Initial import

1 files changed, 285 insertions, 0 deletions

diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
new file mode 100644
index 000000000..2c4dbb1f4
--- /dev/null
+++ b/arch/arm/plat-pxa/mfp.c
@@ -0,0 +1,285 @@
+/*
+ * linux/arch/arm/plat-pxa/mfp.c
+ *
+ *   Multi-Function Pin Support
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <plat/mfp.h>
+
+#define MFPR_SIZE	(PAGE_SIZE)
+
+/* MFPR register bit definitions */
+#define MFPR_PULL_SEL		(0x1 << 15)
+#define MFPR_PULLUP_EN		(0x1 << 14)
+#define MFPR_PULLDOWN_EN	(0x1 << 13)
+#define MFPR_SLEEP_SEL		(0x1 << 9)
+#define MFPR_SLEEP_OE_N		(0x1 << 7)
+#define MFPR_EDGE_CLEAR		(0x1 << 6)
+#define MFPR_EDGE_FALL_EN	(0x1 << 5)
+#define MFPR_EDGE_RISE_EN	(0x1 << 4)
+
+#define MFPR_SLEEP_DATA(x)	((x) << 8)
+#define MFPR_DRIVE(x)		(((x) & 0x7) << 10)
+#define MFPR_AF_SEL(x)		(((x) & 0x7) << 0)
+
+#define MFPR_EDGE_NONE		(0)
+#define MFPR_EDGE_RISE		(MFPR_EDGE_RISE_EN)
+#define MFPR_EDGE_FALL		(MFPR_EDGE_FALL_EN)
+#define MFPR_EDGE_BOTH		(MFPR_EDGE_RISE | MFPR_EDGE_FALL)
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
+ *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
+ *
+ * Input            0          X(0)        X(0)        X(0)       0
+ * Drive 0          0          0           0           X(1)       0
+ * Drive 1          0          1           X(1)        0	  0
+ * Pull hi (1)      1          X(1)        1           0	  0
+ * Pull lo (0)      1          X(0)        0           1	  0
+ * Z (float)        1          X(0)        0           0	  0
+ */
+#define MFPR_LPM_INPUT		(0)
+#define MFPR_LPM_DRIVE_LOW	(MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
+#define MFPR_LPM_DRIVE_HIGH    	(MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
+#define MFPR_LPM_PULL_LOW      	(MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_PULL_HIGH     	(MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_FLOAT         	(MFPR_SLEEP_OE_N)
+#define MFPR_LPM_MASK		(0xe080)
+
+/*
+ * The pullup and pulldown state of the MFP pin at run mode is by default
+ * determined by the selected alternate function. In case that some buggy
+ * devices need to override this default behavior,  the definitions below
+ * indicates the setting of corresponding MFPR bits
+ *
+ * Definition       pull_sel  pullup_en  pulldown_en
+ * MFPR_PULL_NONE       0         0        0
+ * MFPR_PULL_LOW        1         0        1
+ * MFPR_PULL_HIGH       1         1        0
+ * MFPR_PULL_BOTH       1         1        1
+ * MFPR_PULL_FLOAT	1         0        0
+ */
+#define MFPR_PULL_NONE		(0)
+#define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
+#define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
+#define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
+#define MFPR_PULL_FLOAT		(MFPR_PULL_SEL)
+
+/* mfp_spin_lock is used to ensure that MFP register configuration
+ * (most likely a read-modify-write operation) is atomic, and that
+ * mfp_table[] is consistent
+ */
+static DEFINE_SPINLOCK(mfp_spin_lock);
+
+static void __iomem *mfpr_mmio_base;
+
+struct mfp_pin {
+	unsigned long	config;		/* -1 for not configured */
+	unsigned long	mfpr_off;	/* MFPRxx Register offset */
+	unsigned long	mfpr_run;	/* Run-Mode Register Value */
+	unsigned long	mfpr_lpm;	/* Low Power Mode Register Value */
+};
+
+static struct mfp_pin mfp_table[MFP_PIN_MAX];
+
+/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
+static const unsigned long mfpr_lpm[] = {
+	MFPR_LPM_INPUT,
+	MFPR_LPM_DRIVE_LOW,
+	MFPR_LPM_DRIVE_HIGH,
+	MFPR_LPM_PULL_LOW,
+	MFPR_LPM_PULL_HIGH,
+	MFPR_LPM_FLOAT,
+	MFPR_LPM_INPUT,
+};
+
+/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
+static const unsigned long mfpr_pull[] = {
+	MFPR_PULL_NONE,
+	MFPR_PULL_LOW,
+	MFPR_PULL_HIGH,
+	MFPR_PULL_BOTH,
+	MFPR_PULL_FLOAT,
+};
+
+/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
+static const unsigned long mfpr_edge[] = {
+	MFPR_EDGE_NONE,
+	MFPR_EDGE_RISE,
+	MFPR_EDGE_FALL,
+	MFPR_EDGE_BOTH,
+};
+
+#define mfpr_readl(off)			\
+	__raw_readl(mfpr_mmio_base + (off))
+
+#define mfpr_writel(off, val)		\
+	__raw_writel(val, mfpr_mmio_base + (off))
+
+#define mfp_configured(p)	((p)->config != -1)
+
+/*
+ * perform a read-back of any valid MFPR register to make sure the
+ * previous writings are finished
+ */
+static unsigned long mfpr_off_readback;
+#define mfpr_sync()	(void)__raw_readl(mfpr_mmio_base + mfpr_off_readback)
+
+static inline void __mfp_config_run(struct mfp_pin *p)
+{
+	if (mfp_configured(p))
+		mfpr_writel(p->mfpr_off, p->mfpr_run);
+}
+
+static inline void __mfp_config_lpm(struct mfp_pin *p)
+{
+	if (mfp_configured(p)) {
+		unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
+		if (mfpr_clr != p->mfpr_run)
+			mfpr_writel(p->mfpr_off, mfpr_clr);
+		if (p->mfpr_lpm != mfpr_clr)
+			mfpr_writel(p->mfpr_off, p->mfpr_lpm);
+	}
+}
+
+void mfp_config(unsigned long *mfp_cfgs, int num)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	for (i = 0; i < num; i++, mfp_cfgs++) {
+		unsigned long tmp, c = *mfp_cfgs;
+		struct mfp_pin *p;
+		int pin, af, drv, lpm, edge, pull;
+
+		pin = MFP_PIN(c);
+		BUG_ON(pin >= MFP_PIN_MAX);
+		p = &mfp_table[pin];
+
+		af  = MFP_AF(c);
+		drv = MFP_DS(c);
+		lpm = MFP_LPM_STATE(c);
+		edge = MFP_LPM_EDGE(c);
+		pull = MFP_PULL(c);
+
+		/* run-mode pull settings will conflict with MFPR bits of
+		 * low power mode state,  calculate mfpr_run and mfpr_lpm
+		 * individually if pull != MFP_PULL_NONE
+		 */
+		tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
+
+		if (likely(pull == MFP_PULL_NONE)) {
+			p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+			p->mfpr_lpm = p->mfpr_run;
+		} else {
+			p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+			p->mfpr_run = tmp | mfpr_pull[pull];
+		}
+
+		p->config = c; __mfp_config_run(p);
+	}
+
+	mfpr_sync();
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+unsigned long mfp_read(int mfp)
+{
+	unsigned long val, flags;
+
+	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+	val = mfpr_readl(mfp_table[mfp].mfpr_off);
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+
+	return val;
+}
+
+void mfp_write(int mfp, unsigned long val)
+{
+	unsigned long flags;
+
+	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+	mfpr_writel(mfp_table[mfp].mfpr_off, val);
+	mfpr_sync();
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void __init mfp_init_base(void __iomem *mfpr_base)
+{
+	int i;
+
+	/* initialize the table with default - unconfigured */
+	for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
+		mfp_table[i].config = -1;
+
+	mfpr_mmio_base = mfpr_base;
+}
+
+void __init mfp_init_addr(struct mfp_addr_map *map)
+{
+	struct mfp_addr_map *p;
+	unsigned long offset, flags;
+	int i;
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	/* mfp offset for readback */
+	mfpr_off_readback = map[0].offset;
+
+	for (p = map; p->start != MFP_PIN_INVALID; p++) {
+		offset = p->offset;
+		i = p->start;
+
+		do {
+			mfp_table[i].mfpr_off = offset;
+			mfp_table[i].mfpr_run = 0;
+			mfp_table[i].mfpr_lpm = 0;
+			offset += 4; i++;
+		} while ((i <= p->end) && (p->end != -1));
+	}
+
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void mfp_config_lpm(void)
+{
+	struct mfp_pin *p = &mfp_table[0];
+	int pin;
+
+	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+		__mfp_config_lpm(p);
+}
+
+void mfp_config_run(void)
+{
+	struct mfp_pin *p = &mfp_table[0];
+	int pin;
+
+	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+		__mfp_config_run(p);
+}