MCCR0_MCE 0x00010000 /* MCP Enable */
+#define MCCR0_ECS 0x00020000 /* External Clock Select */
+#define MCCR0_IntClk (MCCR0_ECS*0) /* Internal Clock (10 or 12 MHz) */
+#define MCCR0_ExtClk (MCCR0_ECS*1) /* External Clock (GPIO [21]) */
+#define MCCR0_ADM 0x00040000 /* A/D (audio/telecom) data */
+ /* sampling/storing Mode */
+#define MCCR0_VldBit (MCCR0_ADM*0) /* Valid Bit storing mode */
+#define MCCR0_SmpCnt (MCCR0_ADM*1) /* Sampling Counter storing mode */
+#define MCCR0_TTE 0x00080000 /* Telecom Transmit FIFO 1/2-full */
+ /* or less interrupt Enable */
+#define MCCR0_TRE 0x00100000 /* Telecom Receive FIFO 1/2-full */
+ /* or more interrupt Enable */
+#define MCCR0_ATE 0x00200000 /* Audio Transmit FIFO 1/2-full */
+ /* or less interrupt Enable */
+#define MCCR0_ARE 0x00400000 /* Audio Receive FIFO 1/2-full or */
+ /* more interrupt Enable */
+#define MCCR0_LBM 0x00800000 /* Look-Back Mode */
+#define MCCR0_ECP Fld (2, 24) /* External Clock Prescaler - 1 */
+#define MCCR0_ExtClkDiv(Div) /* External Clock Divisor [1..4] */ \
+ (((Div) - 1) << FShft (MCCR0_ECP))
+
+#define MCDR0_DATA Fld (12, 4) /* receive/transmit audio DATA */
+ /* FIFOs */
+
+#define MCDR1_DATA Fld (14, 2) /* receive/transmit telecom DATA */
+ /* FIFOs */
+
+ /* receive/transmit CODEC reg. */
+ /* FIFOs: */
+#define MCDR2_DATA Fld (16, 0) /* reg. DATA */
+#define MCDR2_RW 0x00010000 /* reg. Read/Write (transmit) */
+#define MCDR2_Rd (MCDR2_RW*0) /* reg. Read */
+#define MCDR2_Wr (MCDR2_RW*1) /* reg. Write */
+#define MCDR2_ADD Fld (4, 17) /* reg. ADDress */
+
+#define MCSR_ATS 0x00000001 /* Audio Transmit FIFO 1/2-full */
+ /* or less Service request (read) */
+#define MCSR_ARS 0x00000002 /* Audio Receive FIFO 1/2-full or */
+ /* more Service request (read) */
+#define MCSR_TTS 0x00000004 /* Telecom Transmit FIFO 1/2-full */
+ /* or less Service request (read) */
+#define MCSR_TRS 0x00000008 /* Telecom Receive FIFO 1/2-full */
+ /* or more Service request (read) */
+#define MCSR_ATU 0x00000010 /* Audio Transmit FIFO Under-run */
+#define MCSR_ARO 0x00000020 /* Audio Receive FIFO Over-run */
+#define MCSR_TTU 0x00000040 /* Telecom Transmit FIFO Under-run */
+#define MCSR_TRO 0x00000080 /* Telecom Receive FIFO Over-run */
+#define MCSR_ANF 0x00000100 /* Audio transmit FIFO Not Full */
+ /* (read) */
+#define MCSR_ANE 0x00000200 /* Audio receive FIFO Not Empty */
+ /* (read) */
+#define MCSR_TNF 0x00000400 /* Telecom transmit FIFO Not Full */
+ /* (read) */
+#define MCSR_TNE 0x00000800 /* Telecom receive FIFO Not Empty */
+ /* (read) */
+#define MCSR_CWC 0x00001000 /* CODEC register Write Completed */
+ /* (read) */
+#define MCSR_CRC 0x00002000 /* CODEC register Read Completed */
+ /* (read) */
+#define MCSR_ACE 0x00004000 /* Audio CODEC Enabled (read) */
+#define MCSR_TCE 0x00008000 /* Telecom CODEC Enabled (read) */
+
+#define MCCR1_CFS 0x00100000 /* Clock Freq. Select */
+#define MCCR1_F12MHz (MCCR1_CFS*0) /* Freq. (fmc) = ~ 12 MHz */
+ /* (11.981 MHz) */
+#define MCCR1_F10MHz (MCCR1_CFS*1) /* Freq. (fmc) = ~ 10 MHz */
+ /* (9.585 MHz) */
+
+
+/*
+ * Synchronous Serial Port (SSP) control registers
+ *
+ * Registers
+ * Ser4SSCR0 Serial port 4 Synchronous Serial Port (SSP) Control
+ * Register 0 (read/write).
+ * Ser4SSCR1 Serial port 4 Synchronous Serial Port (SSP) Control
+ * Register 1 (read/write).
+ * [Bits SPO and SP are only implemented in versions 2.0
+ * (rev. = 8) and higher of the StrongARM SA-1100.]
+ * Ser4SSDR Serial port 4 Synchronous Serial Port (SSP) Data
+ * Register (read/write).
+ * Ser4SSSR Serial port 4 Synchronous Serial Port (SSP) Status
+ * Register (read/write).
+ *
+ * Clocks
+ * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
+ * or 3.5795 MHz).
+ * fss, Tss Frequency, period of the SSP communication.
+ */
+
+#define Ser4SSCR0 __REG(0x80070060) /* Ser. port 4 SSP Control Reg. 0 */
+#define Ser4SSCR1 __REG(0x80070064) /* Ser. port 4 SSP Control Reg. 1 */
+#define Ser4SSDR __REG(0x8007006C) /* Ser. port 4 SSP Data Reg. */
+#define Ser4SSSR __REG(0x80070074) /* Ser. port 4 SSP Status Reg. */
+
+#define SSCR0_DSS Fld (4, 0) /* Data Size - 1 Select [3..15] */
+#define SSCR0_DataSize(Size) /* Data Size Select [4..16] */ \
+ (((Size) - 1) << FShft (SSCR0_DSS))
+#define SSCR0_FRF Fld (2, 4) /* FRame Format */
+#define SSCR0_Motorola /* Motorola Serial Peripheral */ \
+ /* Interface (SPI) format */ \
+ (0 << FShft (SSCR0_FRF))
+#define SSCR0_TI /* Texas Instruments Synchronous */ \
+ /* Serial format */ \
+ (1 << FShft (SSCR0_FRF))
+#define SSCR0_National /* National Microwire format */ \
+ (2 << FShft (SSCR0_FRF))
+#define SSCR0_SSE 0x00000080 /* SSP Enable */
+#define SSCR0_SCR Fld (8, 8) /* Serial Clock Rate divisor/2 - 1 */
+ /* fss = fxtl/(2*(SCR + 1)) */
+ /* Tss = 2*(SCR + 1)*Txtl */
+#define SSCR0_SerClkDiv(Div) /* Serial Clock Divisor [2..512] */ \
+ (((Div) - 2)/2 << FShft (SSCR0_SCR))
+ /* fss = fxtl/(2*Floor (Div/2)) */
+ /* Tss = 2*Floor (Div/2)*Txtl */
+#define SSCR0_CeilSerClkDiv(Div) /* Ceil. of SerClkDiv [2..512] */ \
+ (((Div) - 1)/2 << FShft (SSCR0_SCR))
+ /* fss = fxtl/(2*Ceil (Div/2)) */
+ /* Tss = 2*Ceil (Div/2)*Txtl */
+
+#define SSCR1_RIE 0x00000001 /* Receive FIFO 1/2-full or more */
+ /* Interrupt Enable */
+#define SSCR1_TIE 0x00000002 /* Transmit FIFO 1/2-full or less */
+ /* Interrupt Enable */
+#define SSCR1_LBM 0x00000004 /* Look-Back Mode */
+#define SSCR1_SPO 0x00000008 /* Sample clock (SCLK) POlarity */
+#define SSCR1_SClkIactL (SSCR1_SPO*0) /* Sample Clock Inactive Low */
+#define SSCR1_SClkIactH (SSCR1_SPO*1) /* Sample Clock Inactive High */
+#define SSCR1_SP 0x00000010 /* Sample clock (SCLK) Phase */
+#define SSCR1_SClk1P (SSCR1_SP*0) /* Sample Clock active 1 Period */
+ /* after frame (SFRM, 1st edge) */
+#define SSCR1_SClk1_2P (SSCR1_SP*1) /* Sample Clock active 1/2 Period */
+ /* after frame (SFRM, 1st edge) */
+#define SSCR1_ECS 0x00000020 /* External Clock Select */
+#define SSCR1_IntClk (SSCR1_ECS*0) /* Internal Clock */
+#define SSCR1_ExtClk (SSCR1_ECS*1) /* External Clock (GPIO [19]) */
+
+#define SSDR_DATA Fld (16, 0) /* receive/transmit DATA FIFOs */
+
+#define SSSR_TNF 0x00000002 /* Transmit FIFO Not Full (read) */
+#define SSSR_RNE 0x00000004 /* Receive FIFO Not Empty (read) */
+#define SSSR_BSY 0x00000008 /* SSP BuSY (read) */
+#define SSSR_TFS 0x00000010 /* Transmit FIFO 1/2-full or less */
+ /* Service request (read) */
+#define SSSR_RFS 0x00000020 /* Receive FIFO 1/2-full or more */
+ /* Service request (read) */
+#define SSSR_ROR 0x00000040 /* Receive FIFO Over-Run */
+
+
+/*
+ * Operating System (OS) timer control registers
+ *
+ * Registers
+ * OSMR0 Operating System (OS) timer Match Register 0
+ * (read/write).
+ * OSMR1 Operating System (OS) timer Match Register 1
+ * (read/write).
+ * OSMR2 Operating System (OS) timer Match Register 2
+ * (read/write).
+ * OSMR3 Operating System (OS) timer Match Register 3
+ * (read/write).
+ * OSCR Operating System (OS) timer Counter Register
+ * (read/write).
+ * OSSR Operating System (OS) timer Status Register
+ * (read/write).
+ * OWER Operating System (OS) timer Watch-dog Enable Register
+ * (read/write).
+ * OIER Operating System (OS) timer Interrupt Enable Register
+ * (read/write).
+ */
+
+#define OSMR0 io_p2v(0x90000000) /* OS timer Match Reg. 0 */
+#define OSMR1 io_p2v(0x90000004) /* OS timer Match Reg. 1 */
+#define OSMR2 io_p2v(0x90000008) /* OS timer Match Reg. 2 */
+#define OSMR3 io_p2v(0x9000000c) /* OS timer Match Reg. 3 */
+#define OSCR io_p2v(0x90000010) /* OS timer Counter Reg. */
+#define OSSR io_p2v(0x90000014) /* OS timer Status Reg. */
+#define OWER io_p2v(0x90000018) /* OS timer Watch-dog Enable Reg. */
+#define OIER io_p2v(0x9000001C) /* OS timer Interrupt Enable Reg. */
+
+#define OSSR_M(Nb) /* Match detected [0..3] */ \
+ (0x00000001 << (Nb))
+#define OSSR_M0 OSSR_M (0) /* Match detected 0 */
+#define OSSR_M1 OSSR_M (1) /* Match detected 1 */
+#define OSSR_M2 OSSR_M (2) /* Match detected 2 */
+#define OSSR_M3 OSSR_M (3) /* Match detected 3 */
+
+#define OWER_WME 0x00000001 /* Watch-dog Match Enable */
+ /* (set only) */
+
+#define OIER_E(Nb) /* match interrupt Enable [0..3] */ \
+ (0x00000001 << (Nb))
+#define OIER_E0 OIER_E (0) /* match interrupt Enable 0 */
+#define OIER_E1 OIER_E (1) /* match interrupt Enable 1 */
+#define OIER_E2 OIER_E (2) /* match interrupt Enable 2 */
+#define OIER_E3 OIER_E (3) /* match interrupt Enable 3 */
+
+
+/*
+ * Real-Time Clock (RTC) control registers
+ *
+ * Registers
+ * RTAR Real-Time Clock (RTC) Alarm Register (read/write).
+ * RCNR Real-Time Clock (RTC) CouNt Register (read/write).
+ * RTTR Real-Time Clock (RTC) Trim Register (read/write).
+ * RTSR Real-Time Clock (RTC) Status Register (read/write).
+ *
+ * Clocks
+ * frtx, Trtx Frequency, period of the real-time clock crystal
+ * (32.768 kHz nominal).
+ * frtc, Trtc Frequency, period of the real-time clock counter
+ * (1 Hz nominal).
+ */
+
+#define RTAR __REG(0x90010000) /* RTC Alarm Reg. */
+#define RCNR __REG(0x90010004) /* RTC CouNt Reg. */
+#define RTTR __REG(0x90010008) /* RTC Trim Reg. */
+#define RTSR __REG(0x90010010) /* RTC Status Reg. */
+
+#define RTTR_C Fld (16, 0) /* clock divider Count - 1 */
+#define RTTR_D Fld (10, 16) /* trim Delete count */
+ /* frtc = (1023*(C + 1) - D)*frtx/ */
+ /* (1023*(C + 1)^2) */
+ /* Trtc = (1023*(C + 1)^2)*Trtx/ */
+ /* (1023*(C + 1) - D) */
+
+#define RTSR_AL 0x00000001 /* ALarm detected */
+#define RTSR_HZ 0x00000002 /* 1 Hz clock detected */
+#define RTSR_ALE 0x00000004 /* ALarm interrupt Enable */
+#define RTSR_HZE 0x00000008 /* 1 Hz clock interrupt Enable */
+
+
+/*
+ * Power Manager (PM) control registers
+ *
+ * Registers
+ * PMCR Power Manager (PM) Control Register (read/write).
+ * PSSR Power Manager (PM) Sleep Status Register (read/write).
+ * PSPR Power Manager (PM) Scratch-Pad Register (read/write).
+ * PWER Power Manager (PM) Wake-up Enable Register
+ * (read/write).
+ * PCFR Power Manager (PM) general ConFiguration Register
+ * (read/write).
+ * PPCR Power Manager (PM) Phase-Locked Loop (PLL)
+ * Configuration Register (read/write).
+ * PGSR Power Manager (PM) General-Purpose Input/Output (GPIO)
+ * Sleep state Register (read/write, see GPIO pins).
+ * POSR Power Manager (PM) Oscillator Status Register (read).
+ *
+ * Clocks
+ * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz
+ * or 3.5795 MHz).
+ * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
+ */
+
+#define PMCR __REG(0x90020000) /* PM Control Reg. */
+#define PSSR __REG(0x90020004) /* PM Sleep Status Reg. */
+#define PSPR __REG(0x90020008) /* PM Scratch-Pad Reg. */
+#define PWER __REG(0x9002000C) /* PM Wake-up Enable Reg. */
+#define PCFR __REG(0x90020010) /* PM general ConFiguration Reg. */
+#define PPCR __REG(0x90020014) /* PM PLL Configuration Reg. */
+#define PGSR __REG(0x90020018) /* PM GPIO Sleep state Reg. */
+#define POSR __REG(0x9002001C) /* PM Oscillator Status Reg. */
+
+#define PMCR_SF 0x00000001 /* Sleep Force (set only) */
+
+#define PSSR_SS 0x00000001 /* Software Sleep */
+#define PSSR_BFS 0x00000002 /* Battery Fault Status */
+ /* (BATT_FAULT) */
+#define PSSR_VFS 0x00000004 /* Vdd Fault Status (VDD_FAULT) */
+#define PSSR_DH 0x00000008 /* DRAM control Hold */
+#define PSSR_PH 0x00000010 /* Peripheral control Hold */
+
+#define PWER_GPIO(Nb) GPIO_GPIO (Nb) /* GPIO [0..27] wake-up enable */
+#define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */
+#define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */
+#define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */
+#define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */
+#define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */
+#define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */
+#define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */
+#define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */
+#define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */
+#define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */
+#define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */
+#define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */
+#define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */
+#define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */
+#define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */
+#define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */
+#define PWER_GPIO16 PWER_GPIO (16) /* GPIO [16] wake-up enable */
+#define PWER_GPIO17 PWER_GPIO (17) /* GPIO [17] wake-up enable */
+#define PWER_GPIO18 PWER_GPIO (18) /* GPIO [18] wake-up enable */
+#define PWER_GPIO19 PWER_GPIO (19) /* GPIO [19] wake-up enable */
+#define PWER_GPIO20 PWER_GPIO (20) /* GPIO [20] wake-up enable */
+#define PWER_GPIO21 PWER_GPIO (21) /* GPIO [21] wake-up enable */
+#define PWER_GPIO22 PWER_GPIO (22) /* GPIO [22] wake-up enable */
+#define PWER_GPIO23 PWER_GPIO (23) /* GPIO [23] wake-up enable */
+#define PWER_GPIO24 PWER_GPIO (24) /* GPIO [24] wake-up enable */
+#define PWER_GPIO25 PWER_GPIO (25) /* GPIO [25] wake-up enable */
+#define PWER_GPIO26 PWER_GPIO (26) /* GPIO [26] wake-up enable */
+#define PWER_GPIO27 PWER_GPIO (27) /* GPIO [27] wake-up enable */
+#define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */
+
+#define PCFR_OPDE 0x00000001 /* Oscillator Power-Down Enable */
+#define PCFR_ClkRun (PCFR_OPDE*0) /* Clock Running in sleep mode */
+#define PCFR_ClkStp (PCFR_OPDE*1) /* Clock Stopped in sleep mode */
+#define PCFR_FP 0x00000002 /* Float PCMCIA pins */
+#define PCFR_PCMCIANeg (PCFR_FP*0) /* PCMCIA pins Negated (1) */
+#define PCFR_PCMCIAFlt (PCFR_FP*1) /* PCMCIA pins Floating */
+#define PCFR_FS 0x00000004 /* Float Static memory pins */
+#define PCFR_StMemNeg (PCFR_FS*0) /* Static Memory pins Negated (1) */
+#define PCFR_StMemFlt (PCFR_FS*1) /* Static Memory pins Floating */
+#define PCFR_FO 0x00000008 /* Force RTC oscillator */
+ /* (32.768 kHz) enable On */
+
+#define PPCR_CCF Fld (5, 0) /* CPU core Clock (CCLK) Freq. */
+#define PPCR_Fx16 /* Freq. x 16 (fcpu = 16*fxtl) */ \
+ (0x00 << FShft (PPCR_CCF))
+#define PPCR_Fx20 /* Freq. x 20 (fcpu = 20*fxtl) */ \
+ (0x01 << FShft (PPCR_CCF))
+#define PPCR_Fx24 /* Freq. x 24 (fcpu = 24*fxtl) */ \
+ (0x02 << FShft (PPCR_CCF))
+#define PPCR_Fx28 /* Freq. x 28 (fcpu = 28*fxtl) */ \
+ (0x03 << FShft (PPCR_CCF))
+#define PPCR_Fx32 /* Freq. x 32 (fcpu = 32*fxtl) */ \
+ (0x04 << FShft (PPCR_CCF))
+#define PPCR_Fx36 /* Freq. x 36 (fcpu = 36*fxtl) */ \
+ (0x05 << FShft (PPCR_CCF))
+#define PPCR_Fx40 /* Freq. x 40 (fcpu = 40*fxtl) */ \
+ (0x06 << FShft (PPCR_CCF))
+#define PPCR_Fx44 /* Freq. x 44 (fcpu = 44*fxtl) */ \
+ (0x07 << FShft (PPCR_CCF))
+#define PPCR_Fx48 /* Freq. x 48 (fcpu = 48*fxtl) */ \
+ (0x08 << FShft (PPCR_CCF))
+#define PPCR_Fx52 /* Freq. x 52 (fcpu = 52*fxtl) */ \
+ (0x09 << FShft (PPCR_CCF))
+#define PPCR_Fx56 /* Freq. x 56 (fcpu = 56*fxtl) */ \
+ (0x0A << FShft (PPCR_CCF))
+#define PPCR_Fx60 /* Freq. x 60 (fcpu = 60*fxtl) */ \
+ (0x0B << FShft (PPCR_CCF))
+#define PPCR_Fx64 /* Freq. x 64 (fcpu = 64*fxtl) */ \
+ (0x0C << FShft (PPCR_CCF))
+#define PPCR_Fx68 /* Freq. x 68 (fcpu = 68*fxtl) */ \
+ (0x0D << FShft (PPCR_CCF))
+#define PPCR_Fx72 /* Freq. x 72 (fcpu = 72*fxtl) */ \
+ (0x0E << FShft (PPCR_CCF))
+#define PPCR_Fx76 /* Freq. x 76 (fcpu = 76*fxtl) */ \
+ (0x0F << FShft (PPCR_CCF))
+ /* 3.6864 MHz crystal (fxtl): */
+#define PPCR_F59_0MHz PPCR_Fx16 /* Freq. (fcpu) = 59.0 MHz */
+#define PPCR_F73_7MHz PPCR_Fx20 /* Freq. (fcpu) = 73.7 MHz */
+#define PPCR_F88_5MHz PPCR_Fx24 /* Freq. (fcpu) = 88.5 MHz */
+#define PPCR_F103_2MHz PPCR_Fx28 /* Freq. (fcpu) = 103.2 MHz */
+#define PPCR_F118_0MHz PPCR_Fx32 /* Freq. (fcpu) = 118.0 MHz */
+#define PPCR_F132_7MHz PPCR_Fx36 /* Freq. (fcpu) = 132.7 MHz */
+#define PPCR_F147_5MHz PPCR_Fx40 /* Freq. (fcpu) = 147.5 MHz */
+#define PPCR_F162_2MHz PPCR_Fx44 /* Freq. (fcpu) = 162.2 MHz */
+#define PPCR_F176_9MHz PPCR_Fx48 /* Freq. (fcpu) = 176.9 MHz */
+#define PPCR_F191_7MHz PPCR_Fx52 /* Freq. (fcpu) = 191.7 MHz */
+#define PPCR_F206_4MHz PPCR_Fx56 /* Freq. (fcpu) = 206.4 MHz */
+#define PPCR_F221_2MHz PPCR_Fx60 /* Freq. (fcpu) = 221.2 MHz */
+#define PPCR_F239_6MHz PPCR_Fx64 /* Freq. (fcpu) = 239.6 MHz */
+#define PPCR_F250_7MHz PPCR_Fx68 /* Freq. (fcpu) = 250.7 MHz */
+#define PPCR_F265_4MHz PPCR_Fx72 /* Freq. (fcpu) = 265.4 MHz */
+#define PPCR_F280_2MHz PPCR_Fx76 /* Freq. (fcpu) = 280.2 MHz */
+ /* 3.5795 MHz crystal (fxtl): */
+#define PPCR_F57_3MHz PPCR_Fx16 /* Freq. (fcpu) = 57.3 MHz */
+#define PPCR_F71_6MHz PPCR_Fx20 /* Freq. (fcpu) = 71.6 MHz */
+#define PPCR_F85_9MHz PPCR_Fx24 /* Freq. (fcpu) = 85.9 MHz */
+#define PPCR_F100_2MHz PPCR_Fx28 /* Freq. (fcpu) = 100.2 MHz */
+#define PPCR_F114_5MHz PPCR_Fx32 /* Freq. (fcpu) = 114.5 MHz */
+#define PPCR_F128_9MHz PPCR_Fx36 /* Freq. (fcpu) = 128.9 MHz */
+#define PPCR_F143_2MHz PPCR_Fx40 /* Freq. (fcpu) = 143.2 MHz */
+#define PPCR_F157_5MHz PPCR_Fx44 /* Freq. (fcpu) = 157.5 MHz */
+#define PPCR_F171_8MHz PPCR_Fx48 /* Freq. (fcpu) = 171.8 MHz */
+#define PPCR_F186_1MHz PPCR_Fx52 /* Freq. (fcpu) = 186.1 MHz */
+#define PPCR_F200_5MHz PPCR_Fx56 /* Freq. (fcpu) = 200.5 MHz */
+#define PPCR_F214_8MHz PPCR_Fx60 /* Freq. (fcpu) = 214.8 MHz */
+#define PPCR_F229_1MHz PPCR_Fx64 /* Freq. (fcpu) = 229.1 MHz */
+#define PPCR_F243_4MHz PPCR_Fx68 /* Freq. (fcpu) = 243.4 MHz */
+#define PPCR_F257_7MHz PPCR_Fx72 /* Freq. (fcpu) = 257.7 MHz */
+#define PPCR_F272_0MHz PPCR_Fx76 /* Freq. (fcpu) = 272.0 MHz */
+
+#define POSR_OOK 0x00000001 /* RTC Oscillator (32.768 kHz) OK */
+
+
+/*
+ * Reset Controller (RC) control registers
+ *
+ * Registers
+ * RSRR Reset Controller (RC) Software Reset Register
+ * (read/write).
+ * RCSR Reset Controller (RC) Status Register (read/write).
+ */
+
+#define RSRR __REG(0x90030000) /* RC Software Reset Reg. */
+#define RCSR __REG(0x90030004) /* RC Status Reg. */
+
+#define RSRR_SWR 0x00000001 /* SoftWare Reset (set only) */
+
+#define RCSR_HWR 0x00000001 /* HardWare Reset */
+#define RCSR_SWR 0x00000002 /* SoftWare Reset */
+#define RCSR_WDR 0x00000004 /* Watch-Dog Reset */
+#define RCSR_SMR 0x00000008 /* Sleep-Mode Reset */
+
+
+/*
+ * Test unit control registers
+ *
+ * Registers
+ * TUCR Test Unit Control Register (read/write).
+ */
+
+#define TUCR __REG(0x90030008) /* Test Unit Control Reg. */
+
+#define TUCR_TIC 0x00000040 /* TIC mode */
+#define TUCR_TTST 0x00000080 /* Trim TeST mode */
+#define TUCR_RCRC 0x00000100 /* Richard's Cyclic Redundancy */
+ /* Check */
+#define TUCR_PMD 0x00000200 /* Power Management Disable */
+#define TUCR_MR 0x00000400 /* Memory Request mode */
+#define TUCR_NoMB (TUCR_MR*0) /* No Memory Bus request & grant */
+#define TUCR_MBGPIO (TUCR_MR*1) /* Memory Bus request (MBREQ) & */
+ /* grant (MBGNT) on GPIO [22:21] */
+#define TUCR_CTB Fld (3, 20) /* Clock Test Bits */
+#define TUCR_FDC 0x00800000 /* RTC Force Delete Count */
+#define TUCR_FMC 0x01000000 /* Force Michelle's Control mode */
+#define TUCR_TMC 0x02000000 /* RTC Trimmer Multiplexer Control */
+#define TUCR_DPS 0x04000000 /* Disallow Pad Sleep */
+#define TUCR_TSEL Fld (3, 29) /* clock Test SELect on GPIO [27] */
+#define TUCR_32_768kHz /* 32.768 kHz osc. on GPIO [27] */ \
+ (0 << FShft (TUCR_TSEL))
+#define TUCR_3_6864MHz /* 3.6864 MHz osc. on GPIO [27] */ \
+ (1 << FShft (TUCR_TSEL))
+#define TUCR_VDD /* VDD ring osc./16 on GPIO [27] */ \
+ (2 << FShft (TUCR_TSEL))
+#define TUCR_96MHzPLL /* 96 MHz PLL/4 on GPIO [27] */ \
+ (3 << FShft (TUCR_TSEL))
+#define TUCR_Clock /* internal (fcpu/2) & 32.768 kHz */ \
+ /* Clocks on GPIO [26:27] */ \
+ (4 << FShft (TUCR_TSEL))
+#define TUCR_3_6864MHzA /* 3.6864 MHz osc. on GPIO [27] */ \
+ /* (Alternative) */ \
+ (5 << FShft (TUCR_TSEL))
+#define TUCR_MainPLL /* Main PLL/16 on GPIO [27] */ \
+ (6 << FShft (TUCR_TSEL))
+#define TUCR_VDDL /* VDDL ring osc./4 on GPIO [27] */ \
+ (7 << FShft (TUCR_TSEL))
+
+
+/*
+ * General-Purpose Input/Output (GPIO) control registers
+ *
+ * Registers
+ * GPLR General-Purpose Input/Output (GPIO) Pin Level
+ * Register (read).
+ * GPDR General-Purpose Input/Output (GPIO) Pin Direction
+ * Register (read/write).
+ * GPSR General-Purpose Input/Output (GPIO) Pin output Set
+ * Register (write).
+ * GPCR General-Purpose Input/Output (GPIO) Pin output Clear
+ * Register (write).
+ * GRER General-Purpose Input/Output (GPIO) Rising-Edge
+ * detect Register (read/write).
+ * GFER General-Purpose Input/Output (GPIO) Falling-Edge
+ * detect Register (read/write).
+ * GEDR General-Purpose Input/Output (GPIO) Edge Detect
+ * status Register (read/write).
+ * GAFR General-Purpose Input/Output (GPIO) Alternate
+ * Function Register (read/write).
+ *
+ * Clock
+ * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
+ */
+
+#define GPLR __REG(0x90040000) /* GPIO Pin Level Reg. */
+#define GPDR __REG(0x90040004) /* GPIO Pin Direction Reg. */
+#define GPSR __REG(0x90040008) /* GPIO Pin output Set Reg. */
+#define GPCR __REG(0x9004000C) /* GPIO Pin output Clear Reg. */
+#define GRER __REG(0x90040010) /* GPIO Rising-Edge detect Reg. */
+#define GFER __REG(0x90040014) /* GPIO Falling-Edge detect Reg. */
+#define GEDR __REG(0x90040018) /* GPIO Edge Detect status Reg. */
+#define GAFR __REG(0x9004001C) /* GPIO Alternate Function Reg. */
+
+#define GPIO_MIN (0)
+#define GPIO_MAX (27)
+
+#define GPIO_GPIO(Nb) /* GPIO [0..27] */ \
+ (0x00000001 << (Nb))
+#define GPIO_GPIO0 GPIO_GPIO (0) /* GPIO [0] */
+#define GPIO_GPIO1 GPIO_GPIO (1) /* GPIO [1] */
+#define GPIO_GPIO2 GPIO_GPIO (2) /* GPIO [2] */
+#define GPIO_GPIO3 GPIO_GPIO (3) /* GPIO [3] */
+#define GPIO_GPIO4 GPIO_GPIO (4) /* GPIO [4] */
+#define GPIO_GPIO5 GPIO_GPIO (5) /* GPIO [5] */
+#define GPIO_GPIO6 GPIO_GPIO (6) /* GPIO [6] */
+#define GPIO_GPIO7 GPIO_GPIO (7) /* GPIO [7] */
+#define GPIO_GPIO8 GPIO_GPIO (8) /* GPIO [8] */
+#define GPIO_GPIO9 GPIO_GPIO (9) /* GPIO [9] */
+#define GPIO_GPIO10 GPIO_GPIO (10) /* GPIO [10] */
+#define GPIO_GPIO11 GPIO_GPIO (11) /* GPIO [11] */
+#define GPIO_GPIO12 GPIO_GPIO (12) /* GPIO [12] */
+#define GPIO_GPIO13 GPIO_GPIO (13) /* GPIO [13] */
+#define GPIO_GPIO14 GPIO_GPIO (14) /* GPIO [14] */
+#define GPIO_GPIO15 GPIO_GPIO (15) /* GPIO [15] */
+#define GPIO_GPIO16 GPIO_GPIO (16) /* GPIO [16] */
+#define GPIO_GPIO17 GPIO_GPIO (17) /* GPIO [17] */
+#define GPIO_GPIO18 GPIO_GPIO (18) /* GPIO [18] */
+#define GPIO_GPIO19 GPIO_GPIO (19) /* GPIO [19] */
+#define GPIO_GPIO20 GPIO_GPIO (20) /* GPIO [20] */
+#define GPIO_GPIO21 GPIO_GPIO (21) /* GPIO [21] */
+#define GPIO_GPIO22 GPIO_GPIO (22) /* GPIO [22] */
+#define GPIO_GPIO23 GPIO_GPIO (23) /* GPIO [23] */
+#define GPIO_GPIO24 GPIO_GPIO (24) /* GPIO [24] */
+#define GPIO_GPIO25 GPIO_GPIO (25) /* GPIO [25] */
+#define GPIO_GPIO26 GPIO_GPIO (26) /* GPIO [26] */
+#define GPIO_GPIO27 GPIO_GPIO (27) /* GPIO [27] */
+
+#define GPIO_LDD(Nb) /* LCD Data [8..15] (O) */ \
+ GPIO_GPIO ((Nb) - 6)
+#define GPIO_LDD8 GPIO_LDD (8) /* LCD Data [8] (O) */
+#define GPIO_LDD9 GPIO_LDD (9) /* LCD Data [9] (O) */
+#define GPIO_LDD10 GPIO_LDD (10) /* LCD Data [10] (O) */
+#define GPIO_LDD11 GPIO_LDD (11) /* LCD Data [11] (O) */
+#define GPIO_LDD12 GPIO_LDD (12) /* LCD Data [12] (O) */
+#define GPIO_LDD13 GPIO_LDD (13) /* LCD Data [13] (O) */
+#define GPIO_LDD14 GPIO_LDD (14) /* LCD Data [14] (O) */
+#define GPIO_LDD15 GPIO_LDD (15) /* LCD Data [15] (O) */
+ /* ser. port 4: */
+#define GPIO_SSP_TXD GPIO_GPIO (10) /* SSP Transmit Data (O) */
+#define GPIO_SSP_RXD GPIO_GPIO (11) /* SSP Receive Data (I) */
+#define GPIO_SSP_SCLK GPIO_GPIO (12) /* SSP Sample CLocK (O) */
+#define GPIO_SSP_SFRM GPIO_GPIO (13) /* SSP Sample FRaMe (O) */
+ /* ser. port 1: */
+#define GPIO_UART_TXD GPIO_GPIO (14) /* UART Transmit Data (O) */
+#define GPIO_UART_RXD GPIO_GPIO (15) /* UART Receive Data (I) */
+#define GPIO_SDLC_SCLK GPIO_GPIO (16) /* SDLC Sample CLocK (I/O) */
+#define GPIO_SDLC_AAF GPIO_GPIO (17) /* SDLC Abort After Frame (O) */
+#define GPIO_UART_SCLK1 GPIO_GPIO (18) /* UART Sample CLocK 1 (I) */
+ /* ser. port 4: */
+#define GPIO_SSP_CLK GPIO_GPIO (19) /* SSP external CLocK (I) */
+ /* ser. port 3: */
+#define GPIO_UART_SCLK3 GPIO_GPIO (20) /* UART Sample CLocK 3 (I) */
+ /* ser. port 4: */
+#define GPIO_MCP_CLK GPIO_GPIO (21) /* MCP CLocK (I) */
+ /* test controller: */
+#define GPIO_TIC_ACK GPIO_GPIO (21) /* TIC ACKnowledge (O) */
+#define GPIO_MBGNT GPIO_GPIO (21) /* Memory Bus GraNT (O) */
+#define GPIO_TREQA GPIO_GPIO (22) /* TIC REQuest A (I) */
+#define GPIO_MBREQ GPIO_GPIO (22) /* Memory Bus REQuest (I) */
+#define GPIO_TREQB GPIO_GPIO (23) /* TIC REQuest B (I) */
+#define GPIO_1Hz GPIO_GPIO (25) /* 1 Hz clock (O) */
+#define GPIO_RCLK GPIO_GPIO (26) /* internal (R) CLocK (O, fcpu/2) */
+#define GPIO_32_768kHz GPIO_GPIO (27) /* 32.768 kHz clock (O, RTC) */
+
+#define GPDR_In 0 /* Input */
+#define GPDR_Out 1 /* Output */
+
+
+/*
+ * Interrupt Controller (IC) control registers
+ *
+ * Registers
+ * ICIP Interrupt Controller (IC) Interrupt ReQuest (IRQ)
+ * Pending register (read).
+ * ICMR Interrupt Controller (IC) Mask Register (read/write).
+ * ICLR Interrupt Controller (IC) Level Register (read/write).
+ * ICCR Interrupt Controller (IC) Control Register
+ * (read/write).
+ * [The ICCR register is only implemented in versions 2.0
+ * (rev. = 8) and higher of the StrongARM SA-1100.]
+ * ICFP Interrupt Controller (IC) Fast Interrupt reQuest
+ * (FIQ) Pending register (read).
+ * ICPR Interrupt Controller (IC) Pending Register (read).
+ * [The ICPR register is active low (inverted) in
+ * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ * StrongARM SA-1100, it is active high (non-inverted) in
+ * versions 2.0 (rev. = 8) and higher.]
+ */
+
+#define ICIP __REG(0x90050000) /* IC IRQ Pending reg. */
+#define ICMR __REG(0x90050004) /* IC Mask Reg. */
+#define ICLR __REG(0x90050008) /* IC Level Reg. */
+#define ICCR __REG(0x9005000C) /* IC Control Reg. */
+#define ICFP __REG(0x90050010) /* IC FIQ Pending reg. */
+#define ICPR __REG(0x90050020) /* IC Pending Reg. */
+
+#define IC_GPIO(Nb) /* GPIO [0..10] */ \
+ (0x00000001 << (Nb))
+#define IC_GPIO0 IC_GPIO (0) /* GPIO [0] */
+#define IC_GPIO1 IC_GPIO (1) /* GPIO [1] */
+#define IC_GPIO2 IC_GPIO (2) /* GPIO [2] */
+#define IC_GPIO3 IC_GPIO (3) /* GPIO [3] */
+#define IC_GPIO4 IC_GPIO (4) /* GPIO [4] */
+#define IC_GPIO5 IC_GPIO (5) /* GPIO [5] */
+#define IC_GPIO6 IC_GPIO (6) /* GPIO [6] */
+#define IC_GPIO7 IC_GPIO (7) /* GPIO [7] */
+#define IC_GPIO8 IC_GPIO (8) /* GPIO [8] */
+#define IC_GPIO9 IC_GPIO (9) /* GPIO [9] */
+#define IC_GPIO10 IC_GPIO (10) /* GPIO [10] */
+#define IC_GPIO11_27 0x00000800 /* GPIO [11:27] (ORed) */
+#define IC_LCD 0x00001000 /* LCD controller */
+#define IC_Ser0UDC 0x00002000 /* Ser. port 0 UDC */
+#define IC_Ser1SDLC 0x00004000 /* Ser. port 1 SDLC */
+#define IC_Ser1UART 0x00008000 /* Ser. port 1 UART */
+#define IC_Ser2ICP 0x00010000 /* Ser. port 2 ICP */
+#define IC_Ser3UART 0x00020000 /* Ser. port 3 UART */
+#define IC_Ser4MCP 0x00040000 /* Ser. port 4 MCP */
+#define IC_Ser4SSP 0x00080000 /* Ser. port 4 SSP */
+#define IC_DMA(Nb) /* DMA controller channel [0..5] */ \
+ (0x00100000 << (Nb))
+#define IC_DMA0 IC_DMA (0) /* DMA controller channel 0 */
+#define IC_DMA1 IC_DMA (1) /* DMA controller channel 1 */
+#define IC_DMA2 IC_DMA (2) /* DMA controller channel 2 */
+#define IC_DMA3 IC_DMA (3) /* DMA controller channel 3 */
+#define IC_DMA4 IC_DMA (4) /* DMA controller channel 4 */
+#define IC_DMA5 IC_DMA (5) /* DMA controller channel 5 */
+#define IC_OST(Nb) /* OS Timer match [0..3] */ \
+ (0x04000000 << (Nb))
+#define IC_OST0 IC_OST (0) /* OS Timer match 0 */
+#define IC_OST1 IC_OST (1) /* OS Timer match 1 */
+#define IC_OST2 IC_OST (2) /* OS Timer match 2 */
+#define IC_OST3 IC_OST (3) /* OS Timer match 3 */
+#define IC_RTC1Hz 0x40000000 /* RTC 1 Hz clock */
+#define IC_RTCAlrm 0x80000000 /* RTC Alarm */
+
+#define ICLR_IRQ 0 /* Interrupt ReQuest */
+#define ICLR_FIQ 1 /* Fast Interrupt reQuest */
+
+#define ICCR_DIM 0x00000001 /* Disable Idle-mode interrupt */
+ /* Mask */
+#define ICCR_IdleAllInt (ICCR_DIM*0) /* Idle-mode All Interrupt enable */
+ /* (ICMR ignored) */
+#define ICCR_IdleMskInt (ICCR_DIM*1) /* Idle-mode non-Masked Interrupt */
+ /* enable (ICMR used) */
+
+
+/*
+ * Peripheral Pin Controller (PPC) control registers
+ *
+ * Registers
+ * PPDR Peripheral Pin Controller (PPC) Pin Direction
+ * Register (read/write).
+ * PPSR Peripheral Pin Controller (PPC) Pin State Register
+ * (read/write).
+ * PPAR Peripheral Pin Controller (PPC) Pin Assignment
+ * Register (read/write).
+ * PSDR Peripheral Pin Controller (PPC) Sleep-mode pin
+ * Direction Register (read/write).
+ * PPFR Peripheral Pin Controller (PPC) Pin Flag Register
+ * (read).
+ */
+
+#define PPDR __REG(0x90060000) /* PPC Pin Direction Reg. */
+#define PPSR __REG(0x90060004) /* PPC Pin State Reg. */
+#define PPAR __REG(0x90060008) /* PPC Pin Assignment Reg. */
+#define PSDR __REG(0x9006000C) /* PPC Sleep-mode pin Direction Reg. */
+#define PPFR __REG(0x90060010) /* PPC Pin Flag Reg. */
+
+#define PPC_LDD(Nb) /* LCD Data [0..7] */ \
+ (0x00000001 << (Nb))
+#define PPC_LDD0 PPC_LDD (0) /* LCD Data [0] */
+#define PPC_LDD1 PPC_LDD (1) /* LCD Data [1] */
+#define PPC_LDD2 PPC_LDD (2) /* LCD Data [2] */
+#define PPC_LDD3 PPC_LDD (3) /* LCD Data [3] */
+#define PPC_LDD4 PPC_LDD (4) /* LCD Data [4] */
+#define PPC_LDD5 PPC_LDD (5) /* LCD Data [5] */
+#define PPC_LDD6 PPC_LDD (6) /* LCD Data [6] */
+#define PPC_LDD7 PPC_LDD (7) /* LCD Data [7] */
+#define PPC_L_PCLK 0x00000100 /* LCD Pixel CLocK */
+#define PPC_L_LCLK 0x00000200 /* LCD Line CLocK */
+#define PPC_L_FCLK 0x00000400 /* LCD Frame CLocK */
+#define PPC_L_BIAS 0x00000800 /* LCD AC BIAS */
+ /* ser. port 1: */
+#define PPC_TXD1 0x00001000 /* SDLC/UART Transmit Data 1 */
+#define PPC_RXD1 0x00002000 /* SDLC/UART Receive Data 1 */
+ /* ser. port 2: */
+#define PPC_TXD2 0x00004000 /* IPC Transmit Data 2 */
+#define PPC_RXD2 0x00008000 /* IPC Receive Data 2 */
+ /* ser. port 3: */
+#define PPC_TXD3 0x00010000 /* UART Transmit Data 3 */
+#define PPC_RXD3 0x00020000 /* UART Receive Data 3 */
+ /* ser. port 4: */
+#define PPC_TXD4 0x00040000 /* MCP/SSP Transmit Data 4 */
+#define PPC_RXD4 0x00080000 /* MCP/SSP Receive Data 4 */
+#define PPC_SCLK 0x00100000 /* MCP/SSP Sample CLocK */
+#define PPC_SFRM 0x00200000 /* MCP/SSP Sample FRaMe */
+
+#define PPDR_In 0 /* Input */
+#define PPDR_Out 1 /* Output */
+
+ /* ser. port 1: */
+#define PPAR_UPR 0x00001000 /* UART Pin Reassignment */
+#define PPAR_UARTTR (PPAR_UPR*0) /* UART on TXD_1 & RXD_1 */
+#define PPAR_UARTGPIO (PPAR_UPR*1) /* UART on GPIO [14:15] */
+ /* ser. port 4: */
+#define PPAR_SPR 0x00040000 /* SSP Pin Reassignment */
+#define PPAR_SSPTRSS (PPAR_SPR*0) /* SSP on TXD_C, RXD_C, SCLK_C, */
+ /* & SFRM_C */
+#define PPAR_SSPGPIO (PPAR_SPR*1) /* SSP on GPIO [10:13] */
+
+#define PSDR_OutL 0 /* Output Low in sleep mode */
+#define PSDR_Flt 1 /* Floating (input) in sleep mode */
+
+#define PPFR_LCD 0x00000001 /* LCD controller */
+#define PPFR_SP1TX 0x00001000 /* Ser. Port 1 SDLC/UART Transmit */
+#define PPFR_SP1RX 0x00002000 /* Ser. Port 1 SDLC/UART Receive */
+#define PPFR_SP2TX 0x00004000 /* Ser. Port 2 ICP Transmit */
+#define PPFR_SP2RX 0x00008000 /* Ser. Port 2 ICP Receive */
+#define PPFR_SP3TX 0x00010000 /* Ser. Port 3 UART Transmit */
+#define PPFR_SP3RX 0x00020000 /* Ser. Port 3 UART Receive */
+#define PPFR_SP4 0x00040000 /* Ser. Port 4 MCP/SSP */
+#define PPFR_PerEn 0 /* Peripheral Enabled */
+#define PPFR_PPCEn 1 /* PPC Enabled */
+
+
+/*
+ * Dynamic Random-Access Memory (DRAM) control registers
+ *
+ * Registers
+ * MDCNFG Memory system: Dynamic Random-Access Memory (DRAM)
+ * CoNFiGuration register (read/write).
+ * MDCAS0 Memory system: Dynamic Random-Access Memory (DRAM)
+ * Column Address Strobe (CAS) shift register 0
+ * (read/write).
+ * MDCAS1 Memory system: Dynamic Random-Access Memory (DRAM)
+ * Column Address Strobe (CAS) shift register 1
+ * (read/write).
+ * MDCAS2 Memory system: Dynamic Random-Access Memory (DRAM)
+ * Column Address Strobe (CAS) shift register 2
+ * (read/write).
+ *
+ * Clocks
+ * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
+ * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
+ * fcas, Tcas Frequency, period of the DRAM CAS shift registers.
+ */
+
+#define MDCNFG __REG(0xA0000000) /* DRAM CoNFiGuration reg. */
+#define MDCAS0 __REG(0xA0000004) /* DRAM CAS shift reg. 0 */
+#define MDCAS1 __REG(0xA0000008) /* DRAM CAS shift reg. 1 */
+#define MDCAS2 __REG(0xA000000c) /* DRAM CAS shift reg. 2 */
+
+/* SA1100 MDCNFG values */
+#define MDCNFG_DE(Nb) /* DRAM Enable bank [0..3] */ \
+ (0x00000001 << (Nb))
+#define MDCNFG_DE0 MDCNFG_DE (0) /* DRAM Enable bank 0 */
+#define MDCNFG_DE1 MDCNFG_DE (1) /* DRAM Enable bank 1 */
+#define MDCNFG_DE2 MDCNFG_DE (2) /* DRAM Enable bank 2 */
+#define MDCNFG_DE3 MDCNFG_DE (3) /* DRAM Enable bank 3 */
+#define MDCNFG_DRAC Fld (2, 4) /* DRAM Row Address Count - 9 */
+#define MDCNFG_RowAdd(Add) /* Row Address count [9..12] */ \
+ (((Add) - 9) << FShft (MDCNFG_DRAC))
+#define MDCNFG_CDB2 0x00000040 /* shift reg. Clock Divide By 2 */
+ /* (fcas = fcpu/2) */
+#define MDCNFG_TRP Fld (4, 7) /* Time RAS Pre-charge - 1 [Tmem] */
+#define MDCNFG_PrChrg(Tcpu) /* Pre-Charge time [2..32 Tcpu] */ \
+ (((Tcpu) - 2)/2 << FShft (MDCNFG_TRP))
+#define MDCNFG_CeilPrChrg(Tcpu) /* Ceil. of PrChrg [2..32 Tcpu] */ \
+ (((Tcpu) - 1)/2 << FShft (MDCNFG_TRP))
+#define MDCNFG_TRASR Fld (4, 11) /* Time RAS Refresh - 1 [Tmem] */
+#define MDCNFG_Ref(Tcpu) /* Refresh time [2..32 Tcpu] */ \
+ (((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR))
+#define MDCNFG_CeilRef(Tcpu) /* Ceil. of Ref [2..32 Tcpu] */ \
+ (((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR))
+#define MDCNFG_TDL Fld (2, 15) /* Time Data Latch [Tcpu] */
+#define MDCNFG_DataLtch(Tcpu) /* Data Latch delay [0..3 Tcpu] */ \
+ ((Tcpu) << FShft (MDCNFG_TDL))
+#define MDCNFG_DRI Fld (15, 17) /* min. DRAM Refresh Interval/4 */
+ /* [Tmem] */
+#define MDCNFG_RefInt(Tcpu) /* min. Refresh Interval */ \
+ /* [0..262136 Tcpu] */ \
+ ((Tcpu)/8 << FShft (MDCNFG_DRI))
+
+/* SA1110 MDCNFG values */
+#define MDCNFG_SA1110_DE0 0x00000001 /* DRAM Enable bank 0 */
+#define MDCNFG_SA1110_DE1 0x00000002 /* DRAM Enable bank 1 */
+#define MDCNFG_SA1110_DTIM0 0x00000004 /* DRAM timing type 0/1 */
+#define MDCNFG_SA1110_DWID0 0x00000008 /* DRAM bus width 0/1 */
+#define MDCNFG_SA1110_DRAC0 Fld(3, 4) /* DRAM row addr bit count */
+ /* bank 0/1 */
+#define MDCNFG_SA1110_CDB20 0x00000080 /* Mem Clock divide by 2 0/1 */
+#define MDCNFG_SA1110_TRP0 Fld(3, 8) /* RAS precharge 0/1 */
+#define MDCNFG_SA1110_TDL0 Fld(2, 12) /* Data input latch after CAS*/
+ /* deassertion 0/1 */
+#define MDCNFG_SA1110_TWR0 Fld(2, 14) /* SDRAM write recovery 0/1 */
+#define MDCNFG_SA1110_DE2 0x00010000 /* DRAM Enable bank 0 */
+#define MDCNFG_SA1110_DE3 0x00020000 /* DRAM Enable bank 1 */
+#define MDCNFG_SA1110_DTIM2 0x00040000 /* DRAM timing type 0/1 */
+#define MDCNFG_SA1110_DWID2 0x00080000 /* DRAM bus width 0/1 */
+#define MDCNFG_SA1110_DRAC2 Fld(3, 20) /* DRAM row addr bit count */
+ /* bank 0/1 */
+#define MDCNFG_SA1110_CDB22 0x00800000 /* Mem Clock divide by 2 0/1 */
+#define MDCNFG_SA1110_TRP2 Fld(3, 24) /* RAS precharge 0/1 */
+#define MDCNFG_SA1110_TDL2 Fld(2, 28) /* Data input latch after CAS*/
+ /* deassertion 0/1 */
+#define MDCNFG_SA1110_TWR2 Fld(2, 30) /* SDRAM write recovery 0/1 */
+
+
+/*
+ * Static memory control registers
+ *
+ * Registers
+ * MSC0 Memory system: Static memory Control register 0
+ * (read/write).
+ * MSC1 Memory system: Static memory Control register 1
+ * (read/write).
+ *
+ * Clocks
+ * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
+ * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
+ */
+
+#define MSC0 __REG(0xa0000010) /* Static memory Control reg. 0 */
+#define MSC1 __REG(0xa0000014) /* Static memory Control reg. 1 */
+#define MSC2 __REG(0xa000002c) /* Static memory Control reg. 2, not contiguous */
+
+#define MSC_Bnk(Nb) /* static memory Bank [0..3] */ \
+ Fld (16, ((Nb) Modulo 2)*16)
+#define MSC0_Bnk0 MSC_Bnk (0) /* static memory Bank 0 */
+#define MSC0_Bnk1 MSC_Bnk (1) /* static memory Bank 1 */
+#define MSC1_Bnk2 MSC_Bnk (2) /* static memory Bank 2 */
+#define MSC1_Bnk3 MSC_Bnk (3) /* static memory Bank 3 */
+
+#define MSC_RT Fld (2, 0) /* ROM/static memory Type */
+#define MSC_NonBrst /* Non-Burst static memory */ \
+ (0 << FShft (MSC_RT))
+#define MSC_SRAM /* 32-bit byte-writable SRAM */ \
+ (1 << FShft (MSC_RT))
+#define MSC_Brst4 /* Burst-of-4 static memory */ \
+ (2 << FShft (MSC_RT))
+#define MSC_Brst8 /* Burst-of-8 static memory */ \
+ (3 << FShft (MSC_RT))
+#define MSC_RBW 0x0004 /* ROM/static memory Bus Width */
+#define MSC_32BitStMem (MSC_RBW*0) /* 32-Bit Static Memory */
+#define MSC_16BitStMem (MSC_RBW*1) /* 16-Bit Static Memory */
+#define MSC_RDF Fld (5, 3) /* ROM/static memory read Delay */
+ /* First access - 1(.5) [Tmem] */
+#define MSC_1stRdAcc(Tcpu) /* 1st Read Access time (burst */ \
+ /* static memory) [3..65 Tcpu] */ \
+ ((((Tcpu) - 3)/2) << FShft (MSC_RDF))
+#define MSC_Ceil1stRdAcc(Tcpu) /* Ceil. of 1stRdAcc [3..65 Tcpu] */ \
+ ((((Tcpu) - 2)/2) << FShft (MSC_RDF))
+#define MSC_RdAcc(Tcpu) /* Read Access time (non-burst */ \
+ /* static memory) [2..64 Tcpu] */ \
+ ((((Tcpu) - 2)/2) << FShft (MSC_RDF))
+#define MSC_CeilRdAcc(Tcpu) /* Ceil. of RdAcc [2..64 Tcpu] */ \
+ ((((Tcpu) - 1)/2) << FShft (MSC_RDF))
+#define MSC_RDN Fld (5, 8) /* ROM/static memory read Delay */
+ /* Next access - 1 [Tmem] */
+#define MSC_NxtRdAcc(Tcpu) /* Next Read Access time (burst */ \
+ /* static memory) [2..64 Tcpu] */ \
+ ((((Tcpu) - 2)/2) << FShft (MSC_RDN))
+#define MSC_CeilNxtRdAcc(Tcpu) /* Ceil. of NxtRdAcc [2..64 Tcpu] */ \
+ ((((Tcpu) - 1)/2) << FShft (MSC_RDN))
+#define MSC_WrAcc(Tcpu) /* Write Access time (non-burst */ \
+ /* static memory) [2..64 Tcpu] */ \
+ ((((Tcpu) - 2)/2) << FShft (MSC_RDN))
+#define MSC_CeilWrAcc(Tcpu) /* Ceil. of WrAcc [2..64 Tcpu] */ \
+ ((((Tcpu) - 1)/2) << FShft (MSC_RDN))
+#define MSC_RRR Fld (3, 13) /* ROM/static memory RecoveRy */
+ /* time/2 [Tmem] */
+#define MSC_Rec(Tcpu) /* Recovery time [0..28 Tcpu] */ \
+ (((Tcpu)/4) << FShft (MSC_RRR))
+#define MSC_CeilRec(Tcpu) /* Ceil. of Rec [0..28 Tcpu] */ \
+ ((((Tcpu) + 3)/4) << FShft (MSC_RRR))
+
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) control
+ * register
+ *
+ * Register
+ * MECR Memory system: Expansion memory bus (PCMCIA)
+ * Configuration Register (read/write).
+ *
+ * Clocks
+ * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
+ * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
+ * fbclk, Tbclk Frequency, period of the PCMCIA clock (BCLK).
+ */
+
+ /* Memory system: */
+#define MECR __REG(0xA0000018) /* Expansion memory bus (PCMCIA) Configuration Reg. */
+
+#define MECR_PCMCIA(Nb) /* PCMCIA [0..1] */ \
+ Fld (15, (Nb)*16)
+#define MECR_PCMCIA0 MECR_PCMCIA (0) /* PCMCIA 0 */
+#define MECR_PCMCIA1 MECR_PCMCIA (1) /* PCMCIA 1 */
+
+#define MECR_BSIO Fld (5, 0) /* BCLK Select I/O - 1 [Tmem] */
+#define MECR_IOClk(Tcpu) /* I/O Clock [2..64 Tcpu] */ \
+ ((((Tcpu) - 2)/2) << FShft (MECR_BSIO))
+#define MECR_CeilIOClk(Tcpu) /* Ceil. of IOClk [2..64 Tcpu] */ \
+ ((((Tcpu) - 1)/2) << FShft (MECR_BSIO))
+#define MECR_BSA Fld (5, 5) /* BCLK Select Attribute - 1 */
+ /* [Tmem] */
+#define MECR_AttrClk(Tcpu) /* Attribute Clock [2..64 Tcpu] */ \
+ ((((Tcpu) - 2)/2) << FShft (MECR_BSA))
+#define MECR_CeilAttrClk(Tcpu) /* Ceil. of AttrClk [2..64 Tcpu] */ \
+ ((((Tcpu) - 1)/2) << FShft (MECR_BSA))
+#define MECR_BSM Fld (5, 10) /* BCLK Select Memory - 1 [Tmem] */
+#define MECR_MemClk(Tcpu) /* Memory Clock [2..64 Tcpu] */ \
+ ((((Tcpu) - 2)/2) << FShft (MECR_BSM))
+#define MECR_CeilMemClk(Tcpu) /* Ceil. of MemClk [2..64 Tcpu] */ \
+ ((((Tcpu) - 1)/2) << FShft (MECR_BSM))
+
+/*
+ * On SA1110 only
+ */
+
+#define MDREFR __REG(0xA000001C)
+
+#define MDREFR_TRASR Fld (4, 0)
+#define MDREFR_DRI Fld (12, 4)
+#define MDREFR_E0PIN (1 << 16)
+#define MDREFR_K0RUN (1 << 17)
+#define MDREFR_K0DB2 (1 << 18)
+#define MDREFR_E1PIN (1 << 20)
+#define MDREFR_K1RUN (1 << 21)
+#define MDREFR_K1DB2 (1 << 22)
+#define MDREFR_K2RUN (1 << 25)
+#define MDREFR_K2DB2 (1 << 26)
+#define MDREFR_EAPD (1 << 28)
+#define MDREFR_KAPD (1 << 29)
+#define MDREFR_SLFRSH (1 << 31)
+
+
+/*
+ * Direct Memory Access (DMA) control registers
+ */
+#define DMA_SIZE (6 * 0x20)
+#define DMA_PHYS 0xb0000000
+
+
+/*
+ * Liquid Crystal Display (LCD) control registers
+ *
+ * Registers
+ * LCCR0 Liquid Crystal Display (LCD) Control Register 0
+ * (read/write).
+ * [Bits LDM, BAM, and ERM are only implemented in
+ * versions 2.0 (rev. = 8) and higher of the StrongARM
+ * SA-1100.]
+ * LCSR Liquid Crystal Display (LCD) Status Register
+ * (read/write).
+ * [Bit LDD can be only read in versions 1.0 (rev. = 1)
+ * and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be
+ * read and written (cleared) in versions 2.0 (rev. = 8)
+ * and higher.]
+ * DBAR1 Liquid Crystal Display (LCD) Direct Memory Access
+ * (DMA) Base Address Register channel 1 (read/write).
+ * DCAR1 Liquid Crystal Display (LCD) Direct Memory Access
+ * (DMA) Current Address Register channel 1 (read).
+ * DBAR2 Liquid Crystal Display (LCD) Direct Memory Access
+ * (DMA) Base Address Register channel 2 (read/write).
+ * DCAR2 Liquid Crystal Display (LCD) Direct Memory Access
+ * (DMA) Current Address Register channel 2 (read).
+ * LCCR1 Liquid Crystal Display (LCD) Control Register 1
+ * (read/write).
+ * [The LCCR1 register can be only written in
+ * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ * StrongARM SA-1100, it can be written and read in
+ * versions 2.0 (rev. = 8) and higher.]
+ * LCCR2 Liquid Crystal Display (LCD) Control Register 2
+ * (read/write).
+ * [The LCCR1 register can be only written in
+ * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ * StrongARM SA-1100, it can be written and read in
+ * versions 2.0 (rev. = 8) and higher.]
+ * LCCR3 Liquid Crystal Display (LCD) Control Register 3
+ * (read/write).
+ * [The LCCR1 register can be only written in
+ * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ * StrongARM SA-1100, it can be written and read in
+ * versions 2.0 (rev. = 8) and higher. Bit PCP is only
+ * implemented in versions 2.0 (rev. = 8) and higher of
+ * the StrongARM SA-1100.]
+ *
+ * Clocks
+ * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK).
+ * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2).
+ * fpix, Tpix Frequency, period of the pixel clock.
+ * fln, Tln Frequency, period of the line clock.
+ * fac, Tac Frequency, period of the AC bias clock.
+ */
+
+#define LCD_PEntrySp 2 /* LCD Palette Entry Space [byte] */
+#define LCD_4BitPSp /* LCD 4-Bit pixel Palette Space */ \
+ /* [byte] */ \
+ (16*LCD_PEntrySp)
+#define LCD_8BitPSp /* LCD 8-Bit pixel Palette Space */ \
+ /* [byte] */ \
+ (256*LCD_PEntrySp)
+#define LCD_12_16BitPSp /* LCD 12/16-Bit pixel */ \
+ /* dummy-Palette Space [byte] */ \
+ (16*LCD_PEntrySp)
+
+#define LCD_PGrey Fld (4, 0) /* LCD Palette entry Grey value */
+#define LCD_PBlue Fld (4, 0) /* LCD Palette entry Blue value */
+#define LCD_PGreen Fld (4, 4) /* LCD Palette entry Green value */
+#define LCD_PRed Fld (4, 8) /* LCD Palette entry Red value */
+#define LCD_PBS Fld (2, 12) /* LCD Pixel Bit Size */
+#define LCD_4Bit /* LCD 4-Bit pixel mode */ \
+ (0 << FShft (LCD_PBS))
+#define LCD_8Bit /* LCD 8-Bit pixel mode */ \
+ (1 << FShft (LCD_PBS))
+#define LCD_12_16Bit /* LCD 12/16-Bit pixel mode */ \
+ (2 << FShft (LCD_PBS))
+
+#define LCD_Int0_0 0x0 /* LCD Intensity = 0.0% = 0 */
+#define LCD_Int11_1 0x1 /* LCD Intensity = 11.1% = 1/9 */
+#define LCD_Int20_0 0x2 /* LCD Intensity = 20.0% = 1/5 */
+#define LCD_Int26_7 0x3 /* LCD Intensity = 26.7% = 4/15 */
+#define LCD_Int33_3 0x4 /* LCD Intensity = 33.3% = 3/9 */
+#define LCD_Int40_0 0x5 /* LCD Intensity = 40.0% = 2/5 */
+#define LCD_Int44_4 0x6 /* LCD Intensity = 44.4% = 4/9 */
+#define LCD_Int50_0 0x7 /* LCD Intensity = 50.0% = 1/2 */
+#define LCD_Int55_6 0x8 /* LCD Intensity = 55.6% = 5/9 */
+#define LCD_Int60_0 0x9 /* LCD Intensity = 60.0% = 3/5 */
+#define LCD_Int66_7 0xA /* LCD Intensity = 66.7% = 6/9 */
+#define LCD_Int73_3 0xB /* LCD Intensity = 73.3% = 11/15 */
+#define LCD_Int80_0 0xC /* LCD Intensity = 80.0% = 4/5 */
+#define LCD_Int88_9 0xD /* LCD Intensity = 88.9% = 8/9 */
+#define LCD_Int100_0 0xE /* LCD Intensity = 100.0% = 1 */
+#define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */
+ /* (Alternative) */
+
+#define LCCR0_LEN 0x00000001 /* LCD ENable */
+#define LCCR0_CMS 0x00000002 /* Color/Monochrome display Select */
+#define LCCR0_Color (LCCR0_CMS*0) /* Color display */
+#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */
+#define LCCR0_SDS 0x00000004 /* Single/Dual panel display */
+ /* Select */
+#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */
+#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */
+#define LCCR0_LDM 0x00000008 /* LCD Disable done (LDD) */
+ /* interrupt Mask (disable) */
+#define LCCR0_BAM 0x00000010 /* Base Address update (BAU) */
+ /* interrupt Mask (disable) */
+#define LCCR0_ERM 0x00000020 /* LCD ERror (BER, IOL, IUL, IOU, */
+ /* IUU, OOL, OUL, OOU, and OUU) */
+ /* interrupt Mask (disable) */
+#define LCCR0_PAS 0x00000080 /* Passive/Active display Select */
+#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */
+#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */
+#define LCCR0_BLE 0x00000100 /* Big/Little Endian select */
+#define LCCR0_LtlEnd (LCCR0_BLE*0) /* Little Endian frame buffer */
+#define LCCR0_BigEnd (LCCR0_BLE*1) /* Big Endian frame buffer */
+#define LCCR0_DPD 0x00000200 /* Double Pixel Data (monochrome */
+ /* display mode) */
+#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */
+ /* display */
+#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */
+ /* display */
+#define LCCR0_PDD Fld (8, 12) /* Palette DMA request Delay */
+ /* [Tmem] */
+#define LCCR0_DMADel(Tcpu) /* palette DMA request Delay */ \
+ /* [0..510 Tcpu] */ \
+ ((Tcpu)/2 << FShft (LCCR0_PDD))
+
+#define LCSR_LDD 0x00000001 /* LCD Disable Done */
+#define LCSR_BAU 0x00000002 /* Base Address Update (read) */
+#define LCSR_BER 0x00000004 /* Bus ERror */
+#define LCSR_ABC 0x00000008 /* AC Bias clock Count */
+#define LCSR_IOL 0x00000010 /* Input FIFO Over-run Lower */
+ /* panel */
+#define LCSR_IUL 0x00000020 /* Input FIFO Under-run Lower */
+ /* panel */
+#define LCSR_IOU 0x00000040 /* Input FIFO Over-run Upper */
+ /* panel */
+#define LCSR_IUU 0x00000080 /* Input FIFO Under-run Upper */
+ /* panel */
+#define LCSR_OOL 0x00000100 /* Output FIFO Over-run Lower */
+ /* panel */
+#define LCSR_OUL 0x00000200 /* Output FIFO Under-run Lower */
+ /* panel */
+#define LCSR_OOU 0x00000400 /* Output FIFO Over-run Upper */
+ /* panel */
+#define LCSR_OUU 0x00000800 /* Output FIFO Under-run Upper */
+ /* panel */
+
+#define LCCR1_PPL Fld (6, 4) /* Pixels Per Line/16 - 1 */
+#define LCCR1_DisWdth(Pixel) /* Display Width [16..1024 pix.] */ \
+ (((Pixel) - 16)/16 << FShft (LCCR1_PPL))
+#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */
+ /* pulse Width - 1 [Tpix] (L_LCLK) */
+#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \
+ /* pulse Width [1..64 Tpix] */ \
+ (((Tpix) - 1) << FShft (LCCR1_HSW))
+#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */
+ /* count - 1 [Tpix] */
+#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \
+ /* [1..256 Tpix] */ \
+ (((Tpix) - 1) << FShft (LCCR1_ELW))
+#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */
+ /* Wait count - 1 [Tpix] */
+#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \
+ /* [1..256 Tpix] */ \
+ (((Tpix) - 1) << FShft (LCCR1_BLW))
+
+#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */
+#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \
+ (((Line) - 1) << FShft (LCCR2_LPP))
+#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */
+ /* Width - 1 [Tln] (L_FCLK) */
+#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \
+ /* Width [1..64 Tln] */ \
+ (((Tln) - 1) << FShft (LCCR2_VSW))
+#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */
+ /* count [Tln] */
+#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \
+ /* [0..255 Tln] */ \
+ ((Tln) << FShft (LCCR2_EFW))
+#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */
+ /* Wait count [Tln] */
+#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \
+ /* [0..255 Tln] */ \
+ ((Tln) << FShft (LCCR2_BFW))
+
+#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor/2 - 2 */
+ /* [1..255] (L_PCLK) */
+ /* fpix = fcpu/(2*(PCD + 2)) */
+ /* Tpix = 2*(PCD + 2)*Tcpu */
+#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor [6..514] */ \
+ (((Div) - 4)/2 << FShft (LCCR3_PCD))
+ /* fpix = fcpu/(2*Floor (Div/2)) */
+ /* Tpix = 2*Floor (Div/2)*Tcpu */
+#define LCCR3_CeilPixClkDiv(Div) /* Ceil. of PixClkDiv [6..514] */ \
+ (((Div) - 3)/2 << FShft (LCCR3_PCD))
+ /* fpix = fcpu/(2*Ceil (Div/2)) */
+ /* Tpix = 2*Ceil (Div/2)*Tcpu */
+#define LCCR3_ACB Fld (8, 8) /* AC Bias clock half period - 1 */
+ /* [Tln] (L_BIAS) */
+#define LCCR3_ACBsDiv(Div) /* AC Bias clock Divisor [2..512] */ \
+ (((Div) - 2)/2 << FShft (LCCR3_ACB))
+ /* fac = fln/(2*Floor (Div/2)) */
+ /* Tac = 2*Floor (Div/2)*Tln */
+#define LCCR3_CeilACBsDiv(Div) /* Ceil. of ACBsDiv [2..512] */ \
+ (((Div) - 1)/2 << FShft (LCCR3_ACB))
+ /* fac = fln/(2*Ceil (Div/2)) */
+ /* Tac = 2*Ceil (Div/2)*Tln */
+#define LCCR3_API Fld (4, 16) /* AC bias Pin transitions per */
+ /* Interrupt */
+#define LCCR3_ACBsCntOff /* AC Bias clock transition Count */ \
+ /* Off */ \
+ (0 << FShft (LCCR3_API))
+#define LCCR3_ACBsCnt(Trans) /* AC Bias clock transition Count */ \
+ /* [1..15] */ \
+ ((Trans) << FShft (LCCR3_API))
+#define LCCR3_VSP 0x00100000 /* Vertical Synchronization pulse */
+ /* Polarity (L_FCLK) */
+#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */
+ /* active High */
+#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */
+ /* active Low */
+#define LCCR3_HSP 0x00200000 /* Horizontal Synchronization */
+ /* pulse Polarity (L_LCLK) */
+#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */
+ /* pulse active High */
+#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */
+ /* pulse active Low */
+#define LCCR3_PCP 0x00400000 /* Pixel Clock Polarity (L_PCLK) */
+#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */
+#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */
+#define LCCR3_OEP 0x00800000 /* Output Enable Polarity (L_BIAS, */
+ /* active display mode) */
+#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */
+#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1101.h b/arch/arm/mach-sa1100/include/mach/SA-1101.h
new file mode 100644
index 000000000..5d2ad7db9
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/SA-1101.h
@@ -0,0 +1,925 @@
+/*
+ * SA-1101.h
+ *
+ * Copyright (c) Peter Danielsson 1999
+ *
+ * Definition of constants related to the sa1101
+ * support chip for the sa1100
+ *
+ */
+
+
+/* Be sure that virtual mapping is defined right */
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not SA-1101.h
+#endif
+
+#ifndef SA1101_BASE
+#error You must define SA-1101 physical base address
+#endif
+
+#ifndef LANGUAGE
+# ifdef __ASSEMBLY__
+# define LANGUAGE Assembly
+# else
+# define LANGUAGE C
+# endif
+#endif
+
+/*
+ * We have mapped the sa1101 depending on the value of SA1101_BASE.
+ * It then appears from 0xf4000000.
+ */
+
+#define SA1101_p2v( x ) ((x) - SA1101_BASE + 0xf4000000)
+#define SA1101_v2p( x ) ((x) - 0xf4000000 + SA1101_BASE)
+
+#ifndef SA1101_p2v
+#define SA1101_p2v(PhAdd) (PhAdd)
+#endif
+
+#include <mach/bitfield.h>
+
+#define C 0
+#define Assembly 1
+
+
+/*
+ * Memory map
+ */
+
+#define __SHMEM_CONTROL0 0x00000000
+#define __SYSTEM_CONTROL1 0x00000400
+#define __ARBITER 0x00020000
+#define __SYSTEM_CONTROL2 0x00040000
+#define __SYSTEM_CONTROL3 0x00060000
+#define __PARALLEL_PORT 0x00080000
+#define __VIDMEM_CONTROL 0x00100000
+#define __UPDATE_FIFO 0x00120000
+#define __SHMEM_CONTROL1 0x00140000
+#define __INTERRUPT_CONTROL 0x00160000
+#define __USB_CONTROL 0x00180000
+#define __TRACK_INTERFACE 0x001a0000
+#define __MOUSE_INTERFACE 0x001b0000
+#define __KEYPAD_INTERFACE 0x001c0000
+#define __PCMCIA_INTERFACE 0x001e0000
+#define __VGA_CONTROL 0x00200000
+#define __GPIO_INTERFACE 0x00300000
+
+/*
+ * Macro that calculates real address for registers in the SA-1101
+ */
+
+#define _SA1101( x ) ((x) + SA1101_BASE)
+
+/*
+ * Interface and shared memory controller registers
+ *
+ * Registers
+ * SKCR SA-1101 control register (read/write)
+ * SMCR Shared Memory Controller Register
+ * SNPR Snoop Register
+ */
+
+#define _SKCR _SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
+#define _SMCR _SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
+#define _SNPR _SA1101( 0x00140400 ) /* Snoop Reg. */
+
+#if LANGUAGE == C
+#define SKCR (*((volatile Word *) SA1101_p2v (_SKCR)))
+#define SMCR (*((volatile Word *) SA1101_p2v (_SMCR)))
+#define SNPR (*((volatile Word *) SA1101_p2v (_SNPR)))
+
+#define SKCR_PLLEn 0x0001 /* Enable On-Chip PLL */
+#define SKCR_BCLKEn 0x0002 /* Enables BCLK */
+#define SKCR_Sleep 0x0004 /* Sleep Mode */
+#define SKCR_IRefEn 0x0008 /* DAC Iref input enable */
+#define SKCR_VCOON 0x0010 /* VCO bias */
+#define SKCR_ScanTestEn 0x0020 /* Enables scan test */
+#define SKCR_ClockTestEn 0x0040 /* Enables clock test */
+
+#define SMCR_DCAC Fld(2,0) /* Number of column address bits */
+#define SMCR_DRAC Fld(2,2) /* Number of row address bits */
+#define SMCR_ArbiterBias 0x0008 /* favor video or USB */
+#define SMCR_TopVidMem Fld(4,5) /* Top 4 bits of vidmem addr. */
+
+#define SMCR_ColAdrBits( x ) /* col. addr bits 8..11 */ \
+ (( (x) - 8 ) << FShft (SMCR_DCAC))
+#define SMCR_RowAdrBits( x ) /* row addr bits 9..12 */\
+ (( (x) - 9 ) << FShft (SMCR_DRAC))
+
+#define SNPR_VFBstart Fld(12,0) /* Video frame buffer addr */
+#define SNPR_VFBsize Fld(11,12) /* Video frame buffer size */
+#define SNPR_WholeBank (1 << 23) /* Whole bank bit */
+#define SNPR_BankSelect Fld(2,27) /* Bank select */
+#define SNPR_SnoopEn (1 << 31) /* Enable snoop operation */
+
+#define SNPR_Set_VFBsize( x ) /* set frame buffer size (in kb) */ \
+ ( (x) << FShft (SNPR_VFBsize))
+#define SNPR_Select_Bank(x) /* select bank 0 or 1 */ \
+ (( (x) + 1 ) << FShft (SNPR_BankSelect ))
+
+#endif /* LANGUAGE == C */
+
+/*
+ * Video Memory Controller
+ *
+ * Registers
+ * VMCCR Configuration register
+ * VMCAR VMC address register
+ * VMCDR VMC data register
+ *
+ */
+
+#define _VMCCR _SA1101( 0x00100000 ) /* Configuration register */
+#define _VMCAR _SA1101( 0x00101000 ) /* VMC address register */
+#define _VMCDR _SA1101( 0x00101400 ) /* VMC data register */
+
+#if LANGUAGE == C
+#define VMCCR (*((volatile Word *) SA1101_p2v (_VMCCR)))
+#define VMCAR (*((volatile Word *) SA1101_p2v (_VMCAR)))
+#define VMCDR (*((volatile Word *) SA1101_p2v (_VMCDR)))
+
+#define VMCCR_RefreshEn 0x0000 /* Enable memory refresh */
+#define VMCCR_Config 0x0001 /* DRAM size */
+#define VMCCR_RefPeriod Fld(2,3) /* Refresh period */
+#define VMCCR_StaleDataWait Fld(4,5) /* Stale FIFO data timeout counter */
+#define VMCCR_SleepState (1<<9) /* State of interface pins in sleep*/
+#define VMCCR_RefTest (1<<10) /* refresh test */
+#define VMCCR_RefLow Fld(6,11) /* refresh low counter */
+#define VMCCR_RefHigh Fld(7,17) /* refresh high counter */
+#define VMCCR_SDTCTest Fld(7,24) /* stale data timeout counter */
+#define VMCCR_ForceSelfRef (1<<31) /* Force self refresh */
+
+#endif LANGUAGE == C
+
+
+/* Update FIFO
+ *
+ * Registers
+ * UFCR Update FIFO Control Register
+ * UFSR Update FIFO Status Register
+ * UFLVLR update FIFO level register
+ * UFDR update FIFO data register
+ */
+
+#define _UFCR _SA1101(0x00120000) /* Update FIFO Control Reg. */
+#define _UFSR _SA1101(0x00120400) /* Update FIFO Status Reg. */
+#define _UFLVLR _SA1101(0x00120800) /* Update FIFO level reg. */
+#define _UFDR _SA1101(0x00120c00) /* Update FIFO data reg. */
+
+#if LANGUAGE == C
+
+#define UFCR (*((volatile Word *) SA1101_p2v (_UFCR)))
+#define UFSR (*((volatile Word *) SA1101_p2v (_UFSR)))
+#define UFLVLR (*((volatile Word *) SA1101_p2v (_UFLVLR)))
+#define UFDR (*((volatile Word *) SA1101_p2v (_UFDR)))
+
+
+#define UFCR_FifoThreshhold Fld(7,0) /* Level for FifoGTn flag */
+
+#define UFSR_FifoGTnFlag 0x01 /* FifoGTn flag */#define UFSR_FifoEmpty 0x80 /* FIFO is empty */
+
+#endif /* LANGUAGE == C */
+
+/* System Controller
+ *
+ * Registers
+ * SKPCR Power Control Register
+ * SKCDR Clock Divider Register
+ * DACDR1 DAC1 Data register
+ * DACDR2 DAC2 Data register
+ */
+
+#define _SKPCR _SA1101(0x00000400)
+#define _SKCDR _SA1101(0x00040000)
+#define _DACDR1 _SA1101(0x00060000)
+#define _DACDR2 _SA1101(0x00060400)
+
+#if LANGUAGE == C
+#define SKPCR (*((volatile Word *) SA1101_p2v (_SKPCR)))
+#define SKCDR (*((volatile Word *) SA1101_p2v (_SKCDR)))
+#define DACDR1 (*((volatile Word *) SA1101_p2v (_DACDR1)))
+#define DACDR2 (*((volatile Word *) SA1101_p2v (_DACDR2)))
+
+#define SKPCR_UCLKEn 0x01 /* USB Enable */
+#define SKPCR_PCLKEn 0x02 /* PS/2 Enable */
+#define SKPCR_ICLKEn 0x04 /* Interrupt Controller Enable */
+#define SKPCR_VCLKEn 0x08 /* Video Controller Enable */
+#define SKPCR_PICLKEn 0x10 /* parallel port Enable */
+#define SKPCR_DCLKEn 0x20 /* DACs Enable */
+#define SKPCR_nKPADEn 0x40 /* Multiplexer */
+
+#define SKCDR_PLLMul Fld(7,0) /* PLL Multiplier */
+#define SKCDR_VCLKEn Fld(2,7) /* Video controller clock divider */
+#define SKDCR_BCLKEn (1<<9) /* BCLK Divider */
+#define SKDCR_UTESTCLKEn (1<<10) /* Route USB clock during test mode */
+#define SKDCR_DivRValue Fld(6,11) /* Input clock divider for PLL */
+#define SKDCR_DivNValue Fld(5,17) /* Output clock divider for PLL */
+#define SKDCR_PLLRSH Fld(3,22) /* PLL bandwidth control */
+#define SKDCR_ChargePump (1<<25) /* Charge pump control */
+#define SKDCR_ClkTestMode (1<<26) /* Clock output test mode */
+#define SKDCR_ClkTestEn (1<<27) /* Test clock generator */
+#define SKDCR_ClkJitterCntl Fld(3,28) /* video clock jitter compensation */
+
+#define DACDR_DACCount Fld(8,0) /* Count value */
+#define DACDR1_DACCount DACDR_DACCount
+#define DACDR2_DACCount DACDR_DACCount
+
+#endif /* LANGUAGE == C */
+
+/*
+ * Parallel Port Interface
+ *
+ * Registers
+ * IEEE_Config IEEE mode selection and programmable attributes
+ * IEEE_Control Controls the states of IEEE port control outputs
+ * IEEE_Data Forward transfer data register
+ * IEEE_Addr Forward transfer address register
+ * IEEE_Status Port IO signal status register
+ * IEEE_IntStatus Port interrupts status register
+ * IEEE_FifoLevels Rx and Tx FIFO interrupt generation levels
+ * IEEE_InitTime Forward timeout counter initial value
+ * IEEE_TimerStatus Forward timeout counter current value
+ * IEEE_FifoReset Reset forward transfer FIFO
+ * IEEE_ReloadValue Counter reload value
+ * IEEE_TestControl Control testmode
+ * IEEE_TestDataIn Test data register
+ * IEEE_TestDataInEn Enable test data
+ * IEEE_TestCtrlIn Test control signals
+ * IEEE_TestCtrlInEn Enable test control signals
+ * IEEE_TestDataStat Current data bus value
+ *
+ */
+
+/*
+ * The control registers are defined as offsets from a base address
+ */
+
+#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
+
+#define _IEEE_Config _IEEE( 0x0000 )
+#define _IEEE_Control _IEEE( 0x0400 )
+#define _IEEE_Data _IEEE( 0x4000 )
+#define _IEEE_Addr _IEEE( 0x0800 )
+#define _IEEE_Status _IEEE( 0x0c00 )
+#define _IEEE_IntStatus _IEEE( 0x1000 )
+#define _IEEE_FifoLevels _IEEE( 0x1400 )
+#define _IEEE_InitTime _IEEE( 0x1800 )
+#define _IEEE_TimerStatus _IEEE( 0x1c00 )
+#define _IEEE_FifoReset _IEEE( 0x2000 )
+#define _IEEE_ReloadValue _IEEE( 0x3c00 )
+#define _IEEE_TestControl _IEEE( 0x2400 )
+#define _IEEE_TestDataIn _IEEE( 0x2800 )
+#define _IEEE_TestDataInEn _IEEE( 0x2c00 )
+#define _IEEE_TestCtrlIn _IEEE( 0x3000 )
+#define _IEEE_TestCtrlInEn _IEEE( 0x3400 )
+#define _IEEE_TestDataStat _IEEE( 0x3800 )
+
+
+#if LANGUAGE == C
+#define IEEE_Config (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
+#define IEEE_Control (*((volatile Word *) SA1101_p2v (_IEEE_Control)))
+#define IEEE_Data (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
+#define IEEE_Addr (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
+#define IEEE_Status (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
+#define IEEE_IntStatus (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus)))
+#define IEEE_FifoLevels (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels)))
+#define IEEE_InitTime (*((volatile Word *) SA1101_p2v (_IEEE_InitTime)))
+#define IEEE_TimerStatus (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus)))
+#define IEEE_FifoReset (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset)))
+#define IEEE_ReloadValue (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue)))
+#define IEEE_TestControl (*((volatile Word *) SA1101_p2v (_IEEE_TestControl)))
+#define IEEE_TestDataIn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn)))
+#define IEEE_TestDataInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn)))
+#define IEEE_TestCtrlIn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn)))
+#define IEEE_TestCtrlInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn)))
+#define IEEE_TestDataStat (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat)))
+
+
+#define IEEE_Config_M Fld(3,0) /* Mode select */
+#define IEEE_Config_D 0x04 /* FIFO access enable */
+#define IEEE_Config_B 0x08 /* 9-bit word enable */
+#define IEEE_Config_T 0x10 /* Data transfer enable */
+#define IEEE_Config_A 0x20 /* Data transfer direction */
+#define IEEE_Config_E 0x40 /* Timer enable */
+#define IEEE_Control_A 0x08 /* AutoFd output */
+#define IEEE_Control_E 0x04 /* Selectin output */
+#define IEEE_Control_T 0x02 /* Strobe output */
+#define IEEE_Control_I 0x01 /* Port init output */
+#define IEEE_Data_C (1<<31) /* Byte count */
+#define IEEE_Data_Db Fld(9,16) /* Data byte 2 */
+#define IEEE_Data_Da Fld(9,0) /* Data byte 1 */
+#define IEEE_Addr_A Fld(8,0) /* forward address transfer byte */
+#define IEEE_Status_A 0x0100 /* nAutoFd port output status */
+#define IEEE_Status_E 0x0080 /* nSelectIn port output status */
+#define IEEE_Status_T 0x0040 /* nStrobe port output status */
+#define IEEE_Status_I 0x0020 /* nInit port output status */
+#define IEEE_Status_B 0x0010 /* Busy port inout status */
+#define IEEE_Status_S 0x0008 /* Select port input status */
+#define IEEE_Status_K 0x0004 /* nAck port input status */
+#define IEEE_Status_F 0x0002 /* nFault port input status */
+#define IEEE_Status_R 0x0001 /* pError port input status */
+
+#define IEEE_IntStatus_IntReqDat 0x0100
+#define IEEE_IntStatus_IntReqEmp 0x0080
+#define IEEE_IntStatus_IntReqInt 0x0040
+#define IEEE_IntStatus_IntReqRav 0x0020
+#define IEEE_IntStatus_IntReqTim 0x0010
+#define IEEE_IntStatus_RevAddrComp 0x0008
+#define IEEE_IntStatus_RevDataComp 0x0004
+#define IEEE_IntStatus_FwdAddrComp 0x0002
+#define IEEE_IntStatus_FwdDataComp 0x0001
+#define IEEE_FifoLevels_RevFifoLevel 2
+#define IEEE_FifoLevels_FwdFifoLevel 1
+#define IEEE_InitTime_TimValInit Fld(22,0)
+#define IEEE_TimerStatus_TimValStat Fld(22,0)
+#define IEEE_ReloadValue_Reload Fld(4,0)
+
+#define IEEE_TestControl_RegClk 0x04
+#define IEEE_TestControl_ClockSelect Fld(2,1)
+#define IEEE_TestControl_TimerTestModeEn 0x01
+#define IEEE_TestCtrlIn_PError 0x10
+#define IEEE_TestCtrlIn_nFault 0x08
+#define IEEE_TestCtrlIn_nAck 0x04
+#define IEEE_TestCtrlIn_PSel 0x02
+#define IEEE_TestCtrlIn_Busy 0x01
+
+#endif /* LANGUAGE == C */
+
+/*
+ * VGA Controller
+ *
+ * Registers
+ * VideoControl Video Control Register
+ * VgaTiming0 VGA Timing Register 0
+ * VgaTiming1 VGA Timing Register 1
+ * VgaTiming2 VGA Timing Register 2
+ * VgaTiming3 VGA Timing Register 3
+ * VgaBorder VGA Border Color Register
+ * VgaDBAR VGADMA Base Address Register
+ * VgaDCAR VGADMA Channel Current Address Register
+ * VgaStatus VGA Status Register
+ * VgaInterruptMask VGA Interrupt Mask Register
+ * VgaPalette VGA Palette Registers
+ * DacControl DAC Control Register
+ * VgaTest VGA Controller Test Register
+ */
+
+#define _VGA( x ) _SA1101( ( x ) + __VGA_CONTROL )
+
+#define _VideoControl _VGA( 0x0000 )
+#define _VgaTiming0 _VGA( 0x0400 )
+#define _VgaTiming1 _VGA( 0x0800 )
+#define _VgaTiming2 _VGA( 0x0c00 )
+#define _VgaTiming3 _VGA( 0x1000 )
+#define _VgaBorder _VGA( 0x1400 )
+#define _VgaDBAR _VGA( 0x1800 )
+#define _VgaDCAR _VGA( 0x1c00 )
+#define _VgaStatus _VGA( 0x2000 )
+#define _VgaInterruptMask _VGA( 0x2400 )
+#define _VgaPalette _VGA( 0x40000 )
+#define _DacControl _VGA( 0x3000 )
+#define _VgaTest _VGA( 0x2c00 )
+
+#if (LANGUAGE == C)
+#define VideoControl (*((volatile Word *) SA1101_p2v (_VideoControl)))
+#define VgaTiming0 (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
+#define VgaTiming1 (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
+#define VgaTiming2 (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
+#define VgaTiming3 (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
+#define VgaBorder (*((volatile Word *) SA1101_p2v (_VgaBorder)))
+#define VgaDBAR (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
+#define VgaDCAR (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
+#define VgaStatus (*((volatile Word *) SA1101_p2v (_VgaStatus)))
+#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask)))
+#define VgaPalette (*((volatile Word *) SA1101_p2v (_VgaPalette)))
+#define DacControl (*((volatile Word *) SA1101_p2v (_DacControl)))
+#define VgaTest (*((volatile Word *) SA1101_p2v (_VgaTest)))
+
+#define VideoControl_VgaEn 0x00000000
+#define VideoControl_BGR 0x00000001
+#define VideoControl_VCompVal Fld(2,2)
+#define VideoControl_VgaReq Fld(4,4)
+#define VideoControl_VBurstL Fld(4,8)
+#define VideoControl_VMode (1<<12)
+#define VideoControl_PalRead (1<<13)
+
+#define VgaTiming0_PPL Fld(6,2)
+#define VgaTiming0_HSW Fld(8,8)
+#define VgaTiming0_HFP Fld(8,16)
+#define VgaTiming0_HBP Fld(8,24)
+
+#define VgaTiming1_LPS Fld(10,0)
+#define VgaTiming1_VSW Fld(6,10)
+#define VgaTiming1_VFP Fld(8,16)
+#define VgaTiming1_VBP Fld(8,24)
+
+#define VgaTiming2_IVS 0x01
+#define VgaTiming2_IHS 0x02
+#define VgaTiming2_CVS 0x04
+#define VgaTiming2_CHS 0x08
+
+#define VgaTiming3_HBS Fld(8,0)
+#define VgaTiming3_HBE Fld(8,8)
+#define VgaTiming3_VBS Fld(8,16)
+#define VgaTiming3_VBE Fld(8,24)
+
+#define VgaBorder_BCOL Fld(24,0)
+
+#define VgaStatus_VFUF 0x01
+#define VgaStatus_VNext 0x02
+#define VgaStatus_VComp 0x04
+
+#define VgaInterruptMask_VFUFMask 0x00
+#define VgaInterruptMask_VNextMask 0x01
+#define VgaInterruptMask_VCompMask 0x02
+
+#define VgaPalette_R Fld(8,0)
+#define VgaPalette_G Fld(8,8)
+#define VgaPalette_B Fld(8,16)
+
+#define DacControl_DACON 0x0001
+#define DacControl_COMPON 0x0002
+#define DacControl_PEDON 0x0004
+#define DacControl_RTrim Fld(5,4)
+#define DacControl_GTrim Fld(5,9)
+#define DacControl_BTrim Fld(5,14)
+
+#define VgaTest_TDAC 0x00
+#define VgaTest_Datatest Fld(4,1)
+#define VgaTest_DACTESTDAC 0x10
+#define VgaTest_DACTESTOUT Fld(3,5)
+
+#endif /* LANGUAGE == C */
+
+/*
+ * USB Host Interface Controller
+ *
+ * Registers
+ * Revision
+ * Control
+ * CommandStatus
+ * InterruptStatus
+ * InterruptEnable
+ * HCCA
+ * PeriodCurrentED
+ * ControlHeadED
+ * BulkHeadED
+ * BulkCurrentED
+ * DoneHead
+ * FmInterval
+ * FmRemaining
+ * FmNumber
+ * PeriodicStart
+ * LSThreshold
+ * RhDescriptorA
+ * RhDescriptorB
+ * RhStatus
+ * RhPortStatus
+ * USBStatus
+ * USBReset
+ * USTAR
+ * USWER
+ * USRFR
+ * USNFR
+ * USTCSR
+ * USSR
+ *
+ */
+
+#define _USB( x ) _SA1101( ( x ) + __USB_CONTROL )
+
+
+#define _Revision _USB( 0x0000 )
+#define _Control _USB( 0x0888 )
+#define _CommandStatus _USB( 0x0c00 )
+#define _InterruptStatus _USB( 0x1000 )
+#define _InterruptEnable _USB( 0x1400 )
+#define _HCCA _USB( 0x1800 )
+#define _PeriodCurrentED _USB( 0x1c00 )
+#define _ControlHeadED _USB( 0x2000 )
+#define _BulkHeadED _USB( 0x2800 )
+#define _BulkCurrentED _USB( 0x2c00 )
+#define _DoneHead _USB( 0x3000 )
+#define _FmInterval _USB( 0x3400 )
+#define _FmRemaining _USB( 0x3800 )
+#define _FmNumber _USB( 0x3c00 )
+#define _PeriodicStart _USB( 0x4000 )
+#define _LSThreshold _USB( 0x4400 )
+#define _RhDescriptorA _USB( 0x4800 )
+#define _RhDescriptorB _USB( 0x4c00 )
+#define _RhStatus _USB( 0x5000 )
+#define _RhPortStatus _USB( 0x5400 )
+#define _USBStatus _USB( 0x11800 )
+#define _USBReset _USB( 0x11c00 )
+
+#define _USTAR _USB( 0x10400 )
+#define _USWER _USB( 0x10800 )
+#define _USRFR _USB( 0x10c00 )
+#define _USNFR _USB( 0x11000 )
+#define _USTCSR _USB( 0x11400 )
+#define _USSR _USB( 0x11800 )
+
+
+#if (LANGUAGE == C)
+
+#define Revision (*((volatile Word *) SA1101_p2v (_Revision)))
+#define Control (*((volatile Word *) SA1101_p2v (_Control)))
+#define CommandStatus (*((volatile Word *) SA1101_p2v (_CommandStatus)))
+#define InterruptStatus (*((volatile Word *) SA1101_p2v (_InterruptStatus)))
+#define InterruptEnable (*((volatile Word *) SA1101_p2v (_InterruptEnable)))
+#define HCCA (*((volatile Word *) SA1101_p2v (_HCCA)))
+#define PeriodCurrentED (*((volatile Word *) SA1101_p2v (_PeriodCurrentED)))
+#define ControlHeadED (*((volatile Word *) SA1101_p2v (_ControlHeadED)))
+#define BulkHeadED (*((volatile Word *) SA1101_p2v (_BulkHeadED)))
+#define BulkCurrentED (*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
+#define DoneHead (*((volatile Word *) SA1101_p2v (_DoneHead)))
+#define FmInterval (*((volatile Word *) SA1101_p2v (_FmInterval)))
+#define FmRemaining (*((volatile Word *) SA1101_p2v (_FmRemaining)))
+#define FmNumber (*((volatile Word *) SA1101_p2v (_FmNumber)))
+#define PeriodicStart (*((volatile Word *) SA1101_p2v (_PeriodicStart)))
+#define LSThreshold (*((volatile Word *) SA1101_p2v (_LSThreshold)))
+#define RhDescriptorA (*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
+#define RhDescriptorB (*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
+#define RhStatus (*((volatile Word *) SA1101_p2v (_RhStatus)))
+#define RhPortStatus (*((volatile Word *) SA1101_p2v (_RhPortStatus)))
+#define USBStatus (*((volatile Word *) SA1101_p2v (_USBStatus)))
+#define USBReset (*((volatile Word *) SA1101_p2v (_USBReset)))
+#define USTAR (*((volatile Word *) SA1101_p2v (_USTAR)))
+#define USWER (*((volatile Word *) SA1101_p2v (_USWER)))
+#define USRFR (*((volatile Word *) SA1101_p2v (_USRFR)))
+#define USNFR (*((volatile Word *) SA1101_p2v (_USNFR)))
+#define USTCSR (*((volatile Word *) SA1101_p2v (_USTCSR)))
+#define USSR (*((volatile Word *) SA1101_p2v (_USSR)))
+
+
+#define USBStatus_IrqHciRmtWkp (1<<7)
+#define USBStatus_IrqHciBuffAcc (1<<8)
+#define USBStatus_nIrqHciM (1<<9)
+#define USBStatus_nHciMFClr (1<<10)
+
+#define USBReset_ForceIfReset 0x01
+#define USBReset_ForceHcReset 0x02
+#define USBReset_ClkGenReset 0x04
+
+#define USTCR_RdBstCntrl Fld(3,0)
+#define USTCR_ByteEnable Fld(4,3)
+#define USTCR_WriteEn (1<<7)
+#define USTCR_FifoCir (1<<8)
+#define USTCR_TestXferSel (1<<9)
+#define USTCR_FifoCirAtEnd (1<<10)
+#define USTCR_nSimScaleDownClk (1<<11)
+
+#define USSR_nAppMDEmpty 0x01
+#define USSR_nAppMDFirst 0x02
+#define USSR_nAppMDLast 0x04
+#define USSR_nAppMDFull 0x08
+#define USSR_nAppMAFull 0x10
+#define USSR_XferReq 0x20
+#define USSR_XferEnd 0x40
+
+#endif /* LANGUAGE == C */
+
+
+/*
+ * Interrupt Controller
+ *
+ * Registers
+ * INTTEST0 Test register 0
+ * INTTEST1 Test register 1
+ * INTENABLE0 Interrupt Enable register 0
+ * INTENABLE1 Interrupt Enable register 1
+ * INTPOL0 Interrupt Polarity selection 0
+ * INTPOL1 Interrupt Polarity selection 1
+ * INTTSTSEL Interrupt source selection
+ * INTSTATCLR0 Interrupt Status 0
+ * INTSTATCLR1 Interrupt Status 1
+ * INTSET0 Interrupt Set 0
+ * INTSET1 Interrupt Set 1
+ */
+
+#define _INT( x ) _SA1101( ( x ) + __INTERRUPT_CONTROL)
+
+#define _INTTEST0 _INT( 0x1000 )
+#define _INTTEST1 _INT( 0x1400 )
+#define _INTENABLE0 _INT( 0x2000 )
+#define _INTENABLE1 _INT( 0x2400 )
+#define _INTPOL0 _INT( 0x3000 )
+#define _INTPOL1 _INT( 0x3400 )
+#define _INTTSTSEL _INT( 0x5000 )
+#define _INTSTATCLR0 _INT( 0x6000 )
+#define _INTSTATCLR1 _INT( 0x6400 )
+#define _INTSET0 _INT( 0x7000 )
+#define _INTSET1 _INT( 0x7400 )
+
+#if ( LANGUAGE == C )
+#define INTTEST0 (*((volatile Word *) SA1101_p2v (_INTTEST0)))
+#define INTTEST1 (*((volatile Word *) SA1101_p2v (_INTTEST1)))
+#define INTENABLE0 (*((volatile Word *) SA1101_p2v (_INTENABLE0)))
+#define INTENABLE1 (*((volatile Word *) SA1101_p2v (_INTENABLE1)))
+#define INTPOL0 (*((volatile Word *) SA1101_p2v (_INTPOL0)))
+#define INTPOL1 (*((volatile Word *) SA1101_p2v (_INTPOL1)))
+#define INTTSTSEL (*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
+#define INTSTATCLR0 (*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
+#define INTSTATCLR1 (*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
+#define INTSET0 (*((volatile Word *) SA1101_p2v (_INTSET0)))
+#define INTSET1 (*((volatile Word *) SA1101_p2v (_INTSET1)))
+
+#endif /* LANGUAGE == C */
+
+/*
+ * PS/2 Trackpad and Mouse Interfaces
+ *
+ * Registers (prefix kbd applies to trackpad interface, mse to mouse)
+ * KBDCR Control Register
+ * KBDSTAT Status Register
+ * KBDDATA Transmit/Receive Data register
+ * KBDCLKDIV Clock Division Register
+ * KBDPRECNT Clock Precount Register
+ * KBDTEST1 Test register 1
+ * KBDTEST2 Test register 2
+ * KBDTEST3 Test register 3
+ * KBDTEST4 Test register 4
+ * MSECR
+ * MSESTAT
+ * MSEDATA
+ * MSECLKDIV
+ * MSEPRECNT
+ * MSETEST1
+ * MSETEST2
+ * MSETEST3
+ * MSETEST4
+ *
+ */
+
+#define _KBD( x ) _SA1101( ( x ) + __TRACK_INTERFACE )
+#define _MSE( x ) _SA1101( ( x ) + __MOUSE_INTERFACE )
+
+#define _KBDCR _KBD( 0x0000 )
+#define _KBDSTAT _KBD( 0x0400 )
+#define _KBDDATA _KBD( 0x0800 )
+#define _KBDCLKDIV _KBD( 0x0c00 )
+#define _KBDPRECNT _KBD( 0x1000 )
+#define _KBDTEST1 _KBD( 0x2000 )
+#define _KBDTEST2 _KBD( 0x2400 )
+#define _KBDTEST3 _KBD( 0x2800 )
+#define _KBDTEST4 _KBD( 0x2c00 )
+#define _MSECR _MSE( 0x0000 )
+#define _MSESTAT _MSE( 0x0400 )
+#define _MSEDATA _MSE( 0x0800 )
+#define _MSECLKDIV _MSE( 0x0c00 )
+#define _MSEPRECNT _MSE( 0x1000 )
+#define _MSETEST1 _MSE( 0x2000 )
+#define _MSETEST2 _MSE( 0x2400 )
+#define _MSETEST3 _MSE( 0x2800 )
+#define _MSETEST4 _MSE( 0x2c00 )
+
+#if ( LANGUAGE == C )
+
+#define KBDCR (*((volatile Word *) SA1101_p2v (_KBDCR)))
+#define KBDSTAT (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
+#define KBDDATA (*((volatile Word *) SA1101_p2v (_KBDDATA)))
+#define KBDCLKDIV (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
+#define KBDPRECNT (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
+#define KBDTEST1 (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
+#define KBDTEST2 (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
+#define KBDTEST3 (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
+#define KBDTEST4 (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
+#define MSECR (*((volatile Word *) SA1101_p2v (_MSECR)))
+#define MSESTAT (*((volatile Word *) SA1101_p2v (_MSESTAT)))
+#define MSEDATA (*((volatile Word *) SA1101_p2v (_MSEDATA)))
+#define MSECLKDIV (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
+#define MSEPRECNT (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
+#define MSETEST1 (*((volatile Word *) SA1101_p2v (_MSETEST1)))
+#define MSETEST2 (*((volatile Word *) SA1101_p2v (_MSETEST2)))
+#define MSETEST3 (*((volatile Word *) SA1101_p2v (_MSETEST3)))
+#define MSETEST4 (*((volatile Word *) SA1101_p2v (_MSETEST4)))
+
+
+#define KBDCR_ENA 0x08
+#define KBDCR_FKD 0x02
+#define KBDCR_FKC 0x01
+
+#define KBDSTAT_TXE 0x80
+#define KBDSTAT_TXB 0x40
+#define KBDSTAT_RXF 0x20
+#define KBDSTAT_RXB 0x10
+#define KBDSTAT_ENA 0x08
+#define KBDSTAT_RXP 0x04
+#define KBDSTAT_KBD 0x02
+#define KBDSTAT_KBC 0x01
+
+#define KBDCLKDIV_DivVal Fld(4,0)
+
+#define MSECR_ENA 0x08
+#define MSECR_FKD 0x02
+#define MSECR_FKC 0x01
+
+#define MSESTAT_TXE 0x80
+#define MSESTAT_TXB 0x40
+#define MSESTAT_RXF 0x20
+#define MSESTAT_RXB 0x10
+#define MSESTAT_ENA 0x08
+#define MSESTAT_RXP 0x04
+#define MSESTAT_MSD 0x02
+#define MSESTAT_MSC 0x01
+
+#define MSECLKDIV_DivVal Fld(4,0)
+
+#define KBDTEST1_CD 0x80
+#define KBDTEST1_RC1 0x40
+#define KBDTEST1_MC 0x20
+#define KBDTEST1_C Fld(2,3)
+#define KBDTEST1_T2 0x40
+#define KBDTEST1_T1 0x20
+#define KBDTEST1_T0 0x10
+#define KBDTEST2_TICBnRES 0x08
+#define KBDTEST2_RKC 0x04
+#define KBDTEST2_RKD 0x02
+#define KBDTEST2_SEL 0x01
+#define KBDTEST3_ms_16 0x80
+#define KBDTEST3_us_64 0x40
+#define KBDTEST3_us_16 0x20
+#define KBDTEST3_DIV8 0x10
+#define KBDTEST3_DIn 0x08
+#define KBDTEST3_CIn 0x04
+#define KBDTEST3_KD 0x02
+#define KBDTEST3_KC 0x01
+#define KBDTEST4_BC12 0x80
+#define KBDTEST4_BC11 0x40
+#define KBDTEST4_TRES 0x20
+#define KBDTEST4_CLKOE 0x10
+#define KBDTEST4_CRES 0x08
+#define KBDTEST4_RXB 0x04
+#define KBDTEST4_TXB 0x02
+#define KBDTEST4_SRX 0x01
+
+#define MSETEST1_CD 0x80
+#define MSETEST1_RC1 0x40
+#define MSETEST1_MC 0x20
+#define MSETEST1_C Fld(2,3)
+#define MSETEST1_T2 0x40
+#define MSETEST1_T1 0x20
+#define MSETEST1_T0 0x10
+#define MSETEST2_TICBnRES 0x08
+#define MSETEST2_RKC 0x04
+#define MSETEST2_RKD 0x02
+#define MSETEST2_SEL 0x01
+#define MSETEST3_ms_16 0x80
+#define MSETEST3_us_64 0x40
+#define MSETEST3_us_16 0x20
+#define MSETEST3_DIV8 0x10
+#define MSETEST3_DIn 0x08
+#define MSETEST3_CIn 0x04
+#define MSETEST3_KD 0x02
+#define MSETEST3_KC 0x01
+#define MSETEST4_BC12 0x80
+#define MSETEST4_BC11 0x40
+#define MSETEST4_TRES 0x20
+#define MSETEST4_CLKOE 0x10
+#define MSETEST4_CRES 0x08
+#define MSETEST4_RXB 0x04
+#define MSETEST4_TXB 0x02
+#define MSETEST4_SRX 0x01
+
+#endif /* LANGUAGE == C */
+
+
+/*
+ * General-Purpose I/O Interface
+ *
+ * Registers
+ * PADWR Port A Data Write Register
+ * PBDWR Port B Data Write Register
+ * PADRR Port A Data Read Register
+ * PBDRR Port B Data Read Register
+ * PADDR Port A Data Direction Register
+ * PBDDR Port B Data Direction Register
+ * PASSR Port A Sleep State Register
+ * PBSSR Port B Sleep State Register
+ *
+ */
+
+#define _PIO( x ) _SA1101( ( x ) + __GPIO_INTERFACE )
+
+#define _PADWR _PIO( 0x0000 )
+#define _PBDWR _PIO( 0x0400 )
+#define _PADRR _PIO( 0x0000 )
+#define _PBDRR _PIO( 0x0400 )
+#define _PADDR _PIO( 0x0800 )
+#define _PBDDR _PIO( 0x0c00 )
+#define _PASSR _PIO( 0x1000 )
+#define _PBSSR _PIO( 0x1400 )
+
+
+#if ( LANGUAGE == C )
+
+
+#define PADWR (*((volatile Word *) SA1101_p2v (_PADWR)))
+#define PBDWR (*((volatile Word *) SA1101_p2v (_PBDWR)))
+#define PADRR (*((volatile Word *) SA1101_p2v (_PADRR)))
+#define PBDRR (*((volatile Word *) SA1101_p2v (_PBDRR)))
+#define PADDR (*((volatile Word *) SA1101_p2v (_PADDR)))
+#define PBDDR (*((volatile Word *) SA1101_p2v (_PBDDR)))
+#define PASSR (*((volatile Word *) SA1101_p2v (_PASSR)))
+#define PBSSR (*((volatile Word *) SA1101_p2v (_PBSSR)))
+
+#endif
+
+
+
+/*
+ * Keypad Interface
+ *
+ * Registers
+ * PXDWR
+ * PXDRR
+ * PYDWR
+ * PYDRR
+ *
+ */
+
+#define _KEYPAD( x ) _SA1101( ( x ) + __KEYPAD_INTERFACE )
+
+#define _PXDWR _KEYPAD( 0x0000 )
+#define _PXDRR _KEYPAD( 0x0000 )
+#define _PYDWR _KEYPAD( 0x0400 )
+#define _PYDRR _KEYPAD( 0x0400 )
+
+#if ( LANGUAGE == C )
+
+
+#define PXDWR (*((volatile Word *) SA1101_p2v (_PXDWR)))
+#define PXDRR (*((volatile Word *) SA1101_p2v (_PXDRR)))
+#define PYDWR (*((volatile Word *) SA1101_p2v (_PYDWR)))
+#define PYDRR (*((volatile Word *) SA1101_p2v (_PYDRR)))
+
+#endif
+
+
+
+/*
+ * PCMCIA Interface
+ *
+ * Registers
+ * PCSR Status Register
+ * PCCR Control Register
+ * PCSSR Sleep State Register
+ *
+ */
+
+#define _CARD( x ) _SA1101( ( x ) + __PCMCIA_INTERFACE )
+
+#define _PCSR _CARD( 0x0000 )
+#define _PCCR _CARD( 0x0400 )
+#define _PCSSR _CARD( 0x0800 )
+
+#if ( LANGUAGE == C )
+#define PCSR (*((volatile Word *) SA1101_p2v (_PCSR)))
+#define PCCR (*((volatile Word *) SA1101_p2v (_PCCR)))
+#define PCSSR (*((volatile Word *) SA1101_p2v (_PCSSR)))
+
+#define PCSR_S0_ready 0x0001
+#define PCSR_S1_ready 0x0002
+#define PCSR_S0_detected 0x0004
+#define PCSR_S1_detected 0x0008
+#define PCSR_S0_VS1 0x0010
+#define PCSR_S0_VS2 0x0020
+#define PCSR_S1_VS1 0x0040
+#define PCSR_S1_VS2 0x0080
+#define PCSR_S0_WP 0x0100
+#define PCSR_S1_WP 0x0200
+#define PCSR_S0_BVD1_nSTSCHG 0x0400
+#define PCSR_S0_BVD2_nSPKR 0x0800
+#define PCSR_S1_BVD1_nSTSCHG 0x1000
+#define PCSR_S1_BVD2_nSPKR 0x2000
+
+#define PCCR_S0_VPP0 0x0001
+#define PCCR_S0_VPP1 0x0002
+#define PCCR_S0_VCC0 0x0004
+#define PCCR_S0_VCC1 0x0008
+#define PCCR_S1_VPP0 0x0010
+#define PCCR_S1_VPP1 0x0020
+#define PCCR_S1_VCC0 0x0040
+#define PCCR_S1_VCC1 0x0080
+#define PCCR_S0_reset 0x0100
+#define PCCR_S1_reset 0x0200
+#define PCCR_S0_float 0x0400
+#define PCCR_S1_float 0x0800
+
+#define PCSSR_S0_VCC0 0x0001
+#define PCSSR_S0_VCC1 0x0002
+#define PCSSR_S0_VPP0 0x0004
+#define PCSSR_S0_VPP1 0x0008
+#define PCSSR_S0_control 0x0010
+#define PCSSR_S1_VCC0 0x0020
+#define PCSSR_S1_VCC1 0x0040
+#define PCSSR_S1_VPP0 0x0080
+#define PCSSR_S1_VPP1 0x0100
+#define PCSSR_S1_control 0x0200
+
+#endif
+
+#undef C
+#undef Assembly
diff --git a/arch/arm/mach-sa1100/include/mach/assabet.h b/arch/arm/mach-sa1100/include/mach/assabet.h
new file mode 100644
index 000000000..c23fcdb04
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/assabet.h
@@ -0,0 +1,104 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/assabet.h
+ *
+ * Created 2000/06/05 by Nicolas Pitre <nico@fluxnic.net>
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ * Definitions for Neponset added.
+ */
+#ifndef __ASM_ARCH_ASSABET_H
+#define __ASM_ARCH_ASSABET_H
+
+
+/* System Configuration Register flags */
+
+#define ASSABET_SCR_SDRAM_LOW (1<<2) /* SDRAM size (low bit) */
+#define ASSABET_SCR_SDRAM_HIGH (1<<3) /* SDRAM size (high bit) */
+#define ASSABET_SCR_FLASH_LOW (1<<4) /* Flash size (low bit) */
+#define ASSABET_SCR_FLASH_HIGH (1<<5) /* Flash size (high bit) */
+#define ASSABET_SCR_GFX (1<<8) /* Graphics Accelerator (0 = present) */
+#define ASSABET_SCR_SA1111 (1<<9) /* Neponset (0 = present) */
+
+#define ASSABET_SCR_INIT -1
+
+extern unsigned long SCR_value;
+
+#ifdef CONFIG_ASSABET_NEPONSET
+#define machine_has_neponset() ((SCR_value & ASSABET_SCR_SA1111) == 0)
+#else
+#define machine_has_neponset() (0)
+#endif
+
+/* Board Control Register */
+
+#define ASSABET_BCR_BASE 0xf1000000
+#define ASSABET_BCR (*(volatile unsigned int *)(ASSABET_BCR_BASE))
+
+#define ASSABET_BCR_CF_PWR (1<<0) /* Compact Flash Power (1 = 3.3v, 0 = off) */
+#define ASSABET_BCR_CF_RST (1<<1) /* Compact Flash Reset (1 = power up reset) */
+#define ASSABET_BCR_NGFX_RST (1<<1) /* Graphics Accelerator Reset (0 = hold reset) */
+#define ASSABET_BCR_NCODEC_RST (1<<2) /* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */
+#define ASSABET_BCR_IRDA_FSEL (1<<3) /* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */
+#define ASSABET_BCR_IRDA_MD0 (1<<4) /* Range/Power select */
+#define ASSABET_BCR_IRDA_MD1 (1<<5) /* Range/Power select */
+#define ASSABET_BCR_STEREO_LB (1<<6) /* Stereo Loopback */
+#define ASSABET_BCR_CF_BUS_OFF (1<<7) /* Compact Flash bus (0 = on, 1 = off (float)) */
+#define ASSABET_BCR_AUDIO_ON (1<<8) /* Audio power on */
+#define ASSABET_BCR_LIGHT_ON (1<<9) /* Backlight */
+#define ASSABET_BCR_LCD_12RGB (1<<10) /* 0 = 16RGB, 1 = 12RGB */
+#define ASSABET_BCR_LCD_ON (1<<11) /* LCD power on */
+#define ASSABET_BCR_RS232EN (1<<12) /* RS232 transceiver enable */
+#define ASSABET_BCR_LED_RED (1<<13) /* D9 (0 = on, 1 = off) */
+#define ASSABET_BCR_LED_GREEN (1<<14) /* D8 (0 = on, 1 = off) */
+#define ASSABET_BCR_VIB_ON (1<<15) /* Vibration motor (quiet alert) */
+#define ASSABET_BCR_COM_DTR (1<<16) /* COMport Data Terminal Ready */
+#define ASSABET_BCR_COM_RTS (1<<17) /* COMport Request To Send */
+#define ASSABET_BCR_RAD_WU (1<<18) /* Radio wake up interrupt */
+#define ASSABET_BCR_SMB_EN (1<<19) /* System management bus enable */
+#define ASSABET_BCR_TV_IR_DEC (1<<20) /* TV IR Decode Enable (not implemented) */
+#define ASSABET_BCR_QMUTE (1<<21) /* Quick Mute */
+#define ASSABET_BCR_RAD_ON (1<<22) /* Radio Power On */
+#define ASSABET_BCR_SPK_OFF (1<<23) /* 1 = Speaker amplifier power off */
+
+#ifdef CONFIG_SA1100_ASSABET
+extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set);
+#else
+#define ASSABET_BCR_frob(x,y) do { } while (0)
+#endif
+
+extern void assabet_uda1341_reset(int set);
+
+#define ASSABET_BCR_set(x) ASSABET_BCR_frob((x), (x))
+#define ASSABET_BCR_clear(x) ASSABET_BCR_frob((x), 0)
+
+#define ASSABET_BSR_BASE 0xf1000000
+#define ASSABET_BSR (*(volatile unsigned int*)(ASSABET_BSR_BASE))
+
+#define ASSABET_BSR_RS232_VALID (1 << 24)
+#define ASSABET_BSR_COM_DCD (1 << 25)
+#define ASSABET_BSR_COM_CTS (1 << 26)
+#define ASSABET_BSR_COM_DSR (1 << 27)
+#define ASSABET_BSR_RAD_CTS (1 << 28)
+#define ASSABET_BSR_RAD_DSR (1 << 29)
+#define ASSABET_BSR_RAD_DCD (1 << 30)
+#define ASSABET_BSR_RAD_RI (1 << 31)
+
+
+/* GPIOs (bitmasks) for which the generic definition doesn't say much */
+#define ASSABET_GPIO_RADIO_IRQ GPIO_GPIO (14) /* Radio interrupt request */
+#define ASSABET_GPIO_PS_MODE_SYNC GPIO_GPIO (16) /* Power supply mode/sync */
+#define ASSABET_GPIO_STEREO_64FS_CLK GPIO_GPIO (19) /* SSP UDA1341 clock input */
+#define ASSABET_GPIO_GFX_IRQ GPIO_GPIO (24) /* Graphics IRQ */
+#define ASSABET_GPIO_BATT_LOW GPIO_GPIO (26) /* Low battery */
+#define ASSABET_GPIO_RCLK GPIO_GPIO (26) /* CCLK/2 */
+
+/* These are gpiolib GPIO numbers, not bitmasks */
+#define ASSABET_GPIO_CF_IRQ 21 /* CF IRQ */
+#define ASSABET_GPIO_CF_CD 22 /* CF CD */
+#define ASSABET_GPIO_CF_BVD2 24 /* CF BVD / IOSPKR */
+#define ASSABET_GPIO_CF_BVD1 25 /* CF BVD / IOSTSCHG */
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/badge4.h b/arch/arm/mach-sa1100/include/mach/badge4.h
new file mode 100644
index 000000000..44d2e1bfc
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/badge4.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/badge4.h
+ *
+ * Tim Connors <connors@hpl.hp.com>
+ * Christopher Hoover <ch@hpl.hp.com>
+ *
+ * Copyright (C) 2002 Hewlett-Packard Company
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error "include <mach/hardware.h> instead"
+#endif
+
+#define BADGE4_SA1111_BASE (0x48000000)
+
+/* GPIOs on the BadgePAD 4 */
+#define BADGE4_GPIO_INT_1111 GPIO_GPIO0 /* SA-1111 IRQ */
+
+#define BADGE4_GPIO_INT_VID GPIO_GPIO1 /* Video expansion */
+#define BADGE4_GPIO_LGP2 GPIO_GPIO2 /* GPIO_LDD8 */
+#define BADGE4_GPIO_LGP3 GPIO_GPIO3 /* GPIO_LDD9 */
+#define BADGE4_GPIO_LGP4 GPIO_GPIO4 /* GPIO_LDD10 */
+#define BADGE4_GPIO_LGP5 GPIO_GPIO5 /* GPIO_LDD11 */
+#define BADGE4_GPIO_LGP6 GPIO_GPIO6 /* GPIO_LDD12 */
+#define BADGE4_GPIO_LGP7 GPIO_GPIO7 /* GPIO_LDD13 */
+#define BADGE4_GPIO_LGP8 GPIO_GPIO8 /* GPIO_LDD14 */
+#define BADGE4_GPIO_LGP9 GPIO_GPIO9 /* GPIO_LDD15 */
+#define BADGE4_GPIO_GPA_VID GPIO_GPIO10 /* Video expansion */
+#define BADGE4_GPIO_GPB_VID GPIO_GPIO11 /* Video expansion */
+#define BADGE4_GPIO_GPC_VID GPIO_GPIO12 /* Video expansion */
+
+#define BADGE4_GPIO_UART_HS1 GPIO_GPIO13
+#define BADGE4_GPIO_UART_HS2 GPIO_GPIO14
+
+#define BADGE4_GPIO_MUXSEL0 GPIO_GPIO15
+#define BADGE4_GPIO_TESTPT_J7 GPIO_GPIO16
+
+#define BADGE4_GPIO_SDSDA GPIO_GPIO17 /* SDRAM SPD Data */
+#define BADGE4_GPIO_SDSCL GPIO_GPIO18 /* SDRAM SPD Clock */
+#define BADGE4_GPIO_SDTYP0 GPIO_GPIO19 /* SDRAM Type Control */
+#define BADGE4_GPIO_SDTYP1 GPIO_GPIO20 /* SDRAM Type Control */
+
+#define BADGE4_GPIO_BGNT_1111 GPIO_GPIO21 /* GPIO_MBGNT */
+#define BADGE4_GPIO_BREQ_1111 GPIO_GPIO22 /* GPIO_TREQA */
+
+#define BADGE4_GPIO_TESTPT_J6 GPIO_GPIO23
+
+#define BADGE4_GPIO_PCMEN5V GPIO_GPIO24 /* 5V power */
+
+#define BADGE4_GPIO_SA1111_NRST GPIO_GPIO25 /* SA-1111 nRESET */
+
+#define BADGE4_GPIO_TESTPT_J5 GPIO_GPIO26
+
+#define BADGE4_GPIO_CLK_1111 GPIO_GPIO27 /* GPIO_32_768kHz */
+
+/* Interrupts on the BadgePAD 4 */
+#define BADGE4_IRQ_GPIO_SA1111 IRQ_GPIO0 /* SA-1111 interrupt */
+
+
+/* PCM5ENV Usage tracking */
+
+#define BADGE4_5V_PCMCIA_SOCK0 (1<<0)
+#define BADGE4_5V_PCMCIA_SOCK1 (1<<1)
+#define BADGE4_5V_PCMCIA_SOCK(n) (1<<(n))
+#define BADGE4_5V_USB (1<<2)
+#define BADGE4_5V_INITIALLY (1<<3)
+
+#ifndef __ASSEMBLY__
+extern void badge4_set_5V(unsigned subsystem, int on);
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/bitfield.h b/arch/arm/mach-sa1100/include/mach/bitfield.h
new file mode 100644
index 000000000..f1f0e3387
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/bitfield.h
@@ -0,0 +1,113 @@
+/*
+ * FILE bitfield.h
+ *
+ * Version 1.1
+ * Author Copyright (c) Marc A. Viredaz, 1998
+ * DEC Western Research Laboratory, Palo Alto, CA
+ * Date April 1998 (April 1997)
+ * System Advanced RISC Machine (ARM)
+ * Language C or ARM Assembly
+ * Purpose Definition of macros to operate on bit fields.
+ */
+
+
+
+#ifndef __BITFIELD_H
+#define __BITFIELD_H
+
+#ifndef __ASSEMBLY__
+#define UData(Data) ((unsigned long) (Data))
+#else
+#define UData(Data) (Data)
+#endif
+
+
+/*
+ * MACRO: Fld
+ *
+ * Purpose
+ * The macro "Fld" encodes a bit field, given its size and its shift value
+ * with respect to bit 0.
+ *
+ * Note
+ * A more intuitive way to encode bit fields would have been to use their
+ * mask. However, extracting size and shift value information from a bit
+ * field's mask is cumbersome and might break the assembler (255-character
+ * line-size limit).
+ *
+ * Input
+ * Size Size of the bit field, in number of bits.
+ * Shft Shift value of the bit field with respect to bit 0.
+ *
+ * Output
+ * Fld Encoded bit field.
+ */
+
+#define Fld(Size, Shft) (((Size) << 16) + (Shft))
+
+
+/*
+ * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
+ *
+ * Purpose
+ * The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
+ * the size, shift value, mask, aligned mask, and first bit of a
+ * bit field.
+ *
+ * Input
+ * Field Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ * FSize Size of the bit field, in number of bits.
+ * FShft Shift value of the bit field with respect to bit 0.
+ * FMsk Mask for the bit field.
+ * FAlnMsk Mask for the bit field, aligned on bit 0.
+ * F1stBit First bit of the bit field.
+ */
+
+#define FSize(Field) ((Field) >> 16)
+#define FShft(Field) ((Field) & 0x0000FFFF)
+#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field) (UData (1) << FShft (Field))
+
+
+/*
+ * MACRO: FInsrt
+ *
+ * Purpose
+ * The macro "FInsrt" inserts a value into a bit field by shifting the
+ * former appropriately.
+ *
+ * Input
+ * Value Bit-field value.
+ * Field Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ * FInsrt Bit-field value positioned appropriately.
+ */
+
+#define FInsrt(Value, Field) \
+ (UData (Value) << FShft (Field))
+
+
+/*
+ * MACRO: FExtr
+ *
+ * Purpose
+ * The macro "FExtr" extracts the value of a bit field by masking and
+ * shifting it appropriately.
+ *
+ * Input
+ * Data Data containing the bit-field to be extracted.
+ * Field Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ * FExtr Bit-field value.
+ */
+
+#define FExtr(Data, Field) \
+ ((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
+
+
+#endif /* __BITFIELD_H */
diff --git a/arch/arm/mach-sa1100/include/mach/cerf.h b/arch/arm/mach-sa1100/include/mach/cerf.h
new file mode 100644
index 000000000..88fd9c006
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/cerf.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/cerf.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Apr-2003 : Removed some old PDA crud [FB]
+ */
+#ifndef _INCLUDE_CERF_H_
+#define _INCLUDE_CERF_H_
+
+
+#define CERF_ETH_IO 0xf0000000
+#define CERF_ETH_IRQ IRQ_GPIO26
+
+#define CERF_GPIO_CF_BVD2 19
+#define CERF_GPIO_CF_BVD1 20
+#define CERF_GPIO_CF_RESET 21
+#define CERF_GPIO_CF_IRQ 22
+#define CERF_GPIO_CF_CD 23
+
+#endif // _INCLUDE_CERF_H_
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
new file mode 100644
index 000000000..b478ca180
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -0,0 +1,95 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/collie.h
+ *
+ * This file contains the hardware specific definitions for Collie
+ * Only include this file from SA1100-specific files.
+ *
+ * ChangeLog:
+ * 04-06-2001 Lineo Japan, Inc.
+ * 04-16-2001 SHARP Corporation
+ * 07-07-2002 Chris Larson <clarson@digi.com>
+ *
+ */
+#ifndef __ASM_ARCH_COLLIE_H
+#define __ASM_ARCH_COLLIE_H
+
+#include "hardware.h" /* Gives GPIO_MAX */
+
+extern void locomolcd_power(int on);
+
+#define COLLIE_SCOOP_GPIO_BASE (GPIO_MAX + 1)
+#define COLLIE_GPIO_CHARGE_ON (COLLIE_SCOOP_GPIO_BASE + 0)
+#define COLLIE_SCP_DIAG_BOOT1 SCOOP_GPCR_PA12
+#define COLLIE_SCP_DIAG_BOOT2 SCOOP_GPCR_PA13
+#define COLLIE_SCP_MUTE_L SCOOP_GPCR_PA14
+#define COLLIE_SCP_MUTE_R SCOOP_GPCR_PA15
+#define COLLIE_SCP_5VON SCOOP_GPCR_PA16
+#define COLLIE_SCP_AMP_ON SCOOP_GPCR_PA17
+#define COLLIE_GPIO_VPEN (COLLIE_SCOOP_GPIO_BASE + 7)
+#define COLLIE_SCP_LB_VOL_CHG SCOOP_GPCR_PA19
+
+#define COLLIE_SCOOP_IO_DIR (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+ COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
+ COLLIE_SCP_LB_VOL_CHG)
+#define COLLIE_SCOOP_IO_OUT (COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R)
+
+/* GPIOs for gpiolib */
+
+#define COLLIE_GPIO_ON_KEY (0)
+#define COLLIE_GPIO_AC_IN (1)
+#define COLLIE_GPIO_SDIO_INT (11)
+#define COLLIE_GPIO_CF_IRQ (14)
+#define COLLIE_GPIO_nREMOCON_INT (15)
+#define COLLIE_GPIO_UCB1x00_RESET (16)
+#define COLLIE_GPIO_nMIC_ON (17)
+#define COLLIE_GPIO_nREMOCON_ON (18)
+#define COLLIE_GPIO_CO (20)
+#define COLLIE_GPIO_MCP_CLK (21)
+#define COLLIE_GPIO_CF_CD (22)
+#define COLLIE_GPIO_UCB1x00_IRQ (23)
+#define COLLIE_GPIO_WAKEUP (24)
+#define COLLIE_GPIO_GA_INT (25)
+#define COLLIE_GPIO_MAIN_BAT_LOW (26)
+
+/* GPIO definitions for direct register access */
+
+#define _COLLIE_GPIO_ON_KEY GPIO_GPIO(0)
+#define _COLLIE_GPIO_AC_IN GPIO_GPIO(1)
+#define _COLLIE_GPIO_nREMOCON_INT GPIO_GPIO(15)
+#define _COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO(16)
+#define _COLLIE_GPIO_nMIC_ON GPIO_GPIO(17)
+#define _COLLIE_GPIO_nREMOCON_ON GPIO_GPIO(18)
+#define _COLLIE_GPIO_CO GPIO_GPIO(20)
+#define _COLLIE_GPIO_WAKEUP GPIO_GPIO(24)
+/* Interrupts */
+
+#define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0
+#define COLLIE_IRQ_GPIO_AC_IN IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_SDIO_IRQ IRQ_GPIO11
+#define COLLIE_IRQ_GPIO_CF_IRQ IRQ_GPIO14
+#define COLLIE_IRQ_GPIO_nREMOCON_INT IRQ_GPIO15
+#define COLLIE_IRQ_GPIO_CO IRQ_GPIO20
+#define COLLIE_IRQ_GPIO_CF_CD IRQ_GPIO22
+#define COLLIE_IRQ_GPIO_UCB1x00_IRQ IRQ_GPIO23
+#define COLLIE_IRQ_GPIO_WAKEUP IRQ_GPIO24
+#define COLLIE_IRQ_GPIO_GA_INT IRQ_GPIO25
+#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO26
+
+/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
+#define COLLIE_TC35143_GPIO_BASE (GPIO_MAX + 13)
+#define COLLIE_TC35143_GPIO_VERSION0 UCB_IO_0
+#define COLLIE_TC35143_GPIO_TBL_CHK UCB_IO_1
+#define COLLIE_TC35143_GPIO_VPEN_ON UCB_IO_2
+#define COLLIE_GPIO_IR_ON (COLLIE_TC35143_GPIO_BASE + 3)
+#define COLLIE_TC35143_GPIO_AMP_ON UCB_IO_4
+#define COLLIE_TC35143_GPIO_VERSION1 UCB_IO_5
+#define COLLIE_TC35143_GPIO_FS8KLPF UCB_IO_5
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6
+#define COLLIE_GPIO_MBAT_ON (COLLIE_TC35143_GPIO_BASE + 7)
+#define COLLIE_GPIO_BBAT_ON (COLLIE_TC35143_GPIO_BASE + 8)
+#define COLLIE_GPIO_TMP_ON (COLLIE_TC35143_GPIO_BASE + 9)
+#define COLLIE_TC35143_GPIO_IN (UCB_IO_0 | UCB_IO_2 | UCB_IO_5)
+#define COLLIE_TC35143_GPIO_OUT (UCB_IO_1 | UCB_IO_3 | UCB_IO_4 \
+ | UCB_IO_6)
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/generic.h b/arch/arm/mach-sa1100/include/mach/generic.h
new file mode 100644
index 000000000..665542e0c
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/generic.h
@@ -0,0 +1 @@
+#include "../../generic.h"
diff --git a/arch/arm/mach-sa1100/include/mach/h3xxx.h b/arch/arm/mach-sa1100/include/mach/h3xxx.h
new file mode 100644
index 000000000..603d4343f
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/h3xxx.h
@@ -0,0 +1,85 @@
+/*
+ * Definitions for Compaq iPAQ H3100 and H3600 handheld computers
+ *
+ * (c) 2000 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_H3XXX_H_
+#define _INCLUDE_H3XXX_H_
+
+#include "hardware.h" /* Gives GPIO_MAX */
+
+/* Physical memory regions corresponding to chip selects */
+#define H3600_EGPIO_PHYS (SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS SA1100_CS4_PHYS
+
+/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
+#define H3600_EGPIO_VIRT 0xf0000000
+#define H3600_BANK_2_VIRT 0xf1000000
+#define H3600_BANK_4_VIRT 0xf3800000
+
+/*
+ * gpiolib numbers for all iPAQs
+ */
+#define H3XXX_GPIO_PWR_BUTTON 0
+#define H3XXX_GPIO_PCMCIA_CD1 10
+#define H3XXX_GPIO_PCMCIA_IRQ1 11
+#define H3XXX_GPIO_PCMCIA_CD0 17
+#define H3XXX_GPIO_ACTION_BUTTON 18
+#define H3XXX_GPIO_SYS_CLK 19
+#define H3XXX_GPIO_PCMCIA_IRQ0 21
+#define H3XXX_GPIO_COM_DCD 23
+#define H3XXX_GPIO_OPTION 24
+#define H3XXX_GPIO_COM_CTS 25
+#define H3XXX_GPIO_COM_RTS 26
+
+/* machine-specific gpios */
+
+#define H3100_GPIO_BT_ON 2
+#define H3100_GPIO_QMUTE 4
+#define H3100_GPIO_LCD_3V_ON 5
+#define H3100_GPIO_AUD_ON 6
+#define H3100_GPIO_AUD_PWR_ON 7
+#define H3100_GPIO_IR_ON 8
+#define H3100_GPIO_IR_FSEL 9
+
+#define H3600_GPIO_CLK_SET0 12 /* audio sample rate clock generator */
+#define H3600_GPIO_CLK_SET1 13
+#define H3600_GPIO_SOFT_RESET 20 /* also known as BATT_FAULT */
+#define H3600_GPIO_OPT_LOCK 22
+#define H3600_GPIO_OPT_DET 27
+
+
+/* H3100 / 3600 EGPIO pins */
+#define H3XXX_EGPIO_BASE (GPIO_MAX + 1)
+
+#define H3XXX_EGPIO_VPP_ON (H3XXX_EGPIO_BASE + 0)
+#define H3XXX_EGPIO_CARD_RESET (H3XXX_EGPIO_BASE + 1) /* reset the attached pcmcia/compactflash card. active high. */
+#define H3XXX_EGPIO_OPT_RESET (H3XXX_EGPIO_BASE + 2) /* reset the attached option pack. active high. */
+#define H3XXX_EGPIO_CODEC_NRESET (H3XXX_EGPIO_BASE + 3) /* reset the onboard UDA1341. active low. */
+#define H3XXX_EGPIO_OPT_NVRAM_ON (H3XXX_EGPIO_BASE + 4) /* apply power to optionpack nvram, active high. */
+#define H3XXX_EGPIO_OPT_ON (H3XXX_EGPIO_BASE + 5) /* full power to option pack. active high. */
+#define H3XXX_EGPIO_LCD_ON (H3XXX_EGPIO_BASE + 6) /* enable 3.3V to LCD. active high. */
+#define H3XXX_EGPIO_RS232_ON (H3XXX_EGPIO_BASE + 7) /* UART3 transceiver force on. Active high. */
+
+/* H3600 only EGPIO pins */
+#define H3600_EGPIO_LCD_PCI (H3XXX_EGPIO_BASE + 8) /* LCD control IC enable. active high. */
+#define H3600_EGPIO_IR_ON (H3XXX_EGPIO_BASE + 9) /* apply power to IR module. active high. */
+#define H3600_EGPIO_AUD_AMP_ON (H3XXX_EGPIO_BASE + 10) /* apply power to audio power amp. active high. */
+#define H3600_EGPIO_AUD_PWR_ON (H3XXX_EGPIO_BASE + 11) /* apply power to reset of audio circuit. active high. */
+#define H3600_EGPIO_QMUTE (H3XXX_EGPIO_BASE + 12) /* mute control for onboard UDA1341. active high. */
+#define H3600_EGPIO_IR_FSEL (H3XXX_EGPIO_BASE + 13) /* IR speed select: 1->fast, 0->slow */
+#define H3600_EGPIO_LCD_5V_ON (H3XXX_EGPIO_BASE + 14) /* enable 5V to LCD. active high. */
+#define H3600_EGPIO_LVDD_ON (H3XXX_EGPIO_BASE + 15) /* enable 9V and -6.5V to LCD. */
+
+void __init h3xxx_map_io(void);
+void __init h3xxx_mach_init(void);
+
+#endif /* _INCLUDE_H3XXX_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
new file mode 100644
index 000000000..cbedd75a9
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/hardware.h
+ *
+ * Copyright (C) 1998 Nicolas Pitre <nico@fluxnic.net>
+ *
+ * This file contains the hardware definitions for SA1100 architecture
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ * Definitions for SA1111 added.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+
+#define UNCACHEABLE_ADDR 0xfa050000
+
+
+/*
+ * SA1100 internal I/O mappings
+ *
+ * We have the following mapping:
+ * phys virt
+ * 80000000 f8000000
+ * 90000000 fa000000
+ * a0000000 fc000000
+ * b0000000 fe000000
+ */
+
+#define VIO_BASE 0xf8000000 /* virtual start of IO space */
+#define VIO_SHIFT 3 /* x = IO space shrink power */
+#define PIO_START 0x80000000 /* physical start of IO space */
+
+#define io_p2v( x ) \
+ IOMEM( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
+#define io_v2p( x ) \
+ ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
+
+#define CPU_SA1110_A0 (0)
+#define CPU_SA1110_B0 (4)
+#define CPU_SA1110_B1 (5)
+#define CPU_SA1110_B2 (6)
+#define CPU_SA1110_B4 (8)
+
+#define CPU_SA1100_ID (0x4401a110)
+#define CPU_SA1100_MASK (0xfffffff0)
+#define CPU_SA1110_ID (0x6901b110)
+#define CPU_SA1110_MASK (0xfffffff0)
+
+#define __MREG(x) IOMEM(io_p2v(x))
+
+#ifndef __ASSEMBLY__
+
+#include <asm/cputype.h>
+
+#define CPU_REVISION (read_cpuid_id() & 15)
+
+#define cpu_is_sa1100() ((read_cpuid_id() & CPU_SA1100_MASK) == CPU_SA1100_ID)
+#define cpu_is_sa1110() ((read_cpuid_id() & CPU_SA1110_MASK) == CPU_SA1110_ID)
+
+# define __REG(x) (*((volatile unsigned long __iomem *)io_p2v(x)))
+# define __PREG(x) (io_v2p((unsigned long)&(x)))
+
+static inline unsigned long get_clock_tick_rate(void)
+{
+ return 3686400;
+}
+#else
+
+# define __REG(x) io_p2v(x)
+# define __PREG(x) io_v2p(x)
+
+#endif
+
+#include "SA-1100.h"
+
+#ifdef CONFIG_SA1101
+#include "SA-1101.h"
+#endif
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
new file mode 100644
index 000000000..734e30e40
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/irqs.h
+ *
+ * Copyright (C) 1996 Russell King
+ * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
+ * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
+ *
+ * 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs.
+ */
+
+#define IRQ_GPIO0_SC 1
+#define IRQ_GPIO1_SC 2
+#define IRQ_GPIO2_SC 3
+#define IRQ_GPIO3_SC 4
+#define IRQ_GPIO4_SC 5
+#define IRQ_GPIO5_SC 6
+#define IRQ_GPIO6_SC 7
+#define IRQ_GPIO7_SC 8
+#define IRQ_GPIO8_SC 9
+#define IRQ_GPIO9_SC 10
+#define IRQ_GPIO10_SC 11
+#define IRQ_GPIO11_27 12
+#define IRQ_LCD 13 /* LCD controller */
+#define IRQ_Ser0UDC 14 /* Ser. port 0 UDC */
+#define IRQ_Ser1SDLC 15 /* Ser. port 1 SDLC */
+#define IRQ_Ser1UART 16 /* Ser. port 1 UART */
+#define IRQ_Ser2ICP 17 /* Ser. port 2 ICP */
+#define IRQ_Ser3UART 18 /* Ser. port 3 UART */
+#define IRQ_Ser4MCP 19 /* Ser. port 4 MCP */
+#define IRQ_Ser4SSP 20 /* Ser. port 4 SSP */
+#define IRQ_DMA0 21 /* DMA controller channel 0 */
+#define IRQ_DMA1 22 /* DMA controller channel 1 */
+#define IRQ_DMA2 23 /* DMA controller channel 2 */
+#define IRQ_DMA3 24 /* DMA controller channel 3 */
+#define IRQ_DMA4 25 /* DMA controller channel 4 */
+#define IRQ_DMA5 26 /* DMA controller channel 5 */
+#define IRQ_OST0 27 /* OS Timer match 0 */
+#define IRQ_OST1 28 /* OS Timer match 1 */
+#define IRQ_OST2 29 /* OS Timer match 2 */
+#define IRQ_OST3 30 /* OS Timer match 3 */
+#define IRQ_RTC1Hz 31 /* RTC 1 Hz clock */
+#define IRQ_RTCAlrm 32 /* RTC Alarm */
+
+#define IRQ_GPIO0 33
+#define IRQ_GPIO1 34
+#define IRQ_GPIO2 35
+#define IRQ_GPIO3 36
+#define IRQ_GPIO4 37
+#define IRQ_GPIO5 38
+#define IRQ_GPIO6 39
+#define IRQ_GPIO7 40
+#define IRQ_GPIO8 41
+#define IRQ_GPIO9 42
+#define IRQ_GPIO10 43
+#define IRQ_GPIO11 44
+#define IRQ_GPIO12 45
+#define IRQ_GPIO13 46
+#define IRQ_GPIO14 47
+#define IRQ_GPIO15 48
+#define IRQ_GPIO16 49
+#define IRQ_GPIO17 50
+#define IRQ_GPIO18 51
+#define IRQ_GPIO19 52
+#define IRQ_GPIO20 53
+#define IRQ_GPIO21 54
+#define IRQ_GPIO22 55
+#define IRQ_GPIO23 56
+#define IRQ_GPIO24 57
+#define IRQ_GPIO25 58
+#define IRQ_GPIO26 59
+#define IRQ_GPIO27 60
+
+/*
+ * The next 16 interrupts are for board specific purposes. Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these. If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits. IRQs 61 to 76 are available.
+ */
+#define IRQ_BOARD_START 61
+#define IRQ_BOARD_END 77
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * Neponset, SA1111 and UCB1x00 are sparse IRQ aware, so can dynamically
+ * allocate their IRQs above NR_IRQS.
+ *
+ * LoCoMo has 4 additional IRQs, but is not sparse IRQ aware, and so has
+ * to be included in the NR_IRQS calculation.
+ */
+#ifdef CONFIG_SHARP_LOCOMO
+#define NR_IRQS_LOCOMO 4
+#else
+#define NR_IRQS_LOCOMO 0
+#endif
+
+#ifndef NR_IRQS
+#define NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO)
+#endif
+#define SA1100_NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO)
diff --git a/arch/arm/mach-sa1100/include/mach/jornada720.h b/arch/arm/mach-sa1100/include/mach/jornada720.h
new file mode 100644
index 000000000..cc6b4bfce
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/jornada720.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/jornada720.h
+ *
+ * SSP/MCU communication definitions for HP Jornada 710/720/728
+ *
+ * Copyright 2007,2008 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ * Copyright 2000 John Ankcorn <jca@lcs.mit.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ /* HP Jornada 7xx microprocessor commands */
+#define GETBATTERYDATA 0xc0
+#define GETSCANKEYCODE 0x90
+#define GETTOUCHSAMPLES 0xa0
+#define GETCONTRAST 0xD0
+#define SETCONTRAST 0xD1
+#define GETBRIGHTNESS 0xD2
+#define SETBRIGHTNESS 0xD3
+#define CONTRASTOFF 0xD8
+#define BRIGHTNESSOFF 0xD9
+#define PWMOFF 0xDF
+#define TXDUMMY 0x11
+#define ERRORCODE 0x00
+
+extern void jornada_ssp_start(void);
+extern void jornada_ssp_end(void);
+extern int jornada_ssp_inout(u8 byte);
+extern int jornada_ssp_byte(u8 byte);
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
new file mode 100644
index 000000000..2054051eb
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/memory.h
+ *
+ * Copyright (C) 1999-2000 Nicolas Pitre <nico@fluxnic.net>
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Because of the wide memory address space between physical RAM banks on the
+ * SA1100, it's much convenient to use Linux's SparseMEM support to implement
+ * our memory map representation. Assuming all memory nodes have equal access
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * The sparsemem banks are matched with the physical memory bank addresses
+ * which are incidentally the same as virtual addresses.
+ *
+ * node 0: 0xc0000000 - 0xc7ffffff
+ * node 1: 0xc8000000 - 0xcfffffff
+ * node 2: 0xd0000000 - 0xd7ffffff
+ * node 3: 0xd8000000 - 0xdfffffff
+ */
+#define MAX_PHYSMEM_BITS 32
+#define SECTION_SIZE_BITS 27
+
+/*
+ * Cache flushing area - SA1100 zero bank
+ */
+#define FLUSH_BASE_PHYS 0xe0000000
+#define FLUSH_BASE 0xf5000000
+#define FLUSH_BASE_MINICACHE 0xf5100000
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
new file mode 100644
index 000000000..b3d684098
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
@@ -0,0 +1,26 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 2, 2004
+ * Copyright: (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_SA1100_MTD_XIP_H__
+#define __ARCH_SA1100_MTD_XIP_H__
+
+#include <mach/hardware.h>
+
+#define xip_irqpending() (ICIP & ICMR)
+
+/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
+#define xip_currtime() (OSCR)
+#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4)
+
+#endif /* __ARCH_SA1100_MTD_XIP_H__ */
diff --git a/arch/arm/mach-sa1100/include/mach/nanoengine.h b/arch/arm/mach-sa1100/include/mach/nanoengine.h
new file mode 100644
index 000000000..5ebd469a3
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/nanoengine.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/nanoengine.h
+ *
+ * This file contains the hardware specific definitions for nanoEngine.
+ * Only include this file from SA1100-specific files.
+ *
+ * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_NANOENGINE_H
+#define __ASM_ARCH_NANOENGINE_H
+
+#include <mach/irqs.h>
+
+#define GPIO_PC_READY0 11 /* ready for socket 0 (active high)*/
+#define GPIO_PC_READY1 12 /* ready for socket 1 (active high) */
+#define GPIO_PC_CD0 13 /* detect for socket 0 (active low) */
+#define GPIO_PC_CD1 14 /* detect for socket 1 (active low) */
+#define GPIO_PC_RESET0 15 /* reset socket 0 */
+#define GPIO_PC_RESET1 16 /* reset socket 1 */
+
+#define NANOENGINE_IRQ_GPIO_PCI IRQ_GPIO0
+#define NANOENGINE_IRQ_GPIO_PC_READY0 IRQ_GPIO11
+#define NANOENGINE_IRQ_GPIO_PC_READY1 IRQ_GPIO12
+#define NANOENGINE_IRQ_GPIO_PC_CD0 IRQ_GPIO13
+#define NANOENGINE_IRQ_GPIO_PC_CD1 IRQ_GPIO14
+
+/*
+ * nanoEngine Memory Map:
+ *
+ * 0000.0000 - 003F.0000 - 4 MB Flash
+ * C000.0000 - C1FF.FFFF - 32 MB SDRAM
+ * 1860.0000 - 186F.FFFF - 1 MB Internal PCI Memory Read/Write
+ * 18A1.0000 - 18A1.FFFF - 64 KB Internal PCI Config Space
+ * 4000.0000 - 47FF.FFFF - 128 MB External Bus I/O - Multiplexed Mode
+ * 4800.0000 - 4FFF.FFFF - 128 MB External Bus I/O - Non-Multiplexed Mode
+ *
+ */
+
+#define NANO_PCI_MEM_RW_PHYS 0x18600000
+#define NANO_PCI_MEM_RW_VIRT 0xf1000000
+#define NANO_PCI_MEM_RW_SIZE SZ_1M
+#define NANO_PCI_CONFIG_SPACE_PHYS 0x18A10000
+#define NANO_PCI_CONFIG_SPACE_VIRT 0xf2000000
+#define NANO_PCI_CONFIG_SPACE_SIZE SZ_64K
+
+#endif
+
diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h
new file mode 100644
index 000000000..5516a52a3
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/neponset.h
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/neponset.h
+ *
+ * Created 2000/06/05 by Nicolas Pitre <nico@fluxnic.net>
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ * Definitions for Neponset added.
+ */
+#ifndef __ASM_ARCH_NEPONSET_H
+#define __ASM_ARCH_NEPONSET_H
+
+/*
+ * Neponset definitions:
+ */
+#define NCR_GP01_OFF (1<<0)
+#define NCR_TP_PWR_EN (1<<1)
+#define NCR_MS_PWR_EN (1<<2)
+#define NCR_ENET_OSC_EN (1<<3)
+#define NCR_SPI_KB_WK_UP (1<<4)
+#define NCR_A0VPP (1<<5)
+#define NCR_A1VPP (1<<6)
+
+void neponset_ncr_frob(unsigned int, unsigned int);
+#define neponset_ncr_set(v) neponset_ncr_frob(0, v)
+#define neponset_ncr_clear(v) neponset_ncr_frob(v, 0)
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/reset.h b/arch/arm/mach-sa1100/include/mach/reset.h
new file mode 100644
index 000000000..f61957e68
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/reset.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H
+
+#include "hardware.h"
+
+#define RESET_STATUS_HARDWARE (1 << 0) /* Hardware Reset */
+#define RESET_STATUS_WATCHDOG (1 << 1) /* Watchdog Reset */
+#define RESET_STATUS_LOWPOWER (1 << 2) /* Exit from Low Power/Sleep */
+#define RESET_STATUS_GPIO (1 << 3) /* GPIO Reset */
+#define RESET_STATUS_ALL (0xf)
+
+extern unsigned int reset_status;
+static inline void clear_reset_status(unsigned int mask)
+{
+ RCSR = mask;
+}
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-sa1100/include/mach/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h
new file mode 100644
index 000000000..fff39e02b
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/shannon.h
@@ -0,0 +1,39 @@
+#ifndef _INCLUDE_SHANNON_H
+#define _INCLUDE_SHANNON_H
+
+/* taken from comp.os.inferno Tue, 12 Sep 2000 09:21:50 GMT,
+ * written by <forsyth@vitanuova.com> */
+
+#define SHANNON_GPIO_SPI_FLASH GPIO_GPIO (0) /* Output - Driven low, enables SPI to flash */
+#define SHANNON_GPIO_SPI_DSP GPIO_GPIO (1) /* Output - Driven low, enables SPI to DSP */
+/* lcd lower = GPIO 2-9 */
+#define SHANNON_GPIO_SPI_OUTPUT GPIO_GPIO (10) /* Output - SPI output to DSP */
+#define SHANNON_GPIO_SPI_INPUT GPIO_GPIO (11) /* Input - SPI input from DSP */
+#define SHANNON_GPIO_SPI_CLOCK GPIO_GPIO (12) /* Output - Clock for SPI */
+#define SHANNON_GPIO_SPI_FRAME GPIO_GPIO (13) /* Output - Frame marker - not used */
+#define SHANNON_GPIO_SPI_RTS GPIO_GPIO (14) /* Input - SPI Ready to Send */
+#define SHANNON_IRQ_GPIO_SPI_RTS IRQ_GPIO14
+#define SHANNON_GPIO_SPI_CTS GPIO_GPIO (15) /* Output - SPI Clear to Send */
+#define SHANNON_GPIO_IRQ_CODEC GPIO_GPIO (16) /* in, irq from ucb1200 */
+#define SHANNON_IRQ_GPIO_IRQ_CODEC IRQ_GPIO16
+#define SHANNON_GPIO_DSP_RESET GPIO_GPIO (17) /* Output - Drive low to reset the DSP */
+#define SHANNON_GPIO_CODEC_RESET GPIO_GPIO (18) /* Output - Drive low to reset the UCB1x00 */
+#define SHANNON_GPIO_U3_RTS GPIO_GPIO (19) /* ?? */
+#define SHANNON_GPIO_U3_CTS GPIO_GPIO (20) /* ?? */
+#define SHANNON_GPIO_SENSE_12V GPIO_GPIO (21) /* Input, 12v flash unprotect detected */
+#define SHANNON_GPIO_DISP_EN 22 /* out */
+/* XXX GPIO 23 unaccounted for */
+#define SHANNON_GPIO_EJECT_0 24 /* in */
+#define SHANNON_GPIO_EJECT_1 25 /* in */
+#define SHANNON_GPIO_RDY_0 26 /* in */
+#define SHANNON_GPIO_RDY_1 27 /* in */
+
+/* MCP UCB codec GPIO pins... */
+
+#define SHANNON_UCB_GPIO_BACKLIGHT 9
+#define SHANNON_UCB_GPIO_BRIGHT_MASK 7
+#define SHANNON_UCB_GPIO_BRIGHT 6
+#define SHANNON_UCB_GPIO_CONTRAST_MASK 0x3f
+#define SHANNON_UCB_GPIO_CONTRAST 0
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h
new file mode 100644
index 000000000..ac2ea7672
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/simpad.h
@@ -0,0 +1,158 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/simpad.h
+ *
+ * based of assabet.h same as HUW_Webpanel
+ *
+ * This file contains the hardware specific definitions for SIMpad
+ *
+ * 2001/05/14 Juergen Messerer <juergen.messerer@freesurf.ch>
+ */
+
+#ifndef __ASM_ARCH_SIMPAD_H
+#define __ASM_ARCH_SIMPAD_H
+
+
+#define GPIO_UART1_RTS GPIO_GPIO14
+#define GPIO_UART1_DTR GPIO_GPIO7
+#define GPIO_UART1_CTS GPIO_GPIO8
+#define GPIO_UART1_DCD GPIO_GPIO23
+#define GPIO_UART1_DSR GPIO_GPIO6
+
+#define GPIO_UART3_RTS GPIO_GPIO12
+#define GPIO_UART3_DTR GPIO_GPIO16
+#define GPIO_UART3_CTS GPIO_GPIO13
+#define GPIO_UART3_DCD GPIO_GPIO18
+#define GPIO_UART3_DSR GPIO_GPIO17
+
+#define GPIO_POWER_BUTTON GPIO_GPIO0
+#define GPIO_UCB1300_IRQ GPIO_GPIO22 /* UCB GPIO and touchscreen */
+
+#define IRQ_UART1_CTS IRQ_GPIO15
+#define IRQ_UART1_DCD GPIO_GPIO23
+#define IRQ_UART1_DSR GPIO_GPIO6
+#define IRQ_UART3_CTS GPIO_GPIO13
+#define IRQ_UART3_DCD GPIO_GPIO18
+#define IRQ_UART3_DSR GPIO_GPIO17
+
+#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22
+#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0
+
+
+/*--- PCMCIA ---*/
+#define GPIO_CF_CD 24
+#define GPIO_CF_IRQ 1
+
+/*--- SmartCard ---*/
+#define GPIO_SMART_CARD GPIO_GPIO10
+#define IRQ_GPIO_SMARD_CARD IRQ_GPIO10
+
+/*--- ucb1x00 GPIO ---*/
+#define SIMPAD_UCB1X00_GPIO_BASE (GPIO_MAX + 1)
+#define SIMPAD_UCB1X00_GPIO_PROG1 (SIMPAD_UCB1X00_GPIO_BASE)
+#define SIMPAD_UCB1X00_GPIO_PROG2 (SIMPAD_UCB1X00_GPIO_BASE + 1)
+#define SIMPAD_UCB1X00_GPIO_UP (SIMPAD_UCB1X00_GPIO_BASE + 2)
+#define SIMPAD_UCB1X00_GPIO_DOWN (SIMPAD_UCB1X00_GPIO_BASE + 3)
+#define SIMPAD_UCB1X00_GPIO_LEFT (SIMPAD_UCB1X00_GPIO_BASE + 4)
+#define SIMPAD_UCB1X00_GPIO_RIGHT (SIMPAD_UCB1X00_GPIO_BASE + 5)
+#define SIMPAD_UCB1X00_GPIO_6 (SIMPAD_UCB1X00_GPIO_BASE + 6)
+#define SIMPAD_UCB1X00_GPIO_7 (SIMPAD_UCB1X00_GPIO_BASE + 7)
+#define SIMPAD_UCB1X00_GPIO_HEADSET (SIMPAD_UCB1X00_GPIO_BASE + 8)
+#define SIMPAD_UCB1X00_GPIO_SPEAKER (SIMPAD_UCB1X00_GPIO_BASE + 9)
+
+/*--- CS3 Latch ---*/
+#define SIMPAD_CS3_GPIO_BASE (GPIO_MAX + 11)
+#define SIMPAD_CS3_VCC_5V_EN (SIMPAD_CS3_GPIO_BASE)
+#define SIMPAD_CS3_VCC_3V_EN (SIMPAD_CS3_GPIO_BASE + 1)
+#define SIMPAD_CS3_EN1 (SIMPAD_CS3_GPIO_BASE + 2)
+#define SIMPAD_CS3_EN0 (SIMPAD_CS3_GPIO_BASE + 3)
+#define SIMPAD_CS3_DISPLAY_ON (SIMPAD_CS3_GPIO_BASE + 4)
+#define SIMPAD_CS3_PCMCIA_BUFF_DIS (SIMPAD_CS3_GPIO_BASE + 5)
+#define SIMPAD_CS3_MQ_RESET (SIMPAD_CS3_GPIO_BASE + 6)
+#define SIMPAD_CS3_PCMCIA_RESET (SIMPAD_CS3_GPIO_BASE + 7)
+#define SIMPAD_CS3_DECT_POWER_ON (SIMPAD_CS3_GPIO_BASE + 8)
+#define SIMPAD_CS3_IRDA_SD (SIMPAD_CS3_GPIO_BASE + 9)
+#define SIMPAD_CS3_RS232_ON (SIMPAD_CS3_GPIO_BASE + 10)
+#define SIMPAD_CS3_SD_MEDIAQ (SIMPAD_CS3_GPIO_BASE + 11)
+#define SIMPAD_CS3_LED2_ON (SIMPAD_CS3_GPIO_BASE + 12)
+#define SIMPAD_CS3_IRDA_MODE (SIMPAD_CS3_GPIO_BASE + 13)
+#define SIMPAD_CS3_ENABLE_5V (SIMPAD_CS3_GPIO_BASE + 14)
+#define SIMPAD_CS3_RESET_SIMCARD (SIMPAD_CS3_GPIO_BASE + 15)
+
+#define SIMPAD_CS3_PCMCIA_BVD1 (SIMPAD_CS3_GPIO_BASE + 16)
+#define SIMPAD_CS3_PCMCIA_BVD2 (SIMPAD_CS3_GPIO_BASE + 17)
+#define SIMPAD_CS3_PCMCIA_VS1 (SIMPAD_CS3_GPIO_BASE + 18)
+#define SIMPAD_CS3_PCMCIA_VS2 (SIMPAD_CS3_GPIO_BASE + 19)
+#define SIMPAD_CS3_LOCK_IND (SIMPAD_CS3_GPIO_BASE + 20)
+#define SIMPAD_CS3_CHARGING_STATE (SIMPAD_CS3_GPIO_BASE + 21)
+#define SIMPAD_CS3_PCMCIA_SHORT (SIMPAD_CS3_GPIO_BASE + 22)
+#define SIMPAD_CS3_GPIO_23 (SIMPAD_CS3_GPIO_BASE + 23)
+
+#define CS3_BASE IOMEM(0xf1000000)
+
+long simpad_get_cs3_ro(void);
+long simpad_get_cs3_shadow(void);
+void simpad_set_cs3_bit(int value);
+void simpad_clear_cs3_bit(int value);
+
+#define VCC_5V_EN 0x0001 /* For 5V PCMCIA */
+#define VCC_3V_EN 0x0002 /* FOR 3.3V PCMCIA */
+#define EN1 0x0004 /* This is only for EPROM's */
+#define EN0 0x0008 /* Both should be enable for 3.3V or 5V */
+#define DISPLAY_ON 0x0010
+#define PCMCIA_BUFF_DIS 0x0020
+#define MQ_RESET 0x0040
+#define PCMCIA_RESET 0x0080
+#define DECT_POWER_ON 0x0100
+#define IRDA_SD 0x0200 /* Shutdown for powersave */
+#define RS232_ON 0x0400
+#define SD_MEDIAQ 0x0800 /* Shutdown for powersave */
+#define LED2_ON 0x1000
+#define IRDA_MODE 0x2000 /* Fast/Slow IrDA mode */
+#define ENABLE_5V 0x4000 /* Enable 5V circuit */
+#define RESET_SIMCARD 0x8000
+
+#define PCMCIA_BVD1 0x01
+#define PCMCIA_BVD2 0x02
+#define PCMCIA_VS1 0x04
+#define PCMCIA_VS2 0x08
+#define LOCK_IND 0x10
+#define CHARGING_STATE 0x20
+#define PCMCIA_SHORT 0x40
+
+/*--- Battery ---*/
+struct simpad_battery {
+ unsigned char ac_status; /* line connected yes/no */
+ unsigned char status; /* battery loading yes/no */
+ unsigned char percentage; /* percentage loaded */
+ unsigned short life; /* life till empty */
+};
+
+/* These should match the apm_bios.h definitions */
+#define SIMPAD_AC_STATUS_AC_OFFLINE 0x00
+#define SIMPAD_AC_STATUS_AC_ONLINE 0x01
+#define SIMPAD_AC_STATUS_AC_BACKUP 0x02 /* What does this mean? */
+#define SIMPAD_AC_STATUS_AC_UNKNOWN 0xff
+
+/* These bitfields are rarely "or'd" together */
+#define SIMPAD_BATT_STATUS_HIGH 0x01
+#define SIMPAD_BATT_STATUS_LOW 0x02
+#define SIMPAD_BATT_STATUS_CRITICAL 0x04
+#define SIMPAD_BATT_STATUS_CHARGING 0x08
+#define SIMPAD_BATT_STATUS_CHARGE_MAIN 0x10
+#define SIMPAD_BATT_STATUS_DEAD 0x20 /* Battery will not charge */
+#define SIMPAD_BATT_NOT_INSTALLED 0x20 /* For expansion pack batteries */
+#define SIMPAD_BATT_STATUS_FULL 0x40 /* Battery fully charged (and connected to AC) */
+#define SIMPAD_BATT_STATUS_NOBATT 0x80
+#define SIMPAD_BATT_STATUS_UNKNOWN 0xff
+
+extern int simpad_get_battery(struct simpad_battery* );
+
+#endif // __ASM_ARCH_SIMPAD_H
+
+
+
+
+
+
+
+
diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
new file mode 100644
index 000000000..73093dc89
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/uncompress.h
+ *
+ * (C) 1999 Nicolas Pitre <nico@fluxnic.net>
+ *
+ * Reorganised to be machine independent.
+ */
+
+#include "hardware.h"
+
+#define IOMEM(x) (x)
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader. We search for the first enabled
+ * port in the most probable order. If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ */
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+static void putc(int c)
+{
+ unsigned long serial_port;
+
+ do {
+ serial_port = _Ser3UTCR0;
+ if (UART(UTCR3) & UTCR3_TXE) break;
+ serial_port = _Ser1UTCR0;
+ if (UART(UTCR3) & UTCR3_TXE) break;
+ serial_port = _Ser2UTCR0;
+ if (UART(UTCR3) & UTCR3_TXE) break;
+ return;
+ } while (0);
+
+ /* wait for space in the UART's transmitter */
+ while (!(UART(UTSR1) & UTSR1_TNF))
+ barrier();
+
+ /* send the character out. */
+ UART(UTDR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Nothing to do for these
+ */
+#define arch_decomp_setup()