Initial import

11 files changed, 1395 insertions, 0 deletions

diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
new file mode 100644
index 000000000..10f938957
--- /dev/null
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -0,0 +1,82 @@
+menuconfig ARCH_VEXPRESS
+	bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
+	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_SUPPORTS_BIG_ENDIAN
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GLOBAL_TIMER
+	select ARM_TIMER_SP804
+	select COMMON_CLK_VERSATILE
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select HAVE_PATA_PLATFORM
+	select ICST
+	select NO_IOPORT_MAP
+	select PLAT_VERSATILE
+	select POWER_RESET
+	select POWER_RESET_VEXPRESS
+	select POWER_SUPPLY
+	select REGULATOR if MMC_ARMMMCI
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select VEXPRESS_CONFIG
+	select VEXPRESS_SYSCFG
+	select MFD_VEXPRESS_SYSREG
+	help
+	  This option enables support for systems using Cortex processor based
+	  ARM core and logic (FPGA) tiles on the Versatile Express motherboard,
+	  for example:
+
+	  - CoreTile Express A5x2 (V2P-CA5s)
+	  - CoreTile Express A9x4 (V2P-CA9)
+	  - CoreTile Express A15x2 (V2P-CA15)
+	  - LogicTile Express 13MG (V2F-2XV6) with A5, A7, A9 or A15 SMMs
+	    (Soft Macrocell Models)
+	  - Versatile Express RTSMs (Models)
+
+	  You must boot using a Flattened Device Tree in order to use these
+	  platforms. The traditional (ATAGs) boot method is not usable on
+	  these boards with this option.
+
+if ARCH_VEXPRESS
+
+config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
+	bool "Enable A5 and A9 only errata work-arounds"
+	default y
+	select ARM_ERRATA_643719 if SMP
+	select ARM_ERRATA_720789
+	select PL310_ERRATA_753970 if CACHE_L2X0
+	help
+	  Provides common dependencies for Versatile Express platforms
+	  based on Cortex-A5 and Cortex-A9 processors. In order to
+	  build a working kernel, you must also enable relevant core
+	  tile support or Flattened Device Tree based support options.
+
+config ARCH_VEXPRESS_DCSCB
+	bool "Dual Cluster System Control Block (DCSCB) support"
+	depends on MCPM
+	select ARM_CCI400_PORT_CTRL
+	help
+	  Support for the Dual Cluster System Configuration Block (DCSCB).
+	  This is needed to provide CPU and cluster power management
+	  on RTSM implementing big.LITTLE.
+
+config ARCH_VEXPRESS_SPC
+	bool "Versatile Express Serial Power Controller (SPC)"
+	select PM_OPP
+	help
+	  The TC2 (A15x2 A7x3) versatile express core tile integrates a logic
+	  block called Serial Power Controller (SPC) that provides the interface
+	  between the dual cluster test-chip and the M3 microcontroller that
+	  carries out power management.
+
+config ARCH_VEXPRESS_TC2_PM
+	bool "Versatile Express TC2 power management"
+	depends on MCPM
+	select ARM_CCI400_PORT_CTRL
+	select ARCH_VEXPRESS_SPC
+	select ARM_CPU_SUSPEND
+	help
+	  Support for CPU and cluster power management on Versatile Express
+	  with a TC2 (A15x2 A7x3) big.LITTLE core tile.
+
+endif
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
new file mode 100644
index 000000000..f5c1006dd
--- /dev/null
+++ b/arch/arm/mach-vexpress/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile for the linux kernel.
+#
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := \
+	-I$(srctree)/arch/arm/plat-versatile/include
+
+obj-y					:= v2m.o
+obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)	+= dcscb.o	dcscb_setup.o
+CFLAGS_dcscb.o				+= -march=armv7-a
+CFLAGS_REMOVE_dcscb.o			= -pg
+obj-$(CONFIG_ARCH_VEXPRESS_SPC)		+= spc.o
+CFLAGS_REMOVE_spc.o			= -pg
+obj-$(CONFIG_ARCH_VEXPRESS_TC2_PM)	+= tc2_pm.o
+CFLAGS_tc2_pm.o				+= -march=armv7-a
+CFLAGS_REMOVE_tc2_pm.o			= -pg
+obj-$(CONFIG_SMP)			+= platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
new file mode 100644
index 000000000..2a11d3ac8
--- /dev/null
+++ b/arch/arm/mach-vexpress/core.h
@@ -0,0 +1,5 @@
+bool vexpress_smp_init_ops(void);
+
+extern struct smp_operations	vexpress_smp_dt_ops;
+
+extern void vexpress_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c
new file mode 100644
index 000000000..5cedcf572
--- /dev/null
+++ b/arch/arm/mach-vexpress/dcscb.c
@@ -0,0 +1,174 @@
+/*
+ * arch/arm/mach-vexpress/dcscb.c - Dual Cluster System Configuration Block
+ *
+ * Created by:	Nicolas Pitre, May 2012
+ * Copyright:	(C) 2012-2013  Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/of_address.h>
+#include <linux/vexpress.h>
+#include <linux/arm-cci.h>
+
+#include <asm/mcpm.h>
+#include <asm/proc-fns.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+
+
+#define RST_HOLD0	0x0
+#define RST_HOLD1	0x4
+#define SYS_SWRESET	0x8
+#define RST_STAT0	0xc
+#define RST_STAT1	0x10
+#define EAG_CFG_R	0x20
+#define EAG_CFG_W	0x24
+#define KFC_CFG_R	0x28
+#define KFC_CFG_W	0x2c
+#define DCS_CFG_R	0x30
+
+static void __iomem *dcscb_base;
+static int dcscb_allcpus_mask[2];
+
+static int dcscb_cpu_powerup(unsigned int cpu, unsigned int cluster)
+{
+	unsigned int rst_hold, cpumask = (1 << cpu);
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	if (cluster >= 2 || !(cpumask & dcscb_allcpus_mask[cluster]))
+		return -EINVAL;
+
+	rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
+	rst_hold &= ~(cpumask | (cpumask << 4));
+	writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
+	return 0;
+}
+
+static int dcscb_cluster_powerup(unsigned int cluster)
+{
+	unsigned int rst_hold;
+
+	pr_debug("%s: cluster %u\n", __func__, cluster);
+	if (cluster >= 2)
+		return -EINVAL;
+
+	/* remove cluster reset and add individual CPU's reset */
+	rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
+	rst_hold &= ~(1 << 8);
+	rst_hold |= dcscb_allcpus_mask[cluster];
+	writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
+	return 0;
+}
+
+static void dcscb_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster)
+{
+	unsigned int rst_hold;
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cluster >= 2 || !((1 << cpu) & dcscb_allcpus_mask[cluster]));
+
+	rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
+	rst_hold |= (1 << cpu);
+	writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
+}
+
+static void dcscb_cluster_powerdown_prepare(unsigned int cluster)
+{
+	unsigned int rst_hold;
+
+	pr_debug("%s: cluster %u\n", __func__, cluster);
+	BUG_ON(cluster >= 2);
+
+	rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4);
+	rst_hold |= (1 << 8);
+	writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4);
+}
+
+static void dcscb_cpu_cache_disable(void)
+{
+	/* Disable and flush the local CPU cache. */
+	v7_exit_coherency_flush(louis);
+}
+
+static void dcscb_cluster_cache_disable(void)
+{
+	/* Flush all cache levels for this cluster. */
+	v7_exit_coherency_flush(all);
+
+	/*
+	 * A full outer cache flush could be needed at this point
+	 * on platforms with such a cache, depending on where the
+	 * outer cache sits. In some cases the notion of a "last
+	 * cluster standing" would need to be implemented if the
+	 * outer cache is shared across clusters. In any case, when
+	 * the outer cache needs flushing, there is no concurrent
+	 * access to the cache controller to worry about and no
+	 * special locking besides what is already provided by the
+	 * MCPM state machinery is needed.
+	 */
+
+	/*
+	 * Disable cluster-level coherency by masking
+	 * incoming snoops and DVM messages:
+	 */
+	cci_disable_port_by_cpu(read_cpuid_mpidr());
+}
+
+static const struct mcpm_platform_ops dcscb_power_ops = {
+	.cpu_powerup		= dcscb_cpu_powerup,
+	.cluster_powerup	= dcscb_cluster_powerup,
+	.cpu_powerdown_prepare	= dcscb_cpu_powerdown_prepare,
+	.cluster_powerdown_prepare = dcscb_cluster_powerdown_prepare,
+	.cpu_cache_disable	= dcscb_cpu_cache_disable,
+	.cluster_cache_disable	= dcscb_cluster_cache_disable,
+};
+
+extern void dcscb_power_up_setup(unsigned int affinity_level);
+
+static int __init dcscb_init(void)
+{
+	struct device_node *node;
+	unsigned int cfg;
+	int ret;
+
+	if (!cci_probed())
+		return -ENODEV;
+
+	node = of_find_compatible_node(NULL, NULL, "arm,rtsm,dcscb");
+	if (!node)
+		return -ENODEV;
+	dcscb_base = of_iomap(node, 0);
+	if (!dcscb_base)
+		return -EADDRNOTAVAIL;
+	cfg = readl_relaxed(dcscb_base + DCS_CFG_R);
+	dcscb_allcpus_mask[0] = (1 << (((cfg >> 16) >> (0 << 2)) & 0xf)) - 1;
+	dcscb_allcpus_mask[1] = (1 << (((cfg >> 16) >> (1 << 2)) & 0xf)) - 1;
+
+	ret = mcpm_platform_register(&dcscb_power_ops);
+	if (!ret)
+		ret = mcpm_sync_init(dcscb_power_up_setup);
+	if (ret) {
+		iounmap(dcscb_base);
+		return ret;
+	}
+
+	pr_info("VExpress DCSCB support installed\n");
+
+	/*
+	 * Future entries into the kernel can now go
+	 * through the cluster entry vectors.
+	 */
+	vexpress_flags_set(virt_to_phys(mcpm_entry_point));
+
+	return 0;
+}
+
+early_initcall(dcscb_init);
diff --git a/arch/arm/mach-vexpress/dcscb_setup.S b/arch/arm/mach-vexpress/dcscb_setup.S
new file mode 100644
index 000000000..4bb7fbe0f
--- /dev/null
+++ b/arch/arm/mach-vexpress/dcscb_setup.S
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/include/asm/dcscb_setup.S
+ *
+ * Created by:  Dave Martin, 2012-06-22
+ * Copyright:   (C) 2012-2013  Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+
+ENTRY(dcscb_power_up_setup)
+
+	cmp	r0, #0			@ check affinity level
+	beq	2f
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ * The ACTLR SMP bit does not need to be set here, because cpu_resume()
+ * already restores that.
+ *
+ * A15/A7 may not require explicit L2 invalidation on reset, dependent
+ * on hardware integration decisions.
+ * For now, this code assumes that L2 is either already invalidated,
+ * or invalidation is not required.
+ */
+
+	b	cci_enable_port_for_self
+
+2:	@ Implementation-specific local CPU setup operations should go here,
+	@ if any.  In this case, there is nothing to do.
+
+	bx	lr
+
+ENDPROC(dcscb_power_up_setup)
diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c
new file mode 100644
index 000000000..f0ce6b8f5
--- /dev/null
+++ b/arch/arm/mach-vexpress/hotplug.c
@@ -0,0 +1,106 @@
+/*
+ *  linux/arch/arm/mach-realview/hotplug.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+#include <asm/smp_plat.h>
+#include <asm/cp15.h>
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(
+		"mcr	p15, 0, %1, c7, c5, 0\n"
+	"	mcr	p15, 0, %1, c7, c10, 4\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, %3\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	  : "=&r" (v)
+	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(
+		"mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	  : "=&r" (v)
+	  : "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+{
+	/*
+	 * there is no power-control hardware on this platform, so all
+	 * we can do is put the core into WFI; this is safe as the calling
+	 * code will have already disabled interrupts
+	 */
+	for (;;) {
+		wfi();
+
+		if (pen_release == cpu_logical_map(cpu)) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+
+		/*
+		 * Getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
+		 */
+		(*spurious)++;
+	}
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void __ref vexpress_cpu_die(unsigned int cpu)
+{
+	int spurious = 0;
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	cpu_enter_lowpower();
+	platform_do_lowpower(cpu, &spurious);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
new file mode 100644
index 000000000..83188cf18
--- /dev/null
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -0,0 +1,74 @@
+/*
+ *  linux/arch/arm/mach-vexpress/platsmp.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/vexpress.h>
+
+#include <asm/mcpm.h>
+#include <asm/smp_scu.h>
+#include <asm/mach/map.h>
+
+#include <plat/platsmp.h>
+
+#include "core.h"
+
+bool __init vexpress_smp_init_ops(void)
+{
+#ifdef CONFIG_MCPM
+	/*
+	 * The best way to detect a multi-cluster configuration at the moment
+	 * is to look for the presence of a CCI in the system.
+	 * Override the default vexpress_smp_ops if so.
+	 */
+	struct device_node *node;
+	node = of_find_compatible_node(NULL, NULL, "arm,cci-400");
+	if (node && of_device_is_available(node)) {
+		mcpm_smp_set_ops();
+		return true;
+	}
+#endif
+	return false;
+}
+
+static const struct of_device_id vexpress_smp_dt_scu_match[] __initconst = {
+	{ .compatible = "arm,cortex-a5-scu", },
+	{ .compatible = "arm,cortex-a9-scu", },
+	{}
+};
+
+static void __init vexpress_smp_dt_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *scu = of_find_matching_node(NULL,
+			vexpress_smp_dt_scu_match);
+
+	if (scu)
+		scu_enable(of_iomap(scu, 0));
+
+	/*
+	 * Write the address of secondary startup into the
+	 * system-wide flags register. The boot monitor waits
+	 * until it receives a soft interrupt, and then the
+	 * secondary CPU branches to this address.
+	 */
+	vexpress_flags_set(virt_to_phys(versatile_secondary_startup));
+}
+
+struct smp_operations __initdata vexpress_smp_dt_ops = {
+	.smp_prepare_cpus	= vexpress_smp_dt_prepare_cpus,
+	.smp_secondary_init	= versatile_secondary_init,
+	.smp_boot_secondary	= versatile_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= vexpress_cpu_die,
+#endif
+};
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
new file mode 100644
index 000000000..f61158c6c
--- /dev/null
+++ b/arch/arm/mach-vexpress/spc.c
@@ -0,0 +1,592 @@
+/*
+ * Versatile Express Serial Power Controller (SPC) support
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ *
+ * Authors: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+ *          Achin Gupta           <achin.gupta@arm.com>
+ *          Lorenzo Pieralisi     <lorenzo.pieralisi@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+#include <linux/semaphore.h>
+
+#include <asm/cacheflush.h>
+
+#define SPCLOG "vexpress-spc: "
+
+#define PERF_LVL_A15		0x00
+#define PERF_REQ_A15		0x04
+#define PERF_LVL_A7		0x08
+#define PERF_REQ_A7		0x0c
+#define COMMS			0x10
+#define COMMS_REQ		0x14
+#define PWC_STATUS		0x18
+#define PWC_FLAG		0x1c
+
+/* SPC wake-up IRQs status and mask */
+#define WAKE_INT_MASK		0x24
+#define WAKE_INT_RAW		0x28
+#define WAKE_INT_STAT		0x2c
+/* SPC power down registers */
+#define A15_PWRDN_EN		0x30
+#define A7_PWRDN_EN		0x34
+/* SPC per-CPU mailboxes */
+#define A15_BX_ADDR0		0x68
+#define A7_BX_ADDR0		0x78
+
+/* SPC CPU/cluster reset statue */
+#define STANDBYWFI_STAT		0x3c
+#define STANDBYWFI_STAT_A15_CPU_MASK(cpu)	(1 << (cpu))
+#define STANDBYWFI_STAT_A7_CPU_MASK(cpu)	(1 << (3 + (cpu)))
+
+/* SPC system config interface registers */
+#define SYSCFG_WDATA		0x70
+#define SYSCFG_RDATA		0x74
+
+/* A15/A7 OPP virtual register base */
+#define A15_PERFVAL_BASE	0xC10
+#define A7_PERFVAL_BASE		0xC30
+
+/* Config interface control bits */
+#define SYSCFG_START		(1 << 31)
+#define SYSCFG_SCC		(6 << 20)
+#define SYSCFG_STAT		(14 << 20)
+
+/* wake-up interrupt masks */
+#define GBL_WAKEUP_INT_MSK	(0x3 << 10)
+
+/* TC2 static dual-cluster configuration */
+#define MAX_CLUSTERS		2
+
+/*
+ * Even though the SPC takes max 3-5 ms to complete any OPP/COMMS
+ * operation, the operation could start just before jiffie is about
+ * to be incremented. So setting timeout value of 20ms = 2jiffies@100Hz
+ */
+#define TIMEOUT_US	20000
+
+#define MAX_OPPS	8
+#define CA15_DVFS	0
+#define CA7_DVFS	1
+#define SPC_SYS_CFG	2
+#define STAT_COMPLETE(type)	((1 << 0) << (type << 2))
+#define STAT_ERR(type)		((1 << 1) << (type << 2))
+#define RESPONSE_MASK(type)	(STAT_COMPLETE(type) | STAT_ERR(type))
+
+struct ve_spc_opp {
+	unsigned long freq;
+	unsigned long u_volt;
+};
+
+struct ve_spc_drvdata {
+	void __iomem *baseaddr;
+	/*
+	 * A15s cluster identifier
+	 * It corresponds to A15 processors MPIDR[15:8] bitfield
+	 */
+	u32 a15_clusid;
+	uint32_t cur_rsp_mask;
+	uint32_t cur_rsp_stat;
+	struct semaphore sem;
+	struct completion done;
+	struct ve_spc_opp *opps[MAX_CLUSTERS];
+	int num_opps[MAX_CLUSTERS];
+};
+
+static struct ve_spc_drvdata *info;
+
+static inline bool cluster_is_a15(u32 cluster)
+{
+	return cluster == info->a15_clusid;
+}
+
+/**
+ * ve_spc_global_wakeup_irq()
+ *
+ * Function to set/clear global wakeup IRQs. Not protected by locking since
+ * it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
+ *
+ * @set: if true, global wake-up IRQs are set, if false they are cleared
+ */
+void ve_spc_global_wakeup_irq(bool set)
+{
+	u32 reg;
+
+	reg = readl_relaxed(info->baseaddr + WAKE_INT_MASK);
+
+	if (set)
+		reg |= GBL_WAKEUP_INT_MSK;
+	else
+		reg &= ~GBL_WAKEUP_INT_MSK;
+
+	writel_relaxed(reg, info->baseaddr + WAKE_INT_MASK);
+}
+
+/**
+ * ve_spc_cpu_wakeup_irq()
+ *
+ * Function to set/clear per-CPU wake-up IRQs. Not protected by locking since
+ * it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @cpu: mpidr[7:0] bitfield describing cpu affinity level
+ * @set: if true, wake-up IRQs are set, if false they are cleared
+ */
+void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set)
+{
+	u32 mask, reg;
+
+	if (cluster >= MAX_CLUSTERS)
+		return;
+
+	mask = 1 << cpu;
+
+	if (!cluster_is_a15(cluster))
+		mask <<= 4;
+
+	reg = readl_relaxed(info->baseaddr + WAKE_INT_MASK);
+
+	if (set)
+		reg |= mask;
+	else
+		reg &= ~mask;
+
+	writel_relaxed(reg, info->baseaddr + WAKE_INT_MASK);
+}
+
+/**
+ * ve_spc_set_resume_addr() - set the jump address used for warm boot
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @cpu: mpidr[7:0] bitfield describing cpu affinity level
+ * @addr: physical resume address
+ */
+void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr)
+{
+	void __iomem *baseaddr;
+
+	if (cluster >= MAX_CLUSTERS)
+		return;
+
+	if (cluster_is_a15(cluster))
+		baseaddr = info->baseaddr + A15_BX_ADDR0 + (cpu << 2);
+	else
+		baseaddr = info->baseaddr + A7_BX_ADDR0 + (cpu << 2);
+
+	writel_relaxed(addr, baseaddr);
+}
+
+/**
+ * ve_spc_powerdown()
+ *
+ * Function to enable/disable cluster powerdown. Not protected by locking
+ * since it might be used in code paths where normal cacheable locks are not
+ * working. Locking must be provided by the caller to ensure atomicity.
+ *
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ * @enable: if true enables powerdown, if false disables it
+ */
+void ve_spc_powerdown(u32 cluster, bool enable)
+{
+	u32 pwdrn_reg;
+
+	if (cluster >= MAX_CLUSTERS)
+		return;
+
+	pwdrn_reg = cluster_is_a15(cluster) ? A15_PWRDN_EN : A7_PWRDN_EN;
+	writel_relaxed(enable, info->baseaddr + pwdrn_reg);
+}
+
+static u32 standbywfi_cpu_mask(u32 cpu, u32 cluster)
+{
+	return cluster_is_a15(cluster) ?
+		  STANDBYWFI_STAT_A15_CPU_MASK(cpu)
+		: STANDBYWFI_STAT_A7_CPU_MASK(cpu);
+}
+
+/**
+ * ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+ *
+ * @cpu: mpidr[7:0] bitfield describing CPU affinity level within cluster
+ * @cluster: mpidr[15:8] bitfield describing cluster affinity level
+ *
+ * @return: non-zero if and only if the specified CPU is in WFI
+ *
+ * Take care when interpreting the result of this function: a CPU might
+ * be in WFI temporarily due to idle, and is not necessarily safely
+ * parked.
+ */
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster)
+{
+	int ret;
+	u32 mask = standbywfi_cpu_mask(cpu, cluster);
+
+	if (cluster >= MAX_CLUSTERS)
+		return 1;
+
+	ret = readl_relaxed(info->baseaddr + STANDBYWFI_STAT);
+
+	pr_debug("%s: PCFGREG[0x%X] = 0x%08X, mask = 0x%X\n",
+		 __func__, STANDBYWFI_STAT, ret, mask);
+
+	return ret & mask;
+}
+
+static int ve_spc_get_performance(int cluster, u32 *freq)
+{
+	struct ve_spc_opp *opps = info->opps[cluster];
+	u32 perf_cfg_reg = 0;
+	u32 perf;
+
+	perf_cfg_reg = cluster_is_a15(cluster) ? PERF_LVL_A15 : PERF_LVL_A7;
+
+	perf = readl_relaxed(info->baseaddr + perf_cfg_reg);
+	if (perf >= info->num_opps[cluster])
+		return -EINVAL;
+
+	opps += perf;
+	*freq = opps->freq;
+
+	return 0;
+}
+
+/* find closest match to given frequency in OPP table */
+static int ve_spc_round_performance(int cluster, u32 freq)
+{
+	int idx, max_opp = info->num_opps[cluster];
+	struct ve_spc_opp *opps = info->opps[cluster];
+	u32 fmin = 0, fmax = ~0, ftmp;
+
+	freq /= 1000; /* OPP entries in kHz */
+	for (idx = 0; idx < max_opp; idx++, opps++) {
+		ftmp = opps->freq;
+		if (ftmp >= freq) {
+			if (ftmp <= fmax)
+				fmax = ftmp;
+		} else {
+			if (ftmp >= fmin)
+				fmin = ftmp;
+		}
+	}
+	if (fmax != ~0)
+		return fmax * 1000;
+	else
+		return fmin * 1000;
+}
+
+static int ve_spc_find_performance_index(int cluster, u32 freq)
+{
+	int idx, max_opp = info->num_opps[cluster];
+	struct ve_spc_opp *opps = info->opps[cluster];
+
+	for (idx = 0; idx < max_opp; idx++, opps++)
+		if (opps->freq == freq)
+			break;
+	return (idx == max_opp) ? -EINVAL : idx;
+}
+
+static int ve_spc_waitforcompletion(int req_type)
+{
+	int ret = wait_for_completion_interruptible_timeout(
+			&info->done, usecs_to_jiffies(TIMEOUT_US));
+	if (ret == 0)
+		ret = -ETIMEDOUT;
+	else if (ret > 0)
+		ret = info->cur_rsp_stat & STAT_COMPLETE(req_type) ? 0 : -EIO;
+	return ret;
+}
+
+static int ve_spc_set_performance(int cluster, u32 freq)
+{
+	u32 perf_cfg_reg, perf_stat_reg;
+	int ret, perf, req_type;
+
+	if (cluster_is_a15(cluster)) {
+		req_type = CA15_DVFS;
+		perf_cfg_reg = PERF_LVL_A15;
+		perf_stat_reg = PERF_REQ_A15;
+	} else {
+		req_type = CA7_DVFS;
+		perf_cfg_reg = PERF_LVL_A7;
+		perf_stat_reg = PERF_REQ_A7;
+	}
+
+	perf = ve_spc_find_performance_index(cluster, freq);
+
+	if (perf < 0)
+		return perf;
+
+	if (down_timeout(&info->sem, usecs_to_jiffies(TIMEOUT_US)))
+		return -ETIME;
+
+	init_completion(&info->done);
+	info->cur_rsp_mask = RESPONSE_MASK(req_type);
+
+	writel(perf, info->baseaddr + perf_cfg_reg);
+	ret = ve_spc_waitforcompletion(req_type);
+
+	info->cur_rsp_mask = 0;
+	up(&info->sem);
+
+	return ret;
+}
+
+static int ve_spc_read_sys_cfg(int func, int offset, uint32_t *data)
+{
+	int ret;
+
+	if (down_timeout(&info->sem, usecs_to_jiffies(TIMEOUT_US)))
+		return -ETIME;
+
+	init_completion(&info->done);
+	info->cur_rsp_mask = RESPONSE_MASK(SPC_SYS_CFG);
+
+	/* Set the control value */
+	writel(SYSCFG_START | func | offset >> 2, info->baseaddr + COMMS);
+	ret = ve_spc_waitforcompletion(SPC_SYS_CFG);
+
+	if (ret == 0)
+		*data = readl(info->baseaddr + SYSCFG_RDATA);
+
+	info->cur_rsp_mask = 0;
+	up(&info->sem);
+
+	return ret;
+}
+
+static irqreturn_t ve_spc_irq_handler(int irq, void *data)
+{
+	struct ve_spc_drvdata *drv_data = data;
+	uint32_t status = readl_relaxed(drv_data->baseaddr + PWC_STATUS);
+
+	if (info->cur_rsp_mask & status) {
+		info->cur_rsp_stat = status;
+		complete(&drv_data->done);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ *  +--------------------------+
+ *  | 31      20 | 19        0 |
+ *  +--------------------------+
+ *  |   m_volt   |  freq(kHz)  |
+ *  +--------------------------+
+ */
+#define MULT_FACTOR	20
+#define VOLT_SHIFT	20
+#define FREQ_MASK	(0xFFFFF)
+static int ve_spc_populate_opps(uint32_t cluster)
+{
+	uint32_t data = 0, off, ret, idx;
+	struct ve_spc_opp *opps;
+
+	opps = kzalloc(sizeof(*opps) * MAX_OPPS, GFP_KERNEL);
+	if (!opps)
+		return -ENOMEM;
+
+	info->opps[cluster] = opps;
+
+	off = cluster_is_a15(cluster) ? A15_PERFVAL_BASE : A7_PERFVAL_BASE;
+	for (idx = 0; idx < MAX_OPPS; idx++, off += 4, opps++) {
+		ret = ve_spc_read_sys_cfg(SYSCFG_SCC, off, &data);
+		if (!ret) {
+			opps->freq = (data & FREQ_MASK) * MULT_FACTOR;
+			opps->u_volt = (data >> VOLT_SHIFT) * 1000;
+		} else {
+			break;
+		}
+	}
+	info->num_opps[cluster] = idx;
+
+	return ret;
+}
+
+static int ve_init_opp_table(struct device *cpu_dev)
+{
+	int cluster;
+	int idx, ret = 0, max_opp;
+	struct ve_spc_opp *opps;
+
+	cluster = topology_physical_package_id(cpu_dev->id);
+	cluster = cluster < 0 ? 0 : cluster;
+
+	max_opp = info->num_opps[cluster];
+	opps = info->opps[cluster];
+
+	for (idx = 0; idx < max_opp; idx++, opps++) {
+		ret = dev_pm_opp_add(cpu_dev, opps->freq * 1000, opps->u_volt);
+		if (ret) {
+			dev_warn(cpu_dev, "failed to add opp %lu %lu\n",
+				 opps->freq, opps->u_volt);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+int __init ve_spc_init(void __iomem *baseaddr, u32 a15_clusid, int irq)
+{
+	int ret;
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		pr_err(SPCLOG "unable to allocate mem\n");
+		return -ENOMEM;
+	}
+
+	info->baseaddr = baseaddr;
+	info->a15_clusid = a15_clusid;
+
+	if (irq <= 0) {
+		pr_err(SPCLOG "Invalid IRQ %d\n", irq);
+		kfree(info);
+		return -EINVAL;
+	}
+
+	init_completion(&info->done);
+
+	readl_relaxed(info->baseaddr + PWC_STATUS);
+
+	ret = request_irq(irq, ve_spc_irq_handler, IRQF_TRIGGER_HIGH
+				| IRQF_ONESHOT, "vexpress-spc", info);
+	if (ret) {
+		pr_err(SPCLOG "IRQ %d request failed\n", irq);
+		kfree(info);
+		return -ENODEV;
+	}
+
+	sema_init(&info->sem, 1);
+	/*
+	 * Multi-cluster systems may need this data when non-coherent, during
+	 * cluster power-up/power-down. Make sure driver info reaches main
+	 * memory.
+	 */
+	sync_cache_w(info);
+	sync_cache_w(&info);
+
+	return 0;
+}
+
+struct clk_spc {
+	struct clk_hw hw;
+	int cluster;
+};
+
+#define to_clk_spc(spc) container_of(spc, struct clk_spc, hw)
+static unsigned long spc_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct clk_spc *spc = to_clk_spc(hw);
+	u32 freq;
+
+	if (ve_spc_get_performance(spc->cluster, &freq))
+		return -EIO;
+
+	return freq * 1000;
+}
+
+static long spc_round_rate(struct clk_hw *hw, unsigned long drate,
+		unsigned long *parent_rate)
+{
+	struct clk_spc *spc = to_clk_spc(hw);
+
+	return ve_spc_round_performance(spc->cluster, drate);
+}
+
+static int spc_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_spc *spc = to_clk_spc(hw);
+
+	return ve_spc_set_performance(spc->cluster, rate / 1000);
+}
+
+static struct clk_ops clk_spc_ops = {
+	.recalc_rate = spc_recalc_rate,
+	.round_rate = spc_round_rate,
+	.set_rate = spc_set_rate,
+};
+
+static struct clk *ve_spc_clk_register(struct device *cpu_dev)
+{
+	struct clk_init_data init;
+	struct clk_spc *spc;
+
+	spc = kzalloc(sizeof(*spc), GFP_KERNEL);
+	if (!spc) {
+		pr_err("could not allocate spc clk\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	spc->hw.init = &init;
+	spc->cluster = topology_physical_package_id(cpu_dev->id);
+
+	spc->cluster = spc->cluster < 0 ? 0 : spc->cluster;
+
+	init.name = dev_name(cpu_dev);
+	init.ops = &clk_spc_ops;
+	init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE;
+	init.num_parents = 0;
+
+	return devm_clk_register(cpu_dev, &spc->hw);
+}
+
+static int __init ve_spc_clk_init(void)
+{
+	int cpu;
+	struct clk *clk;
+
+	if (!info)
+		return 0; /* Continue only if SPC is initialised */
+
+	if (ve_spc_populate_opps(0) || ve_spc_populate_opps(1)) {
+		pr_err("failed to build OPP table\n");
+		return -ENODEV;
+	}
+
+	for_each_possible_cpu(cpu) {
+		struct device *cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_warn("failed to get cpu%d device\n", cpu);
+			continue;
+		}
+		clk = ve_spc_clk_register(cpu_dev);
+		if (IS_ERR(clk)) {
+			pr_warn("failed to register cpu%d clock\n", cpu);
+			continue;
+		}
+		if (clk_register_clkdev(clk, NULL, dev_name(cpu_dev))) {
+			pr_warn("failed to register cpu%d clock lookup\n", cpu);
+			continue;
+		}
+
+		if (ve_init_opp_table(cpu_dev))
+			pr_warn("failed to initialise cpu%d opp table\n", cpu);
+	}
+
+	platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL, 0);
+	return 0;
+}
+module_init(ve_spc_clk_init);
diff --git a/arch/arm/mach-vexpress/spc.h b/arch/arm/mach-vexpress/spc.h
new file mode 100644
index 000000000..793d06524
--- /dev/null
+++ b/arch/arm/mach-vexpress/spc.h
@@ -0,0 +1,25 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2012 ARM Limited
+ */
+
+
+#ifndef __SPC_H_
+#define __SPC_H_
+
+int __init ve_spc_init(void __iomem *base, u32 a15_clusid, int irq);
+void ve_spc_global_wakeup_irq(bool set);
+void ve_spc_cpu_wakeup_irq(u32 cluster, u32 cpu, bool set);
+void ve_spc_set_resume_addr(u32 cluster, u32 cpu, u32 addr);
+void ve_spc_powerdown(u32 cluster, bool enable);
+int ve_spc_cpu_in_wfi(u32 cpu, u32 cluster);
+
+#endif
diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c
new file mode 100644
index 000000000..b3328cd46
--- /dev/null
+++ b/arch/arm/mach-vexpress/tc2_pm.c
@@ -0,0 +1,266 @@
+/*
+ * arch/arm/mach-vexpress/tc2_pm.c - TC2 power management support
+ *
+ * Created by:	Nicolas Pitre, October 2012
+ * Copyright:	(C) 2012-2013  Linaro Limited
+ *
+ * Some portions of this file were originally written by Achin Gupta
+ * Copyright:   (C) 2012  ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/errno.h>
+#include <linux/irqchip/arm-gic.h>
+
+#include <asm/mcpm.h>
+#include <asm/proc-fns.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/cp15.h>
+
+#include <linux/arm-cci.h>
+
+#include "spc.h"
+
+/* SCC conf registers */
+#define RESET_CTRL		0x018
+#define RESET_A15_NCORERESET(cpu)	(1 << (2 + (cpu)))
+#define RESET_A7_NCORERESET(cpu)	(1 << (16 + (cpu)))
+
+#define A15_CONF		0x400
+#define A7_CONF			0x500
+#define SYS_INFO		0x700
+#define SPC_BASE		0xb00
+
+static void __iomem *scc;
+
+#define TC2_CLUSTERS			2
+#define TC2_MAX_CPUS_PER_CLUSTER	3
+
+static unsigned int tc2_nr_cpus[TC2_CLUSTERS];
+
+static int tc2_pm_cpu_powerup(unsigned int cpu, unsigned int cluster)
+{
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster])
+		return -EINVAL;
+	ve_spc_set_resume_addr(cluster, cpu,
+			       virt_to_phys(mcpm_entry_point));
+	ve_spc_cpu_wakeup_irq(cluster, cpu, true);
+	return 0;
+}
+
+static int tc2_pm_cluster_powerup(unsigned int cluster)
+{
+	pr_debug("%s: cluster %u\n", __func__, cluster);
+	if (cluster >= TC2_CLUSTERS)
+		return -EINVAL;
+	ve_spc_powerdown(cluster, false);
+	return 0;
+}
+
+static void tc2_pm_cpu_powerdown_prepare(unsigned int cpu, unsigned int cluster)
+{
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+	ve_spc_cpu_wakeup_irq(cluster, cpu, true);
+	/*
+	 * If the CPU is committed to power down, make sure
+	 * the power controller will be in charge of waking it
+	 * up upon IRQ, ie IRQ lines are cut from GIC CPU IF
+	 * to the CPU by disabling the GIC CPU IF to prevent wfi
+	 * from completing execution behind power controller back
+	 */
+	gic_cpu_if_down();
+}
+
+static void tc2_pm_cluster_powerdown_prepare(unsigned int cluster)
+{
+	pr_debug("%s: cluster %u\n", __func__, cluster);
+	BUG_ON(cluster >= TC2_CLUSTERS);
+	ve_spc_powerdown(cluster, true);
+	ve_spc_global_wakeup_irq(true);
+}
+
+static void tc2_pm_cpu_cache_disable(void)
+{
+	v7_exit_coherency_flush(louis);
+}
+
+static void tc2_pm_cluster_cache_disable(void)
+{
+	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A15) {
+		/*
+		 * On the Cortex-A15 we need to disable
+		 * L2 prefetching before flushing the cache.
+		 */
+		asm volatile(
+		"mcr	p15, 1, %0, c15, c0, 3 \n\t"
+		"isb	\n\t"
+		"dsb	"
+		: : "r" (0x400) );
+	}
+
+	v7_exit_coherency_flush(all);
+	cci_disable_port_by_cpu(read_cpuid_mpidr());
+}
+
+static int tc2_core_in_reset(unsigned int cpu, unsigned int cluster)
+{
+	u32 mask = cluster ?
+		  RESET_A7_NCORERESET(cpu)
+		: RESET_A15_NCORERESET(cpu);
+
+	return !(readl_relaxed(scc + RESET_CTRL) & mask);
+}
+
+#define POLL_MSEC 10
+#define TIMEOUT_MSEC 1000
+
+static int tc2_pm_wait_for_powerdown(unsigned int cpu, unsigned int cluster)
+{
+	unsigned tries;
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+
+	for (tries = 0; tries < TIMEOUT_MSEC / POLL_MSEC; ++tries) {
+		pr_debug("%s(cpu=%u, cluster=%u): RESET_CTRL = 0x%08X\n",
+			 __func__, cpu, cluster,
+			 readl_relaxed(scc + RESET_CTRL));
+
+		/*
+		 * We need the CPU to reach WFI, but the power
+		 * controller may put the cluster in reset and
+		 * power it off as soon as that happens, before
+		 * we have a chance to see STANDBYWFI.
+		 *
+		 * So we need to check for both conditions:
+		 */
+		if (tc2_core_in_reset(cpu, cluster) ||
+		    ve_spc_cpu_in_wfi(cpu, cluster))
+			return 0; /* success: the CPU is halted */
+
+		/* Otherwise, wait and retry: */
+		msleep(POLL_MSEC);
+	}
+
+	return -ETIMEDOUT; /* timeout */
+}
+
+static void tc2_pm_cpu_suspend_prepare(unsigned int cpu, unsigned int cluster)
+{
+	ve_spc_set_resume_addr(cluster, cpu, virt_to_phys(mcpm_entry_point));
+}
+
+static void tc2_pm_cpu_is_up(unsigned int cpu, unsigned int cluster)
+{
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	BUG_ON(cluster >= TC2_CLUSTERS || cpu >= TC2_MAX_CPUS_PER_CLUSTER);
+	ve_spc_cpu_wakeup_irq(cluster, cpu, false);
+	ve_spc_set_resume_addr(cluster, cpu, 0);
+}
+
+static void tc2_pm_cluster_is_up(unsigned int cluster)
+{
+	pr_debug("%s: cluster %u\n", __func__, cluster);
+	BUG_ON(cluster >= TC2_CLUSTERS);
+	ve_spc_powerdown(cluster, false);
+	ve_spc_global_wakeup_irq(false);
+}
+
+static const struct mcpm_platform_ops tc2_pm_power_ops = {
+	.cpu_powerup		= tc2_pm_cpu_powerup,
+	.cluster_powerup	= tc2_pm_cluster_powerup,
+	.cpu_suspend_prepare	= tc2_pm_cpu_suspend_prepare,
+	.cpu_powerdown_prepare	= tc2_pm_cpu_powerdown_prepare,
+	.cluster_powerdown_prepare = tc2_pm_cluster_powerdown_prepare,
+	.cpu_cache_disable	= tc2_pm_cpu_cache_disable,
+	.cluster_cache_disable	= tc2_pm_cluster_cache_disable,
+	.wait_for_powerdown	= tc2_pm_wait_for_powerdown,
+	.cpu_is_up		= tc2_pm_cpu_is_up,
+	.cluster_is_up		= tc2_pm_cluster_is_up,
+};
+
+/*
+ * Enable cluster-level coherency, in preparation for turning on the MMU.
+ */
+static void __naked tc2_pm_power_up_setup(unsigned int affinity_level)
+{
+	asm volatile (" \n"
+"	cmp	r0, #1 \n"
+"	bxne	lr \n"
+"	b	cci_enable_port_for_self ");
+}
+
+static int __init tc2_pm_init(void)
+{
+	unsigned int mpidr, cpu, cluster;
+	int ret, irq;
+	u32 a15_cluster_id, a7_cluster_id, sys_info;
+	struct device_node *np;
+
+	/*
+	 * The power management-related features are hidden behind
+	 * SCC registers. We need to extract runtime information like
+	 * cluster ids and number of CPUs really available in clusters.
+	 */
+	np = of_find_compatible_node(NULL, NULL,
+			"arm,vexpress-scc,v2p-ca15_a7");
+	scc = of_iomap(np, 0);
+	if (!scc)
+		return -ENODEV;
+
+	a15_cluster_id = readl_relaxed(scc + A15_CONF) & 0xf;
+	a7_cluster_id = readl_relaxed(scc + A7_CONF) & 0xf;
+	if (a15_cluster_id >= TC2_CLUSTERS || a7_cluster_id >= TC2_CLUSTERS)
+		return -EINVAL;
+
+	sys_info = readl_relaxed(scc + SYS_INFO);
+	tc2_nr_cpus[a15_cluster_id] = (sys_info >> 16) & 0xf;
+	tc2_nr_cpus[a7_cluster_id] = (sys_info >> 20) & 0xf;
+
+	irq = irq_of_parse_and_map(np, 0);
+
+	/*
+	 * A subset of the SCC registers is also used to communicate
+	 * with the SPC (power controller). We need to be able to
+	 * drive it very early in the boot process to power up
+	 * processors, so we initialize the SPC driver here.
+	 */
+	ret = ve_spc_init(scc + SPC_BASE, a15_cluster_id, irq);
+	if (ret)
+		return ret;
+
+	if (!cci_probed())
+		return -ENODEV;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	if (cluster >= TC2_CLUSTERS || cpu >= tc2_nr_cpus[cluster]) {
+		pr_err("%s: boot CPU is out of bound!\n", __func__);
+		return -EINVAL;
+	}
+
+	ret = mcpm_platform_register(&tc2_pm_power_ops);
+	if (!ret) {
+		mcpm_sync_init(tc2_pm_power_up_setup);
+		/* test if we can (re)enable the CCI on our own */
+		BUG_ON(mcpm_loopback(tc2_pm_cluster_cache_disable) != 0);
+		pr_info("TC2 power management initialized\n");
+	}
+	return ret;
+}
+
+early_initcall(tc2_pm_init);
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
new file mode 100644
index 000000000..a0400f4cc
--- /dev/null
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -0,0 +1,16 @@
+#include <asm/mach/arch.h>
+
+#include "core.h"
+
+static const char * const v2m_dt_match[] __initconst = {
+	"arm,vexpress",
+	NULL,
+};
+
+DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
+	.dt_compat	= v2m_dt_match,
+	.l2c_aux_val	= 0x00400000,
+	.l2c_aux_mask	= 0xfe0fffff,
+	.smp		= smp_ops(vexpress_smp_dt_ops),
+	.smp_init	= smp_init_ops(vexpress_smp_init_ops),
+MACHINE_END